Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 553

Reformat results as: short short into frame detailed detailed into frame

_id	aac0
authors	Garcia, Renato
year	1998
title	Structural Feel or Feelings for Structure? - Stirring Emotions through the Computer Interface in Behaviour Analysis of Building Structures
doi	https://doi.org/10.52842/conf.caadria.1998.163
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 163-171
summary	The use of computers in the analysis of architectural structures has at present become indispensable and fairly routine. Researchers & professionals in architecture and engineering have taken advantage of current computer technology to develop richer and more comprehensive interactive interfaces in systems designed to analyse structural behaviour. This paper discusses a research project which attempts to further enrich such computer interfaces by embodying emotion or mood (affective) components into them and assessing the effects of incorporating these into multimodal learning modules for students of architecture at the University of Hong Kong. Computer structural analysis is most often used to determine the final state of a structure after full loading, but can also be used very ably to depict the time-history behaviour of a structure. The time-dependent nature of this process of behaviour provides an excellent opportunity to incorporate emotion cues for added emphasis and reinforcement. Studying time-history behaviour of structures is a vital part of classroom learning in structures and this why such emotion cues can have significant impact in such an environment. This is in contrast to the confines of professional engineering practices where these cues may not be as useful or desirable because oftentimes intermediate time history data is bypassed as a blackbox and focus is placed primarily on bottomline analysis results. The paper will discuss the fundamental basis for the establishment of emotional cues in this project as well as it's implementation-which consists mainly of two parts. The first involves 'personifying' the structure by putting in place a structure monitoring system analogous to human vital signs. The second involves setting up a 'ladder' of emotion states (which vary from feelings of serenity to those of extreme anxiety) mapped to the various states of a structures stability or condition. The paper will further elaborate on how this is achieved through the use of percussion, musical motifs, and chord progression in resonance with relevant graphical animations. Initially in this project, emotion cues were used to reinforce two structural behaviour tutoring systems developed by this author (3D Catenary Stuctures module & Plastic Behaviour of Semi-rigid Steel Frames module). These modules were ideal for implementing these cues because both depicted nonlinear structural behaviour in a mainly time-history oriented presentation. A brief demonstration of the actual learning modules used in the project study will also be presented together with a discussion of the assessment of it's effectiveness in actual classroom teaching.
keywords	Affective Interfaces, Human-Computer Interaction, Computer-Aided-Engineering
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:50

_id	4fe4
authors	Spiridonidis, Constantin and Voyatzaki, Maria
year	1998
title	From Charming Technology to Teaching Methodology
doi	https://doi.org/10.52842/conf.ecaade.1998.147
source	Computers in Design Studio Teaching [EAAE/eCAADe International Workshop Proceedings / ISBN 09523687-7-3] Leuven (Belgium) 13-14 November 1998, pp. 147-156
summary	This paper intends to present the educational aims, objectives and results of our pedagogic methods to teach design with the aid of technology. The vehicle to fulfil this intention ran in a module form in the Schools of Architecture of Thessaloniki, Greece and of Plymouth, UK. The primary aim of the module introduced by the experiment was to generate the grounds and to give rise to opportunities so that the students could have the possibility to study through well-known contemporary architectural examples the relationship between thinking of and about architecture and doing architecture. The principal means to present this study was the computer. Some of the emerging questions from this experiment were what educational practices should we develop in order to support such an approach in the studio? What role should new technologies play in such an attempt? The experiment attempted to respond to these questions. In the module we attempted to implement our methodological viewpoint on the teaching of design based on the pedagogic starting point of the method of critical commentary. A brief review on the history of design teaching is described in order that our argument and chosen teaching methods to become clear. The theoretical and ideological content of our design teaching methods is described in relation to the module and in relation to the outcome.
series	eCAADe
email
more	http://www.eaae.be/
last changed	2022/06/07 07:56

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ga9808
id	ga9808
authors	Ceccato, Cristiano
year	1998
title	MICROGENESIS, The Architect as Toolmaker: Computer-Based Generative Design Tools and Methods
source	International Conference on Generative Art
summary	The purpose of this paper is to illustrate the results of various stages of research into the development of generative design methods and tools, conducted at the Architectural Association School of Architecture (London), Imperial College of Science, Technology and Medicine (London), and independently. A brief introduction explains the philosophy behind generative design methods and their basic principles. A number of computer software tools and projects developed by the author are then used to illustrate the methodology, techniques and features of generative design and its organisation of information.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	d44c
authors	Cheng, N.
year	1998
title	Digital Identity in the Virtual Design Studio
source	Constructing Identity: the Associated Collegiate Schools of Architecture (ACSA) 56th Annual Meeting Proceedings, Cleveland, Ohio
summary	Internet tools most effectively connect diverse groups when individuals involved experience vital human connections. Online strangers are pulled into a community in which they can see a friendly face in the crowded stream of information. Strong self expression engages an audience and can result in personal interactions which reward getting beyond the technology. A group of individual profiles can coalesce to give colorful definition to team biases, strengths and weaknesses. This paper examines how the expression of identity has been a critical factor in the success of Internet design collaborations. First, it provides context on how these projects can improve architectural education by increasing relevance. Second, it identifies opportunities for individual and team expression gathered from a series of annual international design exercises known as the Virtual Design Studio. Third, it explains strategies for fostering student expression and interaction. Finally, it cites areas for future investigation.
series	other
last changed	2003/04/23 15:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	fb22
authors	Chien, Sheng-Fen
year	1998
title	Supporting information navigation in generative design systems
source	Camegie Mellon University, School of Architecture
summary	Generative design systems make it easier for designers to generate and explore design altematives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed to enable designers to access the information with ease. Such aids may improve the usability of generative design systems and encourage their use in architectural practice. This dissertation presents a comprehensive approach to support navigation in generative design systems. This approach takes account of studies related to human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. It contains a general model of design space, basic navigation operations, and principles for designing navigation support. The design space model describes how the space may grow and evolve along predictable dimensions. The basic operations facilitate navigation activities in this multi-dimensional design space. The design principles aim at guiding system developers in creating navigation utilities tailored to the needs of individual design systems. This approach is validated through prototype implementations and limited pilot usability studies. The validity of the design space model and basic navigation operations is examined through the development of a design space navigation framework that encapsulates the model and operations in a software environment and provides the infrastructure and mechanisms for supporting navigation. Three prototype navigation tools are implemented using this framework. These tools are subjected to usability studies. The studies show that these tools are easy to leam and are efficient in assisting designers locating desired information. In summary, it can be demonstrated that through the prototype implementations and usability studies, this approach offers sufficient support for the design and implementation of navigation aids in a generative design system. The research effort is a pioneer study on navigation support in generative design systems. It demonstrates why navigation support is necessary; how to provide the support; and what types of user interaction it can offer. This research contributes to information navigation studies not only in the specific domain of generative design system research, but also in the general field of human-computer interaction.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	032b
authors	Cicognani, Anna
year	1998
title	A linguistic characterisation of design in text-based virtual worlds
source	University of Sydney
summary	In this research, it is suggested that design in text-based virtual worlds can be identified as a series of interactions between users and the virtual environment, and that these interactions for design can be approached using a linguistic perspective. The main assumption of this research is that a parallel can be drawn between the performance of design commands, and the one of speech acts in the physical world. Design in text-based virtual environments can then be articulated using a restricted set of speech acts, as design commands. Virtual worlds, represented as spaces, can be constructed following an architectural design metaphor. This metaphor provides a framework for the organisation of virtual entity relationships, and for the choice of words used to design. A linguistic characterisation is presented, by means of design activities, prototypes and scenarios, which derive from the architectural design metaphor. The characterisation of design is then validated by the analysis of an existing text-based virtual world.
keywords	Virtual Reality; Human-Computer Interaction; Computer-Aided Design; Programming Languages (Electronic Computers); Semantics; Programming Languages (Electronic Computers); Design
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	c88d
authors	Dave, Bharat and Danahy, John
year	1998
title	Virtual Study Abroad and Exchange Studio
doi	https://doi.org/10.52842/conf.acadia.1998.100
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 100-115
summary	The digital design studio has an area of application where conventional media are incapable of being used; collaboration in learning, design and dialogue with people in places other than where one lives. This distinctive opportunity has lead the authors to explore a form of design brief and virtual design studio (VDS) format not well addressed in the literature. Instead of sharing the same design brief, students in this alternative format design a project in the other students’ city and do not collaborate on the same design. Collaboration with other students takes the form of teaching each other about the city and culture served by the design. The authors discovered these studios produce a focus on site context that serves our pedagogical objectives–a blend of architectural, landscape architectural and urban design knowledge. Their students use a range of commercial CAD and computer supported collaborative work (CSCW) software common to that used in many VDS experiments reported on in the literature. However, this conventional use of technology is contrasted with a second distinctive characteristic of these studios, the use of custom software tools specifically designed to support synchronous and asynchronous three-dimensional model exchange and linked attribute knowledge. The paper analyzes some of the virtual design studio (VDS) work between the Swiss Federal Institute of Technology, the University of Toronto, and the University of Melbourne. The authors articulate a framework of VDS dimensions that structures their teaching and research.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	de62
authors	Eriksson, Joakim
year	1998
title	Planning of Environments for People with Physical Disabilities Using Computer Aided Design
source	Lund Institute of Technology, School of Architecture
summary	In the area of environment adaptations for people with physical disabilities, it is of vital importance that the design is optimized considering the human-environment interactions. All involved persons in such a planning process must be given sufficient support in understanding the information, so that everyone can participate actively. There is an apparent risk that discussions will be kept between experts, due to difficulties in understanding the complex and technical adaptation issues. This thesis investigates the use of computer-based tools for planning/designing environments for physically disabled people. A software prototype, and a method to use such a tool in the planning process, was developed and evaluated, based on the findings from six case studies of real planning situations. The case studies indicated that although such a tool would support the design, as well as the dialog between the participants, a certain level of technical and economical efficiency must be obtained. To facilitate the professional planner's work, an important issue is to maintain a large library of 3D objects. With the latest prototype implementation, it was found that such a planning tool can be produced, even when using consumer-oriented computers. One previous critical factor, interactive manipulation of 3D objects, can now be achieved if utilizing modern graphic cards with 3D acceleration. A usability test was performed to evaluate the prototype's basic operations, involving two groups of future users: five occupational therapist students, and four persons with major physical impairments. It was found that although the usability was satisfactory for the basic tasks, several items needed to be improved or added in future versions. It is important with an integrated support for manikins, in order to evaluate, e.g., wheelchair accessibility, reach ability, positioning of handrails, etc. This thesis reviews and compiles published anthropometrical and biomechanical data into a uniform segment-by-segment structure, in order to aid the design and modifications of manikins. The compilation was implemented as a spreadsheet document. An MRI investigation of the neck-shoulder region was performed on 20 healthy Scandinavian, female volunteers, measuring various musculoskeletal properties. These measurements can be used for further refinements of manikin specifications and biomechanical models.
keywords	Rehabilitation; Disability; Adaptation; Participatory Planning; Design Tool; 3D Graphics; Computer Aided Design; Virtual Reality; Manikin; Anthropometry; Biomechanics; Magnetic Resonance Imaging; Cervical Spine Kinematics
series	thesis:PhD
email
more	http://www.lub.lu.se/cgi-bin/show_diss.pl?db=global&fname=tec_250.html
last changed	2003/02/26 09:21

_id	5
authors	Flanagan, Robert
year	1998
title	The Design Threshold
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 36-45
summary	When digital technology finally assumes its far-reaching potential, it will cross the Design Threshold. it will assume its own innate and universal identity - not the misplaced identity often ascribed by computer programmers or the mimicry of traditional process dictated by status quo architects - but an identity and awareness that plays to the unique capabilities of digital design. Uniqueness occurs at the design threshold. It can be identified as the point where: (1) The digital process becomes integral to the conclusion, a design that would not have been reasonably anticipated otherwise. (2) The intention of the designer is substantially dependent on the interaction of digital process to accomplish the intended result. (3) The complexity of the task exceeds the ability of the designer to accomplish that task by any other reasonable available means. // This pedagogy is explored through graphic experiments that exhibit DNA like properties.
series	SIGRADI
email
more	http://carbon.cudenver.edu/~bneiman/Acadia97.html
last changed	2016/03/10 09:51

_id	4942
authors	Gardner, Brian M.
year	1998
title	The Grid Sketcher: An AutoCAD Based Tool for Conceptual Design Processes
doi	https://doi.org/10.52842/conf.acadia.1998.222
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 222-237
summary	Sketching with pencil and paper is reminiscent of the varied, rich, and loosely defined formal processes associated with conceptual design. Architects actively engage such creative paradigms in their exploration and development of conceptual design solutions. The Grid Sketcher, as a conceptual sketching tool, presents one possible computer implementation for enhancing and supporting these processes. It effectively demonstrates the facility with which current technology and the computing environment can enhance and simulate sketching intents and expectations. One pervasive and troubling undercurrent, however, is the conceptual barrier between the variable processes of human thought and those indigenous to computing. Typically with respect to design, the position taken is that the two are virtually void of any fundamental commonality. A designer’s thoughts are intuitive, at times irrational, and rarely follow consistently identifiable patterns. Conversely, computing requires predictability in just these endeavors. Computing is strictly an algorithmic process while thought is not always so predictable. Given these dichotomous relationships, the computing environment, as commonly defined, cannot reasonably expect to mimic the typically human domain of creative design. In this context, this thesis accentuates the computer’s role as a form generator as opposed to a form evaluator. The computer, under the influence of certain contextual parameters can, however, provide the designer with a rich and elegant set of forms that respond through algorithmics to the designer’s creative intents. The software presented in this thesis is written in AutoLISP and exploits AutoCAD’s capacious 3D environment. Designs and productions respond to a bounded framework where user selected parametric variables of size, scale, proportion, and proximity, all which reflect contextual issues, determine the characteristics of a unit form. Designer selected growth algorithms then arbitrate the spatial relationships between the unit forms and their propagation through the developing design. While the Sketcher implements only the GRID as an organizational discipline, many other paradigms are possible. Within this grid structure a robust set of editing features, supported by the computer’s inherent speed, allows the designer to analyze successive productions while refining ever more complex solutions. Through creative manipulation of these algorithmic structures ideas eventually coalesce to formalize images that represent a given design problem’s solution set.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	64b8
authors	Grabowski, M. and Barner, K.
year	1998
title	Data Visualization Methods for the Blind using Force Feedback and Sonification
source	Stein, M. (Ed.). Telemanipulator and Telepresence Technologies V. Vol. 3524
summary	Research in the field of scientific visualization has begun to articulate systematic methods for mapping data to a perceivable form. Most work in this area has focused on the visual sense. For blind people in particular, systematic visualization methods which utilize other sense need further development. In this work we develop methods for adding aural feedback to an existing haptic force feedback interface to create a multimodal visualization system. We examine some fundamental components of a visualization system which include the following: characterization of the data, definition of user directives and interpretation aims, cataloging of sensual representations of information, and finally, matching the data and user interpretation aims with the appropriate sensual representations. We focus on the last two components as they relate to the aural and haptic sensor. Cataloging of sensual representations is drawn form current research in sonification and haptics. The matching procedure can be thought of as a type of encoding which should be the inverse of the decoding mechanism of our aural and haptic systems. Topics in human perception are discussed, and issues related to the interaction between the two sensor are addressed. We have implemented a visualization system in the from of a Windows NT application using a sound card and a 3 DOF point interaction haptic interface. The system present a 2D data set primarily as a polygonal haptic surface although other capabilities of the haptic sensor are utilized such as texture discernment. In addition, real time aural feedback is presented as the user explores the surface. Parameters of sound such as pitch and spectral content are used to convey information. Evaluation of the system's effectiveness as an assistive technology for the blind reveals that combining aural and haptic feedback improves visualization over using either of the two senses alone.
series	other
last changed	2003/04/23 15:14

_id	cfad
authors	Kurmann, David
year	1998
title	Sculptor - How to Design Space?
doi	https://doi.org/10.52842/conf.caadria.1998.317
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 317-326
summary	Architects face a significant lack of computer tools that truly support them in the early, conceptual stages of design. In this paper, we take a look at the reasons for that and propose some solutions. We introduce new human-machine interaction methods that do differ from construction based approaches. We define new spatial interface paradigms as well as new objects and their behavior. Finally we present their implementation in ‘Sculptor’ - a modeling prototype to enable designing in space with space.
keywords	Spatial Modeling, Human Computer Interface, Cooperative Design
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:52

_id	ga9809
id	ga9809
authors	Kälviäinen, Mirja
year	1998
title	The ideological basis of generative expression in design
source	International Conference on Generative Art
summary	This paper will discuss issues concerning the design ideology supporting the use and development of generative design. This design ideology is based on the unique qualities of craft production and on the forms or ideas from nature or the natural characteristics of materials. The main ideology presented here is the ideology of the 1980´s art craft production in Finland. It is connected with the general Finnish design ideology and with the design ideology of other western countries. The ideology for these professions is based on the common background of design principles stated in 19th century England. The early principles developed through the Arts and Crafts tradition which had a great impact on design thinking in Europe and in the United States. The strong continuity of this design ideology from 19th century England to the present computerized age can be detected. The application of these design principles through different eras shows the difference in the interpretations and in the permission of natural decorative forms. The ideology of the 1980ïs art craft in Finland supports the ideas and fulfilment of generative design in many ways. The reasons often given as the basis for making generative design with computers are in very many respects the same as the ideology for art craft. In Finland there is a strong connection between art craft and design ideology. The characteristics of craft have often been seen as the basis for industrial design skills. The main themes in the ideology of the 1980´s art craft in Finland can be compared to the ideas of generative design. The main issues in which the generative approach reflects a distinctive ideological thinking are: Way of Life: The work is the communication of the maker´s inner ideas. The concrete relationship with the environment, personality, uniqueness, communication, visionary qualities, development and growth of the maker are important. The experiments serve as a media for learning. Taste and Aesthetic Education: The real love affair is created by the non living object with the help of memories and thought. At their best objects create the basis in their stability and communication for durable human relationships. People have warm relationships especially with handmade products in which they can detect unique qualities and the feeling that the product has been made solely for them. Counter-culture: The aim of the work is to produce alternatives for technoburocracy and mechanical production and to bring subjective and unique experiences into the customerïs monotonious life. This ideology rejects the usual standardized mass production of our times. Mythical character: There is a metamorphosis in the birth of the product. In many ways the design process is about birth and growth. The creative process is a development story of the maker. The complexity of communication is the expression of the moments that have been lived. If you can sense the process of making in the product it makes it more real and nearer to life. Each piece of wood has its own beauty. Before you can work with it you must find the deep soul of its quality. The distinctive traits of the material, technique and the object are an essential part of the metamorphosis which brings the product into life. The form is not only for formïs sake but for other purposes, too. You cannot find loose forms in nature. Products have their beginnings in the material and are a part of the nature. This art craft ideology that supports the ideas of generative design can be applied either to the hand made crafts production or to the production exploiting new technology. The unique characteristics of craft and the expression of the material based development are a way to broaden the expression and forms of industrial products. However, for a crafts person it is not meaningful to fill the world with objects. In generative, computer based production this is possible. But maybe the production of unique pieces is still slower and makes the industrial production in that sense more ecological. People will be more attached to personal and unique objects, and thus the life cycle of the objects produced will be longer.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	489a
authors	Matthews, K., Duff, S. and Corner, D.
year	1998
title	A Model for Integrated Spatial and Structural Design of Buildings
doi	https://doi.org/10.52842/conf.caadria.1998.123
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 123-132
summary	Recent advances in computer graphics and 3D user interfaces have enabled the emergence of 3D sketch modeling as a viable approach to architectural design, especially in the early schematic phase. This paper describes how a system can be built and used which integrates the capabilities of a good structural analysis system in the user-friendly working environment of a design-oriented modeling program. The structure of a building model as seen by finite element algorithms is a schematic idealization of the building's physical structure into nodes, elements, internal releases, boundary conditions, and loads. The more familiar architectural model used for design visualization represents spatial elements such as roofs, floors, walls, and windows. Rather than treat these models independently, the structural model can be defined in relation to the architectural as a virtual model with inherited common characteristics and additional relational and attribute information, using feature-based geometry data structures to organize topological intelligence in the spatial model. This provides the basis for synchronous modification of structural and architectural aspects of the design.
keywords	Structural Design, Spatial Design, Design Integration, Human-Computer Interaction, Feature-Based Modeling, Finite Element Analysis, Geometric Inference
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:58

_id	2539
authors	Neuckermans, H., De Ridder, T. and Geebelen, B.
year	1998
title	Speech-Driven Computer-Aided Design - Innovation in Human-Computer Interaction
doi	https://doi.org/10.52842/conf.caadria.1998.309
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 309-316
summary	The use of computers in architectural design has shifted from what initially was a very numerical approach into a graphical way and thus into a designerly way of working. Through the extensive use of WIMPs CAAD packages today are more or less user-friendly. In the meantime the ever increasing functionality of those packages inflate the number of commands, actions, options and choices which have to be activated with the mouse in order to generate a structured drawing. As a result packages become rather cumbersome to handle. In this research we have explored a new medium, namely speech, to tell the machine what to do. With software for speech recognition and making use of a head-mounted microphone we have built a far more user-friendly way of handling a CAD package. Grids, snap, ortho, layers, settings and other commands that can be used in combination with mouse actions are activated and deactivated by voice command. We are convinced that this is a step further towards a more easy and natural way of using computers while designing and certainly a way for speeding up the modeling of real architecture. The experiment has been conducted for AutoCAD with the software for speech recognition by Lernout & Hauspie. This new way of working is not limited to architecture and the principle can be used right now for any other package, provided it has a programming interface.
keywords	Electronic Design Media, Human-Computer Interaction, Design
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:58

_id	ga0026
id	ga0026
authors	Ransen, Owen F.
year	2000
title	Possible Futures in Computer Art Generation
source	International Conference on Generative Art
summary	Years of trying to create an "Image Idea Generator" program have convinced me that the perfect solution would be to have an artificial artistic person, a design slave. This paper describes how I came to that conclusion, realistic alternatives, and briefly, how it could possibly happen. 1. The history of Repligator and Gliftic 1.1 Repligator In 1996 I had the idea of creating an “image idea generator”. I wanted something which would create images out of nothing, but guided by the user. The biggest conceptual problem I had was “out of nothing”. What does that mean? So I put aside that problem and forced the user to give the program a starting image. This program eventually turned into Repligator, commercially described as an “easy to use graphical effects program”, but actually, to my mind, an Image Idea Generator. The first release came out in October 1997. In December 1998 I described Repligator V4 [1] and how I thought it could be developed away from simply being an effects program. In July 1999 Repligator V4 won the Shareware Industry Awards Foundation prize for "Best Graphics Program of 1999". Prize winners are never told why they won, but I am sure that it was because of two things: 1) Easy of use 2) Ease of experimentation "Ease of experimentation" means that Repligator does in fact come up with new graphics ideas. Once you have input your original image you can generate new versions of that image simply by pushing a single key. Repligator is currently at version 6, but, apart from adding many new effects and a few new features, is basically the same program as version 4. Following on from the ideas in [1] I started to develop Gliftic, which is closer to my original thoughts of an image idea generator which "starts from nothing". The Gliftic model of images was that they are composed of three components: 1. Layout or form, for example the outline of a mandala is a form. 2. Color scheme, for example colors selected from autumn leaves from an oak tree. 3. Interpretation, for example Van Gogh would paint a mandala with oak tree colors in a different way to Andy Warhol. There is a Van Gogh interpretation and an Andy Warhol interpretation. Further I wanted to be able to genetically breed images, for example crossing two layouts to produce a child layout. And the same with interpretations and color schemes. If I could achieve this then the program would be very powerful. 1.2 Getting to Gliftic Programming has an amazing way of crystalising ideas. If you want to put an idea into practice via a computer program you really have to understand the idea not only globally, but just as importantly, in detail. You have to make hard design decisions, there can be no vagueness, and so implementing what I had decribed above turned out to be a considerable challenge. I soon found out that the hardest thing to do would be the breeding of forms. What are the "genes" of a form? What are the genes of a circle, say, and how do they compare to the genes of the outline of the UK? I wanted the genotype representation (inside the computer program's data) to be directly linked to the phenotype representation (on the computer screen). This seemed to be the best way of making sure that bred-forms would bare some visual relationship to their parents. I also wanted symmetry to be preserved. For example if two symmetrical objects were bred then their children should be symmetrical. I decided to represent shapes as simply closed polygonal shapes, and the "genes" of these shapes were simply the list of points defining the polygon. Thus a circle would have to be represented by a regular polygon of, say, 100 sides. The outline of the UK could easily be represented as a list of points every 10 Kilometers along the coast line. Now for the important question: what do you get when you cross a circle with the outline of the UK? I tried various ways of combining the "genes" (i.e. coordinates) of the shapes, but none of them really ended up producing interesting shapes. And of the methods I used, many of them, applied over several "generations" simply resulted in amorphous blobs, with no distinct family characteristics. Or rather maybe I should say that no single method of breeding shapes gave decent results for all types of images. Figure 1 shows an example of breeding a mandala with 6 regular polygons: Figure 1 Mandala bred with array of regular polygons I did not try out all my ideas, and maybe in the future I will return to the problem, but it was clear to me that it is a non-trivial problem. And if the breeding of shapes is a non-trivial problem, then what about the breeding of interpretations? I abandoned the genetic (breeding) model of generating designs but retained the idea of the three components (form, color scheme, interpretation). 1.3 Gliftic today Gliftic Version 1.0 was released in May 2000. It allows the user to change a form, a color scheme and an interpretation. The user can experiment with combining different components together and can thus home in on an personally pleasing image. Just as in Repligator, pushing the F7 key make the program choose all the options. Unlike Repligator however the user can also easily experiment with the form (only) by pushing F4, the color scheme (only) by pushing F5 and the interpretation (only) by pushing F6. Figures 2, 3 and 4 show some example images created by Gliftic. Figure 2 Mandala interpreted with arabesques Figure 3 Trellis interpreted with "graphic ivy" Figure 4 Regular dots interpreted as "sparks" 1.4 Forms in Gliftic V1 Forms are simply collections of graphics primitives (points, lines, ellipses and polygons). The program generates these collections according to the user's instructions. Currently the forms are: Mandala, Regular Polygon, Random Dots, Random Sticks, Random Shapes, Grid Of Polygons, Trellis, Flying Leap, Sticks And Waves, Spoked Wheel, Biological Growth, Chequer Squares, Regular Dots, Single Line, Paisley, Random Circles, Chevrons. 1.5 Color Schemes in Gliftic V1 When combining a form with an interpretation (described later) the program needs to know what colors it can use. The range of colors is called a color scheme. Gliftic has three color scheme types: 1. Random colors: Colors for the various parts of the image are chosen purely at random. 2. Hue Saturation Value (HSV) colors: The user can choose the main hue (e.g. red or yellow), the saturation (purity) of the color scheme and the value (brightness/darkness) . The user also has to choose how much variation is allowed in the color scheme. A wide variation allows the various colors of the final image to depart a long way from the HSV settings. A smaller variation results in the final image using almost a single color. 3. Colors chosen from an image: The user can choose an image (for example a JPG file of a famous painting, or a digital photograph he took while on holiday in Greece) and Gliftic will select colors from that image. Only colors from the selected image will appear in the output image. 1.6 Interpretations in Gliftic V1 Interpretation in Gliftic is best decribed with a few examples. A pure geometric line could be interpreted as: 1) the branch of a tree 2) a long thin arabesque 3) a sequence of disks 4) a chain, 5) a row of diamonds. An pure geometric ellipse could be interpreted as 1) a lake, 2) a planet, 3) an eye. Gliftic V1 has the following interpretations: Standard, Circles, Flying Leap, Graphic Ivy, Diamond Bar, Sparkz, Ess Disk, Ribbons, George Haite, Arabesque, ZigZag. 1.7 Applications of Gliftic Currently Gliftic is mostly used for creating WEB graphics, often backgrounds as it has an option to enable "tiling" of the generated images. There is also a possibility that it will be used in the custom textile business sometime within the next year or two. The real application of Gliftic is that of generating new graphics ideas, and I suspect that, like Repligator, many users will only understand this later. 2. The future of Gliftic, 3 possibilties Completing Gliftic V1 gave me the experience to understand what problems and opportunities there will be in future development of the program. Here I divide my many ideas into three oversimplified possibilities, and the real result may be a mix of two or all three of them. 2.1 Continue the current development "linearly" Gliftic could grow simply by the addition of more forms and interpretations. In fact I am sure that initially it will grow like this. However this limits the possibilities to what is inside the program itself. These limits can be mitigated by allowing the user to add forms (as vector files). The user can already add color schemes (as images). The biggest problem with leaving the program in its current state is that there is no easy way to add interpretations. 2.2 Allow the artist to program Gliftic It would be interesting to add a language to Gliftic which allows the user to program his own form generators and interpreters. In this way Gliftic becomes a "platform" for the development of dynamic graphics styles by the artist. The advantage of not having to deal with the complexities of Windows programming could attract the more adventurous artists and designers. The choice of programming language of course needs to take into account the fact that the "programmer" is probably not be an expert computer scientist. I have seen how LISP (an not exactly easy artificial intelligence language) has become very popular among non programming users of AutoCAD. If, to complete a job which you do manually and repeatedly, you can write a LISP macro of only 5 lines, then you may be tempted to learn enough LISP to write those 5 lines. Imagine also the ability to publish (and/or sell) "style generators". An artist could develop a particular interpretation function, it creates images of a given character which others find appealing. The interpretation (which runs inside Gliftic as a routine) could be offered to interior designers (for example) to unify carpets, wallpaper, furniture coverings for single projects. As Adrian Ward [3] says on his WEB site: "Programming is no less an artform than painting is a technical process." Learning a computer language to create a single image is overkill and impractical. Learning a computer language to create your own artistic style which generates an infinite series of images in that style may well be attractive. 2.3 Add an artificial conciousness to Gliftic This is a wild science fiction idea which comes into my head regularly. Gliftic manages to surprise the users with the images it makes, but, currently, is limited by what gets programmed into it or by pure chance. How about adding a real artifical conciousness to the program? Creating an intelligent artificial designer? According to Igor Aleksander [1] conciousness is required for programs (computers) to really become usefully intelligent. Aleksander thinks that "the line has been drawn under the philosophical discussion of conciousness, and the way is open to sound scientific investigation". Without going into the details, and with great over-simplification, there are roughly two sorts of artificial intelligence: 1) Programmed intelligence, where, to all intents and purposes, the programmer is the "intelligence". The program may perform well (but often, in practice, doesn't) and any learning which is done is simply statistical and pre-programmed. There is no way that this type of program could become concious. 2) Neural network intelligence, where the programs are based roughly on a simple model of the brain, and the network learns how to do specific tasks. It is this sort of program which, according to Aleksander, could, in the future, become concious, and thus usefully intelligent. What could the advantages of an artificial artist be? 1) There would be no need for programming. Presumbably the human artist would dialog with the artificial artist, directing its development. 2) The artificial artist could be used as an apprentice, doing the "drudge" work of art, which needs intelligence, but is, anyway, monotonous for the human artist. 3) The human artist imagines "concepts", the artificial artist makes them concrete. 4) An concious artificial artist may come up with ideas of its own. Is this science fiction? Arthur C. Clarke's 1st Law: "If a famous scientist says that something can be done, then he is in all probability correct. If a famous scientist says that something cannot be done, then he is in all probability wrong". Arthur C Clarke's 2nd Law: "Only by trying to go beyond the current limits can you find out what the real limits are." One of Bertrand Russell's 10 commandments: "Do not fear to be eccentric in opinion, for every opinion now accepted was once eccentric" 3. References 1. "From Ramon Llull to Image Idea Generation". Ransen, Owen. Proceedings of the 1998 Milan First International Conference on Generative Art. 2. "How To Build A Mind" Aleksander, Igor. Wiedenfeld and Nicolson, 1999 3. "How I Drew One of My Pictures: or, The Authorship of Generative Art" by Adrian Ward and Geof Cox. Proceedings of the 1999 Milan 2nd International Conference on Generative Art.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	0e42
authors	Rouse, W., Geddes, N. and Curry, R.
year	1998
title	An Architecture for Intelligent Interfaces: Outline of an Approach to Supporting Operators of Complex Systems Articles
source	Human-Computer Interaction 1987-1988 v.3 n.2 pp. 87-122
summary	The conceptual design of a comprehensive support system for operators of complex systems is presented. Key functions within the support system architecture include information management, error monitoring, and adaptive aiding. One of the central knowledge sources underlying this functionality is an operator model that involves a combination of algorithmic and symbolic models for assessing and predicting an operator's activities, awareness, intentions, resources, and performance. Functional block diagrams are presented for the overall architecture as well as the key elements within this architecture. A variety of difficult design issues are discussed, and ongoing efforts aimed at resolving these issues are noted.
series	other
last changed	2002/07/07 16:01

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

For more results click below: