Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 549

Reformat results as: short short into frame detailed detailed into frame

_id	4233
authors	Day, Alan K. and Radford, Antony D.
year	1998
title	An Overview of City Simulation
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 183-192
doi	https://doi.org/10.52842/conf.caadria.1998.183
summary	The present state of development of city simulation is outlined, including the relationship between the physical city and the virtual city and the traditions and history which lies behind the development of computer simulations of cities.
keywords	3D City Modeling, Environmental Simulation, Geographic Information Systems, Cities, Urban Models
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:55

_id	215e
authors	Bai, Rui-Yuan and Liu, Yu-Tung
year	1998
title	Towards a Computerized Procedure for Visual Impact Analysis and Assessment - The Hsinchu Example
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 67-76
doi	https://doi.org/10.52842/conf.caadria.1998.067
summary	This paper examines the procedure of visual impact analysis and assessment proposed by Rahman and reviews the use of CAD applications in urban projects in the real world. A preliminary computerized procedure for visual impact analysis and assessment is proposed. An experiments was conducted in our laboratory to verify the preliminary procedure. In order to further study the revised procedure in real urban projects, it was also applied into the renew project of The Eastern Gate Plaza located in the center of city Hsinchu, Taiwan from 1996 to 1998. According to several face-to-face discussions with Hsinchu habitants, government officials, and professional designers, a final computerized procedure for visual impact analysis and assessment is concluded.
keywords	Environmental Simulation, Visual Impact Analysis and Assessment, Virtual Reality
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:54

_id	6afb
authors	Chan, R., Jepson, W. and Friedmann, S.
year	1998
title	Urban Simulation: An Innovative Tool for Interactive Planning and Consensus Building
source	Proceedings of the 1998 National Planning Conference, American Planning Association, ACIP Press
summary	Contributed by Susan Pietsch (spietsch@arch.adelaide.edu.au)
keywords	3D City Modeling, Development Control, Design Control
series	other
more	http://www.asu.edu/caed/proceedings98/Chan/chan.html
last changed	2001/06/04 20:27

_id	a114
authors	Faucher, Didier and Nivet, Marie-Laure
year	1998
title	Playing with Design Intent: Integration of Physical and Urban Constraints in CAD
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 118-137
doi	https://doi.org/10.52842/conf.acadia.1998.118
summary	Our work deals with the exploration of a universe of forms that satisfy some design intents. That is, we substitute a “generate and test” approach for a declarative approach in which an object is created from its properties. In this paper we present an original method that takes into account design intents relative to sunlight, visibility and urban regulation. First of all we study how current CAD tools have considered these properties until now. Our conclusion is that the classical design / simulation / analysis process does not suit design practices, especially in the early stages. We think that an improved CAD system should offer the architect the option of manipulating abstract information such as design intents. We define an intent as a conceptual expression of constraints having an influence on the project. For instance, a visual intent will be stated with no reference to vision geometry: “ from this place, I want to see the front of the new building”. We show how to represent each of these constraints with a 3D volume associated to some characteristics. If some solutions exist, we are sure that they are included in these volumes. For physical phenomena we compute the volume geometry using the principles of inverse simulation. In the case of urban regulation we apply deduction rules. Design intents are solved by means of geometrical entities that represent openings or obstructions in the project. Computing constraint volumes is a way of guiding the architect in his exploration of solutions. Constraint volumes are new spaces that can restore the link between form and phenomenon in a CAD tool. Our approach offers the designer the possibility of manipulating design intents.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ddss9831
id	ddss9831
authors	Kellett, Ronald and Girling, Cynthia
year	1998
title	Informing Public Participation in Neighborhood ScalePlanning and Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Neighborhood scale planning and design in many areas of the United States has been evolving toward a system of negotiated priorities and agreements. Common models include public workshops and design 'charrettes' which bring diverse stakeholders (citizens, land owners, developers, consultantsand public officials, for example) together to develop a mutually acceptable plan. Crucial to the quality and effectiveness of the outcome are decision support tools that help this diverse audience understand, communicate, collaborate and make decisions about complex and often emotional issuesof land use and design. Net Energy Communities (NEC), the project summarized in this paper, creates a suite of computer based tools for this purpose. NEC links three types of computer software — the spatial data manipulation, modeling and visualization capabilities of Geographic Information Systems (GIS), the illustration and information retrieval capabilities of multimedia relational databases and, the simulation and comparison capabilities of spreadsheet-based calculation models;into four tools — a site modeller, an elements of neighborhood database, a scenario modeller and ascenario calculator. This paper reports on the NEC project as an example of decision support tools for public participation using illustrations and examples from a 420 acre demonstration neighborhood design in progress for the City of Corvallis, Oregon, USA.
series	DDSS
last changed	2003/08/07 16:36

_id	24df
authors	Saggio, Antonino
year	1998
title	HyperArchitecture
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 224-227
doi	https://doi.org/10.52842/conf.ecaade.1998.224
summary	The "Universale d?architettura" is a pocket book series which is now arrived at 40 titles. Printed by Testo&Immagine in Turin it is directed by Bruno Zevi. It has a very large public, being distributed in newstands, in bookstores and mailed to subscribers at a very convenient price (6 dollars each). Many of its titles will soon appear in English, French, Spanish and German. The book series is divided into different sections (monographs, essays, architectural guides, anthologies) and in April 1988 a new section has been introduced. "La rivoluzione informatica" ("The Information revolution") is the title and Antonino Saggio is the curator. Scope of this new section is to bring closer architecture and computers by providing intellectual and cultural tools to orient the reader in a fast growing filed. The first book (Luigi Prestinenza Puglisi, Hyperarchitecture. Spaces in the electronic era) is an essay that combines a critical overview of most recent projects by Ito, Arakama, Koolhaas, Libeskind with epistemological consideration and researches coming from conceptual art. Three key words organized the material: projection, mutation, simulation. The next book (Gerhard Schmitt, Information architecture) deals with foundation and future of Caad systems and it can be seen from one side as an extremely updated manual and from the other as the construction of the developing lines of Caad research. Other forthcoming titles include: Virtual Terragni, How works the Eisenman Office, Design and Build with Computers. "La rivoluzione informatica" is (not only in Italy but also, quite probably, anywhere) the only book series which addresses the theme of architectural design in the electronic era. To better understand its scope, character and goals, it follows the Afterward by Saggio to the first book.
series	eCAADe
email
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/11saggio/index.htm
last changed	2022/06/07 07:56

_id	ddss9803
id	ddss9803
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1998
title	Extending spatial DSS with spatial choice models of multipurpose shopping trip behaviour
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Spatial choice or interaction models have been widely used in spatial DSS or customised GIS for analysing the impacts of retail location plans. The models typically used, however, do not account for spatial agglomeration effects on spatial choice behaviour. This study develops a model system for analysing the impacts of retail plans based on a choice model of multipurpose behaviour developed in earlier work. The model system is implemented in the spatial DSS called Location Planner. An empirical study demonstrates the empirical estimation and use of the model for analysing the impacts of an expansion of floor space in the major shopping centre of a middle-sized city in The Netherlands. The results indicate that agglomeration effects as predicted by the model can have substantial impacts on the performance of retail systems. Therefore, it is argued that when incorporated in a spatial DSS, the more complex models have the potential to improve the use of these systems for impact analysis.
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9811
id	ddss9811
authors	Barbanente, A., Conte, E. and Monno, V.
year	1998
title	Changing trends and approaches in human and computer modelling for social housing policies
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper discusses conceptual issues, goals and preliminary results of an on-going research which aims at building a Decision Support System for public housing environmental oriented maintenance and management in a city in Southern Italy, Bari. Traditional post-war Italian housing policies are compared with more recent approaches in the field, pointing out the change from quantitative, aggregated, more simple building problems and relatedapproaches to qualitative, differentiated, complex ones integrating social, economic and environmental dimensions with the aim of regenerating deteriorated residential areas. The paper claims for the need shift, both in the human and computer areas, from traditional quantitative models to new approaches able to manage also qualitative variables, temporal dynamics, emergencies, and intentionality, since they appear key aspects of the real world to be modelled. The housing estate of Bari and its needs of maintenance and management are examined, eliciting essential related knowledge using the interview technique. The clear orientation towards sustainable policies for urban regeneration, at a local, national, and Community level, is also considered. The innovative and collaborative nature of such policies and the attention to be paid to the social aspects ofthe problem require a complex DSS, integrating various kind of hypertexts, information systems and case-based fuzzy expert systems, whose main aims, functions, software and general organisation are outlined in the paper.
series	DDSS
last changed	2003/11/21 15:16

_id	7436
authors	Barría Chateau, H., Muñoz Viveros, C. and Cerda Brintrup, G.
year	1999
title	Virtual Tour Through Modern Architecture in Conception
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 475-477
summary	This paper describes the development of a project that was selected and sponsoured by the Regional Competition FONDART 1998 (Funds for the Development of Arts of the Regional Secretary of Education) that follows the aim of cultural diffusion. Towards the middle of the 30s, the city of Concepción developed an architecture distinctly colonial, neoclassical and eclectic. An earthquake in 1939 abruptly interrupted this scene, destroying the enterity of its most important buildings. The reconstruction of the city followed the manifestoes of Modern Architecture, consolidating the urban importance of buildings such us the Law Courts, the Railway Station and the Regional Government, that emerged as the new architectural and cultural heritage of the city. The project consisted on the modeling of eleven buildings of the modern architectural heritage, and on the generation of 42 virtual tours through the buildings that were finally edited on a 16' video. This video allows the spectator to make a virtual tour through the original modern heritage of the city, nowadays demolished, altered, and sometimes, even forgotten. This project pretends to widen the ways of comprehension of our cultural identity by using computer modelling and animation as a tool for the conservation of the architectural heritage; and creating a record that can be used as a reference and as an instrument of cultural difussion.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	029f
authors	Bermudez, Julio and King, Kevin
year	1998
title	Media Interaction & Design Process: Establishing a Knowledge Base
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 6-25
doi	https://doi.org/10.52842/conf.acadia.1998.006
summary	Integrating computers in architectural design means to negotiate between centuries-old analog design methods and the new digital systems of production. Analog systems of architectural production use tracing paper, vellum, graphite and ink, clipboard, clay, balsa wood, plastic, metal, etc. Analog systems have also been termed ‘handmade’, ‘manual’, ‘material’ or ‘physical’. Digital systems of architectural production use scanning, image manipulation, visualization, solid modeling, computer aided drafting, animation, rendering, etc. Digital systems have also been called ‘electronic’, ‘computer-aided’, ‘virtual’, etc. The difficulty lies in the underdeveloped state of the necessary methods, techniques, and theories to relate traditional and new media. Recent investigations on the use of multiple iterations between manual and electronic systems to advance architectural work show promising results. However, these experiments have not been sufficiently codified, cross-referenced and third party tested to conform a reliable knowledge base. This paper addresses this shortcoming by bringing together reported experiences from diverse researchers over the past decade. This summary is informed by more than three years of continuous investigation in the impacts of analog-digital conversations in the design process. The goal is to establish a state-of-the-art common foundation that permits instructors, researchers and practitioners to refer to, utilize, test, criticize and develop. An appendix is included providing support for the paper’s arguments.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	bb72
authors	Bourdot, P., Krus, M., Gherbi, R.
year	1998
title	Cooperation Between Reactive 3D Objects and a Multimodal X Window Kernel for CAD
source	Bunt, H., Beun, R.J., Borghuis, T. (Eds.). Multimodal Human-Computer Communication : Systems, Techniques, and Experiments. Berlin : Springer
summary	From the early steps of sketching to final engineering, a frequent and very important activity in designing objects is to perform graphical and spatial simulations to solve the constraints on the objects which are being designed. But when we analyse work situations involving the use of CAD systems, it is today an acknowledged fact that these tools are not helpful to perform these types of simulations. While knowledge modeling based on form feature concepts already offers some possibilities for attaching behaviour to objects, the simulation activity requires in addition a `real time' and `intelligent' management of the interactions between the 3D virtual objects and the CAD user. Our general purpose is to study how future CAD systems could be improved to achieve the simulation steps of object design. In this context we present some issues concerning the cooperation between a model of reactive 3D objects and a multimodal X Window kernel. We have developed a prototype of a system where objects with reactive behaviour can be built, and with which the user can interact with a combination of graphical actions and vocal commands. This prototype is used to evaluate the feasability and the usefulness of the integration of such techniques in futur applications that would be used by object designers in a real working context. We describe the current state of this system and the planned improvements.
series	other
last changed	2003/11/21 15:16

_id	b037
authors	Brusasco, P.L., Caneparo, L., Carrara, G., Fioravanti, A., Novembri, G. and Zorgno, Anna Maria
year	2000
title	Computer Supported Design Studio
source	Automation in Construction 9 (4) (2000) pp. 393-408
summary	The paper presents the ongoing experimentation of a Computer Supported Design Studio (CSDS). CSDS is part of our continuing effort to integrate computers and networks in the design studio. We recognise three corner stones to CSDS: memory, process and collaboration. They offer a framework for the interpretation of the pedagogical aspects of the teaching of architectural design in relation to the innovations produced by information and communication technologies. The theme of the 1998 CSDS is a railway station in Turin, Italy, to be incorporated in a reorganised rail transport system. The choice of this theme emphasises the realistic simulation aspects of the studio, where technical problems need to be interpreted from an architectural point of view.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c0e0
authors	Campbell, Dace
year	1998
title	Architectural Construction Documents on the Web: VRML as a Case Study
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 266-275
doi	https://doi.org/10.52842/conf.acadia.1998.266
summary	The Virtual Reality Modeling Language (VRML) and the World Wide Web (WWW) offer new opportunities to communicate an architect’s design intent throughout the design process. We have investigated the use of VRML in the production and communication of construction documents, the final phase of architectural building design. A prototype, experimental Web site was set up and used to disseminate design data as VRML models and HTML text to the design client, contractor, and fabricators. In this paper, we discuss the way our construction documents were developed in VRML, the issues we faced implementing it, and critical feedback from the users of the Web space/site. We analyze the usefulness of VRML as a communication tool for the design and construction industries. Finally, we discuss technical, social, and legal issues the AEC industry faces as it shifts to embrace widespread use of a “paperless” Web-based communications infrastructure for design documentation.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	6a78
authors	Chastain, Thomas and Elliott, Ame
year	1998
title	Cultivating Design Competence: Online Support for the Beginning Design Studio
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 290-299
doi	https://doi.org/10.52842/conf.acadia.1998.290
summary	A primary lesson of a beginning design studio is the development of a fundamental design competence. This entails acquiring skills of integration, projection, exploration, as well as critical thinking–forming the basis of thinking “like a designer.” Plaguing the beginning architectural design student as she develops this competence are three typical problems: a lagging visual intelligence, a linking of originality with creativity, and the belief that design is an act of an individual author instead of a collaborative activity. We believe that computation support for design learning has particular attributes for helping students overcome these problems. These attributes include its inherent qualities for visualization, for explicitness, and for sharing. This paper describes five interactive multi-media exercises exploiting these attributes which were developed to support a beginning design studio. The paper also reports how they have been integrated into the course curriculum.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	a96f
id	a96f
authors	Clayton, M., Johnson, R., Song, Y and Al-Qawasmi, J.
year	1998
title	Delivering Facility Documentation using Intranet Technology
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 240-253
doi	https://doi.org/10.52842/conf.acadia.1998.240
summary	Intranet technologies present new opportunities for delivering facility documentation for use in facility management. After the design stage, building documentation is reused to support construction and then facility operation. However, a common perception is that construction documents and as-built drawings are less than optimal for reuse to support operations. We have conducted a study of facility management processes and the information content of facility documentation in the context of information technologies that are emerging into the marketplace. The study provides guidance for facility managers who are implementing and fielding new information technology systems. A better understanding of information needs during operations may also help designers to better structure their own documents for reuse. An analysis of documents that are used throughout the life cycle of facilities has led us to a characterization of operations documents that are distinct from design drawings, record drawings or as-built drawings. From an analysis of facility management processes, we have identified different roles for facility documentation in those processes. Facility documentation may be used as a resource, as input, or as output. Furthermore, from interviews of facility management personnel, we identified facility information that was rated high in importance and low in satisfaction that might be targeted when implementing a facility information system. We prepared software demonstrations that show how the information may be extracted from drawings, entered into databases and then retrieved via Web and CAD interfaces. We suggest that operations documents consist of a variety of information types and require several kinds of information tools, including databases, CAD drawings and hypertext. Intranet technologies, databases and CAD software can be integrated to achieve facility management systems that address shortcomings in current facility management operations. In particular, intranet technologies provide improved accessibility to information for facility management customers and occasional users of the systems. Our study has produced recommendations based upon utility and ease-of-implementation for delivery of information from the design team to the owner, and among personnel during operation of the facility.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ddss9813
id	ddss9813
authors	Cordan, Ozge and Besgen, Asu
year	1998
title	No Times But Principles, A Case Study From Priene, Anatolia
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	To emphasise the reusing of the local identities and cultural effects on contemporary designs, this paper is believed to have an important role for architects and for further designs. In this paper design theories in 1000's BC from Priene is held. The theories in urban and architectural design took place. From the intersection point of Ancient Greek and Western Anatolia, a city named "Priene" is chosen as a point of view because of its speciallocation on the Aegean Sea Coasts; Asia Minor and its design principles on urban and housing scale which were used during 1000's and are still common. Also, in this paper, an analysis is done on urban and housing scale. The analysis has two main parts. In the first part, the important buildings in Priene and their settlement decisions take part. And in the second part, the houses of Priene are explained. The general outputs of the study can be put under two titles: urbanism and architecture. In terms of urbanism, those features of a city image reflecting onto today’s world have been examined and the city of Priene has been analysed in the content of Lynch’s elements ensuring formation of a city image. In terms of architecture, results obtained have been separately examined in the content of today’s architecture as public buildings reflecting unique characteristics of Hellenistic architecture and as settlements. In short, the result that it is wished to reach in terms of city scale of the city of Priene in this study isthe expression of the essence of the historical heritage using a modern language to ensure historical continuity.
series	DDSS
last changed	2003/08/07 16:36

_id	ba7c
authors	Cox, D.A. and Chugh, J.S. (et al.)
year	1998
title	The Usability of Transparent Overview Layers
source	CHI 98: 301-302
summary	Viewports into large visual workspaces are sometimes supplemented by a separate window that displays a miniaturized overview of the entire workspace. Instead of this separate window, we have layered a transparent version of the overview atop the viewport. Because the overview fills the display, it becomes the largest size possible. An exploratory study indicates that people can use this unusual system, where they switch between layers when performing a construction task.
series	other
last changed	2003/04/23 15:50

_id	40d7
authors	Dalyrmple, Michael and Gerzso, Michael
year	1998
title	Executable Drawings: The Computation of Digital Architecture
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 172-187
doi	https://doi.org/10.52842/conf.acadia.1998.172
summary	Architectural designs are principally represented by drawings. Usually, each drawing corresponds to one design or aspects of one design. On the other hand, one executable drawing corresponds to a set of designs. These drawings are the same as conventional drawings except that they have computer code or programs embedded in them. A specific design is the result of the computer executing the code in a drawing for a particular set of parameter values. If the parameters are changed, a new design or design variation is produced. With executable drawings, a CAD system is also a program editor. A designer not only designs by drawing but also programming. It fuses two activities: the first, drawing, is basic in architectural practice; and the second, progamming, or specifying the relation of outputs from inputs, is basic in computer system development. A consequence of executable drawings is that architectural form is represented by graphical entities (lines or shapes) as well as computer code or programs. This type of architecture we call digital architecture. Two simple examples are presented: first, the design of a building in terms of an executable drawing of the architects, Sangallo the Younger and Michelangelo, and second, a description of an object oriented implementation of a preliminary prototype of an executable drawing system written in 1997 which computes a simple office layout.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	0c54
authors	Datta, Sambit and Woodbury, Robert F.
year	1998
title	Reducing Semantic Distance in Generative Systems: A Massing Example
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 164-171
doi	https://doi.org/10.52842/conf.acadia.1998.164
summary	Generative design formalisms utilise discrete, constructive steps to encode strategies for formal change. In physical design media, the pervasive metaphor for doing design is the direct and continuous manipulation of the developing form. The goal of our investigation is to develop mixed initiative approaches to design exploration. In this paper, we address how constrained manipulation in generative systems can support both discrete and continuous modes of interaction. Massing is a common strategy for processing conceptual notions about three dimensional form. We use massing models of tenth century temple cellas as an example to illustrate an environment for constrained manipulation.
series	ACADIA
email
last changed	2022/06/07 07:55

For more results click below: