Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 550

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9801
id	ddss9801
authors	Achten, Henri and Leeuwen, Jos van
year	1998
title	A Feature-Based Description Technique for Design Processes: A Case Study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series	DDSS
last changed	2003/11/21 15:15

_id	ddss9802
id	ddss9802
authors	Akin, O., Aygen, Z., Cumming, M., Donia, M., Sen, R. and Zhang, Y.
year	1998
title	Computational Specification of Building Requirements in theEarly Stages of Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	We have been exploring computational techniques to help building designers to specify design requirements during the early stages of design. In the past, little has been accomplished in this area either in terms of innovative computational technologies or the improvement of design performance.The prospect of improving design productivity and creating a seamless process between requirements specification and formal design are our primary motivations. This research has been conducted as partof a larger project entitled SEED (Software Environment to Support Early Phases in Building Design). SEED features an open-ended modular architecture, where each module provides support for a design activity that takes place in early design stages. Each module is supported by a database to store and retrieve information, as well as a user interface to support the interaction with designers. The module described in this paper, SEED-Pro (the architectural programming module of SEED), is a workingprototype for building design requirements specification. It can be used by other modules in SEED or by design systems in other domains, such as mechanical engineering, civil engineering, industrial designand electrical engineering. Our approach to SEED-Pro is divided into two phases: core, and support functionalities. The core functionalities operate in an interactive mode relying on a case-based approach to retrieve and adapt complex specification records to the problem at hand. The supportfunctionalities include the case-base, the data-base, and the standards processing environment for building specification tasks. Our findings indicate that SEED-Pro: (1) is a tool that structures the unstructured domain of design requirements; (2) enables the integration of design requirements with the rest of the design process, (3) leads to the creation of complex case-bases and (4) enables the observation of their performance in the context of real world design problems.
series	DDSS
last changed	2003/11/21 15:15

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	ddss9809
id	ddss9809
authors	Brondino, Nair Cristina Margarido and Da Silva, Antônio Nélson Rodrigues
year	1998
title	A comparison of land valuation methods supported by GIS
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The purpose of this work was to study three different strategies for the appraisal of urban land. The first, a theoretical strategy created by the authors of this study to reproduce the common conditions of Brazilian cities, uses increments and reductions in the value of a square meter of land according to each lot’s individual features. The second method, based on Multiple Regression techniques, is widely used for valuation purposes. Finally, the effectiveness of Artificial Neural Networks to deal with thiskind of problem is studied. A sample of 157 lots was collected from several neighbourhoods of a small Brazilian city for the case study. The lot features recorded were area, width, shape, distance to the downtown district of the city through the street network, existence of fences and paved sidewalks, and market price. Prediction errors have been estimated for each of the three methods in order to compare their results. Predicted and error values, added to Geographical Information Systems, may be used to build thematic maps and to check how each strategy applies to different areas of the city. The analyses of error values conducted in this study showed that Artificial Neural Networks presented the best performance as a land appraisal method for the case studied.
series	DDSS
email
last changed	2003/11/21 15:16

_id	fb22
authors	Chien, Sheng-Fen
year	1998
title	Supporting information navigation in generative design systems
source	Camegie Mellon University, School of Architecture
summary	Generative design systems make it easier for designers to generate and explore design altematives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed to enable designers to access the information with ease. Such aids may improve the usability of generative design systems and encourage their use in architectural practice. This dissertation presents a comprehensive approach to support navigation in generative design systems. This approach takes account of studies related to human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. It contains a general model of design space, basic navigation operations, and principles for designing navigation support. The design space model describes how the space may grow and evolve along predictable dimensions. The basic operations facilitate navigation activities in this multi-dimensional design space. The design principles aim at guiding system developers in creating navigation utilities tailored to the needs of individual design systems. This approach is validated through prototype implementations and limited pilot usability studies. The validity of the design space model and basic navigation operations is examined through the development of a design space navigation framework that encapsulates the model and operations in a software environment and provides the infrastructure and mechanisms for supporting navigation. Three prototype navigation tools are implemented using this framework. These tools are subjected to usability studies. The studies show that these tools are easy to leam and are efficient in assisting designers locating desired information. In summary, it can be demonstrated that through the prototype implementations and usability studies, this approach offers sufficient support for the design and implementation of navigation aids in a generative design system. The research effort is a pioneer study on navigation support in generative design systems. It demonstrates why navigation support is necessary; how to provide the support; and what types of user interaction it can offer. This research contributes to information navigation studies not only in the specific domain of generative design system research, but also in the general field of human-computer interaction.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddss9813
id	ddss9813
authors	Cordan, Ozge and Besgen, Asu
year	1998
title	No Times But Principles, A Case Study From Priene, Anatolia
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	To emphasise the reusing of the local identities and cultural effects on contemporary designs, this paper is believed to have an important role for architects and for further designs. In this paper design theories in 1000's BC from Priene is held. The theories in urban and architectural design took place. From the intersection point of Ancient Greek and Western Anatolia, a city named "Priene" is chosen as a point of view because of its speciallocation on the Aegean Sea Coasts; Asia Minor and its design principles on urban and housing scale which were used during 1000's and are still common. Also, in this paper, an analysis is done on urban and housing scale. The analysis has two main parts. In the first part, the important buildings in Priene and their settlement decisions take part. And in the second part, the houses of Priene are explained. The general outputs of the study can be put under two titles: urbanism and architecture. In terms of urbanism, those features of a city image reflecting onto today’s world have been examined and the city of Priene has been analysed in the content of Lynch’s elements ensuring formation of a city image. In terms of architecture, results obtained have been separately examined in the content of today’s architecture as public buildings reflecting unique characteristics of Hellenistic architecture and as settlements. In short, the result that it is wished to reach in terms of city scale of the city of Priene in this study isthe expression of the essence of the historical heritage using a modern language to ensure historical continuity.
series	DDSS
last changed	2003/08/07 16:36

_id	38af
authors	Demirkan, H.
year	1998
title	Integration of reasoning systems in architectural modeling activities
source	Automation in Construction 7 (2-3) (1998) pp. 229-236
summary	In the first phase of a design process, the designer understands the problem and assimilates it to a conceptual framework that is already known to him. Due to the nature of design problems, the reasoning methods and techniques for modeling are not uniform and clear. An integrated reasoning system is proposed for modeling the architectural processes. Such a system may help designers to make decisions based on past experiences as well as domain theory. The performance of the integration approach is compared with the pure case-based and rule-based reasoning systems to study the efficiency and effectiveness in the same domains. The study tried to identify the reasoning systems used by designers pertaining to the interior design applications.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddss9827
id	ddss9827
authors	Heylighen, A., Segers, R. and Neuckermans, H.
year	1998
title	Prototype of an Interactive Case Library for Architectural Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Architects acquire an important part of their design knowledge from existing designs. Specific design projects from the past form an indispensable source of information and inspiration. Hence the idea todevelop a digital library of design cases that can be easily accessed during design. The paper describes a recently developed prototype of such a case library, intended to assist architecture students in the studio,yet with the potential of expansion into the office setting. When students enrol into a design project, they usually receive a reader with some relevant examples. At first sight, the digital case library only seems torepresent these examples into another medium, yet there are some important differences between both. Unlike the reader, the library has at its core an indexing-system which allows the easy retrieval of relevantinformation. By labelling projects with several features and making links between similar designs, the tool supports both directed search and browsing. A second difference is that the library is interactive. Studentsare not only able to consult interesting examples, but also to add other projects they consider relevant, to make links between them, to create extra indices etc. Finally, the tool allows to combine several media andto create links to external information sources.
series	DDSS
last changed	2003/08/07 16:36

_id	8dae
authors	Homma, R., Morozumi, M. and Iki, K.
year	1998
title	Network-Based Dynamic Evaluation Process for Urban Landscapes
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 213-222
doi	https://doi.org/10.52842/conf.caadria.1998.213
summary	When designing large-scale projects that affect urban landscapes such as the construction of power stations, it is important for a designer, to be able to predict how the landscape will be changed and public opinion in regard to the design stage. In order to support the communication between the public and the designer in the design process, authors have proposed a Network-Based Dynamic Evaluation Process (NDEP) for urban landscapes with WEB. This process can achieve a consensus decision, by applying the interactive cycles of proposal and evaluation to the design process. In this paper the authors outlined the framework of the process, the evaluation method by AHP, and a case study of an experimental production system.
keywords	Decision Support Systems, Landscape Simulation, VRML, JAVA
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:50

_id	6cfc
authors	Johnson Brian R. and Millet, Marietta S.
year	1998
title	Development of a Case Study "Multi-Site" on the World Wide Web
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 223-232
doi	https://doi.org/10.52842/conf.caadria.1998.223
summary	Seeking to enhance the availability and quality of architectural case studies, we examine the web, believing that it may help to simplify authorship, distribution, and navigation of a catalog of case studies. A disk-based multi-media prototype from an earlier effort has been converted to the web and generalized to create a template. Warehousing and navigation of multiple case studies forms the main focus of the current project. Two existing models, monolithic web sites and web rings, are considered and rejected. A third approach is developed which promises to provide a low-budget low-overhead infrastructure within which to house an indefinite number of case studies, while permitting free-form browsing of the collection. The approach which we have developed creates what we call a "multi-site".
keywords	Information Delivery Systems for Design, Cooperative Authorship, World Wide Web
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:52

_id	fe09
authors	Morozumi, Mitsuo and Homma, Riken
year	2001
title	A Design Studio Program that Applied Groupware to Stimulate Students’ Interactions - A Case Study of Junior Studio
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 317-322
doi	https://doi.org/10.52842/conf.ecaade.2001.317
summary	Since 1996, Kumamoto University has repeated several experiments to apply web-based collaborative design techniques to a junior design studio to stimulate students’ interaction in the class and to enhance their design abilities. As it became evident after a two-year experiment that writing web pages and uploading them to a web server was a barrier of communication for students, the authors developed a web-based groupware called GWNotebook, and started using it in 1998. In the fall semester of 2000, the authors tested the groupware in a revised version, and a new program of studio instructions that assumed the use of the groupware. This paper, referring students’ answers to two sets of questionnaire respectively carried out in 1997 and 2000, discusses the effectiveness of groupware and the instruction program.
keywords	Design Studio, Groupware, Www, Information Sharing, Design Communication
series	eCAADe
email
last changed	2022/06/07 07:59

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ddss9846
id	ddss9846
authors	Rigatti, Decio
year	1998
title	Rubem Berta Housing Estate: Order and Structure, Designand Use
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The main goal of this paper is to investigate, through some space configurational based tools, a quite common phenomenon found in many different locations in Brazil, concerning the process of urban changes individually introduced by dwellers of public housing estates. A significant number of housing estates, particularly those designed according to rationalist concepts, seem to be unable to support space related social requirements and are then widely transformed when compared to the original layouts. Beyond the quantitative features, the morphological changes that take place in those housing estates mean a fundamental new approach to understand how completely new urban structures can arisefrom the space produced by a comprehensive urban design, took as a starting point for the transformations made by the dwellers of those settlements. As a case study is analysed the Rubem Berta Housing Estate which was built in Porto Alegre/RS, Brazil, for 20,000 people in the late 70’s. Since the begining of its occupation in 1986 and the invasion that took place in 1987, the urban transformations there have never stopped. It’s possible to realize that the dwellers individually use some constant physical rules to define the new settlement which are very similar within the estate itself and, at the same time, very similar to those found in other transformed housing estates of this sort. The physical rules introduced change the features of the entire settlement in two different levels: a) locally, through the transformations introduced in order to solve individual needs; b) globally, the local rules of physical transformations produce a new overall structure for the whole urban complex. The knowledge of this process makes it possible to bring to the surface of architectural theory some generic configurational codes that can be used as a tool for designing public housing estates in Brazil.
series	DDSS
last changed	2003/08/07 16:36

_id	0f09
authors	Ando, H., Kubota, A. and Kiriyama, T.
year	1998
title	Study on the collaborative design process over the internet: A case study on VRML 2.0 specification design
source	Design Studies 19, pp. 289-308
summary	In this paper, we analyze the process of VRML 2.0 (Virtual Reality Modeling Language, Version 2.0) specification design for the deeper understanding of Internet-based collaboration. The VRML design process has the characteristics of being open to the public, geographically distributed, long-term, large-scale, and diverse. First, we examine the overall features of the design process by analyzing the VRML mailing list archive statistically. Secondly, we extract prototyping vocabulary (operational patterns) from the document change log. Thirdly, we analyze the process of proposing and agreeing with the PROTO node in detail. The results of analysis provide us with a guidance for facilitating innovation in the Internet-based collaboration.
series	journal paper
last changed	2003/11/21 15:15

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
doi	https://doi.org/10.52842/conf.ecaade.1999.722
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	b037
authors	Brusasco, P.L., Caneparo, L., Carrara, G., Fioravanti, A., Novembri, G. and Zorgno, Anna Maria
year	2000
title	Computer Supported Design Studio
source	Automation in Construction 9 (4) (2000) pp. 393-408
summary	The paper presents the ongoing experimentation of a Computer Supported Design Studio (CSDS). CSDS is part of our continuing effort to integrate computers and networks in the design studio. We recognise three corner stones to CSDS: memory, process and collaboration. They offer a framework for the interpretation of the pedagogical aspects of the teaching of architectural design in relation to the innovations produced by information and communication technologies. The theme of the 1998 CSDS is a railway station in Turin, Italy, to be incorporated in a reorganised rail transport system. The choice of this theme emphasises the realistic simulation aspects of the studio, where technical problems need to be interpreted from an architectural point of view.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c0e0
authors	Campbell, Dace
year	1998
title	Architectural Construction Documents on the Web: VRML as a Case Study
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 266-275
doi	https://doi.org/10.52842/conf.acadia.1998.266
summary	The Virtual Reality Modeling Language (VRML) and the World Wide Web (WWW) offer new opportunities to communicate an architect’s design intent throughout the design process. We have investigated the use of VRML in the production and communication of construction documents, the final phase of architectural building design. A prototype, experimental Web site was set up and used to disseminate design data as VRML models and HTML text to the design client, contractor, and fabricators. In this paper, we discuss the way our construction documents were developed in VRML, the issues we faced implementing it, and critical feedback from the users of the Web space/site. We analyze the usefulness of VRML as a communication tool for the design and construction industries. Finally, we discuss technical, social, and legal issues the AEC industry faces as it shifts to embrace widespread use of a “paperless” Web-based communications infrastructure for design documentation.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	18
authors	Castane, D., Leirado, E.R., Tessier, C. and Martinez.R.
year	1998
title	El Docente y la Utilizacion de Sistemas Multimediales en Redes Telematicas Aplicados a la Ensenanza 3D en Diseno Arquitectonico (The Teacher and the use of Multimedia Systems in Telematicas Networks Applied to the Teaching of 3D in Architectonic Design)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 154-159
summary	The remarkable advances in the technology of computer systems, including software, hardware, and networks, continuously give us new avenues to be utilized in education. The pedagogic strategy to be developed in the utilization of digital graphic systems applied to three-dimensional design in architecture (both in the design and virtual expression of objects or already designed architectural groups) is still changing with the times.Therefore, the Department, as an extension of its experience with this type of development and as a response to deal with special situations such as large numbers of students, develops this new proposal, which is currently being used. This project uses the implementation, structuring, and building of a virtual site as an informatics classroom, utilizing multimedia systems, to be used as a support for acquiring knowledge during the learning that takes place doing the coursework. This setting would allow for the feedback between the instructor and the student to be on-going, hence both groups being efficiently motivated through examples and opportunities of how to do the following: utilize appropriate technology, manipulate the right information, utilize the right kind of software programs and techniques, revamp the knowledge, and benefit from using the appropriate digital techniques for each specific case of architectural design and expression.
series	SIGRADI
email
last changed	2016/03/10 09:48

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9815
id	ddss9815
authors	Cutler, Lorraine M.
year	1998
title	Prototypical Laboratory Design to Support Learning and Teaching
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Collaboration between designers and scientists is an unusual combination to undertake the prototypical design of a teaching laboratory funded by Howard Hughes Medical Institute. The zoologists are developing a cooperative learning and interactive teaching pedagogy to make learningscience a process of critical inquiry and discovery. The industrial and interior designers are paying attention to the design issues of function and environmental support for teaching and doing the work required in a three-hour, hands-on beginning science learning space. Using both qualitative andquantitative research methods, the designers are able to determine a framework for making design decisions in prototypical beginning science environments. This framework is being developed as a guideline for designing similar environments at other institutions of higher learning. Videotape analysis precedes the research to uncover the underlying problems of the existing space and to formulate the questions for the research. Elements of a case study and an evaluative study integratewith the design process to form the basis of an intensive investigation of design issues for a beginning science teaching laboratory. Using two pretests as a baseline, the posttest data evaluates the success orfailure of the prototypical design. Both the pretests and the posttest evaluate the physical attributes of the old and new learning environment related to a beginning laboratory course in Zoology at Arizona State University.
series	DDSS
last changed	2003/08/07 16:36

For more results click below: