Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 520

Reformat results as: short short into frame detailed detailed into frame

_id	4cce
authors	Monedero, Javier
year	1997
title	Parametric Design. A Review and Some Experiences
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.q8p
summary	During the last few years there has been an extraordinary development of computer aided tools intended to present or communicate the results of architectural projects. But there has not been a comparable progress in the development of tools intended to assist design to generate architectural forms in an easy and interactive way. Even worst, architects who use the powerful means provided by computers, as a direct tool to create architectural forms are still an exception. Architecture continues to be produced by traditional means using the computer as little more than a drafting tool. The main reasons that may explain this situation can be identified rather easily, although there will be significant differences of opinion. Mine is that it is a mistake trying to advance too rapidly and, for instance, propose integrated design methods using expert systems and artificial intelligence resources when do not have still an adequate tool to generate and modify simple 3D models. The modelling tools we have at the present moment are clearly unsatisfactory. Their principal limitation is the lack of appropriate instruments to modify interactively the model once it has been created. This is a fundamental aspect in any design activity, where the designer is constantly going forward and backwards, reelaborating once and again some particular aspect of the model, or its general layout, or even coming back to a previous solution that had been temporarily abandoned.
keywords	Parametric Design
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/moneder/moneder.htm
last changed	2022/06/07 07:50

_id	01e7
authors	Kvan, Thomas
year	1997
title	Studio Teaching Without Meeting: Pedagogical Aspects of a Virtual Design Studio
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 163-177
doi	https://doi.org/10.52842/conf.caadria.1997.163
summary	Virtual Design Studios are proliferating. Schools of architecture are eagerly experimenting with the technology of the Internet. Discussions about Virtual Design Studios typically focus on technological issues – which hardware, what software – or environments – MOOs, ftp. Recently, some papers have been written on the perceptual issues and the social aspects of remote design collaborations, thus contributing to some of the contextual issues within which virtual studios are conducted. This paper contributes another perspective, presenting a review of the pedagogical issues raised in a VDS. It examines the difficulties and opportunities which present themselves in teaching a Virtual Design Studio. Based on reviews of problem-based learning and examinations of architectural studio learning, including several experiences in conducting virtual studios, the author considers the particularities of conducting a studio in the virtual world, the motivations for these studios, the experiences of students and the results obtained. From this background, the author identifies benefits and drawbacks of teaching in this manner, leading then to guidelines for framing and conducting effective and successful Virtual Design Studios and raises issues for further discussion.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	77bc
authors	Cohen, S., Elber, G. and Bar-Yehuda, R.
year	1997
title	Matching of freeform curves
source	Computer-Aided Design, Vol. 29 (5) (1997) pp. 369-378
summary	Freeform parametric curves are extensively employed in various fields such as computer graphics, computer vision, robotics, and geometric modeling. While manyapplications exploit and combine univariate freeform entities into more complex forms such as sculptured surfaces, the problem of a fair or even optimal relativeparameterization of freeforms, under some norm, has been rarely considered. In this work, we present a scheme that closely approximates the optimal relativematching between two or even n given freeform curves, under a user's prescribed norm that is based on differential properties of the curves. This matching iscomputed as a reparameterization of n - 1 of the curves that can be applied explicitly using composition. The proposed matching algorithm is completely automaticand has been successfully employed in different applications with several demonstrated herein: metamorphosis of freeform curves with feature preservations, keyframe interpolation for animation, self-intersection free ruled surface construction, and automatic matching of rail curves of blending surfaces.
keywords	Dynamic Programming, Tangent/Gauss Map, Feature Recognition, Fairness
series	journal paper
last changed	2003/05/15 21:33

_id	536e
authors	Bouman, Ole
year	1997
title	RealSpace in QuickTimes: architecture and digitization
source	Rotterdam: Nai Publishers
summary	Time and space, drastically compressed by the computer, have become interchangeable. Time is compressed in that once everything has been reduced to 'bits' of information, it becomes simultaneously accessible. Space is compressed in that once everything has been reduced to 'bits' of information, it can be conveyed from A to B with the speed of light. As a result of digitization, everything is in the here and now. Before very long, the whole world will be on disk. Salvation is but a modem away. The digitization process is often seen in terms of (information) technology. That is to say, one hears a lot of talk about the digital media, about computer hardware, about the modem, mobile phone, dictaphone, remote control, buzzer, data glove and the cable or satellite links in between. Besides, our heads are spinning from the progress made in the field of software, in which multimedia applications, with their integration of text, image and sound, especially attract our attention. But digitization is not just a question of technology, it also involves a cultural reorganization. The question is not just what the cultural implications of digitization will be, but also why our culture should give rise to digitization in the first place. Culture is not simply a function of technology; the reverse is surely also true. Anyone who thinks about cultural implications, is interested in the effects of the computer. And indeed, those effects are overwhelming, providing enough material for endless speculation. The digital paradigm will entail a new image of humankind and a further dilution of the notion of social perfectibility; it will create new notions of time and space, a new concept of cause and effect and of hierarchy, a different sort of public sphere, a new view of matter, and so on. In the process it will indubitably alter our environment. Offices, shopping centres, dockyards, schools, hospitals, prisons, cultural institutions, even the private domain of the home: all the familiar design types will be up for review. Fascinated, we watch how the new wave accelerates the process of social change. The most popular sport nowadays is 'surfing' - because everyone is keen to display their grasp of dirty realism. But there is another way of looking at it: under what sort of circumstances is the process of digitization actually taking place? What conditions do we provide that enable technology to exert the influence it does? This is a perspective that leaves room for individual and collective responsibility. Technology is not some inevitable process sweeping history along in a dynamics of its own. Rather, it is the result of choices we ourselves make and these choices can be debated in a way that is rarely done at present: digitization thanks to or in spite of human culture, that is the question. In addition to the distinction between culture as the cause or the effect of digitization, there are a number of other distinctions that are accentuated by the computer. The best known and most widely reported is the generation gap. It is certainly stretching things a bit to write off everybody over the age of 35, as sometimes happens, but there is no getting around the fact that for a large group of people digitization simply does not exist. Anyone who has been in the bit business for a few years can't help noticing that mum and dad are living in a different place altogether. (But they, at least, still have a sense of place!) In addition to this, it is gradually becoming clear that the age-old distinction between market and individual interests are still relevant in the digital era. On the one hand, the advance of cybernetics is determined by the laws of the marketplace which this capital-intensive industry must satisfy. Increased efficiency, labour productivity and cost-effectiveness play a leading role. The consumer market is chiefly interested in what is 'marketable': info- and edutainment. On the other hand, an increasing number of people are not prepared to wait for what the market has to offer them. They set to work on their own, appropriate networks and software programs, create their own domains in cyberspace, domains that are free from the principle whereby the computer simply reproduces the old world, only faster and better. Here it is possible to create a different world, one that has never existed before. One, in which the Other finds a place. The computer works out a new paradigm for these creative spirits. In all these distinctions, architecture plays a key role. Owing to its many-sidedness, it excludes nothing and no one in advance. It is faced with the prospect of historic changes yet it has also created the preconditions for a digital culture. It is geared to the future, but has had plenty of experience with eternity. Owing to its status as the most expensive of arts, it is bound hand and foot to the laws of the marketplace. Yet it retains its capacity to provide scope for creativity and innovation, a margin of action that is free from standardization and regulation. The aim of RealSpace in QuickTimes is to show that the discipline of designing buildings, cities and landscapes is not only a exemplary illustration of the digital era but that it also provides scope for both collective and individual activity. It is not just architecture's charter that has been changed by the computer, but also its mandate. RealSpace in QuickTimes consists of an exhibition and an essay.
series	other
email
last changed	2003/04/23 15:14

_id	1073
authors	Bruton, Dean
year	1997
title	A contingent sense of grammar
source	University of Adelaide
summary	Investigates the contingent senses in which concepts of grammars and grammatical design apply in the practice of form making in art and design. Using the strategies of a literature review; an examination through a perspective of grammatical design of some selected bodies of art work, including interviews with artists, theorists and some designers; and the reflective practice of image making with computer media in the author's own work as an artists.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	24f4
authors	Kaga, A., Comair, C. and Sasada, T.
year	1997
title	Collaborative Design System with Network Technologies
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 187-196
doi	https://doi.org/10.52842/conf.caadria.1997.187
summary	During the past ten years at the Sasada Lab of Osaka University has been using computer graphics for presentation, design review and design for practical architectural design projects. Our laboratory is interested in "collaborative design” with designers, clients and citizen. We discovered that there are two major problems, initiatives and timing, and have found new solutions using network technologies. This method have solved these problems, but we have found major problems in "collaborative design” that occur the during many practical architectural design projects. This paper presents these problems and some of the solutions and research that our group has accomplished, or is pursuing in the field of "collaborative design”, using some of the latest technologies in hyper-medium and networking. This paper presents the requirements for Collaborative Design System, the new technologies and the thought of system architecture, the prototype system in practical design project, and the evaluation of prototype system.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	63bb
authors	Kokosalakis, J., Brown, G. and Moorhouse, J.
year	1997
title	Incremental Reflective Learning and Innovative Practice in Electronic Design Media
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.u1q
summary	This paper discusses the impact of a continuously developing CAAD learning strategy, describing in detail a few of these principles, and considering their dynamic impact through deeper more lasting learning, feeding a substantial intensification in the application of Architectural Designing with Computers, changing design methods with interesting analytical and creative results.Aspects of the CAAD teaching discussed include extended collaboration between CAAD and design tutors in defining learning outcomes and tutoring the students’ application of CAAD to design projects, inclusion of CAAD within traditional interim reviews and feedback for design projects and bringing emphasis on conceptual principles, structuring the model and simple programming into earlier stages of the teaching programme and a simple excursion into programming. Studio project examples indicate the interplay between teaching, learning and achievement. Some evidence is explored in greater detail. from the "Interstitial Layers" project utilising the appropriateness of CAAD to store and switch the visibility of spatial data in endless permutations and extensive combinations for mapping, analysing and strategically projecting patterns of city centre activities, fabric and space. Students’ demonstrate a dynamic command of CAAD: as a vehicle for conceptual design, a device to analytically review, criticise and modify the design, as a means to explain design ideas to tutors and to develop and detail final building designs. Reciprocal valuing of quality CAAD achievement between architecture students and staff is seen to be contributing to involvement and motivation, reinforcing striving for equality of achievement. Reference to a further strand of the new methodology considers the impact of tutoring based in researcher findings from video case study precedents of architects practising creative design through use of computers, on a more open, effective development of the architecture students’ own designing processes, culminating in interesting design work.
keywords	Incremental Learning, Understanding, CAAD-Design Approaches, Retention, Feedback, Review, Urban Spatial Forms, Spatial Analysis, "Interstitial Layers", Patterns, Conceptual Electronic Designing, Creative Innovation, Equality and Sharing
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/kokosa/jmup01.htm
last changed	2022/06/07 07:50

_id	02c5
authors	Lin, Feng Tyan and Wang, Hung Hsiang
year	1997
title	A Case Study of Cooperative Design Using Video Conference
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 153-162
doi	https://doi.org/10.52842/conf.caadria.1997.153
summary	In this case study we observed an experimental cooperative design project: a parking lot design using a video conference system. Twelve graduate students of planning and design were divided into two teams for landscape design and traffic planning. They used ProShareTM, a computer-supported video conference system, to co-design at two separate rooms. We used video equipment to record this conference for a detailed analysis. Some experiences on using this system are described. The results indicate the relationships within the work organization, physical workplace and cooperative design. We argued that this workplace becomes more important, even though much research has put emphasis on the cyberspace in cooperative design. The team members’ tacit protocol has importance, but it does not guarantee any resolution of conflicts. This cooperative design is not only a social process, but also a logic of iterative verifications and falsifications. It is dangerous to construct a theory of computer-supported cooperative design simply based on this case study; however, such an observation could be the first step towards the theory.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	avocaad_2001_20
id	avocaad_2001_20
authors	Shen-Kai Tang
year	2001
title	Toward a procedure of computer simulation in the restoration of historical architecture
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	472d
authors	Burry, Mark and Murray, Zolna
year	1997
title	Architectural Design Based on Parametric Variation and Associative Geometry
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.h5q
summary	This paper considers the role of the computer for detailed design within the wider architectural design process. The central proposition is that parametric modelling software is invaluable for both preliminary and developed design where there is a need for the definition, manipulation and visualisation of complex geometry. The paper begins with a definition of 'parametric design' followed by a consideration of its potential to assist or hinder the designer. A worked example will demonstrate how the elements that make up a model can be referenced to each other using a number of clearly defined constraints, the completed model being changed, modified and regenerated while conforming to pre-set conditions. This will be followed by a report on research into the implications of parametric design modelling applied retrospectively to Jørn Utzon's documented design process for the Sydney Opera House. The study analyses how conventional modelling coped with the manipulation of these forms and compares this with the potential of computer-aided iterative design refinement.
keywords	Architectural Design, Geometry, Parametric Variation
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/burry/default.htm
last changed	2022/06/07 07:50

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
doi	https://doi.org/10.52842/conf.caadria.2010.443
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	acadia07_040
id	acadia07_040
authors	Hyde, Rory
year	2007
title	Punching Above Your Weight: Digital Design Methods and Organisational Change in Small Practice
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 40-47
doi	https://doi.org/10.52842/conf.acadia.2007.040
summary	Expanding bodies of knowledge imply expanding teams to manage this knowledge. Paradoxically, it can be shown that in situations of complexity—which increasingly characterise the production of architecture generally—the small practice or small team could be at an advantage. This is due to the increasingly digital nature of the work undertaken and artefacts produced by practices, enabling production processes to be augmented with digital toolsets and for tight project delivery networks to be forged with other collaborators and consultants (Frazer 2006). Furthermore, as Christensen argues, being small may also be desirable, as innovations are less likely to be developed by large, established companies (Christensen 1997). By working smarter, and managing the complexity of design and construction, not only can the small practice “punch above its weight” and compete with larger practices, this research suggests it is a more appropriate model for practice in the digital age. This paper demonstrates this through the implementation of emerging technologies and strategies including generative and parametric design, digital fabrication, and digital construction. These strategies have been employed on a number of built and un-built case-study projects in a unique collaboration between RMIT University’s SIAL lab and the award-winning design practice BKK Architects.
series	ACADIA
email
last changed	2022/06/07 07:50

_id	6f73
authors	Mahdavi, Ardeshir
year	1997
title	Modeling-Assisted Building Control
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 219-229
summary	The architectural research on provision of computational support for the building delivery process in general and computer aided performance modeling in particular has traditionally concentrated on the building design phase. This paper argues that computational modeling can also successfully apply to the building operation phase. To demonstrate this potential the paper explores a simulation- assisted building control strategy. Specifically, the use of generate-and-test as well as bi-directional inference methods is proposed to derive preferable control schemes and required attributes for control variables based on parametric and iterative simulation runs. The feasibility of the approach is demonstrated via illustrative computational examples from the thermal control domain.
series	CAAD Futures
email
last changed	2003/02/26 17:26

_id	b654
authors	Sacks, R. and Warszawski, A.
year	1997
title	A project model for an automated building system: design and planning phases
source	Automation in Construction 7 (1) (1997) pp. 21-34
summary	The purpose of an automated building system (ABS) is to automatically generate maximum information and the related documents for the preliminary design, detailed design and construction planning of a building project. The ABS under development, described in this paper, includes features such as: representation of project information by a tri-hierarchical project model, step-by-step progress through predefined design and construction planning stages, use of knowledge-based modules, linkage to various data bases, and implementation of intelligent parametric `templates' of building layouts and work assemblies. The main benefits of the system are the high quality of generated information, and the considerable saving of human input needed for this purpose. The project model for the system is described in the paper and various knowledge modules are defined with respect to their input and output. Interface screens and drawings from a prototypical testing of the system are also presented.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	75a8
authors	Achten, Henri H.
year	1997
title	Generic representations : an approach for modelling procedural and declarative knowledge of building types in architectural design
source	Eindhoven University of Technology
summary	The building type is a knowledge structure that is recognised as an important element in the architectural design process. For an architect, the type provides information about norms, layout, appearance, etc. of the kind of building that is being designed. Questions that seem unresolved about (computational) approaches to building types are the relationship between the many kinds of instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called ‘prototypes’) face problems clarifying these questions. The research work at hand proposes to investigate the role of knowledge associated with building types in the design process.Knowledge of the building type must be represented during the design process. Therefore, it is necessary to find a representation which supports design decisions, supports the changes and transformations of the design during the design process, encompasses knowledge of the design task, and which relates to the way architects design. It is proposed in the research work that graphic representations can be used as a medium to encode knowledge of the building type. This is possible if they consistently encode the things they represent; if their knowledge content can be derived, and if they are versatile enough to support a design process of a building belonging to a type.A graphic representation consists of graphic entities such as vertices, lines, planes, shapes, symbols, etc. Establishing a graphic representation implies making design decisions with respect to these entities. Therefore it is necessary to identify the elements of the graphic representation that play a role in decision making. An approach based on the concept of ‘graphic units’ is developed. A graphic unit is a particular set of graphic entities that has some constant meaning. Examples are: zone, circulation scheme, axial system, and contour. Each graphic unit implies a particular kind of design decision (e.g. functional areas, system of circulation, spatial organisation, and layout of the building). By differentiating between appearance and meaning, it is possible to define the graphic unit relatively shape-independent.If a number of graphic representations have the same graphic units, they deal with the same kind of design decisions. Graphic representations that have such a specifically defined knowledge content are called ‘generic representations.’ An analysis of over 220 graphic representations in the literature on architecture results in 24 graphic units and 50 generic representations. For each generic representation the design decisions are identified. These decisions are informed by the nature of the design task at hand. If the design task is a building belonging to a building type, then knowledge of the building type is required. In a single generic representation knowledge of norms, rules, and principles associated with the building type are used. Therefore, a single generic representation encodes declarative knowledge of the building type. A sequence of generic representations encodes a series of design decisions which are informed by the design task. If the design task is a building type, then procedural knowledge of the building type is used.By means of the graphic unit and generic representation, it is possible to identify a number of relations that determine sequences of generic representations. These relations are: additional graphic units, themes of generic representations, and successive graphic units. Additional graphic units defines subsequent generic representations by adding a new graphic unit. Themes of generic representations defines groups of generic representations that deal with the same kind of design decisions. Successive graphic units defines preconditions for subsequent or previous generic representations. On the basis of themes it is possible to define six general sequences of generic representations. On the basis of additional and successive graphic units it is possible to define sequences of generic representations in themes. On the basis of these sequences, one particular sequence of 23 generic representations is defined.The particular sequence of generic representations structures the decision process of a building type. In order to test this assertion, the particular sequence is applied to the office building type. For each generic representation, it is possible to establish a graphic representation that follows the definition of the graphic units and to apply the required statements from the office building knowledge base. The application results in a sequence of graphic representations that particularises an office building design.Implementation of seven generic representations in a computer aided design system demonstrates the use of generic representations for design support. The set is large enough to provide additional weight to the conclusion that generic representations map declarative and procedural knowledge of the building type.
series	thesis:PhD
email
more	http://alexandria.tue.nl/extra2/9703788.pdf
last changed	2003/11/21 15:15

_id	730e
authors	Af Klercker, Jonas
year	1997
title	Implementation of IT and CAD - what can Architect schools do?
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 83-92
summary	In Sweden representatives from the Construction industry have put forward a research and development program called: "IT-Bygg 2002 -Implementation". It aims at making IT the vehicle for decreasing the building costs and at the same time getting better quality and efficiency out of the industry. A seminar was held with some of the most experienced researchers, developers and practitioners of CAD in construction in Sweden. The activities were recorded and annotated, analysed and put together afterwards; then presented to the participants to agree on. Co-operation is the key to get to the goals - IT and CAD are just the means to improve it. Co-operation in a phase of implementation is enough problematic without the technical difficulties in using computer programs created by the computer industry primarily for commercial reasons. The suggestion is that cooperation between software companies within Sweden will make a greater market to share than the sum of all individual efforts. In the short term, 2 - 5 years, implementation of CAD and IT will demand a large amount of educational efforts from all actors in the construction process. In the process of today the architect is looked upon as a natural coordinator of the design phase. In the integrated process the architect's methods and knowledge are central and must be spread to other categories of actors - what a challenge! At least in Sweden the number of researchers and educators in CAAD is easily counted. How do we make the most of it?
series	AVOCAAD
last changed	2005/09/09 10:48

_id	2dc0
authors	Arkin, H. and Paciuk, M.
year	1997
title	Evaluating intelligent buildings according to level of service systems integration
source	Automation in Construction 6 (5-6) (1997) pp. 471-479
summary	The intelligent building is supposed to provide the environment and means for an optimal utilization of the building, according to its designation. This extended function of a building can be achieved only by means of an extensive use of building service systems, such as HVAC; electric power; communication; safety and security; transportation; sanitation, etc. Building intelligence is not related to the sophistication of service systems in a building, but rather to the integration among the various service systems, and between the systems and the building structure. Systems' integration can be accomplished through teamwork planning of the building, starting at the initial design stages of the building. This paper examines some existing buildings claimed to be "intelligent", according to their level of systems' integration.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	8ec9
authors	Asanowicz, Alexander
year	1997
title	Incompatible Pencil - Chance for Changing in Design Process
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 93-101
summary	The existing Caad systems limit designers creativity by constraining them to work with prototypes provided by the system's knowledge base. Most think of computers as drafting machines and consider CAAD models as merely proposals for future buildings. But this kind of thinking (computers as simple drafting machines) seems to be a way without future. New media demands new process and new process demands new media. We have to give some thougt to impact of CAAD on the design process and in which part of it CAAD can add new value. In this paper there will be considered two ways of using of computers. First - creation of architectural form in an architect's mind and projects visualisation with using renderings, animation and virtual reality. In the second part - computer techniques are investigated as a medium of creation. Unlike a conventional drawing the design object within computer has a life of its own. In computer space design and the final product are one. Computer creates environments for new kind of design activities. In fact, many dimensions of meaning in cyberspace have led to a cyberreal architecture that is sure to have dramatic consequences for the profession.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	411c
authors	Ataman, Osman and Bermúdez (Ed.)
year	1999
title	Media and Design Process [Conference Proceedings]
source	ACADIA ‘99 Proceedings / ISBN 1-880250-08-X / Salt Lake City 29-31 October 1999, 353 p.
doi	https://doi.org/10.52842/conf.acadia.1999
summary	Throughout known architectural history, representation, media and design have been recognized to have a close relationship. This relationship is inseparable; representation being a means for engaging in design thinking and making and this activity requiring media. Interpretations as to what exactly this relationship is or means have been subject to debate, disagreement and change along the ages. Whereas much has been said about the interactions between representation and design, little has been elaborated on the relationship between media and design. Perhaps, it is not until now, surrounded by all kinds of media at the turn of the millennium, as Johnson argues (1997), that we have enough context to be able to see and address the relationship between media and human activities with some degree of perspective.
series	ACADIA
email
more	http://www.acadia.org
last changed	2022/06/07 07:49

For more results click below: