Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 521

Reformat results as: short short into frame detailed detailed into frame

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	2354
authors	Clayden, A. and Szalapaj, P.
year	1997
title	Architecture in Landscape: Integrated CAD Environments for Contextually Situated Design
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.q6p
summary	This paper explores the future role of a more holistic and integrated approach to the design of architecture in landscape. Many of the design exploration and presentation techniques presently used by particular design professions do not lend themselves to an inherently collaborative design strategy. Within contemporary digital environments, there are increasing opportunities to explore and evaluate design proposals which integrate both architectural and landscape aspects. The production of integrated design solutions exploring buildings and their surrounding context is now possible through the design development of shared 3-D and 4-D virtual environments, in which buildings no longer float in space. The scope of landscape design has expanded through the application of techniques such as GIS allowing interpretations that include social, economic and environmental dimensions. In architecture, for example, object-oriented CAD environments now make it feasible to integrate conventional modelling techniques with analytical evaluations such as energy calculations and lighting simulations. These were all ambitions of architects and landscape designers in the 70s when computer power restricted the successful implementation of these ideas. Instead, the commercial trend at that time moved towards isolated specialist design tools in particular areas. Prior to recent innovations in computing, the closely related disciplines of architecture and landscape have been separated through the unnecessary development, in our view, of their own symbolic representations, and the subsequent computer applications. This has led to an unnatural separation between what were once closely related disciplines. Significant increases in the performance of computers are now making it possible to move on from symbolic representations towards more contextual and meaningful representations. For example, the application of realistic materials textures to CAD-generated building models can then be linked to energy calculations using the chosen materials. It is now possible for a tree to look like a tree, to have leaves and even to be botanicaly identifiable. The building and landscape can be rendered from a common database of digital samples taken from the real world. The complete model may be viewed in a more meaningful way either through stills or animation, or better still, through a total simulation of the lifecycle of the design proposal. The model may also be used to explore environmental/energy considerations and changes in the balance between the building and its context most immediately through the growth simulation of vegetation but also as part of a larger planning model. The Internet has a key role to play in facilitating this emerging collaborative design process. Design professionals are now able via the net to work on a shared model and to explore and test designs through the development of VRML, JAVA, whiteboarding and video conferencing. The end product may potentially be something that can be more easily viewed by the client/user. The ideas presented in this paper form the basis for the development of a dual course in landscape and architecture. This will create new teaching opportunities for exploring the design of buildings and sites through the shared development of a common computer model.
keywords	Integrated Design Process, Landscape and Architecture, Shared Environmentsenvironments
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/szalapaj/szalapaj.htm
last changed	2022/06/07 07:50

_id	389b
authors	Do, Ellen Yi-Luen
year	2000
title	Sketch that Scene for Me: Creating Virtual Worlds by Freehand Drawing
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 265-268
doi	https://doi.org/10.52842/conf.ecaade.2000.265
summary	With the Web people can now view virtual threedimensional worlds and explore virtual space. Increasingly, novice users are interested in creating 3D Web sites. Virtual Reality Modeling Language gained ISO status in 1997, although it is being supplanted by the compatible Java3D API and alternative 3D Web technologies compete. Viewing VRML scenes is relatively straightforward on most hardware platforms and browsers, but currently there are only two ways to create 3D virtual scenes: One is to code the scene directly using VRML. The other is to use existing CAD and modeling software, and save the world in VRML format or convert to VRML from some other format. Both methods are time consuming, cumbersome, and have steep learning curves. Pen-based user interfaces, on the other hand, are for many an easy and intuitive method for graphics input. Not only are people familiar with the look and feel of paper and pencil, novice users also find it less intimidating to draw what they want, where they want it instead of using a complicated tool palette and pull-down menus. Architects and designers use sketches as a primary tool to generate design ideas and to explore alternatives, and numerous computer-based interfaces have played on the concept of "sketch". However, we restrict the notion of sketch to freehand drawing, which we believe helps people to think, to envision, and to recognize properties of the objects with which they are working. SKETCH employs a pen interface to create three-dimensional models, but it uses a simple language of gestures to control a three-dimensional modeler; it does not attempt to interpret freehand drawings. In contrast, our support of 3D world creation using freehand drawing depend on users’ traditional understanding of a floor plan representation. Igarashi et al. used a pen interface to drive browsing in a 3D world, by projecting the user’s marks on the ground plane in the virtual world. Our Sketch-3D project extends this approach, investigating an interface that allows direct interpretation of the drawing marks (what you draw is what you get) and serves as a rapid prototyping tool for creating 3D virtual scenes.
keywords	Freehand Sketching, Pen-Based User Interface, Interaction, VRML, Navigation
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	40d7
authors	Dalyrmple, Michael and Gerzso, Michael
year	1998
title	Executable Drawings: The Computation of Digital Architecture
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 172-187
doi	https://doi.org/10.52842/conf.acadia.1998.172
summary	Architectural designs are principally represented by drawings. Usually, each drawing corresponds to one design or aspects of one design. On the other hand, one executable drawing corresponds to a set of designs. These drawings are the same as conventional drawings except that they have computer code or programs embedded in them. A specific design is the result of the computer executing the code in a drawing for a particular set of parameter values. If the parameters are changed, a new design or design variation is produced. With executable drawings, a CAD system is also a program editor. A designer not only designs by drawing but also programming. It fuses two activities: the first, drawing, is basic in architectural practice; and the second, progamming, or specifying the relation of outputs from inputs, is basic in computer system development. A consequence of executable drawings is that architectural form is represented by graphical entities (lines or shapes) as well as computer code or programs. This type of architecture we call digital architecture. Two simple examples are presented: first, the design of a building in terms of an executable drawing of the architects, Sangallo the Younger and Michelangelo, and second, a description of an object oriented implementation of a preliminary prototype of an executable drawing system written in 1997 which computes a simple office layout.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	diss_marsh
id	diss_marsh
authors	Marsh, A.J.
year	1997
title	Performance Analysis and Conceptual Design
source	School of Architecture and Fine Arts, University of Western Australia
summary	A significant amount of the research referred to by Manning has been directed into the development of computer software for building simulation and performance analysis. A wide range of computational tools are now available and see relatively widespread use in both research and commercial applications. The focus of development in this area has long been on the accurate simulation of fundamental physical processes, such as the mechanisms of heat flow though materials, turbulent air movement and the inter-reflection of light. The adequate description of boundary conditions for such calculations usually requires a very detailed mathematical model. This has tended to produce tools with a very engineering-oriented and solution-based approach. Whilst becoming increasingly popular amongst building services engineers, there has been a relatively slow response to this technology amongst architects. There are some areas of the world, particularly the UK and Germany, where the use of such tools on larger projects is routine. However, this is almost exclusively during the latter stages of a project and usually for purposes of plant sizing or final design validation. The original conceptual work, building form and the selection of materials being the result of an aesthetic and intuitive process, sometimes based solely on precedent. There is no argument that an experienced designer is capable of producing an excellent design in this way. However, not all building designers are experienced, and even fewer have a complete understanding of the fundamental physical processes involved in building performance. These processes can be complex and often highly inter-related, often even counter-intuitive. It is the central argument of this thesis that the needs of the building designer are quite different from the needs of the building services engineer, and that existing building design and performance analysis tools poorly serve these needs. It will be argued that the extensive quantitative input requirement in such tools acts to produce a psychological separation between the act of design and the act of analysis. At the conceptual stage, building geometry is fluid and subject to constant change, with solid quantitative information relatively scarce. Having to measure off surface areas or search out the emissivity of a particular material forces the designer to think mathematically at a time when they are thinking intuitively. It is, however, at this intuitive stage that the greatest potential exists for performance efficiencies and environmental economies. The right orientation and fenestration choice can halve the airconditioning requirement. Incorporating passive solar elements and natural ventilation pathways can eliminate it altogether. The building form can even be designed to provide shading using its own fabric, without any need for additional structure or applied shading. It is significantly more difficult and costly to retrofit these features at a later stage in a project’s development. If the role of the design tool is to serve the design process, then a new approach is required to accommodate the conceptual phase. This thesis presents a number of ideas on what that approach may be, accompanied by some example software that demonstrates their implementation.
series	thesis:PhD
more	http://www.squ1.com/site.html
last changed	2003/11/28 07:33

_id	ab09
authors	Qaqish, Ra’ed and Hanna, Raid
year	1997
title	The Impact of CAL Strategies on CAD
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 475-489
doi	https://doi.org/10.52842/conf.caadria.1997.475
summary	This paper reports on a two fold study, which examines the impact of CAL on CAD and architectural education, and evaluates the overall effectiveness and efficiency of CAD teaching and strategies in the curriculum of architecture. The study also examined the need for a framework within which the creation of a module for applying CAL in CAD to support the curriculum of architecture can be structured and assessed. The main concern of the study was to explore the range and balance of computer assisted activities in the design studio, and the interpretation of the various roles of the CAD tutor and his/her involvement in delivering these activities. In delivering these activities two criteria, namely: teaching methods and CAD integration (which are interchangeable and yet play different roles), can have a distinct effect on the implementation of CAL in the design studio. The case study evaluated and investigated the CAL the AEC course as part of the 3rd year design studio at Mackintosh School of Architecture, to determine to what extent the AEC learning events were effective in advocating new strategies in CAD. The methods of this investigation consisted of classroom observations and administrating questionnaires. Variables such as the group and gender differences/participation, the tutor’s confidence, level of administration and strategies to help with technical problems and motivations, also the task-related activities, tangibility of the learning materials, and the minutes of lesson have been examined. The global rating of the CAL events in CAD lessons, the CAL organisation and sequence, the level of students’ confidence, the rate of students’ interest, the mode of classroom, the level of learner performance and the relationship between CAL and the overall curriculum have also been empirically examined and their interdependent relationships explored. The findings of this study may help in establishing future directions in adopting some form of effective CAL strategies in CAD. The study also serves as an evaluation tool for computing teaching in the design studio. Furthermore, the checklist used in this case study may also be used in evaluating the different courses in CAD in the curriculum of architectural schools.
series	CAADRIA
last changed	2022/06/07 08:00

_id	536e
authors	Bouman, Ole
year	1997
title	RealSpace in QuickTimes: architecture and digitization
source	Rotterdam: Nai Publishers
summary	Time and space, drastically compressed by the computer, have become interchangeable. Time is compressed in that once everything has been reduced to 'bits' of information, it becomes simultaneously accessible. Space is compressed in that once everything has been reduced to 'bits' of information, it can be conveyed from A to B with the speed of light. As a result of digitization, everything is in the here and now. Before very long, the whole world will be on disk. Salvation is but a modem away. The digitization process is often seen in terms of (information) technology. That is to say, one hears a lot of talk about the digital media, about computer hardware, about the modem, mobile phone, dictaphone, remote control, buzzer, data glove and the cable or satellite links in between. Besides, our heads are spinning from the progress made in the field of software, in which multimedia applications, with their integration of text, image and sound, especially attract our attention. But digitization is not just a question of technology, it also involves a cultural reorganization. The question is not just what the cultural implications of digitization will be, but also why our culture should give rise to digitization in the first place. Culture is not simply a function of technology; the reverse is surely also true. Anyone who thinks about cultural implications, is interested in the effects of the computer. And indeed, those effects are overwhelming, providing enough material for endless speculation. The digital paradigm will entail a new image of humankind and a further dilution of the notion of social perfectibility; it will create new notions of time and space, a new concept of cause and effect and of hierarchy, a different sort of public sphere, a new view of matter, and so on. In the process it will indubitably alter our environment. Offices, shopping centres, dockyards, schools, hospitals, prisons, cultural institutions, even the private domain of the home: all the familiar design types will be up for review. Fascinated, we watch how the new wave accelerates the process of social change. The most popular sport nowadays is 'surfing' - because everyone is keen to display their grasp of dirty realism. But there is another way of looking at it: under what sort of circumstances is the process of digitization actually taking place? What conditions do we provide that enable technology to exert the influence it does? This is a perspective that leaves room for individual and collective responsibility. Technology is not some inevitable process sweeping history along in a dynamics of its own. Rather, it is the result of choices we ourselves make and these choices can be debated in a way that is rarely done at present: digitization thanks to or in spite of human culture, that is the question. In addition to the distinction between culture as the cause or the effect of digitization, there are a number of other distinctions that are accentuated by the computer. The best known and most widely reported is the generation gap. It is certainly stretching things a bit to write off everybody over the age of 35, as sometimes happens, but there is no getting around the fact that for a large group of people digitization simply does not exist. Anyone who has been in the bit business for a few years can't help noticing that mum and dad are living in a different place altogether. (But they, at least, still have a sense of place!) In addition to this, it is gradually becoming clear that the age-old distinction between market and individual interests are still relevant in the digital era. On the one hand, the advance of cybernetics is determined by the laws of the marketplace which this capital-intensive industry must satisfy. Increased efficiency, labour productivity and cost-effectiveness play a leading role. The consumer market is chiefly interested in what is 'marketable': info- and edutainment. On the other hand, an increasing number of people are not prepared to wait for what the market has to offer them. They set to work on their own, appropriate networks and software programs, create their own domains in cyberspace, domains that are free from the principle whereby the computer simply reproduces the old world, only faster and better. Here it is possible to create a different world, one that has never existed before. One, in which the Other finds a place. The computer works out a new paradigm for these creative spirits. In all these distinctions, architecture plays a key role. Owing to its many-sidedness, it excludes nothing and no one in advance. It is faced with the prospect of historic changes yet it has also created the preconditions for a digital culture. It is geared to the future, but has had plenty of experience with eternity. Owing to its status as the most expensive of arts, it is bound hand and foot to the laws of the marketplace. Yet it retains its capacity to provide scope for creativity and innovation, a margin of action that is free from standardization and regulation. The aim of RealSpace in QuickTimes is to show that the discipline of designing buildings, cities and landscapes is not only a exemplary illustration of the digital era but that it also provides scope for both collective and individual activity. It is not just architecture's charter that has been changed by the computer, but also its mandate. RealSpace in QuickTimes consists of an exhibition and an essay.
series	other
email
last changed	2003/04/23 15:14

_id	cbe5
authors	Burry, Mark
year	1997
title	The Cost and Value of Animation for Architectural Designers
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 135-144
summary	As computers laboratories or studios in architecture schools provide greater access to fast machines and sophisticated software, the opportunity for computer aided animation increases I dimension. Previously the domain of the most enthusiastic, it has now become a relatively simple task to move from 3D to 4D. If the impediments to a common access to these new possibilities (for architects) are no longer a matter of the cost and availability of hardware and media, what measures the extent to which we can value the contribution of animation to studio-based design? This paper reports on our progress in establishing some practical and theoretical benchmarks comparing the cost with the value of computer aided (or mediated) animation.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	c4a6
authors	Haapasalo, Harri
year	1997
title	The Role of CAD In Creative Architectural Sketching
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o2b
summary	The history of computers in architectural design is very short; only a few decades; when compared to the development of methods in practical design (Gero 1983). However, the development of the user interfaces has been very fast. According to the practical observations of over one hundred architects, user interfaces are at present inflexible in sketching, although computers can make drafts and the creation of alternatives quicker and more effective in the final stages of designing (Haapasalo 1997). Based on our research in the field of practical design we would wish to stimulate a wider debate about the theory of design. More profound perusal compels us to examine human modes, pre-eminently different levels of thinking and manners of inference. What is the meaning of subconscious and conscious thinking in design? What is the role of intuition in practical design? Do the computer aided design programs apply to creative architectural sketching? To answer such questions, distinct, profound and broad understanding from different disciplines is required. Even then, in spite of such specialist knowledge we cannot hope to unambiguously and definitively answer such questions.
keywords	Creativity, Design Process, Architectural Design, Sketching, Computer Aided Design
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/haapas/haapas.htm
last changed	2022/06/07 07:50

_id	75a8
authors	Achten, Henri H.
year	1997
title	Generic representations : an approach for modelling procedural and declarative knowledge of building types in architectural design
source	Eindhoven University of Technology
summary	The building type is a knowledge structure that is recognised as an important element in the architectural design process. For an architect, the type provides information about norms, layout, appearance, etc. of the kind of building that is being designed. Questions that seem unresolved about (computational) approaches to building types are the relationship between the many kinds of instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called ‘prototypes’) face problems clarifying these questions. The research work at hand proposes to investigate the role of knowledge associated with building types in the design process.Knowledge of the building type must be represented during the design process. Therefore, it is necessary to find a representation which supports design decisions, supports the changes and transformations of the design during the design process, encompasses knowledge of the design task, and which relates to the way architects design. It is proposed in the research work that graphic representations can be used as a medium to encode knowledge of the building type. This is possible if they consistently encode the things they represent; if their knowledge content can be derived, and if they are versatile enough to support a design process of a building belonging to a type.A graphic representation consists of graphic entities such as vertices, lines, planes, shapes, symbols, etc. Establishing a graphic representation implies making design decisions with respect to these entities. Therefore it is necessary to identify the elements of the graphic representation that play a role in decision making. An approach based on the concept of ‘graphic units’ is developed. A graphic unit is a particular set of graphic entities that has some constant meaning. Examples are: zone, circulation scheme, axial system, and contour. Each graphic unit implies a particular kind of design decision (e.g. functional areas, system of circulation, spatial organisation, and layout of the building). By differentiating between appearance and meaning, it is possible to define the graphic unit relatively shape-independent.If a number of graphic representations have the same graphic units, they deal with the same kind of design decisions. Graphic representations that have such a specifically defined knowledge content are called ‘generic representations.’ An analysis of over 220 graphic representations in the literature on architecture results in 24 graphic units and 50 generic representations. For each generic representation the design decisions are identified. These decisions are informed by the nature of the design task at hand. If the design task is a building belonging to a building type, then knowledge of the building type is required. In a single generic representation knowledge of norms, rules, and principles associated with the building type are used. Therefore, a single generic representation encodes declarative knowledge of the building type. A sequence of generic representations encodes a series of design decisions which are informed by the design task. If the design task is a building type, then procedural knowledge of the building type is used.By means of the graphic unit and generic representation, it is possible to identify a number of relations that determine sequences of generic representations. These relations are: additional graphic units, themes of generic representations, and successive graphic units. Additional graphic units defines subsequent generic representations by adding a new graphic unit. Themes of generic representations defines groups of generic representations that deal with the same kind of design decisions. Successive graphic units defines preconditions for subsequent or previous generic representations. On the basis of themes it is possible to define six general sequences of generic representations. On the basis of additional and successive graphic units it is possible to define sequences of generic representations in themes. On the basis of these sequences, one particular sequence of 23 generic representations is defined.The particular sequence of generic representations structures the decision process of a building type. In order to test this assertion, the particular sequence is applied to the office building type. For each generic representation, it is possible to establish a graphic representation that follows the definition of the graphic units and to apply the required statements from the office building knowledge base. The application results in a sequence of graphic representations that particularises an office building design.Implementation of seven generic representations in a computer aided design system demonstrates the use of generic representations for design support. The set is large enough to provide additional weight to the conclusion that generic representations map declarative and procedural knowledge of the building type.
series	thesis:PhD
email
more	http://alexandria.tue.nl/extra2/9703788.pdf
last changed	2003/11/21 15:15

_id	acadia07_040
id	acadia07_040
authors	Hyde, Rory
year	2007
title	Punching Above Your Weight: Digital Design Methods and Organisational Change in Small Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 40-47
doi	https://doi.org/10.52842/conf.acadia.2007.040
summary	Expanding bodies of knowledge imply expanding teams to manage this knowledge. Paradoxically, it can be shown that in situations of complexity—which increasingly characterise the production of architecture generally—the small practice or small team could be at an advantage. This is due to the increasingly digital nature of the work undertaken and artefacts produced by practices, enabling production processes to be augmented with digital toolsets and for tight project delivery networks to be forged with other collaborators and consultants (Frazer 2006). Furthermore, as Christensen argues, being small may also be desirable, as innovations are less likely to be developed by large, established companies (Christensen 1997). By working smarter, and managing the complexity of design and construction, not only can the small practice “punch above its weight” and compete with larger practices, this research suggests it is a more appropriate model for practice in the digital age. This paper demonstrates this through the implementation of emerging technologies and strategies including generative and parametric design, digital fabrication, and digital construction. These strategies have been employed on a number of built and un-built case-study projects in a unique collaboration between RMIT University’s SIAL lab and the award-winning design practice BKK Architects.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	0a35
authors	Junge, R., Steinmann, R. and Beetz, K.
year	1997
title	A Dynamic Product Model - A base for Distributed Applications
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 617-634
summary	The project work described in this paper is a part of the ESPRIT VEGA Project. It is related to two companion papers issued in this conference proceedings. 'Product Data Model for Interoperability in an Distributed Environment' and 'The VEGA Platform' are describing the technological basis for an application modeled to capture and convert the working environment of architects and building engineers, in short: the building design team, to an computer environment. The ESPRIT projects are increasingly forced into 'public and private risk funding and sharing policy. This part of VEGA is explicitly directed to exploitation of the EU funded project. This can be reached by a stepwise (small steps) transition from research to commercial implementation.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	diss_ruhl
id	diss_ruhl
authors	Ruhl, Volker R.
year	1997
title	Computer-Aided Design and Manufacturing of Complex Shaped Concrete Formwork
source	Doctor of Design Thesis, Graduate School of Design, Harvard University, Cambridge, MA
summary	The research presented in this thesis challenges the appropriateness of existing, conventional forming practices in the building construction industry--both in situ or in prefabrication--for building concrete "freeforms," as they are characterized by impracticality and limitations in achieved geometric/formal quality. The author's theory proposes the application of alternative, non-traditional construction methods derived from the integration of information technology, in the form of Computer-Aided Design (CAD), Engineering (CAE) and Manufacturing (CAM), into the concrete tooling and placing process. This concept relies on a descriptive shape model of a physically non-existent building element which serves as a central database containing all the geometric data necessary to completely and accurately inform design development activities as well as the construction process. For this purpose, the thesis orients itself on existing, functioning models in manufacturing engineering and explores the broad spectrum of computer-aided manufacturing techniques applied in this industry. A two-phase, combined method study is applied to support the theory. Part I introduces the phenomenon of "complexity" in the architectural field, defines the goal of the thesis research and gives examples of complex shape. It also presents the two analyzed technologies: concrete tooling and automation technology. For both, it establishes terminology, classifications, gives insight into the state-of-the-art, and describes limitations. For concrete tooling it develops a set of quality criteria. Part II develops a theory in the form of a series of proposed "non-traditional" forming processes and concepts that are derived through a synthesis of state-of-the-art automation with current concrete forming and placing techniques, and describes them in varying depth, in both text and graphics, on the basis of their geometric versatility and their appropriateness for the proposed task. Emphasis is given to the newly emerging and most promising Solid Freeform Fabrication processes, and within this area, to laser-curing technology. The feasibility of using computer-aided formwork design, and computer-aided formwork fabrication in today's standard building practices is evaluated for this particular technology on the basis of case-studies. Performance in the categories of process, material, product, lead time and economy is analyzed over the complete tooling cycle and is compared to the performance of existing, conventional forming systems for steel, wood, plywood veneer and glassfiber reinforced plastic; value s added to the construction process and/or to the formwork product through information technology are pointed out and become part of the evaluation. For this purpose, an analytical framework was developed for testing the performance of various Solid Freeform Fabrication processes as well as the "sensitivity," or the impact of various influencing processes and/or product parameters on lead time and economy. This tool allows us to make various suggestions for optimization as well as to formulate recommendations and guidelines for the implementation of this technology. The primary objective of this research is to offer architects and engineers unprecedented independence from planar, orthogonal building geometry, in the realization of design ideas and/or design requirements for concrete structures and/or their components. The interplay between process-oriented design and innovative implementation technology may ultimately lead to an architecture conceived on a different level of complexity, with an extended form-vocabulary and of high quality.
series	thesis:PhD
last changed	2005/09/09 12:58

_id	841a
authors	Bartnicka, Malgorzata
year	1997
title	The Animal, Full Blood maybe, but Untamed
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 103-108
summary	So far yet, even the most advanced technology has not been able to substitute a human, his thoughts, feelings, dreams, longings, visions. It can though, removing need for all kind of effort from our everyday life, surrounding a human with unprecedented comfort, create feeling of peace and security. Task of a computer is to provide assistance, helping in calculations, forming of refined solids, It contains a compendium of knowledge and memory - but not creative skills. So far it's only a machine, with help of which a possibility of creative expression is expanded. It only can solve problems for a human faster and more efficient way, does not have the ability to describe (formulate) problems. Even while providing a support, does it do that honestly? It means, does it support us in those of our doings where we truly need it? Computers have enormous possibilities of use that are not exploited sufficiently and all the time new generations of yet quicker machines with unbelievable power are being created. Every new type of computer appears to be obsolete and insufficient within a few months. Insufficient for what?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	b4c4
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2000
title	A framework for an Architectural Collaborative Design
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 57-60
doi	https://doi.org/10.52842/conf.ecaade.2000.057
summary	The building industry involves a larger number of disciplines, operators and professionals than other industrial processes. Its peculiarity is that the products (building objects) have a number of parts (building elements) that does not differ much from the number of classes into which building objects can be conceptually subdivided. Another important characteristic is that the building industry produces unique products (de Vries and van Zutphen, 1992). This is not an isolated situation but indeed one that is spreading also in other industrial fields. For example, production niches have proved successful in the automotive and computer industries (Carrara, Fioravanti, & Novembri, 1989). Building design is a complex multi-disciplinary process, which demands a high degree of co-ordination and co-operation among separate teams, each having its own specific knowledge and its own set of specific design tools. Establishing an environment for design tool integration is a prerequisite for network-based distributed work. It was attempted to solve the problem of efficient, user-friendly, and fast information exchange among operators by treating it simply as an exchange of data. But the failure of IGES, CGM, PHIGS confirms that data have different meanings and importance in different contexts. The STandard for Exchange of Product data, ISO 10303 Part 106 BCCM, relating to AEC field (Wix, 1997), seems to be too complex to be applied to professional studios. Moreover its structure is too deep and the conceptual classifications based on it do not allow multi-inheritance (Ekholm, 1996). From now on we shall adopt the BCCM semantic that defines the actor as "a functional participant in building construction"; and we shall define designer as "every member of the class formed by designers" (architects, engineers, town-planners, construction managers, etc.).
keywords	Architectural Design Process, Collaborative Design, Knowledge Engineering, Dynamic Object Oriented Programming
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	d60a
authors	Casti, J.C.
year	1997
title	Would be Worlds: How simulation is changing the frontiers of science
source	John Wiley & Sons, Inc., New York.
summary	Five Golden Rules is caviar for the inquiring reader. Anyone who enjoyed solving math problems in high school will be able to follow the author's explanations, even if high school was a long time ago. There is joy here in watching the unfolding of these intricate and beautiful techniques. Casti's gift is to be able to let the nonmathematical reader share in his understanding of the beauty of a good theory.-Christian Science Monitor "[Five Golden Rules] ranges into exotic fields such as game theory (which played a role in the Cuban Missile Crisis) and topology (which explains how to turn a doughnut into a coffee cup, or vice versa). If you'd like to have fun while giving your brain a first-class workout, then check this book out."-San Francisco Examiner "Unlike many popularizations, [this book] is more than a tour d'horizon: it has the power to change the way you think. Merely knowing about the existence of some of these golden rules may spark new, interesting-maybe even revolutionary-ideas in your mind. And what more could you ask from a book?"-New Scientist "This book has meat! It is solid fare, food for thought . . . makes math less forbidding, and much more interesting."-Ben Bova, The Hartford Courant "This book turns math into beauty."-Colorado Daily "John Casti is one of the great science writers of the 1990s."-San Francisco Examiner In the ever-changing world of science, new instruments often lead to momentous discoveries that dramatically transform our understanding. Today, with the aid of a bold new instrument, scientists are embarking on a scientific revolution as profound as that inspired by Galileo's telescope. Out of the bits and bytes of computer memory, researchers are fashioning silicon surrogates of the real world-elaborate "artificial worlds"-that allow them to perform experiments that are too impractical, too costly, or, in some cases, too dangerous to do "in the flesh." From simulated tests of new drugs to models of the birth of planetary systems and galaxies to computerized petri dishes growing digital life forms, these laboratories of the future are the essential tools of a controversial new scientific method. This new method is founded not on direct observation and experiment but on the mapping of the universe from real space into cyberspace. There is a whole new science happening here-the science of simulation. The most exciting territory being mapped by artificial worlds is the exotic new frontier of "complex, adaptive systems." These systems involve living "agents" that continuously change their behavior in ways that make prediction and measurement by the old rules of science impossible-from environmental ecosystems to the system of a marketplace economy. Their exploration represents the horizon for discovery in the twenty-first century, and simulated worlds are charting the course. In Would-Be Worlds, acclaimed author John Casti takes readers on a fascinating excursion through a number of remarkable silicon microworlds and shows us how they are being used to formulate important new theories and to solve a host of practical problems. We visit Tierra, a "computerized terrarium" in which artificial life forms known as biomorphs grow and mutate, revealing new insights into natural selection and evolution. We play a game of Balance of Power, a simulation of the complex forces shaping geopolitics. And we take a drive through TRANSIMS, a model of the city of Albuquerque, New Mexico, to discover the root causes of events like traffic jams and accidents. Along the way, Casti probes the answers to a host of profound questions these "would-be worlds" raise about the new science of simulation. If we can create worlds inside our computers at will, how real can we say they are? Will they unlock the most intractable secrets of our universe? Or will they reveal instead only the laws of an alternate reality? How "real" do these models need to be? And how real can they be? The answers to these questions are likely to change the face of scientific research forever.
series	other
last changed	2003/04/23 15:14

_id	47fc
authors	Costanzo, E., De Vecchi, A., Di Miceli, C. and Giacchino, V.
year	1997
title	A Software for Automatically Verifying Compatibility in Complicated Building Assemblies
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.q4q
summary	The research we are carrying on is intended to develop a tool aiding to design building mechanical assembly systems, which are often characterised by high complexity levels. In fact, when designing complicated building assemblies by making use of common graphical representations, it might be impossible for the operator to choose the proper shape and installation sequence of components so that they do not interfere during the assembly, and to check, in the meantime, the most favorable setting up modalities according to execution problems. Our software, running within CAD, by starting from the definition of the node features, will allow the operator to automatically get three types of representation that can simulate the assembly according to the assigned installation sequence: - instant images of the phases for setting up each component into the node; - 3D views showing the position of each component disassembled from the node and indicating the movements required for connection; - the components moving while the node is being constructed. All the representations can be updated step by step each time modifications to the node are made. Through this digital iterative design process - that takes advantage of various simultaneous and realistic prefigurations - the shape and function compatibility between the elements during the assembling can be verified. Furthermore, the software can quickly check whether any change and integration to the node is efficacious, rising the approximation levels in the design phase. At the moment we have developed the part of the tool that simulates the assembly by moving the components into the nodes according to the installation sequence.
series	eCAADe
more	http://info.tuwien.ac.at/ecaade/proc/costanzo/costanzo.htm
last changed	2022/06/07 07:50

_id	598d
authors	Davies, P.
year	1997
title	Case study - Multiprofessional
source	Automation in Construction 6 (1) (1997) pp. 51-57
summary	IT is just a tool, but the most powerful one ever to be offered to us. This case study deals with the areas at which IT can be targeted within the Building Design Partnership. Firstly, should anything be done and if so, what criteria should be used to choose the priorities?A SWOT analysis is one way way to identify goals. Strengths/weeknesses, opportunities/threats are the positive/negative pairs. We have to build our strength and perceive and take opportunities while at the same time countering weaknesses and threats.It is a threat that the industry sets a moving target of IT capability without wanting to meet its cost. It is an opportunity that only a few practices will be at the leading edge and that they will secure the key projects. IT could help us to overcome technical weaknesses and liability and reduce staff and premises costs. It could also increase our exposure to fixed capital costs in a cyclical business. IT could increase the success of integrated practice or it could make it easier for separate firms. We believe the likelihood is that IT will do as it has for financial services and favour the large, multi-national, well prepared and technologically advanced firms. New services will emerge and become assential and will separate the `sheep from the goats.'
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	cc87
authors	Johnson, Scott
year	1997
title	What's in a Representation, Why Do We Care, and What Does It Mean? Examining Evidence from Psychology
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 5-15
doi	https://doi.org/10.52842/conf.acadia.1997.005
summary	This paper examines psychological evidence on the nature and role of representations in cognition. Both internal (mental) and external (physical or digital) representations are considered. It is discovered that both types of representation are deeply linked to thought processes. They are linked to learning, the ability to use existing knowledge, and problem solving strategies. The links between representations, thought processes, and behavior are so deep that even eye movements are partly governed by representations. Choice of representations can affect limited cognitive resources like attention and short-term memory by forcing a person to try to utilize poorly organized information or perform "translations" from one representation to another. The implications of this evidence are discussed. Based on these findings, a set of guidelines is presented, for digital representations which minimize drain of cognitive resources. These guidelines describe what sorts of characteristics and behaviors a representation should exhibit, and what sorts of information it should contain in order to accommodate and facilitate design. Current attempts to implement such representations are discussed.
series	ACADIA
email
last changed	2022/06/07 07:52

For more results click below: