Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 553

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9803
id	ddss9803
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1998
title	Extending spatial DSS with spatial choice models of multipurpose shopping trip behaviour
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Spatial choice or interaction models have been widely used in spatial DSS or customised GIS for analysing the impacts of retail location plans. The models typically used, however, do not account for spatial agglomeration effects on spatial choice behaviour. This study develops a model system for analysing the impacts of retail plans based on a choice model of multipurpose behaviour developed in earlier work. The model system is implemented in the spatial DSS called Location Planner. An empirical study demonstrates the empirical estimation and use of the model for analysing the impacts of an expansion of floor space in the major shopping centre of a middle-sized city in The Netherlands. The results indicate that agglomeration effects as predicted by the model can have substantial impacts on the performance of retail systems. Therefore, it is argued that when incorporated in a spatial DSS, the more complex models have the potential to improve the use of these systems for impact analysis.
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9806
id	ddss9806
authors	Besio, M., Frixione, M. and Pedemonte, O.
year	1998
title	GIS technologies in the transfer of theknowledge project to the plan projectmultiple representation of the environmental spaces
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	An analysis is made of the relation between the conceptualand paradigmatic level of GIS technologies and the new forms of plan, whichmake environment the center of attention. The intention is to study newcriteria for zoning able to give contextual representations of theterritorial, environmental and landscape aspects of the geographical space,and also to study new legislative principles, able to establish integratedrules for theprojecting of soil uses, the safeguarding and recovery ofenvironmental systems and the tutelage and boosting of the landscape. The experimentation of GIS (Geographical Information System)technologies aims at the construction of systems helping to make decisionsfor the control of the environmental and landscape aspects of theterritory. An analysis is made of the ways in which there are formulated thedescriptions of the various aspects of the environment: the conceptsthrough which knowledge is expressed, the languages used forrepresentations, the cognitive models adopted. GIS technologies have made it possible to represent in an explicitmanner the paradigms underlying the various models of knowledge.Specifically, the following cognitive models have been developed:- ecological models of nature- ecological models of human settlement- ecological models of inhabitants’ mental perceptions
series	DDSS
last changed	2003/11/21 15:16

_id	f288
authors	Bille, Pia
year	1999
title	Integrating GIS and Electronic Networks In Urban Design and Planning
source	Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
doi	https://doi.org/10.52842/conf.ecaade.1999.722
summary	In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords	Urban Planning, Electronic Collaboration, GIS, Data Bases
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ddss9808
id	ddss9808
authors	Boelen, A.J.
year	1998
title	Pattern Matching for Decision Support
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In this paper is discussed how we can use pattern matching techniques in combination with object orientation to support decision makers in arranging offices and industrial and commercial facilities in existing urban areas. The method used is based on the findings of a Ph.D. project almost finishedwhen writing this. The tool under development is specifically useful for rehabilitation of deteriorated industrial or commercial areas.I consider such an area already occupied and surrounded with all kinds of urban objects and connected to all kinds of infrastructure. I can describe this area in available objects and facilities. Furthermore we can describe the areas capacity left within the infrastructure, the capacity in forexample work force or clients and the available band width in noise or pollution. By describing the area in terms of availability of capacity to absorb or produce flows of people, goods, energy and information we sketch the room available for certain types of industrial or commercial facilities. I developed a technique to describe industrial and commercial facilities in such a way that we enable the match between these and the characteristics of an area available. Pattern matching techniquesenable the system to generate best matches between available areas, locations and facilities. This model can be adapted in several object oriented geographical information systems and be integrated with other information systems that for example calculate the pollution of certain kinds of facilities. The rules to match with are partly based on objective, measurable data like available capacity on the electricity network and needed electrical power for certain facilities. Other matching rules are based on political norms on for example acceptable pollution levels and suggested pollution of facilities. The paper presents the problem area of industrial area rehabilitation, describes the architecture of the modeling technique and presents the first findings of implementation studies.
keywords	Pattern matching, Object GIS, Urban object modeling, Facility planning
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9809
id	ddss9809
authors	Brondino, Nair Cristina Margarido and Da Silva, Antônio Nélson Rodrigues
year	1998
title	A comparison of land valuation methods supported by GIS
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The purpose of this work was to study three different strategies for the appraisal of urban land. The first, a theoretical strategy created by the authors of this study to reproduce the common conditions of Brazilian cities, uses increments and reductions in the value of a square meter of land according to each lot’s individual features. The second method, based on Multiple Regression techniques, is widely used for valuation purposes. Finally, the effectiveness of Artificial Neural Networks to deal with thiskind of problem is studied. A sample of 157 lots was collected from several neighbourhoods of a small Brazilian city for the case study. The lot features recorded were area, width, shape, distance to the downtown district of the city through the street network, existence of fences and paved sidewalks, and market price. Prediction errors have been estimated for each of the three methods in order to compare their results. Predicted and error values, added to Geographical Information Systems, may be used to build thematic maps and to check how each strategy applies to different areas of the city. The analyses of error values conducted in this study showed that Artificial Neural Networks presented the best performance as a land appraisal method for the case studied.
series	DDSS
email
last changed	2003/11/21 15:16

_id	1d83
authors	Dodge, M., Doyle, S. and Smith, A.
year	1998
title	Visual Communication in Urban Planning and Urban Design
source	Working Paper 2; Centre for Advanced Spatial Analysis Working Papers; London; June 1998
summary	This Case Study documents the current status of visual communication in urban design and planning. Visual communication is examined through discussion of standalone and network media, specifically concentrating on visualisation on the World Wide Web (WWW). First, we examine the use of Solid and Geometric Modelling for visualising urban planning and urban design. This report documents and compares examples of the use of Virtual Reality Modelling Language (VRML) and proprietary WWW based Virtual Reality modelling software. Examples include the modelling of Bath and Glasgow using both VRML 1.0 and 2.0. The use of Virtual Worlds and their role in visualising urban form within multi-user environments is reviewed. The use of Virtual Worlds is developed into a study of the possibilities and limitations of Virtual Internet Design Arena's (ViDA's), an initiative undertaken at the Centre for Advanced Spatial Analysis, University College London. The use of Virtual Worlds and their development towards ViDA's is seen as one of the most important developments in visual communication for urban planning and urban design since the development plan. Secondly, the role of photorealistic media in the process of communicating plans is examined. The process of creating photorealistic media is documented, and examples of the Virtual Streetscape and Wired Whitehall Virtual Urban Interface System are provided. The conclusion is that, although the use of photo-realistic media on the WWW provides a way to visually communicate planning information, its use is limited. The merging of photorealistic media and solid geometric modelling in the creation of Augmented Reality is reviewed. Augmented Reality is seen to provide an important step forward in the ability quickly and easily to visualise urban planning and urban design information. Third, the role of visual communication of planning data through GIS is examined in terms of desktop, three dimensional, and Internet based GIS. The evolution to Internet GIS is seen as a critical component in the development of virtual cities that will allow urban planners and urban designers to visualise and model the complexity of the built environment in networked virtual reality. Finally, a viewpoint is put forward of the Virtual City, linking Internet GIS with photorealistic multi-user Virtual Worlds. At present there are constraints on how far virtual cities can be developed, but a view is provided on how these networked virtual worlds are developing to aid visual communication in urban planning and urban design.
series	other
last changed	2003/04/23 15:50

_id	ddss9820
id	ddss9820
authors	Fukui, H.
year	1998
title	An Example of Visualization for Urban Economic Scenery andUrban Modeling using GIS
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper presents a zone-based urban model to forecast population distribution and land use transition. A GIS model has been suggested for urban economic scenery forecasting by using data related to an urban environment like Tokyo in Japan. The model has structural simplicity, visibility and applicability of policy analysis.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9831
id	ddss9831
authors	Kellett, Ronald and Girling, Cynthia
year	1998
title	Informing Public Participation in Neighborhood ScalePlanning and Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Neighborhood scale planning and design in many areas of the United States has been evolving toward a system of negotiated priorities and agreements. Common models include public workshops and design 'charrettes' which bring diverse stakeholders (citizens, land owners, developers, consultantsand public officials, for example) together to develop a mutually acceptable plan. Crucial to the quality and effectiveness of the outcome are decision support tools that help this diverse audience understand, communicate, collaborate and make decisions about complex and often emotional issuesof land use and design. Net Energy Communities (NEC), the project summarized in this paper, creates a suite of computer based tools for this purpose. NEC links three types of computer software — the spatial data manipulation, modeling and visualization capabilities of Geographic Information Systems (GIS), the illustration and information retrieval capabilities of multimedia relational databases and, the simulation and comparison capabilities of spreadsheet-based calculation models;into four tools — a site modeller, an elements of neighborhood database, a scenario modeller and ascenario calculator. This paper reports on the NEC project as an example of decision support tools for public participation using illustrations and examples from a 420 acre demonstration neighborhood design in progress for the City of Corvallis, Oregon, USA.
series	DDSS
last changed	2003/08/07 16:36

_id	6df0
authors	Komatsu, Kiichiro and Watanabe, Shun
year	1998
title	Spatial Database for Model Analysis Methods
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 203-212
doi	https://doi.org/10.52842/conf.caadria.1998.203
summary	In the field of architectural and urban planning and design, computer education needs to move beyond basic computer literacy and have more emphasis placed on special subjects related to planning and design. How to manage spatial data is becoming an essential issue for research and education in planning and design especially in the analysis and evaluation phases. This paper discusses the importance of spatial data in planning education and shows how a common spatial database for model analysis methods was constructed at the University of Tsukuba. The database consists of many geographical and statistical data files classified under the standard region mesh codes and covers the whole country from global areas to local areas. Web-based instructions about how to use the database have also been prepared which enable students to study practical spatial analysis by themselves.
keywords	Education, Database, GIS, Spatial Analysis
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:51

_id	2b30
authors	Mejía, Ricardo Cuberos
year	1998
title	Integration of CAD on a Planning Support System Experiences in Urban Planning of Altagracia
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 53-74
summary	This paper relates to the group of strategies of information automation utilized for the development of a planning support system, conceived for the preparation of the urban plan of an intermediate city, with semi-industrial, tourist and fishing character, whish is located in the occident from Venezuela. Developed according the official methodology of urban analysis established for the national urban authorities, the planning support system incorporates different technical for the automated processing of information in innovative way, to obtaining each one of the products that constitute the urban plan. Such system bases on a model of integral management and structured control of cartographic and document information, databases, images and animations, respect to information fields so different as routes networks, census segments, building inventories, and tourist videos. For it, a CAD system was combined with analysis and information presentation tools, elaborated through GIS, word processors, image processors, spreadsheet, database systems, presentation programs and hypertext interfaces, under the administration of a local network area.
series	plCAD
last changed	1999/04/08 17:16

_id	ddss9852
id	ddss9852
authors	Shalaby, Tarek, Scutt, Tom and Palmer, Diane
year	1998
title	The ‘Intelligent Map’ as A Decision Support System for UrbanPlanners in Nottingham Using GIS Technology
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Location is often considered as the most important factor leading to the success of public or private services. Location is the key in maximising accessibility and keeping operating cost low. A collaborative research project between ‘Nottingham University’ and the ‘Environmental ServicesDepartment of Nottingham City Council’ is developing an ‘Intelligent Map’ for identifying optimum locations for the recycling centres in the city. The object is to develop a new decision support system for urban planners, to be used as a management and analytical tool for improving locational decisionmaking. This paper discusses the technique of the Intelligent Map, and its concept. The paper includes three main sections. The first discusses the introduction of the mini-recycling centres in Nottingham, theproblems associated with their spatial distribution, and the need for a new decision support system using GIS technology. The second examines traditional techniques using GIS for identifying optimum locations and calculating catchment areas. The third explains the concept of the Intelligent Map; discussion takes the form of an initial analysis of the likely method to be applied, and then briefly outlines some of the prototyping work that is currently taking place at Nottingham.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9851
id	ddss9851
authors	Torre, Carmelo and Selicato, Francesco
year	1998
title	Consequences of Interdisciplinary Approaches in the Construction ofKnowledge-Bases
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The character of interdisciplinarity in planning approaches create a new, intriguing, emerging complexity (Funtowitcz and Ravetz, 1994) in problems and in knowledge-structuring of contexts of planning practices. The key-role played by information systems (IS) implicates a re-consideration ofcharacter of knowledge to be used in knowledge-bases. The necessity of considering knowledge domains coming from social, cultural, economical, technical, physical and naturalistic approaches means dealing with different scales of value, with non homogenous parameters. The necessity ofmanaging flexible knowledge rises on the fore as fundamental issue for future information system oriented to supporting decisions. Might information systems be useful in this interdisciplinary approach ? It is necessary to contain in a knowledge-base both quantitative and qualitativeinformation ? Three alternatives are available for a conceptual discussion :the possibility of identify new approaches, in order to develop information systems able in managing new knowledge; the necessity of adding new support systems oriented to manage soft knowledge, to traditionalgeographic information systems (GIS); the possibility of non using support systems coming from a technological vision of problem for nontechnical knowledge (Latouche 1996). The first two paragraphs are due to F. Selicato. The third and the fourth paragraph are due to C. Torre.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9863
id	ddss9863
authors	Yaakup, A., Johar, F. and Yusof, I.M.
year	1998
title	Development Control System and GIS for Local Authority in Malaysia:A Case of Kuala Lumpur City Hall
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper examines the functions of local authority particularly in the context of planning and development control. The process of development control involves a technique for the systematic compilation of expert quantitative analysis and qualitative assessment of a project's land use and development viability, including its effect on the surrounding area, andthe presentation of results in a way which enables the importance of the predicted results, and the scope for modifying or mitigating them, to be properly evaluated by the relevant decision making body before a planning application decision is rendered. Taking Kuala Lumpur as an example this paper will demonstrate the development of database and its application for development and building control. The application indicates that thefunctionality of GIS can be enhanced, i.e. by adding new model and analytical tools to existing systems and by using the GIS toolkit to best effect. Consequently it will be used to assist decision-making, taking into account among other things, the current scenarios of the proposed development, physical constraint and future impacts.
series	DDSS
last changed	2003/08/07 16:36

_id	624d
authors	Coors, V. and Wiedmann, B.
year	1998
title	Using Wearable GIS in outdoor applications
source	Proceedings of the Symposium on Interactive Applications for Mobile Computing, IMC’98, Rostock, Germany, November 1998
summary	Geographic Information Systems (GIS) are tools for acquiring, managing, analyzing, and presenting spatially related information. GIS represent parts of our world by digital maps or images. They facilitate the access to multimedial data using criteria such as geographic location or spatial proximity. Today, GIS are being used in all areas where spatial data need to be managed and analyzed. Three major application areas of GIS technology are - public administration, where GIS are used to generate and update spatially related data, - planning, where GIS support spatial decisions, e. g. in urban and regional planning, - research, where GIS help to analyze and describe spatial processes, e.g. in electoral research and environmental management.
series	other
last changed	2003/04/23 15:50

_id	29
authors	Nozica, G., Grizas, E. and Potenzoni, A.
year	1998
title	Diagnostico del Patrimonio Cultural Ambiental Urbano de un ¡rea de la Ciudad de San Juan Usando la Tecnologia Sig (Diagnostico of the Urban Cultural Patrimony in an area of the City of San Juan Using SGI Tecnology)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 226-231
summary	This paper includes some of the results obtained by "The Assessment of San Juan City Environmental Cultural Heritage - A methodology development based on G.I.S. technology" project team. Various criteria and methodologies used for an urban sector diagnosis are analysed based on D.F. Sarmiento Native Home National Historical Monument. Although the above mentioned GIS technology was applied together with the data base generated by the SICAT (Survey Data System), it was necessary to incorporate other data which were not considered by such a base. Consequently, a new system called Heritage Data System (HDS) was designed. The methodological contribution improved the GIS quality of detecting multiple relations among the sector under study cultural goods, such as: eleven environmental historical elements, two designated national historical monuments, one designated national historical site, historical buildings, urban districts, trees and facilities and allowed to define what was called "The Protected Environmental Historical Area".
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	ecaade03_373_117_wittkopf
id	ecaade03_373_117_wittkopf
authors	Wittkopf, Stephen K. and Foo, E-Jin
year	2003
title	Discussing Image-Based Modeling Technology for 3D Digital Archival of Physical Architecture Models
source	Digital Design [21th eCAADe Conference Proceedings / ISBN 0-9541183-1-6] Graz (Austria) 17-20 September 2003, pp. 373-380
doi	https://doi.org/10.52842/conf.ecaade.2003.373
summary	Besides drawings, physical models are important forms of representation commonly used for architectural design. They can serve as a useful resource for teaching and research, provided there is a proper archiving system that allows easy retrieval. Architectural models in 3D digital format seem to be able to overcome the limitation of physical constraints – they can be easily accessed anytime and anywhere over the Internet. The most common way of 3D model documentation is through geometric-based 3D CAD software. Image-based modeling (IM) allows the 3D digital model to be created from photographic images. Debevec (1998) investigated the hybrid geometry- and image-based approach whilst Tsou (2002) and Hawkins (2001) focused on the application of IM for GIS and digitizing cultural artifacts respectively. This paper aims to compare physical models and their IM counterparts in terms of communication of vital architectural information. Experiments were conducted to evaluate the extent the IM model resembled the physical predecessor in terms of its geometry and visual appearance qualities/faithfulness. A survey was subsequently carried out to compare their performance in terms of the communication of vital architectural information about building designs to the observers. The tabulated results were then examined to help understand the opportunities and weakness of IM for 3D archival of physical architecture models
keywords	Image-based modeling, architecture model, digital archiving, design resource
series	eCAADe
email
more	http://www.arch.nus.edu.sg/akiskw
last changed	2022/06/07 07:57

_id	ddss9801
id	ddss9801
authors	Achten, Henri and Leeuwen, Jos van
year	1998
title	A Feature-Based Description Technique for Design Processes: A Case Study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series	DDSS
last changed	2003/11/21 15:15

_id	ddss9802
id	ddss9802
authors	Akin, O., Aygen, Z., Cumming, M., Donia, M., Sen, R. and Zhang, Y.
year	1998
title	Computational Specification of Building Requirements in theEarly Stages of Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	We have been exploring computational techniques to help building designers to specify design requirements during the early stages of design. In the past, little has been accomplished in this area either in terms of innovative computational technologies or the improvement of design performance.The prospect of improving design productivity and creating a seamless process between requirements specification and formal design are our primary motivations. This research has been conducted as partof a larger project entitled SEED (Software Environment to Support Early Phases in Building Design). SEED features an open-ended modular architecture, where each module provides support for a design activity that takes place in early design stages. Each module is supported by a database to store and retrieve information, as well as a user interface to support the interaction with designers. The module described in this paper, SEED-Pro (the architectural programming module of SEED), is a workingprototype for building design requirements specification. It can be used by other modules in SEED or by design systems in other domains, such as mechanical engineering, civil engineering, industrial designand electrical engineering. Our approach to SEED-Pro is divided into two phases: core, and support functionalities. The core functionalities operate in an interactive mode relying on a case-based approach to retrieve and adapt complex specification records to the problem at hand. The supportfunctionalities include the case-base, the data-base, and the standards processing environment for building specification tasks. Our findings indicate that SEED-Pro: (1) is a tool that structures the unstructured domain of design requirements; (2) enables the integration of design requirements with the rest of the design process, (3) leads to the creation of complex case-bases and (4) enables the observation of their performance in the context of real world design problems.
series	DDSS
last changed	2003/11/21 15:15

_id	ddssar0203
id	ddssar0203
authors	Alkass, Sabah and Jrade, Ahmad
year	2002
title	A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source	Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary	Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series	DDSS
last changed	2003/11/21 15:15

_id	ddss9804
id	ddss9804
authors	Assaf, S.
year	1998
title	A Decision Support System (DSS) for Forward Housing Planning
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper presents a specification of a Local Housing Strategy Decision Support System (LHS-DSS) (Conceptual and Physical model design). Emphasis throughout the design process is laid on the techniques that provide housing planners with accurate rapid assistance during the preparation process of local housing strategy. Relevant knowledge (descriptive, procedural, reasoning) and data about each step of the process, options for each situation as it arises, and a record of decisions made with underlying reasons are provided to system users. Three main components are identified to shape up the LHS-DSS: the language system for addressing housing problems; knowledge system which is responsible for gathering and accumulating the housing knowledge required; and problem processing system (an inquiry system) which produces suitable and effective recommendations to support the strategy preparation process.
series	DDSS
last changed	2003/11/21 15:16

For more results click below: