Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 514

Reformat results as: short short into frame detailed detailed into frame

_id	060b
authors	Af Klercker, J.
year	1997
title	A National Strategy for CAAD and IT-Implementation in the Construction Industry the Construction Industry
doi	https://doi.org/10.52842/conf.ecaade.1997.x.o8u
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The objective of this paper is to present a strategy for implementation of CAD and IT in the construction and building management#1 industry in Sweden. The interest is in how to make the best use of the limited resources in a small country or region, cooperating internationally and at the same time avoiding to be totally dominated by the great international actors in the market of information technology. In Sweden representatives from the construction and building management industry have put forward a research and development program called: "IT-Bygg#2 2002 - Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. The presented strategy is based on a seminar with some of the most experienced researchers, developers and practitioners of CAD in Sweden. The activities were recorded and annotated, analyzed and put together afterwards. The proposal in brief is that object oriented distributed CAD is to be used in the long perspective. It will need to be based on international standards such as STEP and it will take at least another 5 years to get established. Meanwhile something temporary has to be used. Pragmatically a "de facto standard" on formats has to be accepted and implemented. To support new users of IT all software in use in the country will be analyzed, described and published for a national platform for IT-communication within the construction industry. Finally the question is discussed "How can architect schools then contribute to IT being implemented within the housing sector at a regional or national level?" Some ideas are presented: Creating the good example, better support for the customer, sharing the holistic concept of the project with all actors, taking part in an integrated education process and international collaboration like AVOCAAD and ECAADE.
keywords	CAAD, IT, Implementation, Education, Collaboration
series	eCAADe
type	normal paper
email
more	http://info.tuwien.ac.at/ecaade/proc/afklerck/afklerck.htm
last changed	2022/06/07 07:50

_id	2b38
authors	Bradford, J., Wong, R. and Yeung, C.S.K.
year	1997
title	Hierarchical Decomposition of Architectural Computer Models
doi	https://doi.org/10.52842/conf.caadria.1997.197
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 197-203
summary	Architectural models can be represented in a hierarchy of complexity. Higher level or more complex architecture structures are then designed by repetitively instantiating libraries of building blocks. The advantages are that the object can be achieved in modular fashion and any modification to the definition of a building block can be easily propagated to all higher level objects using the block. Unfortunately, many existing representations of architectural models are monolithic instead of hierarchical and modular, thus, making the reuse of models very difficult and inefficient. This paper describes a research project on developing a tool to decompose a monolithic architectural model into elementary building blocks and then create a hierarchy in the model representation. The tool provides a graphical interface for the visualization of a model and a cutting plane. An associated algorithm will then automatically detach parts of the model into building blocks depending on where the user is applying the cutting plane. Studies will also be made on dividing more complex models employing spherical and NURBS surfaces.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	751d
authors	Cubero, R., Caldera, N., Indriago, J.A., Camacaro, L., Nixon, M. and Cestary, J.
year	2001
title	Georeferenciando revicios y recursos turisticos para la plaificacion territorial: El Sigtur-Zulia [Georeferential Services and Touristic Resources for Territorial Planning: The Sigtur-Zulia]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 146-155
summary	In 1997, the Research Institute of Faculty of Architecture and Design, University of Zulia, started the R&D project of a decision making support system for tourism planning. For this, GIS technologies have been used for geocodification and spatial analysis of all the tourism facilities and resources existing in Zulia State, studying this kind of socioeconomic development according to critical poverty problems that are typical of their population. This paper describes this geographic information system, with the application of accessibility analysis, areas of influence, and threedimensional studies through network analysisó three-dimensional analysis with ArcView GIS clients, ArcExplorer clients, and MapObjects clients, on an MS Windows NT client/server environment.
keywords	GIS; Tourism Planning; Internet; Desktop Mapping
series	other
email
last changed	2003/02/14 08:29

_id	0627
authors	Dijkstra, J. and Timmermans, H.J.P.
year	1997
title	Exploring the Possibilities of Conjoint Measurement as a Decision-Making Tool for Virtual Wayfinding Environments
doi	https://doi.org/10.52842/conf.caadria.1997.061
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 61-71
summary	Virtual reality systems may have a lot to offer in architecture and urban planning when visual and active environments may have a dramatic impact on individual preferences and choice behaviour. Conjoint analysis involves the use of designed hypothetical choice situations to measure individuals’ preferences and predict their choice in new situations. Conjoint experiments involve the design and analysis of hypothetical decision tasks. Alternatives are described by their main features, called attributes. Multiple hypothetical alternatives, called product profiles, are generated and presented to respondents, who are requested to express their degree of preference for these profiles or choose between these profiles. Conjoint experiments have become a popular tool to model individual preferences and decision-making in a variety of research areas. Most studies of conjoint analysis have involved a verbal description of product profiles, although some studies have used a pictorial presentation of production profiles. Virtual reality systems offer the potential of moving the response format beyond these traditional response modes. This paper describes a particular aspect of an ongoing research project which aims to develop a virtual reality based system for conjoint analysis. The principles underlying the system will be illustrated by a simple example of wayfinding in a virtual environment.
series	CAADRIA
last changed	2022/06/07 07:55

_id	af28
authors	Dijkstra, J. and Timmermans, H.J.P.
year	1997
title	The Application of Conjoint Measurement as a Dynamic Decision Making Tool in a Virtual Reality Environment
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 757-770
summary	This paper describes an innovative aspect of an ongoing research project to develop a virtual reality based conjoint analysis system. Conjoint analysis involves the use of designed hypothetical choice situations to measure subjects' preferences and predict their choice in new situations. Conjoint experiments involve the design and analysis of hypothetical decision tasks. Hypothetical alternatives, called product profiles, are generated and presented to subjects. A virtual reality presentation format has been used to represent these profiles. A profile consists of a virtual environment model and dynamic virtual objects representing the attributes with their respective levels. Conventional conjoint choice models are traditionally based on preference or choice data, not on dynamic decision making aspects. The status of this new approach will be described.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	07d8
authors	Garza, J.M. de la and Howitt, I.
year	1998
title	Wireless communication and computing at the construction jobsite
source	Automation in Construction 7 (4) (1998) pp. 327-347
summary	For many years, the walkie-talkie has been synonymous with the construction industry. During jobsite project execution, there are three variables which can either hinder or facilitate successful results, namely, quality, quantity, and timing of information. Wireless data communications technology is capable of delivering just-in-time information within the `last mile' between the trailer and a desired location on the jobsite. This paper reports on a study which surveyed information needs at the jobsite, emerging wireless data communications technology, and assessed the extent to which wireless data technology can fulfill the information needs of the jobsite [J.M. de la Garza, I. Howitt, Wireless communication and computing at the jobsite, Research Report 136-11, Construction Industry Institute, Austin, TX, 1997]. We have organized jobsite information needs into the following ten categories: (a) requests for information, (b) materials management, (c) equipment management, (d) cost management, (e) schedule and means and methods, (f) jobsite record keeping, (g) submittals, (h) safety, (i) QC/QA, and (k) future trends. Each category was analyzed in terms of its appropriateness to take advantage of wireless technology. The four formats considered to transmit information wirelessly were: (a) live voice, (b) live video, (c) batched data, and (d) live data. Current wireless communication technology has been classified into the following five classes: (a) circuit-switched wireless data systems, (b) packet-switched wireless data systems––this class was further subdivided into specialized mobile radio systems and cellular digital packet data systems, (c) wireless local area networks, (d) paging systems, and (e) satellite-based data communications. A primer for wireless communications covering both fundamental and advanced communications concepts has also been included to enable a better understanding of the issues involved in making trade-offs while configuring a wireless jobsite communication system. The example presented in this paper shows how a contractor can define a subset of information needs by choosing from those already articulated herein and determine if a given wireless technology should even be considered as a viable way of meeting the information needs that such company has.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	a99e
authors	Kalay, Yehuda E.
year	1997
title	P3: An Integrated Environment to Support Design Collaboration
doi	https://doi.org/10.52842/conf.acadia.1997.191
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 191-205
summary	Buildings are the combined product of the efforts of many participants interacting in complex ways over a prolonged period of time. Currently, sequential communication among the participants is the standard means of collaboration. This method, which is well suited to current legal and professional practices, is inefficient, fraught with loss of information and prone to errors, cost and schedule overruns, and promotes optimization of individual parts at the expense of the overall project. This paper describes an integrated design environment that will facilitate collaborative decision making among the various participants, not merely communicate the results of decisions made by one participant to the other participants in the design team. It is based on the convergence of computing and telecommunication technologies, coupled with the emergence of new design paradigms, which together can overcome the technical difficulties associate with current collaborative design practices. It comprises three different modules: a product model, a performance model, and a process model (hence it is called P3). The paper presents each of these models and their integration into a unified framework.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	895d
authors	Liou, S.-R., Vakalo, E.-G. and Chang, K.-C.
year	1997
title	An Experiment on Hybrid Architectural Form-Making
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 837-842
summary	This paper illustrates an approach to hybrid architectural form-making. A hypothetical project - the Des Moines Art Center 3rd Addition - is employed as a design experiment. The computer is used as a form-searching medium in the form-making process. Suggesting an addition to the existing center designed by Saarinen, Pei, and Meier, the designer is confronting the problem of how to respond to the three distinct architectural styles. The proposed solution to this problem is to create a hybrid building which inherits architectural properties from those precedents. Potentials of the use of the computer for such task are discussed.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	abe6
authors	Wojtowicz, J., Houwen, J., and Shakarchi, A.
year	1997
title	Making of OBELISK: Multimedia Archiving System
doi	https://doi.org/10.52842/conf.acadia.1997.307
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 307-317
summary	This paper gives an account of the development of a multimedia archiving system for architectural design education, reveals its framework, and sets the agenda for future versions of the project. The OBELISK is now released on CD-ROM for both Windows and Macintosh. The Shockwave version and more information can be found at http://www.architecture.ubc.ca/obelisk.
series	ACADIA
email
more	http://www.architecture.ubc.ca/obelisk
last changed	2022/06/07 07:57

_id	75a8
authors	Achten, Henri H.
year	1997
title	Generic representations : an approach for modelling procedural and declarative knowledge of building types in architectural design
source	Eindhoven University of Technology
summary	The building type is a knowledge structure that is recognised as an important element in the architectural design process. For an architect, the type provides information about norms, layout, appearance, etc. of the kind of building that is being designed. Questions that seem unresolved about (computational) approaches to building types are the relationship between the many kinds of instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called ‘prototypes’) face problems clarifying these questions. The research work at hand proposes to investigate the role of knowledge associated with building types in the design process.Knowledge of the building type must be represented during the design process. Therefore, it is necessary to find a representation which supports design decisions, supports the changes and transformations of the design during the design process, encompasses knowledge of the design task, and which relates to the way architects design. It is proposed in the research work that graphic representations can be used as a medium to encode knowledge of the building type. This is possible if they consistently encode the things they represent; if their knowledge content can be derived, and if they are versatile enough to support a design process of a building belonging to a type.A graphic representation consists of graphic entities such as vertices, lines, planes, shapes, symbols, etc. Establishing a graphic representation implies making design decisions with respect to these entities. Therefore it is necessary to identify the elements of the graphic representation that play a role in decision making. An approach based on the concept of ‘graphic units’ is developed. A graphic unit is a particular set of graphic entities that has some constant meaning. Examples are: zone, circulation scheme, axial system, and contour. Each graphic unit implies a particular kind of design decision (e.g. functional areas, system of circulation, spatial organisation, and layout of the building). By differentiating between appearance and meaning, it is possible to define the graphic unit relatively shape-independent.If a number of graphic representations have the same graphic units, they deal with the same kind of design decisions. Graphic representations that have such a specifically defined knowledge content are called ‘generic representations.’ An analysis of over 220 graphic representations in the literature on architecture results in 24 graphic units and 50 generic representations. For each generic representation the design decisions are identified. These decisions are informed by the nature of the design task at hand. If the design task is a building belonging to a building type, then knowledge of the building type is required. In a single generic representation knowledge of norms, rules, and principles associated with the building type are used. Therefore, a single generic representation encodes declarative knowledge of the building type. A sequence of generic representations encodes a series of design decisions which are informed by the design task. If the design task is a building type, then procedural knowledge of the building type is used.By means of the graphic unit and generic representation, it is possible to identify a number of relations that determine sequences of generic representations. These relations are: additional graphic units, themes of generic representations, and successive graphic units. Additional graphic units defines subsequent generic representations by adding a new graphic unit. Themes of generic representations defines groups of generic representations that deal with the same kind of design decisions. Successive graphic units defines preconditions for subsequent or previous generic representations. On the basis of themes it is possible to define six general sequences of generic representations. On the basis of additional and successive graphic units it is possible to define sequences of generic representations in themes. On the basis of these sequences, one particular sequence of 23 generic representations is defined.The particular sequence of generic representations structures the decision process of a building type. In order to test this assertion, the particular sequence is applied to the office building type. For each generic representation, it is possible to establish a graphic representation that follows the definition of the graphic units and to apply the required statements from the office building knowledge base. The application results in a sequence of graphic representations that particularises an office building design.Implementation of seven generic representations in a computer aided design system demonstrates the use of generic representations for design support. The set is large enough to provide additional weight to the conclusion that generic representations map declarative and procedural knowledge of the building type.
series	thesis:PhD
email
more	http://alexandria.tue.nl/extra2/9703788.pdf
last changed	2003/11/21 15:15

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	411c
authors	Ataman, Osman and Bermúdez (Ed.)
year	1999
title	Media and Design Process [Conference Proceedings]
doi	https://doi.org/10.52842/conf.acadia.1999
source	ACADIA ‘99 Proceedings / ISBN 1-880250-08-X / Salt Lake City 29-31 October 1999, 353 p.
summary	Throughout known architectural history, representation, media and design have been recognized to have a close relationship. This relationship is inseparable; representation being a means for engaging in design thinking and making and this activity requiring media. Interpretations as to what exactly this relationship is or means have been subject to debate, disagreement and change along the ages. Whereas much has been said about the interactions between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues (1997), that we have enough context to be able to see and address the relationship between media and human activities with some degree of perspective.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

_id	817b
authors	Bong, C.W. and Wang, Y.C.
year	2002
title	A Shape Compactness Measurement Indexing with Fuzzy Multicriteria Decision Making Approach
doi	https://doi.org/10.52842/conf.caadria.2002.093
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 093-100
summary	Compactness of a district or zone is determined by considering its appearance and the area of dispersal of the district (Altman, 1998) and it is used as a characteristic to describe shape (Shiode, 1998; Knight, 1997). However, existing compactness measurement used to assess district plans in redistricting applications are vague and imprecision although there are more than thirty over Euclidean or non-Euclidean measurement methods. Therefore, this paper presents an integrated shape compactness measurement indexing with a fuzzy multicriteria decision making approach (FMCDM) to enhance the measurement of shape compactness. An experiment is conducted in order to verify the practically of the proposed model to improve existing compactness measurement method.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	2e36
authors	Bourdakis, Vassilis
year	1997
title	Making Sense of the City
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 663-678
summary	Large-scale, three dimensional, interactive computer models of cities are becoming feasible making it possible to test their suitability as a visualisation tool for the design and planning process, for data visualisation where socio-economic and physical data can be mapped on to the 3D form of the city and as an urban information repository. The CASA developed models of the City of Bath and London's West End in VRML format, are used as examples to illustrate the problems arising. The aim of this paper is to reflect on key issues related to interaction within urban models, data mapping techniques and appropriate metaphors for presenting information.
keywords	3D City modeling, Urban Modelling, Virtual Environments, Navigation, Data Mapping, VRML
series	CAAD Futures
email
last changed	2003/11/21 15:16

_id	0024
authors	Breen, J. and Dijk, T. van
year	1997
title	Modelling for eye level composition; design media experiments in an educational setting.
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	In order to simulate the visual effects of designs at eye level, it is necessary to construct models from which (sequences of) images can be taken. This holds true for both Optical Endoscopy and Computer Aided Visualisation techniques. In what ways can an eye level approach stimulate spatial awareness and create insights into the workings of a design concept? Can Endoscopic methods be used effectively as a creative environment for design decision-making and teamwork and even to stimulate the generation of new design ideas? How should modelmaking be considered if it is to be of use in an ‘impatient’ design process, and how can students be made aware of the opportunities of both direct eye level observations from design models and of the more sophisticated endoscopic imaging techniques? This paper explores the theme of eye level modelling by focusing on a number of formal exercises and educational experiments carried out by the Delft Media group in recent years. An attempt is made to describe and evaluate these experiences, in order to draw conclusions and to signal possible new opportunities for eye level composition for the benefit of both design education and practice...
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	ae56
authors	Bruton, Dean
year	1997
title	Grammars and Art - A Contingent Sense of Rules
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 71-82
summary	This paper contributes to the debate about the utility of the grammatical paradigm in art and design. It reports an investigation of the contingent sense in which grammars and grammatical design apply in the practice of form making in art using two complementary research strategies: the examination through a perspective of grammatical design of some selected bodies of art work, including interviews with artists, theorists and designers; and the reflective practice of image making with computer media in my own work as an artist. The major hypothesis is that a contingent, sense of grammar can facilitate the creation, understanding, and discussion of form-making in art. The sub-hypotheses are that (1) An understanding of grammatical design can enhance a reflective design activity, and that (2) Revealing the contingency of grammars can expose moments of inspiration and redirection in a reflective design activity.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	1073
authors	Bruton, Dean
year	1997
title	A contingent sense of grammar
source	University of Adelaide
summary	Investigates the contingent senses in which concepts of grammars and grammatical design apply in the practice of form making in art and design. Using the strategies of a literature review; an examination through a perspective of grammatical design of some selected bodies of art work, including interviews with artists, theorists and some designers; and the reflective practice of image making with computer media in the author's own work as an artists.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	d869
authors	Chu, C.-C., Dani, T.H. and Gadh, R.
year	1997
title	Multi-sensory user interface for a virtual-reality-based computer-aided design system
source	Computer-Aided Design, Vol. 29 (10) (1997) pp. 709-725
summary	The generation of geometric shapes called `geometric concept designs' via the multi-sensory user interface of a virtual reality (VR) based system motivates the currentresearch. In this new VR-based system, geometric designs can be more effectively inputted into the computer in a physically intuitive way. The interaction mechanism issimilar to the way in which industrial designers sit and discuss concept design shapes across a table from each other, prior to making a final decision about the productdetails. By using different sensory modalities, such as voice, hand motions and gestures, product designers can convey design ideas through the VR-basedcomputer-aided design (CAD) system. In this scenario, the multi-sensory interface between human and computer plays a central role with respect to usability, usefulnessand accuracy. The current paper focuses on determining the requirements for the multi-sensory user interface and assessing the applications of different input and outputmechanisms in the virtual environment (VE). In order to evaluate this multi-sensory user interface, this paper formulates the typical activities in product shape design intoa set of requirements for the VR-CAD system. On the basis of these requirements, we interviewed typical CAD users about the effectiveness of using different sensoryinput and output interaction mechanisms such as visual, auditory and tactile. According to the results of these investigations, a nodal network of design activity thatdefines the multi-sensory user interface of the VR-CAD system is determined in the current research. The VR-CAD system is still being developed. However, voicecommand input, hand motion input, three-dimensional visual output and auditory output have been successfully integrated into the current system. Moreover, severalmechanical parts have been successfully created through the VR interface. Once designers use the VR-CAD system that we are currently developing, the interfacerequirements determined in the current paper may be verified or refined. The objectives of the current research are to expand the frontiers of product design and establisha new paradigm for the VR-based conceptual shape design system.
keywords	Virtual Reality, Multi-Sensory User Interface, Conceptual Shape Design, Sensory Interaction Mechanism
series	journal paper
last changed	2003/05/15 21:33

For more results click below: