Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 475

Reformat results as: short short into frame detailed detailed into frame

_id	5e49
authors	Deering, Michael F.
year	1996
title	HoloSketch: A Virtual Reality Sketching/Animation Tool Special Issue on Virtual Reality Software and Technology
source	Transactions on Computer-Human Interaction 1995 v.2 n.3 pp. 220-238
summary	This article describes HoloSketch, a virtual reality-based 3D geometry creation and manipulation tool. HoloSketch is aimed at providing nonprogrammers with an easy-to-use 3D "What-You-See-Is-What-You-Get" environment. Using head-tracked stereo shutter glasses and a desktop CRT display configuration, virtual objects can be created with a 3D wand manipulator directly in front of the user, at very high accuracy and much more rapidly than with traditional 3D drawing systems. HoloSketch also supports simple animation and audio control for virtual objects. This article describes the functions of the HoloSketch system, as well as our experience so far with more-general issues of head-tracked stereo 3D user interface design.
keywords	Computer Graphics; Picture/Image Generation; Display Algorithms; Computer Graphics; Three-Dimensional Graphics and Realism; Human Factors; 3D Animation; 3D Graphics; Graphics Drawing Systems; Graphics Painting Systems; Man-Machine Interface; Virtual Reality
series	other
last changed	2002/07/07 16:01

_id	656d
authors	Donath , Dirk and Regenbrecht, Holger
year	1996
title	Using Virtual Reality Aided Design Techniques for Three-dimensional Architectural Sketching
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 199-212
doi	https://doi.org/10.52842/conf.acadia.1996.199
summary	With this paper we would like to introduce a system which supports the early phases of the architectural design process. The system consists of two main components: the software solution "voxDesign" and the physical environment "platform". Our aims are: to formulate, develop, and evaluate an architectural design system through the use of VR (virtual reality) space. The exploration and development of design intentions is supplemented by a new method of three dimensional sketching. In the second part of this paper we will show how these components were used to train students in architecture and design at our university. Parts of this paper were published to the academic public at "Designing Digital Space". (Regenbrecht 1996)
keywords	Virtual Reality, Architectural Design, Human-computer interfaces, Design Techniques
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2004_043
id	sigradi2004_043
authors	Celso Pereira Guimarães; Gerson G. Cunha; Luis Landau
year	2004
title	Sistema de informação e orientação para ambientes públicos em VR - O caso do hu da ufrj um projeto sinalético [Information and Orientation System for Public Environments in VR - The Case of UFRJ University Hospital, a Communication Design Project]
source	SIGraDi 2004 - [Proceedings of the 8th Iberoamerican Congress of Digital Graphics] Porte Alegre - Brasil 10-12 november 2004
summary	Considering Levy.s (1996) thought that qualifies the cyberspace as an anbient par excellence and susceptible to be transformed and explored [1], our work intends to introduce through the simulation in VR, the use of that anbient as support of conception projetual and of the analysis and verification of the efficiency of the proposal of the System of Comunication Design implanted at the Hospital Clementino Fraga Filho of the Federal University of Rio de Janeiro (HU). [2]
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	ddssup9617
id	ddssup9617
authors	Sidjanin, Predrag
year	1996
title	A computer simulation model of the TU district of Delft with use of the GIS and VR
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	One of the big problems for GIS users is a luck of such an visual presentation of data which will easily transform them into a spatial image. Existing systems based on Human-Computer-Interfaces (Ha) have limitations and for this reason it is necessary to discover new explicit way of spatial data presentation and manipulation. Virtual Reality technology with its specificity and characteristics based on spatial displaying and multisensory interactivity, give to VR users a new promising possibility to solve GIS limitations. This research is an exploration of integration of GIS and yR. VR is a kind of production of a simulation of a real world, and GIS-databases contain data that describe this world, therefore a success of combination of both technologies is very probable. This research shows possibilities for creating a virtual GIS world in which is possible to handle, explore, analyse and present spatial data by free navigation through a virtual model. The virtual model of Delft University of Technology's Campus presents Virtual Reality as a new type of 3D interface for GIS and demonstrates some basic GIS functions in virtual environment. It has been created by importing of GIS databases into VR system. Virtual model is based on geometric and attributive data. GIS functionality is enabled by 3D interface objects, that symbolically and semantically represents GIS functions. Their use should initiate intuitive users action. This application combines spatial data, user interface, text, sound, thematic data and virtual hypertext. Virtual model enables the use of quantitative and qualitative information. The results of the research can be implemented to support design strategies ax! decision making in the field of physical and urban planning.
series	DDSS
last changed	2003/08/07 16:36

_id	0ec9
authors	Agranovich-Ponomareva. E., Litvinova, A. And Mickich, A.
year	1996
title	Architectural Computing in School and Real Designing
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 25-28
doi	https://doi.org/10.52842/conf.ecaade.1996.025
summary	The existing system of architectural education ( including computer ) as has shown practice has appeared not absolutly perfect. It not capable to dynamic changes, active introduction of a new engineering and computer technologies, to realization about of the inquiries of a modern time. It suggest of a way of search of new models of computer training. The computer education is represented by us as certain a universal system, which permits to solve the problem of arcitectural education at a higher level. The opportunities of computers and computer technologies at such approach are used as means of increase of efficiency teaching and training. The orientation goes on final result: a opportunity to generate of the creative decisions by learnees, based on attraction of received knowledge and use for their realization of arsenal of practical skills and skills. The system represents not only certain set of experiences elements, necessary and final result sufficient for achievement, but also quite certain interrelation between them. It means, that the knowledge from a initial rate " The Introduction in computer training" must be secured and transformed for utilization in special rates and through them- in practice. The functional nucleus of the software package of such universal system is under construction as opened, apparatus an independent system. A central part of a system is a database, the structure of which is uniform for all other modules and side of enclosures. The conceptual model of a system is under construction on principles structure idea, visualization, multimedia. The listed principles are realized in model so that to encourage the user to independent creative work.
series	eCAADe
last changed	2022/06/07 07:54

_id	1fb3
authors	Akin, O., Cumming, M., Shealey, M. and Tuncer, B.
year	1997
title	An electronic design assistance tool for case-based representation of designs
source	Automation in Construction 6 (4) (1997) pp. 265-274
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case-based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case-base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	4cda
authors	Akin, O., Cumming, M. , Shealey, M. and Tuncer, B.
year	1996
title	An Electronic Design Assistance Tool for Case Based Representation of Designs
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 123-132
doi	https://doi.org/10.52842/conf.acadia.1996.123
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996, and will be used in future studios, as well.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	31f5
authors	Alfares, M. and Seireg, A.
year	1996
title	An integrated system for computer-aided design and construction of reinforced concrete buildings using modular forms
source	Automation in Construction 5 (4) (1996) pp. 323-341
summary	The study reported in this paper investigates the feasibility of automating the on-site construction of reinforced concrete residential buildings. The basic construction tasks are identified, analyzed and modified with a view towards potential for automation. Emphasis is placed on developing modular forms that facilitate automation. The majority of work in the field of construction robotics has focused on the adaptation of existing industrial robots to automate traditional construction processes. This paper outlines a computer-aided construction system approach specially suited for integrating design and implementation by on-site robots. A Computer-Integrated Construction (CIC) system, similar to CIM, is developed that includes a CIC data-base, a construction design system, a construction production/process planning system, and a robotics execution system. This approach is intended to minimize the redesign effort as well as the need for on-site manual work.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	cf57
authors	Anumba, C.J.
year	1996
title	Functional Integration in CAD Systems
source	Advances in Engineering Software, 25, 103-109
summary	This paper examines the issue of integration in CAD systems and argues that for integration to be effective, it must address the functional aspects of a CAD system. It discusses the need for integrated systems and, within a structural engineering context, identifies several facets of integration that should be targeted. These include 2-D drafting and 3-D modelling, graphical and non-graphical design information, the CAD data structure and its user interface, as well as integration of the drafting function with other engineering applications. Means of achieving these levels of integration are briefly discussed and a prognosis for the future development of integrated systems explored. Particular attention is paid to the emergence (and potential role) of `product models' which seek to encapsulate the full range of data elements required to define completely an engineering artefact.
series	journal paper
last changed	2003/04/23 15:14

_id	af94
authors	Anumba, C.J.
year	1996
title	Data structures and DBMS for computer-aided design systems
source	Advances in Engineering Software, 25(2/3), 123-129
summary	The structures for the storage of data in CAD systems influence to a large extent the effectiveness of the system. This paper reviews the wide range of data structures and database management systems (DBMS) available for structuring CAD data. Examples of basic data types are drawn from the MODULA-2 language. The relationship between these basic data types, their composite structures and the classical data models (on which many DBMS are based) is discussed, and the limitations of existing DBMS in modelling CAD data highlighted. A set of requirements for CAD database management systems is drawn up and the emerging role of product models (which seek to encapsulate the totality of data elements required to define fully an engineering artefact) is explored.
series	journal paper
last changed	2003/04/23 15:14

_id	ddssup9602
id	ddssup9602
authors	Arentze, T.A., Borgers, A.W.J. and Harry J.P.
year	1996
title	A knowledge-based model for developing location strategies in a DSS for retail planning
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Most DSS for retail planning are based on impact assessment models to support the evaluation of plan scenario's. This paper introduces a complementary knowledge-based model to support also the earlier stage of formulating plan scenario's. An analysis of the retail planning problem reveals the main lines of the strategies adopted by most Dutch planners and retailers to achieve their goals. A basic strategy that seems to be appropriate in most problem contexts is formulated in the form of a set of decision tables. Each decision table or system of decision tables specifies for a problem area decision rules to identify and analyse problems and to formulate possible actions. The model is implemented in a DSS where it is used in combination with quantitative impact assessment models. A case study in the area of daily good facilities demonstrates the approach. The major conclusion is that the knowledge-based approach and in particular the decision table technique provides interesting possibilities to implement planning task structures in a DSS environment.
series	DDSS
last changed	2003/11/21 15:16

_id	ddssup9603
id	ddssup9603
authors	Bach, Boudewijn and MacGillivray, Trina
year	1996
title	Semi-manual design support for increasing railwaystation catchment & sustainable traffic routing
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The shape ('configuration'), location and direction of the pattern of potential trips by foot or bicycle can help decision makers and designers:- the shape of such a pattern informs about the potential size of a traffic calming area(such as 30Km-zoning),- the location of such a pattern refers to the user-groups and specific destinations that a urban network should bring in safe reach for dictated groups,- the direction of such a pattern, together with shape and location, points to the best routing to raise the Sustainable Traffic Modal Split or to improve the reach of destinations like a railway-station.The patters can be generated from zip-code's of user-groups with obvious and daily destinations (school-children, rail-passengers). The next step confronts the theoretical pattern with the layout of streets and the traffic flow, mapping or listing (potential) confrontations between cars and the non-motorised modes, a basis for economical investment in traffic-safety.A design can 'model' the analysed pattern(s) to a economic, direct and safe base (cycle or pedestrian) network. In co-operation, the Dutch the traffic consultant "Verkeersadviesbureau Diepens & Okkema" in Delft, The Netherlands and the Faculty of Architecture, Delft University of Technology, in Delft, The Netherlands, develloped the semi-manual design & decision support system "STAR-Analysis"
series	DDSS
last changed	2003/11/21 15:16

_id	ddssar9638
id	ddssar9638
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	1996
title	A Conceptual Model for Concurrent Engineering in Building Design according to Domain Theory
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Concurrent engineering is a design strategy in which various designers participate in a co-ordinated parallel process. In this process series of functions are simultaneously integrated into a common form. Processes of this type ask for the identification, definition and specification of relatively independent design fields. They also ask for specific design knowledge designers should master in order to participate in these processes. The paper presents a conceptual model of co-ordinated parallel design processes in which architectural space is simultaneously defined in the intersection of three systems: a morphological or level-bound system, a functional or domain-bound system and a procedural or phase-bound system. Design strategies for concurrent engineering are concerned with process design, a design task which is comparable to the design of objects. For successfully accomplishing this task, knowledge is needed of the structural properties of objects and systems; more specifically of the morphological, functional and procedural levels which condition the design fields from which these objects emerge, of the series of generic forms which condition their appearance and of the typological knowledge which conditions their coherence in the overall process.
series	DDSS
last changed	2003/11/21 15:16

_id	c872
authors	Beliveau, Y.J., Fithian, J.E. and Deisenroth, M.P.
year	1996
title	Autonomous vehicle navigation with real-time 3D laser based positioning for construction
source	Automation in Construction 5 (4) (1996) pp. 261-272
summary	Autonomous Guided Vehicles (AGVs) are a way of life in manufacturing where navigation can be done in a structured environment. Construction is an unstructured environment and requires a different type of navigation system to deal with three dimensional control and rough terrain. This paper provides a review of navigation systems that utilize dead-reckoning in conjunction with absolute referencing systems such as beacon-based systems, and vision and mapping based system. The use of a real-time laser based technology is demonstrated as a new form of navigation. This, technology does not rely on dead reckoning. The paper outlines the issues and strategies in guiding an autonomous vehicle utilizing only the laser-based positioning system. Algorithms were developed to provide real-time control of the AGV. The laser based positioning system is unique in that it provides three dimensional position data with five updates per second. No other system can provide this level of performance. This allows for control of end effectors and autonomous vehicles in complex and unstructured three dimensional environments. The use of this new type of navigation makes possible the automation of large complex assemblies in rough terrain such as construction.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	82ff
authors	Bhavnani, S.K., Flemming, U., Forsythe, D.E., Garrett, J.H., Shaw, D.S. and Tsai, A.
year	1996
title	CAD usage in an architectural office: from observations to active assistance
source	Automation in Construction 5 (3) (1996) pp. 243-255
summary	The functionality and resources provided by CAD systems have been increasing rapidly, but productivity growth expected from their use has been difficult to achieve. Although many surveys describe this productivity puzzle, few studies have been conducted on actual CAD users to understand its causes. In an effort to arrive at such an understanding, the first author visited a federal architectural office and observed CAD users in their natural setting. This paper describes preliminary results obtained from the study, which used ethnographic techniques developed by cultural anthropologists. The study revealed that users had leveled-off in their learning and experimentation and were using the CAD system in suboptimal ways. By asking why users were not using many resources available to them to improve performance, the observer uncovered issues of communication and management that needed to be addressed. Based on this understanding, the authors provide explicit recommendations to CAD users and vendors. In addition, they hypothesize that users might benefit from a system that provides active assistance, that is, intervenes spontaneously with advice, assistance, and relevant information while the user interacts with the CAD system. They conclude with some issues revealed by the study that should be considered when developing such active assistance.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c4be
authors	Bock, T., Stricker, D., Fliedner, J. and Huynh, T.
year	1996
title	Automatic generation of the controlling-system for a wall construction robot
source	Automation in Construction 5 (1) (1996) pp. 15-21
summary	In this article we present several important aspects of a software system control. This is designed and developed for a wall assembly robot in an European Esprit III project called ROCCO, RObot assembly system for Computer integrated COnstruction. The system consists of an off-line program for planning of complex assembly tasks and for generating robot actions. The execution is controlled through an adaptive user interface and gives the user the possibilities to switch in an on-line mode command. All the software is designed with the object-oriented concept and implemented in C + +. The wall assembly system is organized on the base of the successive generation of different types of actions, called "Mission", "Task", and "Action". They represent different levels of assembly complexities. Those different actions are organized in a tree structure. Furthermore, the software system can be connected to a CAD-robot simulation software for checking the robot assembly motions. Added to the control system, a recovery module has been implemented for all possible errors during the construction. First the OO-model of the world and of robot activities will be presented. Secondly, several aspects of the algorithm will be explained and at the end we will show the strategy used for the robot motion.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	af53
authors	Boyer, E. and Mitgang, L.
year	1996
title	Building community: a new future for architecture education and practice
source	Carnegie Foundation for the Advancement of Teaching
summary	Internships, before and after graduation, are the most essential link connecting students to the world of practice. Yet, by all accounts, internship is perhaps the most troubled phase of the continuing education of architects. During this century, as architectural knowledge grew more complex, the apprenticeship system withered away and schools assumed much of the responsibility for preparing architects for practice. However, schools cannot do the whole job. It is widely acknowledged that certain kinds of technical and practical knowledge are best learned in the workplace itself, under the guidance of experienced professionals. All state accrediting boards require a minimum period of internship-usually about three years-before a person is eligible to take the licensing exam. The National Council of Architectural Registration Boards (NCARB) allows students to earn up to two years of work credit prior to acquisition of an accredited degree. The Intern Development Program (IDP), launched by NCARB and the American Institute of Architects in 1979, provides the framework for internship in some forty states. The program was designed to assure that interns receive adequate mentoring, that experiences are well-documented, and that employers and interns allocate enough time to a range of educational and vocational experiences to prepare students for eventual licensure. As the IDP Guidelines state, "The shift from school to office is not a transition from theory to pragmatism. It is a period when theory merges with pragmatism.... It's a time when you: apply your formal education to the daily realities of architectural practice; acquire comprehensive experience in basic practice areas; explore specialized areas of practice; develop professional judgment; continue your formal education in architecture; and refine your career goals." Whatever its accomplishments, however, we found broad consensus that the Intern Development Program has not, by itself, solved the problems of internship. Though we found mutually satisfying internship programs at several of the firms we visited or heard about around the country, at many others interns told us they were not receiving the continuing education and experience they needed. The truth is that architecture has serious, unsolved problems compared with other fields when it comes to supplying on-the-job learning experiences to induct students into the profession on a massive scale. Medicine has teaching hospitals. Beginning teachers work in actual classrooms, supported by school taxes. Law offices are, for the most part, in a better financial position to support young lawyers and pay them living wages. The architecture profession, by contrast, must support a required system of internship prior to licensure in an industry that has neither the financial resources of law or medicine, the stability and public support of teaching, nor a network of locations like hospitals or schools where education and practice can be seamlessly connected. And many employers acknowledged those problems. "The profession has all but undermined the traditional relationship between the profession and the academy," said Neil Frankel, FAIA, executive vice president of Perkins & Will, a multinational firm with offices in New York, Chicago, Washington, and London. "Historically, until the advent of the computer, the profession said, 'Okay, go to school, then we in the profession will teach you what the real world is like.' With the coming of the computer, the profession needed a skill that students had, and has left behind the other responsibilities." One intern told us she had been stuck for months doing relatively menial tasks such as toilet elevations. Another intern at a medium-sized firm told us he had been working sixty to seventy hours per week for a year and a half. "Then my wife had a baby and I 'slacked off' to fifty hours. The partner called me in and I got called on the carpet for not working hard enough." "The whole process of internship is being outmoded by economics," one frustrated intern told us. "There's not the time or the money. There's no conception of people being groomed for careers. The younger staff are chosen for their value as productive workers." "We just don't have the best structure here to use an intern's abilities to their best," said a Mississippi architect. "The people who come out of school are really problems. I lost patience with one intern who was demanding that I switch him to another section so that he could learn what he needed for his IDP. I told him, 'It's not my job to teach you. You are here to produce.'" What steps might help students gain more satisfying work opportunities, both during and after graduation?
series	other
last changed	2003/04/23 15:14

_id	e309
authors	Breen, Jack and Stellingwerff, Martijn
year	1996
title	A Case for Computer-Assisted Creativity through Clarity, Project 12 CAD and Beyond
source	CAD Creativeness [Conference Proceedings / ISBN 83-905377-0-2] Bialystock (Poland), 25-27 April 1996 pp. 31-35
summary	A paper exploring the opportunities of different Design Media for the benefit of Architectural and Urban Composition. It is argued that during the design process, the designer develops Models for a projected end result, which are visualised in the form of Images using traditional media. The Computer affords the possibility of creating (virtual) Models from which Images can be taken. Current types of Computer Interfaces still form an obstacle for creative computer assisted design, comparable to Sketching. It is argued that the Clarity of the medium will need to be enhanced, if it is to become an Instrument for truly creative design. Using the example of an educational, practical CAD exercise, the case for' Clarity for the benefit of creative Computing is put forward.
series	plCAD
email
last changed	2003/05/17 10:01

_id	a0d3
authors	Breen, Jack and Stellingwerff, Martijn
year	1996
title	A Case For Computer Assisted Creativity Through Clarity - Project 12 CAD and Beyond ...
source	Approaches to Computer Aided Architectural Composition [ISBN 83-905377-1-0] 1996, pp. 45-60
summary	A paper exploring the opportunities of different Design Media for the benefit of Architectural and Urban Composition. It is argued that during the design process, the designer develops Models for a projected end result, which are visualised in the form of Images using traditional media. The Computer affords the possibility of creating (virtual) Models from which Images can be taken. Current types of Computer Interfaces still form an obstacle for creative computer assisted design, comparable to Sketching. It is argued that the Clarity of the medium will need to be enhanced, if it is to become an Instrument for truly creative design. Using the example of an educational, practical CAD exercise, the case for Clarity for the benefit of creative Computing is put forward.
series	other
last changed	1999/04/08 17:16

For more results click below: