Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 482

Reformat results as: short short into frame detailed detailed into frame

_id	ddssup9602
id	ddssup9602
authors	Arentze, T.A., Borgers, A.W.J. and Harry J.P.
year	1996
title	A knowledge-based model for developing location strategies in a DSS for retail planning
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	Most DSS for retail planning are based on impact assessment models to support the evaluation of plan scenario's. This paper introduces a complementary knowledge-based model to support also the earlier stage of formulating plan scenario's. An analysis of the retail planning problem reveals the main lines of the strategies adopted by most Dutch planners and retailers to achieve their goals. A basic strategy that seems to be appropriate in most problem contexts is formulated in the form of a set of decision tables. Each decision table or system of decision tables specifies for a problem area decision rules to identify and analyse problems and to formulate possible actions. The model is implemented in a DSS where it is used in combination with quantitative impact assessment models. A case study in the area of daily good facilities demonstrates the approach. The major conclusion is that the knowledge-based approach and in particular the decision table technique provides interesting possibilities to implement planning task structures in a DSS environment.
series	DDSS
last changed	2003/11/21 15:16

_id	ddssar9638
id	ddssar9638
authors	Bax, M.F.Th. and Trum, H.M.G.J.
year	1996
title	A Conceptual Model for Concurrent Engineering in Building Design according to Domain Theory
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Concurrent engineering is a design strategy in which various designers participate in a co-ordinated parallel process. In this process series of functions are simultaneously integrated into a common form. Processes of this type ask for the identification, definition and specification of relatively independent design fields. They also ask for specific design knowledge designers should master in order to participate in these processes. The paper presents a conceptual model of co-ordinated parallel design processes in which architectural space is simultaneously defined in the intersection of three systems: a morphological or level-bound system, a functional or domain-bound system and a procedural or phase-bound system. Design strategies for concurrent engineering are concerned with process design, a design task which is comparable to the design of objects. For successfully accomplishing this task, knowledge is needed of the structural properties of objects and systems; more specifically of the morphological, functional and procedural levels which condition the design fields from which these objects emerge, of the series of generic forms which condition their appearance and of the typological knowledge which conditions their coherence in the overall process.
series	DDSS
last changed	2003/11/21 15:16

_id	a04a
authors	Bhavnani, S.K. and John, B.E.
year	1996
title	Exploring the Unrealized Potential of Computer-Aided Drafting
source	Proceedings of CHI'96 (1996), 332-339
summary	Despite huge investments by vendors and users, CAD productivity remains disappointing. Our analysis of real- world CAD usage shows that even after many years of experience, users tend to use suboptimal strategies to perform complex CAD tasks. Additionally, some of these strategies have a marked resemblance to manual drafting techniques. Although this phenomenon has been previously reported, this paper explores explanations for its causes and persistence. We argue that the strategic knowledge to use CAD effectively is neither defined nor explicitly taught. In the absence of a well-formed strategy, users often develop a synthetic mental model of CAD containing a mixture of manual and CAD methods. As these suboptimal strategies do not necessarily prevent users from producing clean, accurate drawings, the inefficiencies tend to remain unrecognized and users have little motivation to develop better strategies. To reverse this situation we recommend that the strategic knowledge to use CAD effectively should be made explicit and provided early in training. We use our analysis to begin the process of making this strategic knowledge explicit. We conclude by discussing the ramifications of this research in training as well as in the development of future computer aids for drawing and design.
keywords	Task Decomposition; Learning
series	other
email
last changed	2003/11/21 15:16

_id	c4be
authors	Bock, T., Stricker, D., Fliedner, J. and Huynh, T.
year	1996
title	Automatic generation of the controlling-system for a wall construction robot
source	Automation in Construction 5 (1) (1996) pp. 15-21
summary	In this article we present several important aspects of a software system control. This is designed and developed for a wall assembly robot in an European Esprit III project called ROCCO, RObot assembly system for Computer integrated COnstruction. The system consists of an off-line program for planning of complex assembly tasks and for generating robot actions. The execution is controlled through an adaptive user interface and gives the user the possibilities to switch in an on-line mode command. All the software is designed with the object-oriented concept and implemented in C + +. The wall assembly system is organized on the base of the successive generation of different types of actions, called "Mission", "Task", and "Action". They represent different levels of assembly complexities. Those different actions are organized in a tree structure. Furthermore, the software system can be connected to a CAD-robot simulation software for checking the robot assembly motions. Added to the control system, a recovery module has been implemented for all possible errors during the construction. First the OO-model of the world and of robot activities will be presented. Secondly, several aspects of the algorithm will be explained and at the end we will show the strategy used for the robot motion.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	9530
authors	Broadhurst, S.J., Cockerham, G., Taylor, N. and Pridmore, T.
year	1996
title	Automatic task modelling for sewer studies
source	Automation in Construction 5 (1) (1996) pp. 61-71
summary	Research into the development of robotic modules is discussed in the context of cost-effective, small bore, non-man entry (NME) sewer renovation. Following an introduction to the engineering problem or task and the respective task-associated sensing system, interest is centred upon suitably robust task kinematics and control, where predictive modelling is implemented employing the GRASP robotic simulation software package. The physical prototype and its accompanying environment are discussed and general conclusions drawn.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	6063
authors	Cheng, Nancy Yen-Wen
year	1996
title	Teaching CAD as a Foreign Language
doi	https://doi.org/10.52842/conf.caadria.1996.011
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 11-20
summary	By looking at the well-developed discipline of language teaching, we can improve instruction of computer aided design communication. Language teaching not only breaks down a complex field into attainable steps, but also shows how learning strategies and attitudes can enhance mastery. Guiding students in learning approaches will equip them to deal with constantly changing technology. Even at an introductory level, awareness of the learning process can heighten learning. Thus, giving a conceptual framework and enhancing resource-finding, brainstorming and coping abilities will lead to threshold competence. Practicing these strategies on realistic projects hones the ability to connect concepts to actual situations. Both design or research projects exercise resource-usage, task management, crisis management, but specifically, collaboration exercises which engage the students with a real audience can provide strong motivation and link academic study to practical concerns. Ideas about teaching techniques are documented with examples from the University of Hong Kong.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	18bc
authors	Clay, Sharon and Wilhelms, Jane
year	1996
title	Put: Language-Based Interactive Manipulation of Objects
source	IEEE Computer Graphics and Applications
summary	Describing a scene to a computer is an inherent task of computer graphics applications. Modeled scenes are typically built with direct placement techniques or specialized scripting languages. The scene description task could be greatly eased if natural language were an interactive control option. However, natural language understanding is notoriously difficult for computers. This difficulty is exacerbated in the case of computer graphics by the need for geometric output, not just "conceptual understanding" or high-level inferencing. General text-understanding techniques have not been successfully applied to scene generation. Typically, a few task-specific commands, such as "walk," are implemented as an ad-hoc collection of procedures. Our approach aims to separate the expressive power of fundamental natural concepts from the difficult task of text understanding. We are developing a 3D object placement system based on a combination of natural commands and interactive techniques. Guided by research in cognitive linguistics, we use basic spatial relationships--such as in, on, and at--and fundamental scene parameters--such as viewer location and object dimensionality--to identify regions of placement for objects in a scene. These natural commands can be used to quickly prototype a complex scene and constrain object placement.
series	journal paper
last changed	2003/04/23 15:14

_id	e2c4
authors	Comair, C., Kaga, A. and Sasada, T.
year	1996
title	Collaborative Design System with Network Technologies in Design Projects
doi	https://doi.org/10.52842/conf.caadria.1996.269
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 269-286
summary	This paper depicts the work of the team of researchers at the Sasada Laboratory in the area of collaborative design and the integration of global area network such as the Internet in order to extend the architectural studio into cyber-space. The Sasada Laboratory is located at the University of Osaka, Faculty of Engineering, Department of Environmental engineering, Japan. The portfolio of the Laboratory is extensive and impressive. The projects which were produced by the men and women of the Laboratory range from the production of databases and computer simulation of several segments of different cities throughout the world to specific studies of architectural monuments. The work performed on the databases was varied and included simulation of past, present, and future events. These databases were often huge and very complex to build. They presented challenges that sometimes seemed impossible to overcome. Often, specialised software, and in some cases hardware, had to be designed on the "fly” for the task. In this paper, we describe the advances of our research and how our work led us to the development of hardware and software. Most importantly, it depicts the methodology of work which our lab undertook. This research led to the birth of what we call the "Open Development Environment” (ODE) and later to the networked version of ODE (NODE). The main purpose of NODE is to allow various people, usually separated by great distances, to work together on a given project and to introduce computer simulation into the working environment. Today, our laboratory is no longer limited to the physical location of our lab. Thanks to global area networks, such as the Internet, our office has been extended into the virtual space of the web. Today, we exchange ideas and collaborate on projects using the network with people that are spread over the five continents.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	8bd9
authors	Coomans, M.K.D. and Oxman, R.M.
year	1996
title	Prototyping of Designs in Virtual Reality
source	H.J.P. Timmermans (ed.), 3rd Design and Decision Support Systems in Architecture and Urban Planning Conference, Vol I: Architecture Proceedings, pp. 13-25
summary	Conventional CAD systems have not yet proven their ability to provide support for activities which characterise the early conceptual phase of design. We propose to refer to this set of capabilities of the human designer in conventional design as, design prototyping. We define the theoretical limitations of current CAD systems for supporting design prototyping, and postulate the potential of functionally dedicated, task related, CAD modules in Virtual Reality as a means to provide a unique form of a knowledgebased, visual design support environment for design prototyping support. We are currently engaged in a research program in which we explore CAD as a medium to support early conceptual design through rapid prototyping of architectural form. Furthermore we are exploring Virtual Reality as a potential design prototyping environment in which prototypes of designs can be constructed, communicated and visually evaluated at a high level of verisimilitude. In the first phase we have built the prototype system VIDE. This system has been used for extensive internal evaluation. In the ongoing second phase we are constructing an empirical research to observe designers at work on design prototyping in the Virtual Reality environment.
series	other
last changed	2003/04/23 15:50

_id	ddssar9602
id	ddssar9602
authors	Coomans, M.K.D. and Oxman, R.M.
year	1996
title	Prototyping of Designs in Virtual Reality
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings (Spa, Belgium), August 18-21, 1996
summary	Conventional CAD systems have not yet proven their ability to provide support for activities which characterise the early conceptual phase of design. We propose to refer to this set of capabilities of the human designer in conventional design as, design prototyping. We define the theoretical limitations of current CAD systems for supporting design prototyping, and postulate the potential of functionally dedicated, task related, CAD modules in Virtual Reality as a means to provide a unique form of a knowledge-based, visual design support environment for design prototyping support. We are currently engaged in a research program in which we explore CAD as a medium to support early conceptual design through rapid prototyping of architectural form. Furthermore we are exploring Virtual Reality as a potential design prototyping environment in which prototypes of designs can be constructed, communicated and visually evaluated at a high level of verisimilitude. In the first phase we have built the prototype system VIDE. This system has been used for extensive internal evaluation. In the ongoing second phase we are constructing an empirical research to observe designers at work on design prototyping in the Virtual Reality environment.
series	DDSS
last changed	2003/08/07 16:36

_id	eb51
authors	Coyne, Richard
year	1996
title	CAAD, Curriculum and Controversy
doi	https://doi.org/10.52842/conf.ecaade.1996.121
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 121-130
summary	This paper brings some of the debate within educational theory to bear on CAAD teaching, outlining the contributions of conservatism, critical theory, radical hermeneutics and pragmatism. The paper concludes by recommending that CAAD teaching move away from conservative concepts of teaching, design and technology to integrate it into the studio. In a highly illuminating book on education theory, Shaun Gallagher (1991) outlines four current views on education that correspond to four major positions in contemporary social theory and philosophy. I will extend these categories to a consideration of attitudes to information technology, and the teaching of computing in architecture. These four positions are conservatism, critical theory, radical hermeneutics, and pragmatism. I will show how certain issues cluster around them, how each position provides the focus of various discursive practices, or intellectual conversations in contemporary thinking, and how information technology is caught up in those conversations. These four positions are not "cognitive styles," but vigorously argued domains of debate involving writers such as Gadamer, Habermas and Derrida about the theory of interpretation. The field of interpretation is known as hermeneutics, which is concerned less with epistemology and knowledge than with understanding. Interpretation theory applies to reading texts, interpreting the law, and appreciating art, but also to the application of any practical task, such as making art, drawing, defining and solving problems, and design (Coyne and Snodgrass, 1995). Hermeneutics provides a coherent focus for considering many contemporary issues and many domains of practice. I outline what these positions in education mean in terms of CAAD (computer-aided architectural design) in the curriculum.
series	eCAADe
email
more	http://www.caad.ac.uk/~richard
last changed	2022/06/07 07:56

_id	911c
authors	Darken, Rudolph P.
year	1996
title	Wayfinding in Large-Scale Virtual Worlds
source	George Washington University
summary	As important as navigation is to human performance in virtual worlds, it is an often overlooked problem in the design process. This dissertation reports an experiment intended to show that real-world wayfinding and environmental design principles are effective in designing virtual worlds which support skilled wayfinding behavior. The design principles are adapted from both the cognitive psychology literature and urban and architectural design methodologies. There are two categories of design principles; those that guide the organizational structure of the environment, and those that guide the use and presentation of maps. The study measures subject performance on a complex searching task in a number of virtual worlds with differing environmental cues. The environments are extremely large and consist of open sea, land, and ships which are used as targets for search tasks. The worlds are augmented with either a radial grid, a map, both, or neither. For each trial, the subject's viewpoint position and orientation was sampled approximately once per second. A verbal protocol with accompanying video was used to elicit information about the search strategies employed. A map drawing exercise followed each trial in order to gain insight to the subject's spatial knowledge (i.e. cognitive map) of the environment. The results show that subjects in the treatment without any additional cues were often disoriented and had extreme difficulty completing the task. The grid was shown to provide superior directional information but both treatments using the map were superior overall due to the geocentric perspective provided. Behaviors associated with each treatment indicate that the cues had a strong effect on both search performance and search strategy. The results suggest that users of large-scale virtual worlds require structure in order to effectively navigate. Augmentations such as direction indicators, maps, and path restriction can all greatly improve both wayfinding performance and overall user satisfaction.
series	thesis:PhD
email
more	http://www.seas.gwu.edu/~sibert/darken/publications/Dissertation_95/thesis.html
last changed	2003/02/12 22:37

_id	acb9
authors	Do, Ellen Yi-Luen
year	1996
title	The Right Tool at the Right Time - Drawing as an Interface to Knowledge Based Design Aids
doi	https://doi.org/10.52842/conf.acadia.1996.191
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 191-199
summary	Designers use different symbols and diagrams in their drawings to explore alternatives and to communicate with each other. Therefore, a useful design environment should attempt to infer the designer's intentions from the drawing and, based on this inference, suggest appropriate computational tools for the task at hand. For example, a layout bubble diagram might activate design cases with similar configurations. Scribbles of view lines on a floor plan might bring up a spatial analysis tool. This research aims to develop an integrated digital sketching environment to support early design activities. The paper proposes RT, an intelligent sketch environment that provides the designers with the right tools at the right time.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	f5ee
authors	Erhorn, H., De Boer, J. and Dirksmueller, M.
year	1997
title	ADELINE, an Integrated Approach to Lighting Simulation
source	Proceedings of Right Light 4, 4th European Conference on Energy-Efficient Lighting, pp.99-103
summary	The use of daylighting and artificial lighting simulation programs to calculate complex systems and models in the design practice often is impeded by the fact that the operation of these programs, especially the model input, is extremely complicated and time-consuming. Programs that are easier to use generally do not show the calculation capabilities required in practice. A second obstacle arises as the lighting calculations often do not allow any statements regarding the interactions with the energetic and thermal building performance. Both problems are mainly due to a lacking integration of the design tools of other building design practitioners as well as due to insufficient user interfaces. The program package ADELINE (Advanced Daylight and Electric Lighting Integrated New Environment) being available since May 1996 as completely revised version 2.0 presents a promising approach to solve these problems. This contribution describes the approaches and methods used within the international project IEA Task 21 for a further development of the ADELINE system. Aim of this work is a further improvement of user interfaces based on the inclusion of new dialogs and on a portation of the program system from MS-DOS to the Windows NT platform. Additional focus is laid on the use of recent developments in the field of information technology and experiences gained in other projects on integrated building design systems, like for example EU-COMBINE, in a pragmatical way. An integrated building design system with open standardized interfaces is to be achieved inter alia by using ISOSTEP formats, database technologies and a consequent, object-oriented design.
series	other
last changed	2003/04/23 15:50

_id	4171
authors	Gero, John S. and Maher, Mary Lou
year	1996
title	Current CAAD Research at the Key Centre of Design Computing University of Sydney
doi	https://doi.org/10.52842/conf.caadria.1996.035
source	CAADRIA ‘96 [Proceedings of The First Conference on Computer Aided Architectural Design Research in Asia / ISBN 9627-75-703-9] Hong Kong (Hong Kong) 25-27 April 1996, pp. 35-52
summary	Designing is one of the most significant of human acts. It is one of the bases for change in our society. However, designers are amongst the least recongised for society’s change agents. Surprisingly, given that designing has been occurring for many millennia, our understanding of the processes of designing is remarkably limited. Part of our understanding of designing comes not only from studying human designers as they design but from postulating design methods which describe some aspect of the design process without claiming to model the processes used by human designers. The early approaches to design methods were prescriptive when applied to human designers. More recently, design methods have been formalised not as humano-centred processes but as processes capable of computer implementation. Amongst the goals of these endeavours are to develop a better understanding of the processes of designing, to develop methods which can be computerised and to aid human designers through the introduction of novel methods which have no human counterpart. Much of this research is driven by the fact that human designs are very often incomplete, inadequate or just plainly poorly conceived for the task they are meant to address.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ddssup9608
id	ddssup9608
authors	Gupta, M.K., Groves M. and Moran, J.D.
year	1996
title	An EMIC approach to design: Methodology for creating supportive environments for young children
source	Timmermans, Harry (Ed.), Third Design and Decision Support Systems in Architecture and Urban Planning - Part two: Urban Planning Proceedings (Spa, Belgium), August 18-21, 1996
summary	The responsibility of the designer is to understand the unique perspective of the users, in order to create functional and efficient environments. The task of creating supportive environments often becomes more difficult when there is discrepancy between the perspective of the designer and that of the user, which is the case when designing spaces for children. The interaction of children with their environment has been identified as the basis of their development Most of the previous research has focused on the perspectives that adults have of spaces for children (etic), rather than an understanding of the child's view as the primary user of the playspace (emic). Children's perceptions are influenced by their physical and cognitive perspectives thus posing a unique challenge for designers. The objective of this study was to learn about the perception and perspective of four-and five-year-olds of their favorite playspaces. The children needed to identify their favorite spaces and also be able to verbalize the activities and meanings associated with these spaces. To avoid adult bias at the onset, the idea of utilizing a Polaroid Captiva camera was formulated, facilitating an extremely short latency period between the child taking the pictures and the opportunity to talk about their favorite playspace. The process was extremely successful, and provides first hand insight into children's perception of their built environment Photographs taken by the young children include many spaces not designed for play. The emerging themes are a source of invaluable information for designers and planners for making informed design decisions and for creating supportive environments.
series	DDSS
email
last changed	2003/08/07 16:36

_id	3451
authors	Harrison, Beverly L.
year	1996
title	The Design and Evaluation of Transparent User Interfaces. From Theory to Practice
source	University of Toronto, Toronto
summary	The central research issue addressed by this dissertation is how we can design systems where information on user interface tools is overlaid on the work product being developed with these tools. The interface tools typically appear in the display foreground while the data or work space being manipulated typically appear in the perceptual background. This represents a trade-off in focused foreground attention versus focused background attention. By better supporting human attention we hope to improve the fluency of work, where fluency is reflected in a more seamless integration between task goals, user interface tool manipulations to achieve these goals, and feedback from the data or work space being manipulated. This research specifically focuses on the design and evaluation of transparent user interface 'layers' applied to graphical user interfaces. By allowing users to see through windows, menus, and tool palettes appearing in the perceptual foreground, an improved awareness of the underlying workspace and preservation of context are possible. However, transparent overlapping objects introduce visual interference which may degrade task performance, through reduced legibility. This dissertation explores a new interface technique (i.e., transparent layering) and, more importantly, undertakes a deeper investigation into the underlying issues that have implications for the design and use of this new technique. We have conducted a series of experiments, progressively more representative of the complex stimuli from real task domains. This enables us to systematically evaluate a variety of transparent user interfaces, while remaining confident of the applicability of the results to actual task contexts. We also describe prototypes and a case study evaluation of a working system using transparency based on our design parameters and experimental findings. Our findings indicate that similarity in both image color and in image content affect the levels of visual interference. Solid imagery in either the user interface tools (e.g., icons) or in the work space content (e.g., video, rendered models) are highly interference resistant and work well up to 75% transparent (i.e., 25% of foreground image and 75% of background content). Text and wire frame images (or line drawings) perform equally poorly but are highly usable up to 50% transparent, with no apparent performance penalty. Introducing contrasting outlining techniques improves the usability of transparent text menu interfaces up to 90% transparency. These results suggest that transparency is a usable and promising interface alternative. We suggest several methods of overcoming today's technical challenges in order to integrate transparency into existing applications.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	bb5e
authors	Heintze, J., Teerhuis, P.C. and Weiden, A.J.J. v.d.
year	1996
title	Controlled hydraulics for a direct drive brick laying robot
source	Automation in Construction 5 (1) (1996) pp. 23-29
summary	Starting from a specific task requirement a brick laying robot has been designed. The tight performance claims which have been imposed by the task specification, constitute the basis for the research on control of hydraulically driven manipulators. The main goal is to increase robot efficiency and task suitability by application of modern control techniques. The introduced cascade p inner-loop for hydraulic actuators is presented as a solution for the posed control problem.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	aa08
authors	Jakimowicz, Adam
year	1996
title	Education of the Architect - Two Approaches Towards Possible Places of CAD
doi	https://doi.org/10.52842/conf.ecaade.1996.211
source	Education for Practice [14th eCAADe Conference Proceedings / ISBN 0-9523687-2-2] Lund (Sweden) 12-14 September 1996, pp. 211-220
summary	This paper discusses the limitations of the most of educational systems of the present, which seem to be no longer sufficient to face the problems of the modern world. This concerns as well architectural education. Computer Aided Design is considered here as a specific case in a wider context of general goals of education. The linear, memory based, cause - effect model of education, where remembering of final effects of the processes is the criterion of teaching efficiency, does not respond to the growing complexity of problems. The task for today is to develop the individual ability to synthesise and creatively explore spheres between separate fields and reconsider the issue of values. This paper therefore emphasises the importance of the person in education, seeing the problem of its full development as a new base and final aim for education as a whole.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	2192
authors	Mahdavi, A., Mathew, P., Hartkopf, V. and Loftness, V.
year	1996
title	Bi-directional Inference in Thermal Design
doi	https://doi.org/10.52842/conf.acadia.1996.133
source	Design Computation: Collaboration, Reasoning, Pedagogy [ACADIA Conference Proceedings / ISBN 1-880250-05-5] Tucson (Arizona / USA) October 31 - November 2, 1996, pp. 133-143
summary	This paper demonstrates a computational bi-directional energy modeling approach for building design development. Conventional simulation tools may be labeled as mono-directional in that they require a more or Iess complete design definition in order to derive performance indicators. However, in certain circumstances, it may be desirable to reverse this process: a bi-directional (or "open") inference mechanism would allow for the identification of those changes in the design variables that would accommodate a desired change in a performance indicator. The performance-to-design mapping process is an ambiguous one: the same performance (e.g. energy use of a building, temperature variations in a space) may be achieved by different design configurations (various wall and window dimensions/properties, building orientation/massing, etc.). As a result, the actual implementation of a bi-directional inference tool is a rather difficult task. The development described in this paper utilizes a preference-based approach that involves the formalization of various external or internal constraints and preferences (such as code and standard requirements, results of post-occupancy studies, individual priorities of designers and their clients, etc.) in terms of normalized numeric scales. After a brief review of the underlying technology for the implementation of the inference engine, the paper demonstrates an actual design session using a bi-directional thermal simulation tool. Specifically, a use-scenario is described in which the designer explores the tradeoffs between various design variables (glazing area, glazing type, and floor mass) in view of the resulting energy performance of a typical residential building. The paper concludes with a discussion of the potential and limitations of the bi-directional approach toward active convergence support for performance-oriented design development.
series	ACADIA
email
last changed	2022/06/07 07:59

For more results click below: