Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 520

Reformat results as: short short into frame detailed detailed into frame

_id	bfe9
authors	Suwa, M. and Tversky, B.
year	1997
title	What do architects and students perceive in their design sketches? A protocol analysis
source	Design Studies 18, pp 385-403.
summary	The present research aims at examining what information architects think of and read off from their own freehand sketches, and at revealing how they perceptually interact with and benefit from sketches. We explored this in a protocol analysis of retrospective reports; each participant worked on an architectural design task while drawing freehand sketches and later reported what she/he had been thinking of during the design task. This research lies within the scope of examinations of why freehand sketches as external representation are essential for crystallizing design ideas in early design processes.
series	journal paper
last changed	2003/04/23 15:50

_id	diss_marsh
id	diss_marsh
authors	Marsh, A.J.
year	1997
title	Performance Analysis and Conceptual Design
source	School of Architecture and Fine Arts, University of Western Australia
summary	A significant amount of the research referred to by Manning has been directed into the development of computer software for building simulation and performance analysis. A wide range of computational tools are now available and see relatively widespread use in both research and commercial applications. The focus of development in this area has long been on the accurate simulation of fundamental physical processes, such as the mechanisms of heat flow though materials, turbulent air movement and the inter-reflection of light. The adequate description of boundary conditions for such calculations usually requires a very detailed mathematical model. This has tended to produce tools with a very engineering-oriented and solution-based approach. Whilst becoming increasingly popular amongst building services engineers, there has been a relatively slow response to this technology amongst architects. There are some areas of the world, particularly the UK and Germany, where the use of such tools on larger projects is routine. However, this is almost exclusively during the latter stages of a project and usually for purposes of plant sizing or final design validation. The original conceptual work, building form and the selection of materials being the result of an aesthetic and intuitive process, sometimes based solely on precedent. There is no argument that an experienced designer is capable of producing an excellent design in this way. However, not all building designers are experienced, and even fewer have a complete understanding of the fundamental physical processes involved in building performance. These processes can be complex and often highly inter-related, often even counter-intuitive. It is the central argument of this thesis that the needs of the building designer are quite different from the needs of the building services engineer, and that existing building design and performance analysis tools poorly serve these needs. It will be argued that the extensive quantitative input requirement in such tools acts to produce a psychological separation between the act of design and the act of analysis. At the conceptual stage, building geometry is fluid and subject to constant change, with solid quantitative information relatively scarce. Having to measure off surface areas or search out the emissivity of a particular material forces the designer to think mathematically at a time when they are thinking intuitively. It is, however, at this intuitive stage that the greatest potential exists for performance efficiencies and environmental economies. The right orientation and fenestration choice can halve the airconditioning requirement. Incorporating passive solar elements and natural ventilation pathways can eliminate it altogether. The building form can even be designed to provide shading using its own fabric, without any need for additional structure or applied shading. It is significantly more difficult and costly to retrofit these features at a later stage in a project’s development. If the role of the design tool is to serve the design process, then a new approach is required to accommodate the conceptual phase. This thesis presents a number of ideas on what that approach may be, accompanied by some example software that demonstrates their implementation.
series	thesis:PhD
more	http://www.squ1.com/site.html
last changed	2003/11/28 07:33

_id	63bb
authors	Kokosalakis, J., Brown, G. and Moorhouse, J.
year	1997
title	Incremental Reflective Learning and Innovative Practice in Electronic Design Media
doi	https://doi.org/10.52842/conf.ecaade.1997.x.u1q
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper discusses the impact of a continuously developing CAAD learning strategy, describing in detail a few of these principles, and considering their dynamic impact through deeper more lasting learning, feeding a substantial intensification in the application of Architectural Designing with Computers, changing design methods with interesting analytical and creative results.Aspects of the CAAD teaching discussed include extended collaboration between CAAD and design tutors in defining learning outcomes and tutoring the students’ application of CAAD to design projects, inclusion of CAAD within traditional interim reviews and feedback for design projects and bringing emphasis on conceptual principles, structuring the model and simple programming into earlier stages of the teaching programme and a simple excursion into programming. Studio project examples indicate the interplay between teaching, learning and achievement. Some evidence is explored in greater detail. from the "Interstitial Layers" project utilising the appropriateness of CAAD to store and switch the visibility of spatial data in endless permutations and extensive combinations for mapping, analysing and strategically projecting patterns of city centre activities, fabric and space. Students’ demonstrate a dynamic command of CAAD: as a vehicle for conceptual design, a device to analytically review, criticise and modify the design, as a means to explain design ideas to tutors and to develop and detail final building designs. Reciprocal valuing of quality CAAD achievement between architecture students and staff is seen to be contributing to involvement and motivation, reinforcing striving for equality of achievement. Reference to a further strand of the new methodology considers the impact of tutoring based in researcher findings from video case study precedents of architects practising creative design through use of computers, on a more open, effective development of the architecture students’ own designing processes, culminating in interesting design work.
keywords	Incremental Learning, Understanding, CAAD-Design Approaches, Retention, Feedback, Review, Urban Spatial Forms, Spatial Analysis, "Interstitial Layers", Patterns, Conceptual Electronic Designing, Creative Innovation, Equality and Sharing
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/kokosa/jmup01.htm
last changed	2022/06/07 07:50

_id	2354
authors	Clayden, A. and Szalapaj, P.
year	1997
title	Architecture in Landscape: Integrated CAD Environments for Contextually Situated Design
doi	https://doi.org/10.52842/conf.ecaade.1997.x.q6p
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper explores the future role of a more holistic and integrated approach to the design of architecture in landscape. Many of the design exploration and presentation techniques presently used by particular design professions do not lend themselves to an inherently collaborative design strategy. Within contemporary digital environments, there are increasing opportunities to explore and evaluate design proposals which integrate both architectural and landscape aspects. The production of integrated design solutions exploring buildings and their surrounding context is now possible through the design development of shared 3-D and 4-D virtual environments, in which buildings no longer float in space. The scope of landscape design has expanded through the application of techniques such as GIS allowing interpretations that include social, economic and environmental dimensions. In architecture, for example, object-oriented CAD environments now make it feasible to integrate conventional modelling techniques with analytical evaluations such as energy calculations and lighting simulations. These were all ambitions of architects and landscape designers in the 70s when computer power restricted the successful implementation of these ideas. Instead, the commercial trend at that time moved towards isolated specialist design tools in particular areas. Prior to recent innovations in computing, the closely related disciplines of architecture and landscape have been separated through the unnecessary development, in our view, of their own symbolic representations, and the subsequent computer applications. This has led to an unnatural separation between what were once closely related disciplines. Significant increases in the performance of computers are now making it possible to move on from symbolic representations towards more contextual and meaningful representations. For example, the application of realistic materials textures to CAD-generated building models can then be linked to energy calculations using the chosen materials. It is now possible for a tree to look like a tree, to have leaves and even to be botanicaly identifiable. The building and landscape can be rendered from a common database of digital samples taken from the real world. The complete model may be viewed in a more meaningful way either through stills or animation, or better still, through a total simulation of the lifecycle of the design proposal. The model may also be used to explore environmental/energy considerations and changes in the balance between the building and its context most immediately through the growth simulation of vegetation but also as part of a larger planning model. The Internet has a key role to play in facilitating this emerging collaborative design process. Design professionals are now able via the net to work on a shared model and to explore and test designs through the development of VRML, JAVA, whiteboarding and video conferencing. The end product may potentially be something that can be more easily viewed by the client/user. The ideas presented in this paper form the basis for the development of a dual course in landscape and architecture. This will create new teaching opportunities for exploring the design of buildings and sites through the shared development of a common computer model.
keywords	Integrated Design Process, Landscape and Architecture, Shared Environmentsenvironments
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/szalapaj/szalapaj.htm
last changed	2022/06/07 07:50

_id	598d
authors	Davies, P.
year	1997
title	Case study - Multiprofessional
source	Automation in Construction 6 (1) (1997) pp. 51-57
summary	IT is just a tool, but the most powerful one ever to be offered to us. This case study deals with the areas at which IT can be targeted within the Building Design Partnership. Firstly, should anything be done and if so, what criteria should be used to choose the priorities?A SWOT analysis is one way way to identify goals. Strengths/weeknesses, opportunities/threats are the positive/negative pairs. We have to build our strength and perceive and take opportunities while at the same time countering weaknesses and threats.It is a threat that the industry sets a moving target of IT capability without wanting to meet its cost. It is an opportunity that only a few practices will be at the leading edge and that they will secure the key projects. IT could help us to overcome technical weaknesses and liability and reduce staff and premises costs. It could also increase our exposure to fixed capital costs in a cyclical business. IT could increase the success of integrated practice or it could make it easier for separate firms. We believe the likelihood is that IT will do as it has for financial services and favour the large, multi-national, well prepared and technologically advanced firms. New services will emerge and become assential and will separate the `sheep from the goats.'
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	389b
authors	Do, Ellen Yi-Luen
year	2000
title	Sketch that Scene for Me: Creating Virtual Worlds by Freehand Drawing
doi	https://doi.org/10.52842/conf.ecaade.2000.265
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 265-268
summary	With the Web people can now view virtual threedimensional worlds and explore virtual space. Increasingly, novice users are interested in creating 3D Web sites. Virtual Reality Modeling Language gained ISO status in 1997, although it is being supplanted by the compatible Java3D API and alternative 3D Web technologies compete. Viewing VRML scenes is relatively straightforward on most hardware platforms and browsers, but currently there are only two ways to create 3D virtual scenes: One is to code the scene directly using VRML. The other is to use existing CAD and modeling software, and save the world in VRML format or convert to VRML from some other format. Both methods are time consuming, cumbersome, and have steep learning curves. Pen-based user interfaces, on the other hand, are for many an easy and intuitive method for graphics input. Not only are people familiar with the look and feel of paper and pencil, novice users also find it less intimidating to draw what they want, where they want it instead of using a complicated tool palette and pull-down menus. Architects and designers use sketches as a primary tool to generate design ideas and to explore alternatives, and numerous computer-based interfaces have played on the concept of "sketch". However, we restrict the notion of sketch to freehand drawing, which we believe helps people to think, to envision, and to recognize properties of the objects with which they are working. SKETCH employs a pen interface to create three-dimensional models, but it uses a simple language of gestures to control a three-dimensional modeler; it does not attempt to interpret freehand drawings. In contrast, our support of 3D world creation using freehand drawing depend on users’ traditional understanding of a floor plan representation. Igarashi et al. used a pen interface to drive browsing in a 3D world, by projecting the user’s marks on the ground plane in the virtual world. Our Sketch-3D project extends this approach, investigating an interface that allows direct interpretation of the drawing marks (what you draw is what you get) and serves as a rapid prototyping tool for creating 3D virtual scenes.
keywords	Freehand Sketching, Pen-Based User Interface, Interaction, VRML, Navigation
series	eCAADe
email
more	http://www.uni-weimar.de/ecaade/
last changed	2022/06/07 07:55

_id	ab09
authors	Qaqish, Ra’ed and Hanna, Raid
year	1997
title	The Impact of CAL Strategies on CAD
doi	https://doi.org/10.52842/conf.caadria.1997.475
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 475-489
summary	This paper reports on a two fold study, which examines the impact of CAL on CAD and architectural education, and evaluates the overall effectiveness and efficiency of CAD teaching and strategies in the curriculum of architecture. The study also examined the need for a framework within which the creation of a module for applying CAL in CAD to support the curriculum of architecture can be structured and assessed. The main concern of the study was to explore the range and balance of computer assisted activities in the design studio, and the interpretation of the various roles of the CAD tutor and his/her involvement in delivering these activities. In delivering these activities two criteria, namely: teaching methods and CAD integration (which are interchangeable and yet play different roles), can have a distinct effect on the implementation of CAL in the design studio. The case study evaluated and investigated the CAL the AEC course as part of the 3rd year design studio at Mackintosh School of Architecture, to determine to what extent the AEC learning events were effective in advocating new strategies in CAD. The methods of this investigation consisted of classroom observations and administrating questionnaires. Variables such as the group and gender differences/participation, the tutor’s confidence, level of administration and strategies to help with technical problems and motivations, also the task-related activities, tangibility of the learning materials, and the minutes of lesson have been examined. The global rating of the CAL events in CAD lessons, the CAL organisation and sequence, the level of students’ confidence, the rate of students’ interest, the mode of classroom, the level of learner performance and the relationship between CAL and the overall curriculum have also been empirically examined and their interdependent relationships explored. The findings of this study may help in establishing future directions in adopting some form of effective CAL strategies in CAD. The study also serves as an evaluation tool for computing teaching in the design studio. Furthermore, the checklist used in this case study may also be used in evaluating the different courses in CAD in the curriculum of architectural schools.
series	CAADRIA
last changed	2022/06/07 08:00

_id	dcd2
authors	Salama, A.
year	1997
title	New Trends in Architectural Education: Designing the Design Studio
source	The Anglo-Egyptian Bookstore, Cairo Egypt
summary	New Trends in Architectural Education presents a wide range of innovative concepts and practical methods for teaching architectural design, together with examples of different studio teaching. It traces the roots of architectural education, several disparate ideas, and strategies of design teaching practices including the Ecole Des Beaux-Arts and the Bauhaus. This book offers a comparative analysis of contemporary trends that are committed to shaping and identifying studio objectives and processes. It explores different aspects of studio teaching and what impact they have on attitudes, skills, methods, and tools of designers. New Trends in Architectural Education calls for a fresh look at design education in architecture, where the author proposes an approach within which architectural educators can envision and evaluate the needs of future architects and the type of education that satisfies those needs.
series	other
last changed	2003/04/23 15:14

_id	75a8
authors	Achten, Henri H.
year	1997
title	Generic representations : an approach for modelling procedural and declarative knowledge of building types in architectural design
source	Eindhoven University of Technology
summary	The building type is a knowledge structure that is recognised as an important element in the architectural design process. For an architect, the type provides information about norms, layout, appearance, etc. of the kind of building that is being designed. Questions that seem unresolved about (computational) approaches to building types are the relationship between the many kinds of instances that are generally recognised as belonging to a particular building type, the way a type can deal with varying briefs (or with mixed use), and how a type can accommodate different sites. Approaches that aim to model building types as data structures of interrelated variables (so-called ‘prototypes’) face problems clarifying these questions. The research work at hand proposes to investigate the role of knowledge associated with building types in the design process.Knowledge of the building type must be represented during the design process. Therefore, it is necessary to find a representation which supports design decisions, supports the changes and transformations of the design during the design process, encompasses knowledge of the design task, and which relates to the way architects design. It is proposed in the research work that graphic representations can be used as a medium to encode knowledge of the building type. This is possible if they consistently encode the things they represent; if their knowledge content can be derived, and if they are versatile enough to support a design process of a building belonging to a type.A graphic representation consists of graphic entities such as vertices, lines, planes, shapes, symbols, etc. Establishing a graphic representation implies making design decisions with respect to these entities. Therefore it is necessary to identify the elements of the graphic representation that play a role in decision making. An approach based on the concept of ‘graphic units’ is developed. A graphic unit is a particular set of graphic entities that has some constant meaning. Examples are: zone, circulation scheme, axial system, and contour. Each graphic unit implies a particular kind of design decision (e.g. functional areas, system of circulation, spatial organisation, and layout of the building). By differentiating between appearance and meaning, it is possible to define the graphic unit relatively shape-independent.If a number of graphic representations have the same graphic units, they deal with the same kind of design decisions. Graphic representations that have such a specifically defined knowledge content are called ‘generic representations.’ An analysis of over 220 graphic representations in the literature on architecture results in 24 graphic units and 50 generic representations. For each generic representation the design decisions are identified. These decisions are informed by the nature of the design task at hand. If the design task is a building belonging to a building type, then knowledge of the building type is required. In a single generic representation knowledge of norms, rules, and principles associated with the building type are used. Therefore, a single generic representation encodes declarative knowledge of the building type. A sequence of generic representations encodes a series of design decisions which are informed by the design task. If the design task is a building type, then procedural knowledge of the building type is used.By means of the graphic unit and generic representation, it is possible to identify a number of relations that determine sequences of generic representations. These relations are: additional graphic units, themes of generic representations, and successive graphic units. Additional graphic units defines subsequent generic representations by adding a new graphic unit. Themes of generic representations defines groups of generic representations that deal with the same kind of design decisions. Successive graphic units defines preconditions for subsequent or previous generic representations. On the basis of themes it is possible to define six general sequences of generic representations. On the basis of additional and successive graphic units it is possible to define sequences of generic representations in themes. On the basis of these sequences, one particular sequence of 23 generic representations is defined.The particular sequence of generic representations structures the decision process of a building type. In order to test this assertion, the particular sequence is applied to the office building type. For each generic representation, it is possible to establish a graphic representation that follows the definition of the graphic units and to apply the required statements from the office building knowledge base. The application results in a sequence of graphic representations that particularises an office building design.Implementation of seven generic representations in a computer aided design system demonstrates the use of generic representations for design support. The set is large enough to provide additional weight to the conclusion that generic representations map declarative and procedural knowledge of the building type.
series	thesis:PhD
email
more	http://alexandria.tue.nl/extra2/9703788.pdf
last changed	2003/11/21 15:15

_id	0c91
authors	Asanowicz, Aleksander
year	1997
title	Computer - Tool vs. Medium
doi	https://doi.org/10.52842/conf.ecaade.1997.x.b2e
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	We have arrived an important juncture in the history of computing in our profession: This history is long enough to reveal clear trends in the use of computing, but not long to institutionalize them. As computers peremate every area of architecture - from design and construction documents to project administration and site supervision - can “virtual practice” be far behind? In the old days, there were basically two ways of architects working. Under stress. Or under lots more stress. Over time, someone forwarded the radical motion that the job could be easier, you could actually get more work done. Architects still have been looking for ways to produce more work in less time. They need a more productive work environment. The ideal environment would integrate man and machine (computer) in total harmony. As more and more architects and firms invest more and more time, money, and effort into particular ways of using computers, these practices will become resistant to change. Now is the time to decide if computing is developing the way we think it should. Enabled and vastly accelerated by technology, and driven by imperatives for cost efficiency, flexibility, and responsiveness, work in the design sector is changing in every respect. It is stands to reason that architects must change too - on every level - not only by expanding the scope of their design concerns, but by altering design process. Very often we can read, that the recent new technologies, the availability of computers and software, imply that use of CAAD software in design office is growing enormously and computers really have changed the production of contract documents in architectural offices.
keywords	Computers, CAAD, Cyberreal, Design, Interactive, Medium, Sketches, Tools, Virtual Reality
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/asan/asanowic.htm
last changed	2022/06/07 07:50

_id	8818
authors	Donath, Dirk and Petzold, Frank
year	1997
title	From Digital Building Surveying to an Information System
doi	https://doi.org/10.52842/conf.ecaade.1997.x.a6v
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	This paper describes the development of a software concept and a prototype system for a structured way of collecting and organising information about existing buildings. An analysis of traditional methods and processes involved in architectural surveying forms the basis for the development of a programming system for the structured surveying, preparation, organisation and use of digital information about existing architectural objects. Use is made throughout of current tools and techniques in the field of applied informatics, and these in turn are evaluated as to their suitability and usefulness. Particular emphasis is given to the systematic breakdown of a building into its component parts and information relevant to its use and planning, and to the integration of different methods of capture and presentation of this information. The architects' normal working methods inform the entire process.
keywords	Building Surveying, Information System, CAAD, Surveying Techniques
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/donath/donath.htm
last changed	2022/06/07 07:50

_id	c59c
authors	Kokosalakis, Jen
year	1997
title	C AD VANTAGE for Communities, Professionals and Students
source	AVOCAAD First International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-01-09] Brussels (Belgium) 10-12 April 1997, pp. 235-254
summary	I propose to consider how added value for professionals, and the consumers of their buildings and students of these processes might be attained. Through the vehicle of new technologies including the humble 'CAD' system a fuller collaboration in design decision- making is aided through representation of 3 dimensional design ideas and their comprehension from different 'vantage' points. Thus computing may enhance opportunity for more informed dialogue involving verbal and visual responses between the intentions of the architect and client and promise to open up more of the architectural design process to participation by the building consumers, bringing advantage' to all actors in the design process. More liberated sketching at the system is becoming evident as programmers, and users' skills adapt to the search for more enabling, creative and easier tools, procedures and interfaces freeing responsiveness to consumer wishes. Reflection from clients and practitioners brings hope that a more informed dialogue is enabled through computer supported designing. The beginnings of CAAD support to community groups acts as a facilitator. Contacting and working with community groups follows effective 'Community Development' precedents established in the Liverpool of the sixties; to contact, activate, enable and provide necessary skill supports for community-driven striving for resolution of housing problems. Results of this, ploughed back into CAD teaching for Environmental Planners, brings increased awareness and visualisation of environmental, architectural and human issues and promises to begin a new cycle of more informed participation for citizens, architects, planners and consultants.
series	AVOCAAD
last changed	2005/09/09 10:48

_id	6cb4
authors	Leupen, B., Grafe, C., Körnig, N., Lampe, M. and De Zeeuw, P.
year	1997
title	Design and Analysis
source	New York: Van Nostrand Reinhold
summary	Design and Analysis by Bernard Leupen, Christoph Grafe, Nicola Körnig, Marc Lampe, and Peter de Zeeuw Design and Analysis is an insightful, interdisciplinary exploration of the diversity of analytic methods used by architects, designers, urban planners, and landscape architects to understand the structure and principles of the built environment. Developed by a team headed by Bernard Leupen at Delft University of Technology, The Netherlands, Design and Analysis defies borders of history, geography, and discipline, tracing the evolution of design principles from ancient Greece to the 20th century. "Only methodical analysis gives us an insight into the design process," states architect Bernard Tschumi. Using historical examples from architecture, urban design, and landscape architecture, Design and Analysis defines an ordered system that enables the design student or professional to identify the factors that influence designers' decisions, and shows how to relate them to the finished project. Design and Analysis is organized into six chapters that correspond to these factors: order and composition, functionality, structure, typology, context, and analytical techniques. The authors introduce the analytical drawing as a time-tested means to obtaining insight into the design process. Over 100 line drawings are featured in all. Using contemporary architectural examples to teach ancient design principles, Design and Analysis is more than just an introduction to analytical methods. The authors give an outline of space design as a whole, from individual buildings to urban and landscape ensembles. Though primarily intended for design students to help them appreciate many of the issues that they will face as professionals, Design and Analysis's broad, easy-to-read approach makes it an invaluable handbook for designers of all disciplines.
series	other
last changed	2003/04/23 15:14

_id	ab84
authors	Li, Thomas S.P. and Will, Barry F.
year	1997
title	A Computer-Aided Evaluation Tool for the Visual Aspects in Architectural Design for High-Density and High- Rise Buildings
source	CAAD Futures 1997 [Conference Proceedings / ISBN 0-7923-4726-9] München (Germany), 4-6 August 1997, pp. 345-356
summary	The field of view, the nature of the objects being seen, the distances between the objects and the viewer, daylighting and sunshine are some major factors affecting perceived reactions when viewing through a window. View is one major factor that leads to the satisfaction and comfort of the users inside the building enclosure. While computer technologies are being widely used in the field of architecture, designers still have to use their own intelligence, experience and preferences in judging their designs with respect to the quality of view. This paper introduces an alternative approach to the analysis of views by the use of computers. The prototype of this system and its underlying principles were first introduced in the C A A D R I A 1997 conference. This paper describes the further development of this system where emphasis has been placed on the high- rise and high-density environments. Architects may find themselves facing considerable limitations for improving their designs regarding views out of the building under these environmental conditions. This research permits an interactive real-time response to altering views as the forms and planes of the building are manipulated.
series	CAAD Futures
email
last changed	2001/05/27 18:39

_id	4ec6
authors	Richens, P.
year	1997
title	Computer-aided Art Direction
source	F. Penz and M. Thomas (Eds.) , Cinema & Architecture: Méliès, Mallet-Stevens, Multimedia, British Film Institute, London
summary	Computer-aided design for architects began to be possible about 25 years ago; in the last five it has become commonplace. In a few years time, it will be as ubiquitous as the word-processor is today. But the construction industry as a whole is not a sophisticated user of Information Technology. The state of affairs in the film industry is quite different; computer graphics of the utmost sophistication plays an increasingly important part in the production of film, but very little in their design. Is it possible that an opportunity is being missed? This paper is written from the standpoint of a designer of architectural CAD software, and seeks to explore the extent to which computer graphics techniques, which have proved useful in architecture, could be used in Production Design, and the simulation of Cinematography. Several experiments, using commercial software of the sort that architects find useful, have lead to the realisation that much is possible, but that a full realisation of the benefits would require software specially adapted to the task. The bulk of this paper describes the nature of this adaptation; it is in the nature of a preliminary specification for software for Computer-aided art direction. The initial investigation centred on the needs of film students; it has since broadened to look at the needs of established practitioners.
series	other
email
more	http://www.arct.cam.ac.uk/research/pubs/pdfs/rich97a.pdf
last changed	2003/03/05 13:10

_id	e43a
authors	Richens, P.
year	1997
title	Beyond Photorealism
source	Architects’ Journal, 12/6/97
summary	Computer rendering has come a long way in the last twenty years. But is it going in the right direction? Is the glossy photo-realistic image the only goal worth pursuing? And does the process of making it contribute enough to the design, or the ongoing dialogue with the client? There certainly are alternative modes of image-making. Frank Lloyd Wright, according to legend, could conceive a whole building in his head, and set it down rapidly, in plan and section. He would leave these drawings overnight to his assistant, who would set up a perspective. In the morning, FLW would spend an hour or two completing the rendering, ready for a lunch-time meeting with his clients. Today, many architects use their computers in the same way as FLW used his night-staff, to set-up an outline perspective, over which a rendering is produced by hand. Students, we observe, will often attempt to complete the rendering using a paint program such as Photoshop to apply textures and entourage in a kind of electronic collage.
series	journal paper
email
more	http://www.arct.cam.ac.uk/research/pubs/html/rich97c/
last changed	2003/05/15 21:45

_id	2a09
authors	Donath, Judith Stefania
year	1997
title	Inhabiting the virtual city : the design of social environments for electronic communities
source	Massachusetts Institute of Technology, Program in Media Arts & Sciences
summary	The goal of this work is to develop an approach to the design of on-line social environments. My thesis is that, in order to foster the development of vibrant and viable online communities, the environment - i.e. the technical infrastructure and user interface - must provide the means to communicate social cues and information: the participants must be able to perceive the social patterns of activity and affiliation and the community must be able to evolve a fluid and subtle cultural vocabulary. The theoretical foundation for the research is drawn from traditional studies of society and culture and from observations of contemporary on-line systems. Starting with an analysis of the fundamental differences between real and virtual societies - most notably, the presence and absence of the body - the first section examines the ways social cues are communicated in the real world, discusses the limits imposed on on-line communities due to their mediated and bodiless nature, and explores directions that virtual societies can take that are impossible for physical ones.These ideas form the basis for the main part of the thesis, a design platform for creating sociable virtual environments. The focus of the discussion is on the analysis of a set of implemented design experiments that explore three areas of the platform: the visual representations of social phenomena, the role of information spaces as contexts for communication, and the presentation of self in the virtual world.
series	thesis:PhD
email
more	http://smg.media.mit.edu/people/Judith/Thesis/
last changed	2003/02/12 22:37

_id	02c5
authors	Lin, Feng Tyan and Wang, Hung Hsiang
year	1997
title	A Case Study of Cooperative Design Using Video Conference
doi	https://doi.org/10.52842/conf.caadria.1997.153
source	CAADRIA ‘97 [Proceedings of the Second Conference on Computer Aided Architectural Design Research in Asia / ISBN 957-575-057-8] Taiwan 17-19 April 1997, pp. 153-162
summary	In this case study we observed an experimental cooperative design project: a parking lot design using a video conference system. Twelve graduate students of planning and design were divided into two teams for landscape design and traffic planning. They used ProShareTM, a computer-supported video conference system, to co-design at two separate rooms. We used video equipment to record this conference for a detailed analysis. Some experiences on using this system are described. The results indicate the relationships within the work organization, physical workplace and cooperative design. We argued that this workplace becomes more important, even though much research has put emphasis on the cyberspace in cooperative design. The team members’ tacit protocol has importance, but it does not guarantee any resolution of conflicts. This cooperative design is not only a social process, but also a logic of iterative verifications and falsifications. It is dangerous to construct a theory of computer-supported cooperative design simply based on this case study; however, such an observation could be the first step towards the theory.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0992
authors	Belibani, R. and Gadola, A.
year	1997
title	On Digital Architecture
doi	https://doi.org/10.52842/conf.ecaade.1997.x.r1n
source	Challenges of the Future [15th eCAADe Conference Proceedings / ISBN 0-9523687-3-0] Vienna (Austria) 17-20 September 1997
summary	One of the main aims of this research was to highlight the influence of computer as a designing tool. Their wide acceptance as drawing tools might occult the importance of their role in architectural design. We will try to apprehend, with the help of synthetic images, that computers mark a historic step forward in drawing and representation, as well as a major progress in the understanding of creative processes. Together these features offer a broader horizon to architectural design. New source of inspiration can be found in virtual reality that makes visible what does not really exist, permitting design to suggest itself with its primordial image. We mean a kind of architectural imprint, where the first three-dimensional lines suggest in some way the designer with their shape, and encourage the definition process. Through the visualisation of some images, it is possible to show the modifications of language and style, to examine the transformation modalities of the design process and to propose an essay of the new methods to communicate architecture.
series	eCAADe
email
more	http://info.tuwien.ac.at/ecaade/proc/belibani/belibani.htm
last changed	2022/06/07 07:50

For more results click below: