Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 477

Reformat results as: short short into frame detailed detailed into frame

_id	5a8d
authors	Kensek, K., Noble, D., Schiler, M. and Setiadarma, E.
year	1996
title	Shading Mask: a teaching tool for sun shading devices
source	Automation in Construction 5 (3) (1996) pp. 219-231
summary	Sun shading devices provide an opportunity for the designer to control natural lighting, ventilation, and solar gain, all of which provide a benefit to the overall building performance. Through sun path diagrams and shading masks, some of the effects of these solar controls can be demonstrated graphically. This paper describes , a computer program written to help designers understand the basic theory of solar control; generate sun path diagrams; design overhead, side, and eggcrate shading devices; calculate solar angles and shading masks; and provide case studies of actual buildings.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	7135
authors	Arumi-Noe, F.
year	1996
title	Algorithm for the geometric construction of an optimum shading device
source	Automation in Construction 5 (3) (1996) pp. 211-217
summary	Given that there is a need to shade a window from the summer sun and also a need to expose it to the winter sun, this article describes an algorithm to design automatically a geometric construct that satisfies both requirements. The construct obtained represents the minimum solution to the simultaneous requirements. The window may be described by an arbitrary convex polygon and it may be oriented in any direction, and it may be placed at any chosen latitude. The algorithm consists of two sequential steps: first to find a winter solar funnel surface; and the second to clip the surface subject to the summer shading conditions. The article introduces the design problem, illustrates the results through two examples, outlines the logic of the algorithm and includes the derivation of the mathematical relations required to implement the algorithm. This work is part of the MUSES project, which is a long term research effort to integrate Energy Consciousness with Computer Graphics in Architectural Design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c71c
authors	Li, Jian Cheng
year	1996
title	Study on Computer-aided Design of Shading Device of a Building
doi	https://doi.org/10.52842/conf.caadria.1996.143
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 143-151
summary	The design of shading device is an important aspect of architectural heat-prevent design in sub-tropical climates of China. There is a large amount of calculation how to choose suitable style and size of shading device for various window in each exposure of a building, for the aim of both sheltering from sunlight indoors and preserving proper sun-shining time in a room. The solution of the calculation for the design of shading device is presented in this paper.
series	CAADRIA
last changed	2022/06/07 07:59

_id	1162
authors	Malkawi, Ali and Jabi, Wassim
year	1996
title	Integrating Shadow Casting Methodology and Thermal Simulation
source	Proceedings of the Solar ‘96 Conference. Asheville, North Carolina: American Solar Energy Society, 1996, pp. 271-276
summary	This paper describes an experiment that integrates shadow casting methodology and thermal simulation algorithms developed by the authors. The 3D shadow procedures use a polyhedral representation of solids within a Cartesian space that allows for accurate casting of shadows. The algorithm is also capable of calculating surface areas of polygonal shadows of any arbitrary shape and size. The thermal simulation algorithms – using the Transfer Function Method (TFM) – incorporate the shaded area calculations to better predict solar heat gain from glazing based on transmitted, absorbed, and conducted cooling loads. The paper describes the use of a 3D computer model to illustrate the impact of the pattern and area of shading on the visual and thermal properties of building apertures. The paper discusses the objectives of this experiment, the algorithms used, and their integration. Conclusions and findings are drawn.
keywords	Shadow Casting Algorithms Energey Thermal Simulation
series	other
email
last changed	2002/03/05 19:51

_id	ebd6
authors	Dobson, Adrian
year	1996
title	Teaching Architectural Composition Through the Medium of Virtual Reality Modelling
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 91-102
summary	This paper describes an experimental teaching programme to enable architectural students in the early years of their undergraduate study to explore their understanding of the principles of architectural composition, by the creation and experience of architectural form and space in simple virtual reality environments. Principles of architectural composition, based upon the ordering and organisation of typological architectural elements according to established rules of composition, are introduced to the students, through the study of recognised works of architectural design theory. Virtual reality modelling is then used as a tool by the students for the testing and exploration of these theoretical concepts. Compositional exercises involving the creation and manipulation of a family of architectural elements to create form and space within a three dimensional virtual reality environment are carried out using Superscape VRT, a PC based virtual reality modelling system. The project seeks to bring intuitive and immersive computer based design techniques directly into the context of design theory teaching and studio practice, at an early stage in the architectural education process.
series	other
last changed	1999/04/08 17:16

_id	8832
authors	MacCallum, C. and Hanna, R.
year	1996
title	DEFLECT: A Computer Aided Learning Package For Teaching Structural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.253
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 253-262
summary	The teaching of structures and its integration with design teaching has been seen as one of the major problems in design education in schools of architecture world-wide. A number of suggestions have been put forward to improve the quality of teaching in structures in architecture. These include the production of computer based learning materials, and the use of the computer as a ‘substitute’ tutor. This paper reports on a SHEFC funded project jointly carried out by the Department of Civil Engineering, University of Paisley, the Mackintosh School of Architecture, and Lamp Software. The project aims to build a computer-assisted learning package on the response of structures to load. The software will be used as an interactive teaching tool for both architectural and engineering students. The package has three levels: Beginners (Level 1), Intermediate (Level 2) and Advanced (Level 3). The first two levels have been completed after continuous feedback from both institutions. Level 1 is geared towards architectural and engineering students to help them understand structural behaviour of building components, such as deflection. Level 2 is a graphical editor that enables students to draw precisely the structure of their designs, investigate the deflection of structural members and identify areas of tension and compression. Level 3 is a design tool aimed at architectural and civil engineering students where they can design and analyse realistic structures by choosing structural members from a library, and specify materials and multiple loads. Prior to its final release, the software package was appraised by students from both institutions. Analysis of results from questionnaires revealed that students expressed a great deal of 'satisfaction' with many of its teaching and learning attributes. The outcome of this project will promote and enhance students’ understanding of the response of structures to load; it will also help students grasp the impact of varying building materials and cross sectional properties on the structural form.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	b42c
authors	Piccolotto, M. and Rio, O.
year	1996
title	A computer-based teaching tool for structural design
source	Automation in Construction 5 (3) (1996) pp. 233-242
summary	In this paper we will discuss the importance of computer-based simulation tools for the education of architects and civil engineers. We present our efforts to develop a program for the simulation of structures (CASDET). CASDET forms a microworld for planar structures. The program enables students to compose structures and to experiment interactively the effects of different geometry and load configurations. It tries to identify the proposed structure and controls its stability. Upon request of the student, it also processes displacements, internal forces (moments, shear forces, etc.) and reaction forces on supports. The students can then visualise the desired information by interacting directly with the structure or its members of interest. We present different methods with which students can visualise the results of their actions and discuss their implications in the educational context.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	sigradi2023_108
id	sigradi2023_108
authors	Passos, Aderson, Jorge, Luna, Cavalcante, Ana, Sampaio, Hugo, Moreira, Eugenio and Cardoso, Daniel
year	2023
title	Urban Morphology and Solar Incidence in Public Spaces - an Exploratory Correlation Analysis Through a CIM System
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1655–1666
summary	The walkability of open spaces has been highlighted in current discussions about the production of designed environments in urban contexts (Matan, 2011). To contribute to this theme, this work selects the environmental comfort of open spaces as its element of study. The production of urban space was investigated, specifically in regard to urban morphology, understanding that city design directly influences environmental comfort (Jacobs, 1996). This work addresses the geographic context of low latitudes, specifically in hot and humid climate zones of Brazil, and, in this context, according to NBR 15220 (national performance standards), shading is one of the main comfort strategies, so solar incidence was the approached environmental phenomenon. Thus, this work presents a digital system that performs exploratory analysis on the correlations between urban form indicators and environmental performance indicators, specifically solar incidence. The method consists of three steps: urban form modeling (1), indicator measurement (2) and correlation analysis (3). In the first stage, different spatial sections of a city in Brazil were represented in the digital environment (1). This work’s implementation instrument is based on a City Information Modeling framework (Beirao et al., 2012). Visual Programming Interface (VPI) and Geographic Information Systems (GIS) tools were used, in addition to a Relational Database Management System (RDBMS). Then, for each urban clipping, the values of morphological indicators and the incidence of solar radiation were measured (2). Based on the values of the indicators, an exploration of their correlation was carried out by statistical methods (3). The results of the correlation analysis and their correspondent scatter plots are presented. Finally, possible applications of the results for the creation of prescriptive urban planning systems are discussed, seeking to promote a sustainable urban environment.
keywords	Urban planning, Environmental comfort, Walkability, Urban morphology, Statistical methods.
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	0ec9
authors	Agranovich-Ponomareva. E., Litvinova, A. And Mickich, A.
year	1996
title	Architectural Computing in School and Real Designing
doi	https://doi.org/10.52842/conf.ecaade.1996.025
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 25-28
summary	The existing system of architectural education ( including computer ) as has shown practice has appeared not absolutly perfect. It not capable to dynamic changes, active introduction of a new engineering and computer technologies, to realization about of the inquiries of a modern time. It suggest of a way of search of new models of computer training. The computer education is represented by us as certain a universal system, which permits to solve the problem of arcitectural education at a higher level. The opportunities of computers and computer technologies at such approach are used as means of increase of efficiency teaching and training. The orientation goes on final result: a opportunity to generate of the creative decisions by learnees, based on attraction of received knowledge and use for their realization of arsenal of practical skills and skills. The system represents not only certain set of experiences elements, necessary and final result sufficient for achievement, but also quite certain interrelation between them. It means, that the knowledge from a initial rate " The Introduction in computer training" must be secured and transformed for utilization in special rates and through them- in practice. The functional nucleus of the software package of such universal system is under construction as opened, apparatus an independent system. A central part of a system is a database, the structure of which is uniform for all other modules and side of enclosures. The conceptual model of a system is under construction on principles structure idea, visualization, multimedia. The listed principles are realized in model so that to encourage the user to independent creative work.
series	eCAADe
last changed	2022/06/07 07:54

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.041
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	c19c
authors	Beliveau, Y.J.
year	1996
title	What can real-time positioning do for construction?
source	Automation in Construction 5 (2) (1996) pp. 79-89
summary	New technologies are now available that can rapidly measure three-dimensional coordinates of objects. The integration of these fast 3-D Real-time Position Measurement (D-RtPM) devices and CAD (3D-RtPM/CAD) technologies can be viewed as a better tool for surveyors or as a means to change the most fundamental concepts of the construction industry. 3D-RtPM/CAD is a better surveying tool; however, 3D-RtPM/CAD as the basis for fundamental change within the construction industry is the issue.There are several potential technologies that can provide real-time position measurement. This paper will limit presentation to two of these. The first is based on recent developments in Global Positioning Systems. The second is a new laser-based product, OdysseyTM (Odyssey is a trademark of Spatial Positioning Systems, Inc.). Odyssey received the NOVA award in March, 1995 because of its recognized performance enhancement to the construction industry. These positioning systems provide the capability for equipment and crafts people to view the project from a graphical representation in which they see their position interactively updated. Potential benefits to the construction industry are presented. The research needed achieving maximum benefits of these systems is also presented.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	eb87
authors	Bhavnani, S.K.
year	1996
title	How Architects Draw with Computers: A Cognitive Analysis of Real-World CAD Interactions
source	Carnegie Mellon University, School of Architecture and School of Computer Science
summary	New media throughout history have passed through a period of transition during which users and technologists took many years to understand and exploit the medium's potential. CAD appears to be passing through a similar period of transition; despite huge investments by vendors and users, CAD productivity remains difficult to achieve. To investigate if history can provide any insights into this problem, this thesis begins with an examination of well-known examples from history. The analysis revealed that, over time, users had developed efficient strategies which were based on powers and limitations of tools; delegation strategies exploited powers provided by tools, and circumvention strategies attempted to overcome their limitations. These insights on efficient strategies were used to investigate the CAD productivity problem based on four research questions: 1. How do architects currently use CAD systems to produce drawings? 2. What are the effects of current CAD usage on product and performance? 3. What are the possible causes of current CAD usage? 4. What are the capabilities of the CAD medium and how can they be used efficiently? The above four questions were addressed through the qualitative, quantitative, and cognitive analysis of data collected during an ethnographic study of architects working in their natural environment. The qualitative and quantitative analysis revealed that users missed many opportunities to use strategies that delegated iteration to the computer. The cognitive analysis revealed that missed opportunities to use such delegation strategies caused an increase in execution time, and an increase in errors many of which went undetected leading to the production of inaccurate drawings. These analyses pointed to plausible cognitive and contextual explanations for the inefficient use of CAD systems, and to a framework to identify and teach efficient CAD strategies. The above results were found to be neither unique to the CAD domain, nor to the office where the data were collected. The generality of these results motivated the identification of seven claims towards a general theory to explain and identify efficient strategies for a wide range of devices. This thesis contributes to the field of architecture by providing a detailed analysis of real-world CAD usage, and an approach to improve the performance of CAD users. The thesis also contributes to the field of human-computer interaction by demonstrating the generality of these results and by laying the framework for a general theory of efficient strategies which could be used to improve the performance of users of current and future computer applications.
series	thesis:PhD
email
last changed	2003/04/15 13:36

_id	4a71
authors	Byrne, Christine M.
year	1996
title	Water on tap : the use of virtual reality as an educational tool
source	College of Engineering, University of Washington
summary	A study was conducted that explored Virtual Reality (VR) as an educational tool. High school students created water molecules in an immersive virtual environment. They were tested on their knowledge of atomic and molecular structure before and after their VR experience. These results were compared to the test results of students who experienced other educational media in learning the same topic. The other media differed from VR in terms of immersion and interactivity. Interactivity was found to be significant, while immersion was found to be insignificant. Issues of training, world design, assessment, hardware resolution, and student population were suggested as possible reasons for immersion's lack of significance in this study.
keywords	Virtual Reality; Education; Computer Programs; Evaluation; Chemistry; Study and Teaching
series	thesis:PhD
last changed	2003/02/12 22:37

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	5e49
authors	Deering, Michael F.
year	1996
title	HoloSketch: A Virtual Reality Sketching/Animation Tool Special Issue on Virtual Reality Software and Technology
source	Transactions on Computer-Human Interaction 1995 v.2 n.3 pp. 220-238
summary	This article describes HoloSketch, a virtual reality-based 3D geometry creation and manipulation tool. HoloSketch is aimed at providing nonprogrammers with an easy-to-use 3D "What-You-See-Is-What-You-Get" environment. Using head-tracked stereo shutter glasses and a desktop CRT display configuration, virtual objects can be created with a 3D wand manipulator directly in front of the user, at very high accuracy and much more rapidly than with traditional 3D drawing systems. HoloSketch also supports simple animation and audio control for virtual objects. This article describes the functions of the HoloSketch system, as well as our experience so far with more-general issues of head-tracked stereo 3D user interface design.
keywords	Computer Graphics; Picture/Image Generation; Display Algorithms; Computer Graphics; Three-Dimensional Graphics and Realism; Human Factors; 3D Animation; 3D Graphics; Graphics Drawing Systems; Graphics Painting Systems; Man-Machine Interface; Virtual Reality
series	other
last changed	2002/07/07 16:01

_id	ec0e
authors	Engeli, M. and Kurmann, D.
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	H.J.P. Timmermans (ed.), Design and Decision Support Systems in Architecture and Urban Planning Conference, Vol. 1: Architecture Proceedings, pp. 132-142
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to experience rooms and 3D input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 3D model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	other
last changed	2003/04/23 15:50

_id	ddssar9609
id	ddssar9609
authors	Engeli, Maia and Kurmann, David
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to expe-rience rooms and 31) input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 31) model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	DDSS
last changed	2003/08/07 16:36

_id	db00
authors	Espina, Jane J.B.
year	2002
title	Base de datos de la arquitectura moderna de la ciudad de Maracaibo 1920-1990 [Database of the Modern Architecture of the City of Maracaibo 1920-1990]
source	SIGraDi 2002 - [Proceedings of the 6th Iberoamerican Congress of Digital Graphics] Caracas (Venezuela) 27-29 november 2002, pp. 133-139
summary	Bases de datos, Sistemas y Redes 134The purpose of this report is to present the achievements obtained in the use of the technologies of information andcommunication in the architecture, by means of the construction of a database to register the information on the modernarchitecture of the city of Maracaibo from 1920 until 1990, in reference to the constructions located in 5 of Julio, Sectorand to the most outstanding planners for its work, by means of the representation of the same ones in digital format.The objective of this investigation it was to elaborate a database for the registration of the information on the modernarchitecture in the period 1920-1990 of Maracaibo, by means of the design of an automated tool to organize the it datesrelated with the buildings, parcels and planners of the city. The investigation was carried out considering three methodologicalmoments: a) Gathering and classification of the information of the buildings and planners of the modern architectureto elaborate the databases, b) Design of the databases for the organization of the information and c) Design ofthe consultations, information, reports and the beginning menu. For the prosecution of the data files were generated inprograms attended by such computer as: AutoCAD R14 and 2000, Microsoft Word, Microsoft PowerPoint and MicrosoftAccess 2000, CorelDRAW V9.0 and Corel PHOTOPAINT V9.0.The investigation is related with the work developed in the class of Graphic Calculation II, belonging to the Departmentof Communication of the School of Architecture of the Faculty of Architecture and Design of The University of the Zulia(FADLUZ), carried out from the year 1999, using part of the obtained information of the works of the students generatedby means of the CAD systems for the representation in three dimensions of constructions with historical relevance in themodern architecture of Maracaibo, which are classified in the work of The Other City, generating different types ofisometric views, perspectives, representations photorealistics, plants and facades, among others.In what concerns to the thematic of this investigation, previous antecedents are ignored in our environment, and beingthe first time that incorporates the digital graph applied to the work carried out by the architects of “The Other City, thegenesis of the oil city of Maracaibo” carried out in the year 1994; of there the value of this research the field of thearchitecture and computer science. To point out that databases exist in the architecture field fits and of the design, alsoweb sites with information has more than enough architects and architecture works (Montagu, 1999).In The University of the Zulia, specifically in the Faculty of Architecture and Design, they have been carried out twoworks related with the thematic one of database, specifically in the years 1995 and 1996, in the first one a system wasdesigned to visualize, to classify and to analyze from the architectural point of view some historical buildings of Maracaiboand in the second an automated system of documental information was generated on the goods properties built insidethe urban area of Maracaibo. In the world environment it stands out the first database developed in Argentina, it is the database of the Modern andContemporary Architecture “Datarq 2000” elaborated by the Prof. Arturo Montagú of the University of Buenos Aires. The general objective of this work it was the use of new technologies for the prosecution in Architecture and Design (MONTAGU, Ob.cit). In the database, he intends to incorporate a complementary methodology and alternative of use of the informationthat habitually is used in the teaching of the architecture. When concluding this investigation, it was achieved: 1) analysis of projects of modern architecture, of which some form part of the historical patrimony of Maracaibo; 2) organized registrations of type text: historical, formal, space and technical data, and graph: you plant, facades, perspectives, pictures, among other, of the Moments of the Architecture of the Modernity in the city, general data and more excellent characteristics of the constructions, and general data of the Planners with their more important works, besides information on the parcels where the constructions are located, 3)construction in digital format and development of representations photorealistics of architecture projects already built. It is excellent to highlight the importance in the use of the Technologies of Information and Communication in this investigation, since it will allow to incorporate to the means digital part of the information of the modern architecturalconstructions that characterized the city of Maracaibo at the end of the XX century, and that in the last decades they have suffered changes, some of them have disappeared, destroying leaves of the modern historical patrimony of the city; therefore, the necessity arises of to register and to systematize in digital format the graphic information of those constructions. Also, to demonstrate the importance of the use of the computer and of the computer science in the representation and compression of the buildings of the modern architecture, to inclination texts, images, mapping, models in 3D and information organized in databases, and the relevance of the work from the pedagogic point of view,since it will be able to be used in the dictation of computer science classes and history in the teaching of the University studies of third level, allowing the learning with the use in new ways of transmission of the knowledge starting from the visual information on the part of the students in the elaboration of models in three dimensions or electronic scalemodels, also of the modern architecture and in a future to serve as support material for virtual recoveries of some buildings that at the present time they don’t exist or they are almost destroyed. In synthesis, the investigation will allow to know and to register the architecture of Maracaibo in this last decade, which arises under the parameters of the modernity and that through its organization and visualization in digital format, it will allow to the students, professors and interested in knowing it in a quicker and more efficient way, constituting a contribution to theteaching in the history area and calculation. Also, it can be of a lot of utility for the development of future investigation projects related with the thematic one and restoration of buildings of the modernity in Maracaibo.
keywords	database, digital format, modern architecture, model, mapping
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	e212
authors	Faltings, Boi and Sun, Kun
year	1996
title	FAMING: supporting innovative mechanism shape design
source	Computer-Aided Design, Vol. 28 (3) (1996) pp. 207-216
summary	A popular saying claims that `innovation is 1% inspiration and 99% perspiration'. In this paper, we present a method for automating most of the perspiration involved in innovative design. We restrict our attention toinnovative design processes which can be structured into three steps: discovery of a new technique, understanding it, and generalising it to fit the problem at hand. The method we developed automates theunderstanding and generalisation phases which involve most of the perspiration.We present the FAMING system which demonstrates the method for the design of part shapes in 2D elementary mechanisms, also called kinematic pairs. We believe that the results are generalisable to otherdomains with similar characteristics, in particular any problem where geometry plays an important role.
keywords	Intelligent CAD, Qualitative Reasoning, Case-Based Reasoning
series	journal paper
last changed	2003/05/15 21:33

For more results click below: