CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 490

_id ddssup9604
id ddssup9604
authors Boelen, A.J.
year 1996
title Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series DDSS
email
last changed 2003/11/21 15:16

_id 02ac
authors Wang, Donggen
year 1998
title Conjoint Approaches to Developing Activity-Based Models
source Eindhoven University of Technology, Faculty of Architecture and Urban Planning, The Netherlands
summary Since the late 1950s, transportation models have played an important role in forecasting travel demand and evaluating the impacts of plans and policies. Planners use transportation models to learn about the behavior of transport systems. Over the past decades, the development of particular modeling approaches has closely followed planning needs, which in turn are closely related to dominant policy issues. The first generation of transportation models was developed during the late 1950s and early 1960s. Their purpose was to facilitate the prediction of future travel demand, such that road capacity programs could be based on predicted demand. The first generation models are commonly referred to as four-step models. These models are typically formulated and calibrated at the level of the traffic zones. Individuals are aggregated by traffic zone. Traffic is considered to be the result of four sequential decisions: trip generation, trip distribution, modal split and traffic assignment. These decisions are modeled separately at successive stages. Although the four-step models have been widely used, even institutionalized in literally thousands of applications (Stopher, et al., 1996), the major shortcoming of these large-scale, aggregate and supply-oriented models is their lack of behavioral content.
keywords Traffic Behaviour; Traffic and Transportation Research
series thesis:PhD
last changed 2003/02/12 22:37

_id 88a2
authors Zhang, Lei
year 1996
title The Design of a Test Program for Basic Design
source CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 253-267
doi https://doi.org/10.52842/conf.caadria.1996.253
summary Within the whole range of methods available in the teaching of design with computer the "Exercise" made, seems to be one of the most productive. Not only the student but also the teacher is involved in a step by step process of search, discovery and development. The continuous and controlled building of complexity in architecture design are the underlying issues. The student models in desecrate steps, exploring, testing, discovering and thus build a "repertoire" which combines knowledge skills, experience, attitudes as well as methodology. Symbiotically related the teacher prepares the exercise, one might call the process applied design research. Since based upon research, the teacher structures the learning process defining the what and why by indirect means. Leaving the how to the student's initiative and inventiveness. The design of the design or the design of the learning process poses one of the real challenges to the teacher. In the case of chains of exercise the interactiveness of the student and teacher are of specific interest, since feedback loops add to the process. The following test program is directly related to this line of thinking. In it a "teacher" is asked to develop a simple chain of exercises based on a given "theoretical model". Thus building his own experience in basic design. In this test run the student is introduced to the concept of continuous space as well as the notion of architecture form as the interaction between space, site and structure a course. It could be seen as a basic model since we could have much more complex resolutions if we change the given elements and limitations.
series CAADRIA
last changed 2022/06/07 07:57

_id ddssar9626
id ddssar9626
authors Sariyildiz, Sevil and Schwenck, Mathias
year 1996
title Integrated Support Systems for Architectural Design
source Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary Many software systems are used in the field of architectural design. On the other hand, we can state that there is a significant lack of integrated systems providing a general support for the designer during the whole design process from initiative till demolition. This research project deals with the development of such an integrated design support system. We consider a complete automation of architectural design as an unlikely proposition and undesirable for the architect. Therefore, the general objective is to give support to the architect to improve the quality and to increase the efficiency of the design process. So far there are different tools providing such functionality. Nevertheless, there are no appropriate tools for many of the sub-processes. Furthermore, the current state of available design software is characterised by a lack of integration of different tools. To overcome these two problems our research project involves the development of tools as well as it deals with the aspect of tool integration. We will give a general description of the support that software can offer to architects during the materialisation phase of design. We conclude that many different tools are needed which have to be integrated in an open, modular, distributed, user friendly and efficient environment.
series DDSS
last changed 2003/08/07 16:36

_id ddssar9601
id ddssar9601
authors Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year 1996
title Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series DDSS
last changed 2003/11/21 15:15

_id 8ded
authors Anders, Peter
year 1996
title Envisioning Cyberspace: The Design of On-Line Communities
source Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 55-67
doi https://doi.org/10.52842/conf.acadia.1996.055
summary The development of the World Wide Web into an active, visual social environment poses unique opportunities for the design professions. Multi-user Domains, social meeting places in cyberspace, are mostly text-based virtual realities which use spatial references to set the stage for social interaction. Over the past year design students at the New Jersey Institute of Technology School of Architecture have investigated several text-based domains. In the course of their work, they envisioned and graphically portrayed these environments as immersive virtual realities through the use of computer animation. Their studies addressed issues ranging from the nature of symbolic motion to social/political structures of these domains.
series ACADIA
email
last changed 2022/06/07 07:54

_id d7eb
authors Bharwani, Seraj
year 1996
title The MIT Design Studio of the Future: Virtual Design Review Video Program
source Proceedings of ACM CSCW'96 Conference on Computer-Supported Cooperative Work 1996 p.10
summary The MIT Design Studio of the Future is an interdisciplinary effort to focus on geographically distributed electronic design and work group collaboration issues. The physical elements of this virtual studio comprise networked computer and videoconferencing connections among electronic design studios at MIT in Civil and Environmental Engineering, Architecture and Planning, Mechanical Engineering, the Lab for Computer Science, and the Rapid Prototyping Lab, with WAN and other electronic connections to industry partners and sponsors to take advantage of non-local expertise and to introduce real design and construction and manufacturing problems into the equation. This prototype collaborative design network is known as StudioNet. The project is looking at aspects of the design process to determine how advanced technologies impact the process. The first experiment within the electronic studio setting was the "virtual design review", wherein jurors for the final design review were located in geographically distributed sites. The video captures the results of that project, as does a paper recently published in the journal Architectural Research Quarterly (Cambridge, UK; Vol. 1, No. 2; Dec. 1995).
series other
last changed 2002/07/07 16:01

_id b27f
authors Campbell, Dace A.
year 1996
title Design in virtual environments using architectural metaphor : a HIT lab gallery
source University of Washington
summary This thesis explores the application and limitations of architectural metaphor in the design of virtual environments. Architecture, whether physical or virtual, is the expression of a society realized as meaningful space. Physical and virtual architecture have their own constraints and context, yet both use architectural organization as a way to order forms and spaces in the environment. Both strive to create meaningful place by defining space, and both must allow the participant to develop a cognitive map to orient and navigate in the space. The lack of physics of time and space in the virtual realm requires special attention and expression of its architecture in order for the participant to cope with transitions. These issues are exemplified by the development of an on-line gallery of virtual environments. Conclusions reached by the development of this design are discussed in the context of orientation, navigation, transition, enclosure, and scale.
keywords Virtual Reality; Human-Computer Interaction
series thesis:MSc
email
more http://www.hitl.washington.edu/publications/campbell/
last changed 2003/02/12 22:37

_id ddssar9607
id ddssar9607
authors Doxtater, Dennis and Mittleman, Daniel
year 1996
title Facilitating and structuring environmental knowledge: prototypical pre-design for a new campus setting
source Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary This applied research combines state-of-the-art computer-supported facilitation process with a conceptually new way of structuring behavioral knowledge of the physical environment. The object is to develop a prototypical evaluation/pre-design/design process which can be used in practice. The paper reports on the first phase of an actual building project for a university campus where representatives from all client user groups have participated in GSS facilitated sessions. Large amounts of user information have been organized into a graphically enhanced data base including decisions on key programmatic issues. Proposed GSS sessions for the second phase envision a continuous flow of pre-design information through design and design evaluation processes.
series DDSS
last changed 2003/08/07 16:36

_id 665a
authors Haas, C.
year 1996
title Evolution of an automated crack sealer: a study in construction technology development
source Automation in Construction 4 (4) (1996) pp. 293-305
summary Demographic, regulatory and competitive forces impose increasing pressures on the construction industry. Automated pavement crack sealing is a typical example of the technology developments that are emerging in response to these industry pressures. Development of automated construction technology such as the crack sealer involves several issues including the design cycle, economic feasibility analysis, financing, and implementation. An examination of these issues, using the development of the crack sealer as a case study, leads to the conclusion that revolutionary construction technology developments are feasible and that in the United States (US) they will be financed and carried out in the form of a variety of industry, government, and academic consortia.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:22

_id 8ee5
authors Koutamanis, A., Mitossi, V.
year 1996
title SIMULATION FOR ANALYSIS: REQUIREMENTS FROM ARCHITECTURAL DESIGN
source Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary Computerization has been a positive factor in the evolution of both kinds of analysis with respect to cost, availability and efficiency. Knowledge-based systems offer an appropriate implementation environment for normative analysis which can be more reliable and economical than evaluation by human experts. Perhaps more significant is the potential of interactive computer simulation where designs can be examined intuitively in full detail and at the same time by quantitative models. The advantages of this coupling are evident in the achievements of scientific visualization. Another advantage of computational systems is that the analysis can be linked to the design representation, thereby adding feedback to the conventional visualization of designs in drawing and modeling systems. Such connections are essential for the development of design guidance systems capable of reflecting consequences of partial inadequacies or changes to other aspects in a transparent and meaningful network of design constraints.

The possibilities of computer simulation also extend to issues inadequately covered by normative analysis and in particular to dynamic aspects of design such as human movement and circulation. The paper reports on a framework for addressing two related problems, (a) the simulation of fire escape from buildings and (b) the simulation of human movement on stairs. In both cases we propose that current evaluation techniques and the underlying design norms are too abstract to offer a measure of design success, as testified by the number of fatal accidents in fires and on stairs. In addition, fire escape and stair climbing are characterized by great variability with respect to both the form of the possible designs and the profiles of potential users. This suggests that testing prototypical forms by typical users and publishing the results as new, improved norms is not a realistic proposition for ensuring a global solution. Instead, we should test every design individually, within its own context. The development of an affordable, readily available system for the analysis and evaluation of aspects such as fire escape and stair safety can be based on the combination of the technologies of virtual reality and motion capture. Testing of a design by a number of test people in an immersion space provides not only intuitive evaluations by actual users but also quantitative data on the cognitive and proprioceptive behaviour of the test people. These data can be compiled into profiles of virtual humans for further testing of the same or related designs.

keywords Model Simulation, Real Environments
series other
type normal paper
email
more http://info.tuwien.ac.at/efa/
last changed 2004/05/04 14:40

_id 44cc
authors Martens, Bob (ed.)
year 1996
title Full-scale Modeling in the Age of Virtual Reality
source Proceedings of the 6th European Full-scale Modeling Association Conference / ISBN 3-85437-132-2 / Vienna (Austria) 4-6 September 1996, 140 p.
summary In times characterized by the growing "architectural criticism"; to the same extent as by the helplessness of the anonymous user the communication process between contractors, planner and users gains in importance. If communication is successful will not only depend on the quality of the project but also on the means of conveyance, e.g. visualizing or model representation. Can planning evaluation be effectively supported by virtual reality (VR)?

The principal item of a full-scale lab preferably features a court-like facility where the 1:1 simulations are performed. Such lab facilities can be found at various architecture education centers throughout Europe. In the early eighties the European Full-scale Modeling Association (abrev. EFA, full-scale standing for 1:1 or simulation in full-scale) was founded acting as the patron of a conference every two years. In line with the conference title "Full-scale Modeling in the Age of Virtual Reality" the participants were particularly concerned with the relationship of physical 1:1 simulations and VR. The assumption that those creating architecture provide of a higher degree of affinity to physical than to virtual models and prototypes was subject of vivid discussions.

Furthermore, the participants devoted some time to issues such as the integration of model-like ideas and built reality thus uncovering any such synergy-effects. Thus some major considerations had to be given to the question of how the architectís model-like ideas and built reality would correspond, also dealing with user-suitability as such: what the building artist might be thrilled with might not turn out to be the residentsí and usersí everyday delight. Aspects of this nature were considered at the îArchitectural Psychology Meeting” together with specialists on environment and aesthetics. As individual space perception as well as its evaluation differ amongst various architects, and these being from various countries furnishing cultural differences, lively discussions were bound to arise.

keywords VR, Virtual Reality, Simulation in Full-scale, Model Simulation, Real Environments
series other
email
more http://info.tuwien.ac.at/efa/EFA-Proceedings.html
last changed 2003/08/25 10:12

_id 0bbd
authors Martens, Bob
year 1996
title ON THE RELATION OF SIMULATION IN FULL SCALE AND VIRTUAL REALITY
source Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary In line with the conference title “Full-scale Modeling in the Age of Virtual Reality” the participants will particularly concern themselves with the relationship of physical 1:1 simulations and VR. If the assumption holds true that those creating architecture provide of a higher degree of affinity to physical than to virtual models and prototypes will be subject of discussions. Furthermore, the participants will devote some time to issues such as the integration of model-like ideas and built reality thus uncovering any such synergy-effects.

In times characterized by the growing “architectural criticism” to the same extent as by the helplessness of the anonymous user the communication process between contractors, planer and users gains in importance. If communication is successful will not only depend on the quality of the project but also on the means of conveyance, e.g. visualizing or model representation. Can planning evaluation be effectively supported by virtual reality (VR)?

keywords Model Simulation, Real Environments
series other
type normal paper
email
more http://info.tuwien.ac.at/efa/
last changed 2004/05/04 12:38

_id c7e9
authors Maver, T.W.
year 2002
title Predicting the Past, Remembering the Future
source SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series SIGRADI
email
last changed 2016/03/10 09:55

_id ddssar9623
id ddssar9623
authors Mitossi, V. and Koutamanis, A.
year 1996
title Parametric design of stairs
source Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary Stairs represent one of the oldest and most intricate design problems in architecture. Aesthetics, pedestrian circulation, construction and safety combine to create a complex network of factors. Despite the essentially parametric nature of stairs, designers have been eager to adopt and apply simplistic standardization schemes, often unrelated to safety issues. Moreover, while there are several computerized systems for the automated design of stairs, there has been little if any interest in the computer-based analysis of stair designs. The objective of our research has been to develop a transparent and flexible computer system for the design and analysis of stairs. The system employs constraint propagation networks for the calculation of stair dimensions in generation and for the correlation of floor levels to stairs and their dimensions in analysis. Computerization also allows us to re-examine and refine the norms underlying stair design. We propose that our understanding of stair design can be improved by the analysis of proprioceptive sizes in ascent and descent. Simulation of these sizes with virtual robots combines accurate measurement with visual evaluation. This combination facilitates the effortless and direct integration of advanced technologies and new methods in architectural design.
series DDSS
last changed 2003/08/07 16:36

_id 2fb2
authors Murison, Alison
year 1996
title Computer Based Learning for Architecture Students; A Methodology for Evaluating the Teaching and Learning
source Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 287-292
doi https://doi.org/10.52842/conf.ecaade.1996.287
summary The paper describes a methodology applied to the production, and evaluation of a computer based teaching package. In producing multimedia materials for teaching or for presentation, too much emphasis is sometimes given to the beauty of the images while not enough thought is given to the structure of the material. Is the student or "viewer" led through all the most important information? Can the use of computer based learning improve the quality of the teaching and learning experience? These issues are addressed, using as an example the production and testing of a package designed to complement a course on History of Scottish Architecture intended for senior students and especially to emphasise the Scottish context for exchange students. The package describes Linlithgow Palace in Scotland, showing how the contemporary political links between the Scotland and Italy were influential in the development of Renaissance architecture in Scotland.
series eCAADe
email
more http://www.hw.ac.uk/
last changed 2022/06/07 07:59

_id a8b6
authors Oliver, S. and Betts, M.
year 1996
title An information technology forecast for the architectural profession
source Automation in Construction 4 (4) (1996) pp. 263-279
summary Much of our research in IT in construction is concerned with developing technologies and prescribing how they can be applied to construction problems. Our rationale for our choice of technologies to push is often unstated and the relative significance of a range of technologies is rarely considered. The impact of emerging technologies on the strategic health of companies and professions is also rarely discussed. Few professions appear to be explicitly in control of how IT will impact their future. This paper addresses both of these issues through the example of an IT forecast for the architectural profession. It does this by examining issues of technology forecasting and development by reviewing currently emerging IT's and by conducting an opinion survey of which are of greatest significance to the architectural profession. The result is a relative assessment of the importance to architects of 10 technological mini-scenarios from which an overall architectural IT scenario is constructed.
series journal paper
more http://www.elsevier.com/locate/autcon
last changed 2003/05/15 21:23

_id ddssup9618
id ddssup9618
authors Stamps, Arthur E.
year 1996
title Significant visual impact: Is it or isn't it?
source Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary Thirty-eight countries, from all continents except Antarctica, have formal environmental impact review procedures. These impact procedures typically require distinctions between "significant impacts" and "non-significant" impacts. For some issues, such as visual quality, distinguishing the major from the trivial impacts is especially difficult. This paper outlines a theory of visual impacts, shows how the theory can be implemented, and illustrates the theory with three cases histories and a survey of research on the effects of various planning policies. The case histories are examples of statutory and discretionary design review in California and include specifying bay windows on houses, specifying contextual fit, and a before and after study of decisions of a review board. The talk concludes with a discussion of the ranges over which the theory will or will not be applicable and of the opportunities for future cooperative international research.
series DDSS
email
last changed 2003/08/07 16:36

_id ddssar9631
id ddssar9631
authors Stouffs, Rudi and Krisbnamurti, Ramesh
year 1996
title The Extensibility and Applicability of Geometric Representations
source Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary As designers pose new questions, within the context of computational design, that go beyond geometry and require other information to be included, there is, now more than ever, a need for extensible geometric representations. We believe that such can best be achieved using abstract data types defined over a set of basic operations, common to all data types. At the same time, we must consider the applicability of such a representation with respect to the functionalities of the application. In this paper, we explore these issues of extensibility and applicability as these relate to the questions of standardization and adaptability of representations. As a particular example, we consider an algebraic model, with a corresponding representation, that defines arithmetic operations that operate uniformly and consistently on geometries and on non-geometric attributes of various kinds.
series DDSS
last changed 2003/08/07 16:36

_id ddssar9633
id ddssar9633
authors Szalapaj, Peter and Kane, Andrew
year 1996
title Techniques of Superimposition
source Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary This paper addresses the issues of 2-D and 3-D image manipulation in the context of a Computational Design Formulation System. The central feature of such a system is the ability to bring together two or more design objects in the same reference space for the purpose of analysis. Studies of traditional design methods has revealed the effectiveness of this technique of superimposition. This paper describes ways in which superimposition can be achieved, and, in particular, focuses on a range of domain-independent knowledge-based graphical operators that enable the decomposition of complex design forms into simpler aspects (secondary models) that can then be superimposed and/or analysed from a design-theoretic point of view. Examples of domain-independent knowledge-base graphical operators include object selection, planar bisection, 2-D closure (the grouping of lines into regions), aggregation (the decomposition of 2-D regions into aggregations of lines), spatial bisection, 3-D closure (the grouping of 2-D regions into volumes), 3-D aggregation (the decomposition of volumes into aggregations of 2-D regions). The representation of these operators is dependent upon the notion of a parameterisable volume, thus avoiding the need for translations between multiple representations of graphical objects by providing a common representation form for all objects. Secondary models can therefore subsequently be manipulated either through subtractive procedures (e.g. carving voids from solids), or by additive ones (e.g. assembling given design elements), or by other means such as transformation or distortion. The same techniques of superimposition can also be used to support the visualisation of design forms in two ways: by the juxtaposition of plans and sections with the 3-D form; by the multiple superimposition of alternative design representations e.g. structural schematic, parti schematic, volumetric schematic and architectural model.
keywords Design Formulation, Superimposition, Primary Model, Secondary Model, Parameterisable Volume
series DDSS
last changed 2003/08/07 16:36

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 24HOMELOGIN (you are user _anon_730627 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002