Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 554

Reformat results as: short short into frame detailed detailed into frame

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	c5bc
authors	Popova, Mina
year	1998
title	Model of Design Parts and its Use to the Design Team
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 233-242
doi	https://doi.org/10.52842/conf.caadria.1998.233
summary	This paper discusses the impact of the choice of representation on the final result in design and construction projects. Representation is an integrated part of the design process used by architects as a communication tool to help them present a concept to their clients and other consultants. The representation choice, in addition, reflects the professional’s perception of the design process and the architectural artefact. Architects’ offices work with a wide range of problems - aesthetic and spatial issues, detailing, choice of materials, and systems design. The multiplicity of representations enriches the understanding of these issues. Today, the model-oriented approach in design is common among both architects and leading software producers for the construction industry. While STEP (Standard for the Exchange of Product Data) aims at developing very comprehensive product models, we examine the possibility of building up a small-scale model responding to the information needs of a design team. In our research work, we view a model of design parts as a suitable carrier of information allowing the designers to store data reflecting their accumulated and refined professional knowledge and experience. Besides, the team of architects can later easily retrieve information needed for future design reuse from the model. To reuse design solutions and learn from previous work is an essential part of the professional culture. The construction industry as a whole has been slow in implementing information technology to improve the work methods. Neither have architects’ offices used the full potential of this technology to structure information and rationalize the design process. The objective of this study is to examine whether information technology makes it possible to organize all the design information in an office archive. The proposed model of design parts relates to national standards and universal models for product data representation and exchange, such as STEP. Today, the construction sector is becoming increasingly aware of the potential of the model-oriented approach both to rationalize the design and construction process and offer designers new options to store, broaden and reuse professional knowledge. We have used the information modelling language EXPRESS to describe our concept.
keywords	Design and Construction Process, Model-oriented Approach, Representation, Information Technology, STEP
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 08:00

_id	c11a
authors	Campbell, D.A.
year	1998
title	VRML In Architectural Construction Documents: A Case Study
source	VRML 98 Monterey - Proceedings of the 1998 VRML Conference, pp. 115-120
summary	The Virtual Reality Modeling Language (VRML) and the World Wide Web (WWW) offer new opportunities to communicate an architect's design intent throughout the design process. We have investigated the use of VRML in the production and communication of construction documents, the final phase of architectural building design. A prototype, experimental Web site was set up and used to disseminate design data as VRML models and HTML text to the design client, contractor, and fabricators. In this paper, we discuss the way our construction documents were developed in VRML, the issues we faced implementing it, and critical feedback from the users of the Web space/site. Finally, we suggest ways to enhance the VRML specification which would enable its widespread use as a communication tool in the design and construction industries. CR Categories and Subject Descriptors: 1.3.5 [Computer Graphics]: Computational Geometry and Object Modeling - Curve, surface, solid, and object representations; 1.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism - Virtual Reality; J-6. [Computer Applications]: Computer-aided Engineering - Computer-aided design (CAD), Computer-aided manufacturing (CAM). Additional Keywords: architecture, construction, AEC, design, construction documentation, specifications, Internet, extranet, World Wide Web, VRML, virtual worlds, virtual environments
series	other
email
last changed	2003/04/23 15:50

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ca7b
authors	Howes, Jaki
year	1999
title	IT or not IT? An Examination of IT Use in an Experimental Multi-disciplinary Teamwork Situation
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 370-373
doi	https://doi.org/10.52842/conf.ecaade.1999.370
summary	Leeds Metropolitan University is well placed to carry out research into multi-disciplinary team-working, as all the design and construction disciplines are housed in one faculty. Staff have set up an experimental project, TIME IT (Team-working in Multi-disciplinary Environments using IT) which examines ways of working in the design/construction process and how IT is used when there is no commercial pressure. Four groups of four students, one graduate diploma architect, and one final year student from each of Civil Engineering, Construction Management and Quantity Surveying have been working on feasibility studies for projects that are based on completed schemes or have been devised by collaborators in the Construction Industry. Students have been asked to produce a PowerPoint presentation, in up to five working days, of a design scheme, with costs, structural analysis and construction programme. The students are not assessed on the quality of the product, but on their own ability to monitor the process and use of IT. Despite this, aggressive competition evolved between the teams to produce the 'best' design. Five projects were run in the 1998/99 session. A dedicated IT suite has been provided; each group of students had exclusive use of a machine. They were not told how to approach the projects nor when to use the available technology, but were asked to keep the use of paper to a minimum and to keep all their work on the server, so that it could be monitored externally. Not so. They plotted the AO drawings of an existing building that had been provided on the server. They like paper - they can scribble on it, fold it, tear it and throw it at one another.
keywords	IT, Multi-disciplinary, Teamwork
series	eCAADe
email
last changed	2022/06/07 07:50

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	4d85
authors	Shimokawa, Y., Morozumi, M., Iki, K. and Homma, R.
year	1998
title	Replacement and Transformation as a Key to Schematic Design Thinking - 3-D Modeling System which Supports Design Thinking
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 365-374
doi	https://doi.org/10.52842/conf.caadria.1998.365
summary	This paper analyses a prototype of a 3D modeling system that can support schematic design development and begins with very abstract representation elaborates it step by step into a detailed representation. Using Mitchell's concept of a TOPDOWN system for 2D sketches as the basis, the authors proposed a design process model and a prototype that allows both bottom up additive processes in exploring the design frame and top down processes for the design refinement of each building element. Various utilities of replacing and transforming graphic objects as well as those that can control shapes and the location of those objects with construction lines have been proposed. The authors discussed possible use of the system and topics for future study by reviewing case studies.
keywords	Replacement Operation, Modeling System, Schematic Design, Design Thinking
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:56

_id	37ae
authors	Tarandi, Väino
year	1998
title	Neutral intelligent CAD communication: information exchange in construction based upon a minimal schema
source	KTH Stockholm
summary	An improved information exchange is frequently proposed as one solution to the inefficiency problems which the construction industry is suffering from today. Such an improvement is very dependent of the use of information technology, IT. To enable an advanced use of IT, there is a need for integrated project communications frameworks and integrated industry wide information. This thesis discusses how product models can be used to improve the information exchange from design to construction. Today there are several approaches to product modelling. Some researchers propose very detailed models whereas others propose generic models with fewer concepts. In this area there is a close connection between research and standardisation, which is carried out by organisations such as the ISO STEP committee and the International Alliance for Interoperability. To get acceptance for a standard proposal, it has to be accepted by both users and standardisation bodies. Thus this research, in addition to the technical requirements on information content and structure, also discusses success factors for standardisation, implementation and usage. In order to define important requirements on a product model for information exchange between design and construction, current research, development and standardisation in the field of product modelling was studied. This thesis advocates a minimal approach in the number of concepts used in a product model, in combination with an external building element classification, following national industry practice. The minimal NICC schema, developed during this research, was tested in a prototype and test study. Three applications were tested: PreFacto (planning tool), Microsoft Project (time scheduling tool) and Calc3(cost estimation tool). From the CAD-system MCAD, NICC files with the building objects were created and transferred into a relational database from which the three applications received their specific input files. The results of the evaluation of the NICC schema and the test study demonstrated that a product model based on few concepts can manage the required information exchange.
keywords	Construction; Product Models; Standardisation; Minimal Models; Requirements; Conceptual Schema
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	fb22
authors	Chien, Sheng-Fen
year	1998
title	Supporting information navigation in generative design systems
source	Camegie Mellon University, School of Architecture
summary	Generative design systems make it easier for designers to generate and explore design altematives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed to enable designers to access the information with ease. Such aids may improve the usability of generative design systems and encourage their use in architectural practice. This dissertation presents a comprehensive approach to support navigation in generative design systems. This approach takes account of studies related to human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. It contains a general model of design space, basic navigation operations, and principles for designing navigation support. The design space model describes how the space may grow and evolve along predictable dimensions. The basic operations facilitate navigation activities in this multi-dimensional design space. The design principles aim at guiding system developers in creating navigation utilities tailored to the needs of individual design systems. This approach is validated through prototype implementations and limited pilot usability studies. The validity of the design space model and basic navigation operations is examined through the development of a design space navigation framework that encapsulates the model and operations in a software environment and provides the infrastructure and mechanisms for supporting navigation. Three prototype navigation tools are implemented using this framework. These tools are subjected to usability studies. The studies show that these tools are easy to leam and are efficient in assisting designers locating desired information. In summary, it can be demonstrated that through the prototype implementations and usability studies, this approach offers sufficient support for the design and implementation of navigation aids in a generative design system. The research effort is a pioneer study on navigation support in generative design systems. It demonstrates why navigation support is necessary; how to provide the support; and what types of user interaction it can offer. This research contributes to information navigation studies not only in the specific domain of generative design system research, but also in the general field of human-computer interaction.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	074a
authors	Gross, M.D., Do, E.Y., McCall, R.J., Citrin, W.V., Hamill, P., Warmack, A. and Kuczun, K.S.
year	1998
title	Collaboration and coordination in architectural design: approaches to computer mediated team work
source	Automation in Construction 7 (6) (1998) pp. 465-473
summary	The paper reports on three projects at our laboratory that deal respectively with synchronous collaborative design, asynchronous collaborative design, and design coordination. The Electronic Cocktail Napkin and its mobile extension that runs on hand-held computers supports synchronous design with shared freehand drawing environments. The PHIDIAS hypermedia system supports long-term, asynchronous collaboration by enabling designers of large complex artifacts to store and retrieve rationale about design decisions and the Construction Kit Builder (CKB) supports team design by supporting a priori agreements among team members to avoid conflicts.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	c373
authors	Baldwin, A.N., Austin, S.A., Hassan, T.M. and Thorpe, A.
year	1998
title	Planning building design by simulating information flow
source	Automation in Construction 8 (2) (1998) pp. 149-163
summary	Successful project management requires the effective control of the design teams and the exchange of information between them for successful design management. This paper describes a methodology involving discrete event simulation that can help the planning and control of building design. Discipline-based information flow models of the building design process are used to define the activities of the simulation model, concentrating on the concept and schematic design stages. Factors such as task durations and resources are then allocated along with any specific constraints that are to be evaluated. The model predicts the outcomes of the specific scenario of information related events, including design schedules and resource histograms. The paper describes the development and validation of the simulation model and discusses its potential application during the planning and design phases of building projects. It is concluded that this approach could form the basis of a useful tool for design managers responsible for multidisciplinary building design work.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	c304
authors	Barber, T.and Hanna, R.
year	1998
title	Appraisal of Design Studio Methodologies
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 21-30
doi	https://doi.org/10.52842/conf.caadria.1998.021
summary	This paper investigates the relationship between different design approaches and their effectiveness in the formulation of design concepts. This inquiry will focus on the computer as the sole design and developmental tool. The research employs a short design programme, a small building with a given urban site, as its investigative vehicle. Nineteen second year students of the Mackintosh School of Architecture were monitored and their design progress evaluated. They were split into two groups: one used CAD and AEC as the only drawing and modelling tool, tutorial and review, and another used conventional tools of drawing and model making (mixed media). Structured interviews and personal observations were used as a means for data collection. Questionnaires were administered to students and their response was analysed using the statistical programme SPSS (Statistical Package for the Social Sciences). The Mann-Whitney test was used to test the Null Hypothesis that different design approaches will not produce different design outcomes. Correlation, Regression and the X2 test of independence were also employed to screen data and identify patterns of relationships.
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:54

_id	ddss9810
id	ddss9810
authors	Celebi, Gulser
year	1998
title	Development of a Building System
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The universal principle of architecture can be defined as follows: “The architectural product is the synthesis of the different man-made physical environments that are formed by locating the series of building components in different ways”. Within this context; it is necessary to determine the principle of building assembly and the assembly of ‘material components’ in order to produce the building. The material components are the elements of sub systems (such as; structural, envelope, services, partitions, circulation, and finishing systems) which form the building system of an architectural product. Every building is an integrated product. Integration defines the relations of sub systems with the whole. Therefore, it is necessary to define the sub systems and their relations in realizing the architectural product. This paper presents the analysis principles of the sub-systems, relationship between the analyzed systems and components, integration principles and possibilities of them, and the future conditions.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	7560
authors	Gomez, Nestor
year	1998
title	Conceptual Structural Design Through Knowledge Hierarchies
source	Carnegie Mellon University, Department of Civil and Environmental Engineering, Pittsburgh
summary	Computer support for conceptual design still lags behind software available for analysis and detailed design. The Software Environment to Support the Early Phases in Building Design (SEED) project has the goal of providing design generation and exploration capabilities to aid in the conceptual design of buildings, from architectural programming and layout to enclosure design and structural configuration. The current work presents a component of the efforts of the SEED-Config Structure group in providing computer support for conceptual structural design. The Building Entity and Technology (BENT) approach models data about building elements in a general, hierarchical form, where design evolution is represented by the growing specificity of the design description. Two methods of system-supported design generation are provided: case-based reasoning and application of knowledge rules. The knowledge rules, termed technologies, and how they are specified and used are the primary focus of this thesis. In the BENT approach, conceptual structural engineering knowledge is modularized into technology nodes arranged in a directed 'AND/OR' graph, where OR nodes represent alternative design decisions and AND nodes represent problem decomposition. In addition, nodes in the graph may also be specified as having AND/OR incoming arcs thus reducing the duplication of nodes and enhancing the representational power of the approach. In order to facilitate the incorporation of new knowledge into the system, and verify and/or change the knowledge already in the system, the data model and the interface allow for dynamic creation, browsing, and editing of technology nodes. Design generation through the use of the knowledge hierarchy involves the conditional application of nodes according to the design context as represented by the building element(s) under consideration. Each application of a technology node expands the design of building elements by increasing the detail of the design description or by decomposing the elements into less abstract components. In addition, support for simultaneous design of multiple elements and for iteration control are also provided. An important feature of the BENT approach is that the generative knowledge (i.e., the technology hierarchy) is detached from the information repository (i.e., the database of entities which make up the building). This allows the technology hierarchies to be used in a modular fashion from building problem to building problem.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	f448
authors	Hermann, M., Kohler, N., Koenig, H. and Luetzkendorf, T.
year	1998
title	CAAD System with Integrated Quantity Surveying, Energy Calculation, and LCA
source	Proceedings: Green Building Challenge 98, Vancouver, Canada. Vol. 2, 68 - 75
summary	In the framework of the German LEGOE project, an integrated tool is developed for computer aided architectural design (CAAD), quantity surveying (catalogue of building elements), life cycle cost calculation and estimation (construction and refurbishment), direct energy consumption (heating, hot-water, electri-city) and environmental impact assessment (mass flows and effect oriented evaluation). During the design process the architect works in his usual CAAD environment with building elements (e.g. one m2 of outer wall) which in turn are composed of detailed construction specifications, energy and mass flow coefficients and cost data. These elements are part of an independent catalogue of elements with all their relevant data. The different application programs use the same basic data and write the specific results into a project-specific database called a PDB which allows the comparison of these data to reference data from other projects. Evaluation and visualisation programs refer to the PDB only.
series	other
last changed	2003/04/23 15:50

_id	68fb
authors	Khemlani, L., Timerman, A., Benne, B. and Kalay, Y.E.
year	1998
title	Intelligent representation for computer-aided building design
source	Automation in Construction 8 (1) (1998) pp. 49-71
summary	At the core of any computational system that can support design development, analysis, and evaluation is an “intelligent” building representation which should be able to represent all the different components that make up a building, along with the manner in which they come together. In other words, the representation must be informationally complete and semantically rich. The paper discusses these two criteria and briefly reviews other research efforts aimed at developing building representations for computer-aided design that attempt to meet them. Our solution to this problem is then presented. It is aimed primarily at the schematic design phase, the rationale for which is also stated. Taking the view that buildings are unique assemblies of discrete, mostly standardized components, our representation is clearly divided into two components: the Object Database (ODB) which stores detailed information about various building elements, and the Project Database (PDB) which holds information about how these elements are assembled to make up a particular building. An ODB may be shared by many building projects, while the PDB must necessarily be unique to each. The data schemas of both the PDB and the ODB are described in detail and their computational implementation, to the extent that it has been completed, is illustrated.
series	journal paper
last changed	2003/03/05 13:12

_id	4ae8
authors	Kokosalakis, Jen, Hohmann, L.M. and Pamplin, I.
year	1999
title	Benefits of Data Integration in Building Modelling: 3D Object Oriented Professional Collaboration
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 103-130
summary	This paper will review current progress across the building construction industry in meeting demands for use of data integration with the 3D building model as the coordinating device in building design and development. Decades of national initiatives from NEDO (1990) to Egan (1998) have striven to encourage collaboration in first the building design team and later targetting in programmas the means to accomplish this. In its 14th year 'The User Group' has intensified efforts to persuade the industry of the benefits of associating all data involved from the first briefing and conception of design needs and ideas, through the development of the design, testing for structures, costs, heating, lighting, urban and rural environmental impact, facilities management, adaptation and even the eventual controlled demolition of the building. Examples in this paper will be reported from 'The User Group' conference, "Profit from Data Integration: An industry update", (NEC, Birmingham, Nov. 1998), to indicate how various organisations are now profiting from data integration in 3D object orientated modelling.
series	AVOCAAD
email
last changed	2005/09/09 10:48

For more results click below: