Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 516

Reformat results as: short short into frame detailed detailed into frame

_id	diss_marsh
id	diss_marsh
authors	Marsh, A.J.
year	1997
title	Performance Analysis and Conceptual Design
source	School of Architecture and Fine Arts, University of Western Australia
summary	A significant amount of the research referred to by Manning has been directed into the development of computer software for building simulation and performance analysis. A wide range of computational tools are now available and see relatively widespread use in both research and commercial applications. The focus of development in this area has long been on the accurate simulation of fundamental physical processes, such as the mechanisms of heat flow though materials, turbulent air movement and the inter-reflection of light. The adequate description of boundary conditions for such calculations usually requires a very detailed mathematical model. This has tended to produce tools with a very engineering-oriented and solution-based approach. Whilst becoming increasingly popular amongst building services engineers, there has been a relatively slow response to this technology amongst architects. There are some areas of the world, particularly the UK and Germany, where the use of such tools on larger projects is routine. However, this is almost exclusively during the latter stages of a project and usually for purposes of plant sizing or final design validation. The original conceptual work, building form and the selection of materials being the result of an aesthetic and intuitive process, sometimes based solely on precedent. There is no argument that an experienced designer is capable of producing an excellent design in this way. However, not all building designers are experienced, and even fewer have a complete understanding of the fundamental physical processes involved in building performance. These processes can be complex and often highly inter-related, often even counter-intuitive. It is the central argument of this thesis that the needs of the building designer are quite different from the needs of the building services engineer, and that existing building design and performance analysis tools poorly serve these needs. It will be argued that the extensive quantitative input requirement in such tools acts to produce a psychological separation between the act of design and the act of analysis. At the conceptual stage, building geometry is fluid and subject to constant change, with solid quantitative information relatively scarce. Having to measure off surface areas or search out the emissivity of a particular material forces the designer to think mathematically at a time when they are thinking intuitively. It is, however, at this intuitive stage that the greatest potential exists for performance efficiencies and environmental economies. The right orientation and fenestration choice can halve the airconditioning requirement. Incorporating passive solar elements and natural ventilation pathways can eliminate it altogether. The building form can even be designed to provide shading using its own fabric, without any need for additional structure or applied shading. It is significantly more difficult and costly to retrofit these features at a later stage in a project’s development. If the role of the design tool is to serve the design process, then a new approach is required to accommodate the conceptual phase. This thesis presents a number of ideas on what that approach may be, accompanied by some example software that demonstrates their implementation.
series	thesis:PhD
more	http://www.squ1.com/site.html
last changed	2003/11/28 07:33

_id	eb53
authors	Asanowicz, K. and Bartnicka, M.
year	1997
title	Computer analysis of visual perception - endoscopy without endoscope
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	This paper presents a method of using computer animation techniques in order to solve problems of visual pollution of city environment. It is our observation that human-inducted degradation of city environmental results from well - intentioned but inappropriate preservation actions by uninformed designers and local administration. Very often, a local municipality administration permits to build bad-fitting surroundings houses. It is usually connected with lack of visual information's about housing areas of a city, its features and characteristics. The CAMUS system (Computer Aided Management of Urban Structure) is being created at the Faculty of Architecture of Bialystok Technical University. One of its integral parts is VIA - Visual Impact of Architecture. The basic element of this system is a geometrical model of the housing areas of Bialystok. This model can be enhanced using rendering packages as they create the basis to check our perception of a given area. An inspiration of this approach was the digital endoscopy presented by J. Breen and M. Stellingwerff at the 2nd EAEA Conferences in Vienna. We are presenting the possibilities of using simple computer programs for analysis of spatial model. This contribution presents those factors of computer presentation which can demonstrate that computers achieve such effects as endoscope and often their use be much more efficient and effective.
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	2698
authors	Chien, Sheng Fen and Flemming, Ulrich
year	1997
title	Information Navigation in Generative Design Systems
doi	https://doi.org/10.52842/conf.caadria.1997.355
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 355-365
summary	Generative design systems take an active part in the generation of computational design models. They make it easier for designers to explore conceptual alternatives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed to enable designers to access the information with ease and low cognitive loads. We present an approach to support navigation in generative design systems. Our approach takes account of studies related to navigation in physical environments as well as information navigation in electronic media. Results of studies from the physical environment and electronic media reveal that 1) people exhibit similar cognitive behaviours (spatial cognition and the use of spatial knowledge) while navigating in physical and information spaces; and 2) the information space lacks legibility and imageability. The proposed information navigation model take these findings into account.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	2354
authors	Clayden, A. and Szalapaj, P.
year	1997
title	Architecture in Landscape: Integrated CAD Environments for Contextually Situated Design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.q6p
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper explores the future role of a more holistic and integrated approach to the design of architecture in landscape. Many of the design exploration and presentation techniques presently used by particular design professions do not lend themselves to an inherently collaborative design strategy. Within contemporary digital environments, there are increasing opportunities to explore and evaluate design proposals which integrate both architectural and landscape aspects. The production of integrated design solutions exploring buildings and their surrounding context is now possible through the design development of shared 3-D and 4-D virtual environments, in which buildings no longer float in space. The scope of landscape design has expanded through the application of techniques such as GIS allowing interpretations that include social, economic and environmental dimensions. In architecture, for example, object-oriented CAD environments now make it feasible to integrate conventional modelling techniques with analytical evaluations such as energy calculations and lighting simulations. These were all ambitions of architects and landscape designers in the 70s when computer power restricted the successful implementation of these ideas. Instead, the commercial trend at that time moved towards isolated specialist design tools in particular areas. Prior to recent innovations in computing, the closely related disciplines of architecture and landscape have been separated through the unnecessary development, in our view, of their own symbolic representations, and the subsequent computer applications. This has led to an unnatural separation between what were once closely related disciplines. Significant increases in the performance of computers are now making it possible to move on from symbolic representations towards more contextual and meaningful representations. For example, the application of realistic materials textures to CAD-generated building models can then be linked to energy calculations using the chosen materials. It is now possible for a tree to look like a tree, to have leaves and even to be botanicaly identifiable. The building and landscape can be rendered from a common database of digital samples taken from the real world. The complete model may be viewed in a more meaningful way either through stills or animation, or better still, through a total simulation of the lifecycle of the design proposal. The model may also be used to explore environmental/energy considerations and changes in the balance between the building and its context most immediately through the growth simulation of vegetation but also as part of a larger planning model. The Internet has a key role to play in facilitating this emerging collaborative design process. Design professionals are now able via the net to work on a shared model and to explore and test designs through the development of VRML, JAVA, whiteboarding and video conferencing. The end product may potentially be something that can be more easily viewed by the client/user. The ideas presented in this paper form the basis for the development of a dual course in landscape and architecture. This will create new teaching opportunities for exploring the design of buildings and sites through the shared development of a common computer model.
keywords	Integrated Design Process, Landscape and Architecture, Shared Environmentsenvironments
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/szalapaj/szalapaj.htm
last changed	2022/06/07 07:50

_id	db13
authors	Jacobsen, K., Eastman, C. and Tay, S.J.
year	1997
title	Information management in creative engineering design and capabilities of database transactions
source	Automation in Construction 7 (1) (1997) pp. 55-69
summary	This paper examines the information management requirements and sets forth the general criteria for collaboration and concurrency control in creative engineering design. Our work attempts to recognize the full range of concurrency, collaboration and complex transactions structure now practiced in manual and semi-automated design and the range of capabilities needed as the demands for enhanced but flexible electronic information management unfolds.The objective of this paper is to identify new issues that may advance the use of databases to support creative engineering design. We start with a generalized description of the structure of design tasks and how information management in design is dealt with today. After this review, we identify extensions to current information management capabilities that have been realized and/or proposed to support/augment what designers can do now.Given this capability-based starting point, we review existing database and information management capabilities, as presented in the literature. In the review, we identify the gaps between current concurrency and collaboration technology and what is needed or would be desirable. Our objective is to assess current research and to identify new issues that may advance the use of databases to support creative engineering design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	0f97
authors	Kvan, Th., West, R. and Vera, A.
year	1997
title	Choosing Tools for a Virtual Community
source	Creative Collaboration in Virtual Communities 1997, ed. A. Cicognani. VC'97. Sydney: Key Centre of Design Computing, Department of Architectural and Design Science, University of Sydney, 20 p.
summary	This paper reports on the results of experiments carried out to identify the effects of computer-mediated communication between participants involved in a design problem. When setting up a virtual design community, choices must be made between a variety of tools, choices dictated by budget, bandwidth, ability, availability. How do you choose between the tools, which is useful and how will each affect the outcome of the design exchanges you plan? Cognitive modelling methodologies such as GOMS have been used by interface designers to capture the mechanisms of action and interaction involved in routine expert behavior. Using this technique, which breaks down an individual's behaviors into Goals, Operators, Methods, and Selection rules, it is possible to evaluate the impact of different aspects of an interface in task-specific ways. In the present study, the GOMS methodology was used to characterize the interactive behavior of knowledgeable participants as they worked on a design task under different communication-support conditions. Pairs of participants were set a design problem and asked to solve it in face-to-face settings. The same problem was then tackled by participants in settings using two different modes of computer-supported communication: email and an electronic whiteboard. Protocols were collected and analyzed in terms of the constraints of each tool relative to the task and to each other. The GOMS methodology was used as a way to represent the collaborative design process in a way that yields information on both the productivity and performance of participants in each of the three experimental conditions. It also yielded information on the component elements of the design process, the basic cognitive building-blocks of design, thereby suggesting fundamentally new tools that might be created for interaction in virtual environments. A further goal of the study was to explore the nature of task differences in relation to alternative platforms for communication. It was hypothesized that design processes involving significant negotiation would be less aided by computer support than straight forward design problems. The latter involve cooperative knowledge application by both participants and are therefore facilitated by information-rich forms of computer support. The former, on the other hand, requires conflict resolution and is inhibited by non face-to-face interaction. The results of this study point to the fact that the success of collaboration in virtual space is not just dependent on the nature of the tools but also on the specific nature of the collaborative task.
keywords	Cognitive Models, Task-analysis, GOMS
series	other
email
last changed	2003/05/15 20:50

_id	6cb4
authors	Leupen, B., Grafe, C., Körnig, N., Lampe, M. and De Zeeuw, P.
year	1997
title	Design and Analysis
source	New York: Van Nostrand Reinhold
summary	Design and Analysis by Bernard Leupen, Christoph Grafe, Nicola Körnig, Marc Lampe, and Peter de Zeeuw Design and Analysis is an insightful, interdisciplinary exploration of the diversity of analytic methods used by architects, designers, urban planners, and landscape architects to understand the structure and principles of the built environment. Developed by a team headed by Bernard Leupen at Delft University of Technology, The Netherlands, Design and Analysis defies borders of history, geography, and discipline, tracing the evolution of design principles from ancient Greece to the 20th century. "Only methodical analysis gives us an insight into the design process," states architect Bernard Tschumi. Using historical examples from architecture, urban design, and landscape architecture, Design and Analysis defines an ordered system that enables the design student or professional to identify the factors that influence designers' decisions, and shows how to relate them to the finished project. Design and Analysis is organized into six chapters that correspond to these factors: order and composition, functionality, structure, typology, context, and analytical techniques. The authors introduce the analytical drawing as a time-tested means to obtaining insight into the design process. Over 100 line drawings are featured in all. Using contemporary architectural examples to teach ancient design principles, Design and Analysis is more than just an introduction to analytical methods. The authors give an outline of space design as a whole, from individual buildings to urban and landscape ensembles. Though primarily intended for design students to help them appreciate many of the issues that they will face as professionals, Design and Analysis's broad, easy-to-read approach makes it an invaluable handbook for designers of all disciplines.
series	other
last changed	2003/04/23 15:14

_id	43b3
authors	Mccall, R., Johnson, E. and Smith, M.
year	1997
title	Hypersketching: Design As Creating a Graphical Hyperdocument
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 849-854
summary	There are empirical and theoretical reasons for believing that current CAD does not adequately support the early, conceptual stages of design. Hand-done design drawing has a several advantages over current, CAD-based approaches to generating form in these stages. One advantage is the indeterminacy of hand drawing--i.e., its abstractness and ambiguity. Another is a non-destructive drawing process, where new drawings are created without modifying old ones. A third is designers' creation of large collections of inter-related drawings--i.e., graphical hyperdocuments. A fourth is the unobtrusive character of conventional drawing tools. We have created two prototypes that incorporate these features into a new type of CAD based on sketching with electronic pens on LCD tablets. The first prototype, called HyperSketch., is a stand-alone system that simulates tracing paper. It creates a hypermedia network in which the nodes are sketches and the links are primarily traced-from relationships recorded automatically by the system. The second prototype adds the HyperSketching functionality to our existing PHIDIAS HyperCAD system. This aids design by using the sketches to index and retrieve multimedia information that is useful for a variety of design tasks.
series	CAAD Futures
last changed	1999/04/06 09:19

_id	3e1c
authors	Mortenson, M.E.
year	1997
title	Geometric Modeling
source	New York: Wiley Computer Publishing
summary	A comprehensive, up-to-date presentation of all the indispensable core concepts of geometric modeling. Now completely updated to reflect the most recent developments in the field, Geometric Modeling clearly presents and compares all the important mathematical approaches to modeling curves, surfaces, and solids, and shows how to shape and assemble these elements into more complex models. Its thorough coverage also includes the concomitant geometric processing necessary, e.g., the computation of intersections, offsets, and fillets. Written in a style that is virtually free of the jargon of special applications, this unique book focuses on the essence of geometric modeling and treats it as a discipline in its own right. This integrated approach allows the reader to focus on the principles and logic of geometric modeling without requiring background knowledge of CAD/CAM, computer graphics, or computer programming. Supported by more than 300 illustrations, Geometric Modeling appeals to the reader's visual and intuitive skills in a way that makes understanding the more abstract concepts much easier. This new edition features a host of new application areas, including topology, special effects in cinematography, the design and control of type fonts, and virtual reality, as well as numerous application examples. For computer graphics specialists, application designers and developers, scientific programmers, and advanced students, Geometric Modeling, Second Edition will serve as a complete and invaluable guide to the entire field.
series	other
last changed	2003/04/23 15:14

_id	05fc
authors	Park, Hoon
year	1997
title	Cyber Design Studio: Using Manual Media Via Internet Connections for Collaborative Design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.c9n
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This article explores how Computer Aided Design (CAD) systems can be applicable and integrated into the early stage of design. CAD systems are still technologies that are not broadly accepted as useful to the designer especially in this stage of design because CAD systems use the monitor and mouse which differ from the sketch paper and pen of manual media. This article discusses how manual media and Computer-Mediated Communication (CMC) technologies - video conferencing, in my examples - that employ multimedia and Internet can empower designers by providing them with new ways of working together. For accommodating this approach, a prototype CAD system has been developed in which the system consists of a conventional drawing and extra capabilities. This system allows the designer to work with computer based and paper based tools in the same conventional environment as well as remote communications between the designers. This environment is used as the setting for a case study of design tutorials in the design studio. The analysis of this work provides interesting insight into the traditional roles of design studio as well as the relationship between digital and manual media.
keywords	Cyber Design Studio, Collaborative Design
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/parkh/parkhoon.htm
last changed	2022/06/07 07:50

_id	dcd2
authors	Salama, A.
year	1997
title	New Trends in Architectural Education: Designing the Design Studio
source	The Anglo-Egyptian Bookstore, Cairo Egypt
summary	New Trends in Architectural Education presents a wide range of innovative concepts and practical methods for teaching architectural design, together with examples of different studio teaching. It traces the roots of architectural education, several disparate ideas, and strategies of design teaching practices including the Ecole Des Beaux-Arts and the Bauhaus. This book offers a comparative analysis of contemporary trends that are committed to shaping and identifying studio objectives and processes. It explores different aspects of studio teaching and what impact they have on attitudes, skills, methods, and tools of designers. New Trends in Architectural Education calls for a fresh look at design education in architecture, where the author proposes an approach within which architectural educators can envision and evaluate the needs of future architects and the type of education that satisfies those needs.
series	other
last changed	2003/04/23 15:14

_id	e941
authors	Sariyildiz, Sevil, Durmisevic, Sanja and Ploco, Jasmina
year	1997
title	Pattern Grammar within the Language of Architecture
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 299-311
summary	Technology plays an important role in the design and designing process, influencing the architectural expressions and giving an impulse to new developments of architectural language. It has been allways the stimulating push for the generation of new concepts, spaces and technics in architectural design. Especially the developments, in the field of material technology and construction industry. Lately, Information and Communication Technology (ICT) pledge to have an important impact on designing practice as well as a part of the technological developments. In order to widen the application of CAAD in designers realm, it is necessary to interpose new design tools and methods. This means introducing CAAD more as a "designing tool" and making its employment feasible from the very first stages of design process - during the conceptual phase. Pattern Grammars, which we will introduce in this paper is such a method that provides support to designers, architects and urban planners. These patterns, based on complex 3D spatial geometrical polyhedra and polytopes, when generated, have form and structure at the same time. Parallel with geometry creation, aspects such as accessibility, functionality and integrity of a building should be taken in consideration as well. Working with pattern grammar within CAAD environment, enables faster generating of concepts and examination of spatial qualities, offering at the same time higher standards of design flexibility and enormous variety. It also introduces new design approaches to stimulate the innovative ideas concerning the design. This, altogether, represents an added value of CAAD.
keywords	CAAD Tools, Pattern Grammar, Substitution Method
series	AVOCAAD
last changed	2005/09/09 10:48

_id	c61f
authors	Stellingwerff, M.C.
year	1997
title	Changing approaches to the Real World
source	Published in the book : 'CAAD - Towards New Design Conventions', Technical University of Bialystok, Poland, Edited by Aleksander Asanowicz and Adam Jakimowicz. ISBN83-86272-63-5.
summary	Different kinds of design media change the designers approach to the 'real world' and have an important impact on the design process and its results. Six main directions are described and evaluated: design through contemplation, design by means of traditional media, design using desktop computers, design within a virtual reality environment, design with ubiquitous computers and design through augmented interaction. A number of these directions are still developing in unexpected ways, other directions are established and seem to become less interesting for research and in design. The goal of this paper is to value and characterise each above mentioned direction, relate each direction to 'reality', 'mind' and 'media' and place each of them in a historical / futurological sequence.
keywords	design, computers, interaction, reality, mind, media, future
series	other
email
more	http://www.bk.tudelft.nl/media/papers/approaches.html
last changed	1998/07/08 13:08

_id	8c6f
authors	Zarnowiecka, J.
year	1997
title	Information Structures in the Designing Process
doi	https://doi.org/10.52842/conf.ecaade.1997.x.q5q
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	Nowadays we deal with a real revolution in the computer science. Present times explorers no longer look for information in vast library files but rather they surf on Internet. The technological progress in the realm of computer studies made “the fathers unable to keep pace with their children”. That’s one of the reasons why it is so difficult to introduce new techniques into the routinized designing process. The problem is that some know “what” and the others “how”. At the times when drawing pens were ousted by rapidographs, communication between different generations of designers was easier. Both of these tools are, in fact very similar. It is the other way with the new computer science technique, which consists of complicated systems not so easy to access because of various economical, emotional, routine and habitual reasons. Changes in the designing process go step by step, in a much slower pace than the progress in computer hardware and software. It is difficult to accept the fact in professional environment that computer technique can assist the designer as a medium.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/zarnow/zarnow.htm
last changed	2022/06/07 07:50

_id	75a8
authors	Achten, Henri H.
year	1997
title	Generic representations : an approach for modelling procedural and declarative knowledge of building types in architectural design
source	Eindhoven University of Technology
summary	The building type is a knowledge structure that is recognised as an important element in the architectural design process. For an architect, the type provides information about norms, layout, appearance, etc. of the kind of building that is being designed. Questions that seem unresolved about (computational) approaches to building types are the relationship between the many kinds of instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called ‘prototypes’) face problems clarifying these questions. The research work at hand proposes to investigate the role of knowledge associated with building types in the design process.Knowledge of the building type must be represented during the design process. Therefore, it is necessary to find a representation which supports design decisions, supports the changes and transformations of the design during the design process, encompasses knowledge of the design task, and which relates to the way architects design. It is proposed in the research work that graphic representations can be used as a medium to encode knowledge of the building type. This is possible if they consistently encode the things they represent; if their knowledge content can be derived, and if they are versatile enough to support a design process of a building belonging to a type.A graphic representation consists of graphic entities such as vertices, lines, planes, shapes, symbols, etc. Establishing a graphic representation implies making design decisions with respect to these entities. Therefore it is necessary to identify the elements of the graphic representation that play a role in decision making. An approach based on the concept of ‘graphic units’ is developed. A graphic unit is a particular set of graphic entities that has some constant meaning. Examples are: zone, circulation scheme, axial system, and contour. Each graphic unit implies a particular kind of design decision (e.g. functional areas, system of circulation, spatial organisation, and layout of the building). By differentiating between appearance and meaning, it is possible to define the graphic unit relatively shape-independent.If a number of graphic representations have the same graphic units, they deal with the same kind of design decisions. Graphic representations that have such a specifically defined knowledge content are called ‘generic representations.’ An analysis of over 220 graphic representations in the literature on architecture results in 24 graphic units and 50 generic representations. For each generic representation the design decisions are identified. These decisions are informed by the nature of the design task at hand. If the design task is a building belonging to a building type, then knowledge of the building type is required. In a single generic representation knowledge of norms, rules, and principles associated with the building type are used. Therefore, a single generic representation encodes declarative knowledge of the building type. A sequence of generic representations encodes a series of design decisions which are informed by the design task. If the design task is a building type, then procedural knowledge of the building type is used.By means of the graphic unit and generic representation, it is possible to identify a number of relations that determine sequences of generic representations. These relations are: additional graphic units, themes of generic representations, and successive graphic units. Additional graphic units defines subsequent generic representations by adding a new graphic unit. Themes of generic representations defines groups of generic representations that deal with the same kind of design decisions. Successive graphic units defines preconditions for subsequent or previous generic representations. On the basis of themes it is possible to define six general sequences of generic representations. On the basis of additional and successive graphic units it is possible to define sequences of generic representations in themes. On the basis of these sequences, one particular sequence of 23 generic representations is defined.The particular sequence of generic representations structures the decision process of a building type. In order to test this assertion, the particular sequence is applied to the office building type. For each generic representation, it is possible to establish a graphic representation that follows the definition of the graphic units and to apply the required statements from the office building knowledge base. The application results in a sequence of graphic representations that particularises an office building design.Implementation of seven generic representations in a computer aided design system demonstrates the use of generic representations for design support. The set is large enough to provide additional weight to the conclusion that generic representations map declarative and procedural knowledge of the building type.
series	thesis:PhD
email
more	http://alexandria.tue.nl/extra2/9703788.pdf
last changed	2003/11/21 15:15

_id	823f
authors	Bignon, J.C., Halin, G. and Humbert, P.
year	1997
title	Hypermedia Structuring of the Technical Documentation for the Architectural Aided Design
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 843-848
summary	The definition of an universal structuring model of the technical documentation is arduous, indeed utopian considering the great number of products and the diversity of relative information. To answer this situation we are trying to develop a general approach of the documentation. The document is the base entity of documentation structuring and it represents a coherent informative unit. We propose a model of document hypermedia structuring. This model allows the definition, the presentation, the navigation and the retrieval of general information on building products by a document manipulation. It is associated with a hypermedia design method adapted to document management. This method proposes, after the identification of the user, three phases of hypermedia definition : data definition, navigation definition and user interface definition. The model of a hypermedia structuring of the technical documentation proposed in this article is at once independent of available information on products, open, and makes easier the addition of new navigational functions.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	848a
authors	Caneparo, Luca
year	1997
title	Shared Virtual Reality for Architectural Design
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 431-442
summary	The paper presents the implementation of a system of Shared Virtual Reality (SVR) in Internet applied to a large- scale project. The applications of SVR to architectural and urban design are presented in the context of a real project, the new railway junction of Porta Susa and the surrounding urban area in the city centre of Turin, Italy. SVR differs from Virtual Reality in that the experience of virtual spaces is no longer individual, but rather shared across the net with other users simultaneously connected. SVR offers an effective approach to Computer Supported Collaborative Work, because it integrates both the communicative tools to improve collaboration and the distributed environment to elaborate information across the networks.
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	88f9
authors	Carrara, G., Novembri, G., Zorgno, A.M., Brusasco, P.L.
year	1997
title	Virtual Studio of Design and Technology on Internet (I) - Educator's approach
doi	https://doi.org/10.52842/conf.ecaade.1997.x.n2w
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper presents a teaching experience involving students and professors from various universities, in Italy and abroad, which began in 1996 and is still on going. The Virtual Studios on the Internet (VSI) have some features in common with the Teaching Studios planned for the new programme of the faculties of Architecture in Italian universities. These are the definition of a common design theme, and the participation of disciplinary teachers. The greatest difference is in the modes of collaboration, which is achieved through information and communication technologies. The chief result of this is that the various work groups in different places can work and collaborate at the same time: the computer networks provide the means to express, communicate and share the design project.
keywords	CAAD, Teaching of architectural design, Shared virtual reality, Virtualdesign studio, Collective intelligence.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/lvi_i&ii/zorgno.html
last changed	2022/06/07 07:50

_id	b3b1
authors	Ebrahim, Mostafa Abdel-Bary
year	1997
title	Application and evaluation of digital image techniques in close range photogrammetry
source	University of Innsbruck
summary	Most of the orthomapping techniques that are used in the present are restricted to surfaces that arise from a function of 'ground co- ordinates' z = f (x, y) , so-called 2.5D objects. Some techniques are also restricted to surfaces with kind of smooth shape or even to regular surfaces, but all of them are established to rectify images (although increasingly digitally). A new approach has been established for digital restitution and orthomapping of close range objects of almost any shape and size and with almost no restriction to images or objects. The idea of this approach is an inversion of the photographic technique and is (on the contrary to the 'rectification approach') strictly object oriented. All of the objects are regarded to be describable in their geometrical shape by a number of particular faces that can be regular or irregular but can anyway be created in a CAD environment. The data needed to get this surface can come from any photogrammetric, tachometric or other source with any particular one wants to have for the results. All the details that lie on that surface don't have to be restituted by analog or analytical point measurement but can after that be projected onto this surface from any photo, from any side and with any camera they have been taken. A 'Digital Projector' does the projection of the photos from the same positions and with the same inner orientation as of photographic camera. Using this approach any measurements of any details on the facades can be done easily. No details of the object can be neglected, none can be forgotten, no prior filtering of details has preceded this using. The full information of the original photos is available in the results. The results of the restitution can be presented in many ways. One of them is create orthoimages in any scale. Other results are any perspective or parallel view of the object. Other use of the strict 3D map-covered object for visualization (e.g. in architecture and archaeology application) is possible
keywords	Digital Image; Digital Projector; Close Range Photogrammetry; Architectural Photogrammetry; 2.5d Objects; Visualization
series	thesis:PhD
email
more	http://www.arcs.ac.at/dissdb/rn027356
last changed	2003/02/12 22:37

For more results click below: