Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 379

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	7f0f
authors	Naai-Jung, S.
year	1996
title	A study of 2D- and 3D-oriented architectural drawing production methods
source	Automation in Construction 5 (4) (1996) pp. 273-283
summary	The purpose of this paper is to present drawing production methods based on the difference between 2D- and 3D-oriented approaches. This study emphasizes the comparison of the two approaches in data production, updating and analysis. Architectural CAD drawings are outputted from design information through a computational interface. A drawing production model (P) can be represented by a database (DB) and an interface (I). The input interface is the input or update method between users and application systems. The output interface is the method of presenting architecture drawings like plans, elevations, sections and details based on input data. Under the constraints of a predefined data structure, the computational interface determines the efficiency and characteristics of input and output data. Drawing production methods can be classified into three types: segregating drawing files, applying reference files and constructing a virtual building model. These types come with different interfaces: 2D drafting has the same input and output interface, whereas constructing a 3D model is achieved using a different interface. A digital building model is defined as the electronic information of a whole building which is assembled by components with attributes. 2D- and 3D-oriented drawing methods are compared, based on items such as the required preparation before drafting, consistency of plans, elevations and sections, ease of modification, drafting efficiency, number of persons involved, and analysis potential.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	a026
authors	Nagakura, Takehiko
year	1996
title	Form Processing: A System for Architectural Design
source	Harvard University
summary	This thesis introduces a new approach to developing software for formal synthesis in architectural design. It presents theoretical foundations, describes prototype specifications for computable implementation, and illustrates some examples. The approach derives from the observation that architects explore ideas through the use of sequences of drawings. Architects derive each drawing in a sequence from its predecessor by executing some transformation on a portion of the drawing. Thus, a formal design state is established by a sequence of drawings with historical information about their construction through progressive transformations. The proposed system allows an architect to develop a design in three ways. First, a new transformation can be added to a current sequence of drawings. Second, existing sequences can be edited by exchanging their subset sequences. Third, an existing sequence can be revised parametrically by assigning new values to its design variables. The system implements scripts that specify categories of shapes and transformations between any two shape categories. When an instance of a shape category is found in a design, a transformation can replace it with an instance of another shape category. Recursive application of a given set of transformations to an initial shape instance produces a sequence of drawings that represents a formal design state. The system encodes this formal design state as an assembly of all the shape instances used and their relationships (nesting, emergent and replacement). Furthermore, this assembly, called a construction graph, allows the existing sequences to be edited efficiently by exchanging subsets and to be revised parametrically. The advantage of this approach as demonstrated in the examples is that it allows intuitive, rapid and interactive construction of complex designs. Moreover, design knowledge can be captured by scripts that depict heuristic shapes and transformations as well as by assembled construction graphs which depict cases of formal design. Such a reusable and expandable knowledge base is essential for assisting disciplined and creative architectural design.
keywords	Computer Software Development; Architectural Design; Data Processing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	7135
authors	Arumi-Noe, F.
year	1996
title	Algorithm for the geometric construction of an optimum shading device
source	Automation in Construction 5 (3) (1996) pp. 211-217
summary	Given that there is a need to shade a window from the summer sun and also a need to expose it to the winter sun, this article describes an algorithm to design automatically a geometric construct that satisfies both requirements. The construct obtained represents the minimum solution to the simultaneous requirements. The window may be described by an arbitrary convex polygon and it may be oriented in any direction, and it may be placed at any chosen latitude. The algorithm consists of two sequential steps: first to find a winter solar funnel surface; and the second to clip the surface subject to the summer shading conditions. The article introduces the design problem, illustrates the results through two examples, outlines the logic of the algorithm and includes the derivation of the mathematical relations required to implement the algorithm. This work is part of the MUSES project, which is a long term research effort to integrate Energy Consciousness with Computer Graphics in Architectural Design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	275b
authors	Chase, Scott C.
year	1996
title	Design Modeling With Shape Algebras and Formal Logic
doi	https://doi.org/10.52842/conf.acadia.1996.099
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 99-113
summary	A new method of describing designs by combining the paradigms of shape algebras and predicate logic representations is presented. Representing shapes and spatial relations in logic provides a natural, intuitive method of developing complete computer systems for reasoning about designs. The advantages of shape algebra formalisms over more traditional representations of geometric objects are discussed. The method employed involves the definition of a large set of high level design relations from a small set of simple structures and spatial relations. Examples in architecture and geographic information systems are illustrated.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	9a0d
authors	Debevec, P.E., Taylor, C.J. and Malik, J.
year	1996
title	Modeling and rendering architecture from photographs: a hybrid geometry- and image-based approach
source	SIGGRAPH'96, New Orleans, Louisiana
summary	We present a new approach for modeling and rendering existing architectural scenes from a sparse set of still photographs. Our modeling approach, which combines both geometry-based and imagebased techniques, has two components. The first component is a photogrammetricmodelingmethodwhich facilitates the recovery of the basic geometry of the photographed scene. Our photogrammetric modeling approach is effective, convenient, and robust because it exploits the constraints that are characteristic of architectural scenes. The second component is a model-based stereo algorithm, which recovers how the real scene deviates from the basic model. By making use of the model, our stereo technique robustly recovers accurate depth from widely-spaced image pairs. Consequently, our approach canmodel large architectural environmentswith far fewer photographs than current image-based modeling approaches. For producing renderings, we present view-dependent texture mapping, a method of compositing multiple views of a scene that better simulates geometric detail on basic models. Our approach can be used to recover models for use in either geometry-based or image-based rendering systems. We present results that demonstrate our approach's ability to create realistic renderings of architectural scenes from viewpoints far from the original photographs.
series	other
last changed	2003/04/23 15:50

_id	20ff
id	20ff
authors	Derix, Christian
year	2004
title	Building a Synthetic Cognizer
source	Design Computation Cognition conference 2004, MIT
summary	Understanding ‘space’ as a structured and dynamic system can provide us with insight into the central concept in the architectural discourse that so far has proven to withstand theoretical framing (McLuhan 1964). The basis for this theoretical assumption is that space is not a void left by solid matter but instead an emergent quality of action and interaction between individuals and groups with a physical environment (Hillier 1996). In this way it can be described as a parallel distributed system, a self-organising entity. Extrapolating from Luhmann’s theory of social systems (Luhmann 1984), a spatial system is autonomous from its progenitors, people, but remains intangible to a human observer due to its abstract nature and therefore has to be analysed by computed entities, synthetic cognisers, with the capacity to perceive. This poster shows an attempt to use another complex system, a distributed connected algorithm based on Kohonen’s self-organising feature maps – SOM (Kohonen 1997), as a “perceptual aid” for creating geometric mappings of these spatial systems that will shed light on our understanding of space by not representing space through our usual mechanics but by constructing artificial spatial cognisers with abilities to make spatial representations of their own. This allows us to be shown novel representations that can help us to see new differences and similarities in spatial configurations.
keywords	architectural design, neural networks, cognition, representation
series	other
type	poster
email
more	http://www.springer.com/computer/ai/book/978-1-4020-2392-7
last changed	2012/09/17 21:13

_id	maver_088
id	maver_088
authors	Henriques, P., Maver, T. and Retik, A.
year	1996
title	Integration of Cost Planning in the Architectural Design of Housing - "CP/CAD Model"
source	Application of the Performance Concept in Building (Ed: R Becker), vol 1, 2: 105-114
summary	Cost estimation in the initial phases of a project is of great interest to the construction industry. This paper proposes a new way of the integration of an architectural project and its cost estimate so as to optimise the design solutions, according to technical and economic criteria. This work explores the capacity of an elemental cost estimation method for residential buildings, when integrated with Computer Aided Design systems, to increase cost estimate precision during the early stages of design. A Cost Planning and CAD model (CP/CAD) is developed by the integration of a database and a CAD system which provides for the automatic exchange of information relative to the geometric layout of the building, the construction element build-up and the construction costs of the same. Finally the CP/CAD model is tested through the estimation of costs for some theoretical cases and also for a group of one-family houses with similar architectural characteristics. The results show the increased precision and the advantages of the model for cost estimation in the early design stages.
series	other
type	normal paper
email
last changed	2015/02/20 11:37

_id	a022
authors	Hirschberg, U. and Streilein, A.
year	1996
title	CAAD meets digital photogrammetry: modelling _weak forms_ for computer measurement
source	Automation in Construction 5 (3) (1996) pp. 171-183
summary	The integration of state-of-the-art photogrammetric methods with the capabilities of CAAD has great potential for a variety of architectural applications. This paper describes the current status of an ongoing research project which aims to develop an easy to use tool for the photogrammetric generation of accurate, reliable and well structured 3D CAAD models of architectural objects. The project adresses the whole range of issues that arise from the digital image acquisition to the data processing, the data integration between photogrammetry and CAAD and the architectural structuring of the geometric data. While also giving a brief overview of the project, the paper concentrates on one central aspect of the system: a method to model what we will define as 'weak forms' as the basis for qualitatively controlled computer measurement.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	aa7c
authors	Amirante, M. Isabella and Burattini, Ernesto
year	1996
title	Automatic Procedures for Bio-Climatic Control
doi	https://doi.org/10.52842/conf.ecaade.1996.029
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 29-40
summary	The experiences illustrated here are related to the new regulation of teaching architecture in Italy and these ones in particular have been concentrated on the technological aspects of teaching architecture. We can consider the evolution of the architect from the individual operator to the manager multi- disciplinary aspects of the building process ( building process manager) as a reality today. Information technology, specifically applied to bio-climatic architecture and environmental control, can be of great importance for this professional role, and for this reason it is very useful to include these topics at the beginning the teaching design process. This paper describes a particular approach to bio-climatic problems of the architectural project. An experimental course has been performed by the second year students of the "Laboratorio di Construzione dell' Architettura", at the School of Architecture of the Second University of Naples, in Aversa. Analysing old and new buildings, they used some flow charts for the evaluation and representation of energetic behaviour of buildings regarding their climatic and geographical environment. In the flow charts the decisions are represented by boxes that allow to determine "rightness index" related to: morphological characters of the site and environment, typology and particular organisation of the inside spaces, shape of building, technological solution of the building "skin". The navigation through the decision boxes is made with simple options like; "winds: protected or exposed site", "shape of building; free, close or cross plane", "presence of trees on the south,; yes or not",; it shows the students the bio-climatic quality of the building and, through numeric value assigned to each option, determines the "weight" of its climatic comfort.
series	eCAADe
last changed	2022/06/07 07:54

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.041
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	6c97
authors	Asanowicz, Aleksander
year	1996
title	Using the Computer in Analysis of Architectural Form
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 25-34
summary	One of the most important aspects of the designing process is: the design activity is usually conducted with incomplete information. Another important aspect of designing activity is: designing activity is usually based on past experience. As a matter of fact looking at designers in the early conceptual phases, one thing that appears clear is, instead starting from scratch, they spend a part of their time thinking about existing designing experience, reviewing the literature, and so on. That is why explicit representation of designing knowledge is needed if computers are to be used as the aid of design education and practice. Composition knowledge data base will be helpful during an architectural form analysis process as well. It makes possible to provide answers and explanations as well as allowing to view tutorials illustrating the particular problem. On its basic level such a program will present analysis of architectural objects and abstract forms based on subjective criteria. On its upper level allowing further exploration of various architectural composition attributes, as well as their influence on emotional- aesthetic judgements being formed during the process of analysis the architectural form.
series	other
last changed	1999/04/08 17:16

_id	82ff
authors	Bhavnani, S.K., Flemming, U., Forsythe, D.E., Garrett, J.H., Shaw, D.S. and Tsai, A.
year	1996
title	CAD usage in an architectural office: from observations to active assistance
source	Automation in Construction 5 (3) (1996) pp. 243-255
summary	The functionality and resources provided by CAD systems have been increasing rapidly, but productivity growth expected from their use has been difficult to achieve. Although many surveys describe this productivity puzzle, few studies have been conducted on actual CAD users to understand its causes. In an effort to arrive at such an understanding, the first author visited a federal architectural office and observed CAD users in their natural setting. This paper describes preliminary results obtained from the study, which used ethnographic techniques developed by cultural anthropologists. The study revealed that users had leveled-off in their learning and experimentation and were using the CAD system in suboptimal ways. By asking why users were not using many resources available to them to improve performance, the observer uncovered issues of communication and management that needed to be addressed. Based on this understanding, the authors provide explicit recommendations to CAD users and vendors. In addition, they hypothesize that users might benefit from a system that provides active assistance, that is, intervenes spontaneously with advice, assistance, and relevant information while the user interacts with the CAD system. They conclude with some issues revealed by the study that should be considered when developing such active assistance.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	88f9
authors	Carrara, G., Novembri, G., Zorgno, A.M., Brusasco, P.L.
year	1997
title	Virtual Studio of Design and Technology on Internet (I) - Educator's approach
doi	https://doi.org/10.52842/conf.ecaade.1997.x.n2w
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper presents a teaching experience involving students and professors from various universities, in Italy and abroad, which began in 1996 and is still on going. The Virtual Studios on the Internet (VSI) have some features in common with the Teaching Studios planned for the new programme of the faculties of Architecture in Italian universities. These are the definition of a common design theme, and the participation of disciplinary teachers. The greatest difference is in the modes of collaboration, which is achieved through information and communication technologies. The chief result of this is that the various work groups in different places can work and collaborate at the same time: the computer networks provide the means to express, communicate and share the design project.
keywords	CAAD, Teaching of architectural design, Shared virtual reality, Virtualdesign studio, Collective intelligence.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/lvi_i&ii/zorgno.html
last changed	2022/06/07 07:50

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	ab1e
authors	Coyne, R., McLaughlin, S., Newton, S., Sudweeks, F., Haynes, D. and Jumani, A.
year	1996
title	Report on Computers in Practice: A survey of computers in architectural practice
source	UK: University of Edinburgh
summary	This is a report on the dynamic relationship between information technology (IT) and architectural practice. The report summarises the attitudes and opinions of practitioners gathered through extensive recorded interviews, and compares these attitudes and opinions with the findings of other studies. The report is compiled from the point of view of an understanding of appropriating as preceding as the model for understanding. We thereby connect what is going on in IT with concepts currently under discussion in postmodern thought and in the tradition of philosophical pragmatism. We identify several of the major options identified by practitioners in their use of IT, including practicing without computers, substituting computers for traditional tasks, delivering traditional services in an innovative way through IT, and developing new services with IT. We also demonstrate how firms are changing and are being shaped by the market for architectural services. One of the major areas of change is in how IT and related resources are managed. We also consider how the role of the practitioner as an individual in a firm is changing along with changes in IT, and how different prognoses about the future of IT in practice are influenced by certain dominant metaphors. Our conclusion is that IT is best understood and appropriated when it is seen as fitting into a dynamic field or constellation of technologies and practices. Such an orientation enables the reflective practitioner to confront what is really going on as IT interacts with practice. praxis- practice theory
series	report
last changed	2003/04/23 15:50

_id	eb51
authors	Coyne, Richard
year	1996
title	CAAD, Curriculum and Controversy
doi	https://doi.org/10.52842/conf.ecaade.1996.121
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 121-130
summary	This paper brings some of the debate within educational theory to bear on CAAD teaching, outlining the contributions of conservatism, critical theory, radical hermeneutics and pragmatism. The paper concludes by recommending that CAAD teaching move away from conservative concepts of teaching, design and technology to integrate it into the studio. In a highly illuminating book on education theory, Shaun Gallagher (1991) outlines four current views on education that correspond to four major positions in contemporary social theory and philosophy. I will extend these categories to a consideration of attitudes to information technology, and the teaching of computing in architecture. These four positions are conservatism, critical theory, radical hermeneutics, and pragmatism. I will show how certain issues cluster around them, how each position provides the focus of various discursive practices, or intellectual conversations in contemporary thinking, and how information technology is caught up in those conversations. These four positions are not "cognitive styles," but vigorously argued domains of debate involving writers such as Gadamer, Habermas and Derrida about the theory of interpretation. The field of interpretation is known as hermeneutics, which is concerned less with epistemology and knowledge than with understanding. Interpretation theory applies to reading texts, interpreting the law, and appreciating art, but also to the application of any practical task, such as making art, drawing, defining and solving problems, and design (Coyne and Snodgrass, 1995). Hermeneutics provides a coherent focus for considering many contemporary issues and many domains of practice. I outline what these positions in education mean in terms of CAAD (computer-aided architectural design) in the curriculum.
series	eCAADe
email
more	http://www.caad.ac.uk/~richard
last changed	2022/06/07 07:56

_id	911c
authors	Darken, Rudolph P.
year	1996
title	Wayfinding in Large-Scale Virtual Worlds
source	George Washington University
summary	As important as navigation is to human performance in virtual worlds, it is an often overlooked problem in the design process. This dissertation reports an experiment intended to show that real-world wayfinding and environmental design principles are effective in designing virtual worlds which support skilled wayfinding behavior. The design principles are adapted from both the cognitive psychology literature and urban and architectural design methodologies. There are two categories of design principles; those that guide the organizational structure of the environment, and those that guide the use and presentation of maps. The study measures subject performance on a complex searching task in a number of virtual worlds with differing environmental cues. The environments are extremely large and consist of open sea, land, and ships which are used as targets for search tasks. The worlds are augmented with either a radial grid, a map, both, or neither. For each trial, the subject's viewpoint position and orientation was sampled approximately once per second. A verbal protocol with accompanying video was used to elicit information about the search strategies employed. A map drawing exercise followed each trial in order to gain insight to the subject's spatial knowledge (i.e. cognitive map) of the environment. The results show that subjects in the treatment without any additional cues were often disoriented and had extreme difficulty completing the task. The grid was shown to provide superior directional information but both treatments using the map were superior overall due to the geocentric perspective provided. Behaviors associated with each treatment indicate that the cues had a strong effect on both search performance and search strategy. The results suggest that users of large-scale virtual worlds require structure in order to effectively navigate. Augmentations such as direction indicators, maps, and path restriction can all greatly improve both wayfinding performance and overall user satisfaction.
series	thesis:PhD
email
more	http://www.seas.gwu.edu/~sibert/darken/publications/Dissertation_95/thesis.html
last changed	2003/02/12 22:37

_id	6941
authors	Dawidowski, Robert
year	1996
title	CAD - The Step Towards the Aim as a Lot of Others or Something Else
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 53-58
summary	Right and left for years we have been swamped by information on equipment and software which is supposed change the quality and a designers' work style completely. In this computer and commercial deluge of words it is more and more difficult to get an understanding and clear attitude towards the dynamicly changing reality. Apart from the details of the CAD software and its influence on the effects of the architectural creative process, I would like to consider some problems connected with the influence of the CAD system on the architect's creative capabilities. Does it develope or limit these capabilities? Is a computer equipped with a CAD system a special tool (meaning the new values which it might give) or is it not?
series	plCAD
last changed	1999/04/09 15:30

_id	6abd
authors	Dawson, Anthony and Burry, Mark
year	1996
title	The Continuing Dichotomy: Practice vs. Education
doi	https://doi.org/10.52842/conf.ecaade.1996.131
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 131-142
summary	While it is apparent from the architectural literature that some practices are innovative in their use of computers for architectural design, clear evidence indicates that most architectural practices have applied computing to traditional practice paradigms. Information technology is therefore being applied to practice systems which were in place prior to computers being available. This has significant implications for architectural education in which there is tension developing between the requirements of the commercially oriented architectural practice and the innovation driven computer-aided architectural design educator. The first wishes to equip graduates for immediate and productive employment in computerised architectural practices and may be loosely interpreted as a graduate’s ability to work as a CAD operator within an architectural practice environment. The second has the desire for students to be innovative in their use of information technology as an aid in informing and evaluating parts of both the design process and its outcomes. However, it is only when both architects and educators identify the architectural process as an integrated information system that these tensions can be resolved. This requires reconsideration of the function and use of information technology in both educational institutions and in architectural practices. The paper discusses how fruitful this can be in the current environment and outlines current developments at Deakin University which aim at providing a middle ground
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: