Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 430

Reformat results as: short short into frame detailed detailed into frame

_id	dfaf
authors	Ataman, Osman
year	2000
title	Some Experimental Results in the Assessment of Architectural Media
doi	https://doi.org/10.52842/conf.acadia.2000.163
source	Eternity, Infinity and Virtuality in Architecture [Proceedings of the 22nd Annual Conference of the Association for Computer-Aided Design in Architecture / 1-880250-09-8] Washington D.C. 19-22 October 2000, pp. 163-171
summary	The relationship between the media and architectural design can be an important factor and can influence the design outcome. However, the nature, direction and magnitude of this relationship are unknown. Consequently, there have been many speculative claims about this relationship and almost none of them are supported with empirical research studies. In order to investigate these claims and to provide a testable framework for their potential contributions to architectural education, this study aims to explore the effects of media on architectural design. During 1995-1997, a total of 90 students enrolling in First Year Design Studio and Introduction to Computing classes at Georgia Tech participated in the study. A set of quantitative measures was developed to assess the differences between the two media and the effects on the architectural design. The results suggested that media influenced certain aspects of students’ designs. It is concluded that there is a strong relationship between the media and architectural design. The type of media not only changes some quantifiable design parameters but also affects the quality of design.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	c14d
authors	Silva, Neander
year	1997
title	Artificial Intelligence and 3D Modelling Exploration: An Integrated Digital Design Studio
doi	https://doi.org/10.52842/conf.ecaade.1997.x.l5p
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper describes a CAAD teaching strategy in which some Artificial Intelligence techniques are integrated with 3D modelling exploration. The main objective is to lead the students towards "repertoire" acquisition and creative exploration of design alternatives. This strategy is based on dialogue emulation, graphic precedent libraries, and 3D modelling as a medium of design study. The course syllabus is developed in two parts: a first stage in which the students interact with an intelligent interface that emulates a dialogue. This interface produces advice composed of either precedents or possible new solutions. Textual descriptions of precedents are coupled with graphical illustrations and textual descriptions of possible new solutions are coupled with sets of 3D components. The second and final stage of the course is based on 3D modelling, not simply as a means of presentation, but as a design study medium. The students are then encouraged to get the system’s output from the first stage of the course and explore it graphically. This is done through an environment in which modelling in 3D is straightforward allowing the focus to be placed on design exploration rather than simply on design presentation. The students go back to the first stage for further advice depending on the results achieved in the second stage. This cycle is repeated until the design solution receives a satisfactory assessment.
keywords	Education, Design Process, Interfaces, Neural Networks, 3D Modelling
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/silva/silva.htm
last changed	2022/06/07 07:50

_id	58f4
authors	Barequet, G. and Kumar, S.
year	1997
title	Repairing CAD models
source	Proceedings of IEEE Visualizationí97, pp. 363-370
summary	We describe an algorithm for repairing polyhedral CAD models that have errors in their B-REP. Errors like cracks, degeneracies, duplication, holes and overlaps are usually introduced in solid models due to imprecise arithmetic, model transformations, designer's fault, programming bugs, etc. Such errors often hamper further processing like finite element analysis, radiosity computation and rapid prototyping. Our fault-repair algorithm converts an unordered collection of polygons to a shared-vertex representation to help eliminate errors. This is done by choosing, for each polygon edge, the most appropriate edge to unify it with. The two edges are then geometrically merged into one, by moving vertices. At the end of this process, each polygon edge is either coincident with another or is a boundary edge for a polygonal hole or a dangling wall and may be appropriately repaired. Finally, in order to allow user- inspection of the automatic corrections, we produce a visualization of the repair and let the user mark the corrections that conflict with the original design intent. A second iteration of the correction algorithm then produces a repair that is commensurate with the intent. Thus, by involving the users in a feedback loop, we are able to refine the correction to their satisfaction.
series	other
email
last changed	2003/04/23 15:14

_id	caadria2010_042
id	caadria2010_042
authors	Celento, David
year	2010
title	Open-source, parametric architecture to propagate hyper-dense, sustainable urban communities: parametric urban dwellings for the experience economy
doi	https://doi.org/10.52842/conf.caadria.2010.443
source	Proceedings of the 15th International Conference on Computer Aided Architectural Design Research in Asia / Hong Kong 7-10 April 2010, pp. 443-452
summary	Rapid developments in societal, technological, and natural systems suggest profound changes ahead if research in panarchical systems (Holling, 2001) is to be believed. Panarchy suggests that systems, both natural and man-made, rise to the point of vulnerability then fail due to disruptive forces in a process of ‘creative destruction.’ This sequence allows for radical, and often unpredictable, renewal. Pressing sustainability concerns, burgeoning urban growth, and emergent ‘green manufacturing’ laws, suggest that future urban dwellings are headed toward Gladwell’s ‘tipping point’ (2002). Hyper-dense, sustainable, urban communities that employ open-source standards, parametric software, and web-based configurators are the new frontier for venerable visions. Open-source standards will permit the design, manufacture, and sale of highly diverse, inter-operable components to create compact urban living environments that are technologically sophisticated, sustainable, and mobile. These mass-customised dwellings, akin to branded consumer goods, will address previous shortcomings for prefabricated, mobile dwellings by stimulating consumer desire in ways that extend the arguments of both Joseph Pine (1992) and Anna Klingman (2007). Arguments presented by authors Makimoto and Manners (1997) – which assert that the adoption of digital and mobile technologies will create large-scale societal shifts – will be extended with several solutions proposed.
keywords	Mass customisation; urban dwellings; open source standards; parametric design; sustainability
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	b8a4
authors	Dani, Tushar H and Gadh, Rajit
year	1997
title	Creation of concept shape designs via a virtual reality interface
source	Computer-Aided Design, Vol. 29 (8) (1997) pp. 555-563
summary	This paper describes an approach for creating concept shape designs in a virtual reality environment--COVIRDS (COnceptual VIRtual Design System. Conceptdesign refers to the ab initio design of a product or part. In concept design, the product details such as shape features and exact dimensions are not rigidly definedand the designer has some freedom in determining the shape and dimensions of the product. Current CAD require the designer to specify shape and dimensions tocreate CAD models of products even though these are probably not necessary at the concept development stage. COVIRDS overcomes these drawbacks by providing abi-modal voice and hand-tracking based user interface to the VR-based CAD modeling environment. This interface allows rapid concept design creation withoutrequiring time consuming shape description and the tedious specifications of exact dimensions.
keywords	Concept Shape Design, Virtual Reality Interfaces, Geometric Modeling
series	journal paper
last changed	2003/05/15 21:33

_id	6112
authors	Daru, Roel and Snijder, H.P.S.
year	1997
title	GACAAD or AVOCAAD? CAAD and Genetic Algorithms for an Evolutionary Design Paradigm
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 145-161
summary	One of the dominant paradigms in architecture is about its creation: it is done by human designers supported by tools like sketching, drawing or modelling and evaluation tools. The Darwinistic paradigm demands a paradigmatic switch from drawing, modelling and evaluation to the breeding of forms with a much more integrated generation and selecting process embedded in the computer machinery. This means a paradigm switch from a designer as the performer of (sketch, draw or modelling) work to a machine driven creation and selection process of forms with the designer as the supervisor, fully entitled to steer the process in some preferred directions. The designer creates by establishing the evolutionary rules and making choices among the architectural creatures emerging in rapid fire modethrough the synthesis performed by the machine. Natural selection is a Metaphor: in fact the designer plays Nature (or God). The creatures allowed to flourish are not adequate according to laws of Nature, but to the judgement of the designer (or to the designing team).
series	AVOCAAD
last changed	2005/09/09 10:48

_id	389b
authors	Do, Ellen Yi-Luen
year	2000
title	Sketch that Scene for Me: Creating Virtual Worlds by Freehand Drawing
doi	https://doi.org/10.52842/conf.ecaade.2000.265
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 265-268
summary	With the Web people can now view virtual threedimensional worlds and explore virtual space. Increasingly, novice users are interested in creating 3D Web sites. Virtual Reality Modeling Language gained ISO status in 1997, although it is being supplanted by the compatible Java3D API and alternative 3D Web technologies compete. Viewing VRML scenes is relatively straightforward on most hardware platforms and browsers, but currently there are only two ways to create 3D virtual scenes: One is to code the scene directly using VRML. The other is to use existing CAD and modeling software, and save the world in VRML format or convert to VRML from some other format. Both methods are time consuming, cumbersome, and have steep learning curves. Pen-based user interfaces, on the other hand, are for many an easy and intuitive method for graphics input. Not only are people familiar with the look and feel of paper and pencil, novice users also find it less intimidating to draw what they want, where they want it instead of using a complicated tool palette and pull-down menus. Architects and designers use sketches as a primary tool to generate design ideas and to explore alternatives, and numerous computer-based interfaces have played on the concept of "sketch". However, we restrict the notion of sketch to freehand drawing, which we believe helps people to think, to envision, and to recognize properties of the objects with which they are working. SKETCH employs a pen interface to create three-dimensional models, but it uses a simple language of gestures to control a three-dimensional modeler; it does not attempt to interpret freehand drawings. In contrast, our support of 3D world creation using freehand drawing depend on users’ traditional understanding of a floor plan representation. Igarashi et al. used a pen interface to drive browsing in a 3D world, by projecting the user’s marks on the ground plane in the virtual world. Our Sketch-3D project extends this approach, investigating an interface that allows direct interpretation of the drawing marks (what you draw is what you get) and serves as a rapid prototyping tool for creating 3D virtual scenes.
keywords	Freehand Sketching, Pen-Based User Interface, Interaction, VRML, Navigation
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	e373
authors	Johnson, Robert E. and Clayton, Mark
year	1997
title	The Impact of Information Technology in Design and Construction: The Owner's Perspective
doi	https://doi.org/10.52842/conf.acadia.1997.229
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 229-241
summary	This paper reports on findings of a November 1996 exploratory survey of architecture-engineering clients (Fortune 500 corporate facility managers). This research investigated how the practices of corporate facility managers are being influenced by rapid changes in information technology. The conceptual model that served as a guide for this research hypothesized that information technology acts as both an enabler (that is, information technology provides an effective mechanism for managers to implement desired changes) as well as a source of innovation (that is, new information technology innovations create new facility management opportunities). The underlying assumption of this research is that information technology is evolving from a tool that incrementally improves "back-office" productivity to an essential component of strategic positioning that may alter the basic economics, organizational structure and operational practices of facility management organizations and their interactions with service providers (architects, engineers and constructors). The paper concludes with a discussion of researchable issues.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	51c2
authors	Melling, G., Bradley, D.A., McKee, H. and Widden, M.B.
year	1997
title	The development of a rapid-prototyping technique for mechatronic-augmented heavy plant
source	Automation in Construction 5 (5) (1997) pp. 365-378
summary	Telechiric, semi-autonomous and autonomous heavy plant is finding an increasing role in applications such as construction, sub-sea work and decommissioning. There is a need for improved operator interfaces for such plant, and hence for rapid-prototyping tools which link the development of the operator interface with control and operational strategies and with machine geometries.The paper sets out a strategy by which different operator interfaces can be readily evaluated while at the same time generating the requisite information structure for the control of real items of plant. The proposed system is based on the use of interconnected PCs, one to simulate the operator interface and another to provide a kinematic representation of the machine using an appropriate "desk-top reality" environment. This system offers a safe, practical, rapid and cost-effective means of assessing proposed operator interfaces, as well as facilitating the development of machine kinematic structures and the associated operational and control strategies.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	14e6
authors	Pegna, J.
year	1997
title	Exploratory investigation of solid freeform construction
source	Automation in Construction 5 (5) (1997) pp. 427-437
summary	A radical departure from generally accepted concepts in construction robotics is proposed in this paper. A new process derived from the emerging field of additive manufacturing processes is investigated for its potential effectiveness in construction automation. In essence, complex assemblies of large construction components are substituted with a large number of elemental component assemblies. The massive complexity of information processing required in construction is replaced with a large number of simple elemental operations which lend themselves easily to computer control. This exploratory work is illustrated with sample masonry structures that cannot be obtained by casting. They are manufactured by an incremental deposition of sand and Portland cement akin to Navajo sand painting. A thin layer of sand is deposited, followed by the deposition of a patterned layer of cement. Steam is then applied to the layer to obtain rapid curing. A characterization of the resulting material properties shows rather novel anisotropic properties for mortar. Finally, the potential of this approach for solid freeform fabrication of large structures is assessed.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	9c32
authors	Sariyildiz, Sevil and Schwenk, Mathias
year	1997
title	Tools of an Integrated Software Environment for the Architectural Design Process - Concepts, Technologies and Added Value
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 313-328
summary	The technological developments in every field of science have an influence on the society and therefore on the design and design process itself. We are forced by the rapid developments in the field of ICT (Information and Communication Technology) to think fundamentally about changes in existing design process as consequence of the influence of this new technology. What will be the way and the method to integrate the new tools in a design process to increase its efficiency and to reach better design results? In this paper we will focus on the three main aspects of using computer tools in an architectural design process. By means of examples we will illustrate our vision concerning the future tools for design developments and their integration into integrated design support systems. We will provide a survey of related problems of the design process and deal with aspects of related disciplines that have to be integrated into the design process.
keywords	ICT design Tools, Architectural Design, Materialisation, Tool Integration, Integrated Design Support Systems
series	AVOCAAD
last changed	2005/09/09 10:48

_id	4b7c
authors	Schumacher, Peter and Radford, Antony
year	1997
title	Games in Virtual Blockland
doi	https://doi.org/10.52842/conf.caadria.1997.277
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 277-286
summary	The paper discusses with an example the educational potential and limitations of students using a CAD system as an immersive environment for the rapid exploration of design compositions through play with a small vocabulary of blocks.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	6629
authors	Torrance, V.
year	1997
title	Building process summary
source	Automation in Construction 6 (1) (1997) pp. 11-16
summary	There is a lack of research in the UK construction industry. New technologies, particularly communications, are producing rapid change and, if the UK does not exploit this, it will be at the mercy of other countries which do. There is a lack of understanding of the decision making process which inhibits simulation. Clients are likely to exert more influence in future, particularly in building management where 50% of construction workload is on maintenance and repair. Electronic building maintenance manuals are needed. IT suppliers may become more involved and even buy into construction design firms in future. Education is vital to keep the industry at the forefront of IT development and new IT distance learning techniques could help.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	2342
authors	Chiu, Mao-Lin and Shih, Shen-Guan
year	1997
title	Analogical Reasoning and Case Adaptation in Architectural Design: Computers Vs. Human Designers
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 787-800
summary	This paper depicts the studies of the differences between human designers and computers in analogical reasoning and case adaptation. Four design experiments are undertaken to examine how designers conduct case-based design, apply dimensional and topological adaptation. The paper also examines the differences of case adaptation by novice and experienced designers, and between human judgement in case adaptation and the evaluation mechanism by providing similarity assessment. In conclusion, this study provides the comparative analysis from the above observation and implications on the development of case-based reasoning systems for designers.
keywords	Case-based Reasoning, Analogical Reasoning, Case Adaptation, Computer-Aided Architectural Design
series	CAAD Futures
email
last changed	2003/05/16 20:58

_id	4a30
authors	Chiu, Mao-Lin
year	1997
title	Analogical Reasoning in Architectural Design: Comparison of Human Designers and Computers in Case Adaptation
doi	https://doi.org/10.52842/conf.caadria.1997.205
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 205-215
summary	Design cases were considered as the design solution or condensed knowledge of design experience. In the analogical reasoning process, case adaptation is the fundamental task for solving the problem. This paper is aimed to study the difference between human designers and computers in case adaptation. Two design experiments are undertaken for examining how designers apply dimensional and topological adaptation, exploring the difference of case adaptation by novice and experienced designers, and examining the difference between human judgement in case adaptation and the evaluation mechanism by providing similarity assessment. In conclusion, this study provides the comparative analysis from the above observation and implications on the development of case-based reasoning systems for designers.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	6594
authors	Emdanat, Samir S and Vakalo, Emmanuel G.
year	1997
title	SHAPE GRAMMARS: AN ASSESSMENT OF THEIR UTILITY IN ARCHITECTURE
doi	https://doi.org/10.52842/conf.caadria.1997.313
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 313-321
summary	Shape grammars are generative formalisms that allow spatial computations to be carried out on shapes. This paper examines the assumptions, methodologies, and formalisms underlying shape grammar research in relation to architectural form and its making. The paper first establishes the criteria for evaluating the adequacy of a given generative system. Then, it applies them to the evaluation of the shape grammar formalism. Issues of the representation of style and language, procedural and declarative knowledge representation, as well as, the specificity and generalizability of the formalism will be addressed. The paper argues that, in its present state, shape grammar leaves a great deal to be desired in terms of its descriptive power and generalizability. The paper concludes by exploring some of the desired characteristics for languages of architectural form.
series	CAADRIA
type	normal paper
last changed	2022/06/07 07:55

_id	2653
authors	Kohler, N., Barth, B. Heitz, S. and Hermann, M.
year	1997
title	Life Cycle Models of Buildings - A New Approach
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 519-531
summary	The idea of life cycle cost was developed a quarter of a century ago. A wide dissemination of the term was given through a report for the US Secretary of Defense "Life Cycle Cost in Equipment Procuration". This report was followed by a series of guide lines in the defense field and later on in other government activities. The basic definition of life cycle costs is: "The sum of all costs incurred during the lifetime of an item, i.e. the total of procurement and ownership costs". There are several life cycle costs models available in literature. In the building field attempts have been made to introduce the notion of life cycle costs mainly through building surveys and for public owned buildings. Recorded data of construction, refurbishment and maintenance costs of buildings show that over a 50 year period the total costs amount to approximate twice the investment costs (without financial costs).
keywords	Life Cycle Costs, Life Cycle Impact Assessment, Product Models
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	ddss9837
id	ddss9837
authors	Liu, Yu-Tung and Bai, Rui-Yuan
year	1998
title	The roles of virtual reality, image processing, and multimedia in thedesign of public spaces: 1997 Hsinchu Project
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper examines the procedure of visual impact analysis and assessment proposed by Rahman and reviews the use of CAD applications in urban projects in the real world. A preliminary computerized procedure for visual impact analysis and assessment is proposed. An experiments wasconducted in our laboratory to verify the preliminary procedure. In order to further study the revised procedure in real urban projects, it was also applied into the renew project of The Eastern Gate Plaza located in the center of city Hsinchu, Taiwan from 1996 to 1998. According to several face-to-face discussions with Hsinchu habitants, government officials, and professional designers, a final computerized procedure for visual impact analysis and assessment is concluded.
series	DDSS
last changed	2003/08/07 16:36

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

For more results click below: