Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 546

Reformat results as: short short into frame detailed detailed into frame

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	2539
authors	Neuckermans, H., De Ridder, T. and Geebelen, B.
year	1998
title	Speech-Driven Computer-Aided Design - Innovation in Human-Computer Interaction
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 309-316
doi	https://doi.org/10.52842/conf.caadria.1998.309
summary	The use of computers in architectural design has shifted from what initially was a very numerical approach into a graphical way and thus into a designerly way of working. Through the extensive use of WIMPs CAAD packages today are more or less user-friendly. In the meantime the ever increasing functionality of those packages inflate the number of commands, actions, options and choices which have to be activated with the mouse in order to generate a structured drawing. As a result packages become rather cumbersome to handle. In this research we have explored a new medium, namely speech, to tell the machine what to do. With software for speech recognition and making use of a head-mounted microphone we have built a far more user-friendly way of handling a CAD package. Grids, snap, ortho, layers, settings and other commands that can be used in combination with mouse actions are activated and deactivated by voice command. We are convinced that this is a step further towards a more easy and natural way of using computers while designing and certainly a way for speeding up the modeling of real architecture. The experiment has been conducted for AutoCAD with the software for speech recognition by Lernout & Hauspie. This new way of working is not limited to architecture and the principle can be used right now for any other package, provided it has a programming interface.
keywords	Electronic Design Media, Human-Computer Interaction, Design
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:58

_id	aaa9
authors	Shneiderman, Ben
year	1998
title	Designing the User Interface (3rd Ed.)
source	Addison Wesley, 650 p. [ISBN: 0201694972 ]
summary	Designing the User Interface is intended primarily for designers, managers, and evaluators of interactive systems. It presents a broad survey of designing, implementing, managing, maintaining, training, and refining the user interface of interactive systems. The book's second audience is researchers in human-computer interaction, specifically those who are interested in human performance with interactive systems. These researchers may have backgrounds in computer science, psychology, information systems, library science, business, education, human factors, ergonomics, or industrial engineering; all share a desire to understand the complex interaction of people with machines. Students in these fields also will benefit from the contents of this book. It is my hope that this book will stimulate the introduction of courses on user-interface design in all these and other disciplines. Finally, serious users of interactive systems will find that the book gives them a more thorough understanding of the design questions for user interfaces. My goals are to encourage greater attention to the user interface and to help develop a rigorous science of user-interface design.
series	other
email
more	http://www.awl.com/dtui/
last changed	2003/04/02 08:00

_id	bb72
authors	Bourdot, P., Krus, M., Gherbi, R.
year	1998
title	Cooperation Between Reactive 3D Objects and a Multimodal X Window Kernel for CAD
source	Bunt, H., Beun, R.J., Borghuis, T. (Eds.). Multimodal Human-Computer Communication : Systems, Techniques, and Experiments. Berlin : Springer
summary	From the early steps of sketching to final engineering, a frequent and very important activity in designing objects is to perform graphical and spatial simulations to solve the constraints on the objects which are being designed. But when we analyse work situations involving the use of CAD systems, it is today an acknowledged fact that these tools are not helpful to perform these types of simulations. While knowledge modeling based on form feature concepts already offers some possibilities for attaching behaviour to objects, the simulation activity requires in addition a `real time' and `intelligent' management of the interactions between the 3D virtual objects and the CAD user. Our general purpose is to study how future CAD systems could be improved to achieve the simulation steps of object design. In this context we present some issues concerning the cooperation between a model of reactive 3D objects and a multimodal X Window kernel. We have developed a prototype of a system where objects with reactive behaviour can be built, and with which the user can interact with a combination of graphical actions and vocal commands. This prototype is used to evaluate the feasability and the usefulness of the integration of such techniques in futur applications that would be used by object designers in a real working context. We describe the current state of this system and the planned improvements.
series	other
last changed	2003/11/21 15:16

_id	fb22
authors	Chien, Sheng-Fen
year	1998
title	Supporting information navigation in generative design systems
source	Camegie Mellon University, School of Architecture
summary	Generative design systems make it easier for designers to generate and explore design altematives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed to enable designers to access the information with ease. Such aids may improve the usability of generative design systems and encourage their use in architectural practice. This dissertation presents a comprehensive approach to support navigation in generative design systems. This approach takes account of studies related to human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. It contains a general model of design space, basic navigation operations, and principles for designing navigation support. The design space model describes how the space may grow and evolve along predictable dimensions. The basic operations facilitate navigation activities in this multi-dimensional design space. The design principles aim at guiding system developers in creating navigation utilities tailored to the needs of individual design systems. This approach is validated through prototype implementations and limited pilot usability studies. The validity of the design space model and basic navigation operations is examined through the development of a design space navigation framework that encapsulates the model and operations in a software environment and provides the infrastructure and mechanisms for supporting navigation. Three prototype navigation tools are implemented using this framework. These tools are subjected to usability studies. The studies show that these tools are easy to leam and are efficient in assisting designers locating desired information. In summary, it can be demonstrated that through the prototype implementations and usability studies, this approach offers sufficient support for the design and implementation of navigation aids in a generative design system. The research effort is a pioneer study on navigation support in generative design systems. It demonstrates why navigation support is necessary; how to provide the support; and what types of user interaction it can offer. This research contributes to information navigation studies not only in the specific domain of generative design system research, but also in the general field of human-computer interaction.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	cfad
authors	Kurmann, David
year	1998
title	Sculptor - How to Design Space?
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 317-326
doi	https://doi.org/10.52842/conf.caadria.1998.317
summary	Architects face a significant lack of computer tools that truly support them in the early, conceptual stages of design. In this paper, we take a look at the reasons for that and propose some solutions. We introduce new human-machine interaction methods that do differ from construction based approaches. We define new spatial interface paradigms as well as new objects and their behavior. Finally we present their implementation in ‘Sculptor’ - a modeling prototype to enable designing in space with space.
keywords	Spatial Modeling, Human Computer Interface, Cooperative Design
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:52

_id	b796
authors	Krishnamurthy, B.K., Tserng, H.-P., Schmitt, R.L., Russell, J.S., Bahia, H.U. and Hanna, A.S.
year	1998
title	AutoPave: towards an automated paving system for asphalt pavement compaction operations
source	Automation in Construction 8 (2) (1998) pp. 165-180
summary	Asphalt pavement density from roller compaction is a crucial factor in ensuring satisfactory pavement performance. Proper and uniform compaction of the pavement mat is essential in achieving the desired final compacted density. There is a necessity to investigate existing pavement construction practices, and provide more cost-effective modifications to the current scenario. Automation of the paving operation can increase the efficiency and quality of the operation, lead to reductions in overall project costs and time, and enhance pavement life. A system can be developed through algorithmic planning and real-time guidance strategies, and the development of a semi-automated path-planning and real-time guidance system that aims towards automating the paving operation. This system accepts relevant paving project inputs, generates appropriate path plans for the compactor, performs a graphical visualization of the generated path plan, and offers real-time guidance capabilities using Global Positioning Systems (GPS) technology. This system, named AUTOPAVE (v1.0), was developed in Microsoft Visual Basic™ programming language and offers a user-friendly and interactive graphical interface. The proposed new system will incorporate state-of-the-art GPS technology to standardize paving operations that are more amenable to rigorous quality control, and can result in considerable reductions in cost and time involved in asphalt pavement construction projects. This system was tested on several actual paving projects, and many operational issues related to the functioning of the system were successfully overcome.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	avocaad_2001_16
id	avocaad_2001_16
authors	Yu-Ying Chang, Yu-Tung Liu, Chien-Hui Wong
year	2001
title	Some Phenomena of Spatial Characteristics of Cyberspace
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	"Space," which has long been an important concept in architecture (Bloomer & Moore, 1977; Mitchell, 1995, 1999), has attracted interest of researchers from various academic disciplines in recent years (Agnew, 1993; Benko & Strohmayer, 1996; Chang, 1999; Foucault, 1982; Gould, 1998). Researchers from disciplines such as anthropology, geography, sociology, philosophy, and linguistics regard it as the basis of the discussion of various theories in social sciences and humanities (Chen, 1999). On the other hand, since the invention of Internet, Internet users have been experiencing a new and magic "world." According to the definitions in traditional architecture theories, "space" is generated whenever people define a finite void by some physical elements (Zevi, 1985). However, although Internet is a virtual, immense, invisible and intangible world, navigating in it, we can still sense the very presence of ourselves and others in a wonderland. This sense could be testified by our naming of Internet as Cyberspace -- an exotic kind of space. Therefore, as people nowadays rely more and more on the Internet in their daily life, and as more and more architectural scholars and designers begin to invest their efforts in the design of virtual places online (e.g., Maher, 1999; Li & Maher, 2000), we cannot help but ask whether there are indeed sensible spaces in Internet. And if yes, these spaces exist in terms of what forms and created by what ways?To join the current interdisciplinary discussion on the issue of space, and to obtain new definition as well as insightful understanding of "space", this study explores the spatial phenomena in Internet. We hope that our findings would ultimately be also useful for contemporary architectural designers and scholars in their designs in the real world.As a preliminary exploration, the main objective of this study is to discover the elements involved in the creation/construction of Internet spaces and to examine the relationship between human participants and Internet spaces. In addition, this study also attempts to investigate whether participants from different academic disciplines define or experience Internet spaces in different ways, and to find what spatial elements of Internet they emphasize the most.In order to achieve a more comprehensive understanding of the spatial phenomena in Internet and to overcome the subjectivity of the members of the research team, the research design of this study was divided into two stages. At the first stage, we conducted literature review to study existing theories of space (which are based on observations and investigations of the physical world). At the second stage of this study, we recruited 8 Internet regular users to approach this topic from different point of views, and to see whether people with different academic training would define and experience Internet spaces differently.The results of this study reveal that the relationship between human participants and Internet spaces is different from that between human participants and physical spaces. In the physical world, physical elements of space must be established first; it then begins to be regarded as a place after interaction between/among human participants or interaction between human participants and the physical environment. In contrast, in Internet, a sense of place is first created through human interactions (or activities), Internet participants then begin to sense the existence of a space. Therefore, it seems that, among the many spatial elements of Internet we found, "interaction/reciprocity" Ñ either between/among human participants or between human participants and the computer interface Ð seems to be the most crucial element.In addition, another interesting result of this study is that verbal (linguistic) elements could provoke a sense of space in a degree higher than 2D visual representation and no less than 3D visual simulations. Nevertheless, verbal and 3D visual elements seem to work in different ways in terms of cognitive behaviors: Verbal elements provoke visual imagery and other sensory perceptions by "imagining" and then excite personal experiences of space; visual elements, on the other hand, provoke and excite visual experiences of space directly by "mapping".Finally, it was found that participants with different academic training did experience and define space differently. For example, when experiencing and analyzing Internet spaces, architecture designers, the creators of the physical world, emphasize the design of circulation and orientation, while participants with linguistics training focus more on subtle language usage. Visual designers tend to analyze the graphical elements of virtual spaces based on traditional painting theories; industrial designers, on the other hand, tend to treat these spaces as industrial products, emphasizing concept of user-center and the control of the computer interface.The findings of this study seem to add new information to our understanding of virtual space. It would be interesting for future studies to investigate how this information influences architectural designers in their real-world practices in this digital age. In addition, to obtain a fuller picture of Internet space, further research is needed to study the same issue by examining more Internet participants who have no formal linguistics and graphical training.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	de62
authors	Eriksson, Joakim
year	1998
title	Planning of Environments for People with Physical Disabilities Using Computer Aided Design
source	Lund Institute of Technology, School of Architecture
summary	In the area of environment adaptations for people with physical disabilities, it is of vital importance that the design is optimized considering the human-environment interactions. All involved persons in such a planning process must be given sufficient support in understanding the information, so that everyone can participate actively. There is an apparent risk that discussions will be kept between experts, due to difficulties in understanding the complex and technical adaptation issues. This thesis investigates the use of computer-based tools for planning/designing environments for physically disabled people. A software prototype, and a method to use such a tool in the planning process, was developed and evaluated, based on the findings from six case studies of real planning situations. The case studies indicated that although such a tool would support the design, as well as the dialog between the participants, a certain level of technical and economical efficiency must be obtained. To facilitate the professional planner's work, an important issue is to maintain a large library of 3D objects. With the latest prototype implementation, it was found that such a planning tool can be produced, even when using consumer-oriented computers. One previous critical factor, interactive manipulation of 3D objects, can now be achieved if utilizing modern graphic cards with 3D acceleration. A usability test was performed to evaluate the prototype's basic operations, involving two groups of future users: five occupational therapist students, and four persons with major physical impairments. It was found that although the usability was satisfactory for the basic tasks, several items needed to be improved or added in future versions. It is important with an integrated support for manikins, in order to evaluate, e.g., wheelchair accessibility, reach ability, positioning of handrails, etc. This thesis reviews and compiles published anthropometrical and biomechanical data into a uniform segment-by-segment structure, in order to aid the design and modifications of manikins. The compilation was implemented as a spreadsheet document. An MRI investigation of the neck-shoulder region was performed on 20 healthy Scandinavian, female volunteers, measuring various musculoskeletal properties. These measurements can be used for further refinements of manikin specifications and biomechanical models.
keywords	Rehabilitation; Disability; Adaptation; Participatory Planning; Design Tool; 3D Graphics; Computer Aided Design; Virtual Reality; Manikin; Anthropometry; Biomechanics; Magnetic Resonance Imaging; Cervical Spine Kinematics
series	thesis:PhD
email
more	http://www.lub.lu.se/cgi-bin/show_diss.pl?db=global&fname=tec_250.html
last changed	2003/02/26 09:21

_id	280e
authors	Park, Taeyeol and Miranda, Valerian
year	1998
title	Development of a Computer-Assisted Instruction System for Information Communication in Design Studio
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 47-56
doi	https://doi.org/10.52842/conf.caadria.1998.047
summary	Design studio is the core of architectural education. An essential part of designing is using information and knowledge obtained from non-studio courses. However, as the complexity of buildings increases, the amount of this information increases and there is a danger that essential design information may be ruined and overlooked because of time and place constraints. As a means to bridge the gap between non-studio courses and design studios, some architectural educators suggest that design studios should bring knowledge to students in the process of designing so that they can apply this knowledge to their design. Most architectural studios, however, do not do enough to bring knowledge systematically into design projects when appropriate. Design projects generate need for additional knowledge about a number of topics, but too few studios systematically make knowledge available. Design studios should consider ways in which knowledge for design projects is integrally made available at the appropriate time. This paper describes a model for the delivery of design studio information which can be integral with any design projects. The model is demonstrated by a computer-assisted instruction (CAI) system designed and placed on the Web to introduce basic structural concepts and to teach an in-depth concept of spatial composition in a design studio and reports on its development, implementation, and testing. The system relies on many issues, such as access to relevant information, links between lessons for different subjects, representation of various design concepts, effective instructional methods for learning concepts, etc., which might be critical elements of designing an information communication system for design studio instruction. This paper tests the effectiveness of the system based on the results from responses of design studio students and observations of the researcher and the studio instructor, and concludes with the information that we hope will be useful in developing CAI materials for reflecting and acquiring information on a number of different subjects that have relevance to architectural design.
keywords	Computer-assisted Instruction (CAI), Design Studio Teaching, Information Delivery System
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:59

_id	0471
authors	Bruton, B.
year	1998
title	Grammars and Pedagogy - Towards new Media Art and Design Education Strategies
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 385-394
doi	https://doi.org/10.52842/conf.caadria.1998.385
summary	The impact of computational grammatical design on pedagogy has received little attention in art education due to the dominant modes of traditional approaches to art and design education. This paper explores the pedagogical implications of grammatical strategies using computers for judgements of design within an art educational setting. Grammatical strategies are studied for their effect on the judgements of novice artists in a new media educational context. It is argued that concepts of grammar and views of contingency are used in a variety of senses in the conception and form making of artists; that finding methods for discussing and utilising complex visual information is aided by grammatical formalisation; that these strategies are evidently effective at both early and mature stages of the realisation of a project. The research explores the relation between computer and art on three levels in which grammar is used: as a sense of grammar, as a computational paradigm and as a description of a kind of computer program. Grammatical formalism is apparent in two dimensional linear and non-linear animations using Photoshop, Premiere and Director, and in solid modelling programs such as Extreme 3D, Form Z, Strata Studio Pro, 3D Studio Max and SoftImage. Web site construction also impacts on the judgements of 2D and 3D design. Computational grammatical programs generate forms that reflect alternative understandings of art and design. Art practise is defined in terms of developing consistent and appropriate design language for the contingency at hand. Form making using grammatical tools, both recursive and array types, is discussed in terms of their applicability and educative value. Reference is made to formal qualities for critique and strategic capability of alternative pedagogy for generation of forms. Examples provided show how simple rule sets develop into complex derivational sequences that challenge traditional strategies for computer imaging. The paper demonstrates the value of a sense of grammars for novice art and design practitioners by using first hand examples of experimental work at the South Australian School of Art, University of South Australia. For novice artists and designers, grammars in conjunction with reflective practice is offered as a useful mind set that supports an interest in actively defining a new kind of art. Illustrations provided show the utility of a contingent sense of grammar for pedagogy and highlights the significant role of grammar in pedagogy.
keywords	Grammar, Pedagogy, Computer, Art, Design
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:54

_id	05d5
authors	Corrao, R. and Fulantelli, G.
year	1998
title	Cognitive accessibility to information on the Web: insights from a system for teaching and learning Architecture through the Net
source	AA VV, Towards an Accesible Web, Proceedings of the IV ERCIM Workshop “User Interfaces for All”, Långholmen-Stockholm
summary	The question of accessibility to the Web takes on a special meaning in educational settings where access to information requires cognitive elaboration of the page contents. It is, therefore, a matter of "cognitive access" to the Web. The main efforts of the designers of Web Based Instruction (WBI) environments to encourage cognitive access are usually aimed at the organisation and presentation of Web documents and at specific cues which can improve the user's interaction, orientation and navigation through the pages. However, it is possible to improve this high-level access to the information by supporting study activities through specific "Working tools" which can be implemented in the Web environment. In this paper we report on the design solutions we have adopted to provide cognitive access to a WBI environment for university students studying Architecture and Town Planning. In particular, we introduce "Working tools" that can be used to support flexible and effective study activities. The adopted design solutions provide different classes of users (not only students) with different access facilities. Finally, it should be noted that the methodologies of the design of WBI systems should deal with this kind of high level access and support it through specific solutions at interface and implementation levels.
series	other
last changed	2003/04/23 15:50

_id	8b9d
authors	Corrao, R. and Fulantelli, G.
year	1998
title	Cognitive Accessibility to Information on the Web: Insights from a System for Teaching and Learning Architecture through the Net ShortPapers: Design Methodology for Universal Access
source	Proceedings of the 4th ERCIM Workshop on "User Interfaces forAll" 1998 n.14 p.6 ERCIM
summary	The question of accessibility to the Web takes on a special meaning in educational settings where access to information requires cognitive elaboration of the page contents. It is, therefore, a matter of "cognitive access" to the Web. The main efforts of the designers of Web Based Instruction (WBI) environments to encourage cognitive access are usually aimed at the organisation and presentation of Web documents and at specific cues which can improve the user's interaction, orientation and navigation through the pages. However, it is possible to improve this high-level access to the information by supporting study activities through specific "Working tools" which can be implemented in the Web environment. In this paper we report on the design solutions we have adopted to provide cognitive access to a WBI environment for university students studying Architecture and Town Planning. In particular, we introduce "Working tools" that can be used to support flexible and effective study activities. The adopted design solutions provide different classes of users (not only students) with different access facilities. Finally, it should be noted that the methodologies of the design of WBI systems should deal with this kind of high level access and support it through specific solutions at interface and implementation levels.
series	other
last changed	2002/07/07 16:01

_id	64c9
authors	Dannettel, Mark E. and Bertin, Vito
year	1998
title	Integrating Electronic Media into the Architecture Studio -A Teaching Development Grant at the Chinese University of Hong Kong.
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 31-38
doi	https://doi.org/10.52842/conf.caadria.1998.031
summary	Increasingly, architecture students and instructors are exposed to a widening array of softwares, hardwares, and strategies for the production and representation of architectural work. In an effort to promote the effective use of these tools within design education, instructors need to develop strategies for implementing them into the design studios. A teaching development grant which has been received by the Department of Architecture at CUHK is entitled Integrated Media Design Studio. This investigation involves multiple instructors, and levels of design studios. It provides an environment of a wide range of available equipment for producing, evaluating, documenting, and communicating architectural work in the studio. In addition to increasing the effective use of technology resources, and also raising the quality of studio instruction, this teaching development grant aims to create opportunities to further integrate other courses within the studio environment.
keywords	Multimedia, Architecture, Studio, Education
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:55

_id	aac0
authors	Garcia, Renato
year	1998
title	Structural Feel or Feelings for Structure? - Stirring Emotions through the Computer Interface in Behaviour Analysis of Building Structures
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 163-171
doi	https://doi.org/10.52842/conf.caadria.1998.163
summary	The use of computers in the analysis of architectural structures has at present become indispensable and fairly routine. Researchers & professionals in architecture and engineering have taken advantage of current computer technology to develop richer and more comprehensive interactive interfaces in systems designed to analyse structural behaviour. This paper discusses a research project which attempts to further enrich such computer interfaces by embodying emotion or mood (affective) components into them and assessing the effects of incorporating these into multimodal learning modules for students of architecture at the University of Hong Kong. Computer structural analysis is most often used to determine the final state of a structure after full loading, but can also be used very ably to depict the time-history behaviour of a structure. The time-dependent nature of this process of behaviour provides an excellent opportunity to incorporate emotion cues for added emphasis and reinforcement. Studying time-history behaviour of structures is a vital part of classroom learning in structures and this why such emotion cues can have significant impact in such an environment. This is in contrast to the confines of professional engineering practices where these cues may not be as useful or desirable because oftentimes intermediate time history data is bypassed as a blackbox and focus is placed primarily on bottomline analysis results. The paper will discuss the fundamental basis for the establishment of emotional cues in this project as well as it's implementation-which consists mainly of two parts. The first involves 'personifying' the structure by putting in place a structure monitoring system analogous to human vital signs. The second involves setting up a 'ladder' of emotion states (which vary from feelings of serenity to those of extreme anxiety) mapped to the various states of a structures stability or condition. The paper will further elaborate on how this is achieved through the use of percussion, musical motifs, and chord progression in resonance with relevant graphical animations. Initially in this project, emotion cues were used to reinforce two structural behaviour tutoring systems developed by this author (3D Catenary Stuctures module & Plastic Behaviour of Semi-rigid Steel Frames module). These modules were ideal for implementing these cues because both depicted nonlinear structural behaviour in a mainly time-history oriented presentation. A brief demonstration of the actual learning modules used in the project study will also be presented together with a discussion of the assessment of it's effectiveness in actual classroom teaching.
keywords	Affective Interfaces, Human-Computer Interaction, Computer-Aided-Engineering
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:50

_id	4942
authors	Gardner, Brian M.
year	1998
title	The Grid Sketcher: An AutoCAD Based Tool for Conceptual Design Processes
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 222-237
doi	https://doi.org/10.52842/conf.acadia.1998.222
summary	Sketching with pencil and paper is reminiscent of the varied, rich, and loosely defined formal processes associated with conceptual design. Architects actively engage such creative paradigms in their exploration and development of conceptual design solutions. The Grid Sketcher, as a conceptual sketching tool, presents one possible computer implementation for enhancing and supporting these processes. It effectively demonstrates the facility with which current technology and the computing environment can enhance and simulate sketching intents and expectations. One pervasive and troubling undercurrent, however, is the conceptual barrier between the variable processes of human thought and those indigenous to computing. Typically with respect to design, the position taken is that the two are virtually void of any fundamental commonality. A designer’s thoughts are intuitive, at times irrational, and rarely follow consistently identifiable patterns. Conversely, computing requires predictability in just these endeavors. Computing is strictly an algorithmic process while thought is not always so predictable. Given these dichotomous relationships, the computing environment, as commonly defined, cannot reasonably expect to mimic the typically human domain of creative design. In this context, this thesis accentuates the computer’s role as a form generator as opposed to a form evaluator. The computer, under the influence of certain contextual parameters can, however, provide the designer with a rich and elegant set of forms that respond through algorithmics to the designer’s creative intents. The software presented in this thesis is written in AutoLISP and exploits AutoCAD’s capacious 3D environment. Designs and productions respond to a bounded framework where user selected parametric variables of size, scale, proportion, and proximity, all which reflect contextual issues, determine the characteristics of a unit form. Designer selected growth algorithms then arbitrate the spatial relationships between the unit forms and their propagation through the developing design. While the Sketcher implements only the GRID as an organizational discipline, many other paradigms are possible. Within this grid structure a robust set of editing features, supported by the computer’s inherent speed, allows the designer to analyze successive productions while refining ever more complex solutions. Through creative manipulation of these algorithmic structures ideas eventually coalesce to formalize images that represent a given design problem’s solution set.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	64b8
authors	Grabowski, M. and Barner, K.
year	1998
title	Data Visualization Methods for the Blind using Force Feedback and Sonification
source	Stein, M. (Ed.). Telemanipulator and Telepresence Technologies V. Vol. 3524
summary	Research in the field of scientific visualization has begun to articulate systematic methods for mapping data to a perceivable form. Most work in this area has focused on the visual sense. For blind people in particular, systematic visualization methods which utilize other sense need further development. In this work we develop methods for adding aural feedback to an existing haptic force feedback interface to create a multimodal visualization system. We examine some fundamental components of a visualization system which include the following: characterization of the data, definition of user directives and interpretation aims, cataloging of sensual representations of information, and finally, matching the data and user interpretation aims with the appropriate sensual representations. We focus on the last two components as they relate to the aural and haptic sensor. Cataloging of sensual representations is drawn form current research in sonification and haptics. The matching procedure can be thought of as a type of encoding which should be the inverse of the decoding mechanism of our aural and haptic systems. Topics in human perception are discussed, and issues related to the interaction between the two sensor are addressed. We have implemented a visualization system in the from of a Windows NT application using a sound card and a 3 DOF point interaction haptic interface. The system present a 2D data set primarily as a polygonal haptic surface although other capabilities of the haptic sensor are utilized such as texture discernment. In addition, real time aural feedback is presented as the user explores the surface. Parameters of sound such as pitch and spectral content are used to convey information. Evaluation of the system's effectiveness as an assistive technology for the blind reveals that combining aural and haptic feedback improves visualization over using either of the two senses alone.
series	other
last changed	2003/04/23 15:14

_id	c125
authors	LaViola, J., Holden, L.S., Forsberg, A.S., Bhuphaibool, D.S. and Zeleznik, R.C.
year	1998
title	Collaborative Conceptual Modeling Using the SKETCH Framework
source	Proceedings of IASTED International Conference on Computer Graphics and Imaging, 154-158
summary	This paper introduces NetSketch, an application that supports distributed conceptual design by providing tools for modelessly creating, manipulating and viewing 3D models in a shared virtual space. Inherent problems exist with collaborative design tools because of the simultaneous group interaction required for users to smoothly and effectively work together in the same virtual space. With NetSketch, we provide solutions to these problems by providing a fast and direct gesture-based user interface, a set of visual effects that better enable a user's awareness of operations done by other participants, and a set of tools for enhancing visual communication between participants.
series	other
last changed	2003/04/23 15:50

_id	8b37
authors	Massie, T.
year	1998
title	A Tangible Goal for 3D Modeling
source	IEEE Computer Graphics and Applications. pp. 62 - 65. Vol. 18, Issue: 3
summary	Although the speed of computers increases exponentially, the amount and quality of useful work that we perform on them seems to increase linearly at best. Faster processors are not enough-to significantly increase the utility of computers requires new computer interfaces. The keyboard was adequate for text-based applications, but the advent of the desktop metaphor and windows computing environment demanded a new mechanical interface-the mouse. As we progress into applications that incorporate interactive life-like 3D computer graphics, the mouse falls short as a user interface device, and it becomes obvious that 3D computer graphics could achieve much more with a more intuitive user interface mechanism. Haptic interfaces, or forcefeedback devices, promise to increase the quality of humancomputer interaction by accommodating our sense of touch. Of all the senses, only touch is bidirectional-allowing us to perceive and change objects simultaneously in the same location. Because the sense of touch is so compelling, researchers have studied it for some time.1,2 (Refer to the annual proceedings of the Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, published by the American Society of Mechanical Engineers, New York.) Various commercial devices are now available that can accommodate1 even seven degrees of freedom. I used the three degrees-of-freedom Phantom haptic interface for most of the interactions described in this article. Users interact with the Phantom interface with their finger in a thimble or by holding a stylus
series	journal paper
last changed	2003/04/23 15:50

_id	489a
authors	Matthews, K., Duff, S. and Corner, D.
year	1998
title	A Model for Integrated Spatial and Structural Design of Buildings
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 123-132
doi	https://doi.org/10.52842/conf.caadria.1998.123
summary	Recent advances in computer graphics and 3D user interfaces have enabled the emergence of 3D sketch modeling as a viable approach to architectural design, especially in the early schematic phase. This paper describes how a system can be built and used which integrates the capabilities of a good structural analysis system in the user-friendly working environment of a design-oriented modeling program. The structure of a building model as seen by finite element algorithms is a schematic idealization of the building's physical structure into nodes, elements, internal releases, boundary conditions, and loads. The more familiar architectural model used for design visualization represents spatial elements such as roofs, floors, walls, and windows. Rather than treat these models independently, the structural model can be defined in relation to the architectural as a virtual model with inherited common characteristics and additional relational and attribute information, using feature-based geometry data structures to organize topological intelligence in the spatial model. This provides the basis for synchronous modification of structural and architectural aspects of the design.
keywords	Structural Design, Spatial Design, Design Integration, Human-Computer Interaction, Feature-Based Modeling, Finite Element Analysis, Geometric Inference
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:58

For more results click below: