CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 473

_id 8804
authors QaQish, R. and Hanna, R.
year 1997
title A World-wide Questionnaire Survey on the Use of Computers in Architectural Education
doi https://doi.org/10.52842/conf.ecaade.1997.x.c8o
source Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary The paper reports on a study which examines the impact on architectural education needs arising from the changes brought about by the implications of CAD teaching/learning (CAI/CAL). The findings reflect the views of fifty-one (51) architecture schools through a world-wide questionnaire survey conducted in mid 1996. The survey was structured to cover four continents represented by seven countries, namely the USA, UK, Israel, Australia, Canada, Sweden and the Netherlands. Structurally the main findings of this study are summarised under five areas, namely: 1) General Information, 2) Program of Study (curriculum) and CAD course, 3) CAD Laboratories: Hardware, Software, 4) Departmental Current and Future Policies, 5) Multi-media and Virtual Reality. Principally, there were three main objectives for using the computers survey. Firstly, to accommodate a prevalent comprehension of CAD integration into the curriculum of architecture schools world wide. Secondly, to identify the main key factors that control the extent of association between CAD and architectural curriculum. Thirdly, to identify common trends of CAD teaching in Architecture schools world-wide and across the seven countries to establish whether there are any association between them. Several variables and factors that were found to have an impact on AE were examined, namely: the response rate, the conventional methods users and the CAD methods users amongst students, CAD course employment in the curriculum, age of CAD employment, the role of CAD in the curriculum, CAD training time in the Curriculum, CAD laboratories/Hardware & Software, computing staff and technicians, department policies, Multi-Media (MM) and Virtual-Reality (VR). The statistical analysis of the study revealed significant findings, one of which indicates that 35% of the total population of students at the surveyed architecture schools are reported as being CAD users. Out of the 51 architecture schools who participated in this survey, 47 have introduced CAD courses into the curriculum. The impact of CAD on the curriculum was noted to be significant in several areas, namely: architectural design, architectural presentation, structural engineering, facilities management, thesis project and urban design. The top five CAD packages found to be most highly used across universities were, namely, AutoCAD (46), 3DStudio (34), Microstation (23), Form Z (17), ArchiCAD (17). The findings of this study suggest some effective and efficient future directions in adopting some form of effective CAD strategies in the curriculum of architecture. The study also serves as an evaluation tool for computing teaching in the design studio and the curriculum.

 

keywords CAD Integration, Employment, Users and Effectiveness
series eCAADe
email
more http://info.tuwien.ac.at/ecaade/proc/qaqish/qaqish.htm
last changed 2022/06/07 07:50

_id avocaad_2001_20
id avocaad_2001_20
authors Shen-Kai Tang
year 2001
title Toward a procedure of computer simulation in the restoration of historical architecture
source AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary In the field of architectural design, “visualization¨ generally refers to some media, communicating and representing the idea of designers, such as ordinary drafts, maps, perspectives, photos and physical models, etc. (Rahman, 1992; Susan, 2000). The main reason why we adopt visualization is that it enables us to understand clearly and to control complicated procedures (Gombrich, 1990). Secondly, the way we get design knowledge is more from the published visualized images and less from personal experiences (Evans, 1989). Thus the importance of the representation of visualization is manifested.Due to the developments of computer technology in recent years, various computer aided design system are invented and used in a great amount, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and collaboration, etc. (Lawson, 1995; Liu, 1996). The conventional media are greatly replaced by computer media, and the visualization is further brought into the computerized stage. The procedure of visual impact analysis and assessment (VIAA), addressed by Rahman (1992), is renewed and amended for the intervention of computer (Liu, 2000). Based on the procedures above, a great amount of applied researches are proceeded. Therefore it is evident that the computer visualization is helpful to the discussion and evaluation during the design process (Hall, 1988, 1990, 1992, 1995, 1996, 1997, 1998; Liu, 1997; Sasada, 1986, 1988, 1990, 1993, 1997, 1998). In addition to the process of architectural design, the computer visualization is also applied to the subject of construction, which is repeatedly amended and corrected by the images of computer simulation (Liu, 2000). Potier (2000) probes into the contextual research and restoration of historical architecture by the technology of computer simulation before the practical restoration is constructed. In this way he established a communicative mode among archeologists, architects via computer media.In the research of restoration and preservation of historical architecture in Taiwan, many scholars have been devoted into the studies of historical contextual criticism (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000). Clues that accompany the historical contextual criticism (such as oral information, writings, photographs, pictures, etc.) help to explore the construction and the procedure of restoration (Hung, 1995), and serve as an aid to the studies of the usage and durability of the materials in the restoration of historical architecture (Dasser, 1990; Wang, 1998). Many clues are lost, because historical architecture is often age-old (Hung, 1995). Under the circumstance, restoration of historical architecture can only be proceeded by restricted pictures, written data and oral information (Shi, 1989). Therefore, computer simulation is employed by scholars to simulate the condition of historical architecture with restricted information after restoration (Potier, 2000). Yet this is only the early stage of computer-aid restoration. The focus of the paper aims at exploring that whether visual simulation of computer can help to investigate the practice of restoration and the estimation and evaluation after restoration.By exploring the restoration of historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example), this study aims to establish a complete work on computer visualization, including the concept of restoration, the practice of restoration, and the estimation and evaluation of restoration.This research is to simulate the process of restoration by computer simulation based on visualized media (restricted pictures, restricted written data and restricted oral information) and the specialized experience of historical architects (Potier, 2000). During the process of practicing, communicates with craftsmen repeatedly with some simulated alternatives, and makes the result as the foundation of evaluating and adjusting the simulating process and outcome. In this way we address a suitable and complete process of computer visualization for historical architecture.The significance of this paper is that we are able to control every detail more exactly, and then prevent possible problems during the process of restoration of historical architecture.
series AVOCAAD
email
last changed 2005/09/09 10:48

_id d60a
authors Casti, J.C.
year 1997
title Would be Worlds: How simulation is changing the frontiers of science
source John Wiley & Sons, Inc., New York.
summary Five Golden Rules is caviar for the inquiring reader. Anyone who enjoyed solving math problems in high school will be able to follow the author's explanations, even if high school was a long time ago. There is joy here in watching the unfolding of these intricate and beautiful techniques. Casti's gift is to be able to let the nonmathematical reader share in his understanding of the beauty of a good theory.-Christian Science Monitor "[Five Golden Rules] ranges into exotic fields such as game theory (which played a role in the Cuban Missile Crisis) and topology (which explains how to turn a doughnut into a coffee cup, or vice versa). If you'd like to have fun while giving your brain a first-class workout, then check this book out."-San Francisco Examiner "Unlike many popularizations, [this book] is more than a tour d'horizon: it has the power to change the way you think. Merely knowing about the existence of some of these golden rules may spark new, interesting-maybe even revolutionary-ideas in your mind. And what more could you ask from a book?"-New Scientist "This book has meat! It is solid fare, food for thought . . . makes math less forbidding, and much more interesting."-Ben Bova, The Hartford Courant "This book turns math into beauty."-Colorado Daily "John Casti is one of the great science writers of the 1990s."-San Francisco Examiner In the ever-changing world of science, new instruments often lead to momentous discoveries that dramatically transform our understanding. Today, with the aid of a bold new instrument, scientists are embarking on a scientific revolution as profound as that inspired by Galileo's telescope. Out of the bits and bytes of computer memory, researchers are fashioning silicon surrogates of the real world-elaborate "artificial worlds"-that allow them to perform experiments that are too impractical, too costly, or, in some cases, too dangerous to do "in the flesh." From simulated tests of new drugs to models of the birth of planetary systems and galaxies to computerized petri dishes growing digital life forms, these laboratories of the future are the essential tools of a controversial new scientific method. This new method is founded not on direct observation and experiment but on the mapping of the universe from real space into cyberspace. There is a whole new science happening here-the science of simulation. The most exciting territory being mapped by artificial worlds is the exotic new frontier of "complex, adaptive systems." These systems involve living "agents" that continuously change their behavior in ways that make prediction and measurement by the old rules of science impossible-from environmental ecosystems to the system of a marketplace economy. Their exploration represents the horizon for discovery in the twenty-first century, and simulated worlds are charting the course. In Would-Be Worlds, acclaimed author John Casti takes readers on a fascinating excursion through a number of remarkable silicon microworlds and shows us how they are being used to formulate important new theories and to solve a host of practical problems. We visit Tierra, a "computerized terrarium" in which artificial life forms known as biomorphs grow and mutate, revealing new insights into natural selection and evolution. We play a game of Balance of Power, a simulation of the complex forces shaping geopolitics. And we take a drive through TRANSIMS, a model of the city of Albuquerque, New Mexico, to discover the root causes of events like traffic jams and accidents. Along the way, Casti probes the answers to a host of profound questions these "would-be worlds" raise about the new science of simulation. If we can create worlds inside our computers at will, how real can we say they are? Will they unlock the most intractable secrets of our universe? Or will they reveal instead only the laws of an alternate reality? How "real" do these models need to be? And how real can they be? The answers to these questions are likely to change the face of scientific research forever.
series other
last changed 2003/04/23 15:14

_id 8ec9
authors Asanowicz, Alexander
year 1997
title Incompatible Pencil - Chance for Changing in Design Process
source AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 93-101
summary The existing Caad systems limit designers creativity by constraining them to work with prototypes provided by the system's knowledge base. Most think of computers as drafting machines and consider CAAD models as merely proposals for future buildings. But this kind of thinking (computers as simple drafting machines) seems to be a way without future. New media demands new process and new process demands new media. We have to give some thougt to impact of CAAD on the design process and in which part of it CAAD can add new value. In this paper there will be considered two ways of using of computers. First - creation of architectural form in an architect's mind and projects visualisation with using renderings, animation and virtual reality. In the second part - computer techniques are investigated as a medium of creation. Unlike a conventional drawing the design object within computer has a life of its own. In computer space design and the final product are one. Computer creates environments for new kind of design activities. In fact, many dimensions of meaning in cyberspace have led to a cyberreal architecture that is sure to have dramatic consequences for the profession.
series AVOCAAD
last changed 2005/09/09 10:48

_id 0992
authors Belibani, R. and Gadola, A.
year 1997
title On Digital Architecture
doi https://doi.org/10.52842/conf.ecaade.1997.x.r1n
source Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary One of the main aims of this research was to highlight the influence of computer as a designing tool. Their wide acceptance as drawing tools might occult the importance of their role in architectural design. We will try to apprehend, with the help of synthetic images, that computers mark a historic step forward in drawing and representation, as well as a major progress in the understanding of creative processes.

Together these features offer a broader horizon to architectural design. New source of inspiration can be found in virtual reality that makes visible what does not really exist, permitting design to suggest itself with its primordial image. We mean a kind of architectural imprint, where the first three-dimensional lines suggest in some way the designer with their shape, and encourage the definition process.

Through the visualisation of some images, it is possible to show the modifications of language and style, to examine the transformation modalities of the design process and to propose an essay of the new methods to communicate architecture.

series eCAADe
email
more http://info.tuwien.ac.at/ecaade/proc/belibani/belibani.htm
last changed 2022/06/07 07:50

_id debf
authors Bertol, D.
year 1997
title Designing Digital Space - An Architect's Guide to Virtual Reality
source John Wiley & Sons, New York
summary The first in-depth book on virtual reality (VR) aimed specifically at architecture and design professionals, Designing Digital Space steers you skillfully through the learning curve of this exciting new technology. Beginning with a historical overview of the evolution of architectural representations, this unique resource explains what VR is, how it is being applied today, and how it promises to revolutionize not only the design process, but the form and function of the built environment itself. Vividly illustrating how VR fits alongside traditional methods of architectural representation, this comprehensive guide prepares you to make optimum practical use of this powerful interactive tool, and embrace the new role of the architect in a virtually designed world. Offers in-depth coverage of the virtual universe-data representation and information management, static and dynamic worlds, tracking and visual display systems, control devices, and more. Examines a wide range of current VR architectural applications, from walkthroughs, simulations, and evaluations to reconstructions and networked environments Includes insightful essays by leading VR developers covering some of today's most innovative projects Integrates VR into the historical framework of architectural development, with detailed sections on the past, present, and future Features a dazzling array of virtual world images and sequential displays Explores the potential impact of digital architecture on the built environment of the future
series other
last changed 2003/04/23 15:14

_id ce11
authors Bradford, J., Wong, W.S. and Tang, H.F.
year 1997
title Bridging Virtual Reality to Internet for Architecture
doi https://doi.org/10.52842/conf.ecaade.1997.x.m9r
source Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary This paper presents a virtual reality interface tool which allows a user to perform the following action :

1.Import design from other CAD tools.

2.Assemble an architecture structure from a library of pre-built blocks and geometry primitives dynamically created by user.

3.Export the design interactively in VRML format back to the library for Internet browsing.

The geometry primitives include polygon, sphere, cone, cylinder and cube. The pre-built blocks consist of fundamental architecture models which have been categorized with architectural related style, physical properties and environmental attributes. Upon a user’s request, the tool or the composer, has the ability to communicate with the library which indeed is a back-end distributed client-server database engine. The user may specify any combination of properties and attributes in the composer which will instantly bring up all matching 3-dimensional objects through the database engine. The database is designed in relational model and comes from the work of another research group.

keywords Virtual Reality, Architecture Models, Relational Database, Client-Server
series eCAADe
email
more http://info.tuwien.ac.at/ecaade/proc/bradford/bradford.htm
last changed 2022/06/07 07:50

_id 88f9
authors Carrara, G., Novembri, G., Zorgno, A.M., Brusasco, P.L.
year 1997
title Virtual Studio of Design and Technology on Internet (I) - Educator's approach
doi https://doi.org/10.52842/conf.ecaade.1997.x.n2w
source Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary This paper presents a teaching experience involving students and professors from various universities, in Italy and abroad, which began in 1996 and is still on going. The Virtual Studios on the Internet (VSI) have some features in common with the Teaching Studios planned for the new programme of the faculties of Architecture in Italian universities. These are the definition of a common design theme, and the participation of disciplinary teachers. The greatest difference is in the modes of collaboration, which is achieved through information and communication technologies. The chief result of this is that the various work groups in different places can work and collaborate at the same time: the computer networks provide the means to express, communicate and share the design project.
keywords CAAD, Teaching of architectural design, Shared virtual reality, Virtualdesign studio, Collective intelligence.
series eCAADe
email
more http://info.tuwien.ac.at/ecaade/proc/lvi_i&ii/zorgno.html
last changed 2022/06/07 07:50

_id e292
authors Charitos, D. and Bridges, A.H.
year 1997
title On Architectural Design of Virtual Environments
source Design Studies, Vol.18, No. 2, 143-154
summary This paper considers the domains of architectural design and film theory for the purpose of informing the design of virtual environments (VEs). It is suggested that these domains may form a background for the consideration of possible metaphors for the design of VEs. Firstly, the paper investigates the relation between architecture and virtual reality technology, through the nature of drawings and virtual environments as means of representing three-dimensional spaces. Then, differences between VEs and physical environments (PEs) are identified for the purpose of understanding the intrinsic nature of VEs, by comparing them to our familiar everyday spatial experience. This step is considered essential in helping us understand how we might be able to develop an architectural conception of designing spaces, in the context of VEs. The paper then presents two directions towards informing VE design by means of theoretical and practical architectural design knowledge. Finally, the use of film-related studies is considered as a means of enhancing our conception of time and movement in VEs.
series journal paper
email
last changed 2003/04/23 15:50

_id d869
authors Chu, C.-C., Dani, T.H. and Gadh, R.
year 1997
title Multi-sensory user interface for a virtual-reality-based computer-aided design system
source Computer-Aided Design, Vol. 29 (10) (1997) pp. 709-725
summary The generation of geometric shapes called `geometric concept designs' via the multi-sensory user interface of a virtual reality (VR) based system motivates the currentresearch. In this new VR-based system, geometric designs can be more effectively inputted into the computer in a physically intuitive way. The interaction mechanism issimilar to the way in which industrial designers sit and discuss concept design shapes across a table from each other, prior to making a final decision about the productdetails. By using different sensory modalities, such as voice, hand motions and gestures, product designers can convey design ideas through the VR-basedcomputer-aided design (CAD) system. In this scenario, the multi-sensory interface between human and computer plays a central role with respect to usability, usefulnessand accuracy. The current paper focuses on determining the requirements for the multi-sensory user interface and assessing the applications of different input and outputmechanisms in the virtual environment (VE). In order to evaluate this multi-sensory user interface, this paper formulates the typical activities in product shape design intoa set of requirements for the VR-CAD system. On the basis of these requirements, we interviewed typical CAD users about the effectiveness of using different sensoryinput and output interaction mechanisms such as visual, auditory and tactile. According to the results of these investigations, a nodal network of design activity thatdefines the multi-sensory user interface of the VR-CAD system is determined in the current research. The VR-CAD system is still being developed. However, voicecommand input, hand motion input, three-dimensional visual output and auditory output have been successfully integrated into the current system. Moreover, severalmechanical parts have been successfully created through the VR interface. Once designers use the VR-CAD system that we are currently developing, the interfacerequirements determined in the current paper may be verified or refined. The objectives of the current research are to expand the frontiers of product design and establisha new paradigm for the VR-based conceptual shape design system.
keywords Virtual Reality, Multi-Sensory User Interface, Conceptual Shape Design, Sensory Interaction Mechanism
series journal paper
last changed 2003/05/15 21:33

_id e22d
authors Emprin, G., Girotto, E., Gotta, A., Livi, T. and Luigia, M.Priore
year 1997
title Virtual Studio of Design and Technology on Internet (II): Student's experience
doi https://doi.org/10.52842/conf.ecaade.1997.x.u9k
source Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary For about a year the members of our group have been working on their degree thesis focused on the project of the new intermodal node of Porta Susa in Turin. The theses are concerned with complex urban and architectural problems in the light of the innovations brought by computers and networks. The experience, up to now, makes us conscious that telematics is, and will be, more and more able to offer new tools and different methodologies to approach architectural design. Collaboration across computer networks has improved our design experience with systematic contributions from various skills and methodologies.

The presentation of our still on-going didactic experience has been subdivided into phases, strictly interrelated The first one, almost over, is concerned with the analysis of the area and the representation of the collected data.

keywords CAAD, Teaching of Architectural Design, Shared Virtual Reality, Virtual Design Studio
series eCAADe
more http://info.tuwien.ac.at/ecaade/proc/lvi_i&ii/gotta.html
last changed 2022/06/07 07:50

_id d5b3
authors Knight, Michael and Brown, Andre
year 1999
title Working in Virtual Environments through appropriate Physical Interfaces
doi https://doi.org/10.52842/conf.ecaade.1999.431
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 431-436
summary The work described here is aimed at contributing towards the debate and development relating to the construction of interfaces to explore buildings and their environs through virtual worlds. We describe a particular hardware and software configuration which is derived by the use of low cost games software to create the Virtual Environment. The Physical Interface responds to the work of other researchers, in this area, in particular Shaw (1994) and Vasquez de Velasco & Trigo (1997). Virtual Evironments might have the potential to be "a magical window into other worlds, from molecules to minds" (Rheingold, 1992), but what is the nature of that window? Currently it is often a translucent opening which gives a hazy and distorted (disembodied) view. And many versions of such openings are relatively expensive. We consider ways towards clearing the haze without too much expense, adapting techniques proposed by developers of low cost virtual reality systems (Hollands, 1995) for use in an architectural setting.
keywords Virtual Environments, Games Software
series eCAADe
email
last changed 2022/06/07 07:51

_id cf2011_p093
id cf2011_p093
authors Nguyen, Thi Lan Truc; Tan Beng Kiang
year 2011
title Understanding Shared Space for Informal Interaction among Geographically Distributed Teams
source Computer Aided Architectural Design Futures 2011 [Proceedings of the 14th International Conference on Computer Aided Architectural Design Futures / ISBN 9782874561429] Liege (Belgium) 4-8 July 2011, pp. 41-54.
summary In a design project, much creative work is done in teams, thus requires spaces for collaborative works such as conference rooms, project rooms and chill-out areas. These spaces are designed to provide an atmosphere conducive to discussion and communication ranging from formal meetings to informal communication. According to Kraut et al (E.Kraut et al., 1990), informal communication is an important factor for the success of collaboration and is defined as “conversations take place at the time, with the participants, and about the topics at hand. It often occurs spontaneously by chance and in face-to-face manner. As shown in many research, much of good and creative ideas originate from impromptu meeting rather than in a formal meeting (Grajewski, 1993, A.Isaacs et al., 1997). Therefore, the places for informal communication are taken into account in workplace design and scattered throughout the building in order to stimulate face-to-face interaction, especially serendipitous communication among different groups across disciplines such as engineering, technology, design and so forth. Nowadays, team members of a project are not confined to people working in one location but are spread widely with geographically distributed collaborations. Being separated by long physical distance, informal interaction by chance is impossible since people are not co-located. In order to maintain the benefit of informal interaction in collaborative works, research endeavor has developed a variety ways to shorten the physical distance and bring people together in one shared space. Technologies to support informal interaction at a distance include video-based technologies, virtual reality technologies, location-based technologies and ubiquitous technologies. These technologies facilitate people to stay aware of other’s availability in distributed environment and to socialize and interact in a multi-users virtual environment. Each type of applications supports informal interaction through the employed technology characteristics. One of the conditions for promoting frequent and impromptu face-to-face communication is being co-located in one space in which the spatial settings play as catalyst to increase the likelihood for frequent encounter. Therefore, this paper analyses the degree to which sense of shared space is supported by these technical approaches. This analysis helps to identify the trade-off features of each shared space technology and its current problems. A taxonomy of shared space is introduced based on three types of shared space technologies for supporting informal interaction. These types are named as shared physical environments, collaborative virtual environments and mixed reality environments and are ordered increasingly towards the reality of sense of shared space. Based on the problem learnt from other technical approaches and the nature of informal interaction, this paper proposes physical-virtual shared space for supporting intended and opportunistic informal interaction. The shared space will be created by augmenting a 3D collaborative virtual environment (CVE) with real world scene at the virtual world side; and blending the CVE scene to the physical settings at the real world side. Given this, the two spaces are merged into one global structure. With augmented view of the real world, geographically distributed co-workers who populate the 3D CVE are facilitated to encounter and interact with their real world counterparts in a meaningful and natural manner.
keywords shared space, collaborative virtual environment, informal interaction, intended interaction, opportunistic interaction
series CAAD Futures
email
last changed 2012/02/11 19:21

_id c61f
authors Stellingwerff, M.C.
year 1997
title Changing approaches to the Real World
source Published in the book : 'CAAD - Towards New Design Conventions', Technical University of Bialystok, Poland, Edited by Aleksander Asanowicz and Adam Jakimowicz. ISBN83-86272-63-5.
summary Different kinds of design media change the designers approach to the 'real world' and have an important impact on the design process and its results. Six main directions are described and evaluated: design through contemplation, design by means of traditional media, design using desktop computers, design within a virtual reality environment, design with ubiquitous computers and design through augmented interaction. A number of these directions are still developing in unexpected ways, other directions are established and seem to become less interesting for research and in design. The goal of this paper is to value and characterise each above mentioned direction, relate each direction to 'reality', 'mind' and 'media' and place each of them in a historical / futurological sequence.
keywords design, computers, interaction, reality, mind, media, future
series other
email
more http://www.bk.tudelft.nl/media/papers/approaches.html
last changed 1998/07/08 13:08

_id 63ad
authors Wang, Chao-Jen
year 1999
title Architectural Design Thinking in Virtual Reality
doi https://doi.org/10.52842/conf.caadria.1999.071
source CAADRIA '99 [Proceedings of The Fourth Conference on Computer Aided Architectural Design Research in Asia / ISBN 7-5439-1233-3] Shanghai (China) 5-7 May 1999, pp. 71-80
summary Throughout the history of the development of architectural design, from the use of planar representations to three-dimensional media using prespective and physical models, up to the present application of computer drafting, computer modeling, animation and other new design media, drawing has traditionally been used by designers to carry out the most basic design reasoning. Through discussion by Bridges and Charitos (1997, pp. 143), virtual reality (VR) has become a new design medium used by designers. Given that different media lead to different phenomena in design reasoning (Mitchell, 1990), this paper probes into differences in the attributes of design reasoning derived from traditional drawing and those observed when virtual reality is used to perform design tasks.
series CAADRIA
email
last changed 2022/06/07 07:58

_id e336
authors Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year 1999
title Virtual Reality in the Design Studio: The Eindhoven Perspective
doi https://doi.org/10.52842/conf.ecaade.1999.169
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords Virtual Reality, Design Studio, Student Projects
series eCAADe
email
last changed 2022/06/07 07:54

_id 0c91
authors Asanowicz, Aleksander
year 1997
title Computer - Tool vs. Medium
doi https://doi.org/10.52842/conf.ecaade.1997.x.b2e
source Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary We have arrived an important juncture in the history of computing in our profession: This history is long enough to reveal clear trends in the use of computing, but not long to institutionalize them. As computers peremate every area of architecture - from design and construction documents to project administration and site supervision - can “virtual practice” be far behind? In the old days, there were basically two ways of architects working. Under stress. Or under lots more stress. Over time, someone forwarded the radical motion that the job could be easier, you could actually get more work done. Architects still have been looking for ways to produce more work in less time. They need a more productive work environment. The ideal environment would integrate man and machine (computer) in total harmony. As more and more architects and firms invest more and more time, money, and effort into particular ways of using computers, these practices will become resistant to change. Now is the time to decide if computing is developing the way we think it should. Enabled and vastly accelerated by technology, and driven by imperatives for cost efficiency, flexibility, and responsiveness, work in the design sector is changing in every respect. It is stands to reason that architects must change too - on every level - not only by expanding the scope of their design concerns, but by altering design process. Very often we can read, that the recent new technologies, the availability of computers and software, imply that use of CAAD software in design office is growing enormously and computers really have changed the production of contract documents in architectural offices.
keywords Computers, CAAD, Cyberreal, Design, Interactive, Medium, Sketches, Tools, Virtual Reality
series eCAADe
email
more http://info.tuwien.ac.at/ecaade/proc/asan/asanowic.htm
last changed 2022/06/07 07:50

_id 76ba
authors Bermudez, Julio
year 1997
title Cyber(Inter)Sections: Looking into the Real Impact of The Virtual in the Architectural Profession
source Proceedings of the Symposium on Architectural Design Education: Intersecting Perspectives, Identities and Approaches. Minneapolis, MN: College of Architecture & Landscape Architecture, pp. 57-63
summary As both the skepticism and 'hype' surrounding cyberspace vanish under the weight of ever increasing power, demand, and use of information, the architectural discipline must prepare for significant changes. For cyberspace is remorselessly cutting through the dearest structures, rituals, roles, and modes of production in our profession. Yet, this section is not just a detached cut through the existing tissues of the discipline. Rather it is an inter-section, as cyberspace becomes also transformed in the act of piercing. This phenomenon is causing major transformations in at least three areas: 1. Cyberspace is substantially altering the way we produce and communicate architectural information. The arising new working environment suggests highly hybrid and networked conditions that will push the productive and educational landscape of the discipline towards increasing levels of fluidity, exchanges, diversity and change. 2. It has been argued that cyberspace-based human and human-data interactions present us with the opportunity to foster a more free marketplace of ideologies, cultures, preferences, values, and choices. Whether or not the in-progress cyberincisions have the potential to go deep enough to cure the many illnesses afflicting the body of our discipline need to be considered seriously. 3. Cyberspace is a new place or environment wherein new kinds of human activities demand unprecedented types of architectural services. Rather than being a passing fashion, these new architectural requirements are destined to grow exponentially. We need to consider the new modes of practice being created by cyberspace and the education required to prepare for them. This paper looks at these three intersecting territories showing that it is academia and not practice that is leading the profession in the incorporation of virtuality into architecture. Rafael Moneo's words come to mind. [2]
series other
email
last changed 2003/11/21 15:16

_id c5a0
authors Bradford, J., Wong, W.S., Tang, A.H.F. and Yeung, C.S.K.
year 1997
title A Virtual Reality Building Block Composer for Architecture
doi https://doi.org/10.52842/conf.caadria.1997.051
source CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 51-59
summary Design is a complex and time consuming process. One way to simplify the design process is to use pre-build blocks for commonly known parts instead of creating them again with CAD. To give the designer an immediate 3D view of the design, designing in virtual reality is a good choice. This paper presents a virtual reality interface tool which allows a user to assemble an architecture structure from a library of pre-built blocks. The library is a distributed client-server database.
series CAADRIA
email
last changed 2022/06/07 07:54

_id 848a
authors Caneparo, Luca
year 1997
title Shared Virtual Reality for Architectural Design
source CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 431-442
summary The paper presents the implementation of a system of Shared Virtual Reality (SVR) in Internet applied to a large- scale project. The applications of SVR to architectural and urban design are presented in the context of a real project, the new railway junction of Porta Susa and the surrounding urban area in the city centre of Turin, Italy. SVR differs from Virtual Reality in that the experience of virtual spaces is no longer individual, but rather shared across the net with other users simultaneously connected. SVR offers an effective approach to Computer Supported Collaborative Work, because it integrates both the communicative tools to improve collaboration and the distributed environment to elaborate information across the networks.
series CAAD Futures
email
last changed 2003/05/16 20:58

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 23HOMELOGIN (you are user _anon_622687 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002