Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 491

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2020_093
id	caadria2020_093
authors	Cerovsek, Tomo and Martens, Bob
year	2020
title	The Evolution of CAADRIA Conferences - A Bibliometric Approach
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 325-334
doi	https://doi.org/10.52842/conf.caadria.2020.1.325
summary	This paper presents an analysis of the output, impact, use and content of 1,860 papers that were published in the CAADRIA conference proceedings over the last 20+ years (from 1996 to 2019). The applied methodology is a blend of bibliometrics, webometrics and clustering with text mining. The bibliometric analysis leads to quantitative and qualitative results on three levels: (1) author, (2) article and (3) association. The most productive authors authored over 50 papers, and the top 20% authors have over 80 % of all citations generated by CAADRIA proceedings. The overall impact of CAADRIA may be characterised by nearly 2,000 known citations and by the h-index that is 17. The webometrics based on CumInCAD.org reveals that the CAADRIA papers served over 200 k users, which is a considerable visibility for scientific CAAD output. The keywords most frequently used by authors were digital fabrication, BIM and parametric, generative, computational design. Notably, 90% of the papers' descriptors are 2-grams. This study may be useful to researchers, educators and publishers interested in CAAD.
keywords	bibliometrics; open source; text clustering; n-gram
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	7b57
authors	Chase, Scott Curland
year	1996
title	Modeling Designs with Shape Algebras and Formal Logic
source	University of California
summary	A formal, hierarchical model of shape, spatial relations and non-spatial properties is presented, constructed from first principles of geometry, topology and logic. The combination of the two major paradigms used here, shape algebras and logic, is one which has been largely unexplored. The underlying interest is the development of generalized design modeling systems in which the components may be used for a variety of synthesis and recognition problems. The algebras of shape described by Stiny have been shown to be useful in the generation and analysis of designs. The generality of their representations, their non-reliance upon predetermined structure, and their use in combination provide a richness of expression lacking in more traditional representations. The use of formal logic as a specification tool for modeling spatial relations is investigated here. Logic has proven itself useful as a programming and specification tool, providing advantages over traditional procedural programming methods. Among those is the ability to specify the knowledge to be encapsulated in a model without the need to specify data manipulation procedures. It is argued that specification in logic provides a natural method of development. The model is developed by extending the formalisms of shape algebras with the use of logic to make more precise, generalized, parametric definitions of shape and spatial relations than has been previously possible. The value of such a model is demonstrated by the use of these generalized spatial relations for solving typical problems in the fields of geographic information systems and architecture. The advantages of the representations used over more traditional 'kit-of-parts' models is also illustrated.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	1aa5
authors	Huangb, X., Gub, P. and Zernickea, R.
year	1996
title	Localization and comparison of two free-form surfaces
source	Computer-Aided Design, Vol. 28 (12) (1996) pp. 1017-1022
summary	Comparison of two free-form surfaces based on discrete data points is of paramount importance for reverse engineering. It can be used to assess the accuracy of the reconstructed surfaces and to quantify thedifference between two such surfaces. The entire process involves three main steps: data acquisition, 3D feature localization and quantitative comparison. This paper presents models and algorithms for 3D featurelocalization and quantitative comparison. Complex free-form surfaces are represented by bicubic parametric spline surfaces using discrete points. A simple yet effective pseudoinverse algorithm was developed andimplemented for localization. It consists of two iterative operations, namely, constructing a pseudo transformation matrix and point matching. A computing algorithm was developed to compare two such surfacesusing optimization techniques. Since this approach does not involve solving non-linear equations for the parameters of positions and orientations, it is fast and robust. The algorithm was implemented and testedwith several examples. It is effective and can be used in industry for sculptured surface comparison.
keywords	Free-Form Sculptured Surface, Localization, Point Matching, Surface Comparison
series	journal paper
last changed	2003/05/15 21:33

_id	ddssar9623
id	ddssar9623
authors	Mitossi, V. and Koutamanis, A.
year	1996
title	Parametric design of stairs
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Stairs represent one of the oldest and most intricate design problems in architecture. Aesthetics, pedestrian circulation, construction and safety combine to create a complex network of factors. Despite the essentially parametric nature of stairs, designers have been eager to adopt and apply simplistic standardization schemes, often unrelated to safety issues. Moreover, while there are several computerized systems for the automated design of stairs, there has been little if any interest in the computer-based analysis of stair designs. The objective of our research has been to develop a transparent and flexible computer system for the design and analysis of stairs. The system employs constraint propagation networks for the calculation of stair dimensions in generation and for the correlation of floor levels to stairs and their dimensions in analysis. Computerization also allows us to re-examine and refine the norms underlying stair design. We propose that our understanding of stair design can be improved by the analysis of proprioceptive sizes in ascent and descent. Simulation of these sizes with virtual robots combines accurate measurement with visual evaluation. This combination facilitates the effortless and direct integration of advanced technologies and new methods in architectural design.
series	DDSS
last changed	2003/08/07 16:36

_id	49d6
authors	Rubinowicz, P.
year	1996
title	Computer Parametric Modeling as a New Design Strategy
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 205-214
summary	Computer Aided Design means not only aiding the preparation of technical documentation for building purposes or for the presentation of architectural design. The application of computer technology has a deeper meaning, when used for the creative modelling of designed objects and spaces. This article will help to define and describe Computer Parametric Modelling as an example of creative computer use. All conclusions presented in this article are based on a four year long working experience using the computer program MODEL; utilising parametric modelling in architectural and town-planning design by the author of this article. This program was created by the author and he is the only user at the present time, but it is hoped that it will be available for general use in the future.
series	plCAD
last changed	1999/04/09 15:30

_id	5876
authors	Tapia, Mark Andrew
year	1996
title	From shape to style. Shape grammars: Issues in representation and computation, presentation and selection
source	University of Toronto
summary	Shape grammars provide a graphical mechanism for generating a variety of shapes. A shape grammar is a production system for specifying recursive graphical computations for shapes (finite arrangements of finite lines of non-zero length). The dissertation considers design as a plan in art and confines itself to abstract designs composed of lines of uniform color and thickness. The dissertation develops an implementation of shape grammars in which the drawing is the computation. Restricting itself to non-parametric shape grammars, the dissertation approaches the area as two related topics: computation and representation delineate the internal aspects of the problem; presentation and selection are crucial to the user interface. The dissertation applies shape grammars to design, promoting three claims: First, that this dissertation advances the field of shape grammars, by combining approaches in the humanities with those in science, articulating the issues and providing a solid foundation for future work. Second, supporting quality design depends on enumerating the alternatives and pruning the design space using the visual aspects of design. Third, the generative aspect of design is not as important as its presentation and selection.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	2b76
authors	Winkenbach, G. and Salesin, D.H.
year	1996
title	Rendering free-form surfaces in pen and ink
source	Computer Graphics Proceedings, Annual Conference Series 1996. ACM SIGGRAPH, pp. 469-476.
summary	This paper presents new algorithms and techniques for rendering parametric free-form surfaces in pen and ink. In particular, we introduce the idea of "controlled-density hatching" for conveying tone, texture, and shape. The fine control over tone this method provides allows the use of traditional texture mapping techniques for specifying the tone of pen-and-ink illustrations.We also show how a planar map, a data structure central to our rendering algorithm, can be constructed from parametric surfaces, and used for clipping strokes and generating outlines. Finally, we show how curved shadows can be cast onto curved objects for this style of illustration.
series	other
last changed	2003/04/23 15:50

_id	a9ca
authors	Abadi Abbo, Isaac
year	1996
title	EFFECTIVENESS OF MODELS
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Architects use many types of models to simulate space either in their design process or as final specifications for building them. These models have been proved useful or effective for specific purposes. This paper evaluates architectural models in terms of five effectiveness components: time of development, cost, complexity, variables simulated and ecological validity. This series of models, used regularly in architecture, are analysed to finally produce a matrix that shows the effectiveness of the different models for specific purposes in architectural design, research and education. Special emphasis is given to three specific models: 1/10 scale, full-scale and computer generated.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa/
last changed	2016/02/17 13:47

_id	ascaad2004_paper11
id	ascaad2004_paper11
authors	Abdelfattah, Hesham Khairy and Ali A. Raouf
year	2004
title	No More Fear or Doubt: Electronic Architecture in Architectural Education
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combined with technologies to communicate images, data, and “live” action, now enable virtual dimensions of studio experience. Students no longer need to gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up—if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to support collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The challenge is to predict whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	846c
authors	Achten, Henri
year	1996
title	Generic Representations: Intermediate Structures in Computer Aided Architectural Composition.
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 9-24
summary	The paper discusses research work on typological and generic knowledge in architectural design. Architectural composition occurs predominantly through drawings as a medium. Throughout the process, architects apply knowledge. The paper discusses the question how to accommodate this process in computers bearing in mind the medium of drawings and the application of knowledge. It introduces generic representations as one particular approach and discusses its implications by the concept of intermediate structures. The paper concludes with an evaluation of the presented ideas.
keywords
series	other
email
last changed	1999/04/08 17:16

_id	2dbc
authors	Achten, Henri
year	1996
title	Teaching Advanced Architectural Issues Through Principles of CAAD
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 7-16
doi	https://doi.org/10.52842/conf.ecaade.1996.007
summary	The paper discusses the differences between teaching CAAD by using standard software ("off-the-shelf"-software) and teaching the principles of CAAD ("principles-teaching"). The paper distinguishes four kinds of application for design systems in education: social systems, professional systems, educational systems, and innovative systems. The paper furthermore proposes to distinguish between computational issues and architectural issues relative to design systems. It appears that there is not a principled distinction between software-teaching and principles-teaching when it comes to computational issues of design systems. However, when the architectural content of CAAD systems is concerned, then principles of CAAD systems seem to be more appropriate for teaching. The paper presents work on generic representations as a specific case. Generic representations can be used to teach one particular kind of architectural content of design systems. The paper ends with conclusions.
series	eCAADe
email
more	http://www.ds.arch.tue.nl/
last changed	2022/06/07 07:54

_id	63e6
authors	Af Klercker, Jonas
year	1996
title	Visualisation for Clients - One Example of Educating CAAD for Practice
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 17-24
doi	https://doi.org/10.52842/conf.ecaade.1996.017
summary	During the spring term 1996, 13 students of the 3rd and 4th year at the School of Architecture at Lund University had the opportunity to make a one semester CAAD project. 11 students chose the individual exercise to use computer media for developing a small architectural design in interaction with a client. The focus was set more on visualization and the process of communicating ideas, feelings and practical solutions between architect and client and visa versa rather than concentrated on the final product. This paper describes the process of the project and the reflections of the participants. It will discuss problems from the teachers point of view.
series	eCAADe
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:54

_id	1fb3
authors	Akin, O., Cumming, M., Shealey, M. and Tuncer, B.
year	1997
title	An electronic design assistance tool for case-based representation of designs
source	Automation in Construction 6 (4) (1997) pp. 265-274
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case-based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case-base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4cda
authors	Akin, O., Cumming, M. , Shealey, M. and Tuncer, B.
year	1996
title	An Electronic Design Assistance Tool for Case Based Representation of Designs
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 123-132
doi	https://doi.org/10.52842/conf.acadia.1996.123
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996, and will be used in future studios, as well.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	d35f
authors	Akin, O.
year	1997
title	Researching Descriptive Models of Design
source	Automation in Construction 7 (2-3) (1998) pp. 97-100
summary	This special double issue is a result of the international symposium and workshop on „Descriptive Models of Design“ wich was held during July 1-5, 1996, at Istanbul Technical University, Istanbul, Turkey. The primary goal of the symposium was to promote greater understanding and to develop recommendations for funding policy and practices in the area of descriptive models of design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c204
authors	Aleksander Asanowicz
year	1996
title	Teaching and Learning - Full Brainwash
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 51-54
doi	https://doi.org/10.52842/conf.ecaade.1996.051
summary	We often speak of changes in design process due to an application of computers. But in my opinion we more often rather speak of lack of changes. Lets hope that some day we will be able to witness full integrity and compatibility of design process and tools applied in it. Quite possible such an integrity may occur in the cyberspace. Nevertheless before that could happen some changes within the teaching methods at faculties of architecture, where despite great numbers of computer equipment used, the students are still being taught as in the XIX century. In terms of achieved results it proves ineffective because application of chalk and blackboard only will always loose to new media, which allow visual perception of dinosaurs in Jurassic Park. Our civilisation is the iconographic one. And that is why teaching methods are about to change. An application of computer as simply a slide projector seems to be way too expensive. New media demands new process and new process demands new media. Lets hope that could be achieved in cyberspace as being a combination of: classic ways of teaching, hypertext, multimedia, virtual reality and a new teaching methodology (as used in Berlitz English School - full brainwash). At our faculty several years ago we experimentally undertook and applied an Integrated Design Teaching Method. A student during design process of an object simultaneously learnt all aspects and functions of the object being designing i.e.: its structure, piping and wiring, material cost and even historic evolution of its form and function. Unfortunately that concept was too extravagant as for the seventies in our reality. At present due to wide implementation of new media and tools in design process we come to consider reimplementation of IDTM again.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	31f5
authors	Alfares, M. and Seireg, A.
year	1996
title	An integrated system for computer-aided design and construction of reinforced concrete buildings using modular forms
source	Automation in Construction 5 (4) (1996) pp. 323-341
summary	The study reported in this paper investigates the feasibility of automating the on-site construction of reinforced concrete residential buildings. The basic construction tasks are identified, analyzed and modified with a view towards potential for automation. Emphasis is placed on developing modular forms that facilitate automation. The majority of work in the field of construction robotics has focused on the adaptation of existing industrial robots to automate traditional construction processes. This paper outlines a computer-aided construction system approach specially suited for integrating design and implementation by on-site robots. A Computer-Integrated Construction (CIC) system, similar to CIM, is developed that includes a CIC data-base, a construction design system, a construction production/process planning system, and a robotics execution system. This approach is intended to minimize the redesign effort as well as the need for on-site manual work.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	6ec6
authors	Alsayyad, Nezar, Elliott, Ame and Kalay, Yehuda
year	1996
title	Narrative Models: A Database Approach to Modeling Medieval Cairo
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 247-254
doi	https://doi.org/10.52842/conf.acadia.1996.247
summary	This paper explores the use of three-dimensional simulations to investigate transformations of urban form in medieval Cairo, and lessons about using computers to support historical visualization. Our first attempt to create a single extremely detailed model of Cairo proved unworkable. From this experience we developed a database approach to organizing modeling projects of complex urban environments. The database consists of several complete models at different levels of abstraction. This approach has three advantages over the earlier one: the model is never viewed as incomplete, the framework supports both additive and subtractive chronological studies, and finally, the database is viewed as infinitely expandable. Using modeling software as a tool for inquiry into architectural history becomes more feasible with this new approach.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	8a25
authors	Alshawi, M. and Underwood, J.
year	1996
title	Applying object-oriented analysis to the integration of design and construction
source	Automation in Construction 5 (2) (1996) pp. 105-121
summary	This paper implements an Object Oriented Analysis technique to model information related to design and construction. In a previous study, an approach to integrate design and construction processes based upon information analysis and modelling has been proposed. By breaking down the project's vast information into groups of related information, construction related problems have been identified and then traced back too their relevant design processes. This paper models this process using a relatively young and new method of analysis rather than a traditional structured approach. An Object-Oriented Analysis (OOA) method has been applied to model the information in terms of the fundamental ideas that underlie object-oriented technology i.e. object types and classes, methods, requests, encapsulation and inheritance. Proceeding through the five major activities of Coad and Yourdon's OOA method, a complete OOA model has been developed with potential to improve the construction related problems.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: