Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 520

Reformat results as: short short into frame detailed detailed into frame

_id	ea41
authors	Scheurer, Fabian and Lintl, Christoph
year	1997
title	The Munich Project: An Online Information System on Architecture in Munich
doi	https://doi.org/10.52842/conf.ecaade.1997.x.e1v
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	The starting point for the following considerations is a proposition that usually evokes immediate contradiction from architects - from students as well as from professionals
keywords	Online Information System, Munich
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/scheurer/scheurer.htm
last changed	2022/06/07 07:50

_id	6496
authors	Chen, Y.Z. and Maver, T.W.
year	1997
title	Integrating Design Tools within a Human Collaborative Working
source	The Int. Journal of Construction IT 5(2), pp. 47-73
summary	This paper stresses the importance of establishing a collaborative working context as the basis for design integration. Within a virtual studio environment framework, a hybrid architecture for design tool integration is presented. Each design tool is wrapped as an autonomous service provider with its own data store; thus the project design data is physically distributed with the design tools. A global product model, which is augmented with meta-data description, is employed to provide a common vocabulary for communications and to assist the management of the distributed resources and activities. Collaboration-aware information is modelled and structured through the meta-data model and a tool model. Based on this, mechanisms for tool service coodination in varying modes are developed. It is then illustrated, through an implemented prototype system, how the integrated design tools might be used in human design work.
series	journal paper
last changed	2003/05/15 21:45

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	751d
authors	Cubero, R., Caldera, N., Indriago, J.A., Camacaro, L., Nixon, M. and Cestary, J.
year	2001
title	Georeferenciando revicios y recursos turisticos para la plaificacion territorial: El Sigtur-Zulia [Georeferential Services and Touristic Resources for Territorial Planning: The Sigtur-Zulia]
source	2da Conferencia Venezolana sobre Aplicación de Computadores en Arquitectura, Maracaibo (Venezuela) december 2001, pp. 146-155
summary	In 1997, the Research Institute of Faculty of Architecture and Design, University of Zulia, started the R&D project of a decision making support system for tourism planning. For this, GIS technologies have been used for geocodification and spatial analysis of all the tourism facilities and resources existing in Zulia State, studying this kind of socioeconomic development according to critical poverty problems that are typical of their population. This paper describes this geographic information system, with the application of accessibility analysis, areas of influence, and threedimensional studies through network analysisó three-dimensional analysis with ArcView GIS clients, ArcExplorer clients, and MapObjects clients, on an MS Windows NT client/server environment.
keywords	GIS; Tourism Planning; Internet; Desktop Mapping
series	other
email
last changed	2003/02/14 08:29

_id	75a8
authors	Achten, Henri H.
year	1997
title	Generic representations : an approach for modelling procedural and declarative knowledge of building types in architectural design
source	Eindhoven University of Technology
summary	The building type is a knowledge structure that is recognised as an important element in the architectural design process. For an architect, the type provides information about norms, layout, appearance, etc. of the kind of building that is being designed. Questions that seem unresolved about (computational) approaches to building types are the relationship between the many kinds of instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called ‘prototypes’) face problems clarifying these questions. The research work at hand proposes to investigate the role of knowledge associated with building types in the design process.Knowledge of the building type must be represented during the design process. Therefore, it is necessary to find a representation which supports design decisions, supports the changes and transformations of the design during the design process, encompasses knowledge of the design task, and which relates to the way architects design. It is proposed in the research work that graphic representations can be used as a medium to encode knowledge of the building type. This is possible if they consistently encode the things they represent; if their knowledge content can be derived, and if they are versatile enough to support a design process of a building belonging to a type.A graphic representation consists of graphic entities such as vertices, lines, planes, shapes, symbols, etc. Establishing a graphic representation implies making design decisions with respect to these entities. Therefore it is necessary to identify the elements of the graphic representation that play a role in decision making. An approach based on the concept of ‘graphic units’ is developed. A graphic unit is a particular set of graphic entities that has some constant meaning. Examples are: zone, circulation scheme, axial system, and contour. Each graphic unit implies a particular kind of design decision (e.g. functional areas, system of circulation, spatial organisation, and layout of the building). By differentiating between appearance and meaning, it is possible to define the graphic unit relatively shape-independent.If a number of graphic representations have the same graphic units, they deal with the same kind of design decisions. Graphic representations that have such a specifically defined knowledge content are called ‘generic representations.’ An analysis of over 220 graphic representations in the literature on architecture results in 24 graphic units and 50 generic representations. For each generic representation the design decisions are identified. These decisions are informed by the nature of the design task at hand. If the design task is a building belonging to a building type, then knowledge of the building type is required. In a single generic representation knowledge of norms, rules, and principles associated with the building type are used. Therefore, a single generic representation encodes declarative knowledge of the building type. A sequence of generic representations encodes a series of design decisions which are informed by the design task. If the design task is a building type, then procedural knowledge of the building type is used.By means of the graphic unit and generic representation, it is possible to identify a number of relations that determine sequences of generic representations. These relations are: additional graphic units, themes of generic representations, and successive graphic units. Additional graphic units defines subsequent generic representations by adding a new graphic unit. Themes of generic representations defines groups of generic representations that deal with the same kind of design decisions. Successive graphic units defines preconditions for subsequent or previous generic representations. On the basis of themes it is possible to define six general sequences of generic representations. On the basis of additional and successive graphic units it is possible to define sequences of generic representations in themes. On the basis of these sequences, one particular sequence of 23 generic representations is defined.The particular sequence of generic representations structures the decision process of a building type. In order to test this assertion, the particular sequence is applied to the office building type. For each generic representation, it is possible to establish a graphic representation that follows the definition of the graphic units and to apply the required statements from the office building knowledge base. The application results in a sequence of graphic representations that particularises an office building design.Implementation of seven generic representations in a computer aided design system demonstrates the use of generic representations for design support. The set is large enough to provide additional weight to the conclusion that generic representations map declarative and procedural knowledge of the building type.
series	thesis:PhD
email
more	http://alexandria.tue.nl/extra2/9703788.pdf
last changed	2003/11/21 15:15

_id	a35a
authors	Arponen, Matti
year	2002
title	From 2D Base Map To 3D City Model
source	UMDS '02 Proceedings, Prague (Czech Republic) 2-4 October 2002, I.17-I.28
summary	Since 1997 Helsinki City Survey Division has proceeded in experimenting and in developing the methods for converting and supplementing current digital 2D base maps in the scale 1:500 to a 3D city model. Actually since 1986 project areas have been produced in 3D for city planning and construction projects, but working with the whole map database started in 1997 because of customer demands and competitive 3D projects. 3D map database needs new data modelling and structures, map update processes need new working orders and the draftsmen need to learn a new profession; the 3D modeller. Laser-scanning and digital photogrammetry have been used in collecting 3D information on the map objects. During the years 1999-2000 laser-scanning experiments covering 45 km2 have been carried out utilizing the Swedish TopEye system. Simultaneous digital photography produces material for orto photo mosaics. These have been applied in mapping out dated map features and in vectorizing 3D buildings manually, semi automatically and automatically. In modelling we use TerraScan, TerraPhoto and TerraModeler sw, which are developed in Finland. The 3D city model project is at the same time partially a software development project. An accuracy and feasibility study was also completed and will be shortly presented. The three scales of 3D models are also presented in this paper. Some new 3D products and some usage of 3D city models in practice will be demonstrated in the actual presentation.
keywords	3D City modeling
series	other
email
more	www.udms.net
last changed	2003/11/21 15:16

_id	sigradi2006_e131c
id	sigradi2006_e131c
authors	Ataman, Osman
year	2006
title	Toward New Wall Systems: Lighter, Stronger, Versatile
source	SIGraDi 2006 - [Proceedings of the 10th Iberoamerican Congress of Digital Graphics] Santiago de Chile - Chile 21-23 November 2006, pp. 248-253
summary	Recent developments in digital technologies and smart materials have created new opportunities and are suggesting significant changes in the way we design and build architecture. Traditionally, however, there has always been a gap between the new technologies and their applications into other areas. Even though, most technological innovations hold the promise to transform the building industry and the architecture within, and although, there have been some limited attempts in this area recently; to date architecture has failed to utilize the vast amount of accumulated technological knowledge and innovations to significantly transform the industry. Consequently, the applications of new technologies to architecture remain remote and inadequate. One of the main reasons of this problem is economical. Architecture is still seen and operated as a sub-service to the Construction industry and it does not seem to be feasible to apply recent innovations in Building Technology area. Another reason lies at the heart of architectural education. Architectural education does not follow technological innovations (Watson 1997), and that “design and technology issues are trivialized by their segregation from one another” (Fernandez 2004). The final reason is practicality and this one is partially related to the previous reasons. The history of architecture is full of visions for revolutionizing building technology, ideas that failed to achieve commercial practicality. Although, there have been some adaptations in this area recently, the improvements in architecture reflect only incremental progress, not the significant discoveries needed to transform the industry. However, architectural innovations and movements have often been generated by the advances of building materials, such as the impact of steel in the last and reinforced concrete in this century. There have been some scattered attempts of the creation of new materials and systems but currently they are mainly used for limited remote applications and mostly for aesthetic purposes. We believe a new architectural material class is needed which will merge digital and material technologies, embedded in architectural spaces and play a significant role in the way we use and experience architecture. As a principle element of architecture, technology has allowed for the wall to become an increasingly dynamic component of the built environment. The traditional connotations and objectives related to the wall are being redefined: static becomes fluid, opaque becomes transparent, barrier becomes filter and boundary becomes borderless. Combining smart materials, intelligent systems, engineering, and art can create a component that does not just support and define but significantly enhances the architectural space. This paper presents an ongoing research project about the development of new class of architectural wall system by incorporating distributed sensors and macroelectronics directly into the building environment. This type of composite, which is a representative example of an even broader class of smart architectural material, has the potential to change the design and function of an architectural structure or living environment. As of today, this kind of composite does not exist. Once completed, this will be the first technology on its own. We believe this study will lay the fundamental groundwork for a new paradigm in surface engineering that may be of considerable significance in architecture, building and construction industry, and materials science.
keywords	Digital; Material; Wall; Electronics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia07_174
id	acadia07_174
authors	Bontemps, Arnaud; Potvin, André; Demers, Claude
year	2007
title	The Dynamics of Physical Ambiences
doi	https://doi.org/10.52842/conf.acadia.2007.174
source	Expanding Bodies: Art • Cities• Environment [Proceedings of the 27th Annual Conference of the Association for Computer Aided Design in Architecture / ISBN 978-0-9780978-6-8] Halifax (Nova Scotia) 1-7 October 2007, 174-181
summary	This research proposes to support the reading of physical ambiences by the development of a representational technique which compiles, in a numerical interface, two types of data: sensory and filmic. These data are recorded through the use of a portable array equipped with sensors (Potvin 1997, 2002, 2004) as well as the acquisition of Video information of the moving environment. The compilation of information is carried out through a multi-media approach, by means of a program converting the environmental data into dynamic diagrams, as well as the creation of an interactive interface allowing a possible diffusion on the Web. This technique, named APMAP/Video, makes it possible to read out simultaneously spatial and environmental diversity. It is demonstrated through surveys taken at various seasons and time of the day at the new Caisse de dépôt et de placement headquarters in Montreal which is also the corpus for a SSHRC (Social Sciences and Humanities Research Council) research grant on Environmental Adaptability in Architecture (Potvin et al. 2003-2007). This case study shows that the technique can prove of great relevance for POEs (Post Occupancy Evaluation) as well as for assistance in a new design project.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	35a1
authors	Caneparo, L.
year	1997
title	Shared Information System for Urban and Architectural Design
source	Coyne, R. Ramscar, M. Lee, J. and Zreik, K. (eds.) Design and the net. Proceedings of the Sixth International EuropIA Conference, Europia Productions, Paris, pp. 39-52
summary	This paper briefly describes the implementation of an Internet-intranet information system applied to a large-scale project. The large-scale project is centered on the urban area around the Porta Susa railway station in Turin, Italy. The information system integrates the communicative tools used to facilitate and improve the collaboration between the different actors working on the project and the distributed environment used to elaborate the information across a wide area network. The main factors considered are those which exploit the potentialities of computers and networks for interaction and communication. One result is the possibility of interacting dynamically with the information, re-elaborating and distributing it in progress. The information systems opens different ways of collaboration between the project employees, and extends the participation in the project to the citizens.
series	other
email
last changed	2003/04/23 15:14

_id	80f7
authors	Carrara, G., Fioravanti, A. and Novembri, G.
year	2001
title	Knowledge-based System to Support Architectural Design - Intelligent objects, project net-constraints, collaborative work
doi	https://doi.org/10.52842/conf.ecaade.2001.080
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 80-85
summary	The architectural design business is marked by a progressive increase in operators all cooperating towards the realization of building structures and complex infrastructures (Jenckes, 1997). This type of design implies the simultaneous activity of specialists in different fields, often working a considerable distance apart, on increasingly distributed design studies. Collaborative Architectural Design comprises a vast field of studies that embraces also these sectors and problems. To mention but a few: communication among operators in the building and design sector; design process system logic architecture; conceptual structure of the building organism; building component representation; conflict identification and management; sharing of knowledge; and also, user interface; global evaluation of solutions adopted; IT definition of objects; inter-object communication (in the IT sense). The point of view of the research is that of the designers of the architectural artefact (Simon, 1996); its focus consists of the relations among the various design operators and among the latter and the information exchanged: the Building Objects. Its primary research goal is thus the conceptual structure of the building organism for the purpose of managing conflicts and developing possible methods of resolving them.
keywords	Keywords. Collaborative Design, Architectural And Building Knowledge, Distributed Knowledge Bases, Information Management, Multidisciplinarity
series	eCAADe
email
last changed	2022/06/07 07:55

_id	fa1d
authors	Colley, Tim
year	1997
title	Visualizing Information: Internet Guidelines for Distributing Architectural Research
source	Virginia Polytechnic Institute and State University
summary	A web site was designed and constructed for the Research + Demonstration Facility (RDF) as a masters thesis project to help educators teach future architects more interactively by using the dynamic medium of the Internet. Students and faculty will learn about evolving architectural research and technology as well as potential consequences of design decisions. Educators will be able to conduct online research, or tele-experiments, in the classroom thus allowing students to learn, in near real-time, the outcome or progress of research on and off campus. This project presents some of the possibilities of how the Internet can enhance re-search information delivery to students and faculty of architecture.
keywords	Architectural Research; Internet Guidelines; Web Site Documentation
series	thesis:MSc
email
more	http://scholar.lib.vt.edu/theses/available/etd-92397-115337/
last changed	2004/06/02 19:12

_id	460e
authors	Dannettel, Mark E
year	1997
title	Interactive Multimedia Design: Operational Structures and Intuitive Environments for CD-ROM
doi	https://doi.org/10.52842/conf.caadria.1997.415
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 415-427
summary	This paper presents practical design concepts for the production of CD-ROMs or on-line media projects which are intended for scholastic and professional use. It is based on the experience and knowledge which has been gained while developing a multimedia package here at the Department of Architecture at CUHK. The package deals exclusively with the technical issue of vertical transportation in buildings, and is intended to be used as a design tool in professional offices, as well as in classroom settings. The required research and production for the development of the structures, formats, and interfaces of this project, along with the consequential evaluation and revision of this work, has led to a greater understanding of appropriate applications for interactive interactive multimedia designs. Specially, the paper addresses the fundamental issues of ‘user-format’, and a distinction is made between applications which operate as ‘tools’ and those which operate as ‘resources’. Descriptions are provided for both types of operational formats, and suggestions are made as to how one might decided which format would be appropriate for a specific project. Briefly, resource produces imply that a user actively pursues information in a relatively static environment, while tool procedures imply that a user works jointly with the software to process information and arrive at a unique output. This distinction between the two formats is mostly grounded in the design of the structure and user-interface, and thus the point is made that the material content of the application does not necessarily imply a mandatory use of either format. In light of this observation that an application’s format relies on the appropriateness of operational procedures, rather than on its material content, further discussions of the implications of such procedures (using a ‘resource’ vs. using a ‘tool’) are provided.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	0627
authors	Dijkstra, J. and Timmermans, H.J.P.
year	1997
title	Exploring the Possibilities of Conjoint Measurement as a Decision-Making Tool for Virtual Wayfinding Environments
doi	https://doi.org/10.52842/conf.caadria.1997.061
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 61-71
summary	Virtual reality systems may have a lot to offer in architecture and urban planning when visual and active environments may have a dramatic impact on individual preferences and choice behaviour. Conjoint analysis involves the use of designed hypothetical choice situations to measure individuals’ preferences and predict their choice in new situations. Conjoint experiments involve the design and analysis of hypothetical decision tasks. Alternatives are described by their main features, called attributes. Multiple hypothetical alternatives, called product profiles, are generated and presented to respondents, who are requested to express their degree of preference for these profiles or choose between these profiles. Conjoint experiments have become a popular tool to model individual preferences and decision-making in a variety of research areas. Most studies of conjoint analysis have involved a verbal description of product profiles, although some studies have used a pictorial presentation of production profiles. Virtual reality systems offer the potential of moving the response format beyond these traditional response modes. This paper describes a particular aspect of an ongoing research project which aims to develop a virtual reality based system for conjoint analysis. The principles underlying the system will be illustrated by a simple example of wayfinding in a virtual environment.
series	CAADRIA
last changed	2022/06/07 07:55

_id	0755
authors	Donath, Dirk and Petzold, Frank
year	1997
title	A Digital Way of Planning Based on Information Surveying
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 183-188
summary	The aim of this project is to develop a software system for generating complex digital models of existing buildings and structures, i.e. in the broadest sense a computer-supported surveying and management system for existing buildings. The built environment is registered by surveying a series of geometrical and building relevant information broken down into different levels of abstraction. The recorded data consists of a variety of geometric, multimedia and verbal - less structured - pieces of information. The starting point for developing such a system is both an analysis and reworking of the methods used in architectural surveying, and the evaluation and use of current techniques and tools in the field of computer applications.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	c906
authors	Ekholm, Anders and Fridqvist, Sverker
year	1997
title	Design and Modelling in a Computer Integrated Construction Process - The BAS-CAAD Project
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 501-518
summary	A new approach to product modelling in a design context is proposed. CAD-software must not only enable product modelling, but must also support product design. This is not fully achieved in the traditional 'enumerative' approach to product modelling. We discuss how product design and modelling can be based on a facetted' approach to information modelling, and how a data model that supports the design process can be based on a framework for system information. The background for our research is the current development in the construction industry towards a computer integrated construction process. A first prerequisite for this is the use of computer based models. Another prerequisite is that CAD-software can support the design of the results of the construction process, including construction works, user organisations, and the production and facility management processes. A third prerequisite is that computer based models are built with standardised concepts and terminology to enable exchange of information between different actors and computer systems during different stages of the construction process. Principles for organising frameworks for user organisation and construction works information are presented in an appendix.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	f5ee
authors	Erhorn, H., De Boer, J. and Dirksmueller, M.
year	1997
title	ADELINE, an Integrated Approach to Lighting Simulation
source	Proceedings of Right Light 4, 4th European Conference on Energy-Efficient Lighting, pp.99-103
summary	The use of daylighting and artificial lighting simulation programs to calculate complex systems and models in the design practice often is impeded by the fact that the operation of these programs, especially the model input, is extremely complicated and time-consuming. Programs that are easier to use generally do not show the calculation capabilities required in practice. A second obstacle arises as the lighting calculations often do not allow any statements regarding the interactions with the energetic and thermal building performance. Both problems are mainly due to a lacking integration of the design tools of other building design practitioners as well as due to insufficient user interfaces. The program package ADELINE (Advanced Daylight and Electric Lighting Integrated New Environment) being available since May 1996 as completely revised version 2.0 presents a promising approach to solve these problems. This contribution describes the approaches and methods used within the international project IEA Task 21 for a further development of the ADELINE system. Aim of this work is a further improvement of user interfaces based on the inclusion of new dialogs and on a portation of the program system from MS-DOS to the Windows NT platform. Additional focus is laid on the use of recent developments in the field of information technology and experiences gained in other projects on integrated building design systems, like for example EU-COMBINE, in a pragmatical way. An integrated building design system with open standardized interfaces is to be achieved inter alia by using ISOSTEP formats, database technologies and a consequent, object-oriented design.
series	other
last changed	2003/04/23 15:50

_id	673a
authors	Fukuda, T., Nagahama, R. and Sasada, T.
year	1997
title	Networked Interactive 3-D design System for Collaboration
doi	https://doi.org/10.52842/conf.caadria.1997.429
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 429-437
summary	The concept of ODE (Open Design Environment) and corresponding system were presented in 1991. Then the new concept of NODE. which is networked version of ODE. was generated to make wide area collaboration in 1994. The aim of our research is to facilitate the collaboration among the various people involved in the design process of an urban or architectural project. This includes various designers and engineers, the client and the citizens who may be affected by such a project. With the new technologies of hyper medium, network, and component architecture, we have developed NODE system and applied in practical use of the collaboration among the various people. This study emphasizes the interactive 3-D design tool of NODE which is able to make realistic and realtime presentation with interactive interface. In recent years, ProjectFolder of NODE system, which is a case including documents, plans, and tools to proceed project., is created in the World Wide Web (WWW) and makes hyper links between a 3-D object and a text, an image. and other digital data.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	2c17
authors	Junge, Richard and Liebich, Thomas
year	1997
title	Product Data Model for Interoperability in an Distributed Environment
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 571-589
summary	This paper belongs to a suite of three interrelated papers. The two others are 'The VEGA Platform' and 'A Dynamic Product Model'. These two companion papers are also based on the VEGA project. The ESPRIT project VEGA (Virtual Enterprises using Groupware tools and distributed Architectures) has the objective to develop IT solutions enabling virtual enterprises, especially in the domain of architectural design and building engineering. VEGA shall give answers to many questions of what is needed for enabling such virtual enterprise from the IT side. The questions range from technologies for networks, communication between distributed applications, control, management of information flow to implementation and model architectures to allow distribution of information in the virtual enterprises. This paper is focused on the product model aspect of VEGA. So far modeling experts have followed a more or less centralized architecture (central or central with 4 satellites'). Is this also the architecture for the envisaged goal? What is the architecture for such a distributed model following the paradigm of modeling the , natural human' way of doing business? What is the architecture enabling most effective the filtering and translation in the communication process. Today there is some experience with 'bulk data' of the document exchange type. What is with incremental information (not data) exchange? Incremental on demand only the really needed information not a whole document. The paper is structured into three parts. First there is description of the modeling history or background. the second a vision of interoperability in an distributed environment from the users coming from architectural design and building engineering view point. Third is a description of work undertaken by the authors in previous project forming the direct basis for the VEGA model. Finally a short description of the VEGA project, especially the VEGA model architecture.
series	CAAD Futures
email
last changed	1999/04/06 09:19

_id	e835
authors	Kaga, A. and Sasada, T. (et al).
year	1997
title	City information Visualizer Using 3-D model and Computer Graphics
source	Proceedings of the 20th Symposium on Computer Technology of Information, Systems and Applications (AIJ), pp. 205-210
summary	3-D models and computer graphics with its visual characteristics enables easier understanding of various information. Up until now 3-D models and computer graphics has not been used for the analysis of city information due to its high cost and the need for special techniques. Currently, we have discovered new technology in hyper medium based on network technology and lower costs. This paper focuses on the construction of an interactive and visual 3-D city information system, aiming at the 'idea processor' for research and analysis of city planning and market research. We have discovered the requirements necessary for the City Information Visualizer system. Using this technology we will construct the prototype system of the 3-D City Information Visualizer. This system is based on the personal computer and the Client/Server system. The system is then applied to practical city analysis. This paper presents the prototype system and its evaluation in a real project.
series	other
last changed	2003/04/23 15:50

_id	8e5c
authors	Khemlani, Lachmi and Kalay, Yehuda E.
year	1997
title	An Integrated Computing Environment for Collaborative, Multi-Disciplinary Building Design
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 389-416
summary	The increasing complexity of the built environment requires that more knowledge and experience be brought to bear on its design, construction and maintenance. The commensurate growth of knowledge in the participating disciplines-architecture, engineering, construction management, facilities management, and others-has tended to diversify each one into many sub-specializations. The resulting fragmentation of the design-built-use process is potentially detrimental to the overall quality of built environment. An efficient system of collaboration between all the specialist participants is needed to offset the effects of fragmentation. It is here that computers, with their ubiquitous presence in all disciplines, can serve as a medium of communication and form the basis of a collaborative, multi- disciplinary design environment. This paper describes the ongoing research on the development of such an integrated computing environment that will provide the basis for design and evaluation tools ranging across the many building-related disciplines. The bulk of the discussion will focus on the problem of a building representation that can be shared by all these disciplines, which, we posit, lies at the core of such an environment. We discuss the criteria that characterize this shared building representation, and present our solution to the problem. The proposed model has been adapted from geometric modeling, and addresses explicitly the difficult Problem of generality versus completeness of the represented information. The other components of the integrated environment that are under development are also described. The paper concludes with some implementation details and a brief look at two evaluation tools that use the proposed building representation for their task.
series	CAAD Futures
email
last changed	1999/04/06 09:19

For more results click below: