Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 494

Reformat results as: short short into frame detailed detailed into frame

_id	c204
authors	Aleksander Asanowicz
year	1996
title	Teaching and Learning - Full Brainwash
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 51-54
doi	https://doi.org/10.52842/conf.ecaade.1996.051
summary	We often speak of changes in design process due to an application of computers. But in my opinion we more often rather speak of lack of changes. Lets hope that some day we will be able to witness full integrity and compatibility of design process and tools applied in it. Quite possible such an integrity may occur in the cyberspace. Nevertheless before that could happen some changes within the teaching methods at faculties of architecture, where despite great numbers of computer equipment used, the students are still being taught as in the XIX century. In terms of achieved results it proves ineffective because application of chalk and blackboard only will always loose to new media, which allow visual perception of dinosaurs in Jurassic Park. Our civilisation is the iconographic one. And that is why teaching methods are about to change. An application of computer as simply a slide projector seems to be way too expensive. New media demands new process and new process demands new media. Lets hope that could be achieved in cyberspace as being a combination of: classic ways of teaching, hypertext, multimedia, virtual reality and a new teaching methodology (as used in Berlitz English School - full brainwash). At our faculty several years ago we experimentally undertook and applied an Integrated Design Teaching Method. A student during design process of an object simultaneously learnt all aspects and functions of the object being designing i.e.: its structure, piping and wiring, material cost and even historic evolution of its form and function. Unfortunately that concept was too extravagant as for the seventies in our reality. At present due to wide implementation of new media and tools in design process we come to consider reimplementation of IDTM again.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	bd19
authors	Harrison, Steve and Dourish, Paul
year	1996
title	Re-Place-ing Space: The Roles of Place and Space in Collaborative Systems Learning from Space and Place
source	Proceedings of ACM CSCW'96 Conferenc on Computer-Supported Cooperative Work 1996 p.10
summary	Many collaborative and communicative environments use notions of "space" and spatial organisation to facilitate and structure interaction. We argue that a focus on spatial models is misplaced. Drawing on understandings from architecture and urban design, as well as from our own research findings, we highlight the critical distinction between "space" and "place". While designers use spatial models to support interaction, we show how it is actually a notion of "place" which frames interactive behaviour. This leads us to re-evaluate spatial systems, and discuss how "place", rather than "space", can support CSCW design.
keywords	Space; Place; Media Space; Virtual Reality; MUDs; Metaphor
series	other
last changed	2002/07/07 16:01

_id	ddssar9618
id	ddssar9618
authors	Kanoglu, Alaattin
year	1996
title	Application of General Purpose Project Planning & Programming Software for Production Planning & Control in Plants which Produce Prefabricated Building Components
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The "open systems" in building prefabrication may be qualified more flexible to some extent compared to the closed ones and may use the tools and approaches used in industrial production areas for the es-timation of demand and production. As for the closed systems in particular, it is not possible for these systems to apply this kind of an approach. Their production must be based on absolutely assured de-mands and projects. Because of this, they need detailed projects and assembly schedules for produc-tion. As a result of this, their production modes can be qualified "custom-made" type and production planning functions must provide the demand values from the assembly schedules of contracted pro-jects. The problem can be solved by integrating the work schedules of the sites that are served by fac-tory. Integration of data on a computerized system will be preferable and it is possible to realize the model in two alternative ways. The first is developing a new conceptual model and convert it into a software and the second is developing an approach for customizing general purpose project planning and programming software for using them in production planning. The second solution is studied in the paper following this. The aims of this study are analyzing outstanding general purpose project planning & programming software from the point of view of requirements of production planning function and their customizability; comparing the requirements of the model designed for production planning and capabilities of general purpose planning software and developing the conceptual and practical dimensions and basic principals of the model for using the general purpose planning and programming software for production planning.
series	DDSS
last changed	2003/08/07 16:36

_id	06e1
authors	Keul, Alexander
year	1996
title	LOST IN SPACE? ARCHITECTURAL PSYCHOLOGY - PAST, PRESENT, FUTURE
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	A methodological review by Kaminski (1995) summed up five perspectives in environmental psychology - patterns of spatial distribution, everyday “jigsaw puzzles”, functional everyday action systems, sociocultural change and evolution of competence. Architectural psychology (named so at the Strathclyde conference 1969; Canter, 1973) as psychology of built environments is one leg of environmental psychology, the second one being psychology of environmental protection. Architectural psychology has come of age and passed its 25th birthday. Thus, a triangulation of its position, especially in Central Europe, seems interesting and necessary. A recent survey mainly on university projects in German-speaking countries (Kruse & Trimpin, 1995) found a marked decrease of studies in psychology of built environments. 1994, 25% of all projects were reported in this category, which in 1975 had made up 40% (Kruse, 1975). Guenther, in an unpublished survey of BDP (association of professional German psychologists) members, encountered only a handful active in architectural psychology - mostly part-time, not full-time. 1996, Austria has two full-time university specialists. The discrepancy between the general interest displayed by planners and a still low institutionalization is noticeable. How is the research situation? Using several standard research data banks, the author collected articles and book(chapter)s on architectural psychology in German- and English-language countries from 1990 to 1996. Studies on main architecture-psychology interface problems such as user needs, housing quality evaluations, participatory planning and spatial simulation / virtual reality did not outline an “old, settled” discipline, but rather the sketchy, random surface of a field “always starting anew”. E.g., discussions at the 1995 EAEA-Conference showed that several architectural simulation studies since 1973 caused no major impact on planner's opinions (Keul&Martens, 1996). “Re-inventions of the wheel” are caused by a lack of meetings (except this one!) and of interdisciplinary infrastructure in German-language countries (contrary to Sweden or the United States). Social pressures building up on architecture nowadays by inter-European competition, budget cuts and citizen activities for informed consent in most urban projects are a new challenge for planners to cooperate efficiently with social scientists. At Salzburg, the author currently manages the Corporate Design-process for the Chamber of Architecture, Division for Upper Austria and Salzburg. A “working group for architectural psychology” (Keul-Martens-Maderthaner) has been active since 1994.
keywords	Model Simulation, Real Environments
series	EAEA
type	normal paper
email
more	http://info.tuwien.ac.at/efa/
last changed	2005/09/09 10:43

_id	57c7
authors	Mathew, Paul
year	1996
title	Integrated Energy Modeling for Computational Building Design Assistance
source	Carnegie Mellon University, Department of Architecture
summary	Insights into the importance of energy modeling in building design have not yet resulted in the sufficient and systematic use of modeling tools in practice. In recent years, there has been considerable discussion on the limitations of simulation tools, and there is a noteworthy consensus as to the nature of the contributing factors (material and time implications, problematic user-interfaces, inefficient data communication structures, poor integration with CAD systems, absence of 'active' design support). This thesis deals with three research questions that are especially pertinent to the quest for active, multi-aspect design and simulation environments: (1) The appropriateness and feasibility of a methodologically consistent performance modeling approach through the entire design process. (2) Strategies for a structurally 'seamless' containment of performance simulation within a computational design environment. (3) Technologies to facilitate dynamic and interactive performance-to-design mapping. At a paradigmatic level, this thesis critically examines the existing responses to each of these questions, and proposes alternative computational frameworks and technologies to overcome some of the system-immanent ('endogenous') limitations of the existing approaches. At an operational level, this thesis demonstrates the proposed solutions by implementing an active thermal simulation module (NOD
series	thesis:PhD
email
last changed	2003/04/15 02:37

_id	acadia07_284
id	acadia07_284
authors	Robinson, Kirsten; Gorbet, Robert; Beesley, Philip
year	2007
title	Evolving Cooperative Behaviour in a Reflexive Membrane
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 284-293
doi	https://doi.org/10.52842/conf.acadia.2007.284
summary	This paper describes the integration of machine intelligence into an immersive architectural sculpture that interacts dynamically with users and the environment. The system is conceived to function as an architectural envelope that might transfer air using a distributed array of components. The sculpture includes a large array of interconnected miniature structural and kinetic elements, each with local sensing, actuation, and machine intelligence. We demonstrate a model in which these autonomous, interconnected agents develop cooperative behaviour to maximize airflow. Agents have access to sensory data about their local environment and ‘learn’ to move air through the working of a genetic algorithm. Introducing distributed and responsive machine intelligence builds on work done on evolving embodied intelligence (Floreano et al. 2004) and architectural ‘geotextile’ sculptures by Philip Beesley and collaborators (Beesley et al. 1996-2006). The paper contributes to the general field of interactive art by demonstrating an application of machine intelligence as a design method. The objective is the development of coherent distributed kinetic building envelopes with environmental control functions. A cultural context is included, discussing dynamic paradigms in responsive architecture.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 08:00

_id	a9ca
authors	Abadi Abbo, Isaac
year	1996
title	EFFECTIVENESS OF MODELS
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	Architects use many types of models to simulate space either in their design process or as final specifications for building them. These models have been proved useful or effective for specific purposes. This paper evaluates architectural models in terms of five effectiveness components: time of development, cost, complexity, variables simulated and ecological validity. This series of models, used regularly in architecture, are analysed to finally produce a matrix that shows the effectiveness of the different models for specific purposes in architectural design, research and education. Special emphasis is given to three specific models: 1/10 scale, full-scale and computer generated.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
more	http://info.tuwien.ac.at/efa/
last changed	2016/02/17 13:47

_id	ascaad2004_paper11
id	ascaad2004_paper11
authors	Abdelfattah, Hesham Khairy and Ali A. Raouf
year	2004
title	No More Fear or Doubt: Electronic Architecture in Architectural Education
source	eDesign in Architecture: ASCAAD's First International Conference on Computer Aided Architectural Design, 7-9 December 2004, KFUPM, Saudi Arabia
summary	Operating electronic and Internet worked tools for Architectural education is an important, and merely a prerequisite step toward creating powerful tele-collabortion and tele-research in our Architectural studios. The design studio, as physical place and pedagogical method, is the core of architectural education. The Carnegie Endowment report on architectural education, published in 1996, identified a comparably central role for studios in schools today. Advances in CAD and visualization, combined with technologies to communicate images, data, and “live” action, now enable virtual dimensions of studio experience. Students no longer need to gather at the same time and place to tackle the same design problem. Critics can comment over the network or by e-mail, and distinguished jurors can make virtual visits without being in the same room as the pin-up—if there is a pin-up (or a room). Virtual design studios (VDS) have the potential to support collaboration over competition, diversify student experiences, and redistribute the intellectual resources of architectural education across geographic and socioeconomic divisions. The challenge is to predict whether VDS will isolate students from a sense of place and materiality, or if it will provide future architects the tools to reconcile communication environments and physical space.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	63e6
authors	Af Klercker, Jonas
year	1996
title	Visualisation for Clients - One Example of Educating CAAD for Practice
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 17-24
doi	https://doi.org/10.52842/conf.ecaade.1996.017
summary	During the spring term 1996, 13 students of the 3rd and 4th year at the School of Architecture at Lund University had the opportunity to make a one semester CAAD project. 11 students chose the individual exercise to use computer media for developing a small architectural design in interaction with a client. The focus was set more on visualization and the process of communicating ideas, feelings and practical solutions between architect and client and visa versa rather than concentrated on the final product. This paper describes the process of the project and the reflections of the participants. It will discuss problems from the teachers point of view.
series	eCAADe
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:54

_id	aa7c
authors	Amirante, M. Isabella and Burattini, Ernesto
year	1996
title	Automatic Procedures for Bio-Climatic Control
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 29-40
doi	https://doi.org/10.52842/conf.ecaade.1996.029
summary	The experiences illustrated here are related to the new regulation of teaching architecture in Italy and these ones in particular have been concentrated on the technological aspects of teaching architecture. We can consider the evolution of the architect from the individual operator to the manager multi- disciplinary aspects of the building process ( building process manager) as a reality today. Information technology, specifically applied to bio-climatic architecture and environmental control, can be of great importance for this professional role, and for this reason it is very useful to include these topics at the beginning the teaching design process. This paper describes a particular approach to bio-climatic problems of the architectural project. An experimental course has been performed by the second year students of the "Laboratorio di Construzione dell' Architettura", at the School of Architecture of the Second University of Naples, in Aversa. Analysing old and new buildings, they used some flow charts for the evaluation and representation of energetic behaviour of buildings regarding their climatic and geographical environment. In the flow charts the decisions are represented by boxes that allow to determine "rightness index" related to: morphological characters of the site and environment, typology and particular organisation of the inside spaces, shape of building, technological solution of the building "skin". The navigation through the decision boxes is made with simple options like; "winds: protected or exposed site", "shape of building; free, close or cross plane", "presence of trees on the south,; yes or not",; it shows the students the bio-climatic quality of the building and, through numeric value assigned to each option, determines the "weight" of its climatic comfort.
series	eCAADe
last changed	2022/06/07 07:54

_id	8ded
authors	Anders, Peter
year	1996
title	Envisioning Cyberspace: The Design of On-Line Communities
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 55-67
doi	https://doi.org/10.52842/conf.acadia.1996.055
summary	The development of the World Wide Web into an active, visual social environment poses unique opportunities for the design professions. Multi-user Domains, social meeting places in cyberspace, are mostly text-based virtual realities which use spatial references to set the stage for social interaction. Over the past year design students at the New Jersey Institute of Technology School of Architecture have investigated several text-based domains. In the course of their work, they envisioned and graphically portrayed these environments as immersive virtual realities through the use of computer animation. Their studies addressed issues ranging from the nature of symbolic motion to social/political structures of these domains.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0f0e
authors	Andrzejewski, H. and Rostanski, K.
year	1996
title	Landscape Design Tool of Wide Ecological Aspect
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 7-12
summary	The article shows new tool prepared in two Technical Universities in Poland. The packet as a whole, of its current condition, is mainly elaborated by Henryk Andrzejewski at Faculty of Architecture of Wroclaw Technical University. Plant and vegetation units specifier is so far prepared by Krzysztof M. Rostahski and Mirostaw Rogula at Faculty of Architecture of Silesian Technical University. The packet allows to create the new text database of plants and to add the external data to the existing database, to change, to view and to search the data of the existing database of plants in accordance with the selection based on nongraphic search criteria. The packet finally will have 4 modules. One of them is .plant end vegetation units specifier', some details of that are shown here. New aspect is in contents of database which helps to estimate ecological influence of designed group of plants on our body and mind.
series	plCAD
last changed	2003/05/17 10:01

_id	cf57
authors	Anumba, C.J.
year	1996
title	Functional Integration in CAD Systems
source	Advances in Engineering Software, 25, 103-109
summary	This paper examines the issue of integration in CAD systems and argues that for integration to be effective, it must address the functional aspects of a CAD system. It discusses the need for integrated systems and, within a structural engineering context, identifies several facets of integration that should be targeted. These include 2-D drafting and 3-D modelling, graphical and non-graphical design information, the CAD data structure and its user interface, as well as integration of the drafting function with other engineering applications. Means of achieving these levels of integration are briefly discussed and a prognosis for the future development of integrated systems explored. Particular attention is paid to the emergence (and potential role) of `product models' which seek to encapsulate the full range of data elements required to define completely an engineering artefact.
series	journal paper
last changed	2003/04/23 15:14

_id	ddssup9601
id	ddssup9601
authors	Aoke, Yoshitsugu and Muraoka, Naoto
year	1996
title	An optimization method of the facility location by genetic algorithm
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	In planning of community-facilities, it is important to decide the facility location to provide the effective service for residents. The behavior of residents using the facility and the evaluation methods of the location have been studied. But, finding the optimum location is very hard in actual planning because the volume of calculation depends on the number of feasible locating points of facilities. To conquer the difficulty of searching the optimum location, we propose an optimization method using Genetic Algorithm. An alternative of location is expressed by a chromosome. Each chromosome consists of genes, and each gene expresses a located zone of the facility. We gave definitions of genetic procedures; crossing-over, mutation and selection. Alternatives of the facility location are generated by these genetic procedures like as life evolution. For each alternative, the behaviors of users are estimated by a spatial-interaction model, and the facilities that residents in each place choose are determined. The effectiveness of the location is measured by a total sum of distances between the facility and the user. After the confirmation of the effectiveness of our method by applying on ideal example problems, we applied it on the actual problem in Japanese town. By this method we could find the optimum location in about one-third time and effort as compared with the ordinal method.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup9602
id	ddssup9602
authors	Arentze, T.A., Borgers, A.W.J. and Harry J.P.
year	1996
title	A knowledge-based model for developing location strategies in a DSS for retail planning
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Most DSS for retail planning are based on impact assessment models to support the evaluation of plan scenario's. This paper introduces a complementary knowledge-based model to support also the earlier stage of formulating plan scenario's. An analysis of the retail planning problem reveals the main lines of the strategies adopted by most Dutch planners and retailers to achieve their goals. A basic strategy that seems to be appropriate in most problem contexts is formulated in the form of a set of decision tables. Each decision table or system of decision tables specifies for a problem area decision rules to identify and analyse problems and to formulate possible actions. The model is implemented in a DSS where it is used in combination with quantitative impact assessment models. A case study in the area of daily good facilities demonstrates the approach. The major conclusion is that the knowledge-based approach and in particular the decision table technique provides interesting possibilities to implement planning task structures in a DSS environment.
series	DDSS
last changed	2003/11/21 15:16

_id	452d
authors	Arlati, E., Bottelli, V. and Fogh, C.
year	1996
title	Applying CBR to the Teaching of Architectural Design
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 41-50
doi	https://doi.org/10.52842/conf.ecaade.1996.041
summary	This paper presents an approach to the analysis and description of the nature of process knowledge in architectural design, the development of a conceptual model for Galathea, a case-based navigation tool for its support, and the application of this theoretical foundation to the teaching of design to a group of about 100 second-year architecture students. Design is assumed as a globally coherent information, memory and experience-intensive process in which professional skill is the capability to govern a large number of continually evolving variables in the direction of desired change. This viewpoint on design has guided the development of Galathea, the model of a tool aimed at describing architectural design through the description, mapping and management of the complete decision-making path of projects by means of the dynamic representation of the relationship between goals, constraints and the decisions/actions adopted at specific nodes and through the creation of a case-base aimed at the storage, retrieval and adaptation of relevant design moves in similar project contexts. This conceptual model is applied to educational activity at the faculty of Architecture of Milan, with the aim of teaching how to govern a project from the outset considering it as an evolving but coherent map of design moves, which allow the adoption of the correct decisions involving the most disparate types of information, experience and memory, and which altogether conduct to the desired goal. The resolution paths of the students, all applied to the same architecture problem, result in a design move case-base, the further utilisation and interest of which is open to collegial discussion.
keywords	knowledge-based design; case-based reasoning; design process control, design moves
series	eCAADe
email
last changed	2022/06/07 07:54

_id	63a7
id	63a7
authors	Ataman, Osman and Lonnman, Bruce
year	1996
title	Introduction to Concept and Form in Architecture: An Experimental Design Studio Using the Digital Media
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 3-9
doi	https://doi.org/10.52842/conf.acadia.1996.003
summary	This paper describes the use of digital media in a first year undergraduate architectural design studio. It attempts to address the importance of developing a design process that is redefined by the use of computing, integrating concept and perception. Furthermore, it describes the theoretical foundations and quasi-experiments of a series of exercises developed for beginning design students.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	ddssup9603
id	ddssup9603
authors	Bach, Boudewijn and MacGillivray, Trina
year	1996
title	Semi-manual design support for increasing railwaystation catchment & sustainable traffic routing
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The shape ('configuration'), location and direction of the pattern of potential trips by foot or bicycle can help decision makers and designers:- the shape of such a pattern informs about the potential size of a traffic calming area(such as 30Km-zoning),- the location of such a pattern refers to the user-groups and specific destinations that a urban network should bring in safe reach for dictated groups,- the direction of such a pattern, together with shape and location, points to the best routing to raise the Sustainable Traffic Modal Split or to improve the reach of destinations like a railway-station.The patters can be generated from zip-code's of user-groups with obvious and daily destinations (school-children, rail-passengers). The next step confronts the theoretical pattern with the layout of streets and the traffic flow, mapping or listing (potential) confrontations between cars and the non-motorised modes, a basis for economical investment in traffic-safety.A design can 'model' the analysed pattern(s) to a economic, direct and safe base (cycle or pedestrian) network. In co-operation, the Dutch the traffic consultant "Verkeersadviesbureau Diepens & Okkema" in Delft, The Netherlands and the Faculty of Architecture, Delft University of Technology, in Delft, The Netherlands, develloped the semi-manual design & decision support system "STAR-Analysis"
series	DDSS
last changed	2003/11/21 15:16

_id	328d
authors	Bassanino, May Nahab and Brown, Andre
year	1999
title	Computer Generated Architectural Images: A Comparative Study
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 552-556
doi	https://doi.org/10.52842/conf.ecaade.1999.552
summary	This work is part of a long term research programme (Brown and Horton, 1992; Brown and Nahab, 1996; Bassanino, 1999) in which tests and studies have been carried out on various groups of people to investigate their reaction to, and interpretation of different forms of architectural representation. In the work described here a range of architectural schemes were presented using particular representational techniques and media. An experiment was then undertaken on two different groups; architects and lay people. They were presented with a number of schemes displayed using the various techniques and media. The responses are summarised and some comments are made on the effect of computers on perceiving architecture and on communicating architectural ideas arising from an analysis of the responses.
keywords	Subject, Image Type, Presentation Technique, Medium, SD Scales, Factors
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: