Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 520

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	diss_ruhl
id	diss_ruhl
authors	Ruhl, Volker R.
year	1997
title	Computer-Aided Design and Manufacturing of Complex Shaped Concrete Formwork
source	Doctor of Design Thesis, Graduate School of Design, Harvard University, Cambridge, MA
summary	The research presented in this thesis challenges the appropriateness of existing, conventional forming practices in the building construction industry--both in situ or in prefabrication--for building concrete "freeforms," as they are characterized by impracticality and limitations in achieved geometric/formal quality. The author's theory proposes the application of alternative, non-traditional construction methods derived from the integration of information technology, in the form of Computer-Aided Design (CAD), Engineering (CAE) and Manufacturing (CAM), into the concrete tooling and placing process. This concept relies on a descriptive shape model of a physically non-existent building element which serves as a central database containing all the geometric data necessary to completely and accurately inform design development activities as well as the construction process. For this purpose, the thesis orients itself on existing, functioning models in manufacturing engineering and explores the broad spectrum of computer-aided manufacturing techniques applied in this industry. A two-phase, combined method study is applied to support the theory. Part I introduces the phenomenon of "complexity" in the architectural field, defines the goal of the thesis research and gives examples of complex shape. It also presents the two analyzed technologies: concrete tooling and automation technology. For both, it establishes terminology, classifications, gives insight into the state-of-the-art, and describes limitations. For concrete tooling it develops a set of quality criteria. Part II develops a theory in the form of a series of proposed "non-traditional" forming processes and concepts that are derived through a synthesis of state-of-the-art automation with current concrete forming and placing techniques, and describes them in varying depth, in both text and graphics, on the basis of their geometric versatility and their appropriateness for the proposed task. Emphasis is given to the newly emerging and most promising Solid Freeform Fabrication processes, and within this area, to laser-curing technology. The feasibility of using computer-aided formwork design, and computer-aided formwork fabrication in today's standard building practices is evaluated for this particular technology on the basis of case-studies. Performance in the categories of process, material, product, lead time and economy is analyzed over the complete tooling cycle and is compared to the performance of existing, conventional forming systems for steel, wood, plywood veneer and glassfiber reinforced plastic; value s added to the construction process and/or to the formwork product through information technology are pointed out and become part of the evaluation. For this purpose, an analytical framework was developed for testing the performance of various Solid Freeform Fabrication processes as well as the "sensitivity," or the impact of various influencing processes and/or product parameters on lead time and economy. This tool allows us to make various suggestions for optimization as well as to formulate recommendations and guidelines for the implementation of this technology. The primary objective of this research is to offer architects and engineers unprecedented independence from planar, orthogonal building geometry, in the realization of design ideas and/or design requirements for concrete structures and/or their components. The interplay between process-oriented design and innovative implementation technology may ultimately lead to an architecture conceived on a different level of complexity, with an extended form-vocabulary and of high quality.
series	thesis:PhD
last changed	2005/09/09 12:58

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	598d
authors	Davies, P.
year	1997
title	Case study - Multiprofessional
source	Automation in Construction 6 (1) (1997) pp. 51-57
summary	IT is just a tool, but the most powerful one ever to be offered to us. This case study deals with the areas at which IT can be targeted within the Building Design Partnership. Firstly, should anything be done and if so, what criteria should be used to choose the priorities?A SWOT analysis is one way way to identify goals. Strengths/weeknesses, opportunities/threats are the positive/negative pairs. We have to build our strength and perceive and take opportunities while at the same time countering weaknesses and threats.It is a threat that the industry sets a moving target of IT capability without wanting to meet its cost. It is an opportunity that only a few practices will be at the leading edge and that they will secure the key projects. IT could help us to overcome technical weaknesses and liability and reduce staff and premises costs. It could also increase our exposure to fixed capital costs in a cyclical business. IT could increase the success of integrated practice or it could make it easier for separate firms. We believe the likelihood is that IT will do as it has for financial services and favour the large, multi-national, well prepared and technologically advanced firms. New services will emerge and become assential and will separate the `sheep from the goats.'
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	d2e0
id	d2e0
authors	Horne M, Hill R, Underwood C
year	1997
title	Visualisation of Photovoltaic Clad Buildings
source	International Conference on Information Visualisation -IV 97, London, 27-29 August 1997, ISBN 0 8186 8076 8
summary	This paper describes a study carried out to investigate the capabilities of computer aided design software for the visualisation of building elevations and detail, with focus on the representation of photovoltaic cells in facade architecture. The development of photovoltaic (PV) technology, converting energy from sunlight into electricity, has resulted in the emergence of PV as a building material. This has generated much debate on the aesthetic implications of PV integrated buildings. PV introduces a particularly complex set of requirements not present in traditional cladding materials. As well as the physical characteristics of the material, there is a need to consider factors such as orientation to the sun, and shadows cast by neighbouring buildings. Architects, engineers, developers, clients and the general public all need to be able to visualise proposed designs, either of new or refurbished buildings. This study investigates both the process and end results of computer visualisation in the context of photovoltaic clad buildings.
keywords	Visualisation, PV, CAD evaluation
series	other
type	normal paper
email
last changed	2006/06/08 22:54

_id	742e
authors	Hsieh, T.
year	1997
title	The economic implications of subcontracting practice on building prefabrication
source	Automation in Construction 6 (3) (1997) pp. 163-174
summary	Pressured by labor shortage, quality requirements and tight construction schedules, building constructors are seeking innovative technology to tackle these unfriendly conditions while achieving the targeted profit. For the past decades, technologies related to building prefabrication are being incorporated into conventional construction methods for producing more favorable results. When building prefabrication method is adopted, the organization of the construction team, particularly related to the subcontracting practice, is also subject to change. This paper examines the impact of such changes due to the adoption of building prefabrication technology. This paper first reviews the subcontracting practices in the construction industry. Then, a conceptual economic model of the contractor-subcontractor relationship is developed and is used to explore the economic implications of prefabrication to the subcontracting practice. In the section that follows, a summary discussion on the cost structure and risk sharing nature of building prefabrication is provided. The major conclusion in this research is that the general contractor can not maximize its benefit by conventional subcontracting practice, since the basic elements of the contractor-subcontractor relationship are changed. Based on the analysis and the case study in this paper, it is inferred that in order to achieve maximum benefits through prefabrication, vertically integrating or internalizing the prefabrication subcontractor into the general contractor's organization is preferable.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	63bb
authors	Kokosalakis, J., Brown, G. and Moorhouse, J.
year	1997
title	Incremental Reflective Learning and Innovative Practice in Electronic Design Media
doi	https://doi.org/10.52842/conf.ecaade.1997.x.u1q
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper discusses the impact of a continuously developing CAAD learning strategy, describing in detail a few of these principles, and considering their dynamic impact through deeper more lasting learning, feeding a substantial intensification in the application of Architectural Designing with Computers, changing design methods with interesting analytical and creative results.Aspects of the CAAD teaching discussed include extended collaboration between CAAD and design tutors in defining learning outcomes and tutoring the students’ application of CAAD to design projects, inclusion of CAAD within traditional interim reviews and feedback for design projects and bringing emphasis on conceptual principles, structuring the model and simple programming into earlier stages of the teaching programme and a simple excursion into programming. Studio project examples indicate the interplay between teaching, learning and achievement. Some evidence is explored in greater detail. from the "Interstitial Layers" project utilising the appropriateness of CAAD to store and switch the visibility of spatial data in endless permutations and extensive combinations for mapping, analysing and strategically projecting patterns of city centre activities, fabric and space. Students’ demonstrate a dynamic command of CAAD: as a vehicle for conceptual design, a device to analytically review, criticise and modify the design, as a means to explain design ideas to tutors and to develop and detail final building designs. Reciprocal valuing of quality CAAD achievement between architecture students and staff is seen to be contributing to involvement and motivation, reinforcing striving for equality of achievement. Reference to a further strand of the new methodology considers the impact of tutoring based in researcher findings from video case study precedents of architects practising creative design through use of computers, on a more open, effective development of the architecture students’ own designing processes, culminating in interesting design work.
keywords	Incremental Learning, Understanding, CAAD-Design Approaches, Retention, Feedback, Review, Urban Spatial Forms, Spatial Analysis, "Interstitial Layers", Patterns, Conceptual Electronic Designing, Creative Innovation, Equality and Sharing
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/kokosa/jmup01.htm
last changed	2022/06/07 07:50

_id	ce1b
authors	Kvan, Th., Lee, A. and Ho, L.
year	2000
title	Anthony Ng Architects Limited: Building Towards a Paperless Future
source	Case Study and Teaching Notes number 99/65, 10 pages, distributed by HKU Centre for Asian Business Cases, Harvard Business School Publishing (HBSP) and The European Case Clearing House (ECCH), June 2000
summary	In early 1997; Mr. Anthony Ng; managing director of Anthony Ng Architects Ltd.; was keenly looking forward to a high-tech; paperless new office; which would free his designers from paperwork and greatly improve internal and external communication – a vision that he had had for a couple of years. In 1996; he brought on board a friend and expert in Internet technology to help him realise his vision. In July 1997; his company was to move into its new office in Wan Chai. Their plan was to have in place an Intranet and a web-based document management system when they moved into the new office. But he had to be mindful of resulting changes in communication patterns; culture and expectations. Resistance from within his company was also threatening to ruin the grand plan. Several senior executives were fiercely opposed to the proposal and refused to read a document off a computer screen. But Ng knew it was an important initiative to move his practice forward. Once the decision was made there would be no chance to reconsider; given the workload demands of the new HK$12 billion project. And this decision would mark a watershed in the company’s evolution. This case study examines the challenges and implications of employing IT to support an architectural office.
keywords	IT In Practice; Professional Practice; Archives
series	other
email
last changed	2002/11/15 18:29

_id	6577
authors	Lam, K.P., Mahdavi A. and Pal, V.
year	1997
title	Algorithm and Context: A Case Study of Reliability in Computational Daylight Modeling
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 331-344
summary	The systematic use of reliable modeling data is believed to improve the building design quality. The key term here is "reliability". There is general agreement that reliability in the context of modeling- assisted CAAD depends on the accurate description of both contextual parameters (climate, site, etc.) and ~building features (geometric and non-geometric properties) as well as the validity of the underlying simulation algorithms. In this paper, we specifically address the importance of detailed contextual information and computational algorithms for the reliability of the daylight modeling results.
series	CAAD Futures
email
last changed	2003/02/26 17:26

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ac52
authors	Shih, Naai-Jung and Yan, Chie-Shan
year	1997
title	A Study of the Location of Fire Egress Signs by VR Simulation
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 311-316
summary	The purpose of this paper is to present a suggestion for the location of fire egress signs along a corridor in a building. The suggestion is made based on a virtual reality simulation of human behavior while rooms are on fire, particularly in a public Karaoka TV entertainment center (KTV). Both the rooms and smoke were modeled to simulate similar situations in which people were asked to find their routes to an egress. Case studies were made of the occurrence of two local severe fire disasters, the official investigation of damages, and related building codes. The simulation concluded that the traditional designation of egress signs at a higher location or just above the door frame may be not function appropriately in indicating the location of exit in case of fire. Since smoke is usually lighter than air and is accumulated closer to the ceiling level, either human vision or egress signs are very likely to be blocked by the darkness of smoke. Vision is additionally restricted because people are suggested to lower their body position to avoid smoke while escaping. Suggestion of alternate location of signage is also made in the research.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	0e8f
authors	Alavalkama, I. and Siitonen, P.
year	1997
title	Developing a new endoscopy laboratory with digital tools.
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	Tampere School of Architecture had to leave its old down-town building and move to the TU Tampere university campus in Hervanta, 10 km away. In this process, the 20 years old endoscopic system "The Urban Simulator" was one of the victims. Old mechanical parts and especially the original home-built microcomputer system were too old to compete with modern computer-aided methods. A new endoscopical system is now under construction, using all of the 20-year experience, new technical components and computers for camera control and picture processing. Real-material modelling is used together with computer-aided planning and visualization methods taking the best from both sides.
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	34b8
authors	Batie, D.L.
year	1997
title	The incorporation of construction history in architectural history: the HISTCON interactive computer program
source	Automation in Construction 6 (4) (1997) pp. 275-285
summary	Current teaching methods for architectural history seldom embrace building technology as an essential component of study. Accepting the premise that architectural history is a fundamental component to the overall architectural learning environment, it is argued that the study of construction history will further enhance student knowledge. This hypothesis created an opportunity to investigate how the study of construction history could be incorporated to strengthen present teaching methods. Strategies for teaching architectural history were analyzed with the determination that an incorporation of educational instructional design applications using object-oriented programming and hypermedia provided the optimal solution. This evaluation led to the development of the HISTCON interactive, multimedia educational computer program. Used initially to teach 19th Century iron and steel construction history, the composition of the program provides the mechanism to test the significance of construction history in the study of architectural history. Future development of the program will provide a method to illustrate construction history throughout the history of architecture. The study of architectural history, using a construction oriented methodology, is shown to be positively correlated to increased understanding of architectural components relevant to architectural history and building construction.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a8b4
authors	Bridges, A.H.
year	1997
title	Implications of the Internet for the construction industry
source	Automation in Construction 6 (1) (1997) pp. 45-49
summary	This paper is an adaptation of a section of the Building IT 2005 multimedia CD-ROM (Building IT 2005, Construction IT Forum, Cambridge, 1995). The paper discusses the implications of network technology for the construction industry. Introductory material about the Internet (and links to interesting resources) is included in the publication cited and a much more extensive guide is available in A.H. Bridges, The Construction Net, E. & FN Spon, London 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	cabb
authors	Broughton, T., Tan, A. and Coates, P.S.
year	1997
title	The Use of Genetic Programming In Exploring 3D Design Worlds - A Report of Two Projects by Msc Students at CECA UEL
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 885-915
summary	Genetic algorithms are used to evolve rule systems for a generative process, in one case a shape grammar,which uses the "Dawkins Biomorph" paradigm of user driven choices to perform artificial selection, in the other a CA/Lindenmeyer system using the Hausdorff dimension of the resultant configuration to drive natural selection. (1) Using Genetic Programming in an interactive 3D shape grammar. A report of a generative system combining genetic programming (GP) and 3D shape grammars. The reasoning that backs up the basis for this work depends on the interpretation of design as search In this system, a 3D form is a computer program made up of functions (transformations) & terminals (building blocks). Each program evaluates into a structure. Hence, in this instance a program is synonymous with form. Building blocks of form are platonic solids (box, cylinder, etc.). A Variety of combinations of the simple affine transformations of translation, scaling, rotation together with Boolean operations of union, subtraction and intersection performed on the building blocks generate different configurations of 3D forms. Using to the methodology of genetic programming, an initial population of such programs are randomly generated,subjected to a test for fitness (the eyeball test). Individual programs that have passed the test are selected to be parents for reproducing the next generation of programs via the process of recombination. (2) Using a GA to evolve rule sets to achieve a goal configuration. The aim of these experiments was to build a framework in which a structure's form could be defined by a set of instructions encoded into its genetic make-up. This was achieved by combining a generative rule system commonly used to model biological growth with a genetic algorithm simulating the evolutionary process of selection to evolve an adaptive rule system capable of replicating any preselected 3D shape. The generative modelling technique used is a string rewriting Lindenmayer system the genes of the emergent structures are the production rules of the L-system, and the spatial representation of the structures uses the geometry of iso-spatial dense-packed spheres
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	c1ad
authors	Cheng, Nancy Yen-wen
year	1997
title	Teaching CAD with Language Learning Methods
doi	https://doi.org/10.52842/conf.acadia.1997.173
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 173-188
summary	By looking at computer aided design as design communication we can use pedagogical methods from the well-developed discipline of language learning. Language learning breaks down a complex field into attainable steps, showing how learning strategies and attitudes can enhance mastery. Balancing the linguistic emphases of organizational analysis, communicative intent and contextual application can address different learning styles. Guiding students in learning approaches from language study will equip them to deal with constantly changing technology. From overall curriculum planning to specific exercises, language study provides a model for building a learner-centered education. Educating students about the learning process, such as the variety of metacognitive, cognitive and social/affective strategies can improve learning. At an introductory level, providing a conceptual framework and enhancing resource-finding, brainstorming and coping abilities can lead to threshold competence. Using kit-of-parts problems helps students to focus on technique and content in successive steps, with mimetic and generative work appealing to different learning styles. Practicing learning strategies on realistic projects hones the ability to connect concepts to actual situations, drawing on resource-usage, task management, and problem management skills. Including collaborative aspects in these projects provides the motivation of a real audience and while linking academic study to practical concerns. Examples from architectural education illustrate how the approach can be implemented.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6b4a
authors	Ekholm, Anders and Fridqvist Sverker
year	1997
title	Concepts of Space in Computer Based Product Modelling and Design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.c5r
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The everyday understanding of space may be self-evident and unproblematic. However, as soon as we are asked for a formal definition, e.g. in the context of building classification or product modelling, the concept of space is subject of controversy and misunderstanding. To some, space is the emptiness in which things are embedded, i.e. something immaterial. To others, space has no separate existence but is a property of the material world. Still, according to both views, space can be experienced. In this paper we analyse some influential work within building classification and building product modelling and criticise these for applying a concept of space without factual reference. We explore the ontological foundations for the concept of space, and conclude that space is an aspect view on things; depending on the view, it may be seen both as a property of things and as a thing in itself. Finally we show how construction space can be represented as an object in a conceptual schema for computer based space information.
keywords	Space, Building, Construction, Classification, Product Modelling, Aspect Model, Spatial Modelling, CAD
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/ekholm/ekholm.htm
last changed	2022/06/07 07:50

_id	ce97
authors	Faconti, D., Giacchin V. and Pellitteri, G.
year	1997
title	On-line Handbook to Support Brickwork Design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.v9i
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	Computer assistants to building design are more and more oriented to construct repertories of cases to be recalled as possible suggestions to a real design situation. For this purpose it is necessary that the cases be described by the parameters most apt to describe the design situations. In this way it will be possible to extract out of the repertory the existing case most akin to the design problem the designer is dealing with. This kind of help is the most fit to the usual behaviour of a designer which, in order to find the best solution to a design problem, resort to his culture, his knowledge of real cases, which he tries to adapt to the peculiar need of his present case. This paper presents an attempt to construct such a tool also if restricted to only one building component: the exterior brickwork. It is structured as an Hypertext, which allows a net of relationships much richer than the one of a conventional handbook.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/faconti/faconti.htm
last changed	2022/06/07 07:50

_id	e821
authors	Hartkopf, V., Loftness, V., Mahdavi, A., Lee, S. and Shankavaram, J.
year	1997
title	An integrated approach to design and engineering of intelligent buildings--The Intelligent Workplace at Carnegie Mellon University
source	Automation in Construction 6 (5-6) (1997) pp. 401-415
summary	In the past few years, there have been significant advances made in the design and engineering of "intelligent" workplaces, buildings that not only accommodate major advances in office technology but provide better physical and environmental settings for the occupants. This paper will briefly present recent approaches to the creation of innovative environments for the advanced workplace. The architectural and engineering advances demonstrated in Japan, Germany, North America, the United Kingdom, and France can be summarized in four major system categories: (1) enclosure innovations including approaches to load balancing, natural ventilation, and daylighting; (2) heating, ventilation and air-conditioning (HVAC) system innovations including approaches to local control and improved environmental contact; (3) data/voice/power "connectivity" innovations; and (4) interior system innovations, including approaches to workstation and workgroup design for improved spatial, thermal, acoustic, visual, and air quality. In-depth international field studies of over 20 intelligent office buildings have been carried out by a multidisciplinary expert team of the Advanced Building Systems Integration Consortium (ABSIC) based at Carnegie Mellon University. ABSIC is a university-industry-government partnership focused on the definition and development of the advanced workplace. The ABSIC field team evaluated the component and integrated system innovations for their multidimensional performance qualities, through expert analysis, occupancy assessments, and field diagnostics.Based on the results of the case studies and building on the most recent technological advances, the ABSIC team developed the concepts for the Intelligent Workplace, a 7000 square foot living laboratory of office environments and innovations. This project is now under construction at Carnegie Mellon University and its features are discussed in the second section of this paper.
series	journal paper
email
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: