Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 537

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9859
id	ddss9859
authors	Tonarelli, P., Delaporte, J.L., Tahon, C.
year	1998
title	Geographical and logistical Information System for building management
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Nowadays, most of building managers (e.g., companies, local communities, government agencies) have to face up a common set of problems. For instance, these problems are a deficient knowledge of ancient buildings and networks (e.g., gas, water), an inefficient management of green spaces, ora lack of communication between users (e.g., technical staff, suppliers, building end users). In addition, building and spaces to be managed may be shared among several distant areas. LAMIH works aim to achieve methodologies and computer tools for building management andassociated logistic. These works include two aspects we present in this paper:- a methodological one: the establishment of a project business plan, applied to building and logistic management,- a computer aspect: the design and implementation of a decision and management support system, the Geographical and Logistical Information System (G.L.I.S.). The project business plan includes the creation of a task force which has to lead the project and the description of the project plan.The G.L.I.S. is a software set which uses shared database. In particular, this set allows the different users to:- manage a patrimony as a whole, with the help of a Geographical Information System,- manage buildings and networks,- improve communication and logistic aspects with the help of a groupware tool. We present the achievement of these methodology and tools as part of a particular area: theUniversity of Valenciennes which is shared among four towns. The project takes into account existing buildings and those to be built, spaces which separates them, and the relationships betweenthe four different sites of the University. A task force is created as well as a specialised service, the Building Management Department. This department represents an interface between the task force,the LAMIH, and a centre of Information Technologies in construction (CERTIC) which is created as part of the SCENIC project (Support Centres Network for IT in Construction, Esprit project 21772).
series	DDSS
last changed	2003/08/07 16:36

_id	ga9811
id	ga9811
authors	Feuerstein, Penny L.
year	1998
title	Collage, Technology, and Creative Process
source	International Conference on Generative Art
summary	Since the turn of the twentieth century artists have been using collage to suggest new realities and changing concepts of time. Appropriation and simulation can be found in the earliest recycled scraps in Cubist collages. Picasso and Braque liberated the art world with cubism, which integrated all planes and surfaces of the artists' subjects and combined them into a new, radical form. The computer is a natural extension of their work on collage. The identifying characteristics of the computer are integration, simultaneity and evolution which are inherent in collage. Further, the computer is about "converting information". There is something very facinating about scanning an object into the computer, creating a texture brush and drawing with the object's texture. It is as if the computer not only integrates information but different levels of awareness as well. In the act of converting the object from atoms to bits the object is portrayed at the same conscious level as the spiritual act of drawing. The speed and malleability of transforming an image on the computer can be compared to the speed and malleability of thought processes of the mind. David Salle said, "one of the impulses in new art is the desire to be a mutant, whether it involves artificial intelligence, gender or robotic parts. It is about the desire to get outside the self and the desire to trandscend one's place." I use the computer to transcend, to work in different levels of awareness at the same time - the spiritual and the physical. In the creative process of working with computer, many new images are generated from previous ones. An image can be processed in unlimited ways without degradation of information. There is no concept of original and copy. The computer alters the image and changes it back to its original in seconds. Each image is not a fixed object in time, but the result of dynamic aspects which are acquired from previous works and each new moment. In this way, using the computer to assist the mind in the creative processes of making art mirrors the changing concepts of time, space, and reality that have evolved as the twentieth century has progressed. Nineteenth-century concepts of the monolithic truth have been replaced with dualism and pluralism. In other words, the objective world independent of the observer, that assumes the mind is separate from the body, has been replaced with the mind and body as inseparable, connected to the objective world through our perception and awareness. Marshall Mcluhan said, "All media as extensions of ourselves serve to provide new transforming vision and awareness." The computer can bring such complexities and at the same time be very calming because it can be ultrafocused, promoting a higher level of awareness where life can be experienced more vividly. Nicholas Negroponte pointed out that "we are passing into a post information age, often having an audience of just one." By using the computer to juxtapose disparate elements, I create an impossible coherence, a hodgepodge of imagery not wholly illusory. Interestingly, what separates the elements also joins them. Clement Greenberg states that "the collage medium has played a pivotal role in twentieth century painting and sculpture"(1) Perspective, developed by the renaissance archetect Alberti, echoed the optically perceived world as reality was replaced with Cubism. Cubism brought about the destruction of the illusionist means and effects that had characterized Western painting since the fifteenth century.(2) Clement Greenberg describes the way in which physical and spiritual realities are combined in cubist collages. "By pasting a piece of newspaper lettering to the canvas one called attention to the physical reality of the work of art and made that reality the same as the art."(3) Before I discuss some of the concepts that relate collage to working with computer, I would like to define some of the theories behind them. The French word collage means pasting, or gluing. Today the concept may include all forms of composite art and processes of photomontage and assemblage. In the Foreword on Katherine Hoffman's book on Collage Kim Levin writes: "This technique - which takes bits and pieces out of context to patch them into new contexts keeps changeng, adapting to various styles and concerns. And it's perfectly apt that interpretations of collage have varied according to the intellectual inquiries of the time. From our vantage point near the end of the century we can now begin to see that collage has all along carried postmodern genes."(4) Computer, on the other hand is not another medium. It is a visual tool that may be used in the creative process. Patrick D. Prince's views are," Computer art is not concrete. There is no artifact in digital art. The images exist in the computer's memory and can be viewed on a monitor: they are pure visual information."(5) In this way it relates more to conceptual art such as performance art. Timothy Binkley explains that,"I believe we will find the concept of the computer as a medium to be more misleading than useful. Computer art will be better understood and more readily accepted by a skeptical artworld if we acknowledge how different it is from traditional tools. The computer is an extension of the mind, not of the hand or eye,and ,unlike cinema or photography, it does not simply add a new medium to the artist's repertoire, based on a new technology.(6) Conceptual art marked a watershed between the progress of modern art and the pluralism of postmodernism(7) " Once the art is comes out of the computer, it can take a variety of forms or be used with many different media. The artist does not have to write his/her own program to be creative with the computer. The work may have the thumbprint of a specific program, but the creative possibilities are up to the artist. Computer artist John Pearson feels that,"One cannot overlook the fact that no matter how technically interesting the artwork is it has to withstand analysis. Only the creative imagination of the artist, cultivated from a solid conceptual base and tempered by a sophisticsated visual sensitivity, can develop and resolve the problems of art."(8) The artist has to be even more focused and selective by using the computer in the creative process because of the multitude of options it creates and its generative qualities.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddss9828
id	ddss9828
authors	Holmberg, Stig C.
year	1998
title	Anticipation in Evaluation and Assessment of Urban and Regional Plans
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to start a move toward better computer based supporting tools for the assessment of urban and regional plans, a new research and development endeavour is proposed. In so doing, anticipation andanticipatory computing, i.e. a technique applying modelling and simulation, is found to be an interesting and promising point of departure. Hence, a fuzzy cellular automata computer model (STF) for simulation and anticipation of geographical or physical space is constructed. The main idea is to map anurban plan onto the STF for its assessing. STF has a normalised and continuous, i.e. fuzzy, system variable while both the time and space dimensions take on discrete values. Further, while ordinary cellularautomata use local rules, global ones are employed in STF, i.e. there is a total interdependence among all the cells of the automata. Outcomes of STF can be interpreted more as possible future states than exact predictions. Preliminary results seem to be well in line with main characteristics of planned urban or regional geographical spaces. Further, for the managing of multi-criteria choice situations, a fuzzy procedure – the Ordered Weighted Average (OWA) procedure – with continuous control over the degree of ANDOR-ness and with independent control over the degree of tradeoff, is proposed.
keywords	Geographical space, Anticipatory Computing, Cellular Automata, Spatio Temporal Fuzzy Model (STF)
series	DDSS
last changed	2003/08/07 16:36

_id	6db8
authors	Iki, K., Shimoda, S., Miyazaki, T. and Homma, R.
year	1998
title	On the Development and the Use of Network Based Cafm System
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 253-260
doi	https://doi.org/10.52842/conf.caadria.1998.253
summary	The purpose of this study to develop a prototype of the network based and distributed database integrated CAFM (Computer Aided Facility Management) system for spatial analysis and space planning of office building. This system developed for the FM (Facility Management) works of large company that owns many office buildings in wide spread area. This system has following characteristic capabilities; 1) data acquisition from distributed database 2) benchmark comparison among in-house offices, particular office and several outside office standards 3) analysis of POE database and spatial condition database 4) evaluation of space planning by using CAD database and POE database This paper reports these four points. 1) conceptual and functional frame work of the system 2) technical arrangement of the system development 3) case study of the system use in a FM works on spatial analysis and space planning 4) evaluation of the system
keywords	CAFM, POE, Windows, Network
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:49

_id	f299
authors	Martens, Bob and Peter, Herbert
year	2002
title	Developing Systematics Regarding Virtual Reconstruction of Synagogues
source	Thresholds - Design, Research, Education and Practice, in the Space Between the Physical and the Virtual [Proceedings of the 2002 Annual Conference of the Association for Computer Aided Design In Architecture / ISBN 1-880250-11-X] Pomona (California) 24-27 October 2002, pp. 349-356
doi	https://doi.org/10.52842/conf.acadia.2002.349
summary	Computer-assisted reconstruction of no-longer existent (architectural) objects and their surroundingsamounts to a “virtual comeback”. Irreversible destruction having removed identity-establishing buildingsfrom the urban surface forever is the principal reason for re-creating them by imagination. Following thedestruction during the so-called “Reichskristall-Night” of November 1938, the synagogues of the Jewishcommunity in Vienna will only survive by means of virtual reconstruction. Sixty years later, in the commemorativeyear of 1998, the first synagogue reconstruction was initiated. The medium-range goal,however, aims at the reconstruction of at least ten additional synagogues as a project to be carried outin stages over a period of several years. Changes in personnel also call for a structure to be trackeddown later on. This paper deals with handling of modeling in a systematic manner, taking intoconsideration personnel changes,aiming at a traceable data structure for subsequent use and follow-upwork.
series	ACADIA
email
last changed	2022/06/07 07:59

_id	650c
authors	Porada, S.
year	1998
title	Ouvoir - Of the Potential Architecture
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 155-161
summary	Calculations are used to forecast urban flows of population, development of various activities, demography, and many other architectural programme constrains, and have been spontaneously the first field of computer intervention in urban and architectural project design. By analogy to engineering where computation is the base of decision making, architectural design process is seen as a problem solving process. <> constrains computer aided computation is seen as Computer Aided Architectural Design, CAAD. This way, a technological utopia called CAD in architecture is born. Nevertheless, the review of architectural design methods has clearly shown that programmatic models, since they are only used to evaluate spatial hypothesis, and do not have in themselves space production potentialities. In spite of the powerful methodological movement of the sixties, that have established this design constellation, the misunderstanding persists until now. Architect is a gestural and visual being. By using simultaneously metaphor, gesture and calculation, he calls for all his experiences and sensibility to realise plastic and poetic synthesis of form. To remedy to the major problem of the form synthesis, graphical instruments have been proposed. Why not utilise tools used in the field of engineering as computer aided drafting ? And so, computer aided drafting triumphaly entered the architectural design process. But, computer aided drafting is commonly seen as an instrument used on the - projection - stage, where drawings are produced for an already designed object. A new myth that assimilate architectural design to the drawing production activity arrives with the <>, containing thousands of drawings. All this aimed to facilitate, as it is proclaimed, communication between all the intervening in the project.
series	plCAD
last changed	1999/04/08 17:16

_id	ddss9801
id	ddss9801
authors	Achten, Henri and Leeuwen, Jos van
year	1998
title	A Feature-Based Description Technique for Design Processes: A Case Study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series	DDSS
last changed	2003/11/21 15:15

_id	0374
authors	De Vecchi, Antonio and Navarra, Laura
year	1998
title	Verification of Building Assemblage Compatability
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 234-238
doi	https://doi.org/10.52842/conf.ecaade.1998.234
summary	A computer program is being elaborated as an aid in designing assembled parts whose assembly presents high degrees of complexity. The newly created program, once incorporated in the CAD sector to increase its potential applications, will facilitate the analysis of reciprocal relationhips between pieces of the assemblage; this will enhance optimum decision-making in terms of geometric and functional characteristics with respect to the previously conceived assembly sequence. The program will automatically create images in three different ways: instantaneous images of assembly stages for each piece of the assembled part; exploded axonometric view of the whole structure with indications of necessary procedures for inserting or connecting the assembled part;sequenced procedures for connecting the assembled part. The different methods of visualization listed above will allow for project verification of the part by means of simultaneous visual analysis of the images and rapid updating should any changes in their properties arise. These types of visualization include simulations of piece by piece assemblage, which will facilitate an "optimal assemblage", meaning a set of components which are assembled in a specific sequence according to their "structural compatibility" and taking into consideration "particular assembly requirements".
series	eCAADe
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/28de_vecchi/index.htm
last changed	2022/06/07 07:55

_id	36
authors	González, Carlos Guillermo
year	1998
title	Una TecnologÌa Digital Para el Diseño: El Tde-Ac (A Digital Technology for Design: The Tde-Ac)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 274-279
summary	TDE is a graphic language capable of notation of pure design operations, which offers an alternative to Monge and Perspective drawing. This language which was perfected and developed by Claudio Guerri in the late 80's, is originated in the Theory of Spatial Delimitation of CÈsar Janello (1974-1984). From 1995 onwards, and within the framework of the UBACyT AR025 Project (1995-1997), a software in order to apply the TDE through computer technology started to be developed. This work is carried out within the framework of the research program SPATIAL SEMIOTICS-DESIGN THEORY of the FADU-UBA directed by Claudio Guerri, and is continued in the UBACyT AR01 4 Project (1998-2000) "TDE-AC. Graphic language. TDE computer assisted". The computer tool TDE-AC, adds to this graphic language the power of the processing speed and a certain autonomy of interpretation and execution of design operations, which enables to visualize results with a remarkable speed in relation with manual or intellectual work in front of the drawing table. Trough the amplified projection on the screens of the program the stage of development and effectivity of TDE-AC will be demonstrated.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	253a
authors	Snyder, James Daniel
year	1998
title	Conceptual modeling and application integration in CAD: the essential elements
source	Camegie Mellon University, School of Architecture, Pittsburgh
summary	A research focus in design research has been the exchange of information between different participants in the design process. While information system automation has occurred in various areas, known as islands of informafion, significant software integration has yet to emerge. A current belief among researchers in this area is that support for information sharing will require shared resources, and more specifically, shared descriptions of the information to be exchanged. If buildings are viewed as a product, the notion of a product and process modeling system ought to support the electronic exchange of information between various design process participants. While significant research has been done, no consensus has emerged as to a satisfactory solution to design information exchange. Many important contributions have been discovered, however, no overall strategy has emerged that embraces both the research issues as well as the practical issues surrounding information exchange. To address the above issues in a specific context, a series of experiments were conducted utilizing a prototype modeling framework that supports product modeling via the Object Model Language (Om). The results of these experiments along with a literature survey allowed for a comprehensive set of product/process modeling requirements. The resulting requirements were then formalized into a product /process modeling environment that includes a modeling language called SPROUT (supported by a compiler) and an associated software architecture that can be targeted toward many different hardware and software platforms. A particularly unique capability supported in this environment is formal support for integrating existing software systems. Given a schematic description in SPROUT, a formal specification can be used to generate computer programs that provably map data to and from the application program.
series	thesis:PhD
last changed	2003/02/12 22:37

_id	f448
authors	Hermann, M., Kohler, N., Koenig, H. and Luetzkendorf, T.
year	1998
title	CAAD System with Integrated Quantity Surveying, Energy Calculation, and LCA
source	Proceedings: Green Building Challenge 98, Vancouver, Canada. Vol. 2, 68 - 75
summary	In the framework of the German LEGOE project, an integrated tool is developed for computer aided architectural design (CAAD), quantity surveying (catalogue of building elements), life cycle cost calculation and estimation (construction and refurbishment), direct energy consumption (heating, hot-water, electri-city) and environmental impact assessment (mass flows and effect oriented evaluation). During the design process the architect works in his usual CAAD environment with building elements (e.g. one m2 of outer wall) which in turn are composed of detailed construction specifications, energy and mass flow coefficients and cost data. These elements are part of an independent catalogue of elements with all their relevant data. The different application programs use the same basic data and write the specific results into a project-specific database called a PDB which allows the comparison of these data to reference data from other projects. Evaluation and visualisation programs refer to the PDB only.
series	other
last changed	2003/04/23 15:50

_id	6672
authors	Af Klercker, Jonas
year	1998
title	A CAVE-Interface in CAAD-Education
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 110-115
doi	https://doi.org/10.52842/conf.ecaade.1998.110
summary	The so called "CAVE-interface" is a very interesting and thrilling development for architects! It supports a better illusion of space by exposing almost a 270° view of a computer model than the 60° which can be viewed on an ordinary computer screen. At the Lund University we have got the possibility to experiment with a CAVE-installation, using it in research and the education of CAAD. The technique and two experiments are discribed. The possibilities are discussed and some problems and questions are put forward.
series	eCAADe
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/31af_klercker/index.htm
last changed	2022/06/07 07:54

_id	6433
authors	Agranovich-Ponomarieva, E. and Litvinova, A.
year	1998
title	The "Real Space - Cyberspace" Paradigm
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 141-145
summary	In a chain of "real - perceived - imagined space" the computer reduces to a uniform model of only real and imagined space. It cannot undertake man's function or it cannot build the perception model. However, perception assumes physiological perception, psychological estimation and understanding, and emotional ho-experience. For a person the seizing of space during perception is constructing temporary spatial images and their development. The communicative relations of the person with environment are established during revealing internal and external structural communications and the interior represents the message, unwrapped in space and perceived in time. The real space is formed under influence of the sum of conceptual restrictions. The character of these restrictions depends on a super idea, a type of an initial situation, character of installations and on social-cultural stereotypes of the author. Without this stage transition to real architectural object is impossible. Result of activity of an architect at this stage becomes creation hypothetical cyberspace, with its own peculiarities and laws.
series	plCAD
last changed	1999/04/08 17:16

_id	ddss9803
id	ddss9803
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1998
title	Extending spatial DSS with spatial choice models of multipurpose shopping trip behaviour
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Spatial choice or interaction models have been widely used in spatial DSS or customised GIS for analysing the impacts of retail location plans. The models typically used, however, do not account for spatial agglomeration effects on spatial choice behaviour. This study develops a model system for analysing the impacts of retail plans based on a choice model of multipurpose behaviour developed in earlier work. The model system is implemented in the spatial DSS called Location Planner. An empirical study demonstrates the empirical estimation and use of the model for analysing the impacts of an expansion of floor space in the major shopping centre of a middle-sized city in The Netherlands. The results indicate that agglomeration effects as predicted by the model can have substantial impacts on the performance of retail systems. Therefore, it is argued that when incorporated in a spatial DSS, the more complex models have the potential to improve the use of these systems for impact analysis.
series	DDSS
last changed	2003/11/21 15:16

_id	2796
authors	Brown, Andy and Lee, Hwa, Ryong
year	1998
title	A Mental Space Model
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 27-42
summary	The architectural design process is often characterised a series of evolving ideas, and involving a cyclical process between design and visualisation. However, the nature of the internal representation still remains unclear. What is actually represented in a designers mental space and what drives and influences the mental design process? If we wish to programme a computer to mimic or work in tandem with the mental processes involved we need to make that representation and the associated cognitive processes explicit. The ways that designers form mental representations are so diverse, personal, and often transient that it is not easy to externalise and articulate them in explicit terms. In order to propose a mental model, we can take in a particular I psychological research approach; that of introspective observation from design drawing . In doing so, we posit an assumption that the designer's drawing can be seen as an extension of the internal mental feature, and hence internal representation could be inferred from the analysis of external representation - the drawing or sketch. This approach contrasts with the protocol analysis approach where mental operations are inferred from words, what could be termed thinking aloud.
series	plCAD
email
last changed	2003/05/17 10:01

_id	c11a
authors	Campbell, D.A.
year	1998
title	VRML In Architectural Construction Documents: A Case Study
source	VRML 98 Monterey - Proceedings of the 1998 VRML Conference, pp. 115-120
summary	The Virtual Reality Modeling Language (VRML) and the World Wide Web (WWW) offer new opportunities to communicate an architect's design intent throughout the design process. We have investigated the use of VRML in the production and communication of construction documents, the final phase of architectural building design. A prototype, experimental Web site was set up and used to disseminate design data as VRML models and HTML text to the design client, contractor, and fabricators. In this paper, we discuss the way our construction documents were developed in VRML, the issues we faced implementing it, and critical feedback from the users of the Web space/site. Finally, we suggest ways to enhance the VRML specification which would enable its widespread use as a communication tool in the design and construction industries. CR Categories and Subject Descriptors: 1.3.5 [Computer Graphics]: Computational Geometry and Object Modeling - Curve, surface, solid, and object representations; 1.3.7 [Computer Graphics]: Three-Dimensional Graphics and Realism - Virtual Reality; J-6. [Computer Applications]: Computer-aided Engineering - Computer-aided design (CAD), Computer-aided manufacturing (CAM). Additional Keywords: architecture, construction, AEC, design, construction documentation, specifications, Internet, extranet, World Wide Web, VRML, virtual worlds, virtual environments
series	other
email
last changed	2003/04/23 15:50

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	fb22
authors	Chien, Sheng-Fen
year	1998
title	Supporting information navigation in generative design systems
source	Camegie Mellon University, School of Architecture
summary	Generative design systems make it easier for designers to generate and explore design altematives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed to enable designers to access the information with ease. Such aids may improve the usability of generative design systems and encourage their use in architectural practice. This dissertation presents a comprehensive approach to support navigation in generative design systems. This approach takes account of studies related to human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. It contains a general model of design space, basic navigation operations, and principles for designing navigation support. The design space model describes how the space may grow and evolve along predictable dimensions. The basic operations facilitate navigation activities in this multi-dimensional design space. The design principles aim at guiding system developers in creating navigation utilities tailored to the needs of individual design systems. This approach is validated through prototype implementations and limited pilot usability studies. The validity of the design space model and basic navigation operations is examined through the development of a design space navigation framework that encapsulates the model and operations in a software environment and provides the infrastructure and mechanisms for supporting navigation. Three prototype navigation tools are implemented using this framework. These tools are subjected to usability studies. The studies show that these tools are easy to leam and are efficient in assisting designers locating desired information. In summary, it can be demonstrated that through the prototype implementations and usability studies, this approach offers sufficient support for the design and implementation of navigation aids in a generative design system. The research effort is a pioneer study on navigation support in generative design systems. It demonstrates why navigation support is necessary; how to provide the support; and what types of user interaction it can offer. This research contributes to information navigation studies not only in the specific domain of generative design system research, but also in the general field of human-computer interaction.
series	thesis:PhD
email
last changed	2003/02/12 22:37

For more results click below: