Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 519

Reformat results as: short short into frame detailed detailed into frame

_id	a5c7
authors	Hovestadt, Ludger and Hovestadt, Volkmar
year	1997
title	ARMILLA5 - Supporting Design, Construction and Management of Complex Buildings
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 135-150
summary	ARMILLA5 is a generic computer aided design system, which supports the cooperative design of complex buildings (such as labs, offices or schools) over multiple levels of abstraction. It follows the metaphor of a virtual building site. The designers and engineers meet at a spatial location on the Internet and prepare the building construction by simulating the building site. This article describes the three essential components of the ARMILLA5-model: the geometric model which describes the spatial and physical aspects of the building site, the semantic model which implements passive building components as objects and active building components as applets or applications, and the planning model, which organizes the work steps of the individual engineers and their cooperation. The model is described using different software prototypes written in Objective C, CAD systems and HTML/JAVA.
keywords	Dynamic Buildings, CAAD, CSCW, VRML, Case-based Reasoning, Facility Management, Augmented Reality
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	1fb3
authors	Akin, O., Cumming, M., Shealey, M. and Tuncer, B.
year	1997
title	An electronic design assistance tool for case-based representation of designs
source	Automation in Construction 6 (4) (1997) pp. 265-274
summary	In precedent based design, solutions to problems are developed by drawing from an understanding of landmark designs. Many of the key design operations in this mode are similar to the functionalities present in case-based reasoning systems: case matching, case adapting, and case representation. It is clear that a rich case-base, encoding all major product types in a design domain would be the centerpiece of such an approach. EDAT (Electronic Design Assistance Tool) is intended to assist in precedent based design in the studio with the potential of expansion into the office setting. EDAT has been designed using object oriented system development methods. EDAT was used in a design studio at Carnegie Mellon University, during Spring 1996.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a9f5
authors	Maher, Mary Lou
year	1997
title	Sam: A Multimedia Case Library of Structural Designs
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 5-13
doi	https://doi.org/10.52842/conf.caadria.1997.005
summary	Recent developments in multimedia and case-based reasoning provide the basis for developing teaching aids for architecture students that present technology and science learning materials as design cases. Case-based reasoning tools can provide assistance in the identification of a relevant design case and the modification of a case for the current design problem. We have developed multimedia library of buildings to support a case-based reasoning approach to teaching structural design. The design cases are linked through a network of concepts that follow a specific learning area, for example, the structural design of tall buildings is linked through the concept of lateral load resistance. The multimedia environment provides an active learning tool that the student uses to generate design solutions.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	83a5
authors	Bock, Thomas
year	1997
title	CAD-So What?
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 15-43
summary	Computers were applied in construction towards the end of the 50s. In the meantime CA-X technologies rapidly evolved in areas such as integration of application software, 3D modelling and simulation, multimedia systems, artificial intelligence, CAD/CAM, robotics, and computer-based integration of design, construction and facility management. The structural changes under way in the construction industry ask for a transition from mere CAD, where "D" stands for design and drafting, towards CAC, where the second "C" represents construction , thus farther processing the previously generated CAD data .
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
doi	https://doi.org/10.52842/conf.acadia.2007.174
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
doi	https://doi.org/10.52842/conf.ecaade.2000.057
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	389b
authors	Do, Ellen Yi-Luen
year	2000
title	Sketch that Scene for Me: Creating Virtual Worlds by Freehand Drawing
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 265-268
doi	https://doi.org/10.52842/conf.ecaade.2000.265
summary	With the Web people can now view virtual threedimensional worlds and explore virtual space. Increasingly, novice users are interested in creating 3D Web sites. Virtual Reality Modeling Language gained ISO status in 1997, although it is being supplanted by the compatible Java3D API and alternative 3D Web technologies compete. Viewing VRML scenes is relatively straightforward on most hardware platforms and browsers, but currently there are only two ways to create 3D virtual scenes: One is to code the scene directly using VRML. The other is to use existing CAD and modeling software, and save the world in VRML format or convert to VRML from some other format. Both methods are time consuming, cumbersome, and have steep learning curves. Pen-based user interfaces, on the other hand, are for many an easy and intuitive method for graphics input. Not only are people familiar with the look and feel of paper and pencil, novice users also find it less intimidating to draw what they want, where they want it instead of using a complicated tool palette and pull-down menus. Architects and designers use sketches as a primary tool to generate design ideas and to explore alternatives, and numerous computer-based interfaces have played on the concept of "sketch". However, we restrict the notion of sketch to freehand drawing, which we believe helps people to think, to envision, and to recognize properties of the objects with which they are working. SKETCH employs a pen interface to create three-dimensional models, but it uses a simple language of gestures to control a three-dimensional modeler; it does not attempt to interpret freehand drawings. In contrast, our support of 3D world creation using freehand drawing depend on users’ traditional understanding of a floor plan representation. Igarashi et al. used a pen interface to drive browsing in a 3D world, by projecting the user’s marks on the ground plane in the virtual world. Our Sketch-3D project extends this approach, investigating an interface that allows direct interpretation of the drawing marks (what you draw is what you get) and serves as a rapid prototyping tool for creating 3D virtual scenes.
keywords	Freehand Sketching, Pen-Based User Interface, Interaction, VRML, Navigation
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	837b
authors	Elger, Dietrich and Russell, Peter
year	2000
title	Using the World Wide Web as a Communication and Presentation Forum for Students of Architecture
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 61-64
doi	https://doi.org/10.52842/conf.ecaade.2000.061
summary	Since 1997, the Institute for Industrial Building Production (ifib) has been carrying out upper level design studios under the framework of the Netzentwurf or Net-Studio. The Netzentwurf is categorized as a virtual design studio in that the environment for presentation, criticism and communication is web based. This allows lessons learned from research into Computer Supported Cooperative Work (CSCW) to be adapted to the special conditions indigenous to the architectural design studio. Indeed, an aim of the Netzentwurf is the creation and evolution of a design studio planing platform. In the Winter semester 1999-2000, ifib again carried out two Netzentwurf studios. involving approximately 30 students from the Faculty of Architecture, University of Karlsruhe. The projects differed from previous net studios in that both studios encompassed an inter-university character in addition to the established framework of the Netzentwurf. The first project, the re-use of Fort Kleber in Wolfisheim by Strasbourg, was carried out as part of the Virtual Upperrhine University of Architecture (VuuA) involving over 140 students from various disciplines in six institutions from five universities in France, Switzerland and Germany. The second project, entitled "Future, Inc.", involved the design of an office building for a scenario 20 years hence. This project was carried out in parallel with the Technical University Cottbus using the same methodology and program for two separate building sites.
keywords	Virtual Design Studios, Architectural Graphics, Presentation Techniques
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	f5ee
authors	Erhorn, H., De Boer, J. and Dirksmueller, M.
year	1997
title	ADELINE, an Integrated Approach to Lighting Simulation
source	Proceedings of Right Light 4, 4th European Conference on Energy-Efficient Lighting, pp.99-103
summary	The use of daylighting and artificial lighting simulation programs to calculate complex systems and models in the design practice often is impeded by the fact that the operation of these programs, especially the model input, is extremely complicated and time-consuming. Programs that are easier to use generally do not show the calculation capabilities required in practice. A second obstacle arises as the lighting calculations often do not allow any statements regarding the interactions with the energetic and thermal building performance. Both problems are mainly due to a lacking integration of the design tools of other building design practitioners as well as due to insufficient user interfaces. The program package ADELINE (Advanced Daylight and Electric Lighting Integrated New Environment) being available since May 1996 as completely revised version 2.0 presents a promising approach to solve these problems. This contribution describes the approaches and methods used within the international project IEA Task 21 for a further development of the ADELINE system. Aim of this work is a further improvement of user interfaces based on the inclusion of new dialogs and on a portation of the program system from MS-DOS to the Windows NT platform. Additional focus is laid on the use of recent developments in the field of information technology and experiences gained in other projects on integrated building design systems, like for example EU-COMBINE, in a pragmatical way. An integrated building design system with open standardized interfaces is to be achieved inter alia by using ISOSTEP formats, database technologies and a consequent, object-oriented design.
series	other
last changed	2003/04/23 15:50

_id	07d8
authors	Garza, J.M. de la and Howitt, I.
year	1998
title	Wireless communication and computing at the construction jobsite
source	Automation in Construction 7 (4) (1998) pp. 327-347
summary	For many years, the walkie-talkie has been synonymous with the construction industry. During jobsite project execution, there are three variables which can either hinder or facilitate successful results, namely, quality, quantity, and timing of information. Wireless data communications technology is capable of delivering just-in-time information within the `last mile' between the trailer and a desired location on the jobsite. This paper reports on a study which surveyed information needs at the jobsite, emerging wireless data communications technology, and assessed the extent to which wireless data technology can fulfill the information needs of the jobsite [J.M. de la Garza, I. Howitt, Wireless communication and computing at the jobsite, Research Report 136-11, Construction Industry Institute, Austin, TX, 1997]. We have organized jobsite information needs into the following ten categories: (a) requests for information, (b) materials management, (c) equipment management, (d) cost management, (e) schedule and means and methods, (f) jobsite record keeping, (g) submittals, (h) safety, (i) QC/QA, and (k) future trends. Each category was analyzed in terms of its appropriateness to take advantage of wireless technology. The four formats considered to transmit information wirelessly were: (a) live voice, (b) live video, (c) batched data, and (d) live data. Current wireless communication technology has been classified into the following five classes: (a) circuit-switched wireless data systems, (b) packet-switched wireless data systems––this class was further subdivided into specialized mobile radio systems and cellular digital packet data systems, (c) wireless local area networks, (d) paging systems, and (e) satellite-based data communications. A primer for wireless communications covering both fundamental and advanced communications concepts has also been included to enable a better understanding of the issues involved in making trade-offs while configuring a wireless jobsite communication system. The example presented in this paper shows how a contractor can define a subset of information needs by choosing from those already articulated herein and determine if a given wireless technology should even be considered as a viable way of meeting the information needs that such company has.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	2c17
authors	Junge, Richard and Liebich, Thomas
year	1997
title	Product Data Model for Interoperability in an Distributed Environment
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 571-589
summary	This paper belongs to a suite of three interrelated papers. The two others are 'The VEGA Platform' and 'A Dynamic Product Model'. These two companion papers are also based on the VEGA project. The ESPRIT project VEGA (Virtual Enterprises using Groupware tools and distributed Architectures) has the objective to develop IT solutions enabling virtual enterprises, especially in the domain of architectural design and building engineering. VEGA shall give answers to many questions of what is needed for enabling such virtual enterprise from the IT side. The questions range from technologies for networks, communication between distributed applications, control, management of information flow to implementation and model architectures to allow distribution of information in the virtual enterprises. This paper is focused on the product model aspect of VEGA. So far modeling experts have followed a more or less centralized architecture (central or central with 4 satellites'). Is this also the architecture for the envisaged goal? What is the architecture for such a distributed model following the paradigm of modeling the , natural human' way of doing business? What is the architecture enabling most effective the filtering and translation in the communication process. Today there is some experience with 'bulk data' of the document exchange type. What is with incremental information (not data) exchange? Incremental on demand only the really needed information not a whole document. The paper is structured into three parts. First there is description of the modeling history or background. the second a vision of interoperability in an distributed environment from the users coming from architectural design and building engineering view point. Third is a description of work undertaken by the authors in previous project forming the direct basis for the VEGA model. Finally a short description of the VEGA project, especially the VEGA model architecture.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	sigradi2014_164
id	sigradi2014_164
authors	Moroni Dotoranda, Janaina Luisa da Silva; Paulo Edi Rivero Martins, Dr.Giuseppe Lotti
year	2014
title	Estilo de herramientas didácticas que favorecen la creatividad. Tema: Nuevas metodologías de aprendizaje
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 245-249
summary	Creativity is an important factor for innovators. According to Eguchi and Pinheiro (2008) the basis of design is innovation because of the use creative methodology. It’s important to remember that the word “project” comes from the Latin “proyectus”, meaning “a forward throwing action”. According to Ramos (2006), “educating for creativity is essential.” Beetlestone (2000), De Bono (1993), Munari (1997) and Pawlak (2000) argue that as we’re children we’re curious to find answers to everything, but that traditional schooling brakes the creativity. This research is a methodological test which aims to identify the reasons for student’s selection of specific creative tools used in university projects.
keywords	Creativity; Innovation; Design; Education; Freedom
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	0de7
authors	Müller, Christian
year	1997
title	An Advanced Groupware Approach for an Integrated Planning Process in Building Construction
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 475-480
summary	Increasing complexity of today's buildings requires a high level of integration in the planning process. Common planning strategies, where individual project partners cooperate mainly to exchange results, are not suitable to jointly develop project goals and objectives. Integrated planning, a more holistic approach to deal with complex problems, is based on a high degree of communication among team members and leads to a goal oriented cooperation. This paper focuses on the application of an advanced groupware approach suitable to support efficiently an integrated design process in construction. First an appropriate planning process model will be presented, which differs from common product model approaches and takes into account the great importance of team- and goal orientation in integrated planning. Then the idea of an open CSCW platform is proposed, which basic structure and containing elements are based on the defined planning model. Appropriate cooperative planning scenarios can then be ad-hoc modeled and configured dynamically on this CSCW platform according to the requirements of the specific project. For the participants of the planning process, the resulting groupware approach represents an integrated computer based working environment. This environment allows a kind of immersion into the project. Finally a prototypical implementation of this approach will be shortly discussed.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	sigradi2006_c012b
id	sigradi2006_c012b
authors	Rodriguez Barros, Diana and Carmena, Sonia
year	2006
title	Estudio Descriptivo de Prácticas Padagógicas Mediadas por Tecnologías Digitales en Facultades de Arquitectura y Diseño asociadas a la buena Enseñanza [Descriptive study of pedagogical practices mediated by digital technologies in school of architecture and design, associated to the good education]
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 191-194
summary	It is presented a descriptive type study link to the documentary investigation. It is considers to understand, interpretate and critically reconstruct the present practices of proyectual education in studio of school of architecture and design of the region in virtual surroundings, tie to good education. It was used the Burbules & Callister (2001) new emergent postecnocratic approach. It is boarded from the perspective of the authors, in its natural scenes, in its all complexity and its implicances. One worked with a quanti-qualitative methodology, where revision techniques, analysis, evaluation and interpretation of documental textual and visual materials from primary sources were integrated. One has been based on the selection of exposed works in Sigradi congresses, since its creation in 1997 to the present, with extended and updated versions of the authors. As conclusions are recognized professors that show expertise and disciplinar control, that develop investigation tasks tie to the education practices, that incorporate technologies valuating limitations and advantages, and that has recognized the multiple implicit effects in the technologically mediated practices.
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	9
authors	Stipech, Alfredo
year	1998
title	Un Nuevo Horizonte Arquitectonico, Productivo e Intelectual (A New Architectural, Productive and Intelectual Horizon)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 76-83
summary	This work presents the pedagogical experience of a Design Workshop that investigated the impact of the digital and analogic means on the architectonic design process This work was based on the research of Dr. Arch. Julio BermÝdez who also directed this workshop in 1997. This class was part of the Training Program organized by the "Centro de Informatica y Diseho" (CID) at the "Universidad Nacional del Litoral" FADU (Facultad de Arquitectura Diseho y Urbanismo) Santa Fe, Argentina and made possible by the ongoing International Program of Academic Exchange between the FADU and the (University of Utah Graduate School of Architecture (IPAE Project NO 4). The experimental studio utilized an architectural problem to study the procedural, technical, interpretative and theoretical issues associated with the relationship of contemporary media and design process. The pedagogical vehicle was a program that expresses in itself the meeting or collision between two cultures competing for dominance at the end of the millennium: the immemorial material culture (corporeal, tectonic) and the new and everyday more influent virtual culture (information, nets, media, simulation). The premise for the design process, communication and criticism was the constant migration between the digital and analog representation systems. Within this theoretical-practical context semantic aspects containing different representation modalities were used such as physical and electronic models along with systematic and sensitive drawings (manuals, pixels and with CAD). Hybrid interfaces took a leading role in the process since they allowed the communication between analog and digital media through the creative and technical interaction between scanner, video and computer. This architectural and media context generated an intense pedagogic environment fostering the development of creativity and a critical attitude while allowing concrete breakthroughs in the teaching process and format design. Our work reflects on these results showing examples of stud-go works and providing a final evaluation of this unique experience in Argentina.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	c14d
authors	Silva, Neander
year	1997
title	Artificial Intelligence and 3D Modelling Exploration: An Integrated Digital Design Studio
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.l5p
summary	This paper describes a CAAD teaching strategy in which some Artificial Intelligence techniques are integrated with 3D modelling exploration. The main objective is to lead the students towards "repertoire" acquisition and creative exploration of design alternatives. This strategy is based on dialogue emulation, graphic precedent libraries, and 3D modelling as a medium of design study. The course syllabus is developed in two parts: a first stage in which the students interact with an intelligent interface that emulates a dialogue. This interface produces advice composed of either precedents or possible new solutions. Textual descriptions of precedents are coupled with graphical illustrations and textual descriptions of possible new solutions are coupled with sets of 3D components. The second and final stage of the course is based on 3D modelling, not simply as a means of presentation, but as a design study medium. The students are then encouraged to get the system’s output from the first stage of the course and explore it graphically. This is done through an environment in which modelling in 3D is straightforward allowing the focus to be placed on design exploration rather than simply on design presentation. The students go back to the first stage for further advice depending on the results achieved in the second stage. This cycle is repeated until the design solution receives a satisfactory assessment.
keywords	Education, Design Process, Interfaces, Neural Networks, 3D Modelling
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/silva/silva.htm
last changed	2022/06/07 07:50

_id	cabb
authors	Broughton, T., Tan, A. and Coates, P.S.
year	1997
title	The Use of Genetic Programming In Exploring 3D Design Worlds - A Report of Two Projects by Msc Students at CECA UEL
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 885-915
summary	Genetic algorithms are used to evolve rule systems for a generative process, in one case a shape grammar,which uses the "Dawkins Biomorph" paradigm of user driven choices to perform artificial selection, in the other a CA/Lindenmeyer system using the Hausdorff dimension of the resultant configuration to drive natural selection. (1) Using Genetic Programming in an interactive 3D shape grammar. A report of a generative system combining genetic programming (GP) and 3D shape grammars. The reasoning that backs up the basis for this work depends on the interpretation of design as search In this system, a 3D form is a computer program made up of functions (transformations) & terminals (building blocks). Each program evaluates into a structure. Hence, in this instance a program is synonymous with form. Building blocks of form are platonic solids (box, cylinder, etc.). A Variety of combinations of the simple affine transformations of translation, scaling, rotation together with Boolean operations of union, subtraction and intersection performed on the building blocks generate different configurations of 3D forms. Using to the methodology of genetic programming, an initial population of such programs are randomly generated,subjected to a test for fitness (the eyeball test). Individual programs that have passed the test are selected to be parents for reproducing the next generation of programs via the process of recombination. (2) Using a GA to evolve rule sets to achieve a goal configuration. The aim of these experiments was to build a framework in which a structure's form could be defined by a set of instructions encoded into its genetic make-up. This was achieved by combining a generative rule system commonly used to model biological growth with a genetic algorithm simulating the evolutionary process of selection to evolve an adaptive rule system capable of replicating any preselected 3D shape. The generative modelling technique used is a string rewriting Lindenmayer system the genes of the emergent structures are the production rules of the L-system, and the spatial representation of the structures uses the geometry of iso-spatial dense-packed spheres
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	a96b
authors	Cao, Quinsan and Protzen, Jean-Pierre
year	1997
title	Managing Information with Fuzzy Reasoning System in Design Reasoning and Issue-Based Argumentation
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 771-786
summary	Design by argumentation is a natural character of design process with social participation. Issue-Based Information System (IBIS) is an information representation system based on a structured database. It provides a hierarchically linked database structure to manage design information and facilitate design by argumentation. In this paper, we explore the enhancement of IBIS with FRS (Fuzzy Reasoning System) technology. The FRS adds computationally implemented dynamic links to the database of IBIS. Such dynamic links can represent logic relations and reasoning operations among related issues which allows further clarification of relations among issues in IBS. The enhanced system provides a general framework to manage design information and to assist design reasoning, which in turn will contribute to machine assisted design. The final goal is to formulate a system that can represent design knowledge and assist reasoning in design analysis. The system can help designers in clarifying and understanding design related issues, requirements and evaluating potential design alternatives. To demonstrate the system and its potential use, we reexamine a design experiment presented by Schon and represent the design knowledge and reasoning rules of the architects with our system, FRS-IBIS.
series	CAAD Futures
last changed	1999/04/06 09:19

For more results click below: