Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 379

Reformat results as: short short into frame detailed detailed into frame

_id	a06c
authors	Batie, David L.
year	1996
title	The Incorporation of Construction History into Architectural History: The HISTCON Interactive Computer Program
doi	https://doi.org/10.52842/conf.acadia.1996.235
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 235-243
summary	Current teaching methods for architectural history seldom embrace building technology as an essential component of study. Accepting the premise that architectural history is a fundamental component to the overall architectural learning environment, it is argued that the study of construction history will further enhance student knowledge. This hypothesis created an opportunity to investigate how the study of construction history could be incorporated to strengthen present teaching methods. Strategies for teaching architectural history were analyzed with the determination that an incorporation of educational instructional design applications using object-oriented programming and hypermedia provided the optimal solution. This evaluation led to the development of the HISTCON interactive, multimedia educational computer program. Used initially to teach 19th Century iron and steel construction history, the composition of the program provides the mechanism to test the significance of construction history in the study of architectural history. Future development of the program will provide a method to illustrate construction history throughout the history of architecture. The study of architectural history, using a construction oriented methodology, is shown to be positively correlated to increased understanding of architectural components relevant to architectural history and building construction.
series	ACADIA
last changed	2022/06/07 07:54

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	ec0e
authors	Engeli, M. and Kurmann, D.
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	H.J.P. Timmermans (ed.), Design and Decision Support Systems in Architecture and Urban Planning Conference, Vol. 1: Architecture Proceedings, pp. 132-142
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to experience rooms and 3D input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 3D model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	other
last changed	2003/04/23 15:50

_id	ddssar9609
id	ddssar9609
authors	Engeli, Maia and Kurmann, David
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to expe-rience rooms and 31) input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 31) model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	DDSS
last changed	2003/08/07 16:36

_id	diss_fox
id	diss_fox
authors	Fox, M.A.
year	1996
title	Novel Affordances of Computation to the Design Process of Kinetic Structures
source	Massachusetts Institute of Technology, Cambridge, MA
summary	This paper is a discourse into the relationship between the process, computational tools and the role which symbolic structure can play in both. I argue the relationship of the process and tools is dialectic, whereby the tools we utilize in design develop new heuristics, the methodologies in turn, if reflectively understood, can be more aptly facilitated through the development of novel tools. The tools and the process then evolve together. A theory is laid out exploring the human visual information processing systems pertinence to the limitations in mental three-dimensional imaging and transformation operations as relevant to the operations of drawing and mental visualization within the architectural design processes, substantiating the designers necessity to draw (by traditional means, but more importantly here, through the inclusive integration of CAD within the process). The necessity to draw is explored as a representational process to the visual system as predicated upon the existence of a structured internal library of diagram-like representations in our heads. I argue that the ways we utilize such idiosyncratic libraries is predicated upon the ways in which we go about structuring the perceived experienced world around us into symbol systems. And finally, the ways we utilize our reflective understanding of the heuristic transformations of these symbols within the design process in the context of a CAD environment are explored as a means to an enhanced understanding of that which is being designed and consequently as a vehicle for the development of future CAD systems to better facilitate such methodologies of designing. A personal design process of several kinetic structures is carried out in order to arrive at a localized process analysis within computer-aided design environment. Through an interactive, reflective process analysis, conclusions are drawn as to the affordances and limitations of such tools as suggestive of the operations a CAD environment might perform so as to better foster future methodologies of designing. The design experiments are utilized as a vehicle to understand the process. Specifically three kinetic projects are exploited for the prototypical operations they display. When difficulties or mental limitations are encountered with the operations, specific tools are developed to facilitate the limitation or to overcome the problem.
series	thesis:MSc
more	http://www.mafox.net/sm_thesis/Thesis11.pdf
last changed	2003/11/28 07:35

_id	08af
authors	Gross, M.D. and Do, E.
year	1996
title	Ambiguous Intentions: a Paper-like Interface for Creative Design
source	Proceedings UIST ’96 Seattle Washington, pp. 183-192
summary	Interfaces for conceptual and creative design should recognize and interpret drawings. They should also capture users' intended ambiguity, vagueness, and imprecision and convey these qualities visually and through interactive behavior. Freehand drawing can provide this information and it is a natural input mode for design. We describe a pen-based interface that acquires information about ambiguity and precision from freehand input, represents it internally, and echoes it to users visually and through constraint based edit behavior.
series	other
email
last changed	2003/04/23 15:50

_id	bd19
authors	Harrison, Steve and Dourish, Paul
year	1996
title	Re-Place-ing Space: The Roles of Place and Space in Collaborative Systems Learning from Space and Place
source	Proceedings of ACM CSCW'96 Conferenc on Computer-Supported Cooperative Work 1996 p.10
summary	Many collaborative and communicative environments use notions of "space" and spatial organisation to facilitate and structure interaction. We argue that a focus on spatial models is misplaced. Drawing on understandings from architecture and urban design, as well as from our own research findings, we highlight the critical distinction between "space" and "place". While designers use spatial models to support interaction, we show how it is actually a notion of "place" which frames interactive behaviour. This leads us to re-evaluate spatial systems, and discuss how "place", rather than "space", can support CSCW design.
keywords	Space; Place; Media Space; Virtual Reality; MUDs; Metaphor
series	other
last changed	2002/07/07 16:01

_id	c8c8
authors	Hendricx, A., Neuckermans, H., Vandevyvere, H. and Nuyts, K.
year	1996
title	CAAD in Pedagogical Practice
doi	https://doi.org/10.52842/conf.ecaade.1996.199
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 199-210
summary	The course on CAAD at the KU Leuven is part of the course on design methodology and theory from which it is the most recent and natural extension. Attached to this course a series of assignments has been developed which bring the students in 45 hours to a non-trivial level of acquaintance with CAAD. Our assignments are primarily directed towards practice. They are built on top of AutoCAD to which we have added in-house developments in order to focus on specific pedagogical goals within a very limited time. After a general introduction on Windows (file management) and AutoCAD (basics) students make the following assignments (main pedagogical goals in between brackets). colophon (working with blocks), detail (2D-drawing, hatching, editing), facade design using a built-in system of proportion (slides, scriptfile), extraction (linking alphanumerical and graphical entities), container (level of detail, icon menus, viewports), surface modelling (modelling 3D-objects with surfaces), fractal tree (recursion in Autolisp), solid modelling (Leicester engineering building), lighting (integration of drawing and computation of illumination levels), pressure lines in an arc (interactive design of an arc), demos. The paper presents and comments these assignments and shows results from the last 2 years.
series	eCAADe
email
last changed	2022/06/07 07:49

_id	479b
authors	Kirkby, S. D., Flint, R. Jacobs, S.R., Saunderson, C. and Bamford, E.
year	1996
title	Interactive Urban Planning: The Adelaide Model Case Study
source	AURISA '96: Australasian Urban and Regional Information Systems Association, Hobart, Australia, 25-29 November, Australasian Urban and Regional Information Systems Association, pp. 235-240
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:38

_id	3cd6
authors	Kirkby, S. D., Pollitt, S.E.P., Eklund, P.W., Coulson, T. and Ratcliffe, S.
year	1996
title	An Interactive 3D GIS Urban Planning Model
source	28th International Geographical Congress, The Hague, 4-10 August, pp. 4-10
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:38

_id	647a
authors	Kirschner, Ursula
year	1996
title	Teaching Experimental Design with CAAD
doi	https://doi.org/10.52842/conf.ecaade.1996.221
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 221-226
summary	2-D CAAD is the standard tool in architectural work and education. whereas 3-dimensional CAAD is still used to present a finished design. This paper demonstrates that experimental design in 3-D allows students to deal with new methods of design. At North East Lower Saxony Polytechnic, 1995 saw the beginning of development of didactic methods for teaching design with the interactive use of common 3-D CAAD tools. Six exercises were devised, the first two being 2-D exercises in urban and layout design. Subsequent steps introduced three styles of architectural designing with 3-D tools. The students selected one of these styles for their three-day exercise in urban planning. Based on the results, three main ways were developed: the "digital toolkit", the "additive design approach" and the "lighting simulation".
series	eCAADe
last changed	2022/06/07 07:52

_id	8ee5
authors	Koutamanis, A., Mitossi, V.
year	1996
title	SIMULATION FOR ANALYSIS: REQUIREMENTS FROM ARCHITECTURAL DESIGN
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Computerization has been a positive factor in the evolution of both kinds of analysis with respect to cost, availability and efficiency. Knowledge-based systems offer an appropriate implementation environment for normative analysis which can be more reliable and economical than evaluation by human experts. Perhaps more significant is the potential of interactive computer simulation where designs can be examined intuitively in full detail and at the same time by quantitative models. The advantages of this coupling are evident in the achievements of scientific visualization. Another advantage of computational systems is that the analysis can be linked to the design representation, thereby adding feedback to the conventional visualization of designs in drawing and modeling systems. Such connections are essential for the development of design guidance systems capable of reflecting consequences of partial inadequacies or changes to other aspects in a transparent and meaningful network of design constraints. The possibilities of computer simulation also extend to issues inadequately covered by normative analysis and in particular to dynamic aspects of design such as human movement and circulation. The paper reports on a framework for addressing two related problems, (a) the simulation of fire escape from buildings and (b) the simulation of human movement on stairs. In both cases we propose that current evaluation techniques and the underlying design norms are too abstract to offer a measure of design success, as testified by the number of fatal accidents in fires and on stairs. In addition, fire escape and stair climbing are characterized by great variability with respect to both the form of the possible designs and the profiles of potential users. This suggests that testing prototypical forms by typical users and publishing the results as new, improved norms is not a realistic proposition for ensuring a global solution. Instead, we should test every design individually, within its own context. The development of an affordable, readily available system for the analysis and evaluation of aspects such as fire escape and stair safety can be based on the combination of the technologies of virtual reality and motion capture. Testing of a design by a number of test people in an immersion space provides not only intuitive evaluations by actual users but also quantitative data on the cognitive and proprioceptive behaviour of the test people. These data can be compiled into profiles of virtual humans for further testing of the same or related designs.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:40

_id	7c47
authors	Lee, Tsai-Sun and Hardin, Mary
year	1996
title	Daylight Visual Effects: An Interactive Multimedia Courseware Prototype for Beginning Design Students
source	Computer Graphics. August 1996
summary	An interactive multimedia courseware prototype, Daylight Visual Effects (DVE), has been designed to provide a demonstration database and easy-to-use interface for beginning design students. Users gain or enhance knowledge about the visual effects of daylighting by reviewing relevant daylighting images, written information, animations and 3D computer models in the DVE's database. The presentation includes a live demonstration of the DVE prototype, a summary of the accomplishments and limitations of the courseware development, the effectiveness of the DVE interface, and the impact of DVE courseware on students and instructors.
series	journal paper
last changed	2003/04/23 15:14

_id	8832
authors	MacCallum, C. and Hanna, R.
year	1996
title	DEFLECT: A Computer Aided Learning Package For Teaching Structural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.253
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 253-262
summary	The teaching of structures and its integration with design teaching has been seen as one of the major problems in design education in schools of architecture world-wide. A number of suggestions have been put forward to improve the quality of teaching in structures in architecture. These include the production of computer based learning materials, and the use of the computer as a ‘substitute’ tutor. This paper reports on a SHEFC funded project jointly carried out by the Department of Civil Engineering, University of Paisley, the Mackintosh School of Architecture, and Lamp Software. The project aims to build a computer-assisted learning package on the response of structures to load. The software will be used as an interactive teaching tool for both architectural and engineering students. The package has three levels: Beginners (Level 1), Intermediate (Level 2) and Advanced (Level 3). The first two levels have been completed after continuous feedback from both institutions. Level 1 is geared towards architectural and engineering students to help them understand structural behaviour of building components, such as deflection. Level 2 is a graphical editor that enables students to draw precisely the structure of their designs, investigate the deflection of structural members and identify areas of tension and compression. Level 3 is a design tool aimed at architectural and civil engineering students where they can design and analyse realistic structures by choosing structural members from a library, and specify materials and multiple loads. Prior to its final release, the software package was appraised by students from both institutions. Analysis of results from questionnaires revealed that students expressed a great deal of 'satisfaction' with many of its teaching and learning attributes. The outcome of this project will promote and enhance students’ understanding of the response of structures to load; it will also help students grasp the impact of varying building materials and cross sectional properties on the structural form.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	57c7
authors	Mathew, Paul
year	1996
title	Integrated Energy Modeling for Computational Building Design Assistance
source	Carnegie Mellon University, Department of Architecture
summary	Insights into the importance of energy modeling in building design have not yet resulted in the sufficient and systematic use of modeling tools in practice. In recent years, there has been considerable discussion on the limitations of simulation tools, and there is a noteworthy consensus as to the nature of the contributing factors (material and time implications, problematic user-interfaces, inefficient data communication structures, poor integration with CAD systems, absence of 'active' design support). This thesis deals with three research questions that are especially pertinent to the quest for active, multi-aspect design and simulation environments: (1) The appropriateness and feasibility of a methodologically consistent performance modeling approach through the entire design process. (2) Strategies for a structurally 'seamless' containment of performance simulation within a computational design environment. (3) Technologies to facilitate dynamic and interactive performance-to-design mapping. At a paradigmatic level, this thesis critically examines the existing responses to each of these questions, and proposes alternative computational frameworks and technologies to overcome some of the system-immanent ('endogenous') limitations of the existing approaches. At an operational level, this thesis demonstrates the proposed solutions by implementing an active thermal simulation module (NOD
series	thesis:PhD
email
last changed	2003/04/15 02:37

_id	maver_086
id	maver_086
authors	Maver, T.W.
year	1996
title	A Tale of Three Cities
source	VR News. Proceedings of Virtual Heritage Conference 1995 (Bath [UK], Nov 22)
summary	The ABACUS Group has been active for some years in the use of computer graphics and multimedia to represent past, present and future buildings in both urban and rural settings. The three cities discussed during the presentation are Split, in former Yugoslavia - a graphical account of the development of Split from its origin in the Diocletian Palace of the Venetian Empire up to the present day; Edinburgh - a multimedia interface to a large-scale three dimensional computer model of Edinburgh Old Town; and Glasgow - Virtual City developments in the run up to the City of Architecture and Design celebrations in 1999. The presentation concludes with a report on the IMAGEA project - an international initiative to construct an Interactive Multimedia Archive of Great European Architecture.
series	other
type	normal paper
email
last changed	2006/09/11 07:29

_id	b490
authors	Mine, Mark
year	1996
title	Working in a Virtual World: Interaction Techniques Used in the Chapel Hill Immersive Modeling Program
source	Research report TR96-029, Department of Computer Science, University of North Carolina, Chapel Hill
summary	This paper presents a description of the interaction techniques used in the Chapel Hill Immersive Modeling Program (CHIMP). CHIMP is intended for the preliminary stages of architectural design. It is an immersive system; users work directly within a virtual world. The main goal has been to develop interaction techniques that exploit the benefits of working immersed while compensating for its limitations. Interaction techniques described and discussed in this paper include: . Action at a distance . Look-at menus . Remote controls (hand-held widgets) . Constrained object manipulation using twohands . Two-handed control panel interaction . Worlds in miniature . Interactive numbers Keywords: Virtual reality, Virtual environments, Computeraided modeling, Geometric modeling, User interface design, Two-handed interaction, Two-handed interfaces, Interactive computer graphics. 1. Introduction 1.1. CHIMP Overview The UNC-Chapel Hill Immersive Modeling Program (or CHIMP for short) is a virtu...
series	report
last changed	2003/04/23 15:14

_id	a026
authors	Nagakura, Takehiko
year	1996
title	Form Processing: A System for Architectural Design
source	Harvard University
summary	This thesis introduces a new approach to developing software for formal synthesis in architectural design. It presents theoretical foundations, describes prototype specifications for computable implementation, and illustrates some examples. The approach derives from the observation that architects explore ideas through the use of sequences of drawings. Architects derive each drawing in a sequence from its predecessor by executing some transformation on a portion of the drawing. Thus, a formal design state is established by a sequence of drawings with historical information about their construction through progressive transformations. The proposed system allows an architect to develop a design in three ways. First, a new transformation can be added to a current sequence of drawings. Second, existing sequences can be edited by exchanging their subset sequences. Third, an existing sequence can be revised parametrically by assigning new values to its design variables. The system implements scripts that specify categories of shapes and transformations between any two shape categories. When an instance of a shape category is found in a design, a transformation can replace it with an instance of another shape category. Recursive application of a given set of transformations to an initial shape instance produces a sequence of drawings that represents a formal design state. The system encodes this formal design state as an assembly of all the shape instances used and their relationships (nesting, emergent and replacement). Furthermore, this assembly, called a construction graph, allows the existing sequences to be edited efficiently by exchanging subsets and to be revised parametrically. The advantage of this approach as demonstrated in the examples is that it allows intuitive, rapid and interactive construction of complex designs. Moreover, design knowledge can be captured by scripts that depict heuristic shapes and transformations as well as by assembled construction graphs which depict cases of formal design. Such a reusable and expandable knowledge base is essential for assisting disciplined and creative architectural design.
keywords	Computer Software Development; Architectural Design; Data Processing
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	cd74
authors	Rezgui, Y., Brown, A., Cooper, G., Yip, J., Brandon, P. and Kirkham, J.
year	1996
title	An information management model for concurrent construction engineering
source	Automation in Construction 5 (4) (1996) pp. 343-355
summary	Projects in the construction industry are increasingly characterised by large numbers of actors working concurrently at different locations and using heterogeneous technologies. In order to support this kind of collaborative engineering, project information needs to be conceptually modelled throughout its lifecycle, along with the events that impact upon it by causing state changes. There exists, therefore, an urgent need to provide a flexible framework in which the highly interleaved and interactive events and transactions inherent in complex construction projects can be managed effectively. This paper addresses these issues by proposing such a conceptual framework consisting of four levels of abstraction and functionality governed by the COMMIT (Construction Modelling and Methodologies for Intelligent inTegration of information) Information Management Model (CIMM). A comprehensive presentation of the CIMM (which tackles issues such as versioning, notification, object rights and ownership) is given. The CIMM also facilitates the recording of the intent behind construction project decisions, thereby providing a complete project history. Finally, the model is illustrated through two proposed scenarios dealing with selected objects' lifecycles during design stages and actor transaction management.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

For more results click below: