Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 518

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	2653
authors	Kohler, N., Barth, B. Heitz, S. and Hermann, M.
year	1997
title	Life Cycle Models of Buildings - A New Approach
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 519-531
summary	The idea of life cycle cost was developed a quarter of a century ago. A wide dissemination of the term was given through a report for the US Secretary of Defense "Life Cycle Cost in Equipment Procuration". This report was followed by a series of guide lines in the defense field and later on in other government activities. The basic definition of life cycle costs is: "The sum of all costs incurred during the lifetime of an item, i.e. the total of procurement and ownership costs". There are several life cycle costs models available in literature. In the building field attempts have been made to introduce the notion of life cycle costs mainly through building surveys and for public owned buildings. Recorded data of construction, refurbishment and maintenance costs of buildings show that over a 50 year period the total costs amount to approximate twice the investment costs (without financial costs).
keywords	Life Cycle Costs, Life Cycle Impact Assessment, Product Models
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	dfaf
authors	Ataman, Osman
year	2000
title	Some Experimental Results in the Assessment of Architectural Media
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 163-171
doi	https://doi.org/10.52842/conf.acadia.2000.163
summary	The relationship between the media and architectural design can be an important factor and can influence the design outcome. However, the nature, direction and magnitude of this relationship are unknown. Consequently, there have been many speculative claims about this relationship and almost none of them are supported with empirical research studies. In order to investigate these claims and to provide a testable framework for their potential contributions to architectural education, this study aims to explore the effects of media on architectural design. During 1995-1997, a total of 90 students enrolling in First Year Design Studio and Introduction to Computing classes at Georgia Tech participated in the study. A set of quantitative measures was developed to assess the differences between the two media and the effects on the architectural design. The results suggested that media influenced certain aspects of students’ designs. It is concluded that there is a strong relationship between the media and architectural design. The type of media not only changes some quantifiable design parameters but also affects the quality of design.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2342
authors	Chiu, Mao-Lin and Shih, Shen-Guan
year	1997
title	Analogical Reasoning and Case Adaptation in Architectural Design: Computers Vs. Human Designers
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 787-800
summary	This paper depicts the studies of the differences between human designers and computers in analogical reasoning and case adaptation. Four design experiments are undertaken to examine how designers conduct case-based design, apply dimensional and topological adaptation. The paper also examines the differences of case adaptation by novice and experienced designers, and between human judgement in case adaptation and the evaluation mechanism by providing similarity assessment. In conclusion, this study provides the comparative analysis from the above observation and implications on the development of case-based reasoning systems for designers.
keywords	Case-based Reasoning, Analogical Reasoning, Case Adaptation, Computer-Aided Architectural Design
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4a30
authors	Chiu, Mao-Lin
year	1997
title	Analogical Reasoning in Architectural Design: Comparison of Human Designers and Computers in Case Adaptation
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 205-215
doi	https://doi.org/10.52842/conf.caadria.1997.205
summary	Design cases were considered as the design solution or condensed knowledge of design experience. In the analogical reasoning process, case adaptation is the fundamental task for solving the problem. This paper is aimed to study the difference between human designers and computers in case adaptation. Two design experiments are undertaken for examining how designers apply dimensional and topological adaptation, exploring the difference of case adaptation by novice and experienced designers, and examining the difference between human judgement in case adaptation and the evaluation mechanism by providing similarity assessment. In conclusion, this study provides the comparative analysis from the above observation and implications on the development of case-based reasoning systems for designers.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	6594
authors	Emdanat, Samir S and Vakalo, Emmanuel G.
year	1997
title	SHAPE GRAMMARS: AN ASSESSMENT OF THEIR UTILITY IN ARCHITECTURE
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 313-321
doi	https://doi.org/10.52842/conf.caadria.1997.313
summary	Shape grammars are generative formalisms that allow spatial computations to be carried out on shapes. This paper examines the assumptions, methodologies, and formalisms underlying shape grammar research in relation to architectural form and its making. The paper first establishes the criteria for evaluating the adequacy of a given generative system. Then, it applies them to the evaluation of the shape grammar formalism. Issues of the representation of style and language, procedural and declarative knowledge representation, as well as, the specificity and generalizability of the formalism will be addressed. The paper argues that, in its present state, shape grammar leaves a great deal to be desired in terms of its descriptive power and generalizability. The paper concludes by exploring some of the desired characteristics for languages of architectural form.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:55

_id	ddss9837
id	ddss9837
authors	Liu, Yu-Tung and Bai, Rui-Yuan
year	1998
title	The roles of virtual reality, image processing, and multimedia in thedesign of public spaces: 1997 Hsinchu Project
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper examines the procedure of visual impact analysis and assessment proposed by Rahman and reviews the use of CAD applications in urban projects in the real world. A preliminary computerized procedure for visual impact analysis and assessment is proposed. An experiments wasconducted in our laboratory to verify the preliminary procedure. In order to further study the revised procedure in real urban projects, it was also applied into the renew project of The Eastern Gate Plaza located in the center of city Hsinchu, Taiwan from 1996 to 1998. According to several face-to-face discussions with Hsinchu habitants, government officials, and professional designers, a final computerized procedure for visual impact analysis and assessment is concluded.
series	DDSS
last changed	2003/08/07 16:36

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	c14d
authors	Silva, Neander
year	1997
title	Artificial Intelligence and 3D Modelling Exploration: An Integrated Digital Design Studio
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.l5p
summary	This paper describes a CAAD teaching strategy in which some Artificial Intelligence techniques are integrated with 3D modelling exploration. The main objective is to lead the students towards "repertoire" acquisition and creative exploration of design alternatives. This strategy is based on dialogue emulation, graphic precedent libraries, and 3D modelling as a medium of design study. The course syllabus is developed in two parts: a first stage in which the students interact with an intelligent interface that emulates a dialogue. This interface produces advice composed of either precedents or possible new solutions. Textual descriptions of precedents are coupled with graphical illustrations and textual descriptions of possible new solutions are coupled with sets of 3D components. The second and final stage of the course is based on 3D modelling, not simply as a means of presentation, but as a design study medium. The students are then encouraged to get the system’s output from the first stage of the course and explore it graphically. This is done through an environment in which modelling in 3D is straightforward allowing the focus to be placed on design exploration rather than simply on design presentation. The students go back to the first stage for further advice depending on the results achieved in the second stage. This cycle is repeated until the design solution receives a satisfactory assessment.
keywords	Education, Design Process, Interfaces, Neural Networks, 3D Modelling
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/silva/silva.htm
last changed	2022/06/07 07:50

_id	bca5
authors	Slaughter, E.S.
year	1997
title	Characteristics of existing construction automation and robotics technologies
source	Automation in Construction 6 (2) (1997) pp. 109-120
summary	As a first step in detailed assessment, this research analyzes selected attributes of 85 existing construction automation and robotics technologies to examine certain trends in the development of construction technologies and the attributes of the technologies which can influence their use by construction companies. In general, previously identified priorities for automation are close to being fulfilled, and correspond with opportunities for adoption. Most of the technologies concentrate on areas of identified benefits, and attempt to reduce the complexity associated with adoption through only minimal changes in tasks. In the same way, complementary changes required to use the technologies are kept at a minimum overall. This analysis is used to identify further opportunities for the development and implementation of construction automation and robotics technologies.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	acadia03_022
id	acadia03_022
authors	Anders, Peter
year	2003
title	Towards Comprehensive Space: A context for the programming/design of cybrids
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 161-171
doi	https://doi.org/10.52842/conf.acadia.2003.161
summary	Cybrids have been presented as mixed realities: spatial, architectural compositions comprised of physical and cyberspaces (Anders 1997). In order to create a rigorous approach to the design of architectural cybrids, this paper offers a model for programming their spaces. Other than accepting cyberspaces as part of architecture’s domain, this approach is not radical. Indeed, many parts of program development resemble those of conventional practice. However, the proposition that cyberspaces should be integrated with material structures requires that their relationship be developed from the outset of a project. Hence, this paper provides a method for their integration from the project’s earliest stages, the establishment of its program. This study for an actual project, the Planetary Collegium, describes a distributed campus comprising buildings and cyberspaces in various locales across the globe. The programming for these cybrids merges them within a comprehensive space consisting not only of the physical and cyberspaces, but also in the cognitive spaces of its designers and users.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	a93b
authors	Anders, Peter
year	1997
title	Cybrids: Integrating Cognitive and Physical Space in Architecture
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 17-34
doi	https://doi.org/10.52842/conf.acadia.1997.017
summary	People regularly use non-physical, cognitive spaces to navigate and think. These spaces are important to architects in the design and planning of physical buildings. Cognitive spaces inform design - often underlying principles of architectural composition. They include zones of privacy, territory and the space of memory and visual thought. They let us to map our environment, model or plan projects, even imagine places like Heaven or Hell. Cyberspace is an electronic extension of this cognitive space. Designers of virtual environments already know the power these spaces have on the imagination. Computers are no longer just tools for projecting buildings. They change the very substance of design. Cyberspace is itself a subject for design. With computers architects can design space both for physical and non-physical media. A conscious integration of cognitive and physical space in architecture can affect construction and maintenance costs, and the impact on natural and urban environments. This paper is about the convergence of physical and electronic space and its potential effects on architecture. The first part of the paper will define cognitive space and its relationship to cyberspace. The second part will relate cyberspace to the production of architecture. Finally, a recent project done at the University of Michigan Graduate School of Architecture will illustrate the integration of physical and cyberspaces.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	2dc0
authors	Arkin, H. and Paciuk, M.
year	1997
title	Evaluating intelligent buildings according to level of service systems integration
source	Automation in Construction 6 (5-6) (1997) pp. 471-479
summary	The intelligent building is supposed to provide the environment and means for an optimal utilization of the building, according to its designation. This extended function of a building can be achieved only by means of an extensive use of building service systems, such as HVAC; electric power; communication; safety and security; transportation; sanitation, etc. Building intelligence is not related to the sophistication of service systems in a building, but rather to the integration among the various service systems, and between the systems and the building structure. Systems' integration can be accomplished through teamwork planning of the building, starting at the initial design stages of the building. This paper examines some existing buildings claimed to be "intelligent", according to their level of systems' integration.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	d97a
authors	Arkin, H.
year	1997
title	Introduction
source	Automation in Construction 6 (5-6) (1997) pp. 379-380
summary	The term ‚Intelligenz Vuilding‘ is not any longer a mere slogan used by smart salesmen of commercial and / or office buildings. During recent years it has come to describe a broad engineering concept for building design, construcions and operation, the realization of which challenges architects and engineers involved in the various aspects of building industry. The concept empasizes a multidisciplinary effort to integrate and potimize the building strctures, systems , services and management in order to create a productive and responsive environment for teh building occupant, in a cost-effective manner.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	8ec9
authors	Asanowicz, Alexander
year	1997
title	Incompatible Pencil - Chance for Changing in Design Process
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 93-101
summary	The existing Caad systems limit designers creativity by constraining them to work with prototypes provided by the system's knowledge base. Most think of computers as drafting machines and consider CAAD models as merely proposals for future buildings. But this kind of thinking (computers as simple drafting machines) seems to be a way without future. New media demands new process and new process demands new media. We have to give some thougt to impact of CAAD on the design process and in which part of it CAAD can add new value. In this paper there will be considered two ways of using of computers. First - creation of architectural form in an architect's mind and projects visualisation with using renderings, animation and virtual reality. In the second part - computer techniques are investigated as a medium of creation. Unlike a conventional drawing the design object within computer has a life of its own. In computer space design and the final product are one. Computer creates environments for new kind of design activities. In fact, many dimensions of meaning in cyberspace have led to a cyberreal architecture that is sure to have dramatic consequences for the profession.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	c531
authors	Becker, R.
year	1997
title	Performance evaluation of an intelligent hybrid floor-collector system
source	Automation in Construction 6 (5-6) (1997) pp. 427-436
summary	The paper presents the intelligent features of a hybrid floor-slab/wall-air-collector system, that is being developed at the Fraunhofer Institut für Bauphysik, and was analyzed by the author. The system can be identified as an intelligent system for "truly intelligent" buildings, namely, a sub-system that integrates the building fabric and the interior temperature control system to produce an automatically controlled environment, that improves comfort while saving energy.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	536e
authors	Bouman, Ole
year	1997
title	RealSpace in QuickTimes: architecture and digitization
source	Rotterdam: Nai Publishers
summary	Time and space, drastically compressed by the computer, have become interchangeable. Time is compressed in that once everything has been reduced to 'bits' of information, it becomes simultaneously accessible. Space is compressed in that once everything has been reduced to 'bits' of information, it can be conveyed from A to B with the speed of light. As a result of digitization, everything is in the here and now. Before very long, the whole world will be on disk. Salvation is but a modem away. The digitization process is often seen in terms of (information) technology. That is to say, one hears a lot of talk about the digital media, about computer hardware, about the modem, mobile phone, dictaphone, remote control, buzzer, data glove and the cable or satellite links in between. Besides, our heads are spinning from the progress made in the field of software, in which multimedia applications, with their integration of text, image and sound, especially attract our attention. But digitization is not just a question of technology, it also involves a cultural reorganization. The question is not just what the cultural implications of digitization will be, but also why our culture should give rise to digitization in the first place. Culture is not simply a function of technology; the reverse is surely also true. Anyone who thinks about cultural implications, is interested in the effects of the computer. And indeed, those effects are overwhelming, providing enough material for endless speculation. The digital paradigm will entail a new image of humankind and a further dilution of the notion of social perfectibility; it will create new notions of time and space, a new concept of cause and effect and of hierarchy, a different sort of public sphere, a new view of matter, and so on. In the process it will indubitably alter our environment. Offices, shopping centres, dockyards, schools, hospitals, prisons, cultural institutions, even the private domain of the home: all the familiar design types will be up for review. Fascinated, we watch how the new wave accelerates the process of social change. The most popular sport nowadays is 'surfing' - because everyone is keen to display their grasp of dirty realism. But there is another way of looking at it: under what sort of circumstances is the process of digitization actually taking place? What conditions do we provide that enable technology to exert the influence it does? This is a perspective that leaves room for individual and collective responsibility. Technology is not some inevitable process sweeping history along in a dynamics of its own. Rather, it is the result of choices we ourselves make and these choices can be debated in a way that is rarely done at present: digitization thanks to or in spite of human culture, that is the question. In addition to the distinction between culture as the cause or the effect of digitization, there are a number of other distinctions that are accentuated by the computer. The best known and most widely reported is the generation gap. It is certainly stretching things a bit to write off everybody over the age of 35, as sometimes happens, but there is no getting around the fact that for a large group of people digitization simply does not exist. Anyone who has been in the bit business for a few years can't help noticing that mum and dad are living in a different place altogether. (But they, at least, still have a sense of place!) In addition to this, it is gradually becoming clear that the age-old distinction between market and individual interests are still relevant in the digital era. On the one hand, the advance of cybernetics is determined by the laws of the marketplace which this capital-intensive industry must satisfy. Increased efficiency, labour productivity and cost-effectiveness play a leading role. The consumer market is chiefly interested in what is 'marketable': info- and edutainment. On the other hand, an increasing number of people are not prepared to wait for what the market has to offer them. They set to work on their own, appropriate networks and software programs, create their own domains in cyberspace, domains that are free from the principle whereby the computer simply reproduces the old world, only faster and better. Here it is possible to create a different world, one that has never existed before. One, in which the Other finds a place. The computer works out a new paradigm for these creative spirits. In all these distinctions, architecture plays a key role. Owing to its many-sidedness, it excludes nothing and no one in advance. It is faced with the prospect of historic changes yet it has also created the preconditions for a digital culture. It is geared to the future, but has had plenty of experience with eternity. Owing to its status as the most expensive of arts, it is bound hand and foot to the laws of the marketplace. Yet it retains its capacity to provide scope for creativity and innovation, a margin of action that is free from standardization and regulation. The aim of RealSpace in QuickTimes is to show that the discipline of designing buildings, cities and landscapes is not only a exemplary illustration of the digital era but that it also provides scope for both collective and individual activity. It is not just architecture's charter that has been changed by the computer, but also its mandate. RealSpace in QuickTimes consists of an exhibition and an essay.
series	other
email
last changed	2003/04/23 15:14

_id	ccc0
authors	Braithwaite, G., Radford, A., Huang, E. , Chang, T.W., Jones, D., Woodbury, R. and Sweeting, R.
year	1997
title	The Computer Modeling of Development Proposals: A Routine Part of Development Control
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 123-132
doi	https://doi.org/10.52842/conf.caadria.1997.123
summary	This paper describes and discusses the aims and practicalities involved in the computer modeling of contentious development applications becoming accepted as a routine part of the processes of development control. It uses three case studies drawn from the University of Adelaide’s work with the City of Adelaide in Australia to delineate the role of 3D computer models of proposed new buildings and their immediate surroundings in the public understanding of the streetscape, neighbourhood context, overshadowing and overlooking implications of the proposals.
keywords	3D City Modeling
series	CAADRIA
last changed	2022/06/07 07:54

For more results click below: