Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 482

Reformat results as: short short into frame detailed detailed into frame

_id	ddssar9601
id	ddssar9601
authors	Achten, H.H., Bax, M.F.Th. and Oxman, R.M.
year	1996
title	Generic Representations and the Generic Grid: Knowledge Interface, Organisation and Support of the (early) Design Process
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Computer Aided Design requires the implementation of architectural issues in order to support the architectural design process. These issues consist of elements, knowledge structures, and design processes that are typical for architectural design. The paper introduces two concepts that aim to define and model some of such architectural issues: building types and design processes. The first concept, the Generic grid, will be shown to structure the description of designs, provide a form-based hierarchical decomposition of design elements, and to provide conditions to accommodate concurrent design processes. The second concept, the Generic representation, models generic and typological knowledge of building types through the use of graphic representations with specific knowledge contents. The paper discusses both concepts and will show the potential of implementing Generic representations on the basis of the Generic grid in CAAD systems.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup9604
id	ddssup9604
authors	Boelen, A.J.
year	1996
title	Impact-Analysis of Urban Design Realtime impact-analysis models for urban designers
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The past five years Prof Dr Jr T.M. de Jong, professor in environmental planning and sustainability at the Technical University of Delft, has developed a theoretical foundation for the analysis of urban design on the ecological, technical, economical, cultural and political impacts of morphologic interventions on different levels of scale. From september 1994 Jr AJ. Boelen (Urban Design Scientist and Knowledge Engineer) started a research project at the same university to further explore the possibilities of these theories and to develop impact evaluation models for urban design and development with the theoretical work of De Jong as a starting point. The paper discusses the development of a design and decision support system based on these theories. For the development of this system, techniques like object-orientation, genetic algorithms and knowledge engineering are used. The user interface, the relation between the real world, paper maps and virtual maps and the presentation of design-interventions and impacts caused by the interventions are important issues. The development-process is an interactive step by step process. It consists of the making of a prototype of the system, testing the theory and hypothe-sisses the system is based on, by applying tests end adjusting the theory and hypothesisses where needed. Eventually the system must be able to act as an integrator of many different models already developed or still to be developed. The structure of the system will allow easy future expansion and adjustment to changing insights. The logic used to develop the basic theory on which this system is founded makes it possible to even introduce and maintain rather subjective aspects like quality or appraisal as impacts that can be evaluated. In a previously developed system "Momentum" this was proved to work effectively for the national level. In this project we will - amongst other things - try to prove the effectiveness of impact-evaluation for other levels of scale.
series	DDSS
email
last changed	2003/11/21 15:16

_id	8bd9
authors	Coomans, M.K.D. and Oxman, R.M.
year	1996
title	Prototyping of Designs in Virtual Reality
source	H.J.P. Timmermans (ed.), 3rd Design and Decision Support Systems in Architecture and Urban Planning Conference, Vol I: Architecture Proceedings, pp. 13-25
summary	Conventional CAD systems have not yet proven their ability to provide support for activities which characterise the early conceptual phase of design. We propose to refer to this set of capabilities of the human designer in conventional design as, design prototyping. We define the theoretical limitations of current CAD systems for supporting design prototyping, and postulate the potential of functionally dedicated, task related, CAD modules in Virtual Reality as a means to provide a unique form of a knowledgebased, visual design support environment for design prototyping support. We are currently engaged in a research program in which we explore CAD as a medium to support early conceptual design through rapid prototyping of architectural form. Furthermore we are exploring Virtual Reality as a potential design prototyping environment in which prototypes of designs can be constructed, communicated and visually evaluated at a high level of verisimilitude. In the first phase we have built the prototype system VIDE. This system has been used for extensive internal evaluation. In the ongoing second phase we are constructing an empirical research to observe designers at work on design prototyping in the Virtual Reality environment.
series	other
last changed	2003/04/23 15:50

_id	ddssup9605
id	ddssup9605
authors	Demir, Yuksel
year	1996
title	A Design & Decision Support System Proposal for Housing
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The subject of this study is to develop an information management system integrating all the related specialists and sources of information virtually from all related fields in building sector (housing) of Turkey; including design, production, construction, marketing, research. The application field has been chosen as housing for having a contribution to the existing housing problem. Although the subject of architecture is one : "the building", the specialists taking place during the lifetime of a building (from design, to destruction) are numerous. Moreover the links between practitioners, academicians, industry are missing Conventional methods, technology are expensive, time consuming. and insufficient to establish and maintain a healthy coordination between these contributors (mainly the design team and all the other related persons, institutions etc.). This has a strong negative effect on the concepts of "wholeness " and "integrity". The result is a built environment which is lacking significant qualities, while the money has been spent is even much more than required for a proper result. This means the loss of a considerable amount of resources. Especially in a country, which has to build thousands of houses each year, for low income groups, the efficient use of the limited sources becomes more essential. Though the potential user range of the system may include constructors, contractors, building element / material producers and retailers, surveyors, institutions, universities, the main user is aimed to be the architect. The system is aimed to support designers to deal with "complexity" without neglecting the concept of "wholeness". Within the study, the problems which became a stimulus for the development of this system will be investigated. The philosophical base, structure and the possible advantages of the proposal will be discussed.
keywords	Design & Decision Support Systems, Information Technology, Information Management, Holistic View of Approach, Specialization
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9610
id	ddssar9610
authors	Fahmy, A.B. and Vakalo, E.-G.
year	1996
title	A conceptual framework for deriving and analyzing the geometric structures of orthogonal architectural compositions in plan
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	This paper introduces a conceptual framework for the analysis and generation of the underlying geometry of orthogonal architectural compositions in plan. The proposed framework has three interrelated objectives: (1) to allow the systematic analysis and derivation of the geometric structures of orthogonal architectural compositions in plan, (2) to describe the spatial relations among their constituent elements, and (3) to enumerate the morphological operations involved creating these relations. It comprises of a grammatical formalism and two data structures. The grammatical formalism allows the systematic derivation and analysis of the geometric structures of architectural compositions in plan. The first data structure is a table that enumerates the rules used to derive and/or analyze geometric structures and the sequence of their application. The second data structure is a binary tree that represents the spatial relations between the shapes produced during these processes.
series	DDSS
last changed	2003/08/07 16:36

_id	89ca
authors	Garcia, Renato
year	1996
title	Sound Structure: Using Data Sonification to Enhance Building Structures CAI
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 109-117
doi	https://doi.org/10.52842/conf.caadria.1996.109
summary	Although sound is now extensively used to enrich multimedia applications in the form of simple audio signals, earcons, musical passages and speech, it has unfortunately been under-utilized as a means of data representation. Sound, having many characteristics which enable it to convey multi-dimensional information, provides a broad channel for dynamically presenting data in a learning environment. This paper looks into how teaching concepts of building structures to students of architecture and engineering through computers and multimedia can be enhanced by enlisting the use of appropriate sound parameters. Sound is useful in presenting redundant or supplementary information such as in portraying building structural response to static and dynamic external loading. This process of audiolization, which refers to the use of sounds to present data, can alleviate much of the cognitive load that usually burdens visual displays and has been used to some degree of success in various studies on scientific representation. Where appropriate, audiolization can be synchronized to more established visualization processes to provide more effective multi-modal multimedia systems for the study of building structures.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ddssar9612
id	ddssar9612
authors	Gorawara-Bhat, Rita
year	1996
title	The physical context of social order
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	The present ethnographic study of work settings in an established survey research center (Midwest Survey) is unique in that it combines both social organizational specifcs j4 interior physical context in contrast to previous studies that have focussed either on physical aspects or on the social dimensions of work settings. For more than four years the author observed the spatial adaptation by personnel of Midwest Survey. The dates under consideration roughly coincide with a move of Midwest Survey from an original facility to a new (and larger) set of offices. Anchored by seventy three open-ended interviews (constituing roughly 30% of the staff) the observations were carried on during and after the interviews. The synthesis of the ethnographic material revealed that physical settings act not only as a background for facilities, but they become a salient aspect of work life as indicators of status /role congruency and incongruency. Physical settings, therefore, are proposed as "extension" attributes of role structure. In doing so, Nadel's conceptualization of role structure as comprising pivotal arid peripheral attributes (1957) is amplified to include the physical setting as an "extension" attribute. Theoretical and practical implications of the study are suggested.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssup9614
id	ddssup9614
authors	Loughreit, Fouad
year	1996
title	Methods to assist the design of road surfaces with a reservoir structure: To improve flood risk management
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Reservoir road surfaces can be seen as equipment of the future, in that they have two functions in the same structure (circulation and hydraulic functions). They can thus be laid without immobilising land, which is very expensive and prized in urban areas. Furthermore, they enable the limitation of the flow or volumes of running water, and thus help control rainwater, resulting in better flood risk management. The questions asked by drainage designers are how can we design these structures in the best way? How are they going to work for different types of rain (rain from storms, prolonged winter rain ....)? As for the public administrators, they wonder how a series of areas equipped with this type of technique (total flow management) would work. By solving this latter problem, we could really arouse interest in flood risk management. Given the diversity of structures possible for reservoir road surfaces (regulated, non-regulated, draining surface, dispersion surface...), we suggest comparing design and simulation methods, taking into account the measurement and total flow management problems mentioned above. So as to validate these comparisons and to give some directions concerning the use of one or the other methods, we use flow-metre measures on two different sites in Lyons. One of these sites is a car- park on a tertiary activity zone on the La Doua campus in Villeurbanne, the other a refuse dump in the Greater Lyons area in the town of Craponne. They are both interesting as they have different features. The first is non-regulated downstream and is used on a car-park for light motor-vehicles. The other is regulated and the traffic on it is made up of lorries. These sites will be described in this article.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ddssar9625
id	ddssar9625
authors	Sanui, Junichiro
year	1996
title	Visualization of users' requirements: Introduction of the Evaluation Grid Method
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	During the last decade, a new type of approaches have emerged in Japanese environmental psychology. These approaches have characteristics that they are aiming to clarify users' requirements for the environment as the design questions to be solved, compared with the traditional approaches aiming to clarify the environment-human relationship to provide actual design solutions. As an example of these new approaches, the Evaluation Grid Method (EGM), a semi-structured interview method developed by the author based on Kelly's Personal Construct Theory is introduced. In the EGM, by asking the reasons of why an environment is more preferable to others recurrently, together with leading questions (laddering), each participant's requirements to the environment are elicited structurally as well as phenomenologically. Also by cumulating each participant's requirements, the extensive structure of the requirements to the environment embraced by people is produced. In this paper, a detailed procedure and the outcome of the EGM are presented on the elicitation of workers' requirements for the office environment. Also recent applied examples where the EGM research was applied as an design aid in architectural as well as industrial field will be introduced.
series	DDSS
last changed	2003/08/07 16:36

_id	ddssar9627
id	ddssar9627
authors	Sariyildiz, S., Schwenck, M. and Jander, E.
year	1996
title	Multimedia Teachware in the Field of Architectural Design
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Software systems for educational purposes have been developed and used in many application areas. In this paper we will describe a development in the field of building science. ClAD is a teachware system directed to be used in the education of students of architecture as well as a tool that gives a survey to architects and engineers in the practice. In the first place it provides information about the use of computer science technologies in the building design process. Furthermore, information about the architectural design process itself is included. Based on an analysis of general requirements and specific demands of the application field we describe our solution concept. Very important conclusions are that the system has to integrate the use of all media which are usually used by architects by offering a flexible and well-designed user interface and allowing a high degree of interactive work. After covering the development process as a combination of top down and bottom up strategies we describe the overall structure of ClAD as a modular system which can be extended and updated easily. Finally, we give an overview about some parts of the system to demonstrate the implementation of the concepts mentioned above.
series	DDSS
last changed	2003/08/07 16:36

_id	7b7e
id	7b7e
authors	Stahl, Benedikt
year	1996
title	EXPERIMENTAL SPATIAL STRUCTURES
source	Full-Scale Modeling in the Age of Virtual Reality [6th EFA-Conference Proceedings]
summary	To speak about Experimental Spatial Structures at first means to find the right definition. Therefore we have to find definitions for three different subjects experiment, space and structure. Experiment - that means to perform scientific experiments. The attempt, the test, the simulation, the model. To do experimental work, that means to take measurements, to count, to compare, to try analyzing, to find out differences between substances. In our case, the experimental character of our work is impressed on working by using different methods to show the basic idea of our theme. To act and to use the full-scale-models with your body. Space - that means architectural space which is defined through architectural spatial elements: wall, ceiling, floor, corner, staircase, way, opening, border, edge and so on. So to speak the substances we need to do our experiments. Structure - means order. The contemplation and the comparison of different spatial structures allows the division of different basic subjects like: euclidian structures or physical structures or the depth of space and so on. To analyze or to design architectural space by using spatial structures as one possibility to do architectural work. As a summary: the experiment or the attempt to show architectural, spatial structures. Space and spatial structures are not only impressed by forms but also and as a main thing by action and moving in space. The role of full-scale modeling, of experimental work related to “reality” in architecture is to simulate basic situations which are not dependent on ideas how they are developed in particular. We try to give some instructions or impressions of elementary architectural structures which can be used as instruments to design space of life.
keywords	Model Simulation, Real Environments
series	other
type	normal paper
last changed	2007/07/26 07:34

_id	ddssup9620
id	ddssup9620
authors	van der Waerden, P., Borgers, A. and Timmerinans, H.
year	1996
title	Route related data of shopping centre visitors and geographical information systems
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Pedestrian route information can support different research activities such as the calculation of economic performances of shopping streets, the evaluation of parking policy measures, and the development of pedestrian design standards. These research activities are helpful in planning and designing shopping centres. Pedestrians' routes are used to measure walking distances, calculate other route related data, and estimate pedestrians' densities. To use route related data efficiently, it is necessary to capture the observed routes of pedestrians in some kind of computer system. Geographical Information Systems (GIS) might offer an opportunity to deal with route related data because they can handle spatial and non-spatial data for example of line segments. However, very few GIS offer tools to enter, store, analyze and display route related data. In the new version of TransCAD a special Route System module is implemented to handle routes. The route system stores the routes, the different links routes are made up, and the possible stops on the route in separate tables that can be analyzed and displayed in a map. This paper describes the structure and the contents of pedestrians' route information as it can be used in various research projects. From these research projects some general requirements to handle route related, are extracted. Special attention is paid to the way TransCAD deals with routes. A parking research conducted in the main shopping centre of Veldhoven is used to describe and illustrate the possibilities of route related data of pedestrians, and evaluate the possibilities TransCAD offers to deal with this kind of data.
series	DDSS
last changed	2003/08/07 16:36

_id	4b55
authors	Af Klercker, J. , Ekholm, A. and Fridqvist, S. (Ed.)
year	1996
title	Education for Practice [Conference Proceedings]
source	14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2 / Lund (Sweden) 12-14 September 1996, 425 p.
doi	https://doi.org/10.52842/conf.ecaade.1996
summary	There are many of us trying to make place for CAAD in a natural way in the Curriculum of the Architect school. We would like to make CAAD useful to the students already during their studies. Even if we have the support of our collegues for running courses there is very often no space in the timetable. And even if we have all the entusiasm of our students it is hard to practice your CAAD knowledge on projects where it is not asked for. The education of architects in the use of computers has lead me to try to find "the roots of education of architects" in general. A collegue of mine in a bookshelf of course litterature in Informatics found and put into my hands "Educating the reflective practitioner" by Donald Schön. It lead to an interesting process of personal reflection and discussion within our CAAD team. We think by the way that the theme of the conference points to the heart of the message in Donald Schöns book and we are inviting him as a key note speaker at the Conference.
series	eCAADe
type	normal paper
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:49

_id	63e6
authors	Af Klercker, Jonas
year	1996
title	Visualisation for Clients - One Example of Educating CAAD for Practice
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 17-24
doi	https://doi.org/10.52842/conf.ecaade.1996.017
summary	During the spring term 1996, 13 students of the 3rd and 4th year at the School of Architecture at Lund University had the opportunity to make a one semester CAAD project. 11 students chose the individual exercise to use computer media for developing a small architectural design in interaction with a client. The focus was set more on visualization and the process of communicating ideas, feelings and practical solutions between architect and client and visa versa rather than concentrated on the final product. This paper describes the process of the project and the reflections of the participants. It will discuss problems from the teachers point of view.
series	eCAADe
email
more	http://www.caad.lth.se/ECAADE/
last changed	2022/06/07 07:54

_id	0ec9
authors	Agranovich-Ponomareva. E., Litvinova, A. And Mickich, A.
year	1996
title	Architectural Computing in School and Real Designing
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 25-28
doi	https://doi.org/10.52842/conf.ecaade.1996.025
summary	The existing system of architectural education ( including computer ) as has shown practice has appeared not absolutly perfect. It not capable to dynamic changes, active introduction of a new engineering and computer technologies, to realization about of the inquiries of a modern time. It suggest of a way of search of new models of computer training. The computer education is represented by us as certain a universal system, which permits to solve the problem of arcitectural education at a higher level. The opportunities of computers and computer technologies at such approach are used as means of increase of efficiency teaching and training. The orientation goes on final result: a opportunity to generate of the creative decisions by learnees, based on attraction of received knowledge and use for their realization of arsenal of practical skills and skills. The system represents not only certain set of experiences elements, necessary and final result sufficient for achievement, but also quite certain interrelation between them. It means, that the knowledge from a initial rate " The Introduction in computer training" must be secured and transformed for utilization in special rates and through them- in practice. The functional nucleus of the software package of such universal system is under construction as opened, apparatus an independent system. A central part of a system is a database, the structure of which is uniform for all other modules and side of enclosures. The conceptual model of a system is under construction on principles structure idea, visualization, multimedia. The listed principles are realized in model so that to encourage the user to independent creative work.
series	eCAADe
last changed	2022/06/07 07:54

_id	c204
authors	Aleksander Asanowicz
year	1996
title	Teaching and Learning - Full Brainwash
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 51-54
doi	https://doi.org/10.52842/conf.ecaade.1996.051
summary	We often speak of changes in design process due to an application of computers. But in my opinion we more often rather speak of lack of changes. Lets hope that some day we will be able to witness full integrity and compatibility of design process and tools applied in it. Quite possible such an integrity may occur in the cyberspace. Nevertheless before that could happen some changes within the teaching methods at faculties of architecture, where despite great numbers of computer equipment used, the students are still being taught as in the XIX century. In terms of achieved results it proves ineffective because application of chalk and blackboard only will always loose to new media, which allow visual perception of dinosaurs in Jurassic Park. Our civilisation is the iconographic one. And that is why teaching methods are about to change. An application of computer as simply a slide projector seems to be way too expensive. New media demands new process and new process demands new media. Lets hope that could be achieved in cyberspace as being a combination of: classic ways of teaching, hypertext, multimedia, virtual reality and a new teaching methodology (as used in Berlitz English School - full brainwash). At our faculty several years ago we experimentally undertook and applied an Integrated Design Teaching Method. A student during design process of an object simultaneously learnt all aspects and functions of the object being designing i.e.: its structure, piping and wiring, material cost and even historic evolution of its form and function. Unfortunately that concept was too extravagant as for the seventies in our reality. At present due to wide implementation of new media and tools in design process we come to consider reimplementation of IDTM again.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf57
authors	Anumba, C.J.
year	1996
title	Functional Integration in CAD Systems
source	Advances in Engineering Software, 25, 103-109
summary	This paper examines the issue of integration in CAD systems and argues that for integration to be effective, it must address the functional aspects of a CAD system. It discusses the need for integrated systems and, within a structural engineering context, identifies several facets of integration that should be targeted. These include 2-D drafting and 3-D modelling, graphical and non-graphical design information, the CAD data structure and its user interface, as well as integration of the drafting function with other engineering applications. Means of achieving these levels of integration are briefly discussed and a prognosis for the future development of integrated systems explored. Particular attention is paid to the emergence (and potential role) of `product models' which seek to encapsulate the full range of data elements required to define completely an engineering artefact.
series	journal paper
last changed	2003/04/23 15:14

_id	ddssup9601
id	ddssup9601
authors	Aoke, Yoshitsugu and Muraoka, Naoto
year	1996
title	An optimization method of the facility location by genetic algorithm
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	In planning of community-facilities, it is important to decide the facility location to provide the effective service for residents. The behavior of residents using the facility and the evaluation methods of the location have been studied. But, finding the optimum location is very hard in actual planning because the volume of calculation depends on the number of feasible locating points of facilities. To conquer the difficulty of searching the optimum location, we propose an optimization method using Genetic Algorithm. An alternative of location is expressed by a chromosome. Each chromosome consists of genes, and each gene expresses a located zone of the facility. We gave definitions of genetic procedures; crossing-over, mutation and selection. Alternatives of the facility location are generated by these genetic procedures like as life evolution. For each alternative, the behaviors of users are estimated by a spatial-interaction model, and the facilities that residents in each place choose are determined. The effectiveness of the location is measured by a total sum of distances between the facility and the user. After the confirmation of the effectiveness of our method by applying on ideal example problems, we applied it on the actual problem in Japanese town. By this method we could find the optimum location in about one-third time and effort as compared with the ordinal method.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssup9602
id	ddssup9602
authors	Arentze, T.A., Borgers, A.W.J. and Harry J.P.
year	1996
title	A knowledge-based model for developing location strategies in a DSS for retail planning
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Most DSS for retail planning are based on impact assessment models to support the evaluation of plan scenario's. This paper introduces a complementary knowledge-based model to support also the earlier stage of formulating plan scenario's. An analysis of the retail planning problem reveals the main lines of the strategies adopted by most Dutch planners and retailers to achieve their goals. A basic strategy that seems to be appropriate in most problem contexts is formulated in the form of a set of decision tables. Each decision table or system of decision tables specifies for a problem area decision rules to identify and analyse problems and to formulate possible actions. The model is implemented in a DSS where it is used in combination with quantitative impact assessment models. A case study in the area of daily good facilities demonstrates the approach. The major conclusion is that the knowledge-based approach and in particular the decision table technique provides interesting possibilities to implement planning task structures in a DSS environment.
series	DDSS
last changed	2003/11/21 15:16

_id	ddssup9603
id	ddssup9603
authors	Bach, Boudewijn and MacGillivray, Trina
year	1996
title	Semi-manual design support for increasing railwaystation catchment & sustainable traffic routing
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The shape ('configuration'), location and direction of the pattern of potential trips by foot or bicycle can help decision makers and designers:- the shape of such a pattern informs about the potential size of a traffic calming area(such as 30Km-zoning),- the location of such a pattern refers to the user-groups and specific destinations that a urban network should bring in safe reach for dictated groups,- the direction of such a pattern, together with shape and location, points to the best routing to raise the Sustainable Traffic Modal Split or to improve the reach of destinations like a railway-station.The patters can be generated from zip-code's of user-groups with obvious and daily destinations (school-children, rail-passengers). The next step confronts the theoretical pattern with the layout of streets and the traffic flow, mapping or listing (potential) confrontations between cars and the non-motorised modes, a basis for economical investment in traffic-safety.A design can 'model' the analysed pattern(s) to a economic, direct and safe base (cycle or pedestrian) network. In co-operation, the Dutch the traffic consultant "Verkeersadviesbureau Diepens & Okkema" in Delft, The Netherlands and the Faculty of Architecture, Delft University of Technology, in Delft, The Netherlands, develloped the semi-manual design & decision support system "STAR-Analysis"
series	DDSS
last changed	2003/11/21 15:16

For more results click below: