Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 521

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	460e
authors	Dannettel, Mark E
year	1997
title	Interactive Multimedia Design: Operational Structures and Intuitive Environments for CD-ROM
doi	https://doi.org/10.52842/conf.caadria.1997.415
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 415-427
summary	This paper presents practical design concepts for the production of CD-ROMs or on-line media projects which are intended for scholastic and professional use. It is based on the experience and knowledge which has been gained while developing a multimedia package here at the Department of Architecture at CUHK. The package deals exclusively with the technical issue of vertical transportation in buildings, and is intended to be used as a design tool in professional offices, as well as in classroom settings. The required research and production for the development of the structures, formats, and interfaces of this project, along with the consequential evaluation and revision of this work, has led to a greater understanding of appropriate applications for interactive interactive multimedia designs. Specially, the paper addresses the fundamental issues of ‘user-format’, and a distinction is made between applications which operate as ‘tools’ and those which operate as ‘resources’. Descriptions are provided for both types of operational formats, and suggestions are made as to how one might decided which format would be appropriate for a specific project. Briefly, resource produces imply that a user actively pursues information in a relatively static environment, while tool procedures imply that a user works jointly with the software to process information and arrive at a unique output. This distinction between the two formats is mostly grounded in the design of the structure and user-interface, and thus the point is made that the material content of the application does not necessarily imply a mandatory use of either format. In light of this observation that an application’s format relies on the appropriateness of operational procedures, rather than on its material content, further discussions of the implications of such procedures (using a ‘resource’ vs. using a ‘tool’) are provided.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	4edc
authors	Eastman, C., Jeng, T.S., Chowdbury, R. and Jacobsen, K.
year	1997
title	Integration of Design Applications with Building Models
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 45-59
summary	This paper reviews various issues in the integration of applications with a building model. First, we present three different architectures for interfacing applications to a building model, with three different structures for applying maps between datasets. The limitations and advantages of these alternatives are reviewed. Then we review the mechanisms for interfacing an application to a building data model, allowing iteration execution and the recognition of instance additions, modifications and deletions.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	1054
authors	Sacks, R. and Warszawski, A.
year	1997
title	Issues in the Development and Implementation of a Building Project Model for an Automated Building System
source	The Int. Journal of Construction IT 5(2), pp. 75-101
summary	While other generalised building project models have been designed to support computer-based integration between various construction applications, we propose that the project model of an Automated System must be specifically designed for the purpose. The aim of an Automated, Computer Integrated Building Realization System is to automatically generate all of the information required for the design, planning and execution of a building project. The project model forms the foundation of the system, and must therefore include all of the relevant information about the facility and the resources required through the various realisation stages. This paper describes a project model designed and implemented specifically for this purpose and details some of the considerations in its development. The model has been tested for life-cycle applicability in a prototype interface of an Automated System. Its completeness at the final stage has also been validated through description of an existing 10 storey building.
series	journal paper
last changed	2003/05/15 21:45

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	2e36
authors	Bourdakis, Vassilis
year	1997
title	Making Sense of the City
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 663-678
summary	Large-scale, three dimensional, interactive computer models of cities are becoming feasible making it possible to test their suitability as a visualisation tool for the design and planning process, for data visualisation where socio-economic and physical data can be mapped on to the 3D form of the city and as an urban information repository. The CASA developed models of the City of Bath and London's West End in VRML format, are used as examples to illustrate the problems arising. The aim of this paper is to reflect on key issues related to interaction within urban models, data mapping techniques and appropriate metaphors for presenting information.
keywords	3D City modeling, Urban Modelling, Virtual Environments, Navigation, Data Mapping, VRML
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	a96b
authors	Cao, Quinsan and Protzen, Jean-Pierre
year	1997
title	Managing Information with Fuzzy Reasoning System in Design Reasoning and Issue-Based Argumentation
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 771-786
summary	Design by argumentation is a natural character of design process with social participation. Issue-Based Information System (IBIS) is an information representation system based on a structured database. It provides a hierarchically linked database structure to manage design information and facilitate design by argumentation. In this paper, we explore the enhancement of IBIS with FRS (Fuzzy Reasoning System) technology. The FRS adds computationally implemented dynamic links to the database of IBIS. Such dynamic links can represent logic relations and reasoning operations among related issues which allows further clarification of relations among issues in IBS. The enhanced system provides a general framework to manage design information and to assist design reasoning, which in turn will contribute to machine assisted design. The final goal is to formulate a system that can represent design knowledge and assist reasoning in design analysis. The system can help designers in clarifying and understanding design related issues, requirements and evaluating potential design alternatives. To demonstrate the system and its potential use, we reexamine a design experiment presented by Schon and represent the design knowledge and reasoning rules of the architects with our system, FRS-IBIS.
series	CAAD Futures
last changed	1999/04/06 09:19

_id	2489
authors	DeLaura, Louis P.
year	1997
title	Old Wine in New Wine Skins: Architecture, Representation and Electronic Media
doi	https://doi.org/10.52842/conf.acadia.1997.073
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 73-82
summary	Architectural computing too often is disengaged from the central culture of architectural discourse and traditional means of making. This paper proposes that one way to bridge this gap is to introduce electronic media in the context of a process-oriented theory of architectural representation - one that is principally concerned with issues of conception, intention, and perception. This approach to the use of computers in the design process requires the introduction of a morphology of representational modes that are intrinsic to the Architect and his musings, and proposes a pedagogical emphasis on electronic media's ability to perform in conjunction with the design intentions of these various representational forms.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	6594
authors	Emdanat, Samir S and Vakalo, Emmanuel G.
year	1997
title	SHAPE GRAMMARS: AN ASSESSMENT OF THEIR UTILITY IN ARCHITECTURE
doi	https://doi.org/10.52842/conf.caadria.1997.313
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 313-321
summary	Shape grammars are generative formalisms that allow spatial computations to be carried out on shapes. This paper examines the assumptions, methodologies, and formalisms underlying shape grammar research in relation to architectural form and its making. The paper first establishes the criteria for evaluating the adequacy of a given generative system. Then, it applies them to the evaluation of the shape grammar formalism. Issues of the representation of style and language, procedural and declarative knowledge representation, as well as, the specificity and generalizability of the formalism will be addressed. The paper argues that, in its present state, shape grammar leaves a great deal to be desired in terms of its descriptive power and generalizability. The paper concludes by exploring some of the desired characteristics for languages of architectural form.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:55

_id	412e
authors	Gross, M.D., Do, E. and McCall, R.J.
year	1997
title	Collaboration and Coordination in Architectural Design: approaches to computer mediated team work
source	TeamCAD 97, 17-23
summary	In 1993 and 1994, instructors and students of architecture at several universities around the world* collaborated briefly on two "virtual design studio" projects. Using off-the-shelf technology of the time-email, CU-See-Me internet video, international conference calls, and exchange of CAD drawings, images, and Quicktime animations-this ambitious project explored the possibility of bringing together diverse members of an international design team together to collaborate on a short term (two week) project. Central to the "Virtual Design Studio" was a 'digital pinup board', an area where participating designers could post and view drawings and textual comments; video links and email exchange provided the media for direct communication media about designs. A report on the project [21] makes clear that the process was not without technical difficulties: a significant amount of communication concerned scheduling and coordinating file formats; disappointingly little was devoted to discussions of design issues. Although it's clear that many of the minor technical problems that inevitably plague a forward-looking effort like the Virtual Design Studio will be solved in the near term, the project also reveals the need for research on software and design practices to make computer mediated design collaboration realize its attractive promise.
series	journal paper
email
last changed	2003/04/23 15:50

_id	4df8
authors	Hanna, R., Barber T. and Qaqish, R.
year	1997
title	Computers as the Sole Design Tool: The Mackintosh Experiment
doi	https://doi.org/10.52842/conf.ecaade.1997.x.j8r
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper reports on the findings of an empirical investigation into the use of the computer as the only design media in solving a design problem. Several 1st and 2nd year students took part in a two week experiment on the use of a CAD programme, AutoCAD 13 and AEC 5.0, to design a studio for a graphic designer. Prior to the experiment an extensive literature search was carried out to explore the relationship between the design process, visual thinking, conventional sketching (interactive imagery) and Computer Aided Design. Out of this search a number of design variables were identified, developed and then tested through a series of observations and interviews with the students while they were engaged in the design of the Graphic Designer’s Studio. Questionnaires were also administered to students to explore their views on issues including, using CAD instead of conventional tools, design areas where CAD is most effective, and how CAD can improve design skills.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/hanna/hanna.htm
last changed	2022/06/07 07:50

_id	db13
authors	Jacobsen, K., Eastman, C. and Tay, S.J.
year	1997
title	Information management in creative engineering design and capabilities of database transactions
source	Automation in Construction 7 (1) (1997) pp. 55-69
summary	This paper examines the information management requirements and sets forth the general criteria for collaboration and concurrency control in creative engineering design. Our work attempts to recognize the full range of concurrency, collaboration and complex transactions structure now practiced in manual and semi-automated design and the range of capabilities needed as the demands for enhanced but flexible electronic information management unfolds.The objective of this paper is to identify new issues that may advance the use of databases to support creative engineering design. We start with a generalized description of the structure of design tasks and how information management in design is dealt with today. After this review, we identify extensions to current information management capabilities that have been realized and/or proposed to support/augment what designers can do now.Given this capability-based starting point, we review existing database and information management capabilities, as presented in the literature. In the review, we identify the gaps between current concurrency and collaboration technology and what is needed or would be desirable. Our objective is to assess current research and to identify new issues that may advance the use of databases to support creative engineering design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	e373
authors	Johnson, Robert E. and Clayton, Mark
year	1997
title	The Impact of Information Technology in Design and Construction: The Owner's Perspective
doi	https://doi.org/10.52842/conf.acadia.1997.229
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 229-241
summary	This paper reports on findings of a November 1996 exploratory survey of architecture-engineering clients (Fortune 500 corporate facility managers). This research investigated how the practices of corporate facility managers are being influenced by rapid changes in information technology. The conceptual model that served as a guide for this research hypothesized that information technology acts as both an enabler (that is, information technology provides an effective mechanism for managers to implement desired changes) as well as a source of innovation (that is, new information technology innovations create new facility management opportunities). The underlying assumption of this research is that information technology is evolving from a tool that incrementally improves "back-office" productivity to an essential component of strategic positioning that may alter the basic economics, organizational structure and operational practices of facility management organizations and their interactions with service providers (architects, engineers and constructors). The paper concludes with a discussion of researchable issues.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	a518
authors	Jules, F.
year	1997
title	AutoCAD conventions for architects
source	Albany, NY: Delmar Publishers, Autodesk Press
summary	This book offers step-by-step explanations on how to set up detailed databases and how to create a series of drawing sheets and pages for use in day-to-day operations. The accompanying data disk includes settings, formats and symbol libraries for AutoCAD Releases 12 and 13. Putting the tools to work is easy with the "fill in the blank" files in Microsoft Word and Excel for developing architectural schedules, meeting notes, code analysis, programming and other office functions. The chapter on schematic design addresses the issues of effective use of AutoCAD in creating design and presentations.
series	other
last changed	2003/04/23 15:14

_id	0bc0
authors	Kellett, R., Brown, G.Z., Dietrich, K., Girling, C., Duncan, J., Larsen, K. and Hendrickson, E.
year	1997
title	THE ELEMENTS OF DESIGN INFORMATION FOR PARTICIPATION IN NEIGHBORHOOD-SCALE PLANNING
doi	https://doi.org/10.52842/conf.acadia.1997.295
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 295-304
summary	Neighborhood scale planning and design in many communities has been evolving from a rule-based process of prescriptive codes and regulation toward a principle- and performance-based process of negotiated priorities and agreements. Much of this negotiation takes place in highly focused and interactive workshop or 'charrette' settings, the best of which are characterized by a fluid and lively exchange of ideas, images and agendas among a diverse mix of citizens, land owners, developers, consultants and public officials. Crucial to the quality and effectiveness of the exchange are techniques and tools that facilitate a greater degree of understanding, communication and collaboration among these participants. Digital media have a significant and strategic role to play toward this end. Of particular value are representational strategies that help disentangle issues, clarify alternatives and evaluate consequences of very complex and often emotional issues of land use, planning and design. This paper reports on the ELEMENTS OF NEIGHBORHOOD, a prototype 'electronic notebook' (relational database) tool developed to bring design information and example 'to the table' of a public workshop. Elements are examples of the building blocks of neighborhood (open spaces, housing, commercial, industrial, civic and network land uses) derived from built examples, and illustrated with graphic, narrative and numeric representations relevant to planning, design, energy, environmental and economic performance. Quantitative data associated with the elements can be linked to Geographic Information based maps and spreadsheet based-evaluation models.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	diss_kim
id	diss_kim
authors	Kim, S.
year	1997
title	Version Management in Computer-Aided Architectural Design
source	Harvard University, Cambridge, Massachusetts
summary	This thesis introduces the requirements for version support in a computer-aided architectural design system which seeks to support the work of designers in the early stages of design. It addresses the problems of current computer-aided design systems when they are used for conceptual design. Perceiving the implications of mature technology, this thesis provides a model of version management. The model makes use of object-oriented technology to link the design process and the design artifacts in a dynamic manner, providing a powerful tool for conceptual design. By capturing design versions, and keeping track of multiple design sessions, designers will be able to reuse design ideas, and check on the progress of current design while the interruption of design thinking is minimized. The creation of the design history is considered to be the creation of the version history. By being able to navigate and modify the design history, the issues of design reuse, alternative designs, and the preservation of design information can be facilitated. This thesis presents a working prototype based on the version management model.
series	thesis:PhD
more	http://archmedia.yonsei.ac.kr/pdf/
last changed	2003/11/28 07:38

_id	c59c
authors	Kokosalakis, Jen
year	1997
title	C AD VANTAGE for Communities, Professionals and Students
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 235-254
summary	I propose to consider how added value for professionals, and the consumers of their buildings and students of these processes might be attained. Through the vehicle of new technologies including the humble 'CAD' system a fuller collaboration in design decision- making is aided through representation of 3 dimensional design ideas and their comprehension from different 'vantage' points. Thus computing may enhance opportunity for more informed dialogue involving verbal and visual responses between the intentions of the architect and client and promise to open up more of the architectural design process to participation by the building consumers, bringing advantage' to all actors in the design process. More liberated sketching at the system is becoming evident as programmers, and users' skills adapt to the search for more enabling, creative and easier tools, procedures and interfaces freeing responsiveness to consumer wishes. Reflection from clients and practitioners brings hope that a more informed dialogue is enabled through computer supported designing. The beginnings of CAAD support to community groups acts as a facilitator. Contacting and working with community groups follows effective 'Community Development' precedents established in the Liverpool of the sixties; to contact, activate, enable and provide necessary skill supports for community-driven striving for resolution of housing problems. Results of this, ploughed back into CAD teaching for Environmental Planners, brings increased awareness and visualisation of environmental, architectural and human issues and promises to begin a new cycle of more informed participation for citizens, architects, planners and consultants.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	cb26
authors	Koutamanis, Alexander
year	1997
title	Digital Architectural Visualization
doi	https://doi.org/10.52842/conf.ecaade.1997.x.p8n
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The traditional emphasis of architectural education and practice on spatial visualization has contributed to the development of an overtly visual architectural culture which agrees with our predominantly visual interaction with the built environment. The democratization of computer technologies is changing architectural visualization in two significant ways. The first is that the availability of affordable, powerful digital versions of analogue visual media and of new, complementary techniques is facilitating the application of computer visualization in most aspects of the design and management of the built environment. The second is the opening of a wide and exciting new market for visualization in information systems, for example through interfaces that employ spatial metaphors, which arguably are extensions of the three dimensional structures the architect knows better than other design specialists of today. The transition from analogue to digital visualization poses questions that encompass the traditional investigation of relationships between geometric representations and built form, as well as issues such as a unified theory of architectural representation, the relationships between analysis and visualization and the role of abstraction in the structure of a representation. In addition to theoretical investigations, the utilization of new possibilities in architectural visualization requires technology and knowledge transfer from areas other than computer science. The integration of such transfers suggests flexible, modular approach which contradicts the holistic, integral principles of computer-aided architectural design.
keywords	Visualization
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/koutam/koutam1.htm
last changed	2022/06/07 07:50

_id	c669
authors	Koutamanis, Alexander
year	1997
title	On the Evaluation of Architectural Figural Goodness: A Foundation for Computational Architectural Aesthetic
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 245-266
summary	The first stage of an investigation into the quantification and computability of architectural aesthetics is reported. Issues considered include the function, sources and role of aesthetic analysis in architecture in the framework of a descriptive approach to architectural analysis and design. The main focus is on the applicability of the concept of figural goodness to architectural aesthetics and the derivation of a representation for architectural form suitable to this purpose.
series	CAAD Futures
email
more	http://www.bk.tudelft.nl/informatica/koutamanis
last changed	1999/04/06 09:30

_id	789d
authors	Kvan, Th., West, R. and Vera, A.
year	1997
title	Tools for a Virtual Design Community
source	Preprints Formal Aspects of Collaborative CAD, ed. M. L. Maher, J. S. Gero & F. Sudweeks, Sydney: Key Centre of Design Computing, Department of Architectural and Design Science, University of Sydney, pp. 109-123
summary	This paper proposes a methodology to evaluate the effects of computer-mediated communication on collaboratively solving design problems. When setting up a virtual design community; choices must be made between a variety of tools; choices dictated by budget; bandwidth; ability and availability. How do you choose between the tools; which is useful and how will each affect the outcome of the design exchanges you plan? A commonly used method is to analyze the work done and to identify tools which support this type of work. In general; research on the effects of computer-mediation on collaborative work has concentrated mainly on social-psychological factors such as deindividuation and attitude polarization; and used qualitative methods. In contrast; we propose to examine the process of collaboration itself; focusing on separating those component processes which primarily involve individual work from those that involve genuine interaction. Extending the cognitive metaphor of the brain as a computer; we view collaboration in terms of a network process; and examine issues of control; coordination; and delegation to separate sub-processors. Through this methodology we attempt to separate the individual problem-solving component from the larger process of collaboration.
keywords	CSCW; Group Work; Design; Expertise; Collaboration; Novice
series	other
email
last changed	2002/11/15 18:29

For more results click below: