Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 549

Reformat results as: short short into frame detailed detailed into frame

_id	88c3
authors	Koshak, Nabeel A. and Gross, Mark D.
year	1998
title	3D Modeling of Historic Makkah - Strategies for Constructing Accurate CAD Models of Historic Buildings
doi	https://doi.org/10.52842/conf.caadria.1998.103
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 103-112
summary	In this paper, we outline the problem of historic preservation and the opportunities that rigorous CAD models provide to address it, describe the particular class of buildings in Makkah that we are concerned with, and discuss a modeling strategy that takes advantage of common elements, symmetry and repetition in the buildings' construction, and standard operations in current CAD programs. We briefly discuss tools for architectural heritage recording, construction of CAD models of historic buildings, and systematic analysis of built form. Finally, the paper shows how the method can streamline the construction of accurate CAD models.
keywords	Electronic Design Media, Rapid Prototypes, Scene and Product Modeling, Models of Design, Precedence and Prototypes
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:51

_id	2469
authors	Bosselmann, P.
year	1998
title	Representation of Places: Reality and Realism in City Design.
source	Los Angeles, University of California Press
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:27

_id	a47a
authors	Bourdakis, V.
year	1998
title	Navigation in Large VR Urban Models. In Virtual Worlds
source	J. Heudin (ed.), Lecture Notes in Artificial Intelligence 1434, Springer, Berlin, pp. 345-356
summary	The aim of this research project is to utilise VR models in urban planning in order to provide easy-to-use visualisation tools that will allow non-experts to understand the implications of proposed changes to their city. In this paper, the navigation problems identified whilst working on large VR city models are discussed and a "fly" based navigation mode is proposed and evaluated.
keywords	3D City modeling
series	other
email
more	http://fos.prd.uth.gr/vas/papers/VW98/
last changed	2003/04/02 11:55

_id	bb72
authors	Bourdot, P., Krus, M., Gherbi, R.
year	1998
title	Cooperation Between Reactive 3D Objects and a Multimodal X Window Kernel for CAD
source	Bunt, H., Beun, R.J., Borghuis, T. (Eds.). Multimodal Human-Computer Communication : Systems, Techniques, and Experiments. Berlin : Springer
summary	From the early steps of sketching to final engineering, a frequent and very important activity in designing objects is to perform graphical and spatial simulations to solve the constraints on the objects which are being designed. But when we analyse work situations involving the use of CAD systems, it is today an acknowledged fact that these tools are not helpful to perform these types of simulations. While knowledge modeling based on form feature concepts already offers some possibilities for attaching behaviour to objects, the simulation activity requires in addition a `real time' and `intelligent' management of the interactions between the 3D virtual objects and the CAD user. Our general purpose is to study how future CAD systems could be improved to achieve the simulation steps of object design. In this context we present some issues concerning the cooperation between a model of reactive 3D objects and a multimodal X Window kernel. We have developed a prototype of a system where objects with reactive behaviour can be built, and with which the user can interact with a combination of graphical actions and vocal commands. This prototype is used to evaluate the feasability and the usefulness of the integration of such techniques in futur applications that would be used by object designers in a real working context. We describe the current state of this system and the planned improvements.
series	other
last changed	2003/11/21 15:16

_id	6afb
authors	Chan, R., Jepson, W. and Friedmann, S.
year	1998
title	Urban Simulation: An Innovative Tool for Interactive Planning and Consensus Building
source	Proceedings of the 1998 National Planning Conference, American Planning Association, ACIP Press
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
more	http://www.asu.edu/caed/proceedings98/Chan/chan.html
last changed	2001/06/04 20:27

_id	ec84
authors	Cote, Pierre
year	1999
title	Québec City Churches
doi	https://doi.org/10.52842/conf.acadia.1999.013
source	ACADIA Quarterly, vol. 18, no. 1, pp. 13-14
summary	The following pictures come from a work in progress at the School of Architecture of Laval University, done in collaboration with the "Centre de développement économique et urbain de la Ville Québec" (CDEU). The 3D models from which the pictures were generated, have been created by students at the School of architecture (part of this work is illustrated). The project started at the beginning of the summer 97 by the modeling competition of Notre-Dame-de-Grâce Church, located in Québec City Saint-Sauveur neighborhood. The works continued during the summers of 1997 and 1998 and will resume this summer. To date, this ongoing project has given to nine students the opportunity to model 19 churches to a level of details useful to professionals.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	dbf3
authors	Curcio, Esteban and Perera, Gonzalo
year	2001
title	DEL MODELADO 3D AL PROTOTIPO INDUSTRIAL (From 3-D Modeling to the Industrial Prototype)
source	SIGraDi biobio2001 - [Proceedings of the 5th Iberoamerican Congress of Digital Graphics / ISBN 956-7813-12-4] Concepcion (Chile) 21-23 november 2001, pp. 77-79
summary	From 3D modeling to industrial prototype Industrial Design first year students (UNLP), led by designers Esteban Curcio and Gonzalo Perera, presented OGU coffee table in the avant-garde furniture category in Salao Design Movelsul (Brasil, 1998). Description: As an extracurricular activity, students had to deal with production variables related in particular to automated technologies and its effect on product design, completing each piece 3D digital modeling and following the whole process from manufacturing through diffusion and marketing. Technologies: Models for aluminum smelting: CAD / CAM / CNC; Glass: CNC cut with diamond milling cutter; 1020 steel: Computerized laser cut.
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	c721
authors	Dauner, J., Landauer, E. and Fraunhofer, I.
year	1998
title	3D Product Presentation Online: The Virtual Design Exhibition
source	VRML 98 - Third Symposium on the Virtual Reality Modeling Language. S. N. Spencer. Monterey, CA, ACM: 57-62
summary	VRML offers a high potential for product presentation: Instead of regarding flat, static pictures, configurable and animated 3D models embedded in entertaining environments provide a new way of product presentation. But seriously using VRML for this application domain means facing several challenges. We discuss these issues by using the Virtual Design Exhibition as a showcase. In this exhibition seven interior design companies show products with high aesthetic quality. We discuss how these aesthetics influence the VRML presentation and give some guidelines resulting from our experience. CR Categories and Subject Descriptors: H.5.1 [Information Interfaces and Presentation] Multimedia Information; Systems - Artificial realities H.5.2 [Information Interfaces and Presentation] User Interfaces - Screen design; I.3.6 [Computer Graphics] Methodology and Techniques - Interaction techniques
series	other
last changed	2003/04/23 15:50

_id	4233
authors	Day, Alan K. and Radford, Antony D.
year	1998
title	An Overview of City Simulation
doi	https://doi.org/10.52842/conf.caadria.1998.183
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 183-192
summary	The present state of development of city simulation is outlined, including the relationship between the physical city and the virtual city and the traditions and history which lies behind the development of computer simulations of cities.
keywords	3D City Modeling, Environmental Simulation, Geographic Information Systems, Cities, Urban Models
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:55

_id	8b38
authors	Do, Ellen Yi-Luen and Gross, Mark D.
year	1998
title	The Sundance Lab- "Design Systems of the Future"
doi	https://doi.org/10.52842/conf.acadia.1998.008
source	ACADIA Quarterly, vol. 17, no. 4, pp. 8-10
summary	The last thirty years have seen the development of powerful new tools for architects and planners: CAD, 3D modeling, digital imaging, geographic information systems, and real time animated walkthroughs. That’s just the beginning. Based on our experience with CAD tools, analysis of design practice, and an understanding of computer hardware and software, we’re out to invent the next generation of tools. We think architects should be shakers and makers, not just consumers, of computer aided design. We started the Sundance Lab (for Computing in Design and Planning) in 1993 with a few people and machines. We’ve grown to more than a dozen people (mostly undergraduate students) and a diverse interdisciplinary array of projects. We’ve worked with architects and planners, anthropologists, civil engineers, geographers, computer scientists, and electrical engineers. Our work is about the built environment: its physical form and various information involved in making and inhabiting places. We cover a wide range of topics – from design information management to virtual space, from sketch recognition to design rationale capture, to communication between designer and computer. All start from the position that design is a knowledge based and information rich activity. Explicit representations of design information (knowledge, rationale, and rules) enables us to engage in more intelligent dialogues about design. The following describes some of our projects under various rubrics.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	5477
authors	Donath, D., Kruijff, E., Regenbrecht, H., Hirschberg, U., Johnson, B., Kolarevic, B. and Wojtowicz, J.
year	1999
title	Virtual Design Studio 1998 - A Place2Wait
doi	https://doi.org/10.52842/conf.ecaade.1999.453
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 453-458
summary	This article reports on the recent, geographically and temporally distributed, intercollegiate Virtual Design Studio based on the 1998 implementation Phase(x) environment. Students participating in this workshop had to create a place to wait in the form of a folly. This design task was cut in five logical parts, called phases. Every phase had to be finished within a specific timeframe (one day), after which the results would be stored in a common data repository, an online MSQL database environment which holds besides the presentations, consisting of text, 3D models and rendered images, basic project information like the descriptions of the phases and design process visualization tools. This approach to collaborative work is better known as memetic engineering and has successfully been used in several educational programs and past Virtual Design Studios. During the workshop, students made use of a variety of tools, including modeling tools (specifically Sculptor), video-conferencing software and rendering programs. The project distinguishes itself from previous Virtual Design Studios in leaving the design task more open, thereby focusing on the design process itself. From this perspective, this paper represents both a continuation of existing reports about previous Virtual Design Studios and a specific extension by the offered focus. Specific attention will be given at how the different collaborating parties dealt with the data flow and modification, the crux within a successful effort to cooperate on a common design task.
keywords	Collaborative design, Design Process, New Media Usage, Global Networks
series	eCAADe
email
last changed	2022/06/07 07:55

_id	2d75
authors	Entous, Marc
year	1998
title	Developments in 3D Scanning and Digitizing: New Strategies for an Evolving Design Process
doi	https://doi.org/10.52842/conf.acadia.1998.212
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 212-220
summary	The computer is now a widely accepted tool in architecture as a production and business tool. Acceptance of digital technology as a design aid has been much slower, but continuing developments in ease of use, capabilities, and lower costs are encouraging the use of three-dimensional design modeling. As the demand for 3D design computing grows, peripheral digital technologies are also developing and being integrated. This paper describes on-going research into how current and near-future developments in three-dimensional scanning and digitizing technology that have the potential to substantially change processes of architectural design. Scanners, or digitizers, assist in transforming physical objects and models into digital representations. The capabilities of 3D scanners in architectural design have only begun to be explored. Existing and emerging 3D scanning technologies are briefly described followed by a discussion of sample existing, new, and potential uses of these capabilities as a design tool. An experiment is conducted to contrast the differences between stylus-based and laser-based digitizers in an architectural design environment.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	cd37
authors	Kensek, Karen and Noble, Douglas
year	1998
title	Digital Reconstruction: The Architecture of Raphael Soriano
doi	https://doi.org/10.52842/conf.acadia.1998.011
source	ACADIA Quarterly, vol. 17, no. 4, pp. 11-12
summary	With the research help of Wolfgang Wagener, the students in our computer graphics class are using form•Z, 3D Studio, and Premiere to document and interpret the work of Raphael Soriano. These images are from a class currently underway in fall semester, 1998, at USC. The students are responsible for modeling, rendering, and animating (with the help of GIFBuilder), their buildings in form•Z, with an emphasis on exterior form. Then they model, render, and animate their projects in 3D Studio concentrating on the interior and interpreting how the building might have been furnished. Other studies covered the use of QuickTime VR and Web page development. Additional work will be done to make the work more “realistic” in response to critiques by Wagener. The next stage of the project is to explain the important features of the building through the use of Premiere. Students may choose to use a purely documentary style or MTV approach or other presentation “style” as long as they clearly define the intent of the presentation and then execute it.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	c125
authors	LaViola, J., Holden, L.S., Forsberg, A.S., Bhuphaibool, D.S. and Zeleznik, R.C.
year	1998
title	Collaborative Conceptual Modeling Using the SKETCH Framework
source	Proceedings of IASTED International Conference on Computer Graphics and Imaging, 154-158
summary	This paper introduces NetSketch, an application that supports distributed conceptual design by providing tools for modelessly creating, manipulating and viewing 3D models in a shared virtual space. Inherent problems exist with collaborative design tools because of the simultaneous group interaction required for users to smoothly and effectively work together in the same virtual space. With NetSketch, we provide solutions to these problems by providing a fast and direct gesture-based user interface, a set of visual effects that better enable a user's awareness of operations done by other participants, and a set of tools for enhancing visual communication between participants.
series	other
last changed	2003/04/23 15:50

_id	8b37
authors	Massie, T.
year	1998
title	A Tangible Goal for 3D Modeling
source	IEEE Computer Graphics and Applications. pp. 62 - 65. Vol. 18, Issue: 3
summary	Although the speed of computers increases exponentially, the amount and quality of useful work that we perform on them seems to increase linearly at best. Faster processors are not enough-to significantly increase the utility of computers requires new computer interfaces. The keyboard was adequate for text-based applications, but the advent of the desktop metaphor and windows computing environment demanded a new mechanical interface-the mouse. As we progress into applications that incorporate interactive life-like 3D computer graphics, the mouse falls short as a user interface device, and it becomes obvious that 3D computer graphics could achieve much more with a more intuitive user interface mechanism. Haptic interfaces, or forcefeedback devices, promise to increase the quality of humancomputer interaction by accommodating our sense of touch. Of all the senses, only touch is bidirectional-allowing us to perceive and change objects simultaneously in the same location. Because the sense of touch is so compelling, researchers have studied it for some time.1,2 (Refer to the annual proceedings of the Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, published by the American Society of Mechanical Engineers, New York.) Various commercial devices are now available that can accommodate1 even seven degrees of freedom. I used the three degrees-of-freedom Phantom haptic interface for most of the interactions described in this article. Users interact with the Phantom interface with their finger in a thimble or by holding a stylus
series	journal paper
last changed	2003/04/23 15:50

_id	489a
authors	Matthews, K., Duff, S. and Corner, D.
year	1998
title	A Model for Integrated Spatial and Structural Design of Buildings
doi	https://doi.org/10.52842/conf.caadria.1998.123
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 123-132
summary	Recent advances in computer graphics and 3D user interfaces have enabled the emergence of 3D sketch modeling as a viable approach to architectural design, especially in the early schematic phase. This paper describes how a system can be built and used which integrates the capabilities of a good structural analysis system in the user-friendly working environment of a design-oriented modeling program. The structure of a building model as seen by finite element algorithms is a schematic idealization of the building's physical structure into nodes, elements, internal releases, boundary conditions, and loads. The more familiar architectural model used for design visualization represents spatial elements such as roofs, floors, walls, and windows. Rather than treat these models independently, the structural model can be defined in relation to the architectural as a virtual model with inherited common characteristics and additional relational and attribute information, using feature-based geometry data structures to organize topological intelligence in the spatial model. This provides the basis for synchronous modification of structural and architectural aspects of the design.
keywords	Structural Design, Spatial Design, Design Integration, Human-Computer Interaction, Feature-Based Modeling, Finite Element Analysis, Geometric Inference
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:58

_id	e184
authors	Popov, V., Popova, L. and De Paoli, G.
year	1998
title	Towards an Object-Oriented Language for the Declarative Design of Scenes
doi	https://doi.org/10.52842/conf.acadia.1998.316
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 316-353
summary	We propose a prototype “kernel” of an object-oriented language, SOML (Scene Objects Modeling Language), intended to assist in the declarative design of scenes in image synthesis. This language is an attempt to provide the designer with a tool to facilitate the rapid prototyping of 3D scenes. It can also serve as a tool for knowledge acquisition and representation , and for communication and exchange of data with other tools in a design environment. Advantages offered by the implementation of SOML are: (a) from user’s viewpoint: the possibility of declarative description of the initial concept associated with the target scene in terms of properties and constraint vocabulary, the possibility of quantitative and qualitative reasoning on these properties, the modification of the intermediate solutions to different levels of detail, the utilisation of previous solutions; and (b) from the implementation viewpoint: the structuring of the properties and methods in the form of domain knowledge, the optimal solution generation according to heuristic causal-probabilistic criteria, the transformation of the semantic concept description of the scene in generic entry code for a geometrical CSG modeler or for rendering and visualization software, the integration of functionality for parameter generation and modification, the compilation of a scene from components of other final scenes and operations of geometrical transformations acting on groups of scenes. We present the architecture of the object-based implantation of the language and its interpreter, in the unified notation formalism UML. The utilization of the SOML language is illustrated by some examples.
series	ACADIA
email
last changed	2022/06/07 08:00

_id	48db
authors	Proctor, George
year	2001
title	CADD Curriculum - The Issue of Visual Acuity
doi	https://doi.org/10.52842/conf.ecaade.2001.192
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 192-200
summary	Design educators attempt to train the eyes and minds of students to see and comprehend the world around them with the intention of preparing those students to become good designers, critical thinkers and ultimately responsible architects. Over the last eight years we have been developing the digital media curriculum of our architecture program with these fundamental values. We have built digital media use and instruction on the foundation of our program which has historically been based in physical model making. Digital modeling has gradually replaced the capacity of physical models as an analytical and thinking tool, and as a communication and presentation device. The first year of our program provides a foundation and introduction to 2d and 3d design and composition, the second year explores larger buildings and history, the third year explores building systems and structure through design studies of public buildings, fourth year explores urbanism, theory and technology through topic studios and, during the fifth year students complete a capstone project. Digital media and CADD have and are being synchronized with the existing NAAB accredited regimen while also allowing for alternative career options for students. Given our location in the Los Angeles region, many students with a strong background in digital media have gone on to jobs in video game design and the movie industry. Clearly there is much a student of architecture must learn to attain a level of professional competency. A capacity to think visually is one of those skills and is arguably a skill that distinguishes members of the visual arts (including Architecture) from other disciplines. From a web search of information posted by the American Academy of Opthamology, Visual Acuity is defined as an ability to discriminate fine details when looking at something and is often measured with the Snellen Eye Chart (the 20/20 eye test). In the context of this paper visual acuity refers to a subject’s capacity to discriminate useful abstractions in a visual field for the purposes of Visual Thinking- problem solving through seeing (Arnheim, 1969, Laseau 1980, Hoffman 1998). The growing use of digital media and the expanding ability to assemble design ideas and images through point-and-click methods makes the cultivation and development of visual skills all the more important to today’s crop of young architects. The advent of digital media also brings into question the traditional, static 2d methods used to build visual skills in a design education instead of promoting active 3d methods for teaching, learning and developing visual skills. Interactive digital movies provide an excellent platform for promoting visual acuity, and correlating the innate mechanisms of visual perception with the abstractions and notational systems used in professional discourse. In the context of this paper, pedagogy for building visual acuity is being considered with regard to perception of the real world, for example the visual survey of an environment, a site or a street scene and how that visual survey works in conjunction with practice.
keywords	Curriculum, Seeing, Abstracting, Notation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	4d85
authors	Shimokawa, Y., Morozumi, M., Iki, K. and Homma, R.
year	1998
title	Replacement and Transformation as a Key to Schematic Design Thinking - 3-D Modeling System which Supports Design Thinking
doi	https://doi.org/10.52842/conf.caadria.1998.365
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 365-374
summary	This paper analyses a prototype of a 3D modeling system that can support schematic design development and begins with very abstract representation elaborates it step by step into a detailed representation. Using Mitchell's concept of a TOPDOWN system for 2D sketches as the basis, the authors proposed a design process model and a prototype that allows both bottom up additive processes in exploring the design frame and top down processes for the design refinement of each building element. Various utilities of replacing and transforming graphic objects as well as those that can control shapes and the location of those objects with construction lines have been proposed. The authors discussed possible use of the system and topics for future study by reviewing case studies.
keywords	Replacement Operation, Modeling System, Schematic Design, Design Thinking
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:56

_id	33a6
authors	Strong, J.
year	1998
title	Cognitive Architecture: Bridging the gap between real and virtual environment design
source	Architecture Department. Adelaide, Australia, University of Adelaide
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
last changed	2001/06/04 20:41

For more results click below: