Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 490

Reformat results as: short short into frame detailed detailed into frame

_id	2192
authors	Mahdavi, A., Mathew, P., Hartkopf, V. and Loftness, V.
year	1996
title	Bi-directional Inference in Thermal Design
doi	https://doi.org/10.52842/conf.acadia.1996.133
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 133-143
summary	This paper demonstrates a computational bi-directional energy modeling approach for building design development. Conventional simulation tools may be labeled as mono-directional in that they require a more or Iess complete design definition in order to derive performance indicators. However, in certain circumstances, it may be desirable to reverse this process: a bi-directional (or "open") inference mechanism would allow for the identification of those changes in the design variables that would accommodate a desired change in a performance indicator. The performance-to-design mapping process is an ambiguous one: the same performance (e.g. energy use of a building, temperature variations in a space) may be achieved by different design configurations (various wall and window dimensions/properties, building orientation/massing, etc.). As a result, the actual implementation of a bi-directional inference tool is a rather difficult task. The development described in this paper utilizes a preference-based approach that involves the formalization of various external or internal constraints and preferences (such as code and standard requirements, results of post-occupancy studies, individual priorities of designers and their clients, etc.) in terms of normalized numeric scales. After a brief review of the underlying technology for the implementation of the inference engine, the paper demonstrates an actual design session using a bi-directional thermal simulation tool. Specifically, a use-scenario is described in which the designer explores the tradeoffs between various design variables (glazing area, glazing type, and floor mass) in view of the resulting energy performance of a typical residential building. The paper concludes with a discussion of the potential and limitations of the bi-directional approach toward active convergence support for performance-oriented design development.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	934f
authors	Gross, M.D.
year	1996
title	The Electronic Cocktail Napkin – a computational environment for working with design diagrams
source	Design Studies, 17 (1), pp. 53-69
summary	The Electronic Cocktail Napkin is an experimental computer-based environment for sketching and diagramming in conceptual design. The project's goal is to develop a computational drawing environment to support conceptual designing in a way that leads smoothly from diagrams to more formal and structured representations of schematic design. With computational representations for conceptual designs, computer-supported editing, critiquing, analysis, and simulation can be employed earlier in the design process, where it can have a greater impact on outcomes. The paper describes the Electronic Cocktail Napkin program - its recognition and parsing of diagrams and management of spatial constraints, its drawing environment, and two experimental query-by-diagram schemes for retrieving information from architectural databases.
series	journal paper
email
last changed	2003/04/23 15:50

_id	e09a
authors	Rüdiger, Bjarne
year	1996
title	The Masonry House Raised as an Exhibition and Information Building
doi	https://doi.org/10.52842/conf.ecaade.1996.387
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 387-390
summary	At many schools of architecture the studies are directed to practical, professional use, and this fact results in different attitudes. But normally, it will be so that the longer the student goes in the study the more aspects from practice will be involved. Therefore, the studies passes from the work with the design itself and the more artistic sides to the work with planning and production. The basis of the educational progress and the professional level is research and development. Within CAD it is important that this research develops as well the theoretical foundation and includes experience in the practical use. An attitude which prioritizes the practical qualifications late in the studies has of course an effect in the CAD instruction. Tendencies to consider the computer to be a tool of drawing and visualization will dominate, and the work with structuralized information models for a general documentation has had minor interest until now, and this also includes the use of professional applications developed from different conventions in support of collaboration and quality control. The dialogue between the environment of education and research on one hand and the professional business in practice must be considered important for the developing process in the use of CAD and for the building of usable IT models. The work with "The Masonry House" and later "The Building Trade House" tries to expose how a deliberate structuralization of the CAD model early in the sketching- and planning process can support as well the more esthetic estimates as the building technology documentation. And also point out the professional qualifications bound up with 11 to be integrated in the study course.
series	eCAADe
email
last changed	2022/06/07 07:56

_id	73a3
authors	Case, Michael P.
year	1996
title	Discourse Model for collaborative design
source	Computer-Aided Design, Vol. 28 (5) (1996) pp. 333-345
summary	A Discourse Model, including a structure and a process, is developed that provides software support for collaborative engineering design. The model shares characteristics of other design systems in the literature,including frames, constraints, semantic networks, and libraries of sharable design objects. It contributes a new model for conflict-aware agents, dynamic identification and dissemination of agent interest sets, avirtual workspace language, automatic detection of conflict, and a unique protocol for negotiation that ensures that interested agents have an opportunity to participate. The model is implementation independent andapplicable to many research and commercial design environments currently available. An example scenario is provided in the architecture/engineering/construction domain that illustrates collaboration during theconceptual design of a fire station.
keywords	Agent, Conflict, Discourse Design Collaboration, Concurrent Engineering, Blackboard Architecture, KQML
series	journal paper
last changed	2003/05/15 21:33

_id	ddssar9635
id	ddssar9635
authors	Vasquez de Velasco de la Puente, G.P. and Angulo MendIvil, A.H.
year	1996
title	Professional Decision Support Clients and Instructional Knowledge Based Servers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The paper sets its focus on the problem of supporting the decision making process of the architect by means of Knowledge Based Systems that tend to concentrate on narrow domains of knowledge and fail to support global domain integration in our path towards an architectural synthesis. In response to this concern, the paper recognises the theoretical soundness of Integrated Decision Support Systems that seek the articulation of diversified knowledge based resources in pursue of achieving integral design support, but at the same time, the paper needs to acknowledge the multiple factors that have limited their wide spread development, in particular: lack of true commercial interest and a related absence of relevant authorship. From a conceptual and a commercial perspective, the paper transfers the traditional development scenario of our Integrated Decision Support Systems, and their array of knowledge based resources, into the market place of world-wide networks where Integrated Decision Support Platforms may perform as professional high-end clients and Knowledge Based Systems may be clustered within multimedia instructional servers. The paper ends by making reference to the positive reaction of a given group of practising architects that were recently exposed to a simulation of the intelligent front-end of a professional decision support client.
series	DDSS
last changed	2003/08/07 16:36

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	6abd
authors	Dawson, Anthony and Burry, Mark
year	1996
title	The Continuing Dichotomy: Practice vs. Education
doi	https://doi.org/10.52842/conf.ecaade.1996.131
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 131-142
summary	While it is apparent from the architectural literature that some practices are innovative in their use of computers for architectural design, clear evidence indicates that most architectural practices have applied computing to traditional practice paradigms. Information technology is therefore being applied to practice systems which were in place prior to computers being available. This has significant implications for architectural education in which there is tension developing between the requirements of the commercially oriented architectural practice and the innovation driven computer-aided architectural design educator. The first wishes to equip graduates for immediate and productive employment in computerised architectural practices and may be loosely interpreted as a graduate’s ability to work as a CAD operator within an architectural practice environment. The second has the desire for students to be innovative in their use of information technology as an aid in informing and evaluating parts of both the design process and its outcomes. However, it is only when both architects and educators identify the architectural process as an integrated information system that these tensions can be resolved. This requires reconsideration of the function and use of information technology in both educational institutions and in architectural practices. The paper discusses how fruitful this can be in the current environment and outlines current developments at Deakin University which aim at providing a middle ground
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acb9
authors	Do, Ellen Yi-Luen
year	1996
title	The Right Tool at the Right Time - Drawing as an Interface to Knowledge Based Design Aids
doi	https://doi.org/10.52842/conf.acadia.1996.191
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 191-199
summary	Designers use different symbols and diagrams in their drawings to explore alternatives and to communicate with each other. Therefore, a useful design environment should attempt to infer the designer's intentions from the drawing and, based on this inference, suggest appropriate computational tools for the task at hand. For example, a layout bubble diagram might activate design cases with similar configurations. Scribbles of view lines on a floor plan might bring up a spatial analysis tool. This research aims to develop an integrated digital sketching environment to support early design activities. The paper proposes RT, an intelligent sketch environment that provides the designers with the right tools at the right time.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ec0e
authors	Engeli, M. and Kurmann, D.
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	H.J.P. Timmermans (ed.), Design and Decision Support Systems in Architecture and Urban Planning Conference, Vol. 1: Architecture Proceedings, pp. 132-142
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to experience rooms and 3D input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 3D model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	other
last changed	2003/04/23 15:50

_id	5273
authors	Gortib, Sreenivasa R. and Srirama, Ram D.
year	1996
title	From symbol to form: a framework for conceptual design
source	Computer-Aided Design, Vol. 28 (11) (1996) pp. 853-870
summary	This paper presents the design of a software framework for conceptual design. It develops an approach to mapping an evolving symbolic description of design into a geometric description. The distinct elements ofthe symbol-form mapping are: (a) deriving spatial relationships between objects as a consequence of the functional relationship; (b) instantiating alternative feasible solutions subject to these relationships; and (c)presenting the evolving descriptions of geometry. Computational support for each of these elements is provided within a conceptual design framework. The paper presents components of the framework, explicitlyidentifies interactions between these components, and explains how these interactions are developed into an integrated framework. It presents the rationale for the design decisions made in the framework. Anexample is presented to clarify the approach adopted. The applicability of the approach is then discussed.
keywords	Conceptual Design, Symbol-Form Mapping, Knowledge-Based Systems, Knowledge Representation, Constraint Satisfaction
series	journal paper
last changed	2003/05/15 21:33

_id	2f3c
authors	Jabi, Wassim
year	1996
title	An Outline of the Requirements for a Computer-Supported Collaborative Design System
source	Open House International, vol. 21 no 1, March 1996, pp. 22-30
summary	Computer-Aided Architectural Design (CAAD) systems have adequately satisfied several needs so far. They have dramatically improved the accuracy and consistency of working drawings, enabled designers to visualize their design ideas in three-dimensions, allowed the analysis of designs through data exchange and integrated databases, and even allowed the designers to evaluate (and in some cases generate) designs based on comparisons to previous cases and/or the formalization of grammars. Yet, there is a consensus that CAAD systems have not yet achieved their full potential. First, most systems employ a single-user approach to solving architectural problems which fails to grapple with the fact that most design work is done through teamwork. Second, current systems still can not support early design stages which involve client briefing, data collection, building program formulation, and schematic design generation. This paper seeks to study remedies to both of the afore-mentioned limitations through focusing on the fundamental dialectic and collaborative nature of what is called designing: a concerned social activity that proceeds by creating architectural elements to address a set of requirements and their re-thinking as a result of architectural conjecture. To investigate this relationship, it is proposed to build a computer-supported collaborative design environment using the tools of conceptual modeling, object-oriented algorithms, and distributed agents. Based on findings regarding the role of artifacts in collaborative design and a literature survey, this paper concludes with an outline of the requirements for the above system.
keywords	Computer Supported Collaborative Design
series	other
email
last changed	2002/03/05 19:54

_id	2a99
authors	Keul, A. and Martens, B.
year	1996
title	SIMULATION - HOW DOES IT SHAPE THE MESSAGE?
source	The Future of Endoscopy [Proceedings of the 2nd European Architectural Endoscopy Association Conference / ISBN 3-85437-114-4], pp. 47-54
summary	Architectural simulation techniques - CAD, video montage, endoscopy, full-scale or smaller models, stereoscopy, holography etc. - are common visualizations in planning. A subjective theory of planners says "experts are able to distinguish between 'pure design' in their heads and visualized design details and contexts like color, texture, material, brightness, eye level or perspective." If this is right, simulation details should be compensated mentally by trained people, but act as distractors to the lay mind. Environmental psychologists specializing in architectural psychology offer "user needs' assessments" and "post occupancy evaluations" to facilitate communication between users and experts. To compare the efficiency of building descriptions, building walkthroughs, regular plans, simulation, and direct, long-time exposition, evaluation has to be evaluated. Computer visualizations and virtual realities grow more important, but studies on the effects of simulation techniques upon experts and users are rare. As a contribution to the field of architectural simulation, an expert - user comparison of CAD versus endoscopy/model simulations of a Vienna city project was realized in 1995. The Department for Spatial Simulation at the Vienna University of Technology provided diaslides of the planned city development at Aspern showing a) CAD and b) endoscopy photos of small-scale polystyrol models. In an experimental design, they were presented uncommented as images of "PROJECT A" versus "PROJECT B" to student groups of architects and non-architects at Vienna and Salzburg (n= 95) and assessed by semantic differentials. Two contradictory hypotheses were tested: 1. The "selective framing hypothesis" (SFH) as the subjective theory of planners, postulating different judgement effects (measured by item means of the semantic differential) through selective attention of the planners versus material- and context-bound perception of the untrained users. 2. The "general framing hypothesis" (GFH) postulates typical framing and distraction effects of all simulation techniques affecting experts as well as non-experts. The experiment showed that -counter-intuitive to expert opinions- framing and distraction were prominent both for experts and lay people (= GFH). A position effect (assessment interaction of CAD and endoscopy) was present with experts and non-experts, too. With empirical evidence for "the medium is the message", a more cautious attitude has to be adopted towards simulation products as powerful framing (i.e. perception- and opinion-shaping) devices.
keywords	Architectural Endoscopy, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/eaea/
last changed	2005/09/09 10:43

_id	010d
authors	Kokosalakis, Jen
year	1996
title	The Role and Status of Computing and Participation of Design Clients in the Curriculum
doi	https://doi.org/10.52842/conf.ecaade.1996.227
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 227-238
summary	This paper is not intended as a fully researched exploration into architecture course coverage, but an attempt to introduce debate regarding some concerns on the role and status of Computing and consumer participation in the hope that CAAD peers will discuss and reflect with other specialists. A number of commentaries on serious deficiencies in the education of architects point to poor take-up of computing into the curriculum and an almost disassociation of the eventual designed building user from decisions on the design. By comparison it seems easier to find architects today who involve clients almost throughout the design process and increasing competency and continuity of CAAD usage in practices. The few brief references to Schools’ curricula are not formalised random studies. Certainly many excellent features will have been omitted. The intention is to start the debate. Finally a few directions are noted and some conclusions proffered. An argument is made for 3D CAAD models as the backbone and direct negotiating focus for design arbitration between consumer, designer [or students] and other professional collaborators in tesigning buildings, particularly where complex forms and spatial relationships are involved.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	cc90
authors	Kolarevic, Branko
year	1998
title	CAD@HKU
doi	https://doi.org/10.52842/conf.acadia.1998.016
source	ACADIA Quarterly, vol. 17, no. 4, pp. 16-17
summary	Since 1993, we have experimented with Virtual Design Studios (VDS) as an on-going research project that investigates the combination of current computer-aided design (CAD), computer networks (Internet), and computer supported collaborative work (CSCW) techniques to bring together studentsat geographically distributed locations to work in a virtual atelier. In 1993 the theme of the first joint VDS project was in-fill housing for the traditional Chinese walled village of Kat Hing Wai in the New Territories north of Hong Kong, and our partners included MIT and Harvard in Boston (USA), UBC in Vancouver (Canada), and Washington University in St. Louis (USA). In 1994 we were joined by Cornell (USA) and Escola Tecnica Superior d’Arquitectura de Barcelona (Spain) to re-design Li Long housing in Shanghai, and 1995 added the Warsaw Institute of Technology (Poland) for the ACSA/Dupont competition to design a Center for Cultural and Religious Studies in Japan. The 1996 topic was an international competition to design a monument located in Hong Kong to commemorate the return of Hong Kong to Chinese sovereignty in 1997. Communication was via e-mail, the WorldWide Web with limited attempts at VRML, and network video. Several teaching and research experiments conducted through these projects have demonstrated the viability and potential of using electronic, telecommunications, and videoconferencing technologies in collaborative design processes. Results of these VDS have been presented at conferences worldwide, explained in journal papers and published in Virtual Design Studio, edited by J. Wojtowicz, published by HKU Press.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	c7e9
authors	Maver, T.W.
year	2002
title	Predicting the Past, Remembering the Future
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 2-3
summary	Charlas Magistrales 2There never has been such an exciting moment in time in the extraordinary 30 year history of our subject area, as NOW,when the philosophical theoretical and practical issues of virtuality are taking centre stage.The PastThere have, of course, been other defining moments during these exciting 30 years:• the first algorithms for generating building layouts (circa 1965).• the first use of Computer graphics for building appraisal (circa 1966).• the first integrated package for building performance appraisal (circa 1972).• the first computer generated perspective drawings (circa 1973).• the first robust drafting systems (circa 1975).• the first dynamic energy models (circa 1982).• the first photorealistic colour imaging (circa 1986).• the first animations (circa 1988)• the first multimedia systems (circa 1995), and• the first convincing demonstrations of virtual reality (circa 1996).Whereas the CAAD community has been hugely inventive in the development of ICT applications to building design, it hasbeen woefully remiss in its attempts to evaluate the contribution of those developments to the quality of the built environmentor to the efficiency of the design process. In the absence of any real evidence, one can only conjecture regarding the realbenefits which fall, it is suggested, under the following headings:• Verisimilitude: The extraordinary quality of still and animated images of the formal qualities of the interiors and exteriorsof individual buildings and of whole neighborhoods must surely give great comfort to practitioners and their clients thatwhat is intended, formally, is what will be delivered, i.e. WYSIWYG - what you see is what you get.• Sustainability: The power of «first-principle» models of the dynamic energetic behaviour of buildings in response tochanging diurnal and seasonal conditions has the potential to save millions of dollars and dramatically to reduce thedamaging environmental pollution created by badly designed and managed buildings.• Productivity: CAD is now a multi-billion dollar business which offers design decision support systems which operate,effectively, across continents, time-zones, professions and companies.• Communication: Multi-media technology - cheap to deliver but high in value - is changing the way in which we canexplain and understand the past and, envisage and anticipate the future; virtual past and virtual future!MacromyopiaThe late John Lansdown offered the view, in his wonderfully prophetic way, that ...”the future will be just like the past, onlymore so...”So what can we expect the extraordinary trajectory of our subject area to be?To have any chance of being accurate we have to have an understanding of the phenomenon of macromyopia: thephenomenon exhibitted by society of greatly exaggerating the immediate short-term impact of new technologies (particularlythe information technologies) but, more importantly, seriously underestimating their sustained long-term impacts - socially,economically and intellectually . Examples of flawed predictions regarding the the future application of information technologiesinclude:• The British Government in 1880 declined to support the idea of a national telephonic system, backed by the argumentthat there were sufficient small boys in the countryside to run with messages.• Alexander Bell was modest enough to say that: «I am not boasting or exaggerating but I believe, one day, there will bea telephone in every American city».• Tom Watson, in 1943 said: «I think there is a world market for about 5 computers».• In 1977, Ken Olssop of Digital said: «There is no reason for any individuals to have a computer in their home».The FutureJust as the ascent of woman/man-kind can be attributed to her/his capacity to discover amplifiers of the modest humancapability, so we shall discover how best to exploit our most important amplifier - that of the intellect. The more we know themore we can figure; the more we can figure the more we understand; the more we understand the more we can appraise;the more we can appraise the more we can decide; the more we can decide the more we can act; the more we can act themore we can shape; and the more we can shape, the better the chance that we can leave for future generations a trulysustainable built environment which is fit-for-purpose, cost-beneficial, environmentally friendly and culturally significactCentral to this aspiration will be our understanding of the relationship between real and virtual worlds and how to moveeffortlessly between them. We need to be able to design, from within the virtual world, environments which may be real ormay remain virtual or, perhaps, be part real and part virtual.What is certain is that the next 30 years will be every bit as exciting and challenging as the first 30 years.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	aa13
authors	Oxman, Rivka
year	1996
title	Shared Design-Web-Space in Internet-Based Design
doi	https://doi.org/10.52842/conf.ecaade.1996.301
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 301-312
summary	The introduction of the computer into architectural studies has resulted in innovative pedagogical approaches to design education. In recent years we have employed a teaching approach in which the student models the formalization of design knowledge in a computerized environment and experiments with the formal processing of this knowledge in the generation of designs. Interacting with the computer in the generation of designs requires making design knowledge explicit and formalized. Knowledge modeling is an approach to design and education in which the designer models the design thinking involved in the making of the object. In this process appropriate computational technology is essential to support and enhance certain phenomena of reasoning. From the pedagogical point of view such computational design environment appear also to enhance design learning and performance through the capability gained in computer modelling. In this respect, there is an analogous impact on the potential of design knowledge environments which can support design performance in practice. In this paper we consider the Internetas a potential design knowledge environment. The nature of the Net as a medium for the representation, storage and accessing of design knowledge is presented and various research issues are introduced. The potential of this new medium as a resource for design learning, design practice and design collaboration derives from the attributes of the technology. We elaborate on the appropriateness of certain attributes of the medium as a potential design environment. Future possibilities of the Net as a shared design resource are proposed. Considerations of the Net as a collaboratively constructed design resource as well as a medium for collaborative design are introduced.
series	eCAADe
email
more	http://arrivka@technion.ac.il/~rivka
last changed	2022/06/07 08:00

_id	096e
authors	Papamichael, K., Porta, J.L., Chauvet, H., Collins, D., Trzcinski, T. , Thorpe, J. and Selkowitz, S.
year	1996
title	The Building Design Advisor
doi	https://doi.org/10.52842/conf.acadia.1996.085
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 85-97
summary	The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, schematic design phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to benefit from the capabilities of multiple tools. The BDA provides a graphical user interface that consists of two main elements: the Building Browser and the Decision Desktop. The Browser allows building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to any number of parameters addressed by the tools linked to the BDA. The BDA is implemented as a Windows-based application for personal computers. Its initial version is linked to a Schematic Graphic Editor (SGE), which allows designers to quickly and easily specify the geometric characteristics of building components and systems. For every object created in the SGE, the BDA supplies “smart” default values from a Prototypical Values Database (PVD) for all non-geometric parameters required as input to the analysis and visualization tools linked to the BDA. In addition to the SGE and the PVD, the initial version of the BDA is linked to a daylight analysis tool, an energy analysis tool, and a multimedia Case Studies Database (CSD). The next version of the BDA will be linked to additional tools, such as a photo-accurate rendering program and a cost analysis program. Future versions will address the whole building life-cycle and will be linked to construction, commissioning and building monitoring tools.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	ddssar9626
id	ddssar9626
authors	Sariyildiz, Sevil and Schwenck, Mathias
year	1996
title	Integrated Support Systems for Architectural Design
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Many software systems are used in the field of architectural design. On the other hand, we can state that there is a significant lack of integrated systems providing a general support for the designer during the whole design process from initiative till demolition. This research project deals with the development of such an integrated design support system. We consider a complete automation of architectural design as an unlikely proposition and undesirable for the architect. Therefore, the general objective is to give support to the architect to improve the quality and to increase the efficiency of the design process. So far there are different tools providing such functionality. Nevertheless, there are no appropriate tools for many of the sub-processes. Furthermore, the current state of available design software is characterised by a lack of integration of different tools. To overcome these two problems our research project involves the development of tools as well as it deals with the aspect of tool integration. We will give a general description of the support that software can offer to architects during the materialisation phase of design. We conclude that many different tools are needed which have to be integrated in an open, modular, distributed, user friendly and efficient environment.
series	DDSS
last changed	2003/08/07 16:36

_id	46a7
authors	Schumann, J., Strothotte, T., Raab, A. and Laser, S.
year	1996
title	Assessing the Effect of Non-Photorealistic Rendered Images in CAD PAPERS: Empirical Studies of Graphics and Visual Design
source	Proceedings of ACM CHI 96 Conference on Human Factors in Computing Systems 1996 v.1 pp. 35-41
summary	Recent work in computer graphics has resulted in new techniques for rendering so-called non-photorealistic images. While such features are now already appearing in commercially available software, little is known about the effect of non-photorealistic images on users and their usefulness in specific contexts. In this paper we report on an empirical study with 54 architects who compared the output of a sketch-renderer for producing pencil-like drawings with standard output of CAD systems for architectural designs. The results show that the different kinds of renditions actually have a very different effect on viewers and that non-photorealistic images actually do deserve their place in the repertoire of CAD systems.
keywords	Non-Photorealistic Rendering; Architectural Presentation; Preliminary Drafts; Sketches
series	other
last changed	2002/07/07 16:01

For more results click below: