Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 476

Reformat results as: short short into frame detailed detailed into frame

_id	ddssup9601
id	ddssup9601
authors	Aoke, Yoshitsugu and Muraoka, Naoto
year	1996
title	An optimization method of the facility location by genetic algorithm
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	In planning of community-facilities, it is important to decide the facility location to provide the effective service for residents. The behavior of residents using the facility and the evaluation methods of the location have been studied. But, finding the optimum location is very hard in actual planning because the volume of calculation depends on the number of feasible locating points of facilities. To conquer the difficulty of searching the optimum location, we propose an optimization method using Genetic Algorithm. An alternative of location is expressed by a chromosome. Each chromosome consists of genes, and each gene expresses a located zone of the facility. We gave definitions of genetic procedures; crossing-over, mutation and selection. Alternatives of the facility location are generated by these genetic procedures like as life evolution. For each alternative, the behaviors of users are estimated by a spatial-interaction model, and the facilities that residents in each place choose are determined. The effectiveness of the location is measured by a total sum of distances between the facility and the user. After the confirmation of the effectiveness of our method by applying on ideal example problems, we applied it on the actual problem in Japanese town. By this method we could find the optimum location in about one-third time and effort as compared with the ordinal method.
series	DDSS
last changed	2003/11/21 15:15

_id	af53
authors	Boyer, E. and Mitgang, L.
year	1996
title	Building community: a new future for architecture education and practice
source	Carnegie Foundation for the Advancement of Teaching
summary	Internships, before and after graduation, are the most essential link connecting students to the world of practice. Yet, by all accounts, internship is perhaps the most troubled phase of the continuing education of architects. During this century, as architectural knowledge grew more complex, the apprenticeship system withered away and schools assumed much of the responsibility for preparing architects for practice. However, schools cannot do the whole job. It is widely acknowledged that certain kinds of technical and practical knowledge are best learned in the workplace itself, under the guidance of experienced professionals. All state accrediting boards require a minimum period of internship-usually about three years-before a person is eligible to take the licensing exam. The National Council of Architectural Registration Boards (NCARB) allows students to earn up to two years of work credit prior to acquisition of an accredited degree. The Intern Development Program (IDP), launched by NCARB and the American Institute of Architects in 1979, provides the framework for internship in some forty states. The program was designed to assure that interns receive adequate mentoring, that experiences are well-documented, and that employers and interns allocate enough time to a range of educational and vocational experiences to prepare students for eventual licensure. As the IDP Guidelines state, "The shift from school to office is not a transition from theory to pragmatism. It is a period when theory merges with pragmatism.... It's a time when you: apply your formal education to the daily realities of architectural practice; acquire comprehensive experience in basic practice areas; explore specialized areas of practice; develop professional judgment; continue your formal education in architecture; and refine your career goals." Whatever its accomplishments, however, we found broad consensus that the Intern Development Program has not, by itself, solved the problems of internship. Though we found mutually satisfying internship programs at several of the firms we visited or heard about around the country, at many others interns told us they were not receiving the continuing education and experience they needed. The truth is that architecture has serious, unsolved problems compared with other fields when it comes to supplying on-the-job learning experiences to induct students into the profession on a massive scale. Medicine has teaching hospitals. Beginning teachers work in actual classrooms, supported by school taxes. Law offices are, for the most part, in a better financial position to support young lawyers and pay them living wages. The architecture profession, by contrast, must support a required system of internship prior to licensure in an industry that has neither the financial resources of law or medicine, the stability and public support of teaching, nor a network of locations like hospitals or schools where education and practice can be seamlessly connected. And many employers acknowledged those problems. "The profession has all but undermined the traditional relationship between the profession and the academy," said Neil Frankel, FAIA, executive vice president of Perkins & Will, a multinational firm with offices in New York, Chicago, Washington, and London. "Historically, until the advent of the computer, the profession said, 'Okay, go to school, then we in the profession will teach you what the real world is like.' With the coming of the computer, the profession needed a skill that students had, and has left behind the other responsibilities." One intern told us she had been stuck for months doing relatively menial tasks such as toilet elevations. Another intern at a medium-sized firm told us he had been working sixty to seventy hours per week for a year and a half. "Then my wife had a baby and I 'slacked off' to fifty hours. The partner called me in and I got called on the carpet for not working hard enough." "The whole process of internship is being outmoded by economics," one frustrated intern told us. "There's not the time or the money. There's no conception of people being groomed for careers. The younger staff are chosen for their value as productive workers." "We just don't have the best structure here to use an intern's abilities to their best," said a Mississippi architect. "The people who come out of school are really problems. I lost patience with one intern who was demanding that I switch him to another section so that he could learn what he needed for his IDP. I told him, 'It's not my job to teach you. You are here to produce.'" What steps might help students gain more satisfying work opportunities, both during and after graduation?
series	other
last changed	2003/04/23 15:14

_id	68e3
authors	Fuchs, Wladek and Martinico, Anthony
year	1996
title	THE V.C.NET - A DIGITAL STUDY IN ARCHITECTURE
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 23-29
doi	https://doi.org/10.52842/conf.acadia.1996.023
summary	The "V.C.net" project is an Internet-based educational and communication tool for the architectural community. Its goal is to encourage students from architecture programs across the country and around the world to examine problems and collaborate in the exploration of ideas through the World Wide Web. The central concept of the project involves the creation of a simulated, vital urban environment constructed from various forms of digital data. This "virtual city" will be comprised of projects executed by students of architecture and urban design in the U.S. and abroad. Projects will be proposed for specific sites and will reflect real-world questions as they are minored in the virtual world. The city exists as a heuristic tool and is not intended as a copy of any existing human habitat. The ultimate goal of the project is to create a dynamic platform to study the interrelationship of various forces effecting urban development: architecture, planning, civil engineering, economics, social sciences etc. The project originates at the School of Architecture of the University of Detroit Mercy and is intended to be truly interdisciplinary.
series	ACADIA
type	normal paper
last changed	2022/06/07 07:50

_id	8a8f
authors	Hou, June Hao
year	1996
title	Exploration of Extending the Communication Range in the Virtual Design Process
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 299-305
doi	https://doi.org/10.52842/conf.caadria.1996.299
summary	Computer Support for Collaborative Works (CSCW) and recently investigated Virtual Design Studio (VDS) are reviewed. By involving into two design projects and examining the virtual design process, several technical and procedural problems are notified and discussed. A community reconstruction was proceeded in the second project to help local communities to build their network communication. This paper tries to construct guidelines for future virtual design process and addresses the possibilities of extending the communication range to local communities and users.
series	CAADRIA
last changed	2022/06/07 07:50

_id	39fb
authors	Langton, C.G.
year	1996
title	Artificial Life
source	Boden, M. A. (1996). The Philosophy of Artificial Life, 39-94.New York and Oxford: Oxford University Press
summary	Artificial Life contains a selection of articles from the first three issues of the journal of the same name, chosen so as to give an overview of the field, its connections with other disciplines, and its philosophical foundations. It is aimed at those with a general background in the sciences: some of the articles assume a mathematical background, or basic biology and computer science. I found it an informative and thought-provoking survey of a field around whose edges I have skirted for years. Many of the articles take biology as their starting point. Charles Taylor and David Jefferson provide a brief overview of the uses of artificial life as a tool in biology. Others look at more specific topics: Kristian Lindgren and Mats G. Nordahl use the iterated Prisoner's Dilemma to model cooperation and community structure in artificial ecosystems; Peter Schuster writes about molecular evolution in simplified test tube systems and its spin-off, evolutionary biotechnology; Przemyslaw Prusinkiewicz presents some examples of visual modelling of morphogenesis, illustrated with colour photographs; and Michael G. Dyer surveys different kinds of cooperative animal behaviour and some of the problems synthesising neural networks which exhibit similar behaviours. Other articles highlight the connections of artificial life with artificial intelligence. A review article by Luc Steels covers the relationship between the two fields, while another by Pattie Maes covers work on adaptive autonomous agents. Thomas S. Ray takes a synthetic approach to artificial life, with the goal of instantiating life rather than simulating it; he manages an awkward compromise between respecting the "physics and chemistry" of the digital medium and transplanting features of biological life. Kunihiko Kaneko looks to the mathematics of chaos theory to help understand the origins of complexity in evolution. In "Beyond Digital Naturalism", Walter Fontana, Guenter Wagner and Leo Buss argue that the test of artificial life is to solve conceptual problems of biology and that "there exists a logical deep structure of which carbon chemistry-based life is a manifestation"; they use lambda calculus to try and build a theory of organisation.
series	other
last changed	2003/04/23 15:14

_id	c7e9
authors	Maver, T.W.
year	2002
title	Predicting the Past, Remembering the Future
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary	Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ga9927
id	ga9927
authors	Neagu, Mariana
year	1999
title	On Linguistic Aspects from a Cross-cultural Perspective
source	International Conference on Generative Art
summary	The goal of this paper is to discuss the issue of culture and its relationship to language and cognition by dealing with a number of lexical concepts, grammatical concepts and cultural scripts. Taking a moderate view, I reconcile universalism and ethnocentrism and argue that the study of culture-specific aspects of language has both a theoretical and practical importance. The role of universal semantic primes is obvious in culture-specific words such as the Japanese amae (a peculiarly Japanese emotion) which, though unique and untranslatable, can be accurately and intelligibly defined in terms of semantic primes (Wierzbicka, 1996). The view that meanings cannot be fully transferred from one language to another is supported by the difference in meaning manifested in the different range of use of the word happy (a common, everyday word in modern English) and joyful (a more literally and stylistically marked term.). A cross-linguistic analysis of the concept ‘happy’in English, Romanian, German, French, Italian, points to the so-called ‘traditional Anglo-Saxon distate for extreme emotions’. As far as aspects of grammar connected with culture are concerned, I compare expressive grammatical devices like intensifiers in English, Romanian and Italian. The question the paper addresses is whether constructions like syntactic reduplication(e.g. bella bella) and the absolute superlative (e.g. bellissimo) are indeed linked with what has been called ‘the theatrical quality’ of Italian life (Barzini, 1964) or not. Relative to Romanian, I assume that the idea of intensity of a state or action is conveyed, in certain registers, by terms and expressions pertaining to basic element source domains such as fire (e.g. frumoasa foc ‘fire-beautiful’) and earth (e.g. frumusetea pamantului ‘beauty of the earth’) and also by syntactic reduplication (e.g. frumoasa-frumoaselor ’beauty of the beauties’). Finally, I approach aspects of pragmatics which are culturally determined in the sense that they express cultural norms, values, ideals, attitudes. For instance, preferences are expressed directly in English while in Japanese this manner is contrary to the ideal of enryo ’restraint, reserve’.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	a295
authors	Penttilä, Hannu
year	1996
title	The Meaning of CAAD in Architectural Education
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 347-354
doi	https://doi.org/10.52842/conf.ecaade.1996.347
summary	A brief historical analysis followed by some possible future scenarios The influence of CAD – nowadays more correctly stated with CAAD meaning architectural CAD – has been more and more evident in the university level architectural education. The development process of architectural CAD-courses and wider CAD-curriculums could, at least in Scandinavian countries, be described and simplified with a couple of development steps analyzed here, to give the starting point. And since the process of educational evolution will naturally keep on developing in the future also, some possible future paths concerning both CAD-equipment, CAAD-education and more traditional architectural curriculumns, are described here after the historical analysis. Following commonly used futures studies methods, my intent is not to predict the future, but to give several probable future choices, of which some might come true, and some might not. Some of the paths are evident, some are ideal and some may cause also negative effects. The future of architectural education and CAAD as part of it will certainly appear somehow, very possibly somewhere in the middle of these presented paths. The aim of this presentation is to give the architectural education community – the schools and faculty – a wide perspective view to analyze and plan their local course structures also for the future. The future possibilities are presented here, so that the schools can prepare for the forecoming future changes in their workin environment. Finally, the future will appear the way we will create it.
series	eCAADe
email
more	http://www.tut.fi/~penttila/index.html
last changed	2022/06/07 08:00

_id	ddssar9625
id	ddssar9625
authors	Sanui, Junichiro
year	1996
title	Visualization of users' requirements: Introduction of the Evaluation Grid Method
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	During the last decade, a new type of approaches have emerged in Japanese environmental psychology. These approaches have characteristics that they are aiming to clarify users' requirements for the environment as the design questions to be solved, compared with the traditional approaches aiming to clarify the environment-human relationship to provide actual design solutions. As an example of these new approaches, the Evaluation Grid Method (EGM), a semi-structured interview method developed by the author based on Kelly's Personal Construct Theory is introduced. In the EGM, by asking the reasons of why an environment is more preferable to others recurrently, together with leading questions (laddering), each participant's requirements to the environment are elicited structurally as well as phenomenologically. Also by cumulating each participant's requirements, the extensive structure of the requirements to the environment embraced by people is produced. In this paper, a detailed procedure and the outcome of the EGM are presented on the elicitation of workers' requirements for the office environment. Also recent applied examples where the EGM research was applied as an design aid in architectural as well as industrial field will be introduced.
series	DDSS
last changed	2003/08/07 16:36

_id	ef7b
authors	Vagts, Karen A.
year	1996
title	Managing AutoCAD in the Design Firm: A Manual for Architects and Interior Designers
source	Addison-Wesley
summary	Effective management--not technical wizardry--is the key to maximizing the benefits of AutoCADr. In Managing AutoCAD in the Design Firm, Karen Vagts, a trained interior designer with a graduate degree in management, guides you through a careful examination of the issues involved in implementing AutoCAD effectively in your practice. Managing AutoCAD in the Design Firm focuses on the relationship between CAD and the very specific standards and procedures that architects, interior designers, project managers, and other members of the architecture/design community apply in their normal practice.
series	other
last changed	2003/02/26 18:58

_id	sigradi2003_030
id	sigradi2003_030
authors	Valderrama, Ana
year	2003
title	Matéricosweb (Matericosweb)
source	SIGraDi 2003 - [Proceedings of the 7th Iberoamerican Congress of Digital Graphics] Rosario Argentina 5-7 november 2003
summary	In 1996, the Taller Galli precariously initiated the diffusion and communication of it academic production and researches as well as the artistic and creative thoughts in relationship to other subjects, placing us on a wider space for the cultural, urbanistic and architectural debate towards the community in general. That was how we decided to start this independent and self-managed editorial project. The Matéricos Periféricos web site (www.matericosweb.com) emerged when the produced material had overdone the diffusion and debate frequency and expectation of the paper magazine. We construct a complementary space to the paper magazine that can spread faster, interactively and widely everything that is published on the paper magazine and other subjects that could not be published for monetary reasons or simply due to real time. Nowadays, Matéricos Periféricos is a net that is trying to install a debate on the contemporary Latin-American culture.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	e4a8
authors	Winograd, Terry ed. (et al.)
year	1996
title	Bringing Design to Software
source	New York, NY:ACM Press and Reading, MA:Addison-Welsley
summary	In this landmark book, Terry Winograd shows how to improve the practice of software design, by applying lessons from other areas of design to the creation of software. The goal is to create software that works---really works---in being appropriate and effective for people who live in the world that the software creates. The book contains essays contributed by prominent software and design professionals, interviews with experts, and profiles of successful projects and products. These elements are woven together to illuminate what design is, to identify the common core of practices in every design field, and to show how software builders can apply these common practices to produce software that is more effective, more appropriate, and more satisfying for users. The initial chapters view software from the user's perspective, featuring the insights of a experienced software designers and developers, including Mitch Kapor, David Liddle, John Rheinfrank, Peter Denning, and John Seely Brown. Subsequent chapters turn to the designer and the design process, with contributions from designers and design experts, including David Kelley, Donald Schön, and Donald Norman. Profiles discussing Mosaic, Quicken, Macintosh Interface Guidelines, Microsoft Bob, and other successful applications and projects are included to highlight key points in the chapters. This book is for the broad community of people who conceive, develop, market, evaluate, and use software. It is foremost, of course, for the software designer, and particularly for the reflective designer---someone who is driven by practical concerns, but who is also able to step back for a moment and reflect on what works, what doesn't work, and why. At the same time, it reveals new directions and new possibilities for programmers who build software, and for product managers who bring software to market. Software users will also find the book valuable in expanding their understanding of what good software design encompasses, which will help them in evaluating, integrating, and productively using computer applications.
series	other
last changed	2003/04/23 15:14

_id	a9ca
authors	Abadi Abbo, Isaac
year	1996
title	EFFECTIVENESS OF MODELS
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Architects use many types of models to simulate space either in their design process or as final specifications for building them. These models have been proved useful or effective for specific purposes. This paper evaluates architectural models in terms of five effectiveness components: time of development, cost, complexity, variables simulated and ecological validity. This series of models, used regularly in architecture, are analysed to finally produce a matrix that shows the effectiveness of the different models for specific purposes in architectural design, research and education. Special emphasis is given to three specific models: 1/10 scale, full-scale and computer generated.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa/
last changed	2016/02/17 13:47

_id	ascaad2004_paper11
id	ascaad2004_paper11
authors	Abdelfattah, Hesham Khairy and Ali A. Raouf
year	2004
title	No More Fear or Doubt: Electronic Architecture in Architectural Education
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combined with technologies to communicate images, data, and “live” action, now enable virtual dimensions of studio experience. Students no longer need to gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up—if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to support collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The challenge is to predict whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	2dbc
authors	Achten, Henri
year	1996
title	Teaching Advanced Architectural Issues Through Principles of CAAD
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 7-16
doi	https://doi.org/10.52842/conf.ecaade.1996.007
summary	The paper discusses the differences between teaching CAAD by using standard software ("off-the-shelf"-software) and teaching the principles of CAAD ("principles-teaching"). The paper distinguishes four kinds of application for design systems in education: social systems, professional systems, educational systems, and innovative systems. The paper furthermore proposes to distinguish between computational issues and architectural issues relative to design systems. It appears that there is not a principled distinction between software-teaching and principles-teaching when it comes to computational issues of design systems. However, when the architectural content of CAAD systems is concerned, then principles of CAAD systems seem to be more appropriate for teaching. The paper presents work on generic representations as a specific case. Generic representations can be used to teach one particular kind of architectural content of design systems. The paper ends with conclusions.
series	eCAADe
email
more	http://www.ds.arch.tue.nl/
last changed	2022/06/07 07:54

_id	846c
authors	Achten, Henri
year	1996
title	Generic Representations: Intermediate Structures in Computer Aided Architectural Composition.
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 9-24
summary	The paper discusses research work on typological and generic knowledge in architectural design. Architectural composition occurs predominantly through drawings as a medium. Throughout the process, architects apply knowledge. The paper discusses the question how to accommodate this process in computers bearing in mind the medium of drawings and the application of knowledge. It introduces generic representations as one particular approach and discusses its implications by the concept of intermediate structures. The paper concludes with an evaluation of the presented ideas.
keywords
series	other
email
last changed	1999/04/08 17:16

_id	765f
authors	Adam, Holger
year	2002
title	Reinterpretation or replacement? The effects of the information and communication technologies on urban space
source	CORP 2002, Vienna, pp. 345-349
summary	The timid question “Virtual spaces or real places?” forms the core of many debates within the spatial sciences addressing theconsequences of the rapid development of information and communication technologies1 on existing spatial structures. So far several opinions rival each other for the interpretation of current and the prediction of future spatial developments. The spacelessness ofcomputer networks and the possibility to transmit data in real-time have lead visionaries to predict a far-reaching devaluation of timeand space, so questioning the future importance of traditional spatial structures: The “annihilation of distance and time constraints [incomputer networks] could undermine the very rationale for the existence of the city by dissolving the need for physical proximity”(Graham and Marvin 1996: 318). The disappearance of the city into the net, therefore, seems to become a distinct possibility.
series	other
email
more	www.corp.at
last changed	2003/11/21 15:15

_id	4b55
authors	Af Klercker, J. , Ekholm, A. and Fridqvist, S. (Ed.)
year	1996
title	Education for Practice [Conference Proceedings]
source	14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2 / Lund (Sweden) 12-14 September 1996, 425 p.
doi	https://doi.org/10.52842/conf.ecaade.1996
summary	There are many of us trying to make place for CAAD in a natural way in the Curriculum of the Architect school. We would like to make CAAD useful to the students already during their studies. Even if we have the support of our collegues for running courses there is very often no space in the timetable. And even if we have all the entusiasm of our students it is hard to practice your CAAD knowledge on projects where it is not asked for. The education of architects in the use of computers has lead me to try to find "the roots of education of architects" in general. A collegue of mine in a bookshelf of course litterature in Informatics found and put into my hands "Educating the reflective practitioner" by Donald Schön. It lead to an interesting process of personal reflection and discussion within our CAAD team. We think by the way that the theme of the conference points to the heart of the message in Donald Schöns book and we are inviting him as a key note speaker at the Conference.
series	eCAADe
type	normal paper
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:49

_id	63e6
authors	Af Klercker, Jonas
year	1996
title	Visualisation for Clients - One Example of Educating CAAD for Practice
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 17-24
doi	https://doi.org/10.52842/conf.ecaade.1996.017
summary	During the spring term 1996, 13 students of the 3rd and 4th year at the School of Architecture at Lund University had the opportunity to make a one semester CAAD project. 11 students chose the individual exercise to use computer media for developing a small architectural design in interaction with a client. The focus was set more on visualization and the process of communicating ideas, feelings and practical solutions between architect and client and visa versa rather than concentrated on the final product. This paper describes the process of the project and the reflections of the participants. It will discuss problems from the teachers point of view.
series	eCAADe
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:54

For more results click below: