Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 552

Reformat results as: short short into frame detailed detailed into frame

_id	e72f
authors	Dorta, Tomás and LaLande, Philippe
year	1998
title	The Impact of Virtual Reality on the Design Process
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 138-163
doi	https://doi.org/10.52842/conf.acadia.1998.138
summary	Sketching, either hand or computer generated, along with other traditional visualization tools such as perspective drawing have difficulty in correctly representing three dimensional objects. Even physical models, in architecture, suffer in this regard because of inevitable scaling. The designer finds himself cut off from the reality of the object and is prone to misinterpretations of the object and its surrounding space and to resulting design errors. These are sometimes not perceived until too late, once the object has been constructed. Traditional tools use 2D media to represent 3D objects and only manage to introduce the third dimension in a limited manner (perspectives, not only tedious to construct, are static). This scenario affects the design process, particularly the cycle of proposal, verification and correction of design hypotheses as well as the cognitive aspects that condition the designer’s visualization of the designed object. In most cases, computer graphics mimic, through its interface, the traditional way of doing things. The architectural model is parametricized with little regard for visualization. No allowance is made for the change in the medium of graphic representation. Moreover, effort is not made to capitalize on the advantages of numerical calculation to propose new interfaces and new dimensions in object visualization. Virtual Reality (VR), seen not only as technology but as experience, brings the 3D object, abstractly viewed by traditional means, into clearer focus and provides us with these new dimensions. Errors due to abstracted representation are reduced since the interface is always three dimensional and the interactions intuitively made in real time thus allowing the designer to experience the presence of the designed object very quickly. At the École de design industriel of the Faculté d’aménagement, we have run tests using non-immersive VR–one passive (comprehension) and another active (design). This project, involving a group of 72 students during a period of six weeks (6h/week), aimed at analyzing the impact of VR as a visualization tool on the design process versus traditional tools. The results, described in this presentation, shed light on the effect of VR on the creative process as such, as well as on the quality of the results produced by that process.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	ga9811
id	ga9811
authors	Feuerstein, Penny L.
year	1998
title	Collage, Technology, and Creative Process
source	International Conference on Generative Art
summary	Since the turn of the twentieth century artists have been using collage to suggest new realities and changing concepts of time. Appropriation and simulation can be found in the earliest recycled scraps in Cubist collages. Picasso and Braque liberated the art world with cubism, which integrated all planes and surfaces of the artists' subjects and combined them into a new, radical form. The computer is a natural extension of their work on collage. The identifying characteristics of the computer are integration, simultaneity and evolution which are inherent in collage. Further, the computer is about "converting information". There is something very facinating about scanning an object into the computer, creating a texture brush and drawing with the object's texture. It is as if the computer not only integrates information but different levels of awareness as well. In the act of converting the object from atoms to bits the object is portrayed at the same conscious level as the spiritual act of drawing. The speed and malleability of transforming an image on the computer can be compared to the speed and malleability of thought processes of the mind. David Salle said, "one of the impulses in new art is the desire to be a mutant, whether it involves artificial intelligence, gender or robotic parts. It is about the desire to get outside the self and the desire to trandscend one's place." I use the computer to transcend, to work in different levels of awareness at the same time - the spiritual and the physical. In the creative process of working with computer, many new images are generated from previous ones. An image can be processed in unlimited ways without degradation of information. There is no concept of original and copy. The computer alters the image and changes it back to its original in seconds. Each image is not a fixed object in time, but the result of dynamic aspects which are acquired from previous works and each new moment. In this way, using the computer to assist the mind in the creative processes of making art mirrors the changing concepts of time, space, and reality that have evolved as the twentieth century has progressed. Nineteenth-century concepts of the monolithic truth have been replaced with dualism and pluralism. In other words, the objective world independent of the observer, that assumes the mind is separate from the body, has been replaced with the mind and body as inseparable, connected to the objective world through our perception and awareness. Marshall Mcluhan said, "All media as extensions of ourselves serve to provide new transforming vision and awareness." The computer can bring such complexities and at the same time be very calming because it can be ultrafocused, promoting a higher level of awareness where life can be experienced more vividly. Nicholas Negroponte pointed out that "we are passing into a post information age, often having an audience of just one." By using the computer to juxtapose disparate elements, I create an impossible coherence, a hodgepodge of imagery not wholly illusory. Interestingly, what separates the elements also joins them. Clement Greenberg states that "the collage medium has played a pivotal role in twentieth century painting and sculpture"(1) Perspective, developed by the renaissance archetect Alberti, echoed the optically perceived world as reality was replaced with Cubism. Cubism brought about the destruction of the illusionist means and effects that had characterized Western painting since the fifteenth century.(2) Clement Greenberg describes the way in which physical and spiritual realities are combined in cubist collages. "By pasting a piece of newspaper lettering to the canvas one called attention to the physical reality of the work of art and made that reality the same as the art."(3) Before I discuss some of the concepts that relate collage to working with computer, I would like to define some of the theories behind them. The French word collage means pasting, or gluing. Today the concept may include all forms of composite art and processes of photomontage and assemblage. In the Foreword on Katherine Hoffman's book on Collage Kim Levin writes: "This technique - which takes bits and pieces out of context to patch them into new contexts keeps changeng, adapting to various styles and concerns. And it's perfectly apt that interpretations of collage have varied according to the intellectual inquiries of the time. From our vantage point near the end of the century we can now begin to see that collage has all along carried postmodern genes."(4) Computer, on the other hand is not another medium. It is a visual tool that may be used in the creative process. Patrick D. Prince's views are," Computer art is not concrete. There is no artifact in digital art. The images exist in the computer's memory and can be viewed on a monitor: they are pure visual information."(5) In this way it relates more to conceptual art such as performance art. Timothy Binkley explains that,"I believe we will find the concept of the computer as a medium to be more misleading than useful. Computer art will be better understood and more readily accepted by a skeptical artworld if we acknowledge how different it is from traditional tools. The computer is an extension of the mind, not of the hand or eye,and ,unlike cinema or photography, it does not simply add a new medium to the artist's repertoire, based on a new technology.(6) Conceptual art marked a watershed between the progress of modern art and the pluralism of postmodernism(7) " Once the art is comes out of the computer, it can take a variety of forms or be used with many different media. The artist does not have to write his/her own program to be creative with the computer. The work may have the thumbprint of a specific program, but the creative possibilities are up to the artist. Computer artist John Pearson feels that,"One cannot overlook the fact that no matter how technically interesting the artwork is it has to withstand analysis. Only the creative imagination of the artist, cultivated from a solid conceptual base and tempered by a sophisticsated visual sensitivity, can develop and resolve the problems of art."(8) The artist has to be even more focused and selective by using the computer in the creative process because of the multitude of options it creates and its generative qualities.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	7ad1
authors	Giordano, Rubén F. and Tosello, María Elena
year	1999
title	Laberinto: Una Biblioteca para la Virtualidad. Reflexiones y Acontecimientos en el Cyberespacio (Labyrinth: A Library for Virtuality. Reflections and Events in Cyberspace)
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 83-86
summary	This project investigates in the limits of the word like only means of structuring of the thought, before the appearance of new paradigms: the multimedias and the ciber-space that have transformed so much the language written as the architectural one causing unpublished situations: 1.) The transformation of a concrete container to other virtual. 2.) The transformation of the design object, of one static material to another that is a process. 3.) The transformation in the traditional ways of thinking (reversible as the formal logic of the mathematics) to new imaginarys epistemologicals. // These non alone events have caused changes in the forms of to know and to communicate the reality but rather the same one suffers a dilation process. We present for their exploration, a road synthesized in some hypotheses that were elaborated with reason of the International Competition of ACADIA 1998: 1.) The new communication systems (cibercomunication) they generate a new territory that should be colonized. This territory this conformed by objects related by infinite bonds (hipertext). 2.) The topographical form is not lineal and sequential, this it is multidirectional and multiradial. The phenomenon of the blow-up and the dilation are the mechanisms with those that the new objects are generated. 3.) These related fields generate interstitial empty spaces where it appears the desire. The interstice like existential space.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	170f
authors	Mora Padrón, Víctor Manuel
year	1999
title	Integration and Application of Technologies CAD in a Regional Reality - Methodological and Formative Experience in Industrial Design and Products Development
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 295-297
summary	The experience to present is begun and developed during the academic year 1998, together to the course of IV pupils level of the Industrial Design career in the Universidad del Bío-Bío, labor that I have continued assuming during the present year, with a new youths generation. We have accomplished our academic work taking as original of study and base, the industrial and economic situation of the VIII Region, context in the one which we outline and we commit our needs formative as well as methodological to the teaching of the discipline of the Industrial Design. Consequently, we have defined a high-priority factor among pupils and teachers to reach the objectives and activities program of the course, the one which envisages first of all a commitment of attitude and integrative reflection among our academic activity and the territorial human context in the one which we inhabit. In Chile the activity of the industrial designer, his knowledge and by so much his capacity of producing innovation, it has been something practically unknown in the industrial productive area. However, the current national development challenges and the search by widening our markets, they have created and established a conscience of the fact that the Chilean industrial product must have a modern and effective competitiveness if wants be made participates in segments of the international marketing. It is in this new vision where the design provides in decisive form to consider and add a commercial and cultural value in our products. To the university corresponds the role of transmitting the knowledge generated in his classrooms toward the society, for thus to promote a development in the widest sense of the word. Under this prism the small and median regional industry in their various areas, have not integrated in the national arrangement in what concerns to the design and development of new and integral products. The design and the innovation as motor concept for a competitiveness and permanency in new markets, it has not entered yet in the entrepreneurial culture. If we want to save this situation, it is necessary that the regional entrepreneur knows the importance of the Design with new models development and examples of application, through concrete cases and with demands, that serve of base to demonstrate that the alliance among Designer and Industry, opens new perspectives of growth upon offering innovation and value added factors as new competitiveness tools. Today the communication and the managing of the information is a strategic weapon, to the moment of making changes in a social dynamics, so much at local level as global. It is with this look that our efforts and objective are centered in forming to our pupils with an integration speech and direct application toward the industrial community of our region, using the communication and the technological information as a tool validates and effective to solve the receipt in the visualization of our projects, designs and solutions of products. As complement to the development of the proposed topic will be exhibited a series of projects accomplished by the pupils for some regional industries, in which the three dimensional modeling and the use of programs vectoriales demonstrate the efficiency of communication and comprehension of the proposals, its complexity and constructive possibilities.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	451d
authors	Strong, James and Woodbury, Robert F.
year	1998
title	Psyberdesign: Designing the Cognitive Spaces of Virtual Environments
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 276-288
doi	https://doi.org/10.52842/conf.acadia.1998.276
summary	Increasingly, we find ourselves spending more time on a daily basis engaged in a variety of virtual environments, ranging from those discovered when using the stand-alone computer, to more complex distributed networks such as the World Wide Web. Virtual environments are not restricted to the popular and hyped notion of immersive Virtual Reality systems, though, in immersion, such systems provide a dimension of experience sorely lacking in most human-computer interfaces. The design of a diverse range of virtual environments, from textual through to three dimensional, would seem to require insight from those who habitually create immersive experiences, whether real or virtual. The former include architects, the latter the authors of computer games. Virtual environments such as the Internet, and the World Wide Web in particular, are becoming increasingly confusing to navigate. Exploratory behaviour in these environments requires extensive cognitive effort, and often results in disorientation and a sense of anxiety. This paper attempts to address issues of cognitive mapping in virtual environment design, and the exciting role that architects should occupy in the creation of better virtual environments. A virtual environment tool, called WOMBAT, has been developed to discover more about the relationship between real environment and virtual environment navigation and cognitive mapping, and consequently the degree to which concepts and theories from real environment design and cognitive mapping research can be translated to the virtual environment domain. Both a natural environment and an information environment are being investigated using WOMBAT, with the primary interest being the cognitive mapping and wayfinding activities that are exhibited during exploration.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	dd16
authors	Gibson, Kathleen
year	1999
title	STUDIO @ CORNELL
source	ACADIA Quarterly, vol. 18, no. 2, pp. 18-21
doi	https://doi.org/10.52842/conf.acadia.1999.018.2
summary	Unique to the interior design program at Cornell University is a planned pedagogical approach requiring equal emphasis toward manual and digital graphic communication at the freshman level. Prior to 1998, computer-based instruction only occurred at the junior year of study. Recognizing that cultural and symbolic biases against digital media were formally being instituted by curriculum policy, faculty searched for a new perspective. Central to success was the removal of illogically placed boundaries, both mental and physical. In response, students are now encouraged to cultivate a fluid dexterity between traditional and digital methods, at times using various skills concurrently for design analysis and representation (Figures 1, 2, 3, 4, 5, 6, 7). Course content for DEA115 ranges from basic orthographic drafting, paraline projection, and perspective drawing to color rendering and composition. Students utilize a full range of media: pencil, ink, marker, pastel, AutoCAD, 3DS/ MAX, and Photoshop in this graphics studio. Course meetings total six contact hours per week, constituting a three credit hour class. Assignments are purposefully created to shatter digital myths. For example, instead of a standard, rote drafting exercise, AutoCAD is used to explore design ideas through systemic object manipulation (Figures 8, 9).
series	ACADIA
last changed	2022/06/07 07:51

_id	338a
authors	Noble, Douglas and Hsu, Jason
year	1999
title	Computer Aided Animation in Architecture: Analysis of Use and the Views of the Profession
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 109-114
summary	A traditional way to present three-dimensional representations of architectural design has been through the use of manually drawn perspective drawings. The perspective representation assists in the comprehension of the forms and spaces, but is difficult to manually generate. The computer revolution made perspectives much easier to generate and led to a dramatically increased use of three-dimensional representation as a presentation technique. We are just now seeing substantial uses of animation as a communication and presentation tool in architecture. This paper documents the results of two surveys of the architectural profession that sought to discover the current and near future intentions for the use of computer animation. Our belief is that current levels of computer animation use are low, but that many firms intend to start using animation both as a design and presentation tool. In early 1998 we conducted a survey of the uses of computer animation by architectural firms. We posited a set of 14 related hypotheses. This paper represents the tabulated results from 82 completed surveys out of 620 requests. While some level of confidence can be obtained from this sample size, we are publishing in the hope of encouraging continued response to the survey.
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	48db
authors	Proctor, George
year	2001
title	CADD Curriculum - The Issue of Visual Acuity
source	Architectural Information Management [19th eCAADe Conference Proceedings / ISBN 0-9523687-8-1] Helsinki (Finland) 29-31 August 2001, pp. 192-200
doi	https://doi.org/10.52842/conf.ecaade.2001.192
summary	Design educators attempt to train the eyes and minds of students to see and comprehend the world around them with the intention of preparing those students to become good designers, critical thinkers and ultimately responsible architects. Over the last eight years we have been developing the digital media curriculum of our architecture program with these fundamental values. We have built digital media use and instruction on the foundation of our program which has historically been based in physical model making. Digital modeling has gradually replaced the capacity of physical models as an analytical and thinking tool, and as a communication and presentation device. The first year of our program provides a foundation and introduction to 2d and 3d design and composition, the second year explores larger buildings and history, the third year explores building systems and structure through design studies of public buildings, fourth year explores urbanism, theory and technology through topic studios and, during the fifth year students complete a capstone project. Digital media and CADD have and are being synchronized with the existing NAAB accredited regimen while also allowing for alternative career options for students. Given our location in the Los Angeles region, many students with a strong background in digital media have gone on to jobs in video game design and the movie industry. Clearly there is much a student of architecture must learn to attain a level of professional competency. A capacity to think visually is one of those skills and is arguably a skill that distinguishes members of the visual arts (including Architecture) from other disciplines. From a web search of information posted by the American Academy of Opthamology, Visual Acuity is defined as an ability to discriminate fine details when looking at something and is often measured with the Snellen Eye Chart (the 20/20 eye test). In the context of this paper visual acuity refers to a subject’s capacity to discriminate useful abstractions in a visual field for the purposes of Visual Thinking- problem solving through seeing (Arnheim, 1969, Laseau 1980, Hoffman 1998). The growing use of digital media and the expanding ability to assemble design ideas and images through point-and-click methods makes the cultivation and development of visual skills all the more important to today’s crop of young architects. The advent of digital media also brings into question the traditional, static 2d methods used to build visual skills in a design education instead of promoting active 3d methods for teaching, learning and developing visual skills. Interactive digital movies provide an excellent platform for promoting visual acuity, and correlating the innate mechanisms of visual perception with the abstractions and notational systems used in professional discourse. In the context of this paper, pedagogy for building visual acuity is being considered with regard to perception of the real world, for example the visual survey of an environment, a site or a street scene and how that visual survey works in conjunction with practice.
keywords	Curriculum, Seeing, Abstracting, Notation
series	eCAADe
email
last changed	2022/06/07 08:00

_id	9
authors	Stipech, Alfredo
year	1998
title	Un Nuevo Horizonte Arquitectonico, Productivo e Intelectual (A New Architectural, Productive and Intelectual Horizon)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 76-83
summary	This work presents the pedagogical experience of a Design Workshop that investigated the impact of the digital and analogic means on the architectonic design process This work was based on the research of Dr. Arch. Julio BermÝdez who also directed this workshop in 1997. This class was part of the Training Program organized by the "Centro de Informatica y Diseho" (CID) at the "Universidad Nacional del Litoral" FADU (Facultad de Arquitectura Diseho y Urbanismo) Santa Fe, Argentina and made possible by the ongoing International Program of Academic Exchange between the FADU and the (University of Utah Graduate School of Architecture (IPAE Project NO 4). The experimental studio utilized an architectural problem to study the procedural, technical, interpretative and theoretical issues associated with the relationship of contemporary media and design process. The pedagogical vehicle was a program that expresses in itself the meeting or collision between two cultures competing for dominance at the end of the millennium: the immemorial material culture (corporeal, tectonic) and the new and everyday more influent virtual culture (information, nets, media, simulation). The premise for the design process, communication and criticism was the constant migration between the digital and analog representation systems. Within this theoretical-practical context semantic aspects containing different representation modalities were used such as physical and electronic models along with systematic and sensitive drawings (manuals, pixels and with CAD). Hybrid interfaces took a leading role in the process since they allowed the communication between analog and digital media through the creative and technical interaction between scanner, video and computer. This architectural and media context generated an intense pedagogic environment fostering the development of creativity and a critical attitude while allowing concrete breakthroughs in the teaching process and format design. Our work reflects on these results showing examples of stud-go works and providing a final evaluation of this unique experience in Argentina.
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	ecaade03_373_117_wittkopf
id	ecaade03_373_117_wittkopf
authors	Wittkopf, Stephen K. and Foo, E-Jin
year	2003
title	Discussing Image-Based Modeling Technology for 3D Digital Archival of Physical Architecture Models
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 373-380
doi	https://doi.org/10.52842/conf.ecaade.2003.373
summary	Besides drawings, physical models are important forms of representation commonly used for architectural design. They can serve as a useful resource for teaching and research, provided there is a proper archiving system that allows easy retrieval. Architectural models in 3D digital format seem to be able to overcome the limitation of physical constraints – they can be easily accessed anytime and anywhere over the Internet. The most common way of 3D model documentation is through geometric-based 3D CAD software. Image-based modeling (IM) allows the 3D digital model to be created from photographic images. Debevec (1998) investigated the hybrid geometry- and image-based approach whilst Tsou (2002) and Hawkins (2001) focused on the application of IM for GIS and digitizing cultural artifacts respectively. This paper aims to compare physical models and their IM counterparts in terms of communication of vital architectural information. Experiments were conducted to evaluate the extent the IM model resembled the physical predecessor in terms of its geometry and visual appearance qualities/faithfulness. A survey was subsequently carried out to compare their performance in terms of the communication of vital architectural information about building designs to the observers. The tabulated results were then examined to help understand the opportunities and weakness of IM for 3D archival of physical architecture models
keywords	Image-based modeling, architecture model, digital archiving, design resource
series	eCAADe
email
more	http://www.arch.nus.edu.sg/akiskw
last changed	2022/06/07 07:57

_id	487c
authors	Blazquez, Oscar and Hardin, Mary
year	1998
title	Balancing Computer Use and Design Content in Studio Projects
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 36-43
doi	https://doi.org/10.52842/conf.acadia.1998.036
summary	Particular design approaches must be taught in order to take advantage of the strengths of computers in design rather than attempting to make computers conform to methods developed as by-products of manual design techniques. For the last three years our team of faculty teaching the second year design studio has been trying different approaches to the use of computers in design, in order to find the advantages and opportunities especially suited to electronic media. There are several projects during the semester which use computers at different stages of the design process. One of these projects, called “A Spatial Sequence,” uses information from a previous project as well as the knowledge from the computer class in parallel to design studio. The project asked students to create spatial archetypes based on the work of well-known architects. They explore the following topics as represented in the work of one particular architect: relationships of major spaces/minor spaces, approach/entry, and transition/threshold. Following the analysis, they create digital models to explore the spaces formed by their archetypes. Before committing to a physical study model, they look at the transitions between spaces by creating a sequence using the digital model and producing a series of shots through the digital model to show the flow of spaces. The use of computer through the process accelerates the options available to explore a sequence of elements, while simultaneously giving them a window to look into the spaces they have created. This hybridized approach of precedent analysis, digital modeling, and physical modeling was uniquely suited to the studio problem.
series	ACADIA
email
last changed	2022/06/07 07:52

_id	59
authors	Ozel, Filiz
year	1998
title	Geometric Modeling intThe Simulation of Fire - Smoke Spread in Buildings
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 438-445
summary	Since the performance simulation of buildings, such as fire/smoke spread, energy loss/gain, acoustics, etc. greatly rely on building geometry, the way the physical environment is modeled can substantially effect the reliability of the predictions made by such simulations. Most computer models that simulate fire and smoke spread in buildings limit the computer representation of the building to simpler geometries and define rooms as rectangular spaces or as spaces with uniform crossections. Such a definition does not account for the variety of building elements that can exist in a building such as large overhangs, half height walls, etc. Existing simulations are typically developed as mathematical models and use the principles of thermodynamics to represent the spread of the elements of fire through space over a given time period. For example, in zone models each room is defined as a two tier space with heat and smoke exchange between lower and upper tiers as the fire progresses. On the other hand, field models divide the space into small contiguous units where thermodynamic state of each unit is calculated as the simulated fire progresses. Dynamic processes such as fire and smoke spread must recognize both intangible (i.e. voids) and tangible (i.e. solids such as walls, balconies, ceiling, etc.) architectural entities. This paper explores the potential of solid modeling techniques in generating geometric definitions for both solid and void architectural entities that can interact With mathematical models of fire/smoke spread in buildings. The implications of cellular spatial partitioning techniques for zone or field models of fire/smoke spread are investigated, and the methods of creating cellular decomposftion models for architectural spaces as well as for spatial boundaries such as walls are explored. The size of each cellular partition, i.e. the resolution of the partition, and the material and heat transfer attributes of each cell were found to be very critical in modeling the spread fire through voids as well as through solids in a building.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	0f4c
authors	Asanowicz, Aleksander
year	1998
title	From Real to Cyber Reality
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 11-19
summary	Human activity takes place in two planes, at two levels. Practical activity is present in one of the planes, the other level is occupied by purely cognitive activity. When observing sufficiently long sequences of practical and cognitive activities, one notices transitions between them, which prove true the suspicions of their functional relationship. Because on both of these planes of human activity there is always one and the same element present - an informative element - which on the first plane functions as subordinate, and in the other as an independent one, one can search for a common characteristic for both planes. Such common characteristic for both levels of human activity can be perceived in the fact that in both situations the activity of a human is based on CREATION. Human thinking is based on transitions between what is accessible through experience and what is referred to conceptually. The human thought exists only and exclusively in the vertical motion: from the phenomenal level to the structural level direction of abstraction) and from the conceptual level to the empirical level direction of concretisation). All human activity is multilayered or, more precisely, it is an activity within many layers: the sensual one as well as the structural one. The appearance of conceptual thinking has created a qualitatively new type of a situation. This novelty can be easily seen both in the sphere of the practical cognitive activity as well as in the sphere of the pure cognitive activity. In both cases, the cognitive activity of a human is of a "double-decker" character: image and concept. It is necessary to note here that the "image" does not only mean structural, concrete, but also one which is purely visual, abstract, of no physical form. Therefore, the human experience, being the result of the cognitive activity, is being expressed, becoming objective, materialising in two different but compatible ways. Firstly, in the material structures of practical significance - this way the material culture is created. Secondly - in material structures which have no practical meaning but are solely used for expressing the spiritual contents - thus creating the spiritual culture. Humans have developed an extraordinarily strong need for spiritual activity, which is manifested by the material activity, redundant from the point of view of the material needs.
series	plCAD
email
last changed	2003/05/17 10:01

_id	c0e0
authors	Campbell, Dace
year	1998
title	Architectural Construction Documents on the Web: VRML as a Case Study
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 266-275
doi	https://doi.org/10.52842/conf.acadia.1998.266
summary	The Virtual Reality Modeling Language (VRML) and the World Wide Web (WWW) offer new opportunities to communicate an architect’s design intent throughout the design process. We have investigated the use of VRML in the production and communication of construction documents, the final phase of architectural building design. A prototype, experimental Web site was set up and used to disseminate design data as VRML models and HTML text to the design client, contractor, and fabricators. In this paper, we discuss the way our construction documents were developed in VRML, the issues we faced implementing it, and critical feedback from the users of the Web space/site. We analyze the usefulness of VRML as a communication tool for the design and construction industries. Finally, we discuss technical, social, and legal issues the AEC industry faces as it shifts to embrace widespread use of a “paperless” Web-based communications infrastructure for design documentation.
series	ACADIA
email
last changed	2022/06/07 07:54

_id	032b
authors	Cicognani, Anna
year	1998
title	A linguistic characterisation of design in text-based virtual worlds
source	University of Sydney
summary	In this research, it is suggested that design in text-based virtual worlds can be identified as a series of interactions between users and the virtual environment, and that these interactions for design can be approached using a linguistic perspective. The main assumption of this research is that a parallel can be drawn between the performance of design commands, and the one of speech acts in the physical world. Design in text-based virtual environments can then be articulated using a restricted set of speech acts, as design commands. Virtual worlds, represented as spaces, can be constructed following an architectural design metaphor. This metaphor provides a framework for the organisation of virtual entity relationships, and for the choice of words used to design. A linguistic characterisation is presented, by means of design activities, prototypes and scenarios, which derive from the architectural design metaphor. The characterisation of design is then validated by the analysis of an existing text-based virtual world.
keywords	Virtual Reality; Human-Computer Interaction; Computer-Aided Design; Programming Languages (Electronic Computers); Semantics; Programming Languages (Electronic Computers); Design
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	2de0
authors	Dobson, Adrian
year	1998
title	Exploring Conceptual Design using CAD Visualisation and Virtual Reality Modelling
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 68-71
doi	https://doi.org/10.52842/conf.ecaade.1998.068
summary	This paper evaluates the possibilities for the use of computer aided design and desktop virtual reality technologies as tools for architectural composition. An experimental teaching programme involving undergraduate architectural students at the University of Luton, in which aspects of compositional theory are explored through the direct creation of architectural form and space in digital formats is described. In the programme principles of architectural composition, based upon the ordering and organisation of typological architectural elements according to established rules of composition are introduced to the students through the study of recognised works of design theory. CAD and desktop virtual reality are then used to define and manipulate architectural elements, and to make formal and spatial evaluations of the environments created. The paper describes the theoretical context of the work, assesses the suitability of the software used for performing compositional manipulations, and evaluates the qualities of immersion and intuitive feedback which virtual reality based modelling can offer in the design visualisation process. The teaching programme utilises standard software packages, including AutoCAD, and 3D Studio, as well as Superscape VRT, a PC based desktop VR package.
series	eCAADe
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/13dobson/index.htm
last changed	2022/06/07 07:55

_id	1d83
authors	Dodge, M., Doyle, S. and Smith, A.
year	1998
title	Visual Communication in Urban Planning and Urban Design
source	Working Paper 2; Centre for Advanced Spatial Analysis Working Papers; London; June 1998
summary	This Case Study documents the current status of visual communication in urban design and planning. Visual communication is examined through discussion of standalone and network media, specifically concentrating on visualisation on the World Wide Web (WWW). First, we examine the use of Solid and Geometric Modelling for visualising urban planning and urban design. This report documents and compares examples of the use of Virtual Reality Modelling Language (VRML) and proprietary WWW based Virtual Reality modelling software. Examples include the modelling of Bath and Glasgow using both VRML 1.0 and 2.0. The use of Virtual Worlds and their role in visualising urban form within multi-user environments is reviewed. The use of Virtual Worlds is developed into a study of the possibilities and limitations of Virtual Internet Design Arena's (ViDA's), an initiative undertaken at the Centre for Advanced Spatial Analysis, University College London. The use of Virtual Worlds and their development towards ViDA's is seen as one of the most important developments in visual communication for urban planning and urban design since the development plan. Secondly, the role of photorealistic media in the process of communicating plans is examined. The process of creating photorealistic media is documented, and examples of the Virtual Streetscape and Wired Whitehall Virtual Urban Interface System are provided. The conclusion is that, although the use of photo-realistic media on the WWW provides a way to visually communicate planning information, its use is limited. The merging of photorealistic media and solid geometric modelling in the creation of Augmented Reality is reviewed. Augmented Reality is seen to provide an important step forward in the ability quickly and easily to visualise urban planning and urban design information. Third, the role of visual communication of planning data through GIS is examined in terms of desktop, three dimensional, and Internet based GIS. The evolution to Internet GIS is seen as a critical component in the development of virtual cities that will allow urban planners and urban designers to visualise and model the complexity of the built environment in networked virtual reality. Finally, a viewpoint is put forward of the Virtual City, linking Internet GIS with photorealistic multi-user Virtual Worlds. At present there are constraints on how far virtual cities can be developed, but a view is provided on how these networked virtual worlds are developing to aid visual communication in urban planning and urban design.
series	other
last changed	2003/04/23 15:50

For more results click below: