Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 521

Reformat results as: short short into frame detailed detailed into frame

_id	fe09
authors	Morozumi, Mitsuo and Homma, Riken
year	2001
title	A Design Studio Program that Applied Groupware to Stimulate Students’ Interactions - A Case Study of Junior Studio
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 317-322
doi	https://doi.org/10.52842/conf.ecaade.2001.317
summary	Since 1996, Kumamoto University has repeated several experiments to apply web-based collaborative design techniques to a junior design studio to stimulate students’ interaction in the class and to enhance their design abilities. As it became evident after a two-year experiment that writing web pages and uploading them to a web server was a barrier of communication for students, the authors developed a web-based groupware called GWNotebook, and started using it in 1998. In the fall semester of 2000, the authors tested the groupware in a revised version, and a new program of studio instructions that assumed the use of the groupware. This paper, referring students’ answers to two sets of questionnaire respectively carried out in 1997 and 2000, discusses the effectiveness of groupware and the instruction program.
keywords	Design Studio, Groupware, Www, Information Sharing, Design Communication
series	eCAADe
email
last changed	2022/06/07 07:59

_id	1fb3
authors	Akin, O., Cumming, M., Shealey, M. and Tuncer, B.
year	1997
title	An electronic design assistance tool for case-based representation of designs
source	Automation in Construction 6 (4) (1997) pp. 265-274
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case-based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case-base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	63bb
authors	Kokosalakis, J., Brown, G. and Moorhouse, J.
year	1997
title	Incremental Reflective Learning and Innovative Practice in Electronic Design Media
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.u1q
summary	This paper discusses the impact of a continuously developing CAAD learning strategy, describing in detail a few of these principles, and considering their dynamic impact through deeper more lasting learning, feeding a substantial intensification in the application of Architectural Designing with Computers, changing design methods with interesting analytical and creative results.Aspects of the CAAD teaching discussed include extended collaboration between CAAD and design tutors in defining learning outcomes and tutoring the students’ application of CAAD to design projects, inclusion of CAAD within traditional interim reviews and feedback for design projects and bringing emphasis on conceptual principles, structuring the model and simple programming into earlier stages of the teaching programme and a simple excursion into programming. Studio project examples indicate the interplay between teaching, learning and achievement. Some evidence is explored in greater detail. from the "Interstitial Layers" project utilising the appropriateness of CAAD to store and switch the visibility of spatial data in endless permutations and extensive combinations for mapping, analysing and strategically projecting patterns of city centre activities, fabric and space. Students’ demonstrate a dynamic command of CAAD: as a vehicle for conceptual design, a device to analytically review, criticise and modify the design, as a means to explain design ideas to tutors and to develop and detail final building designs. Reciprocal valuing of quality CAAD achievement between architecture students and staff is seen to be contributing to involvement and motivation, reinforcing striving for equality of achievement. Reference to a further strand of the new methodology considers the impact of tutoring based in researcher findings from video case study precedents of architects practising creative design through use of computers, on a more open, effective development of the architecture students’ own designing processes, culminating in interesting design work.
keywords	Incremental Learning, Understanding, CAAD-Design Approaches, Retention, Feedback, Review, Urban Spatial Forms, Spatial Analysis, "Interstitial Layers", Patterns, Conceptual Electronic Designing, Creative Innovation, Equality and Sharing
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/kokosa/jmup01.htm
last changed	2022/06/07 07:50

_id	05fc
authors	Park, Hoon
year	1997
title	Cyber Design Studio: Using Manual Media Via Internet Connections for Collaborative Design
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.c9n
summary	This article explores how Computer Aided Design (CAD) systems can be applicable and integrated into the early stage of design. CAD systems are still technologies that are not broadly accepted as useful to the designer especially in this stage of design because CAD systems use the monitor and mouse which differ from the sketch paper and pen of manual media. This article discusses how manual media and Computer-Mediated Communication (CMC) technologies - video conferencing, in my examples - that employ multimedia and Internet can empower designers by providing them with new ways of working together. For accommodating this approach, a prototype CAD system has been developed in which the system consists of a conventional drawing and extra capabilities. This system allows the designer to work with computer based and paper based tools in the same conventional environment as well as remote communications between the designers. This environment is used as the setting for a case study of design tutorials in the design studio. The analysis of this work provides interesting insight into the traditional roles of design studio as well as the relationship between digital and manual media.
keywords	Cyber Design Studio, Collaborative Design
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/parkh/parkhoon.htm
last changed	2022/06/07 07:50

_id	ab09
authors	Qaqish, Ra’ed and Hanna, Raid
year	1997
title	The Impact of CAL Strategies on CAD
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 475-489
doi	https://doi.org/10.52842/conf.caadria.1997.475
summary	This paper reports on a two fold study, which examines the impact of CAL on CAD and architectural education, and evaluates the overall effectiveness and efficiency of CAD teaching and strategies in the curriculum of architecture. The study also examined the need for a framework within which the creation of a module for applying CAL in CAD to support the curriculum of architecture can be structured and assessed. The main concern of the study was to explore the range and balance of computer assisted activities in the design studio, and the interpretation of the various roles of the CAD tutor and his/her involvement in delivering these activities. In delivering these activities two criteria, namely: teaching methods and CAD integration (which are interchangeable and yet play different roles), can have a distinct effect on the implementation of CAL in the design studio. The case study evaluated and investigated the CAL the AEC course as part of the 3rd year design studio at Mackintosh School of Architecture, to determine to what extent the AEC learning events were effective in advocating new strategies in CAD. The methods of this investigation consisted of classroom observations and administrating questionnaires. Variables such as the group and gender differences/participation, the tutor’s confidence, level of administration and strategies to help with technical problems and motivations, also the task-related activities, tangibility of the learning materials, and the minutes of lesson have been examined. The global rating of the CAL events in CAD lessons, the CAL organisation and sequence, the level of students’ confidence, the rate of students’ interest, the mode of classroom, the level of learner performance and the relationship between CAL and the overall curriculum have also been empirically examined and their interdependent relationships explored. The findings of this study may help in establishing future directions in adopting some form of effective CAL strategies in CAD. The study also serves as an evaluation tool for computing teaching in the design studio. Furthermore, the checklist used in this case study may also be used in evaluating the different courses in CAD in the curriculum of architectural schools.
series	CAADRIA
last changed	2022/06/07 08:00

_id	0724
authors	Park, T., and Mirande, V.
year	1997
title	Comparison of the Effectiveness of Two Computer-Assisted Instruction Methods for Learning Architectural Concepts in Design Studio
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.d9t
summary	In design studio, during the preliminary stage of a project, learning architectural concepts through the study of precedents is a common activity. A few computer-based tools for precedent study have been developed, however, most have focused on delivering information without considering aspects of learning concepts. Although the tools apply digital media, such as hypermedia and multimedia, their instructional method is limited to direct instruction for presentation of information. The design and development of the tools neglect the need of the study of concept learning, learners, and learning methods.
keywords	Architectural precedent study, Concept learning, Design Studioteaching, CAI (computer-assisted instruction)
series	eCAADe
more	http://info.tuwien.ac.at/ecaade/proc/park/park.htm
last changed	2022/06/07 07:50

_id	2342
authors	Chiu, Mao-Lin and Shih, Shen-Guan
year	1997
title	Analogical Reasoning and Case Adaptation in Architectural Design: Computers Vs. Human Designers
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 787-800
summary	This paper depicts the studies of the differences between human designers and computers in analogical reasoning and case adaptation. Four design experiments are undertaken to examine how designers conduct case-based design, apply dimensional and topological adaptation. The paper also examines the differences of case adaptation by novice and experienced designers, and between human judgement in case adaptation and the evaluation mechanism by providing similarity assessment. In conclusion, this study provides the comparative analysis from the above observation and implications on the development of case-based reasoning systems for designers.
keywords	Case-based Reasoning, Analogical Reasoning, Case Adaptation, Computer-Aided Architectural Design
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4a30
authors	Chiu, Mao-Lin
year	1997
title	Analogical Reasoning in Architectural Design: Comparison of Human Designers and Computers in Case Adaptation
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 205-215
doi	https://doi.org/10.52842/conf.caadria.1997.205
summary	Design cases were considered as the design solution or condensed knowledge of design experience. In the analogical reasoning process, case adaptation is the fundamental task for solving the problem. This paper is aimed to study the difference between human designers and computers in case adaptation. Two design experiments are undertaken for examining how designers apply dimensional and topological adaptation, exploring the difference of case adaptation by novice and experienced designers, and examining the difference between human judgement in case adaptation and the evaluation mechanism by providing similarity assessment. In conclusion, this study provides the comparative analysis from the above observation and implications on the development of case-based reasoning systems for designers.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	e821
authors	Hartkopf, V., Loftness, V., Mahdavi, A., Lee, S. and Shankavaram, J.
year	1997
title	An integrated approach to design and engineering of intelligent buildings--The Intelligent Workplace at Carnegie Mellon University
source	Automation in Construction 6 (5-6) (1997) pp. 401-415
summary	In the past few years, there have been significant advances made in the design and engineering of "intelligent" workplaces, buildings that not only accommodate major advances in office technology but provide better physical and environmental settings for the occupants. This paper will briefly present recent approaches to the creation of innovative environments for the advanced workplace. The architectural and engineering advances demonstrated in Japan, Germany, North America, the United Kingdom, and France can be summarized in four major system categories: (1) enclosure innovations including approaches to load balancing, natural ventilation, and daylighting; (2) heating, ventilation and air-conditioning (HVAC) system innovations including approaches to local control and improved environmental contact; (3) data/voice/power "connectivity" innovations; and (4) interior system innovations, including approaches to workstation and workgroup design for improved spatial, thermal, acoustic, visual, and air quality. In-depth international field studies of over 20 intelligent office buildings have been carried out by a multidisciplinary expert team of the Advanced Building Systems Integration Consortium (ABSIC) based at Carnegie Mellon University. ABSIC is a university-industry-government partnership focused on the definition and development of the advanced workplace. The ABSIC field team evaluated the component and integrated system innovations for their multidimensional performance qualities, through expert analysis, occupancy assessments, and field diagnostics.Based on the results of the case studies and building on the most recent technological advances, the ABSIC team developed the concepts for the Intelligent Workplace, a 7000 square foot living laboratory of office environments and innovations. This project is now under construction at Carnegie Mellon University and its features are discussed in the second section of this paper.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	e664
authors	Herbert, Daniel M.
year	1997
title	Taking Turns: Strained Metaphors as Generators of Form in Computer Aided Design
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 267-280
doi	https://doi.org/10.52842/conf.acadia.1997.267
summary	This paper examines the role of certain graphic metaphors as generators of form in computer aided design. An introduction establishes that representation in architectural design is largely metaphorical, that metaphor is only one among several types of rhetorical turns, and that such turns can be of value in the design process. The paper then describes a case study a residential design project in which the author used a 3D computer-based modeling program to produce a type of strained rhetorical turn called catachresis. Through a series of catachrestic moves, conventional representations were made to yield unconventional architectural meanings. Next the paper discusses inferences from the case study regarding the play of rhetorical turns in computer aided design. The paper concludes with suggestions for catachrestic "wild card" and indeterminate functions in CAD systems to keep design processes and products open to uncertainty.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	a5c7
authors	Hovestadt, Ludger and Hovestadt, Volkmar
year	1997
title	ARMILLA5 - Supporting Design, Construction and Management of Complex Buildings
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 135-150
summary	ARMILLA5 is a generic computer aided design system, which supports the cooperative design of complex buildings (such as labs, offices or schools) over multiple levels of abstraction. It follows the metaphor of a virtual building site. The designers and engineers meet at a spatial location on the Internet and prepare the building construction by simulating the building site. This article describes the three essential components of the ARMILLA5-model: the geometric model which describes the spatial and physical aspects of the building site, the semantic model which implements passive building components as objects and active building components as applets or applications, and the planning model, which organizes the work steps of the individual engineers and their cooperation. The model is described using different software prototypes written in Objective C, CAD systems and HTML/JAVA.
keywords	Dynamic Buildings, CAAD, CSCW, VRML, Case-based Reasoning, Facility Management, Augmented Reality
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	acadia07_040
id	acadia07_040
authors	Hyde, Rory
year	2007
title	Punching Above Your Weight: Digital Design Methods and Organisational Change in Small Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 40-47
doi	https://doi.org/10.52842/conf.acadia.2007.040
summary	Expanding bodies of knowledge imply expanding teams to manage this knowledge. Paradoxically, it can be shown that in situations of complexity—which increasingly characterise the production of architecture generally—the small practice or small team could be at an advantage. This is due to the increasingly digital nature of the work undertaken and artefacts produced by practices, enabling production processes to be augmented with digital toolsets and for tight project delivery networks to be forged with other collaborators and consultants (Frazer 2006). Furthermore, as Christensen argues, being small may also be desirable, as innovations are less likely to be developed by large, established companies (Christensen 1997). By working smarter, and managing the complexity of design and construction, not only can the small practice “punch above its weight” and compete with larger practices, this research suggests it is a more appropriate model for practice in the digital age. This paper demonstrates this through the implementation of emerging technologies and strategies including generative and parametric design, digital fabrication, and digital construction. These strategies have been employed on a number of built and un-built case-study projects in a unique collaboration between RMIT University’s SIAL lab and the award-winning design practice BKK Architects.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	02c5
authors	Lin, Feng Tyan and Wang, Hung Hsiang
year	1997
title	A Case Study of Cooperative Design Using Video Conference
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 153-162
doi	https://doi.org/10.52842/conf.caadria.1997.153
summary	In this case study we observed an experimental cooperative design project: a parking lot design using a video conference system. Twelve graduate students of planning and design were divided into two teams for landscape design and traffic planning. They used ProShareTM, a computer-supported video conference system, to co-design at two separate rooms. We used video equipment to record this conference for a detailed analysis. Some experiences on using this system are described. The results indicate the relationships within the work organization, physical workplace and cooperative design. We argued that this workplace becomes more important, even though much research has put emphasis on the cyberspace in cooperative design. The team members’ tacit protocol has importance, but it does not guarantee any resolution of conflicts. This cooperative design is not only a social process, but also a logic of iterative verifications and falsifications. It is dangerous to construct a theory of computer-supported cooperative design simply based on this case study; however, such an observation could be the first step towards the theory.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	a9f5
authors	Maher, Mary Lou
year	1997
title	Sam: A Multimedia Case Library of Structural Designs
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 5-13
doi	https://doi.org/10.52842/conf.caadria.1997.005
summary	Recent developments in multimedia and case-based reasoning provide the basis for developing teaching aids for architecture students that present technology and science learning materials as design cases. Case-based reasoning tools can provide assistance in the identification of a relevant design case and the modification of a case for the current design problem. We have developed multimedia library of buildings to support a case-based reasoning approach to teaching structural design. The design cases are linked through a network of concepts that follow a specific learning area, for example, the structural design of tall buildings is linked through the concept of lateral load resistance. The multimedia environment provides an active learning tool that the student uses to generate design solutions.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	6d59
authors	Papamichael, K., LaPorta, J. and Chauvet, H.
year	1997
title	Building Design Advisor: automated integration of multiple simulation tools
source	Automation in Construction 6 (4) (1997) pp. 341-352
summary	The Building Design Advisor (BDA) is a software environment that supports the integrated use of multiple analysis and visualization tools throughout the building design process, from the initial, conceptual and schematic phases to the detailed specification of building components and systems. Based on a comprehensive design theory, the BDA uses an object-oriented representation of the building and its context, and acts as a data manager and process controller to allow building designers to benefit from the capabilities of multiple tools.The BDA provides a graphical user interface that consists of two main elements: the Building Browser and the Decision Desktop. The Browser allows building designers to quickly navigate through the multitude of descriptive and performance parameters addressed by the analysis and visualization tools linked to the BDA. Through the Browser the user can edit the values of input parameters and select any number of input and/or output parameters for display in the Decision Desktop. The Desktop allows building designers to compare multiple design alternatives with respect to multiple descriptive and performance parameters addressed by the tools linked to the BDA.The BDA is implemented as a Windows®-based application for personal computers. Its initial version is linked to a Schematic Graphic Editor (SGE), which allows designers to quickly and easily specify the geometric characteristics of building components and systems. For every object created in the SGE, the BDA activates a Default Value Selector (DVS) mechanism that selects `smart' default values from a Prototypes Database for all non-geometric parameters required as input to the analysis and visualization tools linked to the BDA. In addition to the SGE that is an integral part of its user interface, the initial version of the BDA is linked to a daylight analysis tool, an energy analysis tool, and a multimedia, Web-based Case Studies Database (CSD). The next version of the BDA will be linked to additional analysis tools, such as the DOE-2 (thermal, energy and energy cost) and RADIANCE (day/lighting and rendering) computer programs. Plans for the future include the development of links to cost estimating and environmental impact modules, building rating systems, CAD software and electronic product catalogs.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	cbe5
authors	Burry, Mark
year	1997
title	The Cost and Value of Animation for Architectural Designers
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 135-144
summary	As computers laboratories or studios in architecture schools provide greater access to fast machines and sophisticated software, the opportunity for computer aided animation increases I dimension. Previously the domain of the most enthusiastic, it has now become a relatively simple task to move from 3D to 4D. If the impediments to a common access to these new possibilities (for architects) are no longer a matter of the cost and availability of hardware and media, what measures the extent to which we can value the contribution of animation to studio-based design? This paper reports on our progress in establishing some practical and theoretical benchmarks comparing the cost with the value of computer aided (or mediated) animation.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	aa2f
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	1997
title	An Intelligent Assistant for the Architectural Design Studio
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.a3a
summary	It seems by now fairly accepted by many researchers in the field of the Computer Aided Design that the way to realise support tools for the architectural design is by means of the realisation of Intelligent Assistants. This kind of computer program, based on the Knowledge Engineering and machine learning, finds his power and effectiveness by the Knowledge Base on which it is based. Moreover, it appears evident that the modalities of dialogue among architects and operators in the field of building industry, are inadequate to support the exchange of information that the use of these tools requires. In fact, many efforts at international level are in progress to define tools in order to make easier the multiple exchange of information in different fields of building design. Concerning this point, protocol and ontology of structured information interchanges constitute the first steps in this sense, e.g. those under standardisation by ISO (STEP), PDT models and Esprit project ToCEE. To model these problems it has brought forth a new research field: the collaborative design one, an evolution of distributed work and concurrent design. The CAAD Laboratory of Dipartimento di Architettura and Urbanistica per l'Ingegneria has carried out a software prototype, KAAD, based on Knowledge Engineering in the fields of hospital building and of building for aged people. This software is composed by an Interface, a Knowledge Base, a Database and Constraints. The Knowledge Base has been codified by using the formal structure of frames, and has been implemented by the Lisp language. All the elements of KB are objects
keywords	Design Studio
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/carrara/carrara.htm
last changed	2022/06/07 07:50

_id	6496
authors	Chen, Y.Z. and Maver, T.W.
year	1997
title	Integrating Design Tools within a Human Collaborative Working
source	The Int. Journal of Construction IT 5(2), pp. 47-73
summary	This paper stresses the importance of establishing a collaborative working context as the basis for design integration. Within a virtual studio environment framework, a hybrid architecture for design tool integration is presented. Each design tool is wrapped as an autonomous service provider with its own data store; thus the project design data is physically distributed with the design tools. A global product model, which is augmented with meta-data description, is employed to provide a common vocabulary for communications and to assist the management of the distributed resources and activities. Collaboration-aware information is modelled and structured through the meta-data model and a tool model. Based on this, mechanisms for tool service coodination in varying modes are developed. It is then illustrated, through an implemented prototype system, how the integrated design tools might be used in human design work.
series	journal paper
last changed	2003/05/15 21:45

_id	837b
authors	Elger, Dietrich and Russell, Peter
year	2000
title	Using the World Wide Web as a Communication and Presentation Forum for Students of Architecture
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 61-64
doi	https://doi.org/10.52842/conf.ecaade.2000.061
summary	Since 1997, the Institute for Industrial Building Production (ifib) has been carrying out upper level design studios under the framework of the Netzentwurf or Net-Studio. The Netzentwurf is categorized as a virtual design studio in that the environment for presentation, criticism and communication is web based. This allows lessons learned from research into Computer Supported Cooperative Work (CSCW) to be adapted to the special conditions indigenous to the architectural design studio. Indeed, an aim of the Netzentwurf is the creation and evolution of a design studio planing platform. In the Winter semester 1999-2000, ifib again carried out two Netzentwurf studios. involving approximately 30 students from the Faculty of Architecture, University of Karlsruhe. The projects differed from previous net studios in that both studios encompassed an inter-university character in addition to the established framework of the Netzentwurf. The first project, the re-use of Fort Kleber in Wolfisheim by Strasbourg, was carried out as part of the Virtual Upperrhine University of Architecture (VuuA) involving over 140 students from various disciplines in six institutions from five universities in France, Switzerland and Germany. The second project, entitled "Future, Inc.", involved the design of an office building for a scenario 20 years hence. This project was carried out in parallel with the Technical University Cottbus using the same methodology and program for two separate building sites.
keywords	Virtual Design Studios, Architectural Graphics, Presentation Techniques
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

For more results click below: