Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 512

Reformat results as: short short into frame detailed detailed into frame

_id	53ad
authors	Huang, Jeffrey
year	1997
title	Interorganizational Systems in Design
source	Harvard University, Graduate School of Design
summary	This thesis employs recent developments in coordination theory to analyze and map the coordination processes among participating firms in building design. The process model enables an understanding of the activities and dependencies in the collaborative design process, based on which potential implications of Interorganizational Information Systems (IOS), such as concurrent design platforms, vertical information links and electronic marketplaces, can be understood and critically assessed. Part One defines the parameters of the research, and contrasts the implementation of IOS in the aerospace, automobile and consulting industry to the state of practice in the building design industry. From the comparison, the need for fundamentally rethinking and redesigning the building design process is derived. Part Two describes how this can be accomplished by making the coordination processes in building design explicit. The building design process is decomposed into its core activities and dependencies, and new ways of recomposing the processes are identified which use alternative coordination mechanisms facilitated by IOS. Part Three describes the implications of the process model. Suggestions for appropriate IOS are made, and evidence of IOS applications in design is given in the analysis of four field studies, and in an example redesign of a design process.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	536e
authors	Bouman, Ole
year	1997
title	RealSpace in QuickTimes: architecture and digitization
source	Rotterdam: Nai Publishers
summary	Time and space, drastically compressed by the computer, have become interchangeable. Time is compressed in that once everything has been reduced to 'bits' of information, it becomes simultaneously accessible. Space is compressed in that once everything has been reduced to 'bits' of information, it can be conveyed from A to B with the speed of light. As a result of digitization, everything is in the here and now. Before very long, the whole world will be on disk. Salvation is but a modem away. The digitization process is often seen in terms of (information) technology. That is to say, one hears a lot of talk about the digital media, about computer hardware, about the modem, mobile phone, dictaphone, remote control, buzzer, data glove and the cable or satellite links in between. Besides, our heads are spinning from the progress made in the field of software, in which multimedia applications, with their integration of text, image and sound, especially attract our attention. But digitization is not just a question of technology, it also involves a cultural reorganization. The question is not just what the cultural implications of digitization will be, but also why our culture should give rise to digitization in the first place. Culture is not simply a function of technology; the reverse is surely also true. Anyone who thinks about cultural implications, is interested in the effects of the computer. And indeed, those effects are overwhelming, providing enough material for endless speculation. The digital paradigm will entail a new image of humankind and a further dilution of the notion of social perfectibility; it will create new notions of time and space, a new concept of cause and effect and of hierarchy, a different sort of public sphere, a new view of matter, and so on. In the process it will indubitably alter our environment. Offices, shopping centres, dockyards, schools, hospitals, prisons, cultural institutions, even the private domain of the home: all the familiar design types will be up for review. Fascinated, we watch how the new wave accelerates the process of social change. The most popular sport nowadays is 'surfing' - because everyone is keen to display their grasp of dirty realism. But there is another way of looking at it: under what sort of circumstances is the process of digitization actually taking place? What conditions do we provide that enable technology to exert the influence it does? This is a perspective that leaves room for individual and collective responsibility. Technology is not some inevitable process sweeping history along in a dynamics of its own. Rather, it is the result of choices we ourselves make and these choices can be debated in a way that is rarely done at present: digitization thanks to or in spite of human culture, that is the question. In addition to the distinction between culture as the cause or the effect of digitization, there are a number of other distinctions that are accentuated by the computer. The best known and most widely reported is the generation gap. It is certainly stretching things a bit to write off everybody over the age of 35, as sometimes happens, but there is no getting around the fact that for a large group of people digitization simply does not exist. Anyone who has been in the bit business for a few years can't help noticing that mum and dad are living in a different place altogether. (But they, at least, still have a sense of place!) In addition to this, it is gradually becoming clear that the age-old distinction between market and individual interests are still relevant in the digital era. On the one hand, the advance of cybernetics is determined by the laws of the marketplace which this capital-intensive industry must satisfy. Increased efficiency, labour productivity and cost-effectiveness play a leading role. The consumer market is chiefly interested in what is 'marketable': info- and edutainment. On the other hand, an increasing number of people are not prepared to wait for what the market has to offer them. They set to work on their own, appropriate networks and software programs, create their own domains in cyberspace, domains that are free from the principle whereby the computer simply reproduces the old world, only faster and better. Here it is possible to create a different world, one that has never existed before. One, in which the Other finds a place. The computer works out a new paradigm for these creative spirits. In all these distinctions, architecture plays a key role. Owing to its many-sidedness, it excludes nothing and no one in advance. It is faced with the prospect of historic changes yet it has also created the preconditions for a digital culture. It is geared to the future, but has had plenty of experience with eternity. Owing to its status as the most expensive of arts, it is bound hand and foot to the laws of the marketplace. Yet it retains its capacity to provide scope for creativity and innovation, a margin of action that is free from standardization and regulation. The aim of RealSpace in QuickTimes is to show that the discipline of designing buildings, cities and landscapes is not only a exemplary illustration of the digital era but that it also provides scope for both collective and individual activity. It is not just architecture's charter that has been changed by the computer, but also its mandate. RealSpace in QuickTimes consists of an exhibition and an essay.
series	other
email
last changed	2003/04/23 15:14

_id	e292
authors	Charitos, D. and Bridges, A.H.
year	1997
title	On Architectural Design of Virtual Environments
source	Design Studies, Vol.18, No. 2, 143-154
summary	This paper considers the domains of architectural design and film theory for the purpose of informing the design of virtual environments (VEs). It is suggested that these domains may form a background for the consideration of possible metaphors for the design of VEs. Firstly, the paper investigates the relation between architecture and virtual reality technology, through the nature of drawings and virtual environments as means of representing three-dimensional spaces. Then, differences between VEs and physical environments (PEs) are identified for the purpose of understanding the intrinsic nature of VEs, by comparing them to our familiar everyday spatial experience. This step is considered essential in helping us understand how we might be able to develop an architectural conception of designing spaces, in the context of VEs. The paper then presents two directions towards informing VE design by means of theoretical and practical architectural design knowledge. Finally, the use of film-related studies is considered as a means of enhancing our conception of time and movement in VEs.
series	journal paper
email
last changed	2003/04/23 15:50

_id	27
authors	De Gregorio, R., Carmena, S., Morelli, R.D., AvendaÒo, C. and Lioi, C.
year	1998
title	La Construccion del Espacio del Poder. Museo de la Casa Rosada (The Construction of the Space of Power. Museum of the "Casa Rosada" (Argentinean Presidential House))
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 212-217
summary	The present work is part of the exposition "Francesco Tamburini, La ConstrucciÛn del Espacio del Poder I", exhibited in Rivadavia Cultural Center ( Rosario city), and in Casa Rosada Museum during 1997. The Exposition is based on an investigation program of the space that involves Casa Rosada, determining this space as the first piece of its collection. In 1995, when a group of argentines where visiting the picture gallery Pianetti (Jesi, Italy) there have been found some watercolours of Francesco Tamburini (1846-1890), planner of the main faÁades of the Government and author of many works. These watercolours have great value for architecture, and unknown by public, they have been the starting point of the Exposition. Among these argentines was Roberto De Gregorio architect, historian teacher of this school of architecture, and in charge of the historical investigation. C.I.A.D.'s specific work consists in converting in digital data Casa Rosada's faÁades. The two first stages, already completed, finished on the digital data conversion of facades, in front of Plaza de Mayo and Rivadavia street, with presidential access esplanade. Actually the work is centred on the two facades left and on the elaboration of an electronic model for the edition of a CD-ROM containing the information of the exposition.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	2489
authors	DeLaura, Louis P.
year	1997
title	Old Wine in New Wine Skins: Architecture, Representation and Electronic Media
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 73-82
doi	https://doi.org/10.52842/conf.acadia.1997.073
summary	Architectural computing too often is disengaged from the central culture of architectural discourse and traditional means of making. This paper proposes that one way to bridge this gap is to introduce electronic media in the context of a process-oriented theory of architectural representation - one that is principally concerned with issues of conception, intention, and perception. This approach to the use of computers in the design process requires the introduction of a morphology of representational modes that are intrinsic to the Architect and his musings, and proposes a pedagogical emphasis on electronic media's ability to perform in conjunction with the design intentions of these various representational forms.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	acadia18_226
id	acadia18_226
authors	Glynn, Ruairi; Abramovic, Vasilija; Overvelde, Johannes T. B.
year	2018
title	Edge of Chaos. Towards intelligent architecture through distributed control systems based on Cellular Automata.
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 226-231
doi	https://doi.org/10.52842/conf.acadia.2018.226
summary	From the “Edge of Chaos”, a mathematical space discovered by computer scientist Christopher Langton (1997), compelling behaviors originate that exhibit both degrees of organization and instability creating a continuous dance between order and chaos. This paper presents a project intended to make this complex theory tangible through an interactive installation based on metamaterial research which demonstrates emergent behavior using Cellular Automata (CA) techniques, illustrated through sound, light and motion. We present a multi-sensory narrative approach that encourages playful exploration and contemplation on perhaps the biggest questions of how life could emerge from the disorder of the universe. We argue a way of creating intelligent architecture, not through classical Artificial Intelligence (AI), but rather through Artificial Life (ALife), embracing the aesthetic emergent possibilities that can spontaneously arise from this approach. In order to make these ideas of emergent life more tangible we present this paper in four integrated parts, namely: narrative, material, hardware and computation. The Edge of Chaos installation is an explicit realization of creating emergent systems and translating them into an architectural design. Our results demonstrate the effectiveness of a custom CA for maximizing aesthetic impact while minimizing the live time of architectural kinetic elements.
keywords	work in progress, complexity, responsive architecture, distributed computing, emergence, installation, interactive architecture, cellular automata
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	498a
authors	Mahdavi, Ardeshir
year	1997
title	A Negentropic View of Computational Modeling
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 107-121
doi	https://doi.org/10.52842/conf.caadria.1997.107
summary	I propose a systemic view of computational modeling in architecture that is inspired by concepts in human ecology, information theory and thermodynamics.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ddss9842
id	ddss9842
authors	Mattsson, Helena
year	1998
title	Working with unpredictability
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper deals with notions of complexity in art and architecture. On the basis of a recent sculptural work by Richard Serra, Torqued Ellipses (1997), the notion of complexity is investigated in terms of how it situates the viewer, and affects our sense of space and time. Serra’s work is analyzed in terms of the artist’s working method, the production of the work, and finally the ”external relations” which connect it to the viewer and the context. In each of these steps, the notions of complexity and unpredictability are shown to have a formative role. The relations between space and time, object and context, are redefined in Serra’s work, which also gives it great importance for architectural theory and practice.
series	DDSS
last changed	2003/08/07 16:36

_id	03d0
authors	Neiman, Bennett and Bermudez, Julio
year	1997
title	Between Digital & Analog Civilizations: The Spatial Manipulation Media Workshop
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 131-137
doi	https://doi.org/10.52842/conf.acadia.1997.131
summary	As the power shift from material culture to media culture accelerates, architecture finds itself in the midst of a clash between centuries-old analog design methods (such as tracing paper, vellum, graphite, ink, chipboard, clay, balsa wood, plastic, metal, etc.) and the new digital systems of production (such as scanning, video capture, image manipulation, visualization, solid modeling, computer aided drafting, animation, rendering, etc.). Moving forward requires a realization that a material interpretation of architecture proves limiting at a time when information and media environments are the major drivers of culture. It means to pro-actively incorporate the emerging digital world into our traditional analog work. It means to change. This paper presents the results of an intense design workshop that looks, probes, and builds at the very interface that is provoking the cultural and professional shifts. Media space is presented and used as an interpretive playground for design experimentation in which the poetics of representation (and not its technicalities) are the driving force to generate architectural ideas. The work discussed was originally developed as a starting exercise for a digital design course. The exercise was later conducted as a workshop at two schools of architecture by different faculty working in collaboration with it's inventor. The workshop is an effective sketch problem that gives students an immediate start into a non-traditional, hands-on, and integrated use of contemporary media in the design process. In doing so, it establishes a procedural foundation for a design studio dealing with digital media.
series	ACADIA
email
last changed	2022/06/07 07:58

_id	diss_ruhl
id	diss_ruhl
authors	Ruhl, Volker R.
year	1997
title	Computer-Aided Design and Manufacturing of Complex Shaped Concrete Formwork
source	Doctor of Design Thesis, Graduate School of Design, Harvard University, Cambridge, MA
summary	The research presented in this thesis challenges the appropriateness of existing, conventional forming practices in the building construction industry--both in situ or in prefabrication--for building concrete "freeforms," as they are characterized by impracticality and limitations in achieved geometric/formal quality. The author's theory proposes the application of alternative, non-traditional construction methods derived from the integration of information technology, in the form of Computer-Aided Design (CAD), Engineering (CAE) and Manufacturing (CAM), into the concrete tooling and placing process. This concept relies on a descriptive shape model of a physically non-existent building element which serves as a central database containing all the geometric data necessary to completely and accurately inform design development activities as well as the construction process. For this purpose, the thesis orients itself on existing, functioning models in manufacturing engineering and explores the broad spectrum of computer-aided manufacturing techniques applied in this industry. A two-phase, combined method study is applied to support the theory. Part I introduces the phenomenon of "complexity" in the architectural field, defines the goal of the thesis research and gives examples of complex shape. It also presents the two analyzed technologies: concrete tooling and automation technology. For both, it establishes terminology, classifications, gives insight into the state-of-the-art, and describes limitations. For concrete tooling it develops a set of quality criteria. Part II develops a theory in the form of a series of proposed "non-traditional" forming processes and concepts that are derived through a synthesis of state-of-the-art automation with current concrete forming and placing techniques, and describes them in varying depth, in both text and graphics, on the basis of their geometric versatility and their appropriateness for the proposed task. Emphasis is given to the newly emerging and most promising Solid Freeform Fabrication processes, and within this area, to laser-curing technology. The feasibility of using computer-aided formwork design, and computer-aided formwork fabrication in today's standard building practices is evaluated for this particular technology on the basis of case-studies. Performance in the categories of process, material, product, lead time and economy is analyzed over the complete tooling cycle and is compared to the performance of existing, conventional forming systems for steel, wood, plywood veneer and glassfiber reinforced plastic; value s added to the construction process and/or to the formwork product through information technology are pointed out and become part of the evaluation. For this purpose, an analytical framework was developed for testing the performance of various Solid Freeform Fabrication processes as well as the "sensitivity," or the impact of various influencing processes and/or product parameters on lead time and economy. This tool allows us to make various suggestions for optimization as well as to formulate recommendations and guidelines for the implementation of this technology. The primary objective of this research is to offer architects and engineers unprecedented independence from planar, orthogonal building geometry, in the realization of design ideas and/or design requirements for concrete structures and/or their components. The interplay between process-oriented design and innovative implementation technology may ultimately lead to an architecture conceived on a different level of complexity, with an extended form-vocabulary and of high quality.
series	thesis:PhD
last changed	2005/09/09 12:58

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	d60a
authors	Casti, J.C.
year	1997
title	Would be Worlds: How simulation is changing the frontiers of science
source	John Wiley & Sons, Inc., New York.
summary	Five Golden Rules is caviar for the inquiring reader. Anyone who enjoyed solving math problems in high school will be able to follow the author's explanations, even if high school was a long time ago. There is joy here in watching the unfolding of these intricate and beautiful techniques. Casti's gift is to be able to let the nonmathematical reader share in his understanding of the beauty of a good theory.-Christian Science Monitor "[Five Golden Rules] ranges into exotic fields such as game theory (which played a role in the Cuban Missile Crisis) and topology (which explains how to turn a doughnut into a coffee cup, or vice versa). If you'd like to have fun while giving your brain a first-class workout, then check this book out."-San Francisco Examiner "Unlike many popularizations, [this book] is more than a tour d'horizon: it has the power to change the way you think. Merely knowing about the existence of some of these golden rules may spark new, interesting-maybe even revolutionary-ideas in your mind. And what more could you ask from a book?"-New Scientist "This book has meat! It is solid fare, food for thought . . . makes math less forbidding, and much more interesting."-Ben Bova, The Hartford Courant "This book turns math into beauty."-Colorado Daily "John Casti is one of the great science writers of the 1990s."-San Francisco Examiner In the ever-changing world of science, new instruments often lead to momentous discoveries that dramatically transform our understanding. Today, with the aid of a bold new instrument, scientists are embarking on a scientific revolution as profound as that inspired by Galileo's telescope. Out of the bits and bytes of computer memory, researchers are fashioning silicon surrogates of the real world-elaborate "artificial worlds"-that allow them to perform experiments that are too impractical, too costly, or, in some cases, too dangerous to do "in the flesh." From simulated tests of new drugs to models of the birth of planetary systems and galaxies to computerized petri dishes growing digital life forms, these laboratories of the future are the essential tools of a controversial new scientific method. This new method is founded not on direct observation and experiment but on the mapping of the universe from real space into cyberspace. There is a whole new science happening here-the science of simulation. The most exciting territory being mapped by artificial worlds is the exotic new frontier of "complex, adaptive systems." These systems involve living "agents" that continuously change their behavior in ways that make prediction and measurement by the old rules of science impossible-from environmental ecosystems to the system of a marketplace economy. Their exploration represents the horizon for discovery in the twenty-first century, and simulated worlds are charting the course. In Would-Be Worlds, acclaimed author John Casti takes readers on a fascinating excursion through a number of remarkable silicon microworlds and shows us how they are being used to formulate important new theories and to solve a host of practical problems. We visit Tierra, a "computerized terrarium" in which artificial life forms known as biomorphs grow and mutate, revealing new insights into natural selection and evolution. We play a game of Balance of Power, a simulation of the complex forces shaping geopolitics. And we take a drive through TRANSIMS, a model of the city of Albuquerque, New Mexico, to discover the root causes of events like traffic jams and accidents. Along the way, Casti probes the answers to a host of profound questions these "would-be worlds" raise about the new science of simulation. If we can create worlds inside our computers at will, how real can we say they are? Will they unlock the most intractable secrets of our universe? Or will they reveal instead only the laws of an alternate reality? How "real" do these models need to be? And how real can they be? The answers to these questions are likely to change the face of scientific research forever.
series	other
last changed	2003/04/23 15:14

_id	75a8
authors	Achten, Henri H.
year	1997
title	Generic representations : an approach for modelling procedural and declarative knowledge of building types in architectural design
source	Eindhoven University of Technology
summary	The building type is a knowledge structure that is recognised as an important element in the architectural design process. For an architect, the type provides information about norms, layout, appearance, etc. of the kind of building that is being designed. Questions that seem unresolved about (computational) approaches to building types are the relationship between the many kinds of instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called ‘prototypes’) face problems clarifying these questions. The research work at hand proposes to investigate the role of knowledge associated with building types in the design process.Knowledge of the building type must be represented during the design process. Therefore, it is necessary to find a representation which supports design decisions, supports the changes and transformations of the design during the design process, encompasses knowledge of the design task, and which relates to the way architects design. It is proposed in the research work that graphic representations can be used as a medium to encode knowledge of the building type. This is possible if they consistently encode the things they represent; if their knowledge content can be derived, and if they are versatile enough to support a design process of a building belonging to a type.A graphic representation consists of graphic entities such as vertices, lines, planes, shapes, symbols, etc. Establishing a graphic representation implies making design decisions with respect to these entities. Therefore it is necessary to identify the elements of the graphic representation that play a role in decision making. An approach based on the concept of ‘graphic units’ is developed. A graphic unit is a particular set of graphic entities that has some constant meaning. Examples are: zone, circulation scheme, axial system, and contour. Each graphic unit implies a particular kind of design decision (e.g. functional areas, system of circulation, spatial organisation, and layout of the building). By differentiating between appearance and meaning, it is possible to define the graphic unit relatively shape-independent.If a number of graphic representations have the same graphic units, they deal with the same kind of design decisions. Graphic representations that have such a specifically defined knowledge content are called ‘generic representations.’ An analysis of over 220 graphic representations in the literature on architecture results in 24 graphic units and 50 generic representations. For each generic representation the design decisions are identified. These decisions are informed by the nature of the design task at hand. If the design task is a building belonging to a building type, then knowledge of the building type is required. In a single generic representation knowledge of norms, rules, and principles associated with the building type are used. Therefore, a single generic representation encodes declarative knowledge of the building type. A sequence of generic representations encodes a series of design decisions which are informed by the design task. If the design task is a building type, then procedural knowledge of the building type is used.By means of the graphic unit and generic representation, it is possible to identify a number of relations that determine sequences of generic representations. These relations are: additional graphic units, themes of generic representations, and successive graphic units. Additional graphic units defines subsequent generic representations by adding a new graphic unit. Themes of generic representations defines groups of generic representations that deal with the same kind of design decisions. Successive graphic units defines preconditions for subsequent or previous generic representations. On the basis of themes it is possible to define six general sequences of generic representations. On the basis of additional and successive graphic units it is possible to define sequences of generic representations in themes. On the basis of these sequences, one particular sequence of 23 generic representations is defined.The particular sequence of generic representations structures the decision process of a building type. In order to test this assertion, the particular sequence is applied to the office building type. For each generic representation, it is possible to establish a graphic representation that follows the definition of the graphic units and to apply the required statements from the office building knowledge base. The application results in a sequence of graphic representations that particularises an office building design.Implementation of seven generic representations in a computer aided design system demonstrates the use of generic representations for design support. The set is large enough to provide additional weight to the conclusion that generic representations map declarative and procedural knowledge of the building type.
series	thesis:PhD
email
more	http://alexandria.tue.nl/extra2/9703788.pdf
last changed	2003/11/21 15:15

_id	0e8f
authors	Alavalkama, I. and Siitonen, P.
year	1997
title	Developing a new endoscopy laboratory with digital tools.
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	Tampere School of Architecture had to leave its old down-town building and move to the TU Tampere university campus in Hervanta, 10 km away. In this process, the 20 years old endoscopic system "The Urban Simulator" was one of the victims. Old mechanical parts and especially the original home-built microcomputer system were too old to compete with modern computer-aided methods. A new endoscopical system is now under construction, using all of the 20-year experience, new technical components and computers for camera control and picture processing. Real-material modelling is used together with computer-aided planning and visualization methods taking the best from both sides.
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

_id	acadia23_v1_136
id	acadia23_v1_136
authors	Alima, Natalia
year	2023
title	InterspeciesForms
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 136-143.
summary	The hybridization of architectural, biological and robotic agencies Situated in the field of architectural biodesign, InterspeciesForms explores a closer relationship between the fungus Pleurotus ostreatus and the designer in the creation of form. The intention of hybridizing mycelia’s agency of growth with architectural design intention is to generate novel, non-indexical crossbred designed outcomes that evolve preconceived notions of architectural form. Mycelium are threadlike fibrous root systems made up of hyphae, that form the vegetative part of a fungus (Jones 2020). Known as the hackers of the wood wide web (Simard 1997) mycelia form complex symbiotic relationships with other species that inhabit our earth. Michael Lim states “Fungi redefine resourcefulness, collaboration, resilience and symbiosis” (Lim 2022, p. 14). When wandering around the forest to connect with other species or searching for food, fungi form elaborate and entangled networks by spreading their hyphal tips. Shown in Figure 1, this living labyrinth results in the aesthetic formation of an intricate web. Due to the organisms ability to determine the most effective direction of growth, communicate with its surrounding ecosystem, and connect with other species, fungi are indeed an intelligent species with a unique aesthetic that must not be ignored. In drawing on these concepts, I refer to the organism’s ability to search for, tangle, and digest its surroundings as ‘mycelia agency of growth’. It is this specific behavioral characteristic that is the focus of this research, with which I, as the architect, set out to co-create and hybridize with.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia03_022
id	acadia03_022
authors	Anders, Peter
year	2003
title	Towards Comprehensive Space: A context for the programming/design of cybrids
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 161-171
doi	https://doi.org/10.52842/conf.acadia.2003.161
summary	Cybrids have been presented as mixed realities: spatial, architectural compositions comprised of physical and cyberspaces (Anders 1997). In order to create a rigorous approach to the design of architectural cybrids, this paper offers a model for programming their spaces. Other than accepting cyberspaces as part of architecture’s domain, this approach is not radical. Indeed, many parts of program development resemble those of conventional practice. However, the proposition that cyberspaces should be integrated with material structures requires that their relationship be developed from the outset of a project. Hence, this paper provides a method for their integration from the project’s earliest stages, the establishment of its program. This study for an actual project, the Planetary Collegium, describes a distributed campus comprising buildings and cyberspaces in various locales across the globe. The programming for these cybrids merges them within a comprehensive space consisting not only of the physical and cyberspaces, but also in the cognitive spaces of its designers and users.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	a93b
authors	Anders, Peter
year	1997
title	Cybrids: Integrating Cognitive and Physical Space in Architecture
source	Design and Representation [ACADIA ‘97 Conference Proceedings / ISBN 1-880250-06-3] Cincinatti, Ohio (USA) 3-5 October 1997, pp. 17-34
doi	https://doi.org/10.52842/conf.acadia.1997.017
summary	People regularly use non-physical, cognitive spaces to navigate and think. These spaces are important to architects in the design and planning of physical buildings. Cognitive spaces inform design - often underlying principles of architectural composition. They include zones of privacy, territory and the space of memory and visual thought. They let us to map our environment, model or plan projects, even imagine places like Heaven or Hell. Cyberspace is an electronic extension of this cognitive space. Designers of virtual environments already know the power these spaces have on the imagination. Computers are no longer just tools for projecting buildings. They change the very substance of design. Cyberspace is itself a subject for design. With computers architects can design space both for physical and non-physical media. A conscious integration of cognitive and physical space in architecture can affect construction and maintenance costs, and the impact on natural and urban environments. This paper is about the convergence of physical and electronic space and its potential effects on architecture. The first part of the paper will define cognitive space and its relationship to cyberspace. The second part will relate cyberspace to the production of architecture. Finally, a recent project done at the University of Michigan Graduate School of Architecture will illustrate the integration of physical and cyberspaces.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	0c91
authors	Asanowicz, Aleksander
year	1997
title	Computer - Tool vs. Medium
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
doi	https://doi.org/10.52842/conf.ecaade.1997.x.b2e
summary	We have arrived an important juncture in the history of computing in our profession: This history is long enough to reveal clear trends in the use of computing, but not long to institutionalize them. As computers peremate every area of architecture - from design and construction documents to project administration and site supervision - can “virtual practice” be far behind? In the old days, there were basically two ways of architects working. Under stress. Or under lots more stress. Over time, someone forwarded the radical motion that the job could be easier, you could actually get more work done. Architects still have been looking for ways to produce more work in less time. They need a more productive work environment. The ideal environment would integrate man and machine (computer) in total harmony. As more and more architects and firms invest more and more time, money, and effort into particular ways of using computers, these practices will become resistant to change. Now is the time to decide if computing is developing the way we think it should. Enabled and vastly accelerated by technology, and driven by imperatives for cost efficiency, flexibility, and responsiveness, work in the design sector is changing in every respect. It is stands to reason that architects must change too - on every level - not only by expanding the scope of their design concerns, but by altering design process. Very often we can read, that the recent new technologies, the availability of computers and software, imply that use of CAAD software in design office is growing enormously and computers really have changed the production of contract documents in architectural offices.
keywords	Computers, CAAD, Cyberreal, Design, Interactive, Medium, Sketches, Tools, Virtual Reality
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/asan/asanowic.htm
last changed	2022/06/07 07:50

_id	8ec9
authors	Asanowicz, Alexander
year	1997
title	Incompatible Pencil - Chance for Changing in Design Process
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 93-101
summary	The existing Caad systems limit designers creativity by constraining them to work with prototypes provided by the system's knowledge base. Most think of computers as drafting machines and consider CAAD models as merely proposals for future buildings. But this kind of thinking (computers as simple drafting machines) seems to be a way without future. New media demands new process and new process demands new media. We have to give some thougt to impact of CAAD on the design process and in which part of it CAAD can add new value. In this paper there will be considered two ways of using of computers. First - creation of architectural form in an architect's mind and projects visualisation with using renderings, animation and virtual reality. In the second part - computer techniques are investigated as a medium of creation. Unlike a conventional drawing the design object within computer has a life of its own. In computer space design and the final product are one. Computer creates environments for new kind of design activities. In fact, many dimensions of meaning in cyberspace have led to a cyberreal architecture that is sure to have dramatic consequences for the profession.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	eb53
authors	Asanowicz, K. and Bartnicka, M.
year	1997
title	Computer analysis of visual perception - endoscopy without endoscope
source	Architectural and Urban Simulation Techniques in Research and Education [Proceedings of the 3rd European Architectural Endoscopy Association Conference / ISBN 90-407-1669-2]
summary	This paper presents a method of using computer animation techniques in order to solve problems of visual pollution of city environment. It is our observation that human-inducted degradation of city environmental results from well - intentioned but inappropriate preservation actions by uninformed designers and local administration. Very often, a local municipality administration permits to build bad-fitting surroundings houses. It is usually connected with lack of visual information's about housing areas of a city, its features and characteristics. The CAMUS system (Computer Aided Management of Urban Structure) is being created at the Faculty of Architecture of Bialystok Technical University. One of its integral parts is VIA - Visual Impact of Architecture. The basic element of this system is a geometrical model of the housing areas of Bialystok. This model can be enhanced using rendering packages as they create the basis to check our perception of a given area. An inspiration of this approach was the digital endoscopy presented by J. Breen and M. Stellingwerff at the 2nd EAEA Conferences in Vienna. We are presenting the possibilities of using simple computer programs for analysis of spatial model. This contribution presents those factors of computer presentation which can demonstrate that computers achieve such effects as endoscope and often their use be much more efficient and effective.
keywords	Architectural Endoscopy, Endoscopy, Simulation, Visualisation, Visualization, Real Environments
series	EAEA
email
more	http://www.bk.tudelft.nl/media/eaea/eaea97.html
last changed	2005/09/09 10:43

For more results click below: