Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 115

Reformat results as: short short into frame detailed detailed into frame

_id	ddssup9601
id	ddssup9601
authors	Aoke, Yoshitsugu and Muraoka, Naoto
year	1996
title	An optimization method of the facility location by genetic algorithm
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	In planning of community-facilities, it is important to decide the facility location to provide the effective service for residents. The behavior of residents using the facility and the evaluation methods of the location have been studied. But, finding the optimum location is very hard in actual planning because the volume of calculation depends on the number of feasible locating points of facilities. To conquer the difficulty of searching the optimum location, we propose an optimization method using Genetic Algorithm. An alternative of location is expressed by a chromosome. Each chromosome consists of genes, and each gene expresses a located zone of the facility. We gave definitions of genetic procedures; crossing-over, mutation and selection. Alternatives of the facility location are generated by these genetic procedures like as life evolution. For each alternative, the behaviors of users are estimated by a spatial-interaction model, and the facilities that residents in each place choose are determined. The effectiveness of the location is measured by a total sum of distances between the facility and the user. After the confirmation of the effectiveness of our method by applying on ideal example problems, we applied it on the actual problem in Japanese town. By this method we could find the optimum location in about one-third time and effort as compared with the ordinal method.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup9602
id	ddssup9602
authors	Arentze, T.A., Borgers, A.W.J. and Harry J.P.
year	1996
title	A knowledge-based model for developing location strategies in a DSS for retail planning
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Most DSS for retail planning are based on impact assessment models to support the evaluation of plan scenario's. This paper introduces a complementary knowledge-based model to support also the earlier stage of formulating plan scenario's. An analysis of the retail planning problem reveals the main lines of the strategies adopted by most Dutch planners and retailers to achieve their goals. A basic strategy that seems to be appropriate in most problem contexts is formulated in the form of a set of decision tables. Each decision table or system of decision tables specifies for a problem area decision rules to identify and analyse problems and to formulate possible actions. The model is implemented in a DSS where it is used in combination with quantitative impact assessment models. A case study in the area of daily good facilities demonstrates the approach. The major conclusion is that the knowledge-based approach and in particular the decision table technique provides interesting possibilities to implement planning task structures in a DSS environment.
series	DDSS
last changed	2003/11/21 15:16

_id	ddssar9611
id	ddssar9611
authors	de Gelder, Johan and Lucardie, Larry
year	1996
title	Criteria for the Selection of Conceptual Modelling Languages for Knowledge Based Systems
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	In recent years knowledge is increasingly recognised as a critical production factor for organisations. Performance of activities such as designing, diagnosing, advising and decision making, depend on the availability and accessibility of knowledge. However, the increasing volume and complexity of knowledge endangers its availability and accessibility. By their knowledge processing competence, knowledge based systems containing a structured and explicit representation of knowledge, are expected to solve this problem. In the realisation of a knowledge based system, the phase in which a knowledge model is reconstructed through a conceptual language, is essential. Because the knowledge model has to be an adequate reflection of real-world knowledge, the conceptual language should not only offer sufficient expressiveness for unambiguous knowledge representation, but also provide facilities to validate knowledge on correctness, completeness and consistency. Furthermore, the language should supply facilities to be processed by a computer. This paper discusses fundamental criteria to select a conceptual language for modelling the knowledge of a knowledge based system. It substantiates the claim that the selection depends on the nature of the knowledge in the application domain. By analysing the nature of knowledge using the theory of functional object-types, a framework to compare, evaluate and select a conceptual language is presented. To illustrate the selection process, the paper describes the choice of a conceptual language of a knowledge based system for checking office buildings on fire-safety demands. In this application domain, the language formed by decision tables has been selected to develop the conceptual model. The paper provides an in-depth motivation why decision tables form the best language to model the knowledge in this case.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9606
id	ddssar9606
authors	Doughty, D.C. and Zwirner, W.G.
year	1996
title	Spa Hotels and Facilities - a Comparison of Hotels in Budapest, Buxton and Piestany
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	In Britain, health and leisure tourism seems primarily to mean leisure with health being normally merely a secondary consideration ranging from fresh air to diet. In central Europe Spas still draw tourists and patients for leisure and for treatments from their own as well as neighbouring countries. Indeed, whilst Buxton, Bath, Harrogate and Leamington draw day trippers to see their historic buildings, Carlsbad, Budapest, Piestany and many of the other grand old Spas of central Europe are filled with longer-term guests seeking an improvement to their own chronic ailments. The reasons for this decline in British Spas and the continuing relative good health of Spas in central Europe are a complex mix that includes national characteristic, financial constraints and a disbelief by the British medical establishment in the efficacy of the water cure and related Spa treatments. This reluctance to acknowledge complementary health care is certainly not the case in Germany and the old Austro-Hungarian lands and Spa tourism presents a challenge as well as a promise of lucrative international tourism to the emerging "new" states of pre-communist Europe.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9612
id	ddssar9612
authors	Gorawara-Bhat, Rita
year	1996
title	The physical context of social order
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The present ethnographic study of work settings in an established survey research center (Midwest Survey) is unique in that it combines both social organizational specifcs j4 interior physical context in contrast to previous studies that have focussed either on physical aspects or on the social dimensions of work settings. For more than four years the author observed the spatial adaptation by personnel of Midwest Survey. The dates under consideration roughly coincide with a move of Midwest Survey from an original facility to a new (and larger) set of offices. Anchored by seventy three open-ended interviews (constituing roughly 30% of the staff) the observations were carried on during and after the interviews. The synthesis of the ethnographic material revealed that physical settings act not only as a background for facilities, but they become a salient aspect of work life as indicators of status /role congruency and incongruency. Physical settings, therefore, are proposed as "extension" attributes of role structure. In doing so, Nadel's conceptualization of role structure as comprising pivotal arid peripheral attributes (1957) is amplified to include the physical setting as an "extension" attribute. Theoretical and practical implications of the study are suggested.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup9615
id	ddssup9615
authors	Lucardie, L., de Gelder, J. and Duursma, C.
year	1996
title	Matching the Knowledge Needs of Trade and Industry: Advanced and Operational Knowledge Based Systems
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Complex tasks that are being performed in trade and industry such as diagnosis, engineering and planning, increasingly require rapid and easy access to large amounts of complicated knowledge. To cope with these demands on trade and industry, advanced automated support for managing knowledge seems to be needed. Knowledge based systems are claimed to match these needs. However, to deal with the vast volume and complexity of knowledge through knowledge based systems, preconditions at three computer systems levels should be fulfilled. At the first level, called the knowledge level, the development of knowledge based systems requires a well-elaborated theory of the nature of knowledge that helps to get a clear and consistent definition of knowledge. By providing guidelines for selecting and developing methodologies and for organising the mathematical functions underlying knowledge representation formalisms, such a definition significantly advances the process of knowledge engineering. Here, we present the theory of functional object-types as a theory of the nature of knowledge. At the second level, called the symbol level, the representation formalisms used must be compatible with the chosen theory of the nature of knowledge. The representation formalisms also have to be interpretable as propositions representing knowledge, so that their knowledge level import can be assessed. Furthermore, knowledge representation formalisms have to play a causal role in the intelligent behaviour of the knowledge based system. At the third level, called the systems level, a knowledge based system should be equipped with facilities that enable an effective management of the representation formalisms used. Yet other system facilities are needed to allow the knowledge base to communicate with existing computer systems used in the daily practice of trade and industry, for instance Database Management Systems, Geographical Information Systems and Computer Aided Design Systems. It should be taken into account that these systems may run in different networks and on different operating systems. A real-world knowledge based system that operates in the field of soil contamination exemplifies the development of an advanced and operational knowledge-based system that complies with the preconditions at each computer systems level.
series	DDSS
last changed	2003/08/07 16:36

_id	44cc
authors	Martens, Bob (ed.)
year	1996
title	Full-scale Modeling in the Age of Virtual Reality
source	Proceedings of the 6th European Full-scale Modeling Association Conference / ISBN 3-85437-132-2 / Vienna (Austria) 4-6 September 1996, 140 p.
summary	In times characterized by the growing "architectural criticism"; to the same extent as by the helplessness of the anonymous user the communication process between contractors, planner and users gains in importance. If communication is successful will not only depend on the quality of the project but also on the means of conveyance, e.g. visualizing or model representation. Can planning evaluation be effectively supported by virtual reality (VR)? The principal item of a full-scale lab preferably features a court-like facility where the 1:1 simulations are performed. Such lab facilities can be found at various architecture education centers throughout Europe. In the early eighties the European Full-scale Modeling Association (abrev. EFA, full-scale standing for 1:1 or simulation in full-scale) was founded acting as the patron of a conference every two years. In line with the conference title "Full-scale Modeling in the Age of Virtual Reality" the participants were particularly concerned with the relationship of physical 1:1 simulations and VR. The assumption that those creating architecture provide of a higher degree of affinity to physical than to virtual models and prototypes was subject of vivid discussions. Furthermore, the participants devoted some time to issues such as the integration of model-like ideas and built reality thus uncovering any such synergy-effects. Thus some major considerations had to be given to the question of how the architectís model-like ideas and built reality would correspond, also dealing with user-suitability as such: what the building artist might be thrilled with might not turn out to be the residentsí and usersí everyday delight. Aspects of this nature were considered at the îArchitectural Psychology Meeting” together with specialists on environment and aesthetics. As individual space perception as well as its evaluation differ amongst various architects, and these being from various countries furnishing cultural differences, lively discussions were bound to arise.
keywords	VR, Virtual Reality, Simulation in Full-scale, Model Simulation, Real Environments
series	other
email
more	http://info.tuwien.ac.at/efa/EFA-Proceedings.html
last changed	2003/08/25 10:12

_id	ddssar9628
id	ddssar9628
authors	Shabha, G. and Orr, K.
year	1996
title	The Impacts of Facilities Management Techniques on the Operational Efficiency of School Buildings- An Assessment of Grant Maintained Schools
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	This paper attempts to examine the main benefits and pitfalls of FM as applied to Grant Maintained Schools (UMS) by assessing its implications on selected school buildings. It seeks to address a number of questions regarding the desirability of this method as applied to GMS. On what assumption has GMS model been based? To what extent has this model affected their operational efficiency? What are the financial implications? What are the future prospects? The main findings are that FM has provided new opportunities in the educational sector. Despite the economical uncertainty, it is highly likely that local control will remain. Giving the state of disrepair of many system-built schools of the 50's and the 60's, there are many opportunities for the FM to be exploited including condition survey, refurbishment of external envelope of the building, preventative maintenance, space utilisation and consultancy on meeting the EU health and safety legislation.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9629
id	ddssar9629
authors	Shabha, G. and Rudge, D.
year	1996
title	Is Uniformity the Key to Flexibility? A Post-Occupancy Evaluation of School Buildings
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Flexibility and efficiency are two fundamental concepts in the planning of school buildings. This paper is being set to investigate the theoretical and practical links between the two. It seeks to address a number of questions: What constitutes an efficient and flexible school building? What is the optimal range and size of teaching areas to maximise flexibility? In what way can teaching areas be optimised to enhance their efficiency in use? Attempting to address these questions, an in-depth review of the relevant literature will be undertaken to analyse and refine the size of different teaching areas. Later, some operational measures of uniformity of areas and flexibility will be refined and established. These will be applied on selected school buildings to assess the their adequacy to accommodate change over use. The main outcome of this study is to provide an insight about the general rules of design for flexibility and efficiency. It also provides a framework for architects, surveyors and facilities managers to improve space efficiency in school buildings. This might enhance the process of space planning and management and improve the operational efficiency of other building types.
series	DDSS
last changed	2003/08/07 16:36

_id	9e3d
authors	Cheng, F.F., Patel, P. and Bancroft, S.
year	1996
title	Development of an Integrated Facilities Information System Based on STEP - A Generic Product Data Model
source	The Int. Journal of Construction IT 4(2), pp.1-13
summary	A facility management system must be able to accommodate dynamic change and based on a set of generic tools. The next generation of facility management systems should be STEP conforming if they are to lay the foundation for fully integrated information management and data knowledge engineering that will be demanded in the near future in the new era of advanced site management. This paper describes an attempt to meet such a specification for an in-house system. The proposed system incorporates the latest technological advances in information management and processing. It pioneered an exchange architecture which presents a new class of system, in which the end-user has for the first time total flexibility and control of the data never before automated in this way.
series	journal paper
last changed	2003/05/15 21:45

_id	9613
authors	Day, A., Bourdakis, V. and Robson, J.
year	1996
title	Living with a Virtual City
source	Architectural Research Quarterly, Vol 2. pp. 84-91
summary	Computer models of entire cities are becoming increasingly common. The uses to which these models are put are varied and include the visualisation of proposed changes, the marketing of the facilities a city has to offer and the mapping of socio-economic data. Developments in the Internet mean that city models can be widely accessed and computer hardware and software have developed to the point where it is possible to both construct and view these models on personal computers. This paper discusses some issues relating to the construction and use of large urban models and draws upon the authors' experience of constructing the Bath computer model which remains one of the most detailed in the world.
series	journal paper
email
last changed	2003/04/23 15:50

_id	5570
authors	Mahnke, Frank H.
year	1996
title	Color, environment, and human response: an interdisciplinary understanding of color and its use as a beneficial element in the design of the architectural environment
source	Van Nostrand Reinhold, New York
summary	Written for architects, interior designers, and color consultants, this ambitious study explores the psychological and physiological effects of color in the man-made environment. Scientific findings and industry-by-industry examples are furnished to help professionals specify colors that will create healthful environments in hospitals, schools, restaurants, and other public facilities.
series	other
last changed	2003/04/23 15:14

_id	maver_080
id	maver_080
authors	Maver, T.W. and Chen, Y.
year	1996
title	The Design and Implementation of a Virtual Studio Environment
source	Proceedings of 2nd East-West Conference on Information Technology in Design, 126-137
summary	In this paper the authors describe the design and implementation of a virtual studio environment a distribute system for design collaboration across time and space. A virtual studio is defined as an electronic locale i the computer networks, containing distributed resources (both domain-specific design artifacts and generic Computer-Mediated Communication facilities) and inhabited by dispersed designers, whilst the virtual studj0 environment (VSE) refers to such a multi-user environment which supports the creation, operation and management of virtual studios. We'll particularly focus on reporting on the requirement analysis for a VS: the distributed system architecture, the design of the virtual studio model, and the implementation of the VSE server and VSE client programs. Conceptual buildingS design has been chosen as the application domain Advanced distributed computing technologies (CORBA, WWW) have been utilised for the prototyping.
series	other
email
last changed	2003/09/03 15:01

_id	maver_084
id	maver_084
authors	Maver, T.W., Frame, I. and Chen, Y.
year	1996
title	The Development of a Virtual Studio Environment to Support Collaborative Building Design
source	Design, Synergy, Collaboration - selected papers from DEcon Conference
summary	This paper describes the development of a virtual studio environment to support collaborative working in the domain of building design. By applying and extending the real-world design studio model within the Internet-based distributed computing environments, the virtual studio concept has been refined as computerised settings, which integrate both the dispersed human designers and the distributed CAD applications. The hope is to achieve the similar effect as physical co-presence while providing extra advantages such as the support for automatic communication archiving and being less obtrusive than sharing a physical office. Like its real-world counterpart (which usually consists of the office, desks, file cabinets, instruments etc), such a virtual studio consists of the several major components, including a multi-user graphical user interface displaying the shared virtual workspace on each designer's workstation, distributed multimedia databases and CAD tools for processing the domain tasks, and rich human-human interaction facilities supporting a variety of communication modes. Advance distributed object computing technologies (0MG CORBA in particular) have been adopted for modelling and implementing the distributed systems, W3 (world-wide-web) technologies have also been exploited for constructing the distributed multi-media databases and an image communication kit. In contrast to the traditional CAD integration which is usually focused solely on the well-structured technical part of the product and process, the described research advocates a human-centred systems development strategy in which design is first of all taken as a process of social construction.
series	other
email
last changed	2003/09/03 15:01

_id	8804
authors	QaQish, R. and Hanna, R.
year	1997
title	A World-wide Questionnaire Survey on the Use of Computers in Architectural Education
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.c8o
summary	The paper reports on a study which examines the impact on architectural education needs arising from the changes brought about by the implications of CAD teaching/learning (CAI/CAL). The findings reflect the views of fifty-one (51) architecture schools through a world-wide questionnaire survey conducted in mid 1996. The survey was structured to cover four continents represented by seven countries, namely the USA, UK, Israel, Australia, Canada, Sweden and the Netherlands. Structurally the main findings of this study are summarised under five areas, namely: 1) General Information, 2) Program of Study (curriculum) and CAD course, 3) CAD Laboratories: Hardware, Software, 4) Departmental Current and Future Policies, 5) Multi-media and Virtual Reality. Principally, there were three main objectives for using the computers survey. Firstly, to accommodate a prevalent comprehension of CAD integration into the curriculum of architecture schools world wide. Secondly, to identify the main key factors that control the extent of association between CAD and architectural curriculum. Thirdly, to identify common trends of CAD teaching in Architecture schools world-wide and across the seven countries to establish whether there are any association between them. Several variables and factors that were found to have an impact on AE were examined, namely: the response rate, the conventional methods users and the CAD methods users amongst students, CAD course employment in the curriculum, age of CAD employment, the role of CAD in the curriculum, CAD training time in the Curriculum, CAD laboratories/Hardware & Software, computing staff and technicians, department policies, Multi-Media (MM) and Virtual-Reality (VR). The statistical analysis of the study revealed significant findings, one of which indicates that 35% of the total population of students at the surveyed architecture schools are reported as being CAD users. Out of the 51 architecture schools who participated in this survey, 47 have introduced CAD courses into the curriculum. The impact of CAD on the curriculum was noted to be significant in several areas, namely: architectural design, architectural presentation, structural engineering, facilities management, thesis project and urban design. The top five CAD packages found to be most highly used across universities were, namely, AutoCAD (46), 3DStudio (34), Microstation (23), Form Z (17), ArchiCAD (17). The findings of this study suggest some effective and efficient future directions in adopting some form of effective CAD strategies in the curriculum of architecture. The study also serves as an evaluation tool for computing teaching in the design studio and the curriculum.
keywords	CAD Integration, Employment, Users and Effectiveness
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/qaqish/qaqish.htm
last changed	2022/06/07 07:50

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	31f5
authors	Alfares, M. and Seireg, A.
year	1996
title	An integrated system for computer-aided design and construction of reinforced concrete buildings using modular forms
source	Automation in Construction 5 (4) (1996) pp. 323-341
summary	The study reported in this paper investigates the feasibility of automating the on-site construction of reinforced concrete residential buildings. The basic construction tasks are identified, analyzed and modified with a view towards potential for automation. Emphasis is placed on developing modular forms that facilitate automation. The majority of work in the field of construction robotics has focused on the adaptation of existing industrial robots to automate traditional construction processes. This paper outlines a computer-aided construction system approach specially suited for integrating design and implementation by on-site robots. A Computer-Integrated Construction (CIC) system, similar to CIM, is developed that includes a CIC data-base, a construction design system, a construction production/process planning system, and a robotics execution system. This approach is intended to minimize the redesign effort as well as the need for on-site manual work.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssup9603
id	ddssup9603
authors	Bach, Boudewijn and MacGillivray, Trina
year	1996
title	Semi-manual design support for increasing railwaystation catchment & sustainable traffic routing
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The shape ('configuration'), location and direction of the pattern of potential trips by foot or bicycle can help decision makers and designers:- the shape of such a pattern informs about the potential size of a traffic calming area(such as 30Km-zoning),- the location of such a pattern refers to the user-groups and specific destinations that a urban network should bring in safe reach for dictated groups,- the direction of such a pattern, together with shape and location, points to the best routing to raise the Sustainable Traffic Modal Split or to improve the reach of destinations like a railway-station.The patters can be generated from zip-code's of user-groups with obvious and daily destinations (school-children, rail-passengers). The next step confronts the theoretical pattern with the layout of streets and the traffic flow, mapping or listing (potential) confrontations between cars and the non-motorised modes, a basis for economical investment in traffic-safety.A design can 'model' the analysed pattern(s) to a economic, direct and safe base (cycle or pedestrian) network. In co-operation, the Dutch the traffic consultant "Verkeersadviesbureau Diepens & Okkema" in Delft, The Netherlands and the Faculty of Architecture, Delft University of Technology, in Delft, The Netherlands, develloped the semi-manual design & decision support system "STAR-Analysis"
series	DDSS
last changed	2003/11/21 15:16

_id	ddssar9638
id	ddssar9638
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	1996
title	A Conceptual Model for Concurrent Engineering in Building Design according to Domain Theory
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Concurrent engineering is a design strategy in which various designers participate in a co-ordinated parallel process. In this process series of functions are simultaneously integrated into a common form. Processes of this type ask for the identification, definition and specification of relatively independent design fields. They also ask for specific design knowledge designers should master in order to participate in these processes. The paper presents a conceptual model of co-ordinated parallel design processes in which architectural space is simultaneously defined in the intersection of three systems: a morphological or level-bound system, a functional or domain-bound system and a procedural or phase-bound system. Design strategies for concurrent engineering are concerned with process design, a design task which is comparable to the design of objects. For successfully accomplishing this task, knowledge is needed of the structural properties of objects and systems; more specifically of the morphological, functional and procedural levels which condition the design fields from which these objects emerge, of the series of generic forms which condition their appearance and of the typological knowledge which conditions their coherence in the overall process.
series	DDSS
last changed	2003/11/21 15:16

_id	d7eb
authors	Bharwani, Seraj
year	1996
title	The MIT Design Studio of the Future: Virtual Design Review Video Program
source	Proceedings of ACM CSCW'96 Conference on Computer-Supported Cooperative Work 1996 p.10
summary	The MIT Design Studio of the Future is an interdisciplinary effort to focus on geographically distributed electronic design and work group collaboration issues. The physical elements of this virtual studio comprise networked computer and videoconferencing connections among electronic design studios at MIT in Civil and Environmental Engineering, Architecture and Planning, Mechanical Engineering, the Lab for Computer Science, and the Rapid Prototyping Lab, with WAN and other electronic connections to industry partners and sponsors to take advantage of non-local expertise and to introduce real design and construction and manufacturing problems into the equation. This prototype collaborative design network is known as StudioNet. The project is looking at aspects of the design process to determine how advanced technologies impact the process. The first experiment within the electronic studio setting was the "virtual design review", wherein jurors for the final design review were located in geographically distributed sites. The video captures the results of that project, as does a paper recently published in the journal Architectural Research Quarterly (Cambridge, UK; Vol. 1, No. 2; Dec. 1995).
series	other
last changed	2002/07/07 16:01

For more results click below: