Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 556

Reformat results as: short short into frame detailed detailed into frame

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	63d1
authors	Rapid Prototyping Group Rapid Design and Manufacture Centre (RDM), Ryder, G., Ion, B., Green, G., Harrison, D. and Wood, Bruce
year	2002
title	Rapid design and manufacture tools in architecture
source	Automation in Construction 11 (3) (2002) pp. 279-290
summary	The continuing development of Rapid Prototyping technologies and the introduction of Concept Modelling technologies means that their use is expanding into a greater range of applications. The primary aim of this paper is to give the reader an overview of the current state of the art in Layered Manufacturing (LM) technology and its applicability in the field of architecture. The paper reports on the findings of a benchmarking study, conducted by the Rapid Design and Manufacturing (RDM) Group in Glasgow [G.J. Ryder, A. McGown, W. Ion, G. Green, D. Harrison, B. Wood, Rapid Prototyping Feasibility Report, Rapid Prototyping Group, Glasgow School of Art, 1998.], which identified that the applicability of LM technologies in any application can be governed by a series of critical process and application specific issues. A further survey carried out by the RDM group investigated current model making practice, current 3D CAD use and current use of LM technologies within the field of architecture. The findings are then compared with the capabilities of LM technologies. Future research needs in this area are identified and briefly outlined.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	4
authors	Bollinger, Elizabeth and Alvarado, Rodrigo Garcia
year	1998
title	Archetypes as Precedent of Virtual Architectures
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 32-35
summary	Archetypes are psychological concepts described by the renowned Swiss psychologist Cari Jung. It is possible identify archetypal forms in eminent buildings of different regions and ages, recognizing archetypes as a multi-cultural liaison for various architectures. These concepts function as basic precedents of spatial design in different geographical and historical contexts. The emerging digital culture is establishing a plethora of virtual environments, through web-pages of the Internet, global TV, multimedia CD, video games and immersive devices. These virtual environments offer electronic activities and tools for architectural practice. In both senses, virtual architectures conforms to the visual and spatial characteristics of technologies. Thus, electronic capabilities establish digital habitats and references to contemporary architecture. Since virtual architectures are immaterial constructions, perceptual properties guide the spatial and formal design. In that sense, archetypes allow a basic vocabulary for the design of virtual architectures, linking them to cultural history and giving them a human orientation.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	de77
authors	Ahmad Rafi, M.E.
year	1998
title	Computer animation for architectural visualisation
source	University of Strathclyde
summary	This thesis critically reviews the state of architectural animation, and relates this specific field to the more general motion-based representations, particularly traditional film-making techniques. It identifies key elements from traditional filmmaking and shows how these elements can improve computer-based architectural animation. The process of identification of the key elements from traditional film-making starts with a critical survey of the use of motion-based representation in local architectural practices and an empirical analysis of several architectural-based documentary films and past and present computer animations. All of the key ideas are illustrated on video by comparing real shooting clips to digital sequences focusing on production and post-production works. Some of these were implemented in two live projects ( Ministry of Finance, Malaysia and Damansara Parade ) for architects to understand the real problems and potentials in each process. These sets of illustrations expand the architect ideas to make full use of the motion-based process to improve the skill of combining architectural information in a good animation. The overall production process becomes more efficient when the motion-based footage is edited using a non-linear editing platform as it enhances the professional appearance as well as vastly saving most of the production time. The thesis concludes with specific recommendations relative to the stage at which the animation is produced. This technology can be best utilised with the right skills (a gained from film-making) and an understanding of each stage that requires a different level of input and gives a certain impact to the viewers.
series	thesis:PhD
email
last changed	2003/11/21 15:15

_id	ascaad2006_paper19
id	ascaad2006_paper19
authors	Arjun, G. and J. Plume
year	2006
title	Collaborative Architectural Design as a reflective Conversation: an agent facilitated system to support collaborative conceptual design
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	In this paper, definitions of collaborative design are discussed and understood in terms of a designer’s cognitive collaborations to explore his/her experiential memory for remote idea associations. Based on Schon’s reflective practice theory, Valkenburg and Dorst’s (1998) description of collaborative team designing is adopted as a model for a proposed design conversation system. The design conversation system is aimed at triggering the experiential memory of the designer by associating significant ideas from different design domains to provide different perspectives of a design situation. The paper describes a proposed framework for the design conversation system incorporating computational agents in a blackboard architecture environment.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	215e
authors	Bai, Rui-Yuan and Liu, Yu-Tung
year	1998
title	Towards a Computerized Procedure for Visual Impact Analysis and Assessment - The Hsinchu Example
doi	https://doi.org/10.52842/conf.caadria.1998.067
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 67-76
summary	This paper examines the procedure of visual impact analysis and assessment proposed by Rahman and reviews the use of CAD applications in urban projects in the real world. A preliminary computerized procedure for visual impact analysis and assessment is proposed. An experiments was conducted in our laboratory to verify the preliminary procedure. In order to further study the revised procedure in real urban projects, it was also applied into the renew project of The Eastern Gate Plaza located in the center of city Hsinchu, Taiwan from 1996 to 1998. According to several face-to-face discussions with Hsinchu habitants, government officials, and professional designers, a final computerized procedure for visual impact analysis and assessment is concluded.
keywords	Environmental Simulation, Visual Impact Analysis and Assessment, Virtual Reality
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:54

_id	817b
authors	Bong, C.W. and Wang, Y.C.
year	2002
title	A Shape Compactness Measurement Indexing with Fuzzy Multicriteria Decision Making Approach
doi	https://doi.org/10.52842/conf.caadria.2002.093
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 093-100
summary	Compactness of a district or zone is determined by considering its appearance and the area of dispersal of the district (Altman, 1998) and it is used as a characteristic to describe shape (Shiode, 1998; Knight, 1997). However, existing compactness measurement used to assess district plans in redistricting applications are vague and imprecision although there are more than thirty over Euclidean or non-Euclidean measurement methods. Therefore, this paper presents an integrated shape compactness measurement indexing with a fuzzy multicriteria decision making approach (FMCDM) to enhance the measurement of shape compactness. An experiment is conducted in order to verify the practically of the proposed model to improve existing compactness measurement method.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	bb72
authors	Bourdot, P., Krus, M., Gherbi, R.
year	1998
title	Cooperation Between Reactive 3D Objects and a Multimodal X Window Kernel for CAD
source	Bunt, H., Beun, R.J., Borghuis, T. (Eds.). Multimodal Human-Computer Communication : Systems, Techniques, and Experiments. Berlin : Springer
summary	From the early steps of sketching to final engineering, a frequent and very important activity in designing objects is to perform graphical and spatial simulations to solve the constraints on the objects which are being designed. But when we analyse work situations involving the use of CAD systems, it is today an acknowledged fact that these tools are not helpful to perform these types of simulations. While knowledge modeling based on form feature concepts already offers some possibilities for attaching behaviour to objects, the simulation activity requires in addition a `real time' and `intelligent' management of the interactions between the 3D virtual objects and the CAD user. Our general purpose is to study how future CAD systems could be improved to achieve the simulation steps of object design. In this context we present some issues concerning the cooperation between a model of reactive 3D objects and a multimodal X Window kernel. We have developed a prototype of a system where objects with reactive behaviour can be built, and with which the user can interact with a combination of graphical actions and vocal commands. This prototype is used to evaluate the feasability and the usefulness of the integration of such techniques in futur applications that would be used by object designers in a real working context. We describe the current state of this system and the planned improvements.
series	other
last changed	2003/11/21 15:16

_id	a841
authors	Brady, Darlene A.
year	1998
title	Premise & Process: The Pedagogical Implications of Computing in Design
doi	https://doi.org/10.52842/conf.ecaade.1998.031.2
source	Computers in Design Studio Teaching [EAAE/eCAADe International Workshop Proceedings / ISBN 09523687-7-3] Leuven (Belgium) 13-14 November 1998, pp. 31-39
summary	Form is capable of communicating a profound idea only when it is linked to a more essential metaphorical intention. The design studio is a forum for addressing this relationship of idea and the means of expression. Computing offers the potential to enhance the design enquiry, but issues of how and when to integrate computer applications in the studio have significant pedagogical implications. It not only has an impact on the size, complexity and number of design projects, but also on whether architectural ideas or computer technology is the content of the studio. It is important to distinguish between the computer image and the process used to achieve the final result. Many computer-based studios focus on the final product which encourages technology to drive design. This paper addresses how design issues can determine the use of technology so that design ideas and computing can reinforce each other, rather than be competing issues. It examines how the unique strengths of computer modeling and animation is used to explore the relationship between visual expression and intention via the issues of metaphor, tectonic color, context and kinetics in several of my graduate and upper-level undergraduate computer-based design studios in the School of Architecture at the University of Illinois at Urbana-Champaign (UI-UC). The studio topics are diverse in nature and include Normative Studio: Prototype as Formgiver; Urban Issues: Context, Color & Kinetics; and Virtual Metaphors: Literature as Formgiver.
series	eCAADe
email
more	http://www.eaae.be/
last changed	2022/06/07 07:54

_id	cb96
authors	Buckley, E., Zarli, A., Reynolds, C. and Richaud, O.
year	1998
title	Business objects in construct IT
source	R. Amor (ed.) Product and Process Modelling in the Building Industry, Building Research Establishment, Watford, England, pp. 117-130
summary	Objective: EU Esprit Project 25.741 Wonda aims to meet the needs for Enterprise Information Systems and E-Commerce in the construction and banking industries. Wonda aims to deliver a solution suitable for contracting firms. The solution should enable take-up by SMEs, incremental value-added growth (perhaps Incremental Radicalism), mobile computing for location independent access by project managers and quick set-up of virtual enterprises reflecting both the short customer-supplier relationships in the industry and the need of construction firms to constantly re-configure and re-invent themselves. Method: Wonda will develop an open and secure framework for business objects and electronic payment. Business objects can be defined as software components, which encapsulate business rules and procedures and which can run anywhere on the network. They provide secure and sophisticated access to diverse electronic content and software applications. Indeed, just as a building can be described as a unique arrangement of standard products, a building project can be described as a unique arrangement of standard product data. Business Objects give a high level view of product data. They can be assembled into frameworks to support high-level views on industrial projects. The open framework will enable a distributed architecture through CORBA thus facilitating the interoperation of heterogeneous software components as found in legacy systems. The modular security of the framework and its support for electronic payment ensure authenication, confidentiality and non-repudiation as required for the business processes of construction virtual enterprises. Indeed the modular and incremental implemenation of security will be achieved partly through a Business Object architecture. Results will comprise o a pilot in 2 product cycles, o an open & secure framework architecture, o Commotion middleware for enabling business objects on top of Corba, o WeBuild (construction), WeBank (banking) and SILK (security) business objects o OpenDMX component to enable object orientated access to legacy databases.
series	other
last changed	2003/04/23 15:14

_id	c11a
authors	Campbell, D.A.
year	1998
title	VRML In Architectural Construction Documents: A Case Study
source	VRML 98 Monterey - Proceedings of the 1998 VRML Conference, pp. 115-120
summary	The Virtual Reality Modeling Language (VRML) and the World Wide Web (WWW) offer new opportunities to communicate an architect's design intent throughout the design process. We have investigated the use of VRML in the production and communication of construction documents, the final phase of architectural building design. A prototype, experimental Web site was set up and used to disseminate design data as VRML models and HTML text to the design client, contractor, and fabricators. In this paper, we discuss the way our construction documents were developed in VRML, the issues we faced implementing it, and critical feedback from the users of the Web space/site. Finally, we suggest ways to enhance the VRML specification which would enable its widespread use as a communication tool in the design and construction industries. CR Categories and Subject Descriptors: 1.3.5 [Computer Graphics]: Computational Geometry and Object Modeling - Curve, surface, solid, and object representations; 1.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism - Virtual Reality; J-6. [Computer Applications]: Computer-aided Engineering - Computer-aided design (CAD), Computer-aided manufacturing (CAM). Additional Keywords: architecture, construction, AEC, design, construction documentation, specifications, Internet, extranet, World Wide Web, VRML, virtual worlds, virtual environments
series	other
email
last changed	2003/04/23 15:50

_id	maver_089
id	maver_089
authors	Chen, Y., Fram, I. and Maver, T.W.
year	1998
title	A Virtual Studio Environment for Design Integration
source	Advances in Engineering Software, vol 29, No 10, 787-800
summary	In this paper the authors attempt to stress the social dimension of design and the role of explicit support for human-level interaction during design systems integration. A human-centred approach is proposed by taking design integration as the collaborative use of design artefacts, and a virtual studio environment (VSE) framework is presented as an integration vehicle to link the social and technical dimensions. A VSE consists of two subsystems: the VSE base system and the domain resources. While common generic facilities for human-human interaction are embedded within the VSE base system, the domain-specific resources are loosely coupled into VSE via resource agents. A VSE prototype for the domain of building design is described, and a demonstration of the use of the VSE prototype is presented. This is then followed by some discussion on related research and further work.
keywords	Design Integration, Collaborative Design, Human-Human Interaction, Virtual Design Studio, Building Design
series	journal paper
email
last changed	2003/09/03 13:23

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	6602
authors	Clayton, Mark J.
year	1998
title	Computing in Civil Engineering 1998
doi	https://doi.org/10.52842/conf.acadia.1998.x.q8w
source	ACADIA Quarterly, vol. 17, no. 4, p. 7
summary	Just before our ACADIA 98 conference, a conference was held in Boston addressing similar issues in the related profession of civil engineering. Sponsored by the American Society of Civil Engineers (ASCE), the conference was titled the International Computing Congress in Civil Engineering and was the fifteenth in the Computing in Civil Engineering series. Although the interests of civil engineers include nonarchitectural subjects such as traffic engineering, bridge building, and sanitation engineering, a large number of participants at the conference identify their area of interest as building engineering. Consequently, the conference addressed many issues of interest to architects. Sessions and presentations at the Congress paralleled those at ACADIA conferences. The World Wide Web was a topic of much discussion, just as it has been at ACADIA conferences. Civil engineering researchers are also exploring how to put courses on the Web, how to use the Internet to support collaboration, and how to distribute product data across the Web.Other papers addressed case-based reasoning, applications of object-oriented programming, expert systems, design education, automated building code checking, and product modeling. Not only did the Congress include a wide range of architecturally relevant topics, it was truly international, including participants from Asia, Europe, Australia, Africa and the Americas.
series	ACADIA
email
last changed	2022/06/07 07:49

_id	ga9921
id	ga9921
authors	Coates, P.S. and Hazarika, L.
year	1999
title	The use of genetic programming for applications in the field of spatial composition
source	International Conference on Generative Art
summary	Architectural design teaching using computers has been a preoccupation of CECA since 1991. All design tutors provide their students with a set of models and ways to form, and we have explored a set of approaches including cellular automata, genetic programming ,agent based modelling and shape grammars as additional tools with which to explore architectural ( and architectonic) ideas.This paper discusses the use of genetic programming (G.P.) for applications in the field of spatial composition. CECA has been developing the use of Genetic Programming for some time ( see references ) and has covered the evolution of L-Systems production rules( coates 1997, 1999b), and the evolution of generative grammars of form (Coates 1998 1999a). The G.P. was used to generate three-dimensional spatial forms from a set of geometrical structures .The approach uses genetic programming with a Genetic Library (G.Lib) .G.P. provides a way to genetically breed a computer program to solve a problem.G. Lib. enables genetic programming to define potentially useful subroutines dynamically during a run .* Exploring a shape grammar consisting of simple solid primitives and transformations. * Applying a simple fitness function to the solid breeding G.P.* Exploring a shape grammar of composite surface objects. * Developing grammarsfor existing buildings, and creating hybrids. * Exploring the shape grammar of abuilding within a G.P.We will report on new work using a range of different morphologies ( boolean operations, surface operations and grammars of style ) and describe the use of objective functions ( natural selection) and the "eyeball test" ( artificial selection) as ways of controlling and exploring the design spaces thus defined.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	5688
authors	Conen, W. and Neumann, G. (eds.)
year	1998
title	Coordination Technology for Collaborative Applications
source	Springer
summary	Given the broad popularity of Internet technology, even in its present immature state, and also the recent progress made towards a human-centered view of information technology, the time now seems ripe to essentially extend the scope and power of enterprise information systems. This carefully arranged book concentrates on the relationships between coordination technology and business application requirements and introduces general elements of a cooperative infrastructure allowing for the construction of collaborative applications. It is essential reading for research and development professionals active in the area as well as for IT managers interested in applying this promising new technology in order to remain competitive in the future.
series	other
last changed	2003/04/23 15:14

_id	0374
authors	De Vecchi, Antonio and Navarra, Laura
year	1998
title	Verification of Building Assemblage Compatability
doi	https://doi.org/10.52842/conf.ecaade.1998.234
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 234-238
summary	A computer program is being elaborated as an aid in designing assembled parts whose assembly presents high degrees of complexity. The newly created program, once incorporated in the CAD sector to increase its potential applications, will facilitate the analysis of reciprocal relationhips between pieces of the assemblage; this will enhance optimum decision-making in terms of geometric and functional characteristics with respect to the previously conceived assembly sequence. The program will automatically create images in three different ways: instantaneous images of assembly stages for each piece of the assembled part; exploded axonometric view of the whole structure with indications of necessary procedures for inserting or connecting the assembled part;sequenced procedures for connecting the assembled part. The different methods of visualization listed above will allow for project verification of the part by means of simultaneous visual analysis of the images and rapid updating should any changes in their properties arise. These types of visualization include simulations of piece by piece assemblage, which will facilitate an "optimal assemblage", meaning a set of components which are assembled in a specific sequence according to their "structural compatibility" and taking into consideration "particular assembly requirements".
series	eCAADe
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/28de_vecchi/index.htm
last changed	2022/06/07 07:55

_id	e5a2
authors	Debevec, P.
year	1998
title	Rendering synthetic objects into real scenes: Bridging traditional and image-based graphics with global illumination and high dynamic range photography
source	Proc. ACM SIGGRAPH 98, M. Cohen, Ed., 189–198
summary	We present a method that uses measured scene radiance and global illumination in order to add new objects to light-based models with correct lighting. The method uses a high dynamic range imagebased model of the scene, rather than synthetic light sources, to illuminate the newobjects. To compute the illumination, the scene is considered as three components: the distant scene, the local scene, and the synthetic objects. The distant scene is assumed to be photometrically unaffected by the objects, obviating the need for re- flectance model information. The local scene is endowed with estimated reflectance model information so that it can catch shadows and receive reflected light from the new objects. Renderings are created with a standard global illumination method by simulating the interaction of light amongst the three components. A differential rendering technique allows for good results to be obtained when only an estimate of the local scene reflectance properties is known. We apply the general method to the problem of rendering synthetic objects into real scenes. The light-based model is constructed from an approximate geometric model of the scene and by using a light probe to measure the incident illumination at the location of the synthetic objects. The global illumination solution is then composited into a photograph of the scene using the differential rendering technique. We conclude by discussing the relevance of the technique to recovering surface reflectance properties in uncontrolled lighting situations. Applications of the method include visual effects, interior design, and architectural visualization.
series	other
last changed	2003/04/23 15:50

_id	38af
authors	Demirkan, H.
year	1998
title	Integration of reasoning systems in architectural modeling activities
source	Automation in Construction 7 (2-3) (1998) pp. 229-236
summary	In the first phase of a design process, the designer understands the problem and assimilates it to a conceptual framework that is already known to him. Due to the nature of design problems, the reasoning methods and techniques for modeling are not uniform and clear. An integrated reasoning system is proposed for modeling the architectural processes. Such a system may help designers to make decisions based on past experiences as well as domain theory. The performance of the integration approach is compared with the pure case-based and rule-based reasoning systems to study the efficiency and effectiveness in the same domains. The study tried to identify the reasoning systems used by designers pertaining to the interior design applications.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: