Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 555

Reformat results as: short short into frame detailed detailed into frame

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	avocaad_2001_19
id	avocaad_2001_19
authors	Shen-Kai Tang, Yu-Tung Liu, Yu-Sheng Chung, Chi-Seng Chung
year	2001
title	The visual harmony between new and old materials in the restoration of historical architecture: A study of computer simulation
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In the research of historical architecture restoration, scholars respectively focus on the field of architectural context and architectural archeology (Shi, 1988, 1990, 1991, 1992, 1995; Fu, 1995, 1997; Chiu, 2000) or on architecture construction and the procedure of restoration (Shi, 1988, 1989; Chiu, 1990). How to choose materials and cope with their durability becomes an important issue in the restoration of historical architecture (Dasser, 1990; Wang, 1998).In the related research of the usage and durability of materials, some scholars deem that, instead of continuing the traditional ways that last for hundreds of years (that is to replace new materials with old ones), it might be better to keep the original materials (Dasser, 1990). However, unavoidably, some of the originals are much worn. Thus we have to first establish the standard of eliminating components, and secondly to replace identical or similar materials with the old components (Lee, 1990). After accomplishing the restoration, we often unexpectedly find out that the renewed historical building is too new that the sense of history is eliminated (Dasser, 1990; Fu, 1997). Actually this is the important factor that determines the accomplishment of restoration. In the past, some scholars find out that the contrast and conflict between new and old materials are contributed to the different time of manufacture and different coating, such as antiseptic, pattern, etc., which result in the discrepancy of the sense of visual perception (Lee, 1990; Fu, 1997; Dasser, 1990).In recent years, a number of researches and practice of computer technology have been done in the field of architectural design. We are able to proceed design communication more exactly by the application of some systematic softwares, such as image processing, computer graphic, computer modeling/rendering, animation, multimedia, virtual reality and so on (Lawson, 1995; Liu, 1996). The application of computer technology to the research of the preservation of historical architecture is comparatively late. Continually some researchers explore the procedure of restoration by computer simulation technology (Potier, 2000), or establish digital database of the investigation of historical architecture (Sasada, 2000; Wang, 1998). How to choose materials by the technology of computer simulation influences the sense of visual perception. Liu (2000) has a more complete result on visual impact analysis and assessment (VIAA) about the research of urban design projection. The main subjects of this research paper focuses on whether the technology of computer simulation can extenuate the conflict between new and old materials that imposed on visual perception.The objective of this paper is to propose a standard method of visual harmony effects for materials in historical architecture (taking the Gigi Train Station destroyed by the earthquake in last September as the operating example).There are five steps in this research: 1.Categorize the materials of historical architecture and establish the information in digital database. 2.Get new materials of historical architecture and establish the information in digital database. 3.According to the mixing amount of new and old materials, determinate their proportion of the building; mixing new and old materials in a certain way. 4.Assign the mixed materials to the computer model and proceed the simulation of lighting. 5.Make experts and the citizens to evaluate the accomplished computer model in order to propose the expected standard method.According to the experiment mentioned above, we first address a procedure of material simulation of the historical architecture restoration and then offer some suggestions of how to mix new and old materials.By this procedure of simulation, we offer a better view to control the restoration of historical architecture. And, the discrepancy and discordance by new and old materials can be released. Moreover, we thus avoid to reconstructing ¡§too new¡¨ historical architecture.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9801
id	ddss9801
authors	Achten, Henri and Leeuwen, Jos van
year	1998
title	A Feature-Based Description Technique for Design Processes: A Case Study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series	DDSS
last changed	2003/11/21 15:15

_id	c373
authors	Baldwin, A.N., Austin, S.A., Hassan, T.M. and Thorpe, A.
year	1998
title	Planning building design by simulating information flow
source	Automation in Construction 8 (2) (1998) pp. 149-163
summary	Successful project management requires the effective control of the design teams and the exchange of information between them for successful design management. This paper describes a methodology involving discrete event simulation that can help the planning and control of building design. Discipline-based information flow models of the building design process are used to define the activities of the simulation model, concentrating on the concept and schematic design stages. Factors such as task durations and resources are then allocated along with any specific constraints that are to be evaluated. The model predicts the outcomes of the specific scenario of information related events, including design schedules and resource histograms. The paper describes the development and validation of the simulation model and discusses its potential application during the planning and design phases of building projects. It is concluded that this approach could form the basis of a useful tool for design managers responsible for multidisciplinary building design work.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	56
authors	Barron, Alicia and Chiarelli, Julia
year	1998
title	Proyecto Para la Red de un Estudio de Arquitectura (Project for the Network of a Studio of Architecture)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 418-425
summary	A consequence of the globalization on information processes in the way in which new technologies influence on design and production processes. There is no doubt that there is an increasingly and a big change in the areas of architecture design concerning to the operational and working methodology on graphic and alphanumeric information. Now a day it is not a far away Utopia, but a soon to come reality that architects interact in a virtual manner with their individual or institutional clients in their own country, as well as in foreign countries. Keeping these considerations in mind, we elaborated this Paper in order to present one of the existing criteria for the organization of graphic information jointly with its spatial relationship. The work presented herewith shows the development of an informatic net for an ideal mega-studio which in its professional and entrepreneurial profile covers tasks such as design, construction, graphic design and representation of foreign concerns. In the net design and in the selection of equipment for computing design area are covered all the variables at every instance.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ddss9810
id	ddss9810
authors	Celebi, Gulser
year	1998
title	Development of a Building System
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The universal principle of architecture can be defined as follows: “The architectural product is the synthesis of the different man-made physical environments that are formed by locating the series of building components in different ways”. Within this context; it is necessary to determine the principle of building assembly and the assembly of ‘material components’ in order to produce the building. The material components are the elements of sub systems (such as; structural, envelope, services, partitions, circulation, and finishing systems) which form the building system of an architectural product. Every building is an integrated product. Integration defines the relations of sub systems with the whole. Therefore, it is necessary to define the sub systems and their relations in realizing the architectural product. This paper presents the analysis principles of the sub-systems, relationship between the analyzed systems and components, integration principles and possibilities of them, and the future conditions.
series	DDSS
last changed	2003/08/07 16:36

_id	fb22
authors	Chien, Sheng-Fen
year	1998
title	Supporting information navigation in generative design systems
source	Camegie Mellon University, School of Architecture
summary	Generative design systems make it easier for designers to generate and explore design altematives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed to enable designers to access the information with ease. Such aids may improve the usability of generative design systems and encourage their use in architectural practice. This dissertation presents a comprehensive approach to support navigation in generative design systems. This approach takes account of studies related to human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. It contains a general model of design space, basic navigation operations, and principles for designing navigation support. The design space model describes how the space may grow and evolve along predictable dimensions. The basic operations facilitate navigation activities in this multi-dimensional design space. The design principles aim at guiding system developers in creating navigation utilities tailored to the needs of individual design systems. This approach is validated through prototype implementations and limited pilot usability studies. The validity of the design space model and basic navigation operations is examined through the development of a design space navigation framework that encapsulates the model and operations in a software environment and provides the infrastructure and mechanisms for supporting navigation. Three prototype navigation tools are implemented using this framework. These tools are subjected to usability studies. The studies show that these tools are easy to leam and are efficient in assisting designers locating desired information. In summary, it can be demonstrated that through the prototype implementations and usability studies, this approach offers sufficient support for the design and implementation of navigation aids in a generative design system. The research effort is a pioneer study on navigation support in generative design systems. It demonstrates why navigation support is necessary; how to provide the support; and what types of user interaction it can offer. This research contributes to information navigation studies not only in the specific domain of generative design system research, but also in the general field of human-computer interaction.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	1d83
authors	Dodge, M., Doyle, S. and Smith, A.
year	1998
title	Visual Communication in Urban Planning and Urban Design
source	Working Paper 2; Centre for Advanced Spatial Analysis Working Papers; London; June 1998
summary	This Case Study documents the current status of visual communication in urban design and planning. Visual communication is examined through discussion of standalone and network media, specifically concentrating on visualisation on the World Wide Web (WWW). First, we examine the use of Solid and Geometric Modelling for visualising urban planning and urban design. This report documents and compares examples of the use of Virtual Reality Modelling Language (VRML) and proprietary WWW based Virtual Reality modelling software. Examples include the modelling of Bath and Glasgow using both VRML 1.0 and 2.0. The use of Virtual Worlds and their role in visualising urban form within multi-user environments is reviewed. The use of Virtual Worlds is developed into a study of the possibilities and limitations of Virtual Internet Design Arena's (ViDA's), an initiative undertaken at the Centre for Advanced Spatial Analysis, University College London. The use of Virtual Worlds and their development towards ViDA's is seen as one of the most important developments in visual communication for urban planning and urban design since the development plan. Secondly, the role of photorealistic media in the process of communicating plans is examined. The process of creating photorealistic media is documented, and examples of the Virtual Streetscape and Wired Whitehall Virtual Urban Interface System are provided. The conclusion is that, although the use of photo-realistic media on the WWW provides a way to visually communicate planning information, its use is limited. The merging of photorealistic media and solid geometric modelling in the creation of Augmented Reality is reviewed. Augmented Reality is seen to provide an important step forward in the ability quickly and easily to visualise urban planning and urban design information. Third, the role of visual communication of planning data through GIS is examined in terms of desktop, three dimensional, and Internet based GIS. The evolution to Internet GIS is seen as a critical component in the development of virtual cities that will allow urban planners and urban designers to visualise and model the complexity of the built environment in networked virtual reality. Finally, a viewpoint is put forward of the Virtual City, linking Internet GIS with photorealistic multi-user Virtual Worlds. At present there are constraints on how far virtual cities can be developed, but a view is provided on how these networked virtual worlds are developing to aid visual communication in urban planning and urban design.
series	other
last changed	2003/04/23 15:50

_id	4062
authors	Flanagan Robert and Shannon, Kelly
year	1998
title	Digital Studio Confronts Tradition
source	Computers in Design Studio Teaching [EAAE/eCAADe International Workshop Proceedings / ISBN 09523687-7-3] Leuven (Belgium) 13-14 November 1998, pp. 65-71
doi	https://doi.org/10.52842/conf.ecaade.1998.065
summary	This is a record of a collaborative teaching effort of two architect/educators, each contributing theoretical components to the educational process necessary for the development of an urban housing strategy vis à vis an integrated digital/judgment effort. Twenty graduate architecture students were involved in this ‘computer design studio’. The focus of the studio was the 1997 Otis Elevator Housing Design Competition. A prerequisite introductory computer class was required for participation in this studio. Two distinct analysis and design methodologies were introduced; one concentrating on the formal tectonic aspects of architecture and the other highlighting the multiplicity, and often competing, forces shaping the built reality. The summary offered at the conclusion of this document both supports and questions the direction of the class as a whole and further classifies the relative success and failures of the individual student initiatives. In some cases, the computer simply facilitated (and occasionally hindered) progress. In the most opportunistic examples, the computer undoubtedly changed both the process and the consequence of the design effort.
series	eCAADe
email
more	http://www.eaae.be/
last changed	2022/06/07 07:51

_id	ddss9828
id	ddss9828
authors	Holmberg, Stig C.
year	1998
title	Anticipation in Evaluation and Assessment of Urban and Regional Plans
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to start a move toward better computer based supporting tools for the assessment of urban and regional plans, a new research and development endeavour is proposed. In so doing, anticipation andanticipatory computing, i.e. a technique applying modelling and simulation, is found to be an interesting and promising point of departure. Hence, a fuzzy cellular automata computer model (STF) for simulation and anticipation of geographical or physical space is constructed. The main idea is to map anurban plan onto the STF for its assessing. STF has a normalised and continuous, i.e. fuzzy, system variable while both the time and space dimensions take on discrete values. Further, while ordinary cellularautomata use local rules, global ones are employed in STF, i.e. there is a total interdependence among all the cells of the automata. Outcomes of STF can be interpreted more as possible future states than exact predictions. Preliminary results seem to be well in line with main characteristics of planned urban or regional geographical spaces. Further, for the managing of multi-criteria choice situations, a fuzzy procedure – the Ordered Weighted Average (OWA) procedure – with continuous control over the degree of ANDOR-ness and with independent control over the degree of tradeoff, is proposed.
keywords	Geographical space, Anticipatory Computing, Cellular Automata, Spatio Temporal Fuzzy Model (STF)
series	DDSS
last changed	2003/08/07 16:36

_id	0beb
authors	Koch, Volker and Russell, Peter
year	2000
title	VuuA.Org: The Virtual Upperrhine University of Architecture
source	Promise and Reality: State of the Art versus State of Practice in Computing for the Design and Planning Process [18th eCAADe Conference Proceedings / ISBN 0-9523687-6-5] Weimar (Germany) 22-24 June 2000, pp. 23-25
doi	https://doi.org/10.52842/conf.ecaade.2000.023
summary	In 1998, architecture schools in the three nation region of the upper Rhine came together to undertake a joint design studio. With the support of the Center for Entrepeneurship in Colmar, France, the schools worked on the reuse of the Kuenzer Mill situated near Herbolzheim, Germany. The students met jointly three times during the semester and then worked on the project at their home universities usng conventional methods. This project was essential to generating closer ties between the participating students, tutors and institutions and as such, the results were quite positive. So much so, that the organisers decided to repeat the exercise one year later. However, it became clear that although the students had met three times in large groups, the real success of a co-operative design studio would require mechanisms which allow far more intimate interaction among the participants, be they students, teachers or outside experts. The experiences from the Netzentwurf at the Institut für Industrielle Bauproduktion (ifib) showed the potential in a web based studio and the addition of ifib to the three nation group led to the development of the VuuA platform. The first project served to illuminate the the differences in teaching concepts among the partner institutions and their teaching staff as well as problems related to the integration of students from three countries with two languages and four different faculties: landscape architecture, interior design, architecture and urban planning. The project for the Fall of 1999 was the reuse of Fort Kléber in Wolfisheim by Strasbourg, France. The students again met on site to kick off the Semester but were also instructed to continue their cooperation and criticism using the VuuA platform.
keywords	Virtual Design Studio, CSCW, International Cooperation, Planning Platform
series	eCAADe
email
more	http://www.vuua.org
last changed	2022/06/07 07:51

_id	c38b
authors	Kunz, J.C., Christiansen, T.R., Cohen, G.P., Jin, Y. and Levitt, R.E.
year	1998
title	The Virtual Design Team
source	Communications of The ACM, Vol. 41, No. 11, November, 1998
summary	The long range goal of the Virtual Design Team" (VDT) research program is to develop computational tools to analyze decision making and communication behavior and thereby to support true organizational (re)engineering. This article introduces the underlying theory, the implementation of the theory as a computational model, and results from industrial test cases. Organization theory traditionally describes organizations only at an aggregate-level, describing and predicting the behavior of entire organizations in terms of general qualitative predictions. We define and implement a "micro" theory of the structure and behavior of components of organizations, explicitly representing activities, groups of people called "actors," and organizational structure and policies for project teams. A VDT model can be "run" by a discrete event simulation. Emergent aggregate model output behaviors include the predicted time to complete a project, the total effort to do the project, and a measure of process quality. More detailed model behaviors include the time-varying backlog of individual actors and the "exceptions" associated with activities. The results are detailed and specific, so they can guide specific managerial interventions in a project team and can support sensitivity studies of the relative impact of different organizational changes. We conclude that such a theory is tractable and predictive for complex but relatively routine, project-oriented design tasks. The application for which VDT offers unique new kinds of insights is where an organization is striving to shrink time to market dramatically for a product that is similar to ones it has previously developed. Reducing time to market dramatically almost always requires that previously sequential activities are executed more concurrently. In this situation, experienced managers can still correctly identify the required activities and estimate their durations and skill requirements; but they almost always underestimate the increased workload arising from exponentially higher coordination needs and the propagation of rework between the now highly concurrent activities. The VDT framework, which explicitly models information dependency and failure propagation between concurrent activities, has proven to be far more accurate, and to incorporate a wider range of parameters, than CPM/PERT process models for these fast-paced development projects."
series	journal paper
last changed	2003/04/23 15:50

_id	ddss9835
id	ddss9835
authors	Langelaan, J. Willem R.
year	1998
title	Criteria for an object oriented library system of high–level parametric CADelements
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The subject of this paper is the development of criteria and specifications for an object oriented library system of high–level parametric elements that have an integrated 2D and 3D representation. High–levelelements are virtual representations of architectural elements such as windows, doors, etc. High–level parametric elements need few components to be flexible and easily customizable. The generalization ofeach element by its characteristic parts results in a substantial reduction in the number of polygons that must be processed by the computer during the 3D transformation, graphically clean 3D images and low demandon user intervention. Gestalt theory emphasizes the importance of contour lines for the perception of an element. The “minimalist” symbolic representation will simplify contour lines that enhance perception. Theinherent flexibility and functionality of object oriented elements are augmented when the elements are rigorously developed as an object oriented library system, with classes and sub-classes of elements whichinherit characteristics of the parent–class. Attribute values of a parent–class give the user global control over all instances of that class and its sub–classes in the model’s database. The concepts which SystemsTheory uses for making an abstraction of reality are analogous to the concepts used in object oriented programming. This paper describes how Systems Theory is used as tool to develop high–level parametric elements as a functionally and computationally efficient library system.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9838
id	ddss9838
authors	Mallory-Hill, Shauna
year	1998
title	Building a Case-Based Design Assistant forWorkplace Environment Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper reports on the early stages of development of a case-based design tool. The purpose of this tool, called the Workplace Environment Design Advisor (WEDA), is to support architects in the conceptual design of workplace environments. The objective of this system is to provide electronic storage, retrieval and the exploration of post-occupancy performance knowledge of workplace environments. The paper provides a description of the reasoning behind choosing a case-based approach and thesteps used to develop a prototype case-based system. This includes recent efforts to collect and structure real case data. This experience led to observations about issues such as case content (the availability and format of post-occupancy data) and retrieval strategies. The data collected for use in the system is based on a building-in-use study of the Centre ofBuilding Research’s office rooms located at the University of Eindhoven, the Netherlands.
series	DDSS
last changed	2003/08/07 16:36

_id	170f
authors	Mora Padrón, Víctor Manuel
year	1999
title	Integration and Application of Technologies CAD in a Regional Reality - Methodological and Formative Experience in Industrial Design and Products Development
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 295-297
summary	The experience to present is begun and developed during the academic year 1998, together to the course of IV pupils level of the Industrial Design career in the Universidad del Bío-Bío, labor that I have continued assuming during the present year, with a new youths generation. We have accomplished our academic work taking as original of study and base, the industrial and economic situation of the VIII Region, context in the one which we outline and we commit our needs formative as well as methodological to the teaching of the discipline of the Industrial Design. Consequently, we have defined a high-priority factor among pupils and teachers to reach the objectives and activities program of the course, the one which envisages first of all a commitment of attitude and integrative reflection among our academic activity and the territorial human context in the one which we inhabit. In Chile the activity of the industrial designer, his knowledge and by so much his capacity of producing innovation, it has been something practically unknown in the industrial productive area. However, the current national development challenges and the search by widening our markets, they have created and established a conscience of the fact that the Chilean industrial product must have a modern and effective competitiveness if wants be made participates in segments of the international marketing. It is in this new vision where the design provides in decisive form to consider and add a commercial and cultural value in our products. To the university corresponds the role of transmitting the knowledge generated in his classrooms toward the society, for thus to promote a development in the widest sense of the word. Under this prism the small and median regional industry in their various areas, have not integrated in the national arrangement in what concerns to the design and development of new and integral products. The design and the innovation as motor concept for a competitiveness and permanency in new markets, it has not entered yet in the entrepreneurial culture. If we want to save this situation, it is necessary that the regional entrepreneur knows the importance of the Design with new models development and examples of application, through concrete cases and with demands, that serve of base to demonstrate that the alliance among Designer and Industry, opens new perspectives of growth upon offering innovation and value added factors as new competitiveness tools. Today the communication and the managing of the information is a strategic weapon, to the moment of making changes in a social dynamics, so much at local level as global. It is with this look that our efforts and objective are centered in forming to our pupils with an integration speech and direct application toward the industrial community of our region, using the communication and the technological information as a tool validates and effective to solve the receipt in the visualization of our projects, designs and solutions of products. As complement to the development of the proposed topic will be exhibited a series of projects accomplished by the pupils for some regional industries, in which the three dimensional modeling and the use of programs vectoriales demonstrate the efficiency of communication and comprehension of the proposals, its complexity and constructive possibilities.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	39e5
authors	Oloufa, A.A., Ikeda, M. and Nguyen, T.
year	1998
title	Resource-based simulation libraries for construction
source	Automation in Construction 7 (4) (1998) pp. 315-326
summary	Discrete event simulation modeling has been used successfully in a wide range of industrial and manufacturing applications. In construction applications, even though simulation has been applied, it still is extremely limited in terms of wide deployment in construction projects. Several reasons limit the effective implementation of this technology in construction. Chief among them is the time needed to develop the simulation model. While developing models for industrial applications is just as time consuming, the perpetual nature of manufacturing activities, may make this investment worthwhile. However, this is not the case in construction. In this research, the authors approach the problem through the development of a library of preprogrammed construction resources. The user need only select the required resources, and specify the project logic by linking these resources together. Benefits of this approach are the increased communication between the members of the construction team. Also the potential application of simulation tools in unforeseen construction situations where the time associated with hiring a simulation programmer may not available and a quick response is required.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	63d1
authors	Rapid Prototyping Group Rapid Design and Manufacture Centre (RDM), Ryder, G., Ion, B., Green, G., Harrison, D. and Wood, Bruce
year	2002
title	Rapid design and manufacture tools in architecture
source	Automation in Construction 11 (3) (2002) pp. 279-290
summary	The continuing development of Rapid Prototyping technologies and the introduction of Concept Modelling technologies means that their use is expanding into a greater range of applications. The primary aim of this paper is to give the reader an overview of the current state of the art in Layered Manufacturing (LM) technology and its applicability in the field of architecture. The paper reports on the findings of a benchmarking study, conducted by the Rapid Design and Manufacturing (RDM) Group in Glasgow [G.J. Ryder, A. McGown, W. Ion, G. Green, D. Harrison, B. Wood, Rapid Prototyping Feasibility Report, Rapid Prototyping Group, Glasgow School of Art, 1998.], which identified that the applicability of LM technologies in any application can be governed by a series of critical process and application specific issues. A further survey carried out by the RDM group investigated current model making practice, current 3D CAD use and current use of LM technologies within the field of architecture. The findings are then compared with the capabilities of LM technologies. Future research needs in this area are identified and briefly outlined.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	6311
authors	Rychter, Zenon
year	1998
title	Event Driven Turtle as Pattern Generator
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 163-176
summary	Computer programming is a powerful exploratory design tool. A simple algorithm can produce results of unexpected complexity, variety, and appeal. By mimicking evolution in nature, rich global states are gradually developed over time by iteration of elementary local rules. Fractal images and life-game simulations are two well known examples. This paper presents a pattern-generating application based on the walking turtle metaphor. The turtle has an intelligence of its own, can be randomly disturbed or directed interactively by the user. Several snapshots are shown of amazingly diverse patterns left by the turtle walking in various modes. Advantages of object-oriented visual programming environments for rapid application development are discussed.
series	plCAD
last changed	1999/04/08 17:16

_id	e679
authors	Seichter, H., Donath, D. and Petzold, F.
year	2002
title	TAP – The Architectural Playground - C++ framework for scalable distributed collaborative architectural virtual environments
source	Connecting the Real and the Virtual - design e-ducation [20th eCAADe Conference Proceedings / ISBN 0-9541183-0-8] Warsaw (Poland) 18-20 September 2002, pp. 422-426
doi	https://doi.org/10.52842/conf.ecaade.2002.422
summary	Architecture is built information (Schmitt, 1999). Architects have the task of restructuring and translating information into buildable designs. The beginning of the design process where the briefing is transformed into an idea is a crucial phase in the design process. It is where the architect makes decisions which influence the rest of the design development process (Vries et al., 1998). It is at this stage where most information is unstructured but has to be integrated into a broad context. This is where TAP is positioned – to support the architect in finding solutions through the creation of spatially structured information sets without impairing thereby the creative development. We want to enrich the inspiration of an architect with a new kind of information design. A further aspect is workflow in a distributed process where the architect’s work becomes one aspect of a decentralised working patterns. The software supports collaborative work with models, sketches and text messages within an uniform surface. The representations of the various media are connected and combined with each other and the user is free to combine them according to his or her needs.
series	eCAADe
email
last changed	2022/06/07 07:59

For more results click below: