Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 482

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2004_paper11
id	ascaad2004_paper11
authors	Abdelfattah, Hesham Khairy and Ali A. Raouf
year	2004
title	No More Fear or Doubt: Electronic Architecture in Architectural Education
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combined with technologies to communicate images, data, and “live” action, now enable virtual dimensions of studio experience. Students no longer need to gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up—if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to support collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The challenge is to predict whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	6ec6
authors	Alsayyad, Nezar, Elliott, Ame and Kalay, Yehuda
year	1996
title	Narrative Models: A Database Approach to Modeling Medieval Cairo
doi	https://doi.org/10.52842/conf.acadia.1996.247
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 247-254
summary	This paper explores the use of three-dimensional simulations to investigate transformations of urban form in medieval Cairo, and lessons about using computers to support historical visualization. Our first attempt to create a single extremely detailed model of Cairo proved unworkable. From this experience we developed a database approach to organizing modeling projects of complex urban environments. The database consists of several complete models at different levels of abstraction. This approach has three advantages over the earlier one: the model is never viewed as incomplete, the framework supports both additive and subtractive chronological studies, and finally, the database is viewed as infinitely expandable. Using modeling software as a tool for inquiry into architectural history becomes more feasible with this new approach.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0f0e
authors	Andrzejewski, H. and Rostanski, K.
year	1996
title	Landscape Design Tool of Wide Ecological Aspect
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 7-12
summary	The article shows new tool prepared in two Technical Universities in Poland. The packet as a whole, of its current condition, is mainly elaborated by Henryk Andrzejewski at Faculty of Architecture of Wroclaw Technical University. Plant and vegetation units specifier is so far prepared by Krzysztof M. Rostahski and Mirostaw Rogula at Faculty of Architecture of Silesian Technical University. The packet allows to create the new text database of plants and to add the external data to the existing database, to change, to view and to search the data of the existing database of plants in accordance with the selection based on nongraphic search criteria. The packet finally will have 4 modules. One of them is .plant end vegetation units specifier', some details of that are shown here. New aspect is in contents of database which helps to estimate ecological influence of designed group of plants on our body and mind.
series	plCAD
last changed	2003/05/17 10:01

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1996.041
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	e29d
authors	Arvesen, Liv
year	1996
title	LIGHT AS LANGUAGE
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	With the unlimited supply of electric light our surroundings very easily may be illuminated too strongly. Too much light is unpleasant for our eyes, and a high level of light in many cases disturbs the conception of form. Just as in a forest, we need shadows, contrasts and variation when we compose with light. If we focus on the term compose, it is natural to conceive our environment as a wholeness. In fact, this is not only aesthetically important, it is true in a physical context. Inspired by old windows several similar examples have been built in the Trondheim Full-scale Laboratory where depth is obtained by constructing shelves on each side of the opening. When daylight is fading, indirect artificial light from above gradually lightens the window. The opening is perceived as a space of light both during the day and when it is dark outside. Another of the built examples at Trondheim University which will be presented, is a doctor's waitingroom. It is a case study of special interest because it often appears to be a neglected area. Let us start asking: What do we have in common when we are waiting to come in to a doctor? We are nervous and we feel sometimes miserable. Analysing the situation we understand the need for an interior that cares for our state of mind. The level of light is important in this situation. Light has to speak softly. Instead of the ordinary strong light in the middle of the ceiling, several spots are selected to lighten the small tables separating the seats. The separation is supposed to give a feeling of privacy. By the low row of reflected planes we experience an intimate and warming atmosphere in the room. A special place for children contributes to the total impression of calm. In this corner the inside of some shelves are lit by indirect light, an effect which puts emphasis on the small scale suitable for a child. And it also demonstrates the good results of variation. The light setting in this room shows how light is “caught” two different ways.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:34

_id	6c97
authors	Asanowicz, Aleksander
year	1996
title	Using the Computer in Analysis of Architectural Form
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 25-34
summary	One of the most important aspects of the designing process is: the design activity is usually conducted with incomplete information. Another important aspect of designing activity is: designing activity is usually based on past experience. As a matter of fact looking at designers in the early conceptual phases, one thing that appears clear is, instead starting from scratch, they spend a part of their time thinking about existing designing experience, reviewing the literature, and so on. That is why explicit representation of designing knowledge is needed if computers are to be used as the aid of design education and practice. Composition knowledge data base will be helpful during an architectural form analysis process as well. It makes possible to provide answers and explanations as well as allowing to view tutorials illustrating the particular problem. On its basic level such a program will present analysis of architectural objects and abstract forms based on subjective criteria. On its upper level allowing further exploration of various architectural composition attributes, as well as their influence on emotional- aesthetic judgements being formed during the process of analysis the architectural form.
series	other
last changed	1999/04/08 17:16

_id	a04a
authors	Bhavnani, S.K. and John, B.E.
year	1996
title	Exploring the Unrealized Potential of Computer-Aided Drafting
source	Proceedings of CHI'96 (1996), 332-339
summary	Despite huge investments by vendors and users, CAD productivity remains disappointing. Our analysis of real- world CAD usage shows that even after many years of experience, users tend to use suboptimal strategies to perform complex CAD tasks. Additionally, some of these strategies have a marked resemblance to manual drafting techniques. Although this phenomenon has been previously reported, this paper explores explanations for its causes and persistence. We argue that the strategic knowledge to use CAD effectively is neither defined nor explicitly taught. In the absence of a well-formed strategy, users often develop a synthetic mental model of CAD containing a mixture of manual and CAD methods. As these suboptimal strategies do not necessarily prevent users from producing clean, accurate drawings, the inefficiencies tend to remain unrecognized and users have little motivation to develop better strategies. To reverse this situation we recommend that the strategic knowledge to use CAD effectively should be made explicit and provided early in training. We use our analysis to begin the process of making this strategic knowledge explicit. We conclude by discussing the ramifications of this research in training as well as in the development of future computer aids for drawing and design.
keywords	Task Decomposition; Learning
series	other
email
last changed	2003/11/21 15:16

_id	b0d8
authors	Bourdakis, V.
year	1996
title	From CAAD to VRML: London Case Study
source	The 3rd UK VRSIG Conference Full Paper Proceedings, De Montfort University
summary	In this paper, the suitability and usability of VRML for urban modelling is discussed based on the experience gained by the creation of urban models of varying sizes, level of detail and use. Areas where the current VRML specification is failing to satisfy the needs of large-scale urban modelling are highlighted. Properties of a successful alternative or VRML3.0 specification are suggested and briefly discussed.
series	other
email
last changed	2003/11/21 15:16

_id	af53
authors	Boyer, E. and Mitgang, L.
year	1996
title	Building community: a new future for architecture education and practice
source	Carnegie Foundation for the Advancement of Teaching
summary	Internships, before and after graduation, are the most essential link connecting students to the world of practice. Yet, by all accounts, internship is perhaps the most troubled phase of the continuing education of architects. During this century, as architectural knowledge grew more complex, the apprenticeship system withered away and schools assumed much of the responsibility for preparing architects for practice. However, schools cannot do the whole job. It is widely acknowledged that certain kinds of technical and practical knowledge are best learned in the workplace itself, under the guidance of experienced professionals. All state accrediting boards require a minimum period of internship-usually about three years-before a person is eligible to take the licensing exam. The National Council of Architectural Registration Boards (NCARB) allows students to earn up to two years of work credit prior to acquisition of an accredited degree. The Intern Development Program (IDP), launched by NCARB and the American Institute of Architects in 1979, provides the framework for internship in some forty states. The program was designed to assure that interns receive adequate mentoring, that experiences are well-documented, and that employers and interns allocate enough time to a range of educational and vocational experiences to prepare students for eventual licensure. As the IDP Guidelines state, "The shift from school to office is not a transition from theory to pragmatism. It is a period when theory merges with pragmatism.... It's a time when you: apply your formal education to the daily realities of architectural practice; acquire comprehensive experience in basic practice areas; explore specialized areas of practice; develop professional judgment; continue your formal education in architecture; and refine your career goals." Whatever its accomplishments, however, we found broad consensus that the Intern Development Program has not, by itself, solved the problems of internship. Though we found mutually satisfying internship programs at several of the firms we visited or heard about around the country, at many others interns told us they were not receiving the continuing education and experience they needed. The truth is that architecture has serious, unsolved problems compared with other fields when it comes to supplying on-the-job learning experiences to induct students into the profession on a massive scale. Medicine has teaching hospitals. Beginning teachers work in actual classrooms, supported by school taxes. Law offices are, for the most part, in a better financial position to support young lawyers and pay them living wages. The architecture profession, by contrast, must support a required system of internship prior to licensure in an industry that has neither the financial resources of law or medicine, the stability and public support of teaching, nor a network of locations like hospitals or schools where education and practice can be seamlessly connected. And many employers acknowledged those problems. "The profession has all but undermined the traditional relationship between the profession and the academy," said Neil Frankel, FAIA, executive vice president of Perkins & Will, a multinational firm with offices in New York, Chicago, Washington, and London. "Historically, until the advent of the computer, the profession said, 'Okay, go to school, then we in the profession will teach you what the real world is like.' With the coming of the computer, the profession needed a skill that students had, and has left behind the other responsibilities." One intern told us she had been stuck for months doing relatively menial tasks such as toilet elevations. Another intern at a medium-sized firm told us he had been working sixty to seventy hours per week for a year and a half. "Then my wife had a baby and I 'slacked off' to fifty hours. The partner called me in and I got called on the carpet for not working hard enough." "The whole process of internship is being outmoded by economics," one frustrated intern told us. "There's not the time or the money. There's no conception of people being groomed for careers. The younger staff are chosen for their value as productive workers." "We just don't have the best structure here to use an intern's abilities to their best," said a Mississippi architect. "The people who come out of school are really problems. I lost patience with one intern who was demanding that I switch him to another section so that he could learn what he needed for his IDP. I told him, 'It's not my job to teach you. You are here to produce.'" What steps might help students gain more satisfying work opportunities, both during and after graduation?
series	other
last changed	2003/04/23 15:14

_id	4a71
authors	Byrne, Christine M.
year	1996
title	Water on tap : the use of virtual reality as an educational tool
source	College of Engineering, University of Washington
summary	A study was conducted that explored Virtual Reality (VR) as an educational tool. High school students created water molecules in an immersive virtual environment. They were tested on their knowledge of atomic and molecular structure before and after their VR experience. These results were compared to the test results of students who experienced other educational media in learning the same topic. The other media differed from VR in terms of immersion and interactivity. Interactivity was found to be significant, while immersion was found to be insignificant. Issues of training, world design, assessment, hardware resolution, and student population were suggested as possible reasons for immersion's lack of significance in this study.
keywords	Virtual Reality; Education; Computer Programs; Evaluation; Chemistry; Study and Teaching
series	thesis:PhD
last changed	2003/02/12 22:37

_id	88f9
authors	Carrara, G., Novembri, G., Zorgno, A.M., Brusasco, P.L.
year	1997
title	Virtual Studio of Design and Technology on Internet (I) - Educator's approach
doi	https://doi.org/10.52842/conf.ecaade.1997.x.n2w
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper presents a teaching experience involving students and professors from various universities, in Italy and abroad, which began in 1996 and is still on going. The Virtual Studios on the Internet (VSI) have some features in common with the Teaching Studios planned for the new programme of the faculties of Architecture in Italian universities. These are the definition of a common design theme, and the participation of disciplinary teachers. The greatest difference is in the modes of collaboration, which is achieved through information and communication technologies. The chief result of this is that the various work groups in different places can work and collaborate at the same time: the computer networks provide the means to express, communicate and share the design project.
keywords	CAAD, Teaching of architectural design, Shared virtual reality, Virtualdesign studio, Collective intelligence.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/lvi_i&ii/zorgno.html
last changed	2022/06/07 07:50

_id	413e
authors	Dalholm-Hornyansky, Elisabeth and Rydberg-Mitchell, Birgitta
year	1996
title	SPATIAL NAVIGATION IN VIRTUAL REALITY
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	For the past decade, we have carried out a number of participation projects using full-scale modeling as an aid for communication and design. We are currently participating in an interdisciplinary research project which aims to combine and compare various visualization methods and techniques, among others, full-scale modeling and virtual reality, in design processes with users. In this paper, we will discuss virtual reality as a design tool in light of previous experience with full-scale modeling and literature on cognitive psychology. We describe a minor explorative study, which was carried out to elucidate the answers to several crucial questions: Is realism in movement a condition for the perception of space or can it be achieved while moving through walls, floors and so forth? Does velocity of movement and reduced visual field have an impact on the perception of space? Are landmarks vital clues for spatial navigation and how do we reproduce them in virtual environments? Can “daylight“, color, material and texture facilitate navigation and are details, furnishings and people important objects of reference? How could contextual information clues, like views and surroundings, be added to facilitate orientation? Do we need our other senses to supplement the visual experience in virtual reality and what is the role of mental maps in spatial navigation?
keywords	Model Simulation, Real Environments
series	other
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2004/05/04 14:49

_id	b81d
authors	Davies, C. and Harrison, J.
year	1996
title	Osmose: Towards Broadening the Aesthetics of Virtual Reality
source	ACM Computer Graphics: Virtual Reality Volume 30, Number 4
summary	Osmose is an immersive virtual environment, produced by Softimage in 1994/95. One of the primary goals of Osmose was to push the expressive capabilities of existing 3D tools, to demonstrate that an alternative aesthetic and interactive sensibility is possible for real-time, interactive, 3D computer graphics. Osmose was created under the direction of Char Davies, the Director of Visual Research at Softimage. A former painter, as well as a creator of 3D computer graphic stills, Davies has a particular artistic vision which has driven the project. Davies has been striving for years to represent space as a luminous enveloping medium. This has led her from painting to 3D computer graphics, and finally into creating immersive virtual spaces. One of Davies' intentions for Osmose was to create a space that is "psychically innovating," one in which, to quote Bachelard, participants do not change "place," but change their own nature. Osmose was therefore designed to explore the potential of immersive virtual space to allow participants to shed their habitual ways of looking at (and behaving in) the world. By doing this, we hoped they would then emerge from the virtual world to experience the real world in a fresh way, reawakening a fundamental sense of their own "being-in-the-world." We hoped that this could be accomplished through the visual, aural and interactive aesthetic of the work.
series	journal paper
last changed	2003/04/23 15:50

_id	9613
authors	Day, A., Bourdakis, V. and Robson, J.
year	1996
title	Living with a Virtual City
source	Architectural Research Quarterly, Vol 2. pp. 84-91
summary	Computer models of entire cities are becoming increasingly common. The uses to which these models are put are varied and include the visualisation of proposed changes, the marketing of the facilities a city has to offer and the mapping of socio-economic data. Developments in the Internet mean that city models can be widely accessed and computer hardware and software have developed to the point where it is possible to both construct and view these models on personal computers. This paper discusses some issues relating to the construction and use of large urban models and draws upon the authors' experience of constructing the Bath computer model which remains one of the most detailed in the world.
series	journal paper
email
last changed	2003/04/23 15:50

_id	5e49
authors	Deering, Michael F.
year	1996
title	HoloSketch: A Virtual Reality Sketching/Animation Tool Special Issue on Virtual Reality Software and Technology
source	Transactions on Computer-Human Interaction 1995 v.2 n.3 pp. 220-238
summary	This article describes HoloSketch, a virtual reality-based 3D geometry creation and manipulation tool. HoloSketch is aimed at providing nonprogrammers with an easy-to-use 3D "What-You-See-Is-What-You-Get" environment. Using head-tracked stereo shutter glasses and a desktop CRT display configuration, virtual objects can be created with a 3D wand manipulator directly in front of the user, at very high accuracy and much more rapidly than with traditional 3D drawing systems. HoloSketch also supports simple animation and audio control for virtual objects. This article describes the functions of the HoloSketch system, as well as our experience so far with more-general issues of head-tracked stereo 3D user interface design.
keywords	Computer Graphics; Picture/Image Generation; Display Algorithms; Computer Graphics; Three-Dimensional Graphics and Realism; Human Factors; 3D Animation; 3D Graphics; Graphics Drawing Systems; Graphics Painting Systems; Man-Machine Interface; Virtual Reality
series	other
last changed	2002/07/07 16:01

_id	ddssar9604
id	ddssar9604
authors	Demir, Yueksel
year	1996
title	CAD Systems for early design phases or CAD systems for designers' early phases
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Most of the problems, related with the use of CAD systems are the results of some general principles; the philosophy that, those systems are based on. Therefore, mainly the relation between these principles and early design phase performance of CAD systems and designers are discussed in this paper. The circumstances of novice CAD user architects in Turkey is considered first. In formation of the research, the knowledge gained during my personal experience based on real cases from the university (education, research) and practice (design, consulting) is used. Beside this the results of a survey including a serious of interviews projecting the opinions of the architects is used. Vendors of commonly used CAD systems were interviewed. In this manner to answer the main question about the relation of "CAD" and "early design phase" the answers of some following questions and facts were investigated: What means CAD for architects? What are the main purposes of using CAD? Are CAD systems sufficient to be used in early design phases in terms of either hardware and / or software, or should we say thinkware?. The advantages and disadvantages of using CAD. The target user fact and its consequences (the difference between general purpose systems and the sophisticated architectural systems). Should we adapt to computerized way of thinking? Is 3D a basic feature? What are the education related problems of CAD? Is software integration problem solved? Modularity concept for CAD systems. What is the minimum time, and the budget required for a start? The illegal software use problem Complaints, demands, needs and thanks of architects? Simply, what do architects expect from CAD during design process and particularly in early phases (both of design and designer)? Do CAD systems match this?
keywords	CAD, Information Technology, Office Automation
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9605
id	ddssar9605
authors	Dijkstra, J., Roelen, W.A.H. and Timmermans, H.J.P.
year	1996
title	Conjoint measurement in virtual environment: a framework
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Conjoint analysis (also called stated preference analysis) involves the use of designed hypothetical choice situations to measure individuals' preferences and predict their choice in new situations. Conjoint experiments involve the design and analysis of hypothetical decision tasks. Alternatives are described by their main features, called attributes. Multiple hypothetical alternatives (product profiles) are generated and presented to respondents, who are requested to express their degree of preference for these profiles. Conjoint experiments have become a popular tool to model individual preferences and decision-making in a variety of research areas. Most studies of conjoint analysis have involved a verbal description of product profiles, although some studies have used a pictorial presentation of product profiles. This paper describes a framework for a conjoint analysis system in a virtual environment. Product profiles are generated in a virtual environment and respondents are requested to choose in that virtual environment the product profile they prefer. Advantages of a virtual environment in this area of research include 3D presentation, improved experience and the possibility to include measurable attributes such as time and sound. This framework is a first attempt to explore the possibilities of virtual reality systems in conjoint analysis.
series	DDSS
last changed	2003/08/07 16:36

_id	ebd6
authors	Dobson, Adrian
year	1996
title	Teaching Architectural Composition Through the Medium of Virtual Reality Modelling
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 91-102
summary	This paper describes an experimental teaching programme to enable architectural students in the early years of their undergraduate study to explore their understanding of the principles of architectural composition, by the creation and experience of architectural form and space in simple virtual reality environments. Principles of architectural composition, based upon the ordering and organisation of typological architectural elements according to established rules of composition, are introduced to the students, through the study of recognised works of architectural design theory. Virtual reality modelling is then used as a tool by the students for the testing and exploration of these theoretical concepts. Compositional exercises involving the creation and manipulation of a family of architectural elements to create form and space within a three dimensional virtual reality environment are carried out using Superscape VRT, a PC based virtual reality modelling system. The project seeks to bring intuitive and immersive computer based design techniques directly into the context of design theory teaching and studio practice, at an early stage in the architectural education process.
series	other
last changed	1999/04/08 17:16

_id	ec0e
authors	Engeli, M. and Kurmann, D.
year	1996
title	A Virtual Reality Design Environment with Intelligent Objects and Autonomous Agents
source	H.J.P. Timmermans (ed.), Design and Decision Support Systems in Architecture and Urban Planning Conference, Vol. 1: Architecture Proceedings, pp. 132-142
summary	New technological achievements and research results allow for the creation of innovative design tools for architects, that do not originate from paper-based paradigms but instead make optimised use of the present technology and programming concepts. The core of our system is comprised of an intuitive interactive modelling tool. It runs in a virtual reality set-up, where the user can use 3D glasses to experience rooms and 3D input devices to model in three dimensions. The interface is free from widget-like buttons or menus, so that the user is undisturbed when moving into the virtual world of the design. The system can also run in a distributed fashion, so that a number of users can look at and modify the same design. The 3D model can be generated in a sketch-like fashion using solids and voids, void modelling turns out to be very valuable for architectural design. The objects in this system can contain forms of intelligence to produce such behaviour as: falling because of gravity, collision avoidance, and autonomous motion. Interactive behaviour can also be assigned to the objects. Autonomous Agents are added to the system to enhance the designer support. These are agents that enhance the virtual environment, agents that take over tasks, and agents that help to test the design. The system shows new interface and interaction approaches that support the architectural design process intelligently.
series	other
last changed	2003/04/23 15:50

_id	a322
authors	Gavin, Lesley
year	1996
title	Practice and On -Line Learning
doi	https://doi.org/10.52842/conf.ecaade.1996.163
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 163-170
summary	In response to the growing need for the provision of continuing education for architects in practice, the Open University has been examining the possibilities of offering postgraduate courses in the Built Environment. The Open University is a unique institution within the UK, in that all of its 150,000 students are taught through supported open learning. The production of teaching material for distance learning on this scale has involved the exploration of various teaching and learning methods. The OU has had over 25 years experience of distance learning as such and although many of its current teaching methods lend themselves admirably to the development of computer based distance learning, there is still ample opportunity to exploit new technologies in teaching methods. Recent developments within the field of multimedia, video conferencing etc. lend themselves admirably to visually orientated subjects such as architecture. Over the last year the programme of development into the Built Environment has involved the production of 3 pilot modules in the areas of Conservation, Sustainability in Architecture & Planning, and in Construction Technology. These modules are currently being developed for production on CD-ROM, but with a long term view that they may be offered on-line. This paper will discuss how computer technology can be utilised in continuing education beyond schools of architecture and into a practice based environment.
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: