Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 555

Reformat results as: short short into frame detailed detailed into frame

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	ga9921
id	ga9921
authors	Coates, P.S. and Hazarika, L.
year	1999
title	The use of genetic programming for applications in the field of spatial composition
source	International Conference on Generative Art
summary	Architectural design teaching using computers has been a preoccupation of CECA since 1991. All design tutors provide their students with a set of models and ways to form, and we have explored a set of approaches including cellular automata, genetic programming ,agent based modelling and shape grammars as additional tools with which to explore architectural ( and architectonic) ideas.This paper discusses the use of genetic programming (G.P.) for applications in the field of spatial composition. CECA has been developing the use of Genetic Programming for some time ( see references ) and has covered the evolution of L-Systems production rules( coates 1997, 1999b), and the evolution of generative grammars of form (Coates 1998 1999a). The G.P. was used to generate three-dimensional spatial forms from a set of geometrical structures .The approach uses genetic programming with a Genetic Library (G.Lib) .G.P. provides a way to genetically breed a computer program to solve a problem.G. Lib. enables genetic programming to define potentially useful subroutines dynamically during a run .* Exploring a shape grammar consisting of simple solid primitives and transformations. * Applying a simple fitness function to the solid breeding G.P.* Exploring a shape grammar of composite surface objects. * Developing grammarsfor existing buildings, and creating hybrids. * Exploring the shape grammar of abuilding within a G.P.We will report on new work using a range of different morphologies ( boolean operations, surface operations and grammars of style ) and describe the use of objective functions ( natural selection) and the "eyeball test" ( artificial selection) as ways of controlling and exploring the design spaces thus defined.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	aac0
authors	Garcia, Renato
year	1998
title	Structural Feel or Feelings for Structure? - Stirring Emotions through the Computer Interface in Behaviour Analysis of Building Structures
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 163-171
doi	https://doi.org/10.52842/conf.caadria.1998.163
summary	The use of computers in the analysis of architectural structures has at present become indispensable and fairly routine. Researchers & professionals in architecture and engineering have taken advantage of current computer technology to develop richer and more comprehensive interactive interfaces in systems designed to analyse structural behaviour. This paper discusses a research project which attempts to further enrich such computer interfaces by embodying emotion or mood (affective) components into them and assessing the effects of incorporating these into multimodal learning modules for students of architecture at the University of Hong Kong. Computer structural analysis is most often used to determine the final state of a structure after full loading, but can also be used very ably to depict the time-history behaviour of a structure. The time-dependent nature of this process of behaviour provides an excellent opportunity to incorporate emotion cues for added emphasis and reinforcement. Studying time-history behaviour of structures is a vital part of classroom learning in structures and this why such emotion cues can have significant impact in such an environment. This is in contrast to the confines of professional engineering practices where these cues may not be as useful or desirable because oftentimes intermediate time history data is bypassed as a blackbox and focus is placed primarily on bottomline analysis results. The paper will discuss the fundamental basis for the establishment of emotional cues in this project as well as it's implementation-which consists mainly of two parts. The first involves 'personifying' the structure by putting in place a structure monitoring system analogous to human vital signs. The second involves setting up a 'ladder' of emotion states (which vary from feelings of serenity to those of extreme anxiety) mapped to the various states of a structures stability or condition. The paper will further elaborate on how this is achieved through the use of percussion, musical motifs, and chord progression in resonance with relevant graphical animations. Initially in this project, emotion cues were used to reinforce two structural behaviour tutoring systems developed by this author (3D Catenary Stuctures module & Plastic Behaviour of Semi-rigid Steel Frames module). These modules were ideal for implementing these cues because both depicted nonlinear structural behaviour in a mainly time-history oriented presentation. A brief demonstration of the actual learning modules used in the project study will also be presented together with a discussion of the assessment of it's effectiveness in actual classroom teaching.
keywords	Affective Interfaces, Human-Computer Interaction, Computer-Aided-Engineering
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:50

_id	4942
authors	Gardner, Brian M.
year	1998
title	The Grid Sketcher: An AutoCAD Based Tool for Conceptual Design Processes
source	Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 222-237
doi	https://doi.org/10.52842/conf.acadia.1998.222
summary	Sketching with pencil and paper is reminiscent of the varied, rich, and loosely defined formal processes associated with conceptual design. Architects actively engage such creative paradigms in their exploration and development of conceptual design solutions. The Grid Sketcher, as a conceptual sketching tool, presents one possible computer implementation for enhancing and supporting these processes. It effectively demonstrates the facility with which current technology and the computing environment can enhance and simulate sketching intents and expectations. One pervasive and troubling undercurrent, however, is the conceptual barrier between the variable processes of human thought and those indigenous to computing. Typically with respect to design, the position taken is that the two are virtually void of any fundamental commonality. A designer’s thoughts are intuitive, at times irrational, and rarely follow consistently identifiable patterns. Conversely, computing requires predictability in just these endeavors. Computing is strictly an algorithmic process while thought is not always so predictable. Given these dichotomous relationships, the computing environment, as commonly defined, cannot reasonably expect to mimic the typically human domain of creative design. In this context, this thesis accentuates the computer’s role as a form generator as opposed to a form evaluator. The computer, under the influence of certain contextual parameters can, however, provide the designer with a rich and elegant set of forms that respond through algorithmics to the designer’s creative intents. The software presented in this thesis is written in AutoLISP and exploits AutoCAD’s capacious 3D environment. Designs and productions respond to a bounded framework where user selected parametric variables of size, scale, proportion, and proximity, all which reflect contextual issues, determine the characteristics of a unit form. Designer selected growth algorithms then arbitrate the spatial relationships between the unit forms and their propagation through the developing design. While the Sketcher implements only the GRID as an organizational discipline, many other paradigms are possible. Within this grid structure a robust set of editing features, supported by the computer’s inherent speed, allows the designer to analyze successive productions while refining ever more complex solutions. Through creative manipulation of these algorithmic structures ideas eventually coalesce to formalize images that represent a given design problem’s solution set.
series	ACADIA
email
last changed	2022/06/07 07:51

_id	074a
authors	Gross, M.D., Do, E.Y., McCall, R.J., Citrin, W.V., Hamill, P., Warmack, A. and Kuczun, K.S.
year	1998
title	Collaboration and coordination in architectural design: approaches to computer mediated team work
source	Automation in Construction 7 (6) (1998) pp. 465-473
summary	The paper reports on three projects at our laboratory that deal respectively with synchronous collaborative design, asynchronous collaborative design, and design coordination. The Electronic Cocktail Napkin and its mobile extension that runs on hand-held computers supports synchronous design with shared freehand drawing environments. The PHIDIAS hypermedia system supports long-term, asynchronous collaboration by enabling designers of large complex artifacts to store and retrieve rationale about design decisions and the Construction Kit Builder (CKB) supports team design by supporting a priori agreements among team members to avoid conflicts.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:22

_id	15
authors	Kensek, Karen
year	1998
title	Reconstruccion Digital de Arquitectura: Un Metodo de EnseÒanza en Modelaje, Rendering, y Animacion (Digital Reconstruction of Architecture: A Method of Training in Modelling, Rendering and Animation)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 132-139
summary	Throughout time, scholars have been resurrecting the architecture of past ages, Sir Arthur Evans with the Palace of Knossos in Crete, Heinrich Schliemann with the ruins of Troy, and Thor Hyerdahl with the Kontiki and Ra ship reconstructions. Digital reconstruction provides a powerful means to portray architecture and environments that no longer exist; structures that exist in a decayed form can be restored to an appearance of their former condition; and artist's visions that never existed can be reinterpreted in three-dimensions. These types of projects are highly suitable for teaching students, especially in advanced classes, how to use computer graphics for modeling, rendering, and animation. It is often difficult to gather accurate geometric and texture data and the information that is available is often ambiguous or even contradictory. The ambiguity of the information forces the students to truly study and attempt to comprehend what they are trying to model. Indeed, working with incomplete and contradictory graphical information is a normal part of architectural practice that one often has to deal with in the early stages of design
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	489a
authors	Matthews, K., Duff, S. and Corner, D.
year	1998
title	A Model for Integrated Spatial and Structural Design of Buildings
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 123-132
doi	https://doi.org/10.52842/conf.caadria.1998.123
summary	Recent advances in computer graphics and 3D user interfaces have enabled the emergence of 3D sketch modeling as a viable approach to architectural design, especially in the early schematic phase. This paper describes how a system can be built and used which integrates the capabilities of a good structural analysis system in the user-friendly working environment of a design-oriented modeling program. The structure of a building model as seen by finite element algorithms is a schematic idealization of the building's physical structure into nodes, elements, internal releases, boundary conditions, and loads. The more familiar architectural model used for design visualization represents spatial elements such as roofs, floors, walls, and windows. Rather than treat these models independently, the structural model can be defined in relation to the architectural as a virtual model with inherited common characteristics and additional relational and attribute information, using feature-based geometry data structures to organize topological intelligence in the spatial model. This provides the basis for synchronous modification of structural and architectural aspects of the design.
keywords	Structural Design, Spatial Design, Design Integration, Human-Computer Interaction, Feature-Based Modeling, Finite Element Analysis, Geometric Inference
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:58

_id	446f
authors	Mcintyre, B. and Feiner, S.
year	1998
title	A Distributed 3D Graphics Library
source	SIGGRAPH 98 Conference Proceedings, Computer Graphics Proceedings, Annual Conference Series, 1998, ACM SIGGRAPH
summary	We present Repo-3D, a general-purpose, object-oriented library for developing distributed, interactive 3D graphics applications across a range of heterogeneous workstations. Repo-3D is designed to make it easy for programmers to rapidly build prototypes using a familiar multi-threaded, object-oriented programming paradigm. All data sharing of both graphical and non-graphical data is done via general-purpose remote and replicated objects, presenting the illusion of a single distributed shared memory. Graphical objects are directly distributed, circumventing the "duplicate database" problem and allowing programmers to focus on the application details. Repo-3D is embedded in Repo, an interpreted, lexically-scoped, distributed programming language, allowing entire applications to be rapidly prototyped. We discuss Repo-3D's design, and introduce the notion of local variations to the graphical objects, which allow local changes to be applied to shared graphical structures. Local variations are needed to support transient local changes, such as highlighting, and responsive local editing operations. Finally, we discuss how our approach could be applied using other programming languages, such as Java.
series	other
last changed	2003/04/23 15:50

_id	bf8f
authors	Novitszki, B.J.
year	1998
title	Rendering Real and Imagined Buildings: The Art of Computer Modeling from the Palace of Kublai Khan to Le Corbusier‘s Villas
source	Gloucester, MA: Rockport Publishing
summary	Rendering Real and Imagined Buildings explores the world of buildings that were, that could have been or that are yet to be. Advances in architectural rendering programs on the computer can allow architects to explore unbuilt architecture, test structures, discover details, and see in 3-D what cannot be shown on paper. The book presents 27 buildings from an ancient temple to a house by Frank Lloyd Wright to an airport for the future.
series	other
email
last changed	2003/04/23 15:14

_id	40
authors	Prieto, Carlos and Serrentino, Roberto
year	1998
title	Configuraciones Urbanas Recursivas (Recursive Urban Configurations)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 300-309
summary	A method to develop skills using digital techniques in architectural and design fields is proposed. Recursive procedures in successive cycles of abstraction are used applied for the urban layout design process. Each configurational cycle (master plan, urban modules, buildings, habitational units) is separated and exaggerated to face the process with pedagogical goals. Urban factors that conform the city are identified in order to classify repetitive urban problems. A patch of the city, in which a master plan is developed, is isolated and is submitted the measurable tests related to the Architectural and Design projecting process, enfatizating the following aspects., its systemic structures, its geometry and its growing. Alometric concepts and growing form analogies are used as scale control method in transformations and in recursive cycles. Based in two potentially recursive theories, fractals and tessellation's theories, a pedagogic procedure oriented to the use of tessellations is proposed using CAD systems tools.
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	2557
authors	Reisig, W.
year	1998
title	Elements of Distributed Algorithms: Modeling and Analysis with Petri Nets
source	Springer Verlag, Berlin
summary	A variety of distributed algorithms are presented and proven correct in this book. A (Petri net based) technique to model and to analyze distributed algorithms is coincidently presented. This technique focusses on local states, independent actions, and synchronization of distributed threads of control. This book's scope is modest, as it sticks to a choice of small and medium size distributed algorithms. Compositionality, stepwise refinement, interface specification, abstraction, etc., are not covered. Nevertheless, this book's claims are ambitious: Just as PASCAL-like programming structures and Hoare-style proof techniques appear optimal for a wide class of sequential algorithms, this book's formalism is suggested to be optimal for a wide class of distributed algorithms. Particular preliminary knowledge is not assumed in this text, besides basics in formal concepts and a general intuitive understanding of computer science. The text provides a basis for university courses and can help the practitioner to design distributed algorithms. The hurried reader may just study the pictures.
series	other
last changed	2003/04/23 15:14

_id	ddss9846
id	ddss9846
authors	Rigatti, Decio
year	1998
title	Rubem Berta Housing Estate: Order and Structure, Designand Use
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The main goal of this paper is to investigate, through some space configurational based tools, a quite common phenomenon found in many different locations in Brazil, concerning the process of urban changes individually introduced by dwellers of public housing estates. A significant number of housing estates, particularly those designed according to rationalist concepts, seem to be unable to support space related social requirements and are then widely transformed when compared to the original layouts. Beyond the quantitative features, the morphological changes that take place in those housing estates mean a fundamental new approach to understand how completely new urban structures can arisefrom the space produced by a comprehensive urban design, took as a starting point for the transformations made by the dwellers of those settlements. As a case study is analysed the Rubem Berta Housing Estate which was built in Porto Alegre/RS, Brazil, for 20,000 people in the late 70’s. Since the begining of its occupation in 1986 and the invasion that took place in 1987, the urban transformations there have never stopped. It’s possible to realize that the dwellers individually use some constant physical rules to define the new settlement which are very similar within the estate itself and, at the same time, very similar to those found in other transformed housing estates of this sort. The physical rules introduced change the features of the entire settlement in two different levels: a) locally, through the transformations introduced in order to solve individual needs; b) globally, the local rules of physical transformations produce a new overall structure for the whole urban complex. The knowledge of this process makes it possible to bring to the surface of architectural theory some generic configurational codes that can be used as a tool for designing public housing estates in Brazil.
series	DDSS
last changed	2003/08/07 16:36

_id	53
authors	Vasquez de Velasco, Guillermo and Holland, Nancy
year	1998
title	Taller de Diseño Virtual Internacional y Educacion Reciproca a Distancia (International Virtual Design Studios and Reciprocal Distance Education)
source	II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 398-405
summary	Motivated by a tendency towards the development of international design and construction consortia, the paper explores the application of information technology in order to add an international and multicultural dimension to our Design Studios. In particular, the paper describes how a group of 4 Mexican design professors offers distance education to a Design Studio in the U.S. and how, in a reciprocal way, 4 American construction professors offer distance education to a Construction Studio in Mexico. Both groups of professors and students make extensive use of the Internet and a T1 dedicated line for compressed video. In addition to the experience previously mentioned, the paper elaborates on potential applications of the "Reciprocal Distance Education" model at university and professional levels. The paper presents conclusions that place particular attention in the evaluation of information resources. In the same way, some conclusions address the administrative an faculty structures that make possible the implementation of the model.
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	82dd
authors	Wang, Cheng-jui
year	1998
title	Shape Cognition in Design - Constructing a Cognitive Model of Shapes for Different Design Fields
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 347-354
doi	https://doi.org/10.52842/conf.caadria.1998.347
summary	The purpose of this paper is to reveal the characteristics of shape cognition of different design fields in the ‘intuitive design’ domain, and to construct a cognitive model of shape cognition for different design fields. The research procedure used in this study consisted of two phases. The first phase was applied to protocol analysis study of three professional designers in architectural design, industrial design and graphic design respectively. In the second phase, one controlled laboratory experiment was designed to reveal the characteristics of designers’ shape perception in different ‘intuitive design’ fields. By these empirical findings, we found that designer’s cognitive processes of shapes would be not alike in different design fields. The results suggest that in different design fields, designer’s shape cognition processes will be different, and in each design field, similar cognitive processes of shape contained different design meanings.
keywords	Design Process, Shape Cognition, Preferred Perception, Protocol Analysis
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:58

_id	d414
authors	Zalewski, Waclaw and Allen, Edward
year	1998
title	Shaping Structures
source	New York: John Wiley and Sons
summary	In Shaping Structures, an engineer and an architect, both longtime teachers of structures at major American universities, collaborate to present an inspired synthesis of the creative and the technical, explicating both the principles of statics and their application to the fascinating task of finding good form for structures. This richly visual volume features: * An easily understood development of the fundamentals of statics * Step-by-step demonstrations, using both numerical and graphical techniques, of simple yet powerful methods for finding form and forces for arched structures, suspended structures, cable-stayed structures, and highly efficient trusses * 120 photographs and more than 300 crisp drawings that illustrate and explain the magnificent structural triumphs of master architects and engineers -including Gustave Eiffel's famous tower, Robert Maillart's soaring bridges, Pier Luigi Nervi's landmark Turin Exhibition Hall, and many others * Calculations in both SI metric and conventional units throughout the book Requiring only the most rudimentary mathematical background yet accurate and fully functional, Shaping Structures provides an inviting point of entry to the study of structural design for engineering and architecture students -proving that the science of statics doesn't have to be lifeless, simplistic, or dull.
series	other
last changed	2003/04/23 15:14

_id	6433
authors	Agranovich-Ponomarieva, E. and Litvinova, A.
year	1998
title	The "Real Space - Cyberspace" Paradigm
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 141-145
summary	In a chain of "real - perceived - imagined space" the computer reduces to a uniform model of only real and imagined space. It cannot undertake man's function or it cannot build the perception model. However, perception assumes physiological perception, psychological estimation and understanding, and emotional ho-experience. For a person the seizing of space during perception is constructing temporary spatial images and their development. The communicative relations of the person with environment are established during revealing internal and external structural communications and the interior represents the message, unwrapped in space and perceived in time. The real space is formed under influence of the sum of conceptual restrictions. The character of these restrictions depends on a super idea, a type of an initial situation, character of installations and on social-cultural stereotypes of the author. Without this stage transition to real architectural object is impossible. Result of activity of an architect at this stage becomes creation hypothetical cyberspace, with its own peculiarities and laws.
series	plCAD
last changed	1999/04/08 17:16

_id	ddss9802
id	ddss9802
authors	Akin, O., Aygen, Z., Cumming, M., Donia, M., Sen, R. and Zhang, Y.
year	1998
title	Computational Specification of Building Requirements in theEarly Stages of Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	We have been exploring computational techniques to help building designers to specify design requirements during the early stages of design. In the past, little has been accomplished in this area either in terms of innovative computational technologies or the improvement of design performance.The prospect of improving design productivity and creating a seamless process between requirements specification and formal design are our primary motivations. This research has been conducted as partof a larger project entitled SEED (Software Environment to Support Early Phases in Building Design). SEED features an open-ended modular architecture, where each module provides support for a design activity that takes place in early design stages. Each module is supported by a database to store and retrieve information, as well as a user interface to support the interaction with designers. The module described in this paper, SEED-Pro (the architectural programming module of SEED), is a workingprototype for building design requirements specification. It can be used by other modules in SEED or by design systems in other domains, such as mechanical engineering, civil engineering, industrial designand electrical engineering. Our approach to SEED-Pro is divided into two phases: core, and support functionalities. The core functionalities operate in an interactive mode relying on a case-based approach to retrieve and adapt complex specification records to the problem at hand. The supportfunctionalities include the case-base, the data-base, and the standards processing environment for building specification tasks. Our findings indicate that SEED-Pro: (1) is a tool that structures the unstructured domain of design requirements; (2) enables the integration of design requirements with the rest of the design process, (3) leads to the creation of complex case-bases and (4) enables the observation of their performance in the context of real world design problems.
series	DDSS
last changed	2003/11/21 15:15

_id	ga9815
id	ga9815
authors	Annunziato, M.
year	1998
title	The Nagual Experiment
source	International Conference on Generative Art
summary	This paper refers to an experiment about the use of artificial life structures in order to simulate/evocate natural or artificial patterns. These patterns are the effect of the self-organisation of a population of individuals during their process of development and growth. Although the local dynamics and interactions have a chaotic (partially random) behaviour, the global dynamics of the population produces interesting and well structured patterns. The graphic images generated with these procedures show a wide variety of structures in terms of life (growth) simulations and graphic geometries.
series	other
email
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ascaad2006_paper19
id	ascaad2006_paper19
authors	Arjun, G. and J. Plume
year	2006
title	Collaborative Architectural Design as a reflective Conversation: an agent facilitated system to support collaborative conceptual design
source	Computing in Architecture / Re-Thinking the Discourse: The Second International Conference of the Arab Society for Computer Aided Architectural Design (ASCAAD 2006), 25-27 April 2006, Sharjah, United Arab Emirates
summary	In this paper, definitions of collaborative design are discussed and understood in terms of a designer’s cognitive collaborations to explore his/her experiential memory for remote idea associations. Based on Schon’s reflective practice theory, Valkenburg and Dorst’s (1998) description of collaborative team designing is adopted as a model for a proposed design conversation system. The design conversation system is aimed at triggering the experiential memory of the designer by associating significant ideas from different design domains to provide different perspectives of a design situation. The paper describes a proposed framework for the design conversation system incorporating computational agents in a blackboard architecture environment.
series	ASCAAD
email
last changed	2007/04/08 19:47

_id	0f4c
authors	Asanowicz, Aleksander
year	1998
title	From Real to Cyber Reality
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 11-19
summary	Human activity takes place in two planes, at two levels. Practical activity is present in one of the planes, the other level is occupied by purely cognitive activity. When observing sufficiently long sequences of practical and cognitive activities, one notices transitions between them, which prove true the suspicions of their functional relationship. Because on both of these planes of human activity there is always one and the same element present - an informative element - which on the first plane functions as subordinate, and in the other as an independent one, one can search for a common characteristic for both planes. Such common characteristic for both levels of human activity can be perceived in the fact that in both situations the activity of a human is based on CREATION. Human thinking is based on transitions between what is accessible through experience and what is referred to conceptually. The human thought exists only and exclusively in the vertical motion: from the phenomenal level to the structural level direction of abstraction) and from the conceptual level to the empirical level direction of concretisation). All human activity is multilayered or, more precisely, it is an activity within many layers: the sensual one as well as the structural one. The appearance of conceptual thinking has created a qualitatively new type of a situation. This novelty can be easily seen both in the sphere of the practical cognitive activity as well as in the sphere of the pure cognitive activity. In both cases, the cognitive activity of a human is of a "double-decker" character: image and concept. It is necessary to note here that the "image" does not only mean structural, concrete, but also one which is purely visual, abstract, of no physical form. Therefore, the human experience, being the result of the cognitive activity, is being expressed, becoming objective, materialising in two different but compatible ways. Firstly, in the material structures of practical significance - this way the material culture is created. Secondly - in material structures which have no practical meaning but are solely used for expressing the spiritual contents - thus creating the spiritual culture. Humans have developed an extraordinarily strong need for spiritual activity, which is manifested by the material activity, redundant from the point of view of the material needs.
series	plCAD
email
last changed	2003/05/17 10:01

For more results click below: