Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 50

Reformat results as: short short into frame detailed detailed into frame

_id	07d8
authors	Garza, J.M. de la and Howitt, I.
year	1998
title	Wireless communication and computing at the construction jobsite
source	Automation in Construction 7 (4) (1998) pp. 327-347
summary	For many years, the walkie-talkie has been synonymous with the construction industry. During jobsite project execution, there are three variables which can either hinder or facilitate successful results, namely, quality, quantity, and timing of information. Wireless data communications technology is capable of delivering just-in-time information within the `last mile' between the trailer and a desired location on the jobsite. This paper reports on a study which surveyed information needs at the jobsite, emerging wireless data communications technology, and assessed the extent to which wireless data technology can fulfill the information needs of the jobsite [J.M. de la Garza, I. Howitt, Wireless communication and computing at the jobsite, Research Report 136-11, Construction Industry Institute, Austin, TX, 1997]. We have organized jobsite information needs into the following ten categories: (a) requests for information, (b) materials management, (c) equipment management, (d) cost management, (e) schedule and means and methods, (f) jobsite record keeping, (g) submittals, (h) safety, (i) QC/QA, and (k) future trends. Each category was analyzed in terms of its appropriateness to take advantage of wireless technology. The four formats considered to transmit information wirelessly were: (a) live voice, (b) live video, (c) batched data, and (d) live data. Current wireless communication technology has been classified into the following five classes: (a) circuit-switched wireless data systems, (b) packet-switched wireless data systems––this class was further subdivided into specialized mobile radio systems and cellular digital packet data systems, (c) wireless local area networks, (d) paging systems, and (e) satellite-based data communications. A primer for wireless communications covering both fundamental and advanced communications concepts has also been included to enable a better understanding of the issues involved in making trade-offs while configuring a wireless jobsite communication system. The example presented in this paper shows how a contractor can define a subset of information needs by choosing from those already articulated herein and determine if a given wireless technology should even be considered as a viable way of meeting the information needs that such company has.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	6cb4
authors	Leupen, B., Grafe, C., Körnig, N., Lampe, M. and De Zeeuw, P.
year	1997
title	Design and Analysis
source	New York: Van Nostrand Reinhold
summary	Design and Analysis by Bernard Leupen, Christoph Grafe, Nicola Körnig, Marc Lampe, and Peter de Zeeuw Design and Analysis is an insightful, interdisciplinary exploration of the diversity of analytic methods used by architects, designers, urban planners, and landscape architects to understand the structure and principles of the built environment. Developed by a team headed by Bernard Leupen at Delft University of Technology, The Netherlands, Design and Analysis defies borders of history, geography, and discipline, tracing the evolution of design principles from ancient Greece to the 20th century. "Only methodical analysis gives us an insight into the design process," states architect Bernard Tschumi. Using historical examples from architecture, urban design, and landscape architecture, Design and Analysis defines an ordered system that enables the design student or professional to identify the factors that influence designers' decisions, and shows how to relate them to the finished project. Design and Analysis is organized into six chapters that correspond to these factors: order and composition, functionality, structure, typology, context, and analytical techniques. The authors introduce the analytical drawing as a time-tested means to obtaining insight into the design process. Over 100 line drawings are featured in all. Using contemporary architectural examples to teach ancient design principles, Design and Analysis is more than just an introduction to analytical methods. The authors give an outline of space design as a whole, from individual buildings to urban and landscape ensembles. Though primarily intended for design students to help them appreciate many of the issues that they will face as professionals, Design and Analysis's broad, easy-to-read approach makes it an invaluable handbook for designers of all disciplines.
series	other
last changed	2003/04/23 15:14

_id	0c4a
authors	Tonarelli, P., Ferries, B., Delaporte, J.L. and Tahon, C.
year	1997
title	Proposal of a product model for the building trade
source	Automation in Construction 5 (6) (1997) pp. 501-520
summary	Like other industries, the building trade has had to face up to economic crisis. It is crucial for all the interacting parties to design and achieve new practices and methods, allowing them to improve performances as well as the quality of the object to be built, while reducing the costs of building projects. To achieve this, a multiple evolution of the building trade is necessary: a technical evolution which defines a process for improving performances, an organisational evolution which better structures the building project procedure and improves communication between the actors, and finally a human evolution which increases the practical and theoretical background of the parties involved. The research of Laboratoire d'Automatique et de Mécanique Industrielle et Humaine, Université de Valenciennes, particularly concerns the last two points, and aims to define a complete methodology to apply a concurrent engineering approach to the building trade. This methodology includes three stages: the definition of a building project procedure which integrates a concurrent approach, the establishment of a product model; and the design of an integrated computer system for the building trade.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	f5ee
authors	Erhorn, H., De Boer, J. and Dirksmueller, M.
year	1997
title	ADELINE, an Integrated Approach to Lighting Simulation
source	Proceedings of Right Light 4, 4th European Conference on Energy-Efficient Lighting, pp.99-103
summary	The use of daylighting and artificial lighting simulation programs to calculate complex systems and models in the design practice often is impeded by the fact that the operation of these programs, especially the model input, is extremely complicated and time-consuming. Programs that are easier to use generally do not show the calculation capabilities required in practice. A second obstacle arises as the lighting calculations often do not allow any statements regarding the interactions with the energetic and thermal building performance. Both problems are mainly due to a lacking integration of the design tools of other building design practitioners as well as due to insufficient user interfaces. The program package ADELINE (Advanced Daylight and Electric Lighting Integrated New Environment) being available since May 1996 as completely revised version 2.0 presents a promising approach to solve these problems. This contribution describes the approaches and methods used within the international project IEA Task 21 for a further development of the ADELINE system. Aim of this work is a further improvement of user interfaces based on the inclusion of new dialogs and on a portation of the program system from MS-DOS to the Windows NT platform. Additional focus is laid on the use of recent developments in the field of information technology and experiences gained in other projects on integrated building design systems, like for example EU-COMBINE, in a pragmatical way. An integrated building design system with open standardized interfaces is to be achieved inter alia by using ISOSTEP formats, database technologies and a consequent, object-oriented design.
series	other
last changed	2003/04/23 15:50

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.2000.057
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	4bff
authors	Riegel, J.P., Schütze, M. and Zimmermann, G.
year	1997
title	Pattern-Based Generation of Customized, Flexible Building Simulators
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 285-298
summary	This paper describes a domain-specific software development method for the creation of building simulators. The method is based on object-oriented modeling, design patterns and code generation principles. The goal is to provide customizable building simulators that exactly simulate those physical effects an application demands. The numerical accuracy and different algorithms to be used can be tailored to the application's needs. By using object models and preconfigured design patterns, a well-structured simulator model can be created. From this model, the complete product code of a simulator is generated. The patterns help to develop a complete and correct model. Each pattern describes a certain functionality and knows how to generate code to implement this functionality.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	d910
authors	Kieferle, Joachim B. and Herzberger, Erwin
year	2002
title	The “Digital year for Architects” Experiences with an integrated teaching concept
doi	https://doi.org/10.52842/conf.ecaade.2002.088
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 88-95
summary	The “digital year for architects” is an integrated course for graduate architecture students, that has been held since 1997 at Stuttgart University. Its concept is to link together traditional design teaching and working with computers. Three seminars and one design project are the framework of the course, in which the students are taught in design of e.g. image and space composition, typography, video, using virtual reality, theoretical basics for the final design project like information management or working environments, approximately a dozen software packages and finally a visionary design project. It has shown that the advantage of an integrated course compared to separate courses is the more intensive dealing with the project as well as achieving better skills when learning the new media. Not only because the project topics are different from usual architecture and more abstract, the main effect is to widen the students way of thinking and designing.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ijac20031105
id	ijac20031105
authors	Kieferle, Joachim B.; Herzberger, Erwin
year	2003
title	The "Digital year for Architects" - Experiences with an Integrated Teaching Concept
source	International Journal of Architectural Computing vol. 1 - no. 1
summary	The "digital year for architects" is an integrated course for graduate architecture students that has been running since 1997, at Stuttgart University. Its concept is to link together traditional design teaching and working with computers. Three seminar classes and one design project form the framework of the course. In it the students are taught the design of, for example, image and space composition, typography, video, and using virtual reality. Additionally we cover theoretical basics for the final design project, such as information management or working environments. The course takes in approximately a dozen software packages and ends with a visionary design project. The products have shown the advantage of an integrated course compared to separate courses. The course proves to be more intensive in dealing with the project as well as achieving better skills when learning the associated new digital media. An important feature is that because the project topics are different from conventional architectural schemes, and tend to be more abstract, a key effect is to widen the students' way of thinking about designing.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	2653
authors	Kohler, N., Barth, B. Heitz, S. and Hermann, M.
year	1997
title	Life Cycle Models of Buildings - A New Approach
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 519-531
summary	The idea of life cycle cost was developed a quarter of a century ago. A wide dissemination of the term was given through a report for the US Secretary of Defense "Life Cycle Cost in Equipment Procuration". This report was followed by a series of guide lines in the defense field and later on in other government activities. The basic definition of life cycle costs is: "The sum of all costs incurred during the lifetime of an item, i.e. the total of procurement and ownership costs". There are several life cycle costs models available in literature. In the building field attempts have been made to introduce the notion of life cycle costs mainly through building surveys and for public owned buildings. Recorded data of construction, refurbishment and maintenance costs of buildings show that over a 50 year period the total costs amount to approximate twice the investment costs (without financial costs).
keywords	Life Cycle Costs, Life Cycle Impact Assessment, Product Models
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	751d
authors	Cubero, R., Caldera, N., Indriago, J.A., Camacaro, L., Nixon, M. and Cestary, J.
year	2001
title	Georeferenciando revicios y recursos turisticos para la plaificacion territorial: El Sigtur-Zulia [Georeferential Services and Touristic Resources for Territorial Planning: The Sigtur-Zulia]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 146-155
summary	In 1997, the Research Institute of Faculty of Architecture and Design, University of Zulia, started the R&D project of a decision making support system for tourism planning. For this, GIS technologies have been used for geocodification and spatial analysis of all the tourism facilities and resources existing in Zulia State, studying this kind of socioeconomic development according to critical poverty problems that are typical of their population. This paper describes this geographic information system, with the application of accessibility analysis, areas of influence, and threedimensional studies through network analysisó three-dimensional analysis with ArcView GIS clients, ArcExplorer clients, and MapObjects clients, on an MS Windows NT client/server environment.
keywords	GIS; Tourism Planning; Internet; Desktop Mapping
series	other
email
last changed	2003/02/14 08:29

_id	sigradi2007_af13
id	sigradi2007_af13
authors	Granero, Adriana Edith; Alicia Barrón; María Teresa Urruti
year	2007
title	Transformations in the educational system, Influence of the Digital Graph [Transformaciones en el sistema educacional, influencia de la Gráfica Digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 182-186
summary	The educative proposal was based on the summary attained through experiences piled up during the 2 last semester courses, 2/2006-1/2007. This proposal corresponds to a mix of methodology (by personal attendance / by internet). Founding on the Theory of the Game (Eric Berne 1960) and on different theories such as: Multiple intelligences (Haward Gardner 1983), Emotional Intelligence (Peter Salowey and John Mayer 1990, Goleman 1998), Social Intelligence (Goleman 2006), the Triarchy of Intelligence (Stemberg, R.J. 1985, 1997), “the hand of the human power”, it´s established that the power of the voice, that of the imagination, the reward, the commitment and association produce a significant increase of the productivity (Rosabeth Moss Kanter 2000), aside from the constructive processes of the knowledge (new pedagogical concepts constructivista of Ormrod J.E. 2003 and Tim O´Reilly 2004).
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	cc90
authors	Kolarevic, Branko
year	1998
title	CAD@HKU
doi	https://doi.org/10.52842/conf.acadia.1998.016
source	ACADIA Quarterly, vol. 17, no. 4, pp. 16-17
summary	Since 1993, we have experimented with Virtual Design Studios (VDS) as an on-going research project that investigates the combination of current computer-aided design (CAD), computer networks (Internet), and computer supported collaborative work (CSCW) techniques to bring together studentsat geographically distributed locations to work in a virtual atelier. In 1993 the theme of the first joint VDS project was in-fill housing for the traditional Chinese walled village of Kat Hing Wai in the New Territories north of Hong Kong, and our partners included MIT and Harvard in Boston (USA), UBC in Vancouver (Canada), and Washington University in St. Louis (USA). In 1994 we were joined by Cornell (USA) and Escola Tecnica Superior d’Arquitectura de Barcelona (Spain) to re-design Li Long housing in Shanghai, and 1995 added the Warsaw Institute of Technology (Poland) for the ACSA/Dupont competition to design a Center for Cultural and Religious Studies in Japan. The 1996 topic was an international competition to design a monument located in Hong Kong to commemorate the return of Hong Kong to Chinese sovereignty in 1997. Communication was via e-mail, the WorldWide Web with limited attempts at VRML, and network video. Several teaching and research experiments conducted through these projects have demonstrated the viability and potential of using electronic, telecommunications, and videoconferencing technologies in collaborative design processes. Results of these VDS have been presented at conferences worldwide, explained in journal papers and published in Virtual Design Studio, edited by J. Wojtowicz, published by HKU Press.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	20
authors	Cabezas, M., Mariano, C., MÌtolo, S., MuÒoz, P., Oliva, S. and Ortiz, M.
year	1998
title	Aportes a la EnseÒanza de la ComunicaciÛn Visual (Contributions to the Teaching of Visual Communication)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 168-173
summary	Going back to the proposal for the incorporation of multimid oriented towards the study of visual communication in 1st year of Architecture and Industrial Design which was presented on the 1st Seminary of Digital Graph that was held in 1997, in the FAU of UBA,it is being developed an educative programme of hypermedial character. Referring to Monge System development, it is though for the students so that they can consul and have a first contact with theoretical concepts. Through direct experience, starting from the studentís pre-existence of a lineal path from general to specific, proposing transversal perspective to start in depth conceptual contents according. Completing the traditional view of drawing by enlarging the iconicity and comprehension of a complex topic like geometry of the space.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	567d
authors	Farrag, C., Pinna Braga, F. and Teixeira, P.
year	2000
title	Investigação de Metodologia de Ensino de Informática Aplicada à Arquitetura (Research on the Methodology for Teaching Computer Applications in Architecture)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 347-349
summary	Description of class research from 1997-2 to 2000-1 in “Applied Computing in Architecture” conducted in the sixth semester of the Architecture Program at Faculdade de Belas Artes de São Paulo. The study is intended to analyze, evaluate and discover new paradigms in the introduction/application of class methodologies of teaching the use of computer in the design process. Our intention is to verify the students natural understanding of the principles of 3D digital modeling by introducing new tools for defining space and form, using the computer as a communication/representation system, and not only as a mimetized production tool. The challenge was to find a natural syntony between the digital projectual process and the learning process. At the end of each semester we evaluated the results and redirected the class proposals.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	8504
authors	Junge, Richard. (Ed.)
year	1997
title	CAAD futures 1997 [Conference Proceedings]
source	7th International Conference on Computer-Aided Architectural Design/ ISBN 0-7923-4726-9 / München / Germany, 4-6 August 1997, 931 p.
summary	Since the establishment of the CAAD futures Foundation in 1985 CAAD experts from all over the world meet every two years to present and at the same time document the state of art of research in Computer Aided Architectural Design. The history of CAAD futures started in the Netherlands at the Technical Universities of Eindhoven and Delft, where the CAAD futures Foundation came into being. Then CAAD futures crossed the oceans for the first time, the third CAAD futures in '89 was held at Harvard University. Next stations in the evolution where in '91 Swiss Federal Institute of Technology, the ETH Zürich. In '93 the conference was organized by Carnegie Mellon University, Pittsburgh and in '95 by National University Singapore. CAAD futures '95 marked the world wide nature by organizing it for the first time in Asia. The seventh CAAD futures is the first being organized by a German University. For the as small as newly and only provisional established CAAD group at the Faculty for Architecture at Technical University München it is honor and challenge at the same time to be the organizer of CAAD futures '97.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	629a
authors	Brunetta, Vincent
year	1997
title	EXPLORER A Procedural Modeler Based on Architectural Knowledge
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 125-133
summary	Cet article est consacré à la modélisation procédurale de configurations architecturales. Les outils de CAO actuels reproduisent et figent la pratique traditionelle du projet architectural, leurs modèles de représentation sous-jacents sont considérablement éloignés de la représentation usuelle de l'objet architectural. Il nous apparaît que les modes d'accès et de constitution "alternatifs" du modèle informatique (description textuelle et modélisation procédurale) représentent un champ d'expérimentation privilégié susceptible de questionner ces problèmes de représentation du savoir architectural. Nous commencerons par l'examen de modélisations par description textuelle (notamment de façades néoclassiques et de l'architecture palladienne) pour ensuite nous intéresser à une série de modélisations procédurales à base de connaissances architecturales. Nous verrons enfin comment cette réflexion, dans un cadre pédagogique, confronte nos étudiants à la fois à l'analyse architecturale, à une approche de la programmation structurée ou orientée-objet ainsi qu'à une utilisation "critique" des outils de conception assistée.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: