Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 170

Reformat results as: short short into frame detailed detailed into frame

_id	6112
authors	Daru, Roel and Snijder, H.P.S.
year	1997
title	GACAAD or AVOCAAD? CAAD and Genetic Algorithms for an Evolutionary Design Paradigm
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 145-161
summary	One of the dominant paradigms in architecture is about its creation: it is done by human designers supported by tools like sketching, drawing or modelling and evaluation tools. The Darwinistic paradigm demands a paradigmatic switch from drawing, modelling and evaluation to the breeding of forms with a much more integrated generation and selecting process embedded in the computer machinery. This means a paradigm switch from a designer as the performer of (sketch, draw or modelling) work to a machine driven creation and selection process of forms with the designer as the supervisor, fully entitled to steer the process in some preferred directions. The designer creates by establishing the evolutionary rules and making choices among the architectural creatures emerging in rapid fire modethrough the synthesis performed by the machine. Natural selection is a Metaphor: in fact the designer plays Nature (or God). The creatures allowed to flourish are not adequate according to laws of Nature, but to the judgement of the designer (or to the designing team).
series	AVOCAAD
last changed	2005/09/09 10:48

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	cbe5
authors	Burry, Mark
year	1997
title	The Cost and Value of Animation for Architectural Designers
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 135-144
summary	As computers laboratories or studios in architecture schools provide greater access to fast machines and sophisticated software, the opportunity for computer aided animation increases I dimension. Previously the domain of the most enthusiastic, it has now become a relatively simple task to move from 3D to 4D. If the impediments to a common access to these new possibilities (for architects) are no longer a matter of the cost and availability of hardware and media, what measures the extent to which we can value the contribution of animation to studio-based design? This paper reports on our progress in establishing some practical and theoretical benchmarks comparing the cost with the value of computer aided (or mediated) animation.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	8c7b
authors	Hellgardt, Michael, Klinkenbijl, Wouter and Kundu, Sourav
year	1997
title	Objective casualty - an experiment with recognition and emergence in design practice
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 199-211
summary	Experimentation with an algorithm in practice is presented. Pattern recognition and emergence is controlled through user dialog in this experiment. The next step is to teach the machine to clone human perceptional performances involved with that. Some basic experi- mentation in this field, which is partially inspired by Hofstadters more recent work, is reported. The transcription of the algorithm applied in practice into an ATN (Augmented Transition Network) to be evaluated exhaustively or by means of directed search is presented. Finally problems of connections between the formalisms presented and commercial software are discussed.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	fb8e
authors	Rychter, Zenon
year	1997
title	Objectware: from C++ towards CAD++
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 287-297
summary	Objectware is software supporting the object-oriented paradigm. Object orientation controls complexity through thinking in natural terms. The approach unifies all stages of complex system development: analysis, design, and programming. It applies to software design, from operating systems to CAD packages, as well as all fields of engineering design, CAD based or not. The paper discusses what next generation CAD, object-oriented CAD or CAD++ will be like by studying the philosophy behind the C++ object-oriented programming language, which most CAD++ software developers use.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0d25
authors	Stegen, Guido
year	1997
title	Space Syntax, an Inspiring Design-Tool
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 343-361
summary	The space syntax system which is presented in this paper has been developed to help the designer to evaluate and to define the form of complex spatial environments, especially the urban structures. The system has a double nature. On the one hand, it is a way to consider those environments. On the other hand, it includes a computerized model which calculates, on the basis of morphological properties of the spatial environment, several output- variables which represent measure, in which certain urban phenomena are spatially distributed. Instances of urban phenomena are: circulation, framing, functions, population… These correlations oblige the designer to take into account those urban facets at every stage of the project. The disciplinary fragmentation is then made very difficult for him. Besides, the contradictions or incompatibilities from local-global interests become an integral part of the urbanity. Those correlations re-open also a track which seemed to be abandoned - the one of the functionality of the urban and architectural structures - and, therefore, force the designers to confront their social responsibilities. All this has been made possible thanks to a categorical revision of what is essentially the city. According to the theoretical framework of Space Syntax, environments are above all considered as a distributive system of spaces and less of buildings.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	75a8
authors	Achten, Henri H.
year	1997
title	Generic representations : an approach for modelling procedural and declarative knowledge of building types in architectural design
source	Eindhoven University of Technology
summary	The building type is a knowledge structure that is recognised as an important element in the architectural design process. For an architect, the type provides information about norms, layout, appearance, etc. of the kind of building that is being designed. Questions that seem unresolved about (computational) approaches to building types are the relationship between the many kinds of instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called ‘prototypes’) face problems clarifying these questions. The research work at hand proposes to investigate the role of knowledge associated with building types in the design process.Knowledge of the building type must be represented during the design process. Therefore, it is necessary to find a representation which supports design decisions, supports the changes and transformations of the design during the design process, encompasses knowledge of the design task, and which relates to the way architects design. It is proposed in the research work that graphic representations can be used as a medium to encode knowledge of the building type. This is possible if they consistently encode the things they represent; if their knowledge content can be derived, and if they are versatile enough to support a design process of a building belonging to a type.A graphic representation consists of graphic entities such as vertices, lines, planes, shapes, symbols, etc. Establishing a graphic representation implies making design decisions with respect to these entities. Therefore it is necessary to identify the elements of the graphic representation that play a role in decision making. An approach based on the concept of ‘graphic units’ is developed. A graphic unit is a particular set of graphic entities that has some constant meaning. Examples are: zone, circulation scheme, axial system, and contour. Each graphic unit implies a particular kind of design decision (e.g. functional areas, system of circulation, spatial organisation, and layout of the building). By differentiating between appearance and meaning, it is possible to define the graphic unit relatively shape-independent.If a number of graphic representations have the same graphic units, they deal with the same kind of design decisions. Graphic representations that have such a specifically defined knowledge content are called ‘generic representations.’ An analysis of over 220 graphic representations in the literature on architecture results in 24 graphic units and 50 generic representations. For each generic representation the design decisions are identified. These decisions are informed by the nature of the design task at hand. If the design task is a building belonging to a building type, then knowledge of the building type is required. In a single generic representation knowledge of norms, rules, and principles associated with the building type are used. Therefore, a single generic representation encodes declarative knowledge of the building type. A sequence of generic representations encodes a series of design decisions which are informed by the design task. If the design task is a building type, then procedural knowledge of the building type is used.By means of the graphic unit and generic representation, it is possible to identify a number of relations that determine sequences of generic representations. These relations are: additional graphic units, themes of generic representations, and successive graphic units. Additional graphic units defines subsequent generic representations by adding a new graphic unit. Themes of generic representations defines groups of generic representations that deal with the same kind of design decisions. Successive graphic units defines preconditions for subsequent or previous generic representations. On the basis of themes it is possible to define six general sequences of generic representations. On the basis of additional and successive graphic units it is possible to define sequences of generic representations in themes. On the basis of these sequences, one particular sequence of 23 generic representations is defined.The particular sequence of generic representations structures the decision process of a building type. In order to test this assertion, the particular sequence is applied to the office building type. For each generic representation, it is possible to establish a graphic representation that follows the definition of the graphic units and to apply the required statements from the office building knowledge base. The application results in a sequence of graphic representations that particularises an office building design.Implementation of seven generic representations in a computer aided design system demonstrates the use of generic representations for design support. The set is large enough to provide additional weight to the conclusion that generic representations map declarative and procedural knowledge of the building type.
series	thesis:PhD
email
more	http://alexandria.tue.nl/extra2/9703788.pdf
last changed	2003/11/21 15:15

_id	eea1
authors	Achten, Henri
year	1997
title	Generic Representations - Typical Design without the Use of Types
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 117-133
summary	The building type is a (knowledge) structure that is both recognised as a constitutive cognitive element of human thought and as a constitutive computational element in CAAD systems. Questions that seem unresolved up to now about computational approaches to building types are the relationship between the various instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed functional use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called 'prototypes') face problems clarifying these questions. It is proposed in this research not to focus on a definition of 'type,' but rather to investigate the role of knowledge connected to building types in the design process. The basic proposition is that the graphic representations used to represent the state of the design object throughout the design process can be used as a medium to encode knowledge of the building type. This proposition claims that graphic representations consistently encode the things they represent, that it is possible to derive the knowledge content of graphic representations, and that there is enough diversity within graphic representations to support a design process of a building belonging to a type. In order to substantiate these claims, it is necessary to analyse graphic representations. In the research work, an approach based on the notion of 'graphic units' is developed. The graphic unit is defined and the analysis of graphic representations on the basis of the graphic unit is demonstrated. This analysis brings forward the knowledge content of single graphic representations. Such knowledge content is declarative knowledge. The graphic unit also provides the means to articulate the transition from one graphic representation to another graphic representation. Such transitions encode procedural knowledge. The principles of a sequence of generic representations are discussed and it is demonstrated how a particular type - the office building type - is implemented in the theoretical work. Computational work on implementation part of a sequence of generic representations of the office building type is discussed. The paper ends with a summary and future work.
series	CAAD Futures
email
last changed	2003/11/21 15:15

_id	acadia23_v1_136
id	acadia23_v1_136
authors	Alima, Natalia
year	2023
title	InterspeciesForms
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 136-143.
summary	The hybridization of architectural, biological and robotic agencies Situated in the field of architectural biodesign, InterspeciesForms explores a closer relationship between the fungus Pleurotus ostreatus and the designer in the creation of form. The intention of hybridizing mycelia’s agency of growth with architectural design intention is to generate novel, non-indexical crossbred designed outcomes that evolve preconceived notions of architectural form. Mycelium are threadlike fibrous root systems made up of hyphae, that form the vegetative part of a fungus (Jones 2020). Known as the hackers of the wood wide web (Simard 1997) mycelia form complex symbiotic relationships with other species that inhabit our earth. Michael Lim states “Fungi redefine resourcefulness, collaboration, resilience and symbiosis” (Lim 2022, p. 14). When wandering around the forest to connect with other species or searching for food, fungi form elaborate and entangled networks by spreading their hyphal tips. Shown in Figure 1, this living labyrinth results in the aesthetic formation of an intricate web. Due to the organisms ability to determine the most effective direction of growth, communicate with its surrounding ecosystem, and connect with other species, fungi are indeed an intelligent species with a unique aesthetic that must not be ignored. In drawing on these concepts, I refer to the organism’s ability to search for, tangle, and digest its surroundings as ‘mycelia agency of growth’. It is this specific behavioral characteristic that is the focus of this research, with which I, as the architect, set out to co-create and hybridize with.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	a93b
authors	Anders, Peter
year	1997
title	Cybrids: Integrating Cognitive and Physical Space in Architecture
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 17-34
doi	https://doi.org/10.52842/conf.acadia.1997.017
summary	People regularly use non-physical, cognitive spaces to navigate and think. These spaces are important to architects in the design and planning of physical buildings. Cognitive spaces inform design - often underlying principles of architectural composition. They include zones of privacy, territory and the space of memory and visual thought. They let us to map our environment, model or plan projects, even imagine places like Heaven or Hell. Cyberspace is an electronic extension of this cognitive space. Designers of virtual environments already know the power these spaces have on the imagination. Computers are no longer just tools for projecting buildings. They change the very substance of design. Cyberspace is itself a subject for design. With computers architects can design space both for physical and non-physical media. A conscious integration of cognitive and physical space in architecture can affect construction and maintenance costs, and the impact on natural and urban environments. This paper is about the convergence of physical and electronic space and its potential effects on architecture. The first part of the paper will define cognitive space and its relationship to cyberspace. The second part will relate cyberspace to the production of architecture. Finally, a recent project done at the University of Michigan Graduate School of Architecture will illustrate the integration of physical and cyberspaces.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	d97a
authors	Arkin, H.
year	1997
title	Introduction
source	Automation in Construction 6 (5-6) (1997) pp. 379-380
summary	The term ‚Intelligenz Vuilding‘ is not any longer a mere slogan used by smart salesmen of commercial and / or office buildings. During recent years it has come to describe a broad engineering concept for building design, construcions and operation, the realization of which challenges architects and engineers involved in the various aspects of building industry. The concept empasizes a multidisciplinary effort to integrate and potimize the building strctures, systems , services and management in order to create a productive and responsive environment for teh building occupant, in a cost-effective manner.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	0c91
authors	Asanowicz, Aleksander
year	1997
title	Computer - Tool vs. Medium
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.b2e
summary	We have arrived an important juncture in the history of computing in our profession: This history is long enough to reveal clear trends in the use of computing, but not long to institutionalize them. As computers peremate every area of architecture - from design and construction documents to project administration and site supervision - can “virtual practice” be far behind? In the old days, there were basically two ways of architects working. Under stress. Or under lots more stress. Over time, someone forwarded the radical motion that the job could be easier, you could actually get more work done. Architects still have been looking for ways to produce more work in less time. They need a more productive work environment. The ideal environment would integrate man and machine (computer) in total harmony. As more and more architects and firms invest more and more time, money, and effort into particular ways of using computers, these practices will become resistant to change. Now is the time to decide if computing is developing the way we think it should. Enabled and vastly accelerated by technology, and driven by imperatives for cost efficiency, flexibility, and responsiveness, work in the design sector is changing in every respect. It is stands to reason that architects must change too - on every level - not only by expanding the scope of their design concerns, but by altering design process. Very often we can read, that the recent new technologies, the availability of computers and software, imply that use of CAAD software in design office is growing enormously and computers really have changed the production of contract documents in architectural offices.
keywords	Computers, CAAD, Cyberreal, Design, Interactive, Medium, Sketches, Tools, Virtual Reality
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/asan/asanowic.htm
last changed	2022/06/07 07:50

_id	411c
authors	Ataman, Osman and Bermúdez (Ed.)
year	1999
title	Media and Design Process [Conference Proceedings]
source	ACADIA ‘99 Proceedings / ISBN 1-880250-08-X / Salt Lake City 29-31 October 1999, 353 p.
doi	https://doi.org/10.52842/conf.acadia.1999
summary	Throughout known architectural history, representation, media and design have been recognized to have a close relationship. This relationship is inseparable; representation being a means for engaging in design thinking and making and this activity requiring media. Interpretations as to what exactly this relationship is or means have been subject to debate, disagreement and change along the ages. Whereas much has been said about the interactions between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues (1997), that we have enough context to be able to see and address the relationship between media and human activities with some degree of perspective.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	58f4
authors	Barequet, G. and Kumar, S.
year	1997
title	Repairing CAD models
source	Proceedings of IEEE Visualizationí97, pp. 363-370
summary	We describe an algorithm for repairing polyhedral CAD models that have errors in their B-REP. Errors like cracks, degeneracies, duplication, holes and overlaps are usually introduced in solid models due to imprecise arithmetic, model transformations, designer's fault, programming bugs, etc. Such errors often hamper further processing like finite element analysis, radiosity computation and rapid prototyping. Our fault-repair algorithm converts an unordered collection of polygons to a shared-vertex representation to help eliminate errors. This is done by choosing, for each polygon edge, the most appropriate edge to unify it with. The two edges are then geometrically merged into one, by moving vertices. At the end of this process, each polygon edge is either coincident with another or is a boundary edge for a polygonal hole or a dangling wall and may be appropriately repaired. Finally, in order to allow user- inspection of the automatic corrections, we produce a visualization of the repair and let the user mark the corrections that conflict with the original design intent. A second iteration of the correction algorithm then produces a repair that is commensurate with the intent. Thus, by involving the users in a feedback loop, we are able to refine the correction to their satisfaction.
series	other
email
last changed	2003/04/23 15:14

_id	a726
authors	Belblidia, S. and Perrin, J.P.
year	1997
title	Level-of-Detail Visualization of Architectural Models
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 831-836
summary	The work presented in this paper aims to use level-of-detail representation in realizing interactive walkthroughs or ignoring useless details in large architectural models. In order to choose the right representation of a model, we have to evaluate the error committed when using a simplified version instead of the full description of an object. This error depends on the object deformation during the simplification process but also on the importance of this object in the current viewing conditions. This "visible" error is used with different visualization strategies to find the model representation which satisfies either a quality criterion or a cost condition.
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	4e1c
authors	Berdinski, D.
year	1997
title	Combining different kinds of perspective images in architectural practice.
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	This paper is about combining photo-, video-, endoscope captured images with handmade or computer generated ones. Practically all optical systems are known to produce more or less curved perspective (spherical or cylindrical) which depends of angle-of-view, and a computer as a rule (as handmade) constructs linear perspective images. To combine them on any media correctly, an operator has to be professional painter or designer, because there is no mathematically determined way to combine them. The author's-made demo-computer program is able to generate spherical perspective of simple spatial constructions. It allows to illustrate mathematically and visually the principles of optical curved perspective, laws of their combination with linear ones and helps to feel how to achieve the accordance with natural visual architectural images.
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	76ba
authors	Bermudez, Julio
year	1997
title	Cyber(Inter)Sections: Looking into the Real Impact of The Virtual in the Architectural Profession
source	Proceedings of the Symposium on Architectural Design Education: Intersecting Perspectives, Identities and Approaches. Minneapolis, MN: College of Architecture & Landscape Architecture, pp. 57-63
summary	As both the skepticism and 'hype' surrounding cyberspace vanish under the weight of ever increasing power, demand, and use of information, the architectural discipline must prepare for significant changes. For cyberspace is remorselessly cutting through the dearest structures, rituals, roles, and modes of production in our profession. Yet, this section is not just a detached cut through the existing tissues of the discipline. Rather it is an inter-section, as cyberspace becomes also transformed in the act of piercing. This phenomenon is causing major transformations in at least three areas: 1. Cyberspace is substantially altering the way we produce and communicate architectural information. The arising new working environment suggests highly hybrid and networked conditions that will push the productive and educational landscape of the discipline towards increasing levels of fluidity, exchanges, diversity and change. 2. It has been argued that cyberspace-based human and human-data interactions present us with the opportunity to foster a more free marketplace of ideologies, cultures, preferences, values, and choices. Whether or not the in-progress cyberincisions have the potential to go deep enough to cure the many illnesses afflicting the body of our discipline need to be considered seriously. 3. Cyberspace is a new place or environment wherein new kinds of human activities demand unprecedented types of architectural services. Rather than being a passing fashion, these new architectural requirements are destined to grow exponentially. We need to consider the new modes of practice being created by cyberspace and the education required to prepare for them. This paper looks at these three intersecting territories showing that it is academia and not practice that is leading the profession in the incorporation of virtuality into architecture. Rafael Moneo's words come to mind. [2]
series	other
email
last changed	2003/11/21 15:16

For more results click below: