Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 555

Reformat results as: short short into frame detailed detailed into frame

_id	e031
authors	Stannard, Sandy
year	1998
title	Computers in Design Exploring Light and Time
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 26-35
doi	https://doi.org/10.52842/conf.acadia.1998.026
summary	Computers have helped bring architectural education to a digital crossroads. This new tool is effecting architectural education on numerous levels, from the simplest word processing of research papers to more complex interactive modeling. This casestudy paper will focus on the new and changing role of the computer in the design studio. In this case, the approach to integrating the computer into the studio revolves around its application simply as another tool for a designer’s use. Clearly, the use of computers in design studios is not a new development. However, as the computer’s use in design education is not yet widespread, a dialogue about methods of application is valuable for design educators. The intent behind computer use in this case was not to replace traditional design methods but to complement and enhance them. In this spirit, this case study focuses on the use of computers to investigate two aspects of design that are challenging to model: light and time. In the studios to be examined here, students were required to explore their designs with both traditional tools (sketches on trace, physical study models as well as final finish models, etc.) and with newer digital tools (lighting simulation programs, threedimensional modeling programs, and animation). Students worked in teams in most cases. The computer was used both as a design tool as well as a representational tool, with varying degrees of success, depending on the student’s expertise, comfort using the computer as a design tool and access to appropriate hardware and software. In the first studio case study, the “new” medium of the computer was a perfect complement for the focus of the studio, entitled “Space and Light.” In addition to utilizing large scale physical models traditionally used for lighting design, three-dimensional computer models using Lightscape enriched the design results. Both sets of tools were vital for the design processes of the studio assignments. In the second studio case study, a traditional fourth year studio was required to use the computer to explore the dimension of time in their designs, which in this case translated into animation modeling. Integrating the computer into the design studio promises to be a complex task. As these examples will illustrate, the advantages and the disadvantages require continual balancing. Philosophical disagreement, potential discomfort, or a general lack of knowledge of digital tools may inhibit design educators from testing the potential of these ever-changing tools. Despite the challenges, this case study reveals the educational value of continued experimental use of digital tools in the design studio.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ga9921
id	ga9921
authors	Coates, P.S. and Hazarika, L.
year	1999
title	The use of genetic programming for applications in the field of spatial composition
source	International Conference on Generative Art
summary	Architectural design teaching using computers has been a preoccupation of CECA since 1991. All design tutors provide their students with a set of models and ways to form, and we have explored a set of approaches including cellular automata, genetic programming ,agent based modelling and shape grammars as additional tools with which to explore architectural ( and architectonic) ideas.This paper discusses the use of genetic programming (G.P.) for applications in the field of spatial composition. CECA has been developing the use of Genetic Programming for some time ( see references ) and has covered the evolution of L-Systems production rules( coates 1997, 1999b), and the evolution of generative grammars of form (Coates 1998 1999a). The G.P. was used to generate three-dimensional spatial forms from a set of geometrical structures .The approach uses genetic programming with a Genetic Library (G.Lib) .G.P. provides a way to genetically breed a computer program to solve a problem.G. Lib. enables genetic programming to define potentially useful subroutines dynamically during a run .* Exploring a shape grammar consisting of simple solid primitives and transformations. * Applying a simple fitness function to the solid breeding G.P.* Exploring a shape grammar of composite surface objects. * Developing grammarsfor existing buildings, and creating hybrids. * Exploring the shape grammar of abuilding within a G.P.We will report on new work using a range of different morphologies ( boolean operations, surface operations and grammars of style ) and describe the use of objective functions ( natural selection) and the "eyeball test" ( artificial selection) as ways of controlling and exploring the design spaces thus defined.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	e72f
authors	Dorta, Tomás and LaLande, Philippe
year	1998
title	The Impact of Virtual Reality on the Design Process
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 138-163
doi	https://doi.org/10.52842/conf.acadia.1998.138
summary	Sketching, either hand or computer generated, along with other traditional visualization tools such as perspective drawing have difficulty in correctly representing three dimensional objects. Even physical models, in architecture, suffer in this regard because of inevitable scaling. The designer finds himself cut off from the reality of the object and is prone to misinterpretations of the object and its surrounding space and to resulting design errors. These are sometimes not perceived until too late, once the object has been constructed. Traditional tools use 2D media to represent 3D objects and only manage to introduce the third dimension in a limited manner (perspectives, not only tedious to construct, are static). This scenario affects the design process, particularly the cycle of proposal, verification and correction of design hypotheses as well as the cognitive aspects that condition the designer’s visualization of the designed object. In most cases, computer graphics mimic, through its interface, the traditional way of doing things. The architectural model is parametricized with little regard for visualization. No allowance is made for the change in the medium of graphic representation. Moreover, effort is not made to capitalize on the advantages of numerical calculation to propose new interfaces and new dimensions in object visualization. Virtual Reality (VR), seen not only as technology but as experience, brings the 3D object, abstractly viewed by traditional means, into clearer focus and provides us with these new dimensions. Errors due to abstracted representation are reduced since the interface is always three dimensional and the interactions intuitively made in real time thus allowing the designer to experience the presence of the designed object very quickly. At the École de design industriel of the Faculté d’aménagement, we have run tests using non-immersive VR–one passive (comprehension) and another active (design). This project, involving a group of 72 students during a period of six weeks (6h/week), aimed at analyzing the impact of VR as a visualization tool on the design process versus traditional tools. The results, described in this presentation, shed light on the effect of VR on the creative process as such, as well as on the quality of the results produced by that process.
series	ACADIA
email
last changed	2022/06/07 07:55

_id	41
authors	Peh, Calvin and Noble, Douglas
year	1998
title	The Design of Computer Working and Teaching Environments
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 310-315
summary	It is undeniable that the computer has affected every aspect of our lives. Many people work with computers on a daily basis, from writing e-mail or simply browsing the internet to hours of serious modeling and drafting for those in the architecture field. As we spend more time working with computers, research into improving computer teaching and working environments becomes more important. For those working in an architecture office, it almost certain that a major part of the day will be spent in front of a computer drafting. This research provides a preliminary set of guidelines that can be applied in the design of computer working/teaching environments. The on-going research is focussed in creating facilities geared toward user comfort and productivity and improving teaching environments. It covers issues regarding the position and orientation of the room, lighting aspect (including natural and artificial light), acoustics, user visual comfort, psychrometric conditions, furnishings, and the adaptability of the space for future changes. The project includes analysis of existing examples of computer-lecture rooms, noting the problems and suggesting improvements.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	21
authors	Barroso, Jorge
year	1998
title	Reflexiones Sobre la EnseÒanza de la Arquitectura, la Informatica e Internet (Reflections on the Teaching of the Architecture, Computing and the Internet)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 174-179
summary	This paper proposes a reflection upon the teaching of architecture as seen from the actual practice of the profession within the context of the changes caused by the widespread use of computers and Internet in recent years. This proposal designates the present time as "semic revolution", superseding denominations like post industrial" or information revolution", emphasizing that the "mental prosthesis" created by man represents the highest degree of exploitation of his innerness as a "semic subject". A brief epistemological framework serves to lay the foundation for the concepts of imagination, creation, and design, differentiating the creator by his characteristic of requiring or not, semic mediation in order to reach his goals. The dominant use of new instruments which serve to represent and operate the "primary virtual object" giving priority to the comprehension and function of the new tool over the acquisition of information and ability to use it, is proposed when carried over to the field of application. The integration of internal networks through email strives not only to facilitate document transmission, exercises, group work, etc. but to understand the new dimension in the intellectual activities of man.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	7
authors	Bermudez, Julio
year	1998
title	Interaccion de Medios y Proceso De DiseÒo: Teoria y Base de Conocimientos Para una Produccion Arquitectonica Hibrida (Interaction of Design Media and Process: Theory and Knowledge Base for in the Production of Architectural Hybrids)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 56-65
summary	Integrating computers in architectural design means to negotiate between centuries-old analog design methods and the new digital systems of production. The difficulty lies in the underdeveloped state of the necessary methods, techniques, and theories to relate traditional and new media. Recent investigations on the use of multiple iterations between manual and electronic systems to advance architectural work show promising results. However, these experiments have not yet either developed a theoretical base that connects their procedures to a larger conceptual framework nor been sufficiently cross-referenced and third party tested to conform a reliable knowledge base. This paper addresses the first shortcoming in the light of the forces transforming our contemporary civilization and architecture.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	e3d1
authors	Dodge, Richard
year	1998
title	What a Difference a Tool Makes:The Evolution of a Computer Design Studio
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998
doi	https://doi.org/10.52842/conf.ecaade.1998.x.t4u
summary	What a Difference a Tool Makes : discoveries made during the evolution of the Advanced Design Studio (a.k.a. 'working drawings') at the University of Texas at Austin since the time this core course was switched to computers, when student design teams were provided with computers and required to use them for design and presentation. Covers the period from the course?s inception in 1991 to the present, during which the course has been under the continuing aegis of Professor Richard Dodge, who has taught design since 1967. Contrapuntal presentation by Professor Dodge and co-instructor and former student Marla Smith: what was done, what worked, and what went wrong. Discusses students, faculty, hardware, software, design problems assigned, and the most educational computer-related catastrophes.
series	eCAADe
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/04dodge/index.htm
last changed	2022/06/07 07:50

_id	c3e0
authors	Dorsey, J. and McMillan, L.
year	1998
title	Computer Graphics and Architecture: State of the Art and Outlook for the Future
source	Computer Graphics, Vol 32, No 1, Feb 1998. pp. 45-48
summary	During the three decades since Ivan Sutherland introduced the Sketchpad system, there has been an outpouring of computer graphics systems for use in architecture. In response to this development, most of the major architectural firms around the world have embraced the idea that computer literacy is mandatory for success. We would argue, however, that most of these recent developments have failed to tap the potential of the computer as a design tool. Instead, computers have been relegated largely to the status of drafting instruments, so that the "D" in CAD stands for drafting rather than design. It is important that future architectural design systems consider design as a continuous process rather than an eventual outcome.The advent of computer graphics technology has had an impact on the architectural profession. Computer graphics has revolutionized the drafting process, enabling the rapid entry and modification of designs. In addition, modeling and rendering systems have proven to be invaluable aids in the visualization process, allowing designers to walk through their designs with photorealistic imagery. Computer graphics systems have also demonstrated utility for capturing engineering information, greatly simplifying the analysis and construction of proposed designs. However, it is important to consider that all of these tasks occur near the conclusion of a larger design process. In fact, most of the artistic and intellectual challenges of an architectural design have already been resolved by the time the designer sits down in front of a computer. In seeking insight into the design process, it is generally of little use to revisit the various computer archives and backups. Instead, it is best to explore the reams of sketches and crude balsa models that fill the trash cans of any architectural studio.In architecture, as in most other fields, the initial success of computerization has been in areas where it frees humans from tedious and mundane tasks. This includes the redrawing of floor plans after minor modifications, the generation of largely redundant, yet subtly different engineering drawings and the generation of perspective renderings.We believe that there is a largely untapped potential for computer graphics as a tool in the earlier phases of the design process. In this essay, we argue that computer graphics might play a larger role via applications that aid and amplify the creative process.
series	journal paper
last changed	2003/04/23 15:50

_id	aac0
authors	Garcia, Renato
year	1998
title	Structural Feel or Feelings for Structure? - Stirring Emotions through the Computer Interface in Behaviour Analysis of Building Structures
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 163-171
doi	https://doi.org/10.52842/conf.caadria.1998.163
summary	The use of computers in the analysis of architectural structures has at present become indispensable and fairly routine. Researchers & professionals in architecture and engineering have taken advantage of current computer technology to develop richer and more comprehensive interactive interfaces in systems designed to analyse structural behaviour. This paper discusses a research project which attempts to further enrich such computer interfaces by embodying emotion or mood (affective) components into them and assessing the effects of incorporating these into multimodal learning modules for students of architecture at the University of Hong Kong. Computer structural analysis is most often used to determine the final state of a structure after full loading, but can also be used very ably to depict the time-history behaviour of a structure. The time-dependent nature of this process of behaviour provides an excellent opportunity to incorporate emotion cues for added emphasis and reinforcement. Studying time-history behaviour of structures is a vital part of classroom learning in structures and this why such emotion cues can have significant impact in such an environment. This is in contrast to the confines of professional engineering practices where these cues may not be as useful or desirable because oftentimes intermediate time history data is bypassed as a blackbox and focus is placed primarily on bottomline analysis results. The paper will discuss the fundamental basis for the establishment of emotional cues in this project as well as it's implementation-which consists mainly of two parts. The first involves 'personifying' the structure by putting in place a structure monitoring system analogous to human vital signs. The second involves setting up a 'ladder' of emotion states (which vary from feelings of serenity to those of extreme anxiety) mapped to the various states of a structures stability or condition. The paper will further elaborate on how this is achieved through the use of percussion, musical motifs, and chord progression in resonance with relevant graphical animations. Initially in this project, emotion cues were used to reinforce two structural behaviour tutoring systems developed by this author (3D Catenary Stuctures module & Plastic Behaviour of Semi-rigid Steel Frames module). These modules were ideal for implementing these cues because both depicted nonlinear structural behaviour in a mainly time-history oriented presentation. A brief demonstration of the actual learning modules used in the project study will also be presented together with a discussion of the assessment of it's effectiveness in actual classroom teaching.
keywords	Affective Interfaces, Human-Computer Interaction, Computer-Aided-Engineering
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:50

_id	161c
authors	Juroszek, Steven P.
year	1999
title	Access, Instruction, Application: Towards a Universal Lab
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 141-150
doi	https://doi.org/10.52842/conf.ecaade.1999.141
summary	In January 1998, the Montana State University School of Architecture embarked upon an initiative to successfully integrate computer technology into its design curriculum. At that time only a handful of student computers could be found in the design studio. By January 1999 over 95 students have and use computers in their courses. The increase in computer access and use is occurring through a five-phase initiative called the Universal Lab-a school-wide commitment to the full integration of computer technology into all design studios, support courses and architectural electives. The Universal Lab uses the areas of Access, Instruction and Application as the vehicles for appropriate placement and usage of digital concepts within the curriculum. The three-pronged approach allows each instructor to integrate technology using one, two or all three areas with varying degrees of intensity. This paper presents the current status of the Universal Lab-Phase I and Phase II-and describes the effect of this program on student work, course design and faculty instruction.
keywords	Design, Access, Instruction, Application, Integration
series	eCAADe
email
last changed	2022/06/07 07:52

_id	807b
authors	Kalisperis, Loukas N. and Pehlivanidou-Liakata, Anastasia
year	1998
title	Architectural Design Studio: Digital and Traditional
source	Computers in Design Studio Teaching [EAAE/eCAADe International Workshop Proceedings / ISBN 09523687-7-3] Leuven (Belgium) 13-14 November 1998, pp. 73-81
doi	https://doi.org/10.52842/conf.ecaade.1998.073
summary	The nature of the task of representing architecture alters to reflect the state of architecture at each period of time. In simulating architecture, the necessary conversion from that which is inhabitable, experiential, functional, and at times, indescribable to an abstraction in an entirely different media is often an imperfect procedure that centers on its translation rather than the actual design. The objective in visualizing any architectural design is to achieve a situational awareness that allows for meaningful criticism of the design. Computer-aided three-dimensional (3D) visualization technology has made available new representation techniques. Surpassing the traditional means of graphic illustration and scaled models, this technology has been primarily developed to decrease the amount of abstraction between architecture and its documentation. The general objective of this paper is to present a study carried out over the last six years in which the progress of students in a traditional studio was compared to the progress of similar students in a digital studio. We have assessed the effects of the tools over the six-year period (24 different projects) by evaluating solution-generation in trial-and-error process and learning problem-solving strategies based on the Cognitive Flexibility Theory paradigm. Students using the digital studio were found to generate more and various solutions consistently.
series	eCAADe
email
more	http://www.eaae.be/
last changed	2022/06/07 07:52

_id	6397
authors	Marx, John
year	1998
title	A Proposal for Alternative Methodologies in Teaching Digital Design
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 58-73
doi	https://doi.org/10.52842/conf.acadia.1998.058
summary	Computers have the potential to radically change the process of architectural design, and match more closely the formal aspirations of contemporary designers. What, then, should be the direction educators take in response to the opportunities created by the use of computers in the design process? There are, perhaps, two obvious methods of teaching Digital Design at a university level; a course adjunct to a design studio, or a course offered independently of a design studio. The computer is a facilitator of design ideas, but by itself, is not a creator of content. The primary responsibility of the design studio is the creation of content. It is the implementation of theory and critical analysis which should be the core concern of studio instruction. Given the limited time students are exposed to design studio it would seem appropriate, then, that the digital tools, which facilitate the design process, be taught separately, so as not to dilute the design studios importance. Likewise, this separation should allow the student to concentrate attention on Digital Design as a comprehensive process, beginning with initial massing studies and ending with high resolution presentation drawings. The burden of learning this new process is difficult as well as time consuming. Students are generally struggling to learn how to design, much less to design on the computer. In addition, the current lack of digital skills on the part of design faculty makes it difficult to create a level of consistency in teaching digital design. Compounding these problems is the cost to architectural departments of providing hardware and software resources sufficient to have a computer on every studio desk.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	2
authors	Montagu, Arturo
year	1998
title	Desde La Computacion Grafica a los Sistemas CAD Actuales. Una Vision Historica de la Revolucion Producida en los Sistemas de Representacion Grafica (1966-1998) (From Graphical Computation to Present CAD Systems. An Historical Vision of the Revolution Produced in the Systems of Graphical Representation (1966-1998))
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 14-21
summary	Throughout these pages are made known the persons, the projects and the books that have influenced my actions and that they will be mentioned in form underlined in this paper. I have to emphasize that since 1965 to 1970, and in the continuous search that I was accomplishing to find data and bibliography adapted to the topic of computer graphics, only two series of publications contained topics related to this matter at that time: one was the IBM Journal and the other series was the communications of the ACM. The purpose of this work is to make known an experience accomplished throughout 30 years of intense activity in finding new methods of drawing and design, based on the use of digital computers, mainly in Argentina, and during certain periods of time in Great Britain and since 1971 during short visits to the United States and also in France. The first idea emerged in the year 1965 when I was assistant teacher at the School of Architecture of the University of Buenos Aires, as a combination of ideas between the concepts of spatial geometry and the current morphological studies that we taught in the Course of professor Gaston Breyer. However the idea of automatic drawing emerged observing the operation of the first scientific digital computer installed in the Computing Institute of the Faculty of Sciences of the University of Buenos Aires in 1963 (Sadosky 1963). At the beginning, the approach to the computer were not accomplished from a strictly scientific point of view, but it was implying a kind of "sincresis" (Koheler 1940) it is more than a synthesis, because I was tried to combine ideas that have had its origin in different worlds of thinking, the analogous world and the digital world, and this situation was very difficult to accept at that time.The designing procedures in the decade 1960's was deeply rooted (and still continues) in the architectural design field as a result of a drawing process based in heuristic techniques.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	6f74
authors	Norman, Richard
year	1998
title	Teaching Computation for Design
source	Computers in Design Studio Teaching [EAAE/eCAADe International Workshop Proceedings / ISBN 09523687-7-3] Leuven (Belgium) 13-14 November 1998, pp. 115-122
doi	https://doi.org/10.52842/conf.ecaade.1998.115
summary	Modeling the formal idea has long been problematic in schools. Renaissance tools, however inspired by the invention of perspective, usually result in two-dimensional sketches. Cardboard and small pieces of wood occasionally become the three-dimensional media of first visualization in studios; modeling on the computer is a newer idea. This paper examines two experiments, one where design fundamentals and solid modeling are introduced in a common studio, the other where instruction is removed from the studio environment and made an adjunct elective. In the first case the course is an introduction to both design and computation, an electronic investigation of Paul Klee’s first principles: point, line, shape, form and space—adding, subtracting, rotating and multiplying objects using Beaux Arts principles to create the design. The result is architectural form-making that was not possible in the studio-past. The second case is a course which isolates computer instruction from the studio, making it a separate academic discipline. Fantasy projects then demonstrate computational principle, exploring pure form without burden of technical or social obligation that studio imposes; alternative methods are presented for introducing design computation to the architectural student.
series	eCAADe
email
more	http://www.eaae.be/
last changed	2022/06/07 07:58

_id	1c8e
authors	Schmitt, Gerhard
year	1998
title	Shared Authorship in Design - Phase (X) and Multiplying time
source	Computers in Design Studio Teaching [EAAE/eCAADe International Workshop Proceedings / ISBN 09523687-7-3] Leuven (Belgium) 13-14 November 1998, pp. 15-30
doi	https://doi.org/10.52842/conf.ecaade.1998.015
summary	Information Technology allows us to conquer space, time and.. architecture. Information is increasingly tangible, so far as to become an architectural building material itself. Design is no longer restricted to the invention and construction of physical artifacts, it includes virtual worlds, mixed physical and virtual environments, interfaces between the real and the virtual. Design is no longer the responsibility of one single author, although single authorship has always been more of an ideal or a wish rather than a reality. We are now moving towards an increased awareness and acceptance of shared authorship - this is also true outside the field of architecture.
series	eCAADe
email
more	http://www.eaae.be/
last changed	2022/06/07 07:57

_id	451d
authors	Strong, James and Woodbury, Robert F.
year	1998
title	Psyberdesign: Designing the Cognitive Spaces of Virtual Environments
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 276-288
doi	https://doi.org/10.52842/conf.acadia.1998.276
summary	Increasingly, we find ourselves spending more time on a daily basis engaged in a variety of virtual environments, ranging from those discovered when using the stand-alone computer, to more complex distributed networks such as the World Wide Web. Virtual environments are not restricted to the popular and hyped notion of immersive Virtual Reality systems, though, in immersion, such systems provide a dimension of experience sorely lacking in most human-computer interfaces. The design of a diverse range of virtual environments, from textual through to three dimensional, would seem to require insight from those who habitually create immersive experiences, whether real or virtual. The former include architects, the latter the authors of computer games. Virtual environments such as the Internet, and the World Wide Web in particular, are becoming increasingly confusing to navigate. Exploratory behaviour in these environments requires extensive cognitive effort, and often results in disorientation and a sense of anxiety. This paper attempts to address issues of cognitive mapping in virtual environment design, and the exciting role that architects should occupy in the creation of better virtual environments. A virtual environment tool, called WOMBAT, has been developed to discover more about the relationship between real environment and virtual environment navigation and cognitive mapping, and consequently the degree to which concepts and theories from real environment design and cognitive mapping research can be translated to the virtual environment domain. Both a natural environment and an information environment are being investigated using WOMBAT, with the primary interest being the cognitive mapping and wayfinding activities that are exhibited during exploration.
series	ACADIA
email
last changed	2022/06/07 07:56

_id	a545
authors	Wood, John B. and Chambers, Tom
year	1998
title	Value Added Learning: The Cadet Experience
source	Computers in Design Studio Teaching [EAAE/eCAADe International Workshop Proceedings / ISBN 09523687-7-3] Leuven (Belgium) 13-14 November 1998, pp. 165-172
doi	https://doi.org/10.52842/conf.ecaade.1998.165
summary	This paper reports on the integration of Information Technology in the Building Design Engineering Studio. It is based on the work carried out by the CADET Unit (CAD Education and Training), which promotes a better understanding of the built environment through an integrated approach to design studio teaching. This is achieved through a dynamic studio environment guided by a Building Design Engineering ethos that adopts a holistic approach to design; recognising that design in engineering, architecture and the visual arts demands an understanding of the challenges of a multidisciplinary approach that acknowledges a broader cultural dimension. There are increasing demands placed on students of architecture and engineering. They require skills in making physical as well as computer models, they must be able to draw in 18th & 19th century conventional media (paper, pen and pencil) as well as CAD and they must be proficient in rendering in full colour both conventionally and in the electronic media including animations. The creative use of the computer at the point of analysis and conceptualisation, as important as technical proficiency, is a necessary part of the design process. In recognition of the demands that we currently make of university students we are exploring two critical responses. In the first case we demonstrate an integrated approach to design studio practice, achieving a value added learning experience in the University Sector, and with a view to the longer term we are exploring the application of a similar design approach within the Secondary School Sector in order to raise the awareness of design at an earlier stage.
series	eCAADe
email
more	http://www.eaae.be/
last changed	2022/06/07 07:57

_id	ddss9816
id	ddss9816
authors	Demirel, Füsun
year	1998
title	A Research on Housing in Ankara-Turkey
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The subject of this research contains an opinionnaire study and its results obtained from 30 houses in Ankara-TURKEY in which the people have middle and upper middle income so as to identify their favourites and criticsm about housing, regarding to their both houses and environment as well as tomake the definition of ideal houses and environment. Totally 30 subjects of which 21 are female and 9 are male which represent middle and upper middle incomed people. The average age of the subjects whose age range vary between 21 and 70 is 41. In the study, firstly, the opinionnaire questions were prepared and the housing in which the middle and upper middle incomed people live were determined as socio-economic level to be examined. Next permission and time reservation were requested fromthe owner's of housing to implement the study. During the times which have been determined by the subjects, the following procedure has been followed reading of the opinionnaire forms by myself and recording of responses of the subjects exactly, drawing of reliefs and plans of house, taking pictures of outer views and surroundings of housings. Tendencies of users' against various conditions have been transformed into numerical values from 1 to 7 in a scale with 7 column. In the light of above information; Considering the country conditions it was observed that these housing were excessivelylarge and were built for ostentation purposes, not for functional purposes. Usefulness, that is to say, design of house is in the bottom of the criteria list and it is not an important factor to choose the house, form another part of interesting findings of this study. Another significant result has been observed due to users desire about their house. Although the rising of design which was in 6th rank among the reasons to prefer a house was not an effective criteria on users' attitudes merely to have ahouse, this criteria was the 1st rank (87 %) among reasons due to the advantages that were provided for the users with respected to design and functionality as a result of meticulous studies of architects.Users' criticisms on their vicinity have shown variations according to their sexes.As a result of this research that were initiated to define the ideal house and environment concepts; interesting and detailed data about users' tendencies in the scope of both house and settling are available in "Findings" part of this study. Rising of desing criteria which was the 6 th rank amongcriteria's to choose a house, to 1st rank has brought the following conclusion: since the users are not able to act consciously due to the consideration of the properly owing action much more important,the main duty here is performed by the planner. Hence, starting from the assumption that users living in housings are extremely sensitive to their houses and especially environments, provision of public participation via this kind of opinionnaire studies while creating new environments, may contribute to create such environments in which people can live.
series	DDSS
last changed	2003/08/07 16:36

_id	caadria2006_569
id	caadria2006_569
authors	WEI-TSANG CHANG, TENG-WEN CHANG
year	2006
title	FOLDING SPACE WITH TIME-BASED OPERATIONS
source	CAADRIA 2006 [Proceedings of the 11th International Conference on Computer Aided Architectural Design Research in Asia] Kumamoto (Japan) March 30th - April 2nd 2006, 569-571
doi	https://doi.org/10.52842/conf.caadria.2006.x.j6m
summary	Folding is not only a design operation of shaping but also a philosophy theory from Deleuze (Deleuze 1988) which was adopted by architecture. Basically, folding constitutes to forming and topology, which often delivered a mathematical and philosophical expression in generating 3D architectural form. For instance, the work of Eisenman (Eisenman 2003), Libeskind and Lynn (Lynn 1998), they use folding as inspiration to explore the textural folding and bifurcation meaning in the process of form-making. While exploring the meaning of folding, their ideas are expressed by the form using computational tools. Therefore, if a suitable or inspirable tool like our Folding Space (FoS) could be available, such action –fold can be expressed further in the form exploration process.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	438c
authors	Asanowicz, Aleksander and Jakimowicz, Adam (Eds.)
year	1998
title	Cyber-Real Design
source	5th International Conference on Computers in Architectural Design / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, 262 p.
series	plCAD
email
last changed	2003/05/17 10:01

For more results click below: