Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 521

Reformat results as: short short into frame detailed detailed into frame

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	4983
authors	Cutting-Decelle, A.-F., Dubois, A.-M. and Fernandez, I.
year	1997
title	Management and Integration of Product Information in Construction: Reality and Future Trends
source	The Int. Journal of Construction IT 5(2), pp. 19-46
summary	For many years numerous efforts have been spent on the development of standardized approaches for modelling industrial information. During this period stand-alone software tools have been developed in most industries including the Building and Construction sector : Computer Aided Design (CAD) tools, technical software such as software development for energy analysis, project management systems, product databases etc. As this set of computer tools became more and more heterogeneous, the need for communication tools has emerged to enable data to be exchanged between them. Standardising data exchange then becomes a logical step in the improvement of the information management during the whole construction process. The aim of this paper is to put forward the state-of-the art in the domain of product model approaches and standards developments : ISO 10303 STEP, ISO 13584 P-LIB and ISO 15531 MANDATE. We will give a global overview of the existing applications in the construction sector, both in terms of product, or process models, most of them provided by either national or European projects.
series	journal paper
last changed	2003/05/15 21:45

_id	d2e0
id	d2e0
authors	Horne M, Hill R, Underwood C
year	1997
title	Visualisation of Photovoltaic Clad Buildings
source	International Conference on Information Visualisation -IV 97, London, 27-29 August 1997, ISBN 0 8186 8076 8
summary	This paper describes a study carried out to investigate the capabilities of computer aided design software for the visualisation of building elevations and detail, with focus on the representation of photovoltaic cells in facade architecture. The development of photovoltaic (PV) technology, converting energy from sunlight into electricity, has resulted in the emergence of PV as a building material. This has generated much debate on the aesthetic implications of PV integrated buildings. PV introduces a particularly complex set of requirements not present in traditional cladding materials. As well as the physical characteristics of the material, there is a need to consider factors such as orientation to the sun, and shadows cast by neighbouring buildings. Architects, engineers, developers, clients and the general public all need to be able to visualise proposed designs, either of new or refurbished buildings. This study investigates both the process and end results of computer visualisation in the context of photovoltaic clad buildings.
keywords	Visualisation, PV, CAD evaluation
series	other
type	normal paper
email
last changed	2006/06/08 22:54

_id	f071
authors	Maher, M.L., Cicognani, A. and Simoff, S.J.
year	1997
title	An Experimental Study of Computer Mediated Collaborative Design
source	International Journal of Design Computing, Key Centre of Design Computing, University of Sydney, Sydney
summary	The use of computer technology in design practice is moving towards a distributed resource available to a team of designers. The development of software to support designers has traditionally been based on the assumption that there will be a single person using the software at a time. Recent developments have enabled the feasibility of software for two or more simultaneous users, leading to the possibility of computer mediated collaborative design (CMCD), where the computer plays the role of mediator and design information handler. There is the potential for the computer to play a more active role in collaborative design through enhanced visibility of 3D models and assistance in generating alternative designs and design critiques. With this potential the computer not only mediates the collaborative design process but actively supports the designers. Research in integrated CAD, multimedia and design database systems, virtual design studios, and design protocol studies provide the basis for a formal study of CMCD. We have developed an experimental methodology to study the difference in design semantics documented using computer applications when designing alone as compared to designing collaboratively. This methodology can be applied to study other aspects of CMCD.
series	journal paper
email
last changed	2003/04/23 15:50

_id	6d59
authors	Papamichael, K., LaPorta, J. and Chauvet, H.
year	1997
title	Building Design Advisor: automated integration of multiple simulation tools
source	Automation in Construction 6 (4) (1997) pp. 341-352
summary	The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, conceptual and schematic phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to benefit from the capabilities of multiple tools.The BDA provides a graphical user interface that consists of two main elements: the Building Browser and the Decision Desktop. The Browser allows building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to multiple descriptive and performance parameters addressed by the tools linked to the BDA.The BDA is implemented as a Windows®-based application for personal computers. Its initial version is linked to a Schematic Graphic Editor (SGE), which allows designers to quickly and easily specify the geometric characteristics of building components and systems. For every object created in the SGE, the BDA activates a Default Value Selector (DVS) mechanism that selects `smart' default values from a Prototypes Database for all non-geometric parameters required as input to the analysis and visualization tools linked to the BDA. In addition to the SGE that is an integral part of its user interface, the initial version of the BDA is linked to a daylight analysis tool, an energy analysis tool, and a multimedia, Web-based Case Studies Database (CSD). The next version of the BDA will be linked to additional analysis tools, such as the DOE-2 (thermal, energy and energy cost) and RADIANCE (day/lighting and rendering) computer programs. Plans for the future include the development of links to cost estimating and environmental impact modules, building rating systems, CAD software and electronic product catalogs.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	2354
authors	Clayden, A. and Szalapaj, P.
year	1997
title	Architecture in Landscape: Integrated CAD Environments for Contextually Situated Design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.q6p
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper explores the future role of a more holistic and integrated approach to the design of architecture in landscape. Many of the design exploration and presentation techniques presently used by particular design professions do not lend themselves to an inherently collaborative design strategy. Within contemporary digital environments, there are increasing opportunities to explore and evaluate design proposals which integrate both architectural and landscape aspects. The production of integrated design solutions exploring buildings and their surrounding context is now possible through the design development of shared 3-D and 4-D virtual environments, in which buildings no longer float in space. The scope of landscape design has expanded through the application of techniques such as GIS allowing interpretations that include social, economic and environmental dimensions. In architecture, for example, object-oriented CAD environments now make it feasible to integrate conventional modelling techniques with analytical evaluations such as energy calculations and lighting simulations. These were all ambitions of architects and landscape designers in the 70s when computer power restricted the successful implementation of these ideas. Instead, the commercial trend at that time moved towards isolated specialist design tools in particular areas. Prior to recent innovations in computing, the closely related disciplines of architecture and landscape have been separated through the unnecessary development, in our view, of their own symbolic representations, and the subsequent computer applications. This has led to an unnatural separation between what were once closely related disciplines. Significant increases in the performance of computers are now making it possible to move on from symbolic representations towards more contextual and meaningful representations. For example, the application of realistic materials textures to CAD-generated building models can then be linked to energy calculations using the chosen materials. It is now possible for a tree to look like a tree, to have leaves and even to be botanicaly identifiable. The building and landscape can be rendered from a common database of digital samples taken from the real world. The complete model may be viewed in a more meaningful way either through stills or animation, or better still, through a total simulation of the lifecycle of the design proposal. The model may also be used to explore environmental/energy considerations and changes in the balance between the building and its context most immediately through the growth simulation of vegetation but also as part of a larger planning model. The Internet has a key role to play in facilitating this emerging collaborative design process. Design professionals are now able via the net to work on a shared model and to explore and test designs through the development of VRML, JAVA, whiteboarding and video conferencing. The end product may potentially be something that can be more easily viewed by the client/user. The ideas presented in this paper form the basis for the development of a dual course in landscape and architecture. This will create new teaching opportunities for exploring the design of buildings and sites through the shared development of a common computer model.
keywords	Integrated Design Process, Landscape and Architecture, Shared Environmentsenvironments
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/szalapaj/szalapaj.htm
last changed	2022/06/07 07:50

_id	389b
authors	Do, Ellen Yi-Luen
year	2000
title	Sketch that Scene for Me: Creating Virtual Worlds by Freehand Drawing
doi	https://doi.org/10.52842/conf.ecaade.2000.265
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 265-268
summary	With the Web people can now view virtual threedimensional worlds and explore virtual space. Increasingly, novice users are interested in creating 3D Web sites. Virtual Reality Modeling Language gained ISO status in 1997, although it is being supplanted by the compatible Java3D API and alternative 3D Web technologies compete. Viewing VRML scenes is relatively straightforward on most hardware platforms and browsers, but currently there are only two ways to create 3D virtual scenes: One is to code the scene directly using VRML. The other is to use existing CAD and modeling software, and save the world in VRML format or convert to VRML from some other format. Both methods are time consuming, cumbersome, and have steep learning curves. Pen-based user interfaces, on the other hand, are for many an easy and intuitive method for graphics input. Not only are people familiar with the look and feel of paper and pencil, novice users also find it less intimidating to draw what they want, where they want it instead of using a complicated tool palette and pull-down menus. Architects and designers use sketches as a primary tool to generate design ideas and to explore alternatives, and numerous computer-based interfaces have played on the concept of "sketch". However, we restrict the notion of sketch to freehand drawing, which we believe helps people to think, to envision, and to recognize properties of the objects with which they are working. SKETCH employs a pen interface to create three-dimensional models, but it uses a simple language of gestures to control a three-dimensional modeler; it does not attempt to interpret freehand drawings. In contrast, our support of 3D world creation using freehand drawing depend on users’ traditional understanding of a floor plan representation. Igarashi et al. used a pen interface to drive browsing in a 3D world, by projecting the user’s marks on the ground plane in the virtual world. Our Sketch-3D project extends this approach, investigating an interface that allows direct interpretation of the drawing marks (what you draw is what you get) and serves as a rapid prototyping tool for creating 3D virtual scenes.
keywords	Freehand Sketching, Pen-Based User Interface, Interaction, VRML, Navigation
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	c906
authors	Ekholm, Anders and Fridqvist, Sverker
year	1997
title	Design and Modelling in a Computer Integrated Construction Process - The BAS-CAAD Project
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 501-518
summary	A new approach to product modelling in a design context is proposed. CAD-software must not only enable product modelling, but must also support product design. This is not fully achieved in the traditional 'enumerative' approach to product modelling. We discuss how product design and modelling can be based on a facetted' approach to information modelling, and how a data model that supports the design process can be based on a framework for system information. The background for our research is the current development in the construction industry towards a computer integrated construction process. A first prerequisite for this is the use of computer based models. Another prerequisite is that CAD-software can support the design of the results of the construction process, including construction works, user organisations, and the production and facility management processes. A third prerequisite is that computer based models are built with standardised concepts and terminology to enable exchange of information between different actors and computer systems during different stages of the construction process. Principles for organising frameworks for user organisation and construction works information are presented in an appendix.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	c59c
authors	Kokosalakis, Jen
year	1997
title	C AD VANTAGE for Communities, Professionals and Students
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 235-254
summary	I propose to consider how added value for professionals, and the consumers of their buildings and students of these processes might be attained. Through the vehicle of new technologies including the humble 'CAD' system a fuller collaboration in design decision- making is aided through representation of 3 dimensional design ideas and their comprehension from different 'vantage' points. Thus computing may enhance opportunity for more informed dialogue involving verbal and visual responses between the intentions of the architect and client and promise to open up more of the architectural design process to participation by the building consumers, bringing advantage' to all actors in the design process. More liberated sketching at the system is becoming evident as programmers, and users' skills adapt to the search for more enabling, creative and easier tools, procedures and interfaces freeing responsiveness to consumer wishes. Reflection from clients and practitioners brings hope that a more informed dialogue is enabled through computer supported designing. The beginnings of CAAD support to community groups acts as a facilitator. Contacting and working with community groups follows effective 'Community Development' precedents established in the Liverpool of the sixties; to contact, activate, enable and provide necessary skill supports for community-driven striving for resolution of housing problems. Results of this, ploughed back into CAD teaching for Environmental Planners, brings increased awareness and visualisation of environmental, architectural and human issues and promises to begin a new cycle of more informed participation for citizens, architects, planners and consultants.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	9afb
authors	Maher, M.L., Simoff, S. and Cicognani, A.
year	1997
title	Observations from an experimental study of computer-mediated collaborative design
source	M.L. Maher, J.S. Gero, and F Sudweeks eds. Preprints Formal Aspects of Collaborative CAD, Key Centre of Design Computing, University of Sydney, Sydney, pp.165-185
summary	The use of computer technology in design practice is moving towards a distributed resource available to a team of designers. The development of software to support designers has been based largely on the assumption that there will be a single person using the software at a time. Recent developments have enabled the feasibility of software for two or more simultaneous users, leading to the possibility of computer-mediated collaborative design. Research in integrated CAD, virtual design studios, and design protocol studies provide the basis for a formal study of computer-mediated design. We develop an experimental study of computer-mediated collaborative design with the aim of collecting data on the amount and content of design semantics documented using computer applications when designing alone as compared to designing collaboratively. The experiment includes the definition of an hypothesis, aim, methodology, data collection and coding schemes. The experiment and some preliminary observations are presented, followed by directions for further research.
series	other
email
last changed	2003/04/23 15:14

_id	2064
authors	Murakami, Y., Morozumi, M., Iino, K., Homma, R. and Iki, K.
year	1997
title	On the Development and the Use of Group Work CAD for Windows-PCS
doi	https://doi.org/10.52842/conf.caadria.1997.179
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 179-186
summary	With the development of high-band width communication technology, designers’ interests seem to shift gradually from a single-user, single-domain system to a network based group-work design system. So long as one regards that the design activity develops only in a concurrent, but asynchronous fashions, it is possible to say that file transfers through computer networks have already opened up the possibility of a hands-on collaborative design process in which all participants do not have to gather in the same place. However few CAD systems support group design work that develops in a concurrent synchronous fashion. This paper discusses a basic model of group work CAD systems that the authors have developed for windows PCs linked with LAN. Reviewing procedure of system operation, the authors conclude that the system could stimulate and accelerate a process of group wok design.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	diss_ruhl
id	diss_ruhl
authors	Ruhl, Volker R.
year	1997
title	Computer-Aided Design and Manufacturing of Complex Shaped Concrete Formwork
source	Doctor of Design Thesis, Graduate School of Design, Harvard University, Cambridge, MA
summary	The research presented in this thesis challenges the appropriateness of existing, conventional forming practices in the building construction industry--both in situ or in prefabrication--for building concrete "freeforms," as they are characterized by impracticality and limitations in achieved geometric/formal quality. The author's theory proposes the application of alternative, non-traditional construction methods derived from the integration of information technology, in the form of Computer-Aided Design (CAD), Engineering (CAE) and Manufacturing (CAM), into the concrete tooling and placing process. This concept relies on a descriptive shape model of a physically non-existent building element which serves as a central database containing all the geometric data necessary to completely and accurately inform design development activities as well as the construction process. For this purpose, the thesis orients itself on existing, functioning models in manufacturing engineering and explores the broad spectrum of computer-aided manufacturing techniques applied in this industry. A two-phase, combined method study is applied to support the theory. Part I introduces the phenomenon of "complexity" in the architectural field, defines the goal of the thesis research and gives examples of complex shape. It also presents the two analyzed technologies: concrete tooling and automation technology. For both, it establishes terminology, classifications, gives insight into the state-of-the-art, and describes limitations. For concrete tooling it develops a set of quality criteria. Part II develops a theory in the form of a series of proposed "non-traditional" forming processes and concepts that are derived through a synthesis of state-of-the-art automation with current concrete forming and placing techniques, and describes them in varying depth, in both text and graphics, on the basis of their geometric versatility and their appropriateness for the proposed task. Emphasis is given to the newly emerging and most promising Solid Freeform Fabrication processes, and within this area, to laser-curing technology. The feasibility of using computer-aided formwork design, and computer-aided formwork fabrication in today's standard building practices is evaluated for this particular technology on the basis of case-studies. Performance in the categories of process, material, product, lead time and economy is analyzed over the complete tooling cycle and is compared to the performance of existing, conventional forming systems for steel, wood, plywood veneer and glassfiber reinforced plastic; value s added to the construction process and/or to the formwork product through information technology are pointed out and become part of the evaluation. For this purpose, an analytical framework was developed for testing the performance of various Solid Freeform Fabrication processes as well as the "sensitivity," or the impact of various influencing processes and/or product parameters on lead time and economy. This tool allows us to make various suggestions for optimization as well as to formulate recommendations and guidelines for the implementation of this technology. The primary objective of this research is to offer architects and engineers unprecedented independence from planar, orthogonal building geometry, in the realization of design ideas and/or design requirements for concrete structures and/or their components. The interplay between process-oriented design and innovative implementation technology may ultimately lead to an architecture conceived on a different level of complexity, with an extended form-vocabulary and of high quality.
series	thesis:PhD
last changed	2005/09/09 12:58

_id	9e13
authors	Seward, D.W., Scott, J.N., Dixon, R., Findlay, J.D. and Kinniburgh, H.
year	1997
title	The automation of piling rig positioning using satellite GPS
source	Automation in Construction 6 (3) (1997) pp. 229-240
summary	The paper is divided in two parts. Part one describes the Stent Automatic Pile Positioning and Recording system (SAPPAR) which was launched in November 1994. The system utilises a Trimble satellite global positioning system (GPS) to assist rig drivers in accurately positioning the rig over a pile position without the need for setting out. Advantages of the system include: cost savings by removing the need for site survey staff; faster set-up times over pile positions; increased accuracy - the system can reliably position the rig to within ± 25 mm; removal of problems resulting from damage to setting out pins; constant monitoring of pile position; and Links to CAD for data input and as-built drawings. Part two describes a further development of the system in collaboration with Lancaster University and Casagrande, the Italian rig manufacturer. The aim of the research is to fully automate the final positioning process. This represents one of the first uses of GPS for real-time automation. The system hardware components include: ultra-compact PC104 processor cards for a compact and robust embedded system; minimum sensing on the rig to minimise cost and maximise robustness; and limit sensors to facilitate on-board safety. The control algorithms were developed on a fifth-scale model in the laboratory using an innovative and new approach to the design of model based control systems. The importance of careful consideration of safety issues is stressed and conclusions are drawn based on the early findings from preliminary field trials.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	9
authors	Stipech, Alfredo
year	1998
title	Un Nuevo Horizonte Arquitectonico, Productivo e Intelectual (A New Architectural, Productive and Intelectual Horizon)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 76-83
summary	This work presents the pedagogical experience of a Design Workshop that investigated the impact of the digital and analogic means on the architectonic design process This work was based on the research of Dr. Arch. Julio BermÝdez who also directed this workshop in 1997. This class was part of the Training Program organized by the "Centro de Informatica y Diseho" (CID) at the "Universidad Nacional del Litoral" FADU (Facultad de Arquitectura Diseho y Urbanismo) Santa Fe, Argentina and made possible by the ongoing International Program of Academic Exchange between the FADU and the (University of Utah Graduate School of Architecture (IPAE Project NO 4). The experimental studio utilized an architectural problem to study the procedural, technical, interpretative and theoretical issues associated with the relationship of contemporary media and design process. The pedagogical vehicle was a program that expresses in itself the meeting or collision between two cultures competing for dominance at the end of the millennium: the immemorial material culture (corporeal, tectonic) and the new and everyday more influent virtual culture (information, nets, media, simulation). The premise for the design process, communication and criticism was the constant migration between the digital and analog representation systems. Within this theoretical-practical context semantic aspects containing different representation modalities were used such as physical and electronic models along with systematic and sensitive drawings (manuals, pixels and with CAD). Hybrid interfaces took a leading role in the process since they allowed the communication between analog and digital media through the creative and technical interaction between scanner, video and computer. This architectural and media context generated an intense pedagogic environment fostering the development of creativity and a critical attitude while allowing concrete breakthroughs in the teaching process and format design. Our work reflects on these results showing examples of stud-go works and providing a final evaluation of this unique experience in Argentina.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	2a63
authors	Wrona, S., Miller, D. and Klos, J.
year	1997
title	The Systematization of Information in the Computer Aided Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.e8l
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	Since the CAD methods were invented, the systematization of information in CAD has been strongly connected to the computerization of architect’s workshop. Nowadays, in 90., this systematization has to the great extent negative consequences. A designer understands the systematization of information through abilities and disabilities of the one, particular graphical aided documentation development system, which he deploys himself. The traditional method of design is clearly opposed to the computerized method. Data bases are seen by architects as a set of information describing particular and unique architectural project and some selected aspects correlated with narrow specialization of designer. Collaboration between participants of design process is still very challenging due to the usage of different tools and different systematization of information. It is necessary to define modern part of information in architectural design. The systematization of information should be a foundation for development of computer systems and not contrary, in this way it will be possible to overcome opposition between traditional and computerized techniques. Architect’s workshop, from the point of view of the informational structure of ongoing information exchange processes, should in greater part relay on the experience of structural analysis used for development of information systems in business. Effective utilization of computer methods requires the extension of collaboration between all the participants of design process, search for active access to distributed data bases (i.e. Internet) and increase of methodological consciousness (the ability to form own design strategies, methods and structures) indispensable for development of modern CAD systems which wouldn’t be limited to a computer graphics.
keywords	CAAD, Collaboration, Databases, Information, Systematization, Workshop
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/wrona/wrona.htm
last changed	2022/06/07 07:50

_id	460e
authors	Dannettel, Mark E
year	1997
title	Interactive Multimedia Design: Operational Structures and Intuitive Environments for CD-ROM
doi	https://doi.org/10.52842/conf.caadria.1997.415
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 415-427
summary	This paper presents practical design concepts for the production of CD-ROMs or on-line media projects which are intended for scholastic and professional use. It is based on the experience and knowledge which has been gained while developing a multimedia package here at the Department of Architecture at CUHK. The package deals exclusively with the technical issue of vertical transportation in buildings, and is intended to be used as a design tool in professional offices, as well as in classroom settings. The required research and production for the development of the structures, formats, and interfaces of this project, along with the consequential evaluation and revision of this work, has led to a greater understanding of appropriate applications for interactive interactive multimedia designs. Specially, the paper addresses the fundamental issues of ‘user-format’, and a distinction is made between applications which operate as ‘tools’ and those which operate as ‘resources’. Descriptions are provided for both types of operational formats, and suggestions are made as to how one might decided which format would be appropriate for a specific project. Briefly, resource produces imply that a user actively pursues information in a relatively static environment, while tool procedures imply that a user works jointly with the software to process information and arrive at a unique output. This distinction between the two formats is mostly grounded in the design of the structure and user-interface, and thus the point is made that the material content of the application does not necessarily imply a mandatory use of either format. In light of this observation that an application’s format relies on the appropriateness of operational procedures, rather than on its material content, further discussions of the implications of such procedures (using a ‘resource’ vs. using a ‘tool’) are provided.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	8818
authors	Donath, Dirk and Petzold, Frank
year	1997
title	From Digital Building Surveying to an Information System
doi	https://doi.org/10.52842/conf.ecaade.1997.x.a6v
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper describes the development of a software concept and a prototype system for a structured way of collecting and organising information about existing buildings. An analysis of traditional methods and processes involved in architectural surveying forms the basis for the development of a programming system for the structured surveying, preparation, organisation and use of digital information about existing architectural objects. Use is made throughout of current tools and techniques in the field of applied informatics, and these in turn are evaluated as to their suitability and usefulness. Particular emphasis is given to the systematic breakdown of a building into its component parts and information relevant to its use and planning, and to the integration of different methods of capture and presentation of this information. The architects' normal working methods inform the entire process.
keywords	Building Surveying, Information System, CAAD, Surveying Techniques
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/donath/donath.htm
last changed	2022/06/07 07:50

_id	b3f6
authors	Goodwin, G.
year	1997
title	Software and hardware summary
source	Automation in Construction 6 (1) (1997) pp. 29-31
summary	With the rate of change accelerating in both technological development and in the spread of global markets, very few cost cutting businesses will survive in a value added marketplace. Information sharing over networks has a lot to offer the Industry by way of eliminating delays from the construction process and inventory from the Supply Chain. The most significant change by 2005 will be in networking and communications. Discovering design flaws at the design stage rather than when the building is in use must be very attractive to clients of the Construction Industry. Construction firms must have some sort of IT Strategy or clear view of how to exploit IT to support their businesses. Large companies need to act as coaches and mentors to smaller ones. The Industry cannot maximise its IT benefits unless all the players participate.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	1f62
authors	Kiliccote, Han
year	1997
title	A standards processing framework
source	Carnegie Mellon University, Pittsburgh
summary	Civil engineers create and employ a very large number of design standards, especially in the United States. Designing using such a large number of design standards is a tedious, laborious, and difficult task. One major research task in Computer-Aided Engineering (CAE) is the development of software tools that assist in the usage of design standards during the design process. This dissertation, a standards processing framework is presented. It is an agent-based approach to providing computer-aided support for using design standards. In this framework, modules, such as standards processing servers, are treated as agents communicating using a defined communication language. One immediate advantage of this architecture is that it allows the incorporation of a broad, powerful set of representation for use in modeling design standards.
series	thesis:PhD
email
more	http://han.ices.cmu.edu
last changed	2003/02/12 22:37

For more results click below: