Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 521

Reformat results as: short short into frame detailed detailed into frame

_id	9824
authors	Etzion, Y., Pearlmutter, D., Erell, E. and Meir, I.A.
year	1997
title	Adaptive architecture: integrating low-energy technologies for climate control in the desert
source	Automation in Construction 6 (5-6) (1997) pp. 417-425
summary	The article describes a `climatically adaptive' approach to intelligent building in which a variety of technologies are integrated in the architectural design to provide thermal comfort with a minimal expenditure of energy. This concept is illustrated by the design of the Blaustein International Center for Desert Studies, a multi-use complex completed recently at the Sede-Boker Campus of Ben-Gurion University of the Negev. In response to the local climate of this desert region, a number of strategies were developed by the authors to exploit natural energy for heating and cooling: earth berming of major parts of the building, 'selective glazing' for seasonal shading and energy collection, a down-draft 'cool-tower' for evaporative cooling and a hybrid mechanism for hot-air supply are several of the unique systems whose performance and feasibility are analyzed within the context of the overall building design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	diss_marsh
id	diss_marsh
authors	Marsh, A.J.
year	1997
title	Performance Analysis and Conceptual Design
source	School of Architecture and Fine Arts, University of Western Australia
summary	A significant amount of the research referred to by Manning has been directed into the development of computer software for building simulation and performance analysis. A wide range of computational tools are now available and see relatively widespread use in both research and commercial applications. The focus of development in this area has long been on the accurate simulation of fundamental physical processes, such as the mechanisms of heat flow though materials, turbulent air movement and the inter-reflection of light. The adequate description of boundary conditions for such calculations usually requires a very detailed mathematical model. This has tended to produce tools with a very engineering-oriented and solution-based approach. Whilst becoming increasingly popular amongst building services engineers, there has been a relatively slow response to this technology amongst architects. There are some areas of the world, particularly the UK and Germany, where the use of such tools on larger projects is routine. However, this is almost exclusively during the latter stages of a project and usually for purposes of plant sizing or final design validation. The original conceptual work, building form and the selection of materials being the result of an aesthetic and intuitive process, sometimes based solely on precedent. There is no argument that an experienced designer is capable of producing an excellent design in this way. However, not all building designers are experienced, and even fewer have a complete understanding of the fundamental physical processes involved in building performance. These processes can be complex and often highly inter-related, often even counter-intuitive. It is the central argument of this thesis that the needs of the building designer are quite different from the needs of the building services engineer, and that existing building design and performance analysis tools poorly serve these needs. It will be argued that the extensive quantitative input requirement in such tools acts to produce a psychological separation between the act of design and the act of analysis. At the conceptual stage, building geometry is fluid and subject to constant change, with solid quantitative information relatively scarce. Having to measure off surface areas or search out the emissivity of a particular material forces the designer to think mathematically at a time when they are thinking intuitively. It is, however, at this intuitive stage that the greatest potential exists for performance efficiencies and environmental economies. The right orientation and fenestration choice can halve the airconditioning requirement. Incorporating passive solar elements and natural ventilation pathways can eliminate it altogether. The building form can even be designed to provide shading using its own fabric, without any need for additional structure or applied shading. It is significantly more difficult and costly to retrofit these features at a later stage in a project’s development. If the role of the design tool is to serve the design process, then a new approach is required to accommodate the conceptual phase. This thesis presents a number of ideas on what that approach may be, accompanied by some example software that demonstrates their implementation.
series	thesis:PhD
more	http://www.squ1.com/site.html
last changed	2003/11/28 07:33

_id	2e5a
authors	Matsumoto, N. and Seta, S.
year	1997
title	A history and application of visual simulation in which perceptual behaviour movement is measured.
source	Architectural and Urban Simulation Techniques in Research and Education [3rd EAEA-Conference Proceedings]
summary	For our research on perception and judgment, we have developed a new visual simulation system based on the previous system. Here, we report on the development history of our system and on the current research employing it. In 1975, the first visual simulation system was introduced, witch comprised a fiberscope and small-scale models. By manipulating the fiberscope's handles, the subject was able to view the models at eye level. When the pen-size CCD TV camera came out, we immediately embraced it, incorporating it into a computer controlled visual simulation system in 1988. It comprises four elements: operation input, drive control, model shooting, and presentation. This system was easy to operate, and the subject gained an omnidirectional, eye-level image as though walking through the model. In 1995, we began developing a new visual system. We wanted to relate the scale model image directly to perceptual behavior, to make natural background images, and to record human feelings in a non-verbal method. Restructuring the above four elements to meet our equirements and adding two more (background shooting and emotion spectrum analysis), we inally completed the new simulation system in 1996. We are employing this system in streetscape research. Using the emotion spectrum system, we are able to record brain waves. Quantifying the visual effects through these waves, we are analyzing the relation between visual effects and physical elements. Thus, we are presented with a new aspect to study: the relationship between brain waves and changes in the physical environment. We will be studying the relation of brain waves in our sequential analysis of the streetscape.
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	ac52
authors	Shih, Naai-Jung and Yan, Chie-Shan
year	1997
title	A Study of the Location of Fire Egress Signs by VR Simulation
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 311-316
summary	The purpose of this paper is to present a suggestion for the location of fire egress signs along a corridor in a building. The suggestion is made based on a virtual reality simulation of human behavior while rooms are on fire, particularly in a public Karaoka TV entertainment center (KTV). Both the rooms and smoke were modeled to simulate similar situations in which people were asked to find their routes to an egress. Case studies were made of the occurrence of two local severe fire disasters, the official investigation of damages, and related building codes. The simulation concluded that the traditional designation of egress signs at a higher location or just above the door frame may be not function appropriately in indicating the location of exit in case of fire. Since smoke is usually lighter than air and is accumulated closer to the ceiling level, either human vision or egress signs are very likely to be blocked by the darkness of smoke. Vision is additionally restricted because people are suggested to lower their body position to avoid smoke while escaping. Suggestion of alternate location of signage is also made in the research.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	d97a
authors	Arkin, H.
year	1997
title	Introduction
source	Automation in Construction 6 (5-6) (1997) pp. 379-380
summary	The term ‚Intelligenz Vuilding‘ is not any longer a mere slogan used by smart salesmen of commercial and / or office buildings. During recent years it has come to describe a broad engineering concept for building design, construcions and operation, the realization of which challenges architects and engineers involved in the various aspects of building industry. The concept empasizes a multidisciplinary effort to integrate and potimize the building strctures, systems , services and management in order to create a productive and responsive environment for teh building occupant, in a cost-effective manner.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	c531
authors	Becker, R.
year	1997
title	Performance evaluation of an intelligent hybrid floor-collector system
source	Automation in Construction 6 (5-6) (1997) pp. 427-436
summary	The paper presents the intelligent features of a hybrid floor-slab/wall-air-collector system, that is being developed at the Fraunhofer Institut für Bauphysik, and was analyzed by the author. The system can be identified as an intelligent system for "truly intelligent" buildings, namely, a sub-system that integrates the building fabric and the interior temperature control system to produce an automatically controlled environment, that improves comfort while saving energy.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	472d
authors	Burry, Mark and Murray, Zolna
year	1997
title	Architectural Design Based on Parametric Variation and Associative Geometry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.h5q
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper considers the role of the computer for detailed design within the wider architectural design process. The central proposition is that parametric modelling software is invaluable for both preliminary and developed design where there is a need for the definition, manipulation and visualisation of complex geometry. The paper begins with a definition of 'parametric design' followed by a consideration of its potential to assist or hinder the designer. A worked example will demonstrate how the elements that make up a model can be referenced to each other using a number of clearly defined constraints, the completed model being changed, modified and regenerated while conforming to pre-set conditions. This will be followed by a report on research into the implications of parametric design modelling applied retrospectively to Jørn Utzon's documented design process for the Sydney Opera House. The study analyses how conventional modelling coped with the manipulation of these forms and compares this with the potential of computer-aided iterative design refinement.
keywords	Architectural Design, Geometry, Parametric Variation
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/burry/default.htm
last changed	2022/06/07 07:50

_id	00e7
authors	Bushby, S.T.
year	1997
title	BACnetTM: a standard communication infrastructure for intelligent buildings
source	Automation in Construction 6 (5-6) (1997) pp. 529-540
summary	Intelligent buildings require integration of a variety of computer-based building automation and control system products that are usually made by different manufacturers. The exchange of information among these devices is critical to the successful operation of the building systems. Proprietary approaches to providing this communication have created great challenges for system integrators and hampered the development of intelligent building technology. Even though digital automation and control technology has been widely available for more than a decade and islands of automation are common, intelligent buildings with integrated building services are still more of a promise than a reality. BACnetTM is a standard communication protocol for building automation and control networks developed by the American Society of Heating, Refrigerating and Air-conditioning Engineers (ASHRAE, Standard 135-1995: BACnetTM--A Data Communication Protocol for Building Automation and Control Networks. American Society of Heating, Refrigerating, and Air-conditioning Engineers. Atlanta, Georgia, USA, 1995). BACnetTM provides the communication infrastructure needed to integrate products made by different vendors and to integrate building services that are now independent. This paper describes the main features of the BACnetTM protocol and early experience implementing it.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	20
authors	Cabezas, M., Mariano, C., MÌtolo, S., MuÒoz, P., Oliva, S. and Ortiz, M.
year	1998
title	Aportes a la EnseÒanza de la ComunicaciÛn Visual (Contributions to the Teaching of Visual Communication)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 168-173
summary	Going back to the proposal for the incorporation of multimid oriented towards the study of visual communication in 1st year of Architecture and Industrial Design which was presented on the 1st Seminary of Digital Graph that was held in 1997, in the FAU of UBA,it is being developed an educative programme of hypermedial character. Referring to Monge System development, it is though for the students so that they can consul and have a first contact with theoretical concepts. Through direct experience, starting from the studentís pre-existence of a lineal path from general to specific, proposing transversal perspective to start in depth conceptual contents according. Completing the traditional view of drawing by enlarging the iconicity and comprehension of a complex topic like geometry of the space.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	e292
authors	Charitos, D. and Bridges, A.H.
year	1997
title	On Architectural Design of Virtual Environments
source	Design Studies, Vol.18, No. 2, 143-154
summary	This paper considers the domains of architectural design and film theory for the purpose of informing the design of virtual environments (VEs). It is suggested that these domains may form a background for the consideration of possible metaphors for the design of VEs. Firstly, the paper investigates the relation between architecture and virtual reality technology, through the nature of drawings and virtual environments as means of representing three-dimensional spaces. Then, differences between VEs and physical environments (PEs) are identified for the purpose of understanding the intrinsic nature of VEs, by comparing them to our familiar everyday spatial experience. This step is considered essential in helping us understand how we might be able to develop an architectural conception of designing spaces, in the context of VEs. The paper then presents two directions towards informing VE design by means of theoretical and practical architectural design knowledge. Finally, the use of film-related studies is considered as a means of enhancing our conception of time and movement in VEs.
series	journal paper
email
last changed	2003/04/23 15:50

_id	c1ad
authors	Cheng, Nancy Yen-wen
year	1997
title	Teaching CAD with Language Learning Methods
doi	https://doi.org/10.52842/conf.acadia.1997.173
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 173-188
summary	By looking at computer aided design as design communication we can use pedagogical methods from the well-developed discipline of language learning. Language learning breaks down a complex field into attainable steps, showing how learning strategies and attitudes can enhance mastery. Balancing the linguistic emphases of organizational analysis, communicative intent and contextual application can address different learning styles. Guiding students in learning approaches from language study will equip them to deal with constantly changing technology. From overall curriculum planning to specific exercises, language study provides a model for building a learner-centered education. Educating students about the learning process, such as the variety of metacognitive, cognitive and social/affective strategies can improve learning. At an introductory level, providing a conceptual framework and enhancing resource-finding, brainstorming and coping abilities can lead to threshold competence. Using kit-of-parts problems helps students to focus on technique and content in successive steps, with mimetic and generative work appealing to different learning styles. Practicing learning strategies on realistic projects hones the ability to connect concepts to actual situations, drawing on resource-usage, task management, and problem management skills. Including collaborative aspects in these projects provides the motivation of a real audience and while linking academic study to practical concerns. Examples from architectural education illustrate how the approach can be implemented.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	7ebf
authors	Clark, G. and Mehta, P.
year	1997
title	Artificial intelligence and networking in integrated building management systems
source	Automation in Construction 6 (5-6) (1997) pp. 481-498
summary	In recent years the emphasis has moved towards integrating all a building's systems via centralised building management systems (BMS). To provide a more intelligent approach to the facility management, safety and energy control in building management systems (IBMS), this paper proposes a methodology for integrating the data within a BMS via a single multi-media networking technology and providing the BMS with artificial intelligence (AI) through the use of knowledge-based systems (KBS) technology. By means of artificial intelligence, the system is capable of assessing, diagnosing and suggesting the best solution. This paper outlines how AI techniques can enhance the control of HVAC systems for occupant comfort and efficient running costs based on occupancy prediction. Also load control and load balancing are investigated. Instead of just using pre-programmed load priorities, this work has investigated the use of a dynamic system of priorities which are based on many factors such as area usage, occupancy, time of day and real time environmental conditions. This control strategy which is based on a set of rules running on the central control system, makes use of information gathered from outstations throughout the building and communicated via the building's data-bus.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	sigradi2009_774
id	sigradi2009_774
authors	de Souza, Raphael Argento; André Soares Monat
year	2009
title	Visualização da Informação em meio telejornalístico: Uma abordagem sob a ótica do design [Information Visualization in the news television: An approach under the design sight]
source	SIGraDi 2009 - Proceedings of the 13th Congress of the Iberoamerican Society of Digital Graphics, Sao Paulo, Brazil, November 16-18, 2009
summary	This article proposes a classification, under the Visualization Information point of view, of infographics broadcasted in the brazilian news television. To achieve this purpose these so called motion graphics were analised under the basis formed by three main authors: Tufte (1997), Bertin (1977) and Spence (2007), whose theories are in this article compared to the digital means of the motion graphics. With these theoretical foundation and the analisys of two hundred motion graphics broadcasted in the brazilian news television, we achieved a classification which covers every type of these motion graphics, hoping it becomes a basis for the study of these projects.
keywords	Design; information visualization; television infographics, motion graphics; information design
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	567d
authors	Farrag, C., Pinna Braga, F. and Teixeira, P.
year	2000
title	Investigação de Metodologia de Ensino de Informática Aplicada à Arquitetura (Research on the Methodology for Teaching Computer Applications in Architecture)
source	SIGraDi’2000 - Construindo (n)o espacio digital (constructing the digital Space) [4th SIGRADI Conference Proceedings / ISBN 85-88027-02-X] Rio de Janeiro (Brazil) 25-28 september 2000, pp. 347-349
summary	Description of class research from 1997-2 to 2000-1 in “Applied Computing in Architecture” conducted in the sixth semester of the Architecture Program at Faculdade de Belas Artes de São Paulo. The study is intended to analyze, evaluate and discover new paradigms in the introduction/application of class methodologies of teaching the use of computer in the design process. Our intention is to verify the students natural understanding of the principles of 3D digital modeling by introducing new tools for defining space and form, using the computer as a communication/representation system, and not only as a mimetized production tool. The challenge was to find a natural syntony between the digital projectual process and the learning process. At the end of each semester we evaluated the results and redirected the class proposals.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	c557
authors	Fuchs, W. and Martinico, A.
year	1997
title	The V.C.net--A digital study in architecture
source	Automation in Construction 6 (4) (1997) pp. 335-339
summary	The V.C.net project is an Internet-based educational and communication tool for the architectural community. Its goal is to encourage students from architecture programs across the country and around the world to examine problems and collaborate in the exploration of ideas through the World Wide Web. The central concept of the project involves the creation of a simulated, vital urban environment constructed from various forms of digital data. This `virtual city' will be comprised of projects executed by students of architecture and urban design in US and abroad. Projects will be proposed for specific sites and will reflect real-world questions as they are mirrored in the virtual world. The city exists as a heuristic tool and is not intended as a copy of any existing human habitat. The ultimate goal of the project is to create a dynamic platform to study the interrelationship of various forces effecting urban development: architecture, planning, civil engineering, economics, social sciences, etc. The project originates at the School of Architecture of the University of Detroit Mercy and is intended to be truly interdisciplinary.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: