Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 554

Reformat results as: short short into frame detailed detailed into frame

_id	074a
authors	Gross, M.D., Do, E.Y., McCall, R.J., Citrin, W.V., Hamill, P., Warmack, A. and Kuczun, K.S.
year	1998
title	Collaboration and coordination in architectural design: approaches to computer mediated team work
source	Automation in Construction 7 (6) (1998) pp. 465-473
summary	The paper reports on three projects at our laboratory that deal respectively with synchronous collaborative design, asynchronous collaborative design, and design coordination. The Electronic Cocktail Napkin and its mobile extension that runs on hand-held computers supports synchronous design with shared freehand drawing environments. The PHIDIAS hypermedia system supports long-term, asynchronous collaboration by enabling designers of large complex artifacts to store and retrieve rationale about design decisions and the Construction Kit Builder (CKB) supports team design by supporting a priori agreements among team members to avoid conflicts.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	b796
authors	Krishnamurthy, B.K., Tserng, H.-P., Schmitt, R.L., Russell, J.S., Bahia, H.U. and Hanna, A.S.
year	1998
title	AutoPave: towards an automated paving system for asphalt pavement compaction operations
source	Automation in Construction 8 (2) (1998) pp. 165-180
summary	Asphalt pavement density from roller compaction is a crucial factor in ensuring satisfactory pavement performance. Proper and uniform compaction of the pavement mat is essential in achieving the desired final compacted density. There is a necessity to investigate existing pavement construction practices, and provide more cost-effective modifications to the current scenario. Automation of the paving operation can increase the efficiency and quality of the operation, lead to reductions in overall project costs and time, and enhance pavement life. A system can be developed through algorithmic planning and real-time guidance strategies, and the development of a semi-automated path-planning and real-time guidance system that aims towards automating the paving operation. This system accepts relevant paving project inputs, generates appropriate path plans for the compactor, performs a graphical visualization of the generated path plan, and offers real-time guidance capabilities using Global Positioning Systems (GPS) technology. This system, named AUTOPAVE (v1.0), was developed in Microsoft Visual Basic™ programming language and offers a user-friendly and interactive graphical interface. The proposed new system will incorporate state-of-the-art GPS technology to standardize paving operations that are more amenable to rigorous quality control, and can result in considerable reductions in cost and time involved in asphalt pavement construction projects. This system was tested on several actual paving projects, and many operational issues related to the functioning of the system were successfully overcome.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	1beb
authors	Coomans, M.K.D. and Timmermans, H.J.P.
year	1998
title	A VR User Interface for Design by Features
source	Timmermans (ed.) Proceedings of the 4th Conference on Design and Decision Support Systems in Architecture and Urban Planning, Maastricht
summary	We present the design of a Virtual Reality based user interface (VR-UI). It is the interface for the VR-DIS system, a design application for the Building and Construction industry (VRDIS stands for Virtual Reality - Design Information System). The interface is characterised by a mixed representation of the task domain: an analogue "mock-up view" is being integrated with a descriptive "feature view". It uses a Fish Tank VR configuration which integrates the virtual objects in the designer's normal working environment. The issues underlying the design of the feature view are discussed, as well as the choice of input devices.
series	other
last changed	2003/04/23 15:50

_id	ddss9812
id	ddss9812
authors	Coomans, M.K.D. and Timmermans, H.J.P.
year	1998
title	A VR-User Interface for Design by Features
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	We present the design of a Virtual Reality based user interface (VR-UI). It is the interface for the VR-DIS system, a design application for the Building and Construction industry (VRDIS stands for Virtual Reality - Design Information System). The interface is characterised by a mixedrepresentation of the task domain: an analogue “mock-up view” is being integrated with a descriptive “feature view”. It uses a Fish Tank VR configuration which integrates the virtual objects in the designer’s normal working environment. The issues underlying the design of the feature view are discussed, as well as the choice of input devices.
series	DDSS
last changed	2003/08/07 16:36

_id	b335
authors	Bayle, E., Bellamy, R., Casaday, G., Erickson, T., Fincher, S., Grinter, B., Gross, B., Lehder, D., Marmolin, H., Moore, B., Potts, C., Skousen, G. and Thomas, T.
year	1998
title	Putting It All Together: Towards a Pattern Language for Interaction Design Reports
source	ACM SIGCHI Bulletin 1998 v.30 n.1 pp.17-23
summary	Pattern languages are representations that have been used in architecture and urban design for about twenty years. They focus on the interaction between physical form and social behavior, and express design solutions in an understandable and generalizable form. But pattern languages are not simply set of patterns intended to be universally applied; instead, they are actually meta-languages which, when used in a particular situations, generate situated design languages. This report describes a CHI 97 workshop which explored the utility of pattern languages for interaction design. We discuss the workshop's rationale, the structure and process of the workshop, and some of the workshop's results. In particular, we describe some patterns developed as part of the workshop, and our consequent reflections on the use of patterns and pattern languages as lingua franca for interaction design. This report concludes with a bibliography on pattern languages and related matters that spans architecture, software design, and organizational design.
series	other
last changed	2002/07/07 16:01

_id	c721
authors	Dauner, J., Landauer, E. and Fraunhofer, I.
year	1998
title	3D Product Presentation Online: The Virtual Design Exhibition
source	VRML 98 - Third Symposium on the Virtual Reality Modeling Language. S. N. Spencer. Monterey, CA, ACM: 57-62
summary	VRML offers a high potential for product presentation: Instead of regarding flat, static pictures, configurable and animated 3D models embedded in entertaining environments provide a new way of product presentation. But seriously using VRML for this application domain means facing several challenges. We discuss these issues by using the Virtual Design Exhibition as a showcase. In this exhibition seven interior design companies show products with high aesthetic quality. We discuss how these aesthetics influence the VRML presentation and give some guidelines resulting from our experience. CR Categories and Subject Descriptors: H.5.1 [Information Interfaces and Presentation] Multimedia Information; Systems - Artificial realities H.5.2 [Information Interfaces and Presentation] User Interfaces - Screen design; I.3.6 [Computer Graphics] Methodology and Techniques - Interaction techniques
series	other
last changed	2003/04/23 15:50

_id	07d8
authors	Garza, J.M. de la and Howitt, I.
year	1998
title	Wireless communication and computing at the construction jobsite
source	Automation in Construction 7 (4) (1998) pp. 327-347
summary	For many years, the walkie-talkie has been synonymous with the construction industry. During jobsite project execution, there are three variables which can either hinder or facilitate successful results, namely, quality, quantity, and timing of information. Wireless data communications technology is capable of delivering just-in-time information within the `last mile' between the trailer and a desired location on the jobsite. This paper reports on a study which surveyed information needs at the jobsite, emerging wireless data communications technology, and assessed the extent to which wireless data technology can fulfill the information needs of the jobsite [J.M. de la Garza, I. Howitt, Wireless communication and computing at the jobsite, Research Report 136-11, Construction Industry Institute, Austin, TX, 1997]. We have organized jobsite information needs into the following ten categories: (a) requests for information, (b) materials management, (c) equipment management, (d) cost management, (e) schedule and means and methods, (f) jobsite record keeping, (g) submittals, (h) safety, (i) QC/QA, and (k) future trends. Each category was analyzed in terms of its appropriateness to take advantage of wireless technology. The four formats considered to transmit information wirelessly were: (a) live voice, (b) live video, (c) batched data, and (d) live data. Current wireless communication technology has been classified into the following five classes: (a) circuit-switched wireless data systems, (b) packet-switched wireless data systems––this class was further subdivided into specialized mobile radio systems and cellular digital packet data systems, (c) wireless local area networks, (d) paging systems, and (e) satellite-based data communications. A primer for wireless communications covering both fundamental and advanced communications concepts has also been included to enable a better understanding of the issues involved in making trade-offs while configuring a wireless jobsite communication system. The example presented in this paper shows how a contractor can define a subset of information needs by choosing from those already articulated herein and determine if a given wireless technology should even be considered as a viable way of meeting the information needs that such company has.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	sigradi2007_af13
id	sigradi2007_af13
authors	Granero, Adriana Edith; Alicia Barrón; María Teresa Urruti
year	2007
title	Transformations in the educational system, Influence of the Digital Graph [Transformaciones en el sistema educacional, influencia de la Gráfica Digital]
source	SIGraDi 2007 - [Proceedings of the 11th Iberoamerican Congress of Digital Graphics] México D.F. - México 23-25 October 2007, pp. 182-186
summary	The educative proposal was based on the summary attained through experiences piled up during the 2 last semester courses, 2/2006-1/2007. This proposal corresponds to a mix of methodology (by personal attendance / by internet). Founding on the Theory of the Game (Eric Berne 1960) and on different theories such as: Multiple intelligences (Haward Gardner 1983), Emotional Intelligence (Peter Salowey and John Mayer 1990, Goleman 1998), Social Intelligence (Goleman 2006), the Triarchy of Intelligence (Stemberg, R.J. 1985, 1997), “the hand of the human power”, it´s established that the power of the voice, that of the imagination, the reward, the commitment and association produce a significant increase of the productivity (Rosabeth Moss Kanter 2000), aside from the constructive processes of the knowledge (new pedagogical concepts constructivista of Ormrod J.E. 2003 and Tim O´Reilly 2004).
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	9951
authors	Johnson, R.E. and Clayton, M.J.
year	1998
title	The impact of information technology in design and construction: the owner's perspective
source	Automation in Construction 8 (1) (1998) pp. 3-14
summary	This paper reports on findings of a November 1996 exploratory survey of architecture–engineering clients (Fortune 500 corporate facility managers). This research investigated how the practices of corporate facility managers are being influenced by rapid changes in information technology. The conceptual model that served as a guide for this research hypothesized that information technology acts as both an enabler (that is, information technology provides an effective mechanism for managers to implement desired changes), as well as a source of innovation (that is, new information technology innovations create new facility management opportunities). The underlying assumption of this research is that information technology is evolving from a tool that incrementally improves `back-office' productivity to an essential component of strategic positioning that may alter the basic economics, organizational structure and operational practices of facility management organizations and their interactions with service providers (architects, engineers, and constructors). The paper concludes with a discussion of researchable issues.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c38b
authors	Kunz, J.C., Christiansen, T.R., Cohen, G.P., Jin, Y. and Levitt, R.E.
year	1998
title	The Virtual Design Team
source	Communications of The ACM, Vol. 41, No. 11, November, 1998
summary	The long range goal of the Virtual Design Team" (VDT) research program is to develop computational tools to analyze decision making and communication behavior and thereby to support true organizational (re)engineering. This article introduces the underlying theory, the implementation of the theory as a computational model, and results from industrial test cases. Organization theory traditionally describes organizations only at an aggregate-level, describing and predicting the behavior of entire organizations in terms of general qualitative predictions. We define and implement a "micro" theory of the structure and behavior of components of organizations, explicitly representing activities, groups of people called "actors," and organizational structure and policies for project teams. A VDT model can be "run" by a discrete event simulation. Emergent aggregate model output behaviors include the predicted time to complete a project, the total effort to do the project, and a measure of process quality. More detailed model behaviors include the time-varying backlog of individual actors and the "exceptions" associated with activities. The results are detailed and specific, so they can guide specific managerial interventions in a project team and can support sensitivity studies of the relative impact of different organizational changes. We conclude that such a theory is tractable and predictive for complex but relatively routine, project-oriented design tasks. The application for which VDT offers unique new kinds of insights is where an organization is striving to shrink time to market dramatically for a product that is similar to ones it has previously developed. Reducing time to market dramatically almost always requires that previously sequential activities are executed more concurrently. In this situation, experienced managers can still correctly identify the required activities and estimate their durations and skill requirements; but they almost always underestimate the increased workload arising from exponentially higher coordination needs and the propagation of rework between the now highly concurrent activities. The VDT framework, which explicitly models information dependency and failure propagation between concurrent activities, has proven to be far more accurate, and to incorporate a wider range of parameters, than CPM/PERT process models for these fast-paced development projects."
series	journal paper
last changed	2003/04/23 15:50

_id	7561
authors	Streitz, N. A., Gei_ler, J. and Holmer, T.
year	1998
title	Roomware for Cooperative Buildings: Integrated Design of Architectural Spaces and Information Spaces
source	N.A. Streitz, S. Konomi, and H-J Burkhardt (eds), Cooperative Buildings: Integrating Information, Organization, and Architecture, Proceedings of CoBuild‘98, Springer, pp. 4-21
summary	In this paper, we introduce the concepts of "cooperative buildings" and "roomware" and place them in the context of the integrated design of real, physical, resp. architectural spaces and virtual, resp. digital information spaces. By "roomware" we mean computer-augmented things in rooms, like doors, walls, furniture, and others. The general approach is detailed via examples from the i-LAND project where we develop several "roomware" components in order to realize an interactive information and cooperation landscape, e.g. an innovative work environment for creativity teams. We describe the current realization of i-LAND which includes an interactive electronic wall, an interactive table, computer-augmented chairs, and a mechanism for assigning physical objects as representatives of information objects in the virtual world.
series	other
last changed	2003/04/23 15:50

_id	ddss9859
id	ddss9859
authors	Tonarelli, P., Delaporte, J.L., Tahon, C.
year	1998
title	Geographical and logistical Information System for building management
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Nowadays, most of building managers (e.g., companies, local communities, government agencies) have to face up a common set of problems. For instance, these problems are a deficient knowledge of ancient buildings and networks (e.g., gas, water), an inefficient management of green spaces, ora lack of communication between users (e.g., technical staff, suppliers, building end users). In addition, building and spaces to be managed may be shared among several distant areas. LAMIH works aim to achieve methodologies and computer tools for building management andassociated logistic. These works include two aspects we present in this paper:- a methodological one: the establishment of a project business plan, applied to building and logistic management,- a computer aspect: the design and implementation of a decision and management support system, the Geographical and Logistical Information System (G.L.I.S.). The project business plan includes the creation of a task force which has to lead the project and the description of the project plan.The G.L.I.S. is a software set which uses shared database. In particular, this set allows the different users to:- manage a patrimony as a whole, with the help of a Geographical Information System,- manage buildings and networks,- improve communication and logistic aspects with the help of a groupware tool. We present the achievement of these methodology and tools as part of a particular area: theUniversity of Valenciennes which is shared among four towns. The project takes into account existing buildings and those to be built, spaces which separates them, and the relationships betweenthe four different sites of the University. A task force is created as well as a specialised service, the Building Management Department. This department represents an interface between the task force,the LAMIH, and a centre of Information Technologies in construction (CERTIC) which is created as part of the SCENIC project (Support Centres Network for IT in Construction, Esprit project 21772).
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9821
id	ddss9821
authors	Varghese, G., Dhingra, S.L. and Sikdar, P.K.
year	1998
title	The Role of Expert Systems, and RDBMS Strategies in a DSSfor Urban Bus Transport Management
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Efficient and well-managed urban bus transport systems supported by information systems with decision support capabilities developed within the framework of an advanced Relational Data Base Management System (RDBMS) can provide critical information at the right moment and assisttransport managers in conducting performance evaluations. This paper includes discussions on the use of the entity-relationship (E-R) model (a semantic data modeling technique) in the development of thestructure of the conceptual database for the information system planned to be implemented using RDBMS. The E-R data modeling approach enables database designers in obtaining the third normal forms of related databases for the efficient functioning of the information system. The inportance of decision tables in the development of DSS modules using Expert System shells are also discussed. The DSS modules will assist transport managers in the analysis of operational performance for bus depots or the organization as a whole. The E-R diagrams generated and the decision files developed will serve as important documents that can enhance the adaptability of the DSS to the changing needs ofthe organizations. The conceptualization of the information system to support decision-making in an RDBMS framework provides the advantage of a very low 'disk seek' time and facilitates frequent generation of reports.
series	DDSS
last changed	2003/08/07 16:36

_id	bb72
authors	Bourdot, P., Krus, M., Gherbi, R.
year	1998
title	Cooperation Between Reactive 3D Objects and a Multimodal X Window Kernel for CAD
source	Bunt, H., Beun, R.J., Borghuis, T. (Eds.). Multimodal Human-Computer Communication : Systems, Techniques, and Experiments. Berlin : Springer
summary	From the early steps of sketching to final engineering, a frequent and very important activity in designing objects is to perform graphical and spatial simulations to solve the constraints on the objects which are being designed. But when we analyse work situations involving the use of CAD systems, it is today an acknowledged fact that these tools are not helpful to perform these types of simulations. While knowledge modeling based on form feature concepts already offers some possibilities for attaching behaviour to objects, the simulation activity requires in addition a `real time' and `intelligent' management of the interactions between the 3D virtual objects and the CAD user. Our general purpose is to study how future CAD systems could be improved to achieve the simulation steps of object design. In this context we present some issues concerning the cooperation between a model of reactive 3D objects and a multimodal X Window kernel. We have developed a prototype of a system where objects with reactive behaviour can be built, and with which the user can interact with a combination of graphical actions and vocal commands. This prototype is used to evaluate the feasability and the usefulness of the integration of such techniques in futur applications that would be used by object designers in a real working context. We describe the current state of this system and the planned improvements.
series	other
last changed	2003/11/21 15:16

_id	14fb
authors	Tah, J.H.M., Howes, R. and Losifidis, P.
year	1998
title	Information Modelling and Sharing in the CO-CIS Project
source	The Int. Journal of Construction IT 6(2), pp. 67-85
summary	Complex information structures are generated and exchanged during the life cycle of large projects. The key to realising improved collaboration amongst the several disciplines involved is in the integration of such structures. Object-orientation has emerged as an appropriate approach for handling the complexity inherent in construction domains. This paper presents a pure object-oriented Integrated Building Project Model (IBPM). The model is a definition of objects and relationships that pertain to the three different construction-related disciplines of architecture, structural engineering and project management. It provides the basis by which software applications can share objects and a means of achieving integration. From the IBPM, the notion of Intelligent Object Classes (IOCs) is introduced, leading to the COllaborative Construction Integrated System (CO-CIS), the development of which is described in terms of its generic conceptual architecture. The exploitation of the architecture in a prototype implementation of the IBPM and IOCs is demonstrated by the generation of construction schedules through the integration of CAD and project management packages.
series	journal paper
last changed	2003/05/15 21:45

_id	fbde
authors	Veeramani, D., Tserng, H.P. and Russell, J.S.
year	1998
title	Computer-integrated collaborative design and operation in the construction industry
source	Automation in Construction 7 (6) (1998) pp. 485-492
summary	The construction industry is emerging as the next frontier for computer-integrated technologies, just as the manufacturing industry did 25 years ago. More recently, the emergence of Internet–Intranet technologies is creating new mechanisms for collaborative design and operation that were previously impossible. The advances that have occurred in the manufacturing industry in the areas of collaborative design, intelligent process planning and computer-integrated manufacturing provide significant insights for formulating analogous paradigms for computer-integrated construction. However, in many aspects, the development of enabling technologies (for design, operation and decision-making) to achieve this transformation in the construction industry is not as trivial as repackaging existing technologies and tools that have been developed for the manufacturing industry. In this paper, we draw attention to some of the significant research opportunities and challenges that exist in these areas of collaborative design and computer-integrated construction, and outline some related researches at the University of Wisconsin-Madison.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	ee24
authors	Chien, S.-F., Magd, D., Snyder, J. and Tsa, W.-J.
year	1998
title	SG-Clips: A System to Support the Automatic Generation of Designs From Grammars
doi	https://doi.org/10.52842/conf.caadria.1998.445
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 445-454
summary	SG-CLIPS is a computer tool that supports the automatic generation of designs from a predefined set of grammar rules that encapsulate the composition principles of a certain style of design. It is an open system that accepts any grammar conforming to the conventions described in this paper. We demonstrate the system through an example and discuss the relation to shape grammars and limitations.
keywords	Generative Systems, Shape Grammars, Rule-based Design Tools, CLIPS
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:55

_id	e679
authors	Seichter, H., Donath, D. and Petzold, F.
year	2002
title	TAP – The Architectural Playground - C++ framework for scalable distributed collaborative architectural virtual environments
doi	https://doi.org/10.52842/conf.ecaade.2002.422
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 422-426
summary	Architecture is built information (Schmitt, 1999). Architects have the task of restructuring and translating information into buildable designs. The beginning of the design process where the briefing is transformed into an idea is a crucial phase in the design process. It is where the architect makes decisions which influence the rest of the design development process (Vries et al., 1998). It is at this stage where most information is unstructured but has to be integrated into a broad context. This is where TAP is positioned – to support the architect in finding solutions through the creation of spatially structured information sets without impairing thereby the creative development. We want to enrich the inspiration of an architect with a new kind of information design. A further aspect is workflow in a distributed process where the architect’s work becomes one aspect of a decentralised working patterns. The software supports collaborative work with models, sketches and text messages within an uniform surface. The representations of the various media are connected and combined with each other and the user is free to combine them according to his or her needs.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	b9c2
authors	Bhavnani, S.K. and John, B.E.
year	1998
title	Delegation and Circumvention: Two Faces of Efficiency
source	Proceedings of CHI'98 (1998), 273-280
summary	Throughout history, inefficient methods to use devices have been replaced by more efficient ones. This shift typically occurs when users discover how to &legate work to the powers of a tool, and to circumvent its liiitations. Strategies of delegation and circumvention, therefore, appear to be the core of efficient use. To show how this approach can expiain the relationship between tools and strategies in complex computer systems, we describe five ways to perform a real-world drawing task with current as well as 5.rture tools. We then present five corresponding GOMS models that demonstrate the value of efficient strategies when compared to the observed behavior of a professional CAD user. We conclude by presenting a generalized framework to characterize efficient strategies and discuss its relevance to design and training.
keywords	Strategies; GOMS; Efficiency; Productivity
series	other
email
last changed	2003/11/21 15:16

_id	ba7c
authors	Cox, D.A. and Chugh, J.S. (et al.)
year	1998
title	The Usability of Transparent Overview Layers
source	CHI 98: 301-302
summary	Viewports into large visual workspaces are sometimes supplemented by a separate window that displays a miniaturized overview of the entire workspace. Instead of this separate window, we have layered a transparent version of the overview atop the viewport. Because the overview fills the display, it becomes the largest size possible. An exploratory study indicates that people can use this unusual system, where they switch between layers when performing a construction task.
series	other
last changed	2003/04/23 15:50

For more results click below: