Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 544

Reformat results as: short short into frame detailed detailed into frame

_id	a037
authors	Aygen, Z. and Flemming, U.
year	1998
title	Classification of Precedents - A Hybrid Approach to Indexing and Retrieving Design Cases in SEED (a Software Environment for the Early Phases of Building Design)
doi	https://doi.org/10.52842/conf.caadria.1998.435
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 435-444
summary	An efficient indexing of past solutions is crucial to case-based design (CBD) systems performing complex retrieval on large case-bases. This paper suggests a hybrid approach to the indexing and retrieval of design precedents. The suggested approach accounts for the issues of classification manifested in architectural discussions on type and CBD literature. The indexing scheme integrates description-logic based representation for classification and an object-based representation for precedents. The hybrid scheme constitutes a basis for the implementation of a generic case indexing and retrieval mechanism for SEED.
keywords	Case-Based Design, Classification, Typology
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:54

_id	acadia03_047
id	acadia03_047
authors	Martens, B., Brown, A. and Turk, Z.
year	2003
title	Automated Classification of CAAD-related Publications: Conditions for Setting-Up a Keywording System
doi	https://doi.org/10.52842/conf.acadia.2003.365
source	Connecting >> Crossroads of Digital Discourse [Proceedings of the 2003 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-12-8] Indianapolis (Indiana) 24-27 October 2003, pp. 365-371
summary	This paper deals with the CUMINCAD-repository (Cumulative Index on CAD), which was set up in 1998 and has served the CAAD-community since then as an important source of archived domain related information. CUMINCAD contains over 5,000 entries in the form of publications in the field of Computer Aided Architectural Design. The number has been growing steadily over the years. To date only advanced search mechanisms have been provided to access these works. This may work out well for a just-in-time location of a reference, but is inadequate for just in case browsing through the history of CAAD. For such applications, a hierarchical browsing interface, like one in Yahoo or DMOZ.org is envisioned. This paper describes how the keyword categories were defined and how a moderate, distributed effort in defining the categories will allow machine-identified classification of the entire data set. The aim of the paper is to contribute to building up a wide spread consensus on what the appropriate keyword categories in CAAD are, and what sub-topics should sit below the main keyword categories.
keywords	Web-based Bibliographic Database; Searchable Index; CAAD Research; Classification
series	ACADIA
email
last changed	2022/06/07 07:59

_id	ijac20031205
id	ijac20031205
authors	Martens, Bob; Turk, Ziga
year	2003
title	Cumulative Index of CAAD: Current Status and Future Directions
source	International Journal of Architectural Computing vol. 1 - no. 2
summary	This article discusses the Cumulative Index of CAAD (CUMINCAD.SciX.net) - a digital library set up in 1998 serving the CAAD-community as an important source of scientific information. During the first stage, the metadata of CAAD-related conference proceedings were compiled and published on-line, including all abstracts and approximately 50% of the full-texts. In a subsequent step a Citation Index was created. Currently, theses and dissertations are being added to the library. Furthermore, a hierarchical topic structure was developed for automated classification of publications in the future, with topics being defined by keywords and characteristic papers.The next version of CUMINCAD, expected to be released later this year, will also feature a discussion forum, an event calendar, an option for commenting on and ranking publications as well as creating an on-line personal bibliographic review. CUMINCAD is a unique digital library in the field of CAAD serving a growing user-community. Younger doctoral degree students and junior researchers will benefit most from this edited, structured collection freely available via Internet.
series	journal
email
more	http://www.multi-science.co.uk/ijac.htm
last changed	2007/03/04 07:08

_id	7346
authors	Peyret, F.
year	1998
title	A new facility for testing accurate positioning systems for road construction robotics
source	Automation in Construction 8 (2) (1998) pp. 209-221
summary	The first part of the paper gives a definition of positioning in the context of road work sites and stresses the advantages offered by the new generation of positioning systems. A logical classification of these systems is also proposed. The `global positioning system' (GPS) technique, as one of the most promising techniques, is detailed. The main point of the paper is the presentation of a new test facility for positioning systems which has been set up at the `Laboratoire Central des Ponts et Chaussées' (Central Laboratory of Roads and Bridges). First, its principle is described, based on the re-construction of a 6D reference trajectory to which the measurements of the system in test are compared. Then, the operation of the facility and the post-treatment software which has been specially developed for it are described. Finally, the results of some recent studies are given, results which would have been hard to obtain without using the SESSYL facility. During the first study, the facility was used to establish an accurate time-model of the vertical error and this model allowed us to propose an innovative method for improving the vertical accuracy. During the second study, SESSYL proved its capability of differentiating several state-of-the-art GPS receivers of the same category.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	66c1
authors	Scott, Sam
year	1998
title	Feature Engineering for a Symbolic Approach to Text Classification
source	University of Ottawa Computer Science
summary	Most text classification research to date has used the standard 'bag of words' model for text representation inherited from the word-based indexing techniques used in information retrieval research. There have been a number of past attempts to find better representations, but very few positive results have been found. Most of this previous work, however, has concentrated on retrieval rather than classification tasks, and none has involved symbolic learning algorithms. This thesis investigates a number of feature engineering methods for text classification in the context of a symbolic rule-based learning algorithm. The focus is on changing the standard 'bag of words' representation of text by incorporating some shallow linguistic processing techniques. Several new representations of text are explored in the hopes that they will allow the learner to find points of high information gain that were not present in the original set of words. Representations based on both semantic and syntactic linguistic knowledge are defined and evaluated using the RIPPER rule-learning system. Two major corpora are used for evaluation: a standard, widely-used corpus of news stories, and a new corpus of folk song lyrics. The results of the experiments are mostly negative. Although in some cases the new representations are at least as good as the bag of words, the improvements in quantitative performance that were hoped for do not materialize. However, the results are not entirely discouraging. The syntactically defined representations may enable the learner to produce simpler and more comprehensible hypotheses, and the semantically defined representations do produce some real performance gains on smaller classification tasks that for various reasons fail to scale up to larger tasks. Some ideas are offered as to why the new representations fail to produce better results, and some suggestions are made for continuing the research in future.
series	thesis:MSc
last changed	2003/02/12 22:37

_id	37ae
authors	Tarandi, Väino
year	1998
title	Neutral intelligent CAD communication: information exchange in construction based upon a minimal schema
source	KTH Stockholm
summary	An improved information exchange is frequently proposed as one solution to the inefficiency problems which the construction industry is suffering from today. Such an improvement is very dependent of the use of information technology, IT. To enable an advanced use of IT, there is a need for integrated project communications frameworks and integrated industry wide information. This thesis discusses how product models can be used to improve the information exchange from design to construction. Today there are several approaches to product modelling. Some researchers propose very detailed models whereas others propose generic models with fewer concepts. In this area there is a close connection between research and standardisation, which is carried out by organisations such as the ISO STEP committee and the International Alliance for Interoperability. To get acceptance for a standard proposal, it has to be accepted by both users and standardisation bodies. Thus this research, in addition to the technical requirements on information content and structure, also discusses success factors for standardisation, implementation and usage. In order to define important requirements on a product model for information exchange between design and construction, current research, development and standardisation in the field of product modelling was studied. This thesis advocates a minimal approach in the number of concepts used in a product model, in combination with an external building element classification, following national industry practice. The minimal NICC schema, developed during this research, was tested in a prototype and test study. Three applications were tested: PreFacto (planning tool), Microsoft Project (time scheduling tool) and Calc3(cost estimation tool). From the CAD-system MCAD, NICC files with the building objects were created and transferred into a relational database from which the three applications received their specific input files. The results of the evaluation of the NICC schema and the test study demonstrated that a product model based on few concepts can manage the required information exchange.
keywords	Construction; Product Models; Standardisation; Minimal Models; Requirements; Conceptual Schema
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddss9864
id	ddss9864
authors	Yildirim, Ayca Tuzmen
year	1998
title	Computer Mediated Collaborative Methodologies for Schematic Design Process
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In architectural design practice, a number of design participants are involved in the schematic design process. Participants of the schematic design process perform collaboratively or individually conductedactivities at different stages of the design process. Research conducted on computer mediated architectural design systems suggests a variety of computerized methodologies to support participants in performingcollaborative activities during schematic design process. Most of the suggested methodologies are designed and ready to be implemented in specific platforms, and others are implemented and anticipated to beevaluated against the requirements of specific architectural design domains. However, there is still no single model to date that satisfactorily meets the requirements of collaborating participants duringschematic design process. Prospective users of the currently available models are obliged to choose among a vast variety of group design support solutions with little information about their potentials and pitfalls.This paper focuses on the identification of the fit between collaborating participants’ requirements, prospects of design activities and the currently developed computer mediated design paradigms. In this paper, the author discusses the findings of two different researches conducted in two different professional design domains, and identifies the type of actions prevalent to schematic design process. The author introduces an analysis of a number of computer mediated methodologies that are developed to support participants during schematic design process. As a result of this analysis, this paper introduces a classification of computer-mediated methodologies according to their potential support to tasks and activities performed during the schematic architectural design practice.
series	DDSS
type	normal paper
email
last changed	2008/06/12 21:08

_id	4
authors	Bollinger, Elizabeth and Alvarado, Rodrigo Garcia
year	1998
title	Archetypes as Precedent of Virtual Architectures
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 32-35
summary	Archetypes are psychological concepts described by the renowned Swiss psychologist Cari Jung. It is possible identify archetypal forms in eminent buildings of different regions and ages, recognizing archetypes as a multi-cultural liaison for various architectures. These concepts function as basic precedents of spatial design in different geographical and historical contexts. The emerging digital culture is establishing a plethora of virtual environments, through web-pages of the Internet, global TV, multimedia CD, video games and immersive devices. These virtual environments offer electronic activities and tools for architectural practice. In both senses, virtual architectures conforms to the visual and spatial characteristics of technologies. Thus, electronic capabilities establish digital habitats and references to contemporary architecture. Since virtual architectures are immaterial constructions, perceptual properties guide the spatial and formal design. In that sense, archetypes allow a basic vocabulary for the design of virtual architectures, linking them to cultural history and giving them a human orientation.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	40db
authors	Chambers, Tom and Wood, John B.
year	1998
title	Information Technology in the Building Design Engineering Studio
doi	https://doi.org/10.52842/conf.ecaade.1998.026
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 26-30
summary	This paper reports on the activities of CADET in the design studio environment and in a variety of community contexts with the objective of developing a strategy for teaching design within the context of design, art, architecture and engineering. It begins with an outline of earlier design projects, in a variety of traditional media and in CAAD at several levels within the Undergraduate programme at the University of Strathclyde together with community organisations. It then outlines a model with a number of strands that explore the principles of visual communication which are fundamental to both the development and communication of design ideas. The report will place these activities in the context of developments in education and the wider sphere of cultural heritage, which ultimately inform understanding and knowledge of our architectural and design heritage. It will highlight and explore some important ideas that inform our judgment of aesthetic forms and refer students to relevant texts and precedents in art, design, engineering and architecture.
series	eCAADe
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/29chambers/index.htm
last changed	2022/06/07 07:56

_id	ddss9825
id	ddss9825
authors	Hartog, J. P. den, Koutamanis, A. and Luscuere, P. G.
year	1998
title	Simulation and evaluation of environmental aspects throughout the designprocess
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The evaluation of environmental aspects in architectural design has traditionally been performed by means of simple (and often simplistic) rule systems. These generally remain at the normative level of minimal control one encounters in building rules and regulations, thereby failing to provide sufficient information and clarity for design guidance. Despite this, evaluation results normally bound subsequent design decisions as fundamental, inflexible constraints. At much later design stages, whenarchitectural form has been largely crystallized and when environmental subsystems must be specified in detail, both the architect and the contributing engineers often realize the severe limitation of theinitial choices. A frequently voiced argument for such simplification in the guise of abstraction is the lack of detailed information on the form and functional content of a building in the early stages of the designprocess. This obviously presupposes a tabula rasa generative approach. The application of a priori knowledge in the form of types, cases, precedents and automated recognition permits direct transaction from the abstract to the specific at and between a number of predefined relevant abstraction levels in the representation. The combination of a priori knowledge at the typological level with multilevel representations permits the use of precise simulation techniques already in the early design stages and throughout thedesign process. The simulation results employ the dual representation principle of scientific visualization, thereby linking form with measurable performance. Feedback from the simulation provides the analysis and evaluation means for design guidance and for communication between thearchitect and the contributing engineers. A prerequisite to this is that the abstraction level in the representation constrains the analysis derived from the simulation, e.g., by means of grades of fuzziness applied to different zones in the representation on the basis of information specificity.
series	DDSS
last changed	2003/08/07 16:36

_id	0fbd
authors	Hartog, J.P., Koutamanis, A. and Luscuere, P.G.
year	1998
title	Simulation and evaluation of environmental aspects throughout the design process
source	4th Design and Decision Support Systems in Architecture and Urban Planning Conference. Eindhoven
summary	The evaluation of environmental aspects in architectural design has traditionally been performed by means of simple (and often simplistic) rule systems. These generally remain at the normative level of minimal control one encounters in building rules and regulations, thereby failing to provide sufficient information and clarity for design guidance. Despite this, evaluation results normally bound subsequent design decisions as fundamental, inflexible constraints. At much later design stages, when architectural form has been largely crystallized and when environmental subsystems must be specified in detail, both the architect and the contributing engineers often realize the severe limitation of the initial choices. A frequently voiced argument for such simplification in the guise of abstraction is the lack of detailed information on the form and functional content of a building in the early stages of the design process. This obviously presupposes a tabula rasa generative approach. The application of a priori knowledge in the form of types, cases, precedents and automated recognition permits direct transaction from the abstract to the specific at and between a number of predefined relevant abstraction levels in the representation. The combination of a priori knowledge at the typological level with multilevel representations permits the use of precise simulation techniques already in the early design stages and throughout the design process. The simulation results employ the dual representation principle of scientific visualization, thereby linking form with measurable performance. Feedback from the simulation provides the analysis and evaluation means for design guidance and for communication between the architect and the contributing engineers. A prerequisite to this is that the abstraction level in the representation constrains the analysis derived from the simulation, e.g., by means of grades of fuzziness applied to different zones in the representation on the basis of information specificity.
series	other
email
last changed	2003/04/23 15:50

_id	9bbc
authors	Miranda, V. and Park, T.
year	1998
title	Representation of architectural concepts in the study of precedents: a concept-learning system
source	Automation in Construction 8 (1) (1998) pp. 99-106
summary	Learning architectural concepts through the study of precedents is a common activity in design studio. Traditionally, an instructor presents a design concept by showing selected examples using slides, photographs, drawings, texts and verbal analyses. This method relies on a linear mode of conveying design knowledge and is time bound. It emphasizes information retention and recall of facts rather than an understanding of information. If information on architectural precedents are represented digitally in a system designed to promote understanding of the material rather than just presentation of facts, then some disadvantages of the traditional method may be overcome and additional advantages may be achieved. This paper describes a computer-assisted lesson system designed to represent architectural concepts related to spatial composition in design by using graphic images and text and reports on its development, implementation and testing. The system relies on many characteristics, such as accessibility, interactivity, flexibility, rapid feedback, etc., which are known to foster effective concept learning. The paper also evaluates the viability and effectiveness of this system from a technological and logistical viewpoint as well as from a concept learning viewpoint, and concludes with a discussion on other potential applications.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	e336
authors	Achten, H., Roelen, W., Boekholt, J.-Th., Turksma, A. and Jessurun, J.
year	1999
title	Virtual Reality in the Design Studio: The Eindhoven Perspective
doi	https://doi.org/10.52842/conf.ecaade.1999.169
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 169-177
summary	Since 1991 Virtual Reality has been used in student projects in the Building Information Technology group. It started as an experimental tool to assess the impact of VR technology in design, using the environment of the associated Calibre Institute. The technology was further developed in Calibre to become an important presentation tool for assessing design variants and final design solutions. However, it was only sporadically used in student projects. A major shift occurred in 1997 with a number of student projects in which various computer technologies including VR were used in the whole of the design process. In 1998, the new Design Systems group started a design studio with the explicit aim to integrate VR in the whole design process. The teaching effort was combined with the research program that investigates VR as a design support environment. This has lead to increasing number of innovative student projects. The paper describes the context and history of VR in Eindhoven and presents the current set-UP of the studio. It discusses the impact of the technology on the design process and outlines pedagogical issues in the studio work.
keywords	Virtual Reality, Design Studio, Student Projects
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddss9801
id	ddss9801
authors	Achten, Henri and Leeuwen, Jos van
year	1998
title	A Feature-Based Description Technique for Design Processes: A Case Study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series	DDSS
last changed	2003/11/21 15:15

_id	6672
authors	Af Klercker, Jonas
year	1998
title	A CAVE-Interface in CAAD-Education
doi	https://doi.org/10.52842/conf.ecaade.1998.110
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 110-115
summary	The so called "CAVE-interface" is a very interesting and thrilling development for architects! It supports a better illusion of space by exposing almost a 270° view of a computer model than the 60° which can be viewed on an ordinary computer screen. At the Lund University we have got the possibility to experiment with a CAVE-installation, using it in research and the education of CAAD. The technique and two experiments are discribed. The possibilities are discussed and some problems and questions are put forward.
series	eCAADe
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/31af_klercker/index.htm
last changed	2022/06/07 07:54

_id	6433
authors	Agranovich-Ponomarieva, E. and Litvinova, A.
year	1998
title	The "Real Space - Cyberspace" Paradigm
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 141-145
summary	In a chain of "real - perceived - imagined space" the computer reduces to a uniform model of only real and imagined space. It cannot undertake man's function or it cannot build the perception model. However, perception assumes physiological perception, psychological estimation and understanding, and emotional ho-experience. For a person the seizing of space during perception is constructing temporary spatial images and their development. The communicative relations of the person with environment are established during revealing internal and external structural communications and the interior represents the message, unwrapped in space and perceived in time. The real space is formed under influence of the sum of conceptual restrictions. The character of these restrictions depends on a super idea, a type of an initial situation, character of installations and on social-cultural stereotypes of the author. Without this stage transition to real architectural object is impossible. Result of activity of an architect at this stage becomes creation hypothetical cyberspace, with its own peculiarities and laws.
series	plCAD
last changed	1999/04/08 17:16

_id	de77
authors	Ahmad Rafi, M.E.
year	1998
title	Computer animation for architectural visualisation
source	University of Strathclyde
summary	This thesis critically reviews the state of architectural animation, and relates this specific field to the more general motion-based representations, particularly traditional film-making techniques. It identifies key elements from traditional filmmaking and shows how these elements can improve computer-based architectural animation. The process of identification of the key elements from traditional film-making starts with a critical survey of the use of motion-based representation in local architectural practices and an empirical analysis of several architectural-based documentary films and past and present computer animations. All of the key ideas are illustrated on video by comparing real shooting clips to digital sequences focusing on production and post-production works. Some of these were implemented in two live projects ( Ministry of Finance, Malaysia and Damansara Parade ) for architects to understand the real problems and potentials in each process. These sets of illustrations expand the architect ideas to make full use of the motion-based process to improve the skill of combining architectural information in a good animation. The overall production process becomes more efficient when the motion-based footage is edited using a non-linear editing platform as it enhances the professional appearance as well as vastly saving most of the production time. The thesis concludes with specific recommendations relative to the stage at which the animation is produced. This technology can be best utilised with the right skills (a gained from film-making) and an understanding of each stage that requires a different level of input and gives a certain impact to the viewers.
series	thesis:PhD
email
last changed	2003/11/21 15:15

_id	e78b
authors	Akin, O. and Akin, C.
year	1998
title	On the process of creativity in puzzles, inventions, and designs
source	Automation in Construction 7 (2-3) (1998) pp. 123-138
summary	The most common means of identifying creativity has been through its products. In architecture, music, writing, art, even puzzle solving and scientific discovery, the prerequisite for considering creativity has been the presence of a creative product. Alternatively, anecdotal descriptions have been used to identify processes that are considered creative. Many scientific discoveries have been linked to a sudden realization or unexplainable revelation punctuated with the AHA! response. Outside of the creative product itself and the AHA! response, the kinds of concrete evidence that point to the process of creativity are precious few. Our purpose here is to further examine these phenomena and develop hypotheses about the nature of the creative process. Our ultimate aim is to develop a general theory of creativity. We intend to base this theory on a set of conditions that are necessary for the creative process to take place in a number of domains: puzzles, scientific discoveries, and design, with special emphasis on architectural design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	ddss9802
id	ddss9802
authors	Akin, O., Aygen, Z., Cumming, M., Donia, M., Sen, R. and Zhang, Y.
year	1998
title	Computational Specification of Building Requirements in theEarly Stages of Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	We have been exploring computational techniques to help building designers to specify design requirements during the early stages of design. In the past, little has been accomplished in this area either in terms of innovative computational technologies or the improvement of design performance.The prospect of improving design productivity and creating a seamless process between requirements specification and formal design are our primary motivations. This research has been conducted as partof a larger project entitled SEED (Software Environment to Support Early Phases in Building Design). SEED features an open-ended modular architecture, where each module provides support for a design activity that takes place in early design stages. Each module is supported by a database to store and retrieve information, as well as a user interface to support the interaction with designers. The module described in this paper, SEED-Pro (the architectural programming module of SEED), is a workingprototype for building design requirements specification. It can be used by other modules in SEED or by design systems in other domains, such as mechanical engineering, civil engineering, industrial designand electrical engineering. Our approach to SEED-Pro is divided into two phases: core, and support functionalities. The core functionalities operate in an interactive mode relying on a case-based approach to retrieve and adapt complex specification records to the problem at hand. The supportfunctionalities include the case-base, the data-base, and the standards processing environment for building specification tasks. Our findings indicate that SEED-Pro: (1) is a tool that structures the unstructured domain of design requirements; (2) enables the integration of design requirements with the rest of the design process, (3) leads to the creation of complex case-bases and (4) enables the observation of their performance in the context of real world design problems.
series	DDSS
last changed	2003/11/21 15:15

_id	d35f
authors	Akin, O.
year	1997
title	Researching Descriptive Models of Design
source	Automation in Construction 7 (2-3) (1998) pp. 97-100
summary	This special double issue is a result of the international symposium and workshop on „Descriptive Models of Design“ wich was held during July 1-5, 1996, at Istanbul Technical University, Istanbul, Turkey. The primary goal of the symposium was to promote greater understanding and to develop recommendations for funding policy and practices in the area of descriptive models of design.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

For more results click below: