Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 542

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9811
id	ddss9811
authors	Barbanente, A., Conte, E. and Monno, V.
year	1998
title	Changing trends and approaches in human and computer modelling for social housing policies
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper discusses conceptual issues, goals and preliminary results of an on-going research which aims at building a Decision Support System for public housing environmental oriented maintenance and management in a city in Southern Italy, Bari. Traditional post-war Italian housing policies are compared with more recent approaches in the field, pointing out the change from quantitative, aggregated, more simple building problems and relatedapproaches to qualitative, differentiated, complex ones integrating social, economic and environmental dimensions with the aim of regenerating deteriorated residential areas. The paper claims for the need shift, both in the human and computer areas, from traditional quantitative models to new approaches able to manage also qualitative variables, temporal dynamics, emergencies, and intentionality, since they appear key aspects of the real world to be modelled. The housing estate of Bari and its needs of maintenance and management are examined, eliciting essential related knowledge using the interview technique. The clear orientation towards sustainable policies for urban regeneration, at a local, national, and Community level, is also considered. The innovative and collaborative nature of such policies and the attention to be paid to the social aspects ofthe problem require a complex DSS, integrating various kind of hypertexts, information systems and case-based fuzzy expert systems, whose main aims, functions, software and general organisation are outlined in the paper.
series	DDSS
last changed	2003/11/21 15:16

_id	1d83
authors	Dodge, M., Doyle, S. and Smith, A.
year	1998
title	Visual Communication in Urban Planning and Urban Design
source	Working Paper 2; Centre for Advanced Spatial Analysis Working Papers; London; June 1998
summary	This Case Study documents the current status of visual communication in urban design and planning. Visual communication is examined through discussion of standalone and network media, specifically concentrating on visualisation on the World Wide Web (WWW). First, we examine the use of Solid and Geometric Modelling for visualising urban planning and urban design. This report documents and compares examples of the use of Virtual Reality Modelling Language (VRML) and proprietary WWW based Virtual Reality modelling software. Examples include the modelling of Bath and Glasgow using both VRML 1.0 and 2.0. The use of Virtual Worlds and their role in visualising urban form within multi-user environments is reviewed. The use of Virtual Worlds is developed into a study of the possibilities and limitations of Virtual Internet Design Arena's (ViDA's), an initiative undertaken at the Centre for Advanced Spatial Analysis, University College London. The use of Virtual Worlds and their development towards ViDA's is seen as one of the most important developments in visual communication for urban planning and urban design since the development plan. Secondly, the role of photorealistic media in the process of communicating plans is examined. The process of creating photorealistic media is documented, and examples of the Virtual Streetscape and Wired Whitehall Virtual Urban Interface System are provided. The conclusion is that, although the use of photo-realistic media on the WWW provides a way to visually communicate planning information, its use is limited. The merging of photorealistic media and solid geometric modelling in the creation of Augmented Reality is reviewed. Augmented Reality is seen to provide an important step forward in the ability quickly and easily to visualise urban planning and urban design information. Third, the role of visual communication of planning data through GIS is examined in terms of desktop, three dimensional, and Internet based GIS. The evolution to Internet GIS is seen as a critical component in the development of virtual cities that will allow urban planners and urban designers to visualise and model the complexity of the built environment in networked virtual reality. Finally, a viewpoint is put forward of the Virtual City, linking Internet GIS with photorealistic multi-user Virtual Worlds. At present there are constraints on how far virtual cities can be developed, but a view is provided on how these networked virtual worlds are developing to aid visual communication in urban planning and urban design.
series	other
last changed	2003/04/23 15:50

_id	ddss9826
id	ddss9826
authors	Hendricx, A., Geebelen, B., Geeraerts, B. and Neuckermans, H.
year	1998
title	A methodological approach to object modelling in the architectural designprocess
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper describes a first prototype constructed in search for a central object model. It presents all possible data, concepts and operations concerning the architectural design process in the early phases.A central model of the process of design is essential: going from one design phase into another, the model describes geometrical shapes, abstract concepts like space and activity, concrete physical building elements and the basic operations all these entities undertake. Emphasis is put on combining all these different viewpoints, thus enabling the designer to use a broad range of design strategies. The aim is to help him and not steer or even hamper his creative process. Information necessary toassist the user of the system concerning energy calculation, stability checks etc can be extracted. By means of appropriate interfaces not only those tests built on top of the system but also existing software packages can make use of the model’s object structure. The implemented object model is one of the cornerstones of the IDEA+ project, aiming to provide an Integrated Design Environment for Architecture.
keywords	object model, building model, CAAD, IDEA+, MERODE
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9815
id	ddss9815
authors	Cutler, Lorraine M.
year	1998
title	Prototypical Laboratory Design to Support Learning and Teaching
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Collaboration between designers and scientists is an unusual combination to undertake the prototypical design of a teaching laboratory funded by Howard Hughes Medical Institute. The zoologists are developing a cooperative learning and interactive teaching pedagogy to make learningscience a process of critical inquiry and discovery. The industrial and interior designers are paying attention to the design issues of function and environmental support for teaching and doing the work required in a three-hour, hands-on beginning science learning space. Using both qualitative andquantitative research methods, the designers are able to determine a framework for making design decisions in prototypical beginning science environments. This framework is being developed as a guideline for designing similar environments at other institutions of higher learning. Videotape analysis precedes the research to uncover the underlying problems of the existing space and to formulate the questions for the research. Elements of a case study and an evaluative study integratewith the design process to form the basis of an intensive investigation of design issues for a beginning science teaching laboratory. Using two pretests as a baseline, the posttest data evaluates the success orfailure of the prototypical design. Both the pretests and the posttest evaluate the physical attributes of the old and new learning environment related to a beginning laboratory course in Zoology at Arizona State University.
series	DDSS
last changed	2003/08/07 16:36

_id	c65d
authors	Habraken, N.J. and Teicher, J (ed.)
year	1998
title	The Structure of the Ordinary
source	MIT Press, Cambridge, USA, pp. 73-76
summary	According to N. J. Habraken, intimate and unceasing interaction between people and the forms they inhabit uniquely defines built environment. The Structure of the Ordinary, the culmination of decades of environmental observation and design research, is a recognition and analysis of everyday environment as the wellspring of urban design and formal architecture. The author's central argument is that built environment is universally organized by the Orders of Form, Place, and Understanding. These three fundamental, interwoven principles correspond roughly to physical, biological, and social domains. Historically, "ordinary" environment was the background against which architects built the "extraordinary." Drawing upon extensive examples from archaeological and contemporary sites worldwide, the author illustrates profound recent shifts in the structure of everyday environment. One effect of these transformations, Habraken argues, has been the loss of implicit common understanding that previously enabled architects to formally enhance and innovate while still maintaining environmental coherence. Consequently, architects must now undertake a study of the ordinary as the fertile common ground in which form- and place-making are rooted. In focusing on built environment as an autonomous entity distinct from the societies and natural environments that jointly create it, this book lays the foundation for a new dialogue on methodology and pedagogy, in support of a more
series	other
last changed	2003/04/23 15:14

_id	avocaad_2001_09
id	avocaad_2001_09
authors	Yu-Tung Liu, Yung-Ching Yeh, Sheng-Cheng Shih
year	2001
title	Digital Architecture in CAD studio and Internet-based competition
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Architectural design has been changing because of the vast and creative use of computer in different ways. From the viewpoint of designing itself, computer has been used as drawing tools in the latter phase of design (Mitchell 1977; Coyne et al. 1990), presentation and simulation tools in the middle phase (Liu and Bai 2000), and even critical media which triggers creative thinking in the very early phase (Maher et al. 2000; Liu 1999; Won 1999). All the various roles that computer can play have been adopted in a number of professional design corporations and so-called computer-aided design (CAD) studio in schools worldwide (Kvan 1997, 2000; Cheng 1998). The processes and outcomes of design have been continuously developing to capture the movement of the computer age. However, from the viewpoint of social-cultural theories of architecture, the evolvement of design cannot be achieved solely by designers or design processes. Any new idea of design can be accepted socially, culturally and historically only under one condition: The design outcomes could be reviewed and appreciated by critics in the field at the time of its production (Csikszentmihalyi 1986, 1988; Schon and Wiggins 1992; Liu 2000). In other words, aspects of design production (by designers in different design processes) are as critical as those of design appreciation (by critics in different review processes) in the observation of the future trends of architecture.Nevertheless, in the field of architectural design with computer and Internet, that is, so-called computer-aided design computer-mediated design, or internet-based design, most existing studies pay more attentions to producing design in design processes as mentioned above. Relatively few studies focus on how critics act and how they interact with designers in the review processes. Therefore, this study intends to investigate some evolving phenomena of the interaction between design production and appreciation in the environment of computer and Internet.This paper takes a CAD studio and an Internet-based competition as examples. The CAD studio includes 7 master's students and 2 critics, all from the same countries. The Internet-based competition, held in year 2000, includes 206 designers from 43 counties and 26 critics from 11 countries. 3 students and the 2 critics in the CAD studio are the competition participating designers and critics respectively. The methodological steps are as follows: 1. A qualitative analysis: observation and interview of the 3 participants and 2 reviewers who join both the CAD studio and the competition. The 4 analytical criteria are the kinds of presenting media, the kinds of supportive media (such as verbal and gesture/facial data), stages of the review processes, and interaction between the designer and critics. The behavioral data are acquired by recording the design presentation and dialogue within 3 months. 2. A quantitative analysis: statistical analysis of the detailed reviewing data in the CAD studio and the competition. The four 4 analytical factors are the reviewing time, the number of reviewing of the same project, the comparison between different projects, and grades/comments. 3. Both the qualitative and quantitative data are cross analyzed and discussed, based on the theories of design thinking, design production/appreciation, and the appreciative system (Goodman 1978, 1984).The result of this study indicates that the interaction between design production and appreciation during the review processes could differ significantly. The review processes could be either linear or cyclic due to the influences from the kinds of media, the environmental discrepancies between studio and Internet, as well as cognitive thinking/memory capacity. The design production and appreciation seem to be more linear in CAD studio whereas more cyclic in the Internet environment. This distinction coincides with the complementary observations of designing as a linear process (Jones 1970; Simon 1981) or a cyclic movement (Schon and Wiggins 1992). Some phenomena during the two processes are also illustrated in detail in this paper.This study is merely a starting point of the research in design production and appreciation in the computer and network age. The future direction of investigation is to establish a theoretical model for the interaction between design production and appreciation based on current findings. The model is expected to conduct using revised protocol analysis and interviews. The other future research is to explore how design computing creativity emerge from the process of producing and appreciating.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9801
id	ddss9801
authors	Achten, Henri and Leeuwen, Jos van
year	1998
title	A Feature-Based Description Technique for Design Processes: A Case Study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series	DDSS
last changed	2003/11/21 15:15

_id	7436
authors	Barría Chateau, H., Muñoz Viveros, C. and Cerda Brintrup, G.
year	1999
title	Virtual Tour Through Modern Architecture in Conception
source	III Congreso Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings] Montevideo (Uruguay) September 29th - October 1st 1999, pp. 475-477
summary	This paper describes the development of a project that was selected and sponsoured by the Regional Competition FONDART 1998 (Funds for the Development of Arts of the Regional Secretary of Education) that follows the aim of cultural diffusion. Towards the middle of the 30s, the city of Concepción developed an architecture distinctly colonial, neoclassical and eclectic. An earthquake in 1939 abruptly interrupted this scene, destroying the enterity of its most important buildings. The reconstruction of the city followed the manifestoes of Modern Architecture, consolidating the urban importance of buildings such us the Law Courts, the Railway Station and the Regional Government, that emerged as the new architectural and cultural heritage of the city. The project consisted on the modeling of eleven buildings of the modern architectural heritage, and on the generation of 42 virtual tours through the buildings that were finally edited on a 16' video. This video allows the spectator to make a virtual tour through the original modern heritage of the city, nowadays demolished, altered, and sometimes, even forgotten. This project pretends to widen the ways of comprehension of our cultural identity by using computer modelling and animation as a tool for the conservation of the architectural heritage; and creating a record that can be used as a reference and as an instrument of cultural difussion.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	ddss9828
id	ddss9828
authors	Holmberg, Stig C.
year	1998
title	Anticipation in Evaluation and Assessment of Urban and Regional Plans
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to start a move toward better computer based supporting tools for the assessment of urban and regional plans, a new research and development endeavour is proposed. In so doing, anticipation andanticipatory computing, i.e. a technique applying modelling and simulation, is found to be an interesting and promising point of departure. Hence, a fuzzy cellular automata computer model (STF) for simulation and anticipation of geographical or physical space is constructed. The main idea is to map anurban plan onto the STF for its assessing. STF has a normalised and continuous, i.e. fuzzy, system variable while both the time and space dimensions take on discrete values. Further, while ordinary cellularautomata use local rules, global ones are employed in STF, i.e. there is a total interdependence among all the cells of the automata. Outcomes of STF can be interpreted more as possible future states than exact predictions. Preliminary results seem to be well in line with main characteristics of planned urban or regional geographical spaces. Further, for the managing of multi-criteria choice situations, a fuzzy procedure – the Ordered Weighted Average (OWA) procedure – with continuous control over the degree of ANDOR-ness and with independent control over the degree of tradeoff, is proposed.
keywords	Geographical space, Anticipatory Computing, Cellular Automata, Spatio Temporal Fuzzy Model (STF)
series	DDSS
last changed	2003/08/07 16:36

_id	4ae8
authors	Kokosalakis, Jen, Hohmann, L.M. and Pamplin, I.
year	1999
title	Benefits of Data Integration in Building Modelling: 3D Object Oriented Professional Collaboration
source	AVOCAAD Second International Conference [AVOCAAD Conference Proceedings / ISBN 90-76101-02-07] Brussels (Belgium) 8-10 April 1999, pp. 103-130
summary	This paper will review current progress across the building construction industry in meeting demands for use of data integration with the 3D building model as the coordinating device in building design and development. Decades of national initiatives from NEDO (1990) to Egan (1998) have striven to encourage collaboration in first the building design team and later targetting in programmas the means to accomplish this. In its 14th year 'The User Group' has intensified efforts to persuade the industry of the benefits of associating all data involved from the first briefing and conception of design needs and ideas, through the development of the design, testing for structures, costs, heating, lighting, urban and rural environmental impact, facilities management, adaptation and even the eventual controlled demolition of the building. Examples in this paper will be reported from 'The User Group' conference, "Profit from Data Integration: An industry update", (NEC, Birmingham, Nov. 1998), to indicate how various organisations are now profiting from data integration in 3D object orientated modelling.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	ddss9834
id	ddss9834
authors	Kovács, László Béla and Kotsis, István
year	1998
title	Basic Concepts and Prototypes of a Land Usage Design and Decision Support System
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper presents the basic ideas of a computer system for supporting urban design and decisions on land use. We argue, that the high complexity of urban design - inherent in the its large number of interdependent views and aspects - seems to justify a flexible support system capable of reasoning and conceptual modelling. Such a system may be prohibitively resource demanding unless we are able to build it up from smaller and larger modules of different types and functionality and which canbe created basically in an incremental way without a complete plan in advance. Two prototypes concerning urban designs and a small flexible design rule interpreter/handler is presented for free standing buildings.
series	DDSS
email
last changed	2003/08/07 16:36

_id	c837
authors	Lee, Jia-Her
year	1998
title	Modelling Mondrian's Design Processes and Their Architectural Associations Using Multilayer Neural Networks
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 455-464
doi	https://doi.org/10.52842/conf.caadria.1998.455
summary	Can artificial intelligence be used for design behavior of human beings? Human designer’s behavior and design thinking are extremely complicated. There is still argument about the relationship between the two until now. Therefore, this research only investigates regular and common design behavior. This essay is taking Mondrian of Neo-Plasticism as an example and neural networks systems as a tool to illustrate the core idea. It is hoped that we can simulate the design thinking ability, such as memory association and recognition of human designers. Computation of neural networks systems, as a result and the difference between human designers and computer, can be discussed too. Also, since the work of Neo-Plasticism Mondrian influences contemporary architecture design, industrial design, andvisual design directly or indirectly, floorplans of architect John Hejduk’s works were taken as an example to discuss the application of Neural networkss in the design field.
keywords	Neural Networks, Design Processes, Neo-Plasticism, Architectural Floorplans
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:51

_id	ddss9836
id	ddss9836
authors	Lee, Jia-Her and Liu, Yu-Tung
year	1998
title	Modelling Mondrians Design Processes and TheirArchitectural Associations Using Multilayer NeuralNetworks
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Can artificial intelligence be used for design behavior of human beings? Human designer’s behavior and design thinking are extremely complicated. There is still argument about the relationship between the two until now. Therefore, this research only investigates regular and common design behavior. This essay is taking Mondrian of Neo-Plasticism as an example and neural networks systems as a tool to illustrate the core idea. It is hoped that we can simulate the design thinking ability, such as memoryassociation and recognition of human designers. Computation of neural networks systems, as a result and the difference between human designers and computer, can be discussed too. Also, since the work of Neo-Plasticism Mondrian influences contemporary architecture design, industrial design, andvisual design directly or indirectly, floorplans of architect John Hejduk’s works were taken as an example to discuss the application of Neural networkss in the design field.
series	DDSS
last changed	2003/08/07 16:36

_id	215e
authors	Bai, Rui-Yuan and Liu, Yu-Tung
year	1998
title	Towards a Computerized Procedure for Visual Impact Analysis and Assessment - The Hsinchu Example
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 67-76
doi	https://doi.org/10.52842/conf.caadria.1998.067
summary	This paper examines the procedure of visual impact analysis and assessment proposed by Rahman and reviews the use of CAD applications in urban projects in the real world. A preliminary computerized procedure for visual impact analysis and assessment is proposed. An experiments was conducted in our laboratory to verify the preliminary procedure. In order to further study the revised procedure in real urban projects, it was also applied into the renew project of The Eastern Gate Plaza located in the center of city Hsinchu, Taiwan from 1996 to 1998. According to several face-to-face discussions with Hsinchu habitants, government officials, and professional designers, a final computerized procedure for visual impact analysis and assessment is concluded.
keywords	Environmental Simulation, Visual Impact Analysis and Assessment, Virtual Reality
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:54

_id	ddss9806
id	ddss9806
authors	Besio, M., Frixione, M. and Pedemonte, O.
year	1998
title	GIS technologies in the transfer of theknowledge project to the plan projectmultiple representation of the environmental spaces
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	An analysis is made of the relation between the conceptualand paradigmatic level of GIS technologies and the new forms of plan, whichmake environment the center of attention. The intention is to study newcriteria for zoning able to give contextual representations of theterritorial, environmental and landscape aspects of the geographical space,and also to study new legislative principles, able to establish integratedrules for theprojecting of soil uses, the safeguarding and recovery ofenvironmental systems and the tutelage and boosting of the landscape. The experimentation of GIS (Geographical Information System)technologies aims at the construction of systems helping to make decisionsfor the control of the environmental and landscape aspects of theterritory. An analysis is made of the ways in which there are formulated thedescriptions of the various aspects of the environment: the conceptsthrough which knowledge is expressed, the languages used forrepresentations, the cognitive models adopted. GIS technologies have made it possible to represent in an explicitmanner the paradigms underlying the various models of knowledge.Specifically, the following cognitive models have been developed:- ecological models of nature- ecological models of human settlement- ecological models of inhabitants’ mental perceptions
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9807
id	ddss9807
authors	Boelen, A.J. and Lugt, Hermen J. van der
year	1998
title	Communication of design parameters within groups
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper discusses the facilitation of worldwide concurrent design within the domains involved in environmental planning, urban design and civil engineering. Typical projects in these domains require the collaboration of many experts. Each of these has his reference framework for the taskat hand and for the variables used. The amount of variables makes it impossible for each project participant to take account for all possible impacts of proposed or planned actions. The typical project demands for a concurrent design process that enables all participants to concentrate ontheir domain of expertise. On the other hand the design process should enable them to have insight in the problems, within the domains of other experts. The system should provide a generic environment with the ability to attach domain specific knowledge. By providing this support thesystem integrates knowledge specific to various expert domains.In the PortPlan project within the LWI organization a system is being developed that supports the integration of various reference frameworks involved in environmental planning. We no longer need to develop a common language for the users. The system contains a dynamic set of scalebound reference objects for the domains involved. The system facilitates the communication of object characteristics. It also supports the presentation of these objects, in legends for each participant involved.We achieve the communication between participants using a dynamic legend. We also enable all participants to become informed on the interests of other participants. We achieve the technical communication using the exchange of interventions. We do not exchange results. This leads to alow "network traffic load" and thus enables the system to operate within the current Internet infrastructure. In this paper we present the problem area of concurrent design in environmental planning. We present this describing the background of our project, describing the overall architecture of the system and presenting the first findings of user studies.
keywords	Concurrent Design, Interfaces, Legends
series	DDSS
last changed	2003/11/21 15:16

_id	a2b0
id	a2b0
authors	Charitos, Dimitrios
year	1998
title	The architectural aspect of designing space in virtual environments
source	University of Strathclyde, Dept. of Architecure and Building Science
summary	This thesis deals with the architectural aspect of virtual environment design. It aims at proposing a framework, which could inform the design of three-dimensional content for defining space in virtual environments, in order to aid navigation and wayfinding. The use of such a framework in the design of certain virtual environments is considered necessary for imposing a certain form and structure to our spatial experience in there. Firstly, this thesis looks into literature from the fields of architectural and urban design theory, philosophy, environmental cognition, perceptual psychology and geography for the purpose of identifying a taxonomy of spatial elements and their structure in the real world, on the basis of the way that humans think about and remember real environments. Consequently, the taxonomy, proposed for space in the real world is adapted to the intrinsic characteristics of space in virtual environments, on the basis of human factors aspects of virtual reality technology. As a result, the thesis proposes a hypothetical framework consisting of a taxonomy of spatial and space-establishing elements that a virtual environment may comprise and of the possible structure of these elements. Following this framework, several pilot virtual environments are designed, for the purpose of identifying key design issues for evaluation. As it was impossible to evaluate the whole framework, six specific design issues, which have important implications for the design of space in virtual environments, are investigated by experimental methods of research. Apart from providing answers to these specific design issues, the experimental phase leads to a better understanding of the nature of space in virtual environments and to several hypotheses for future empirical research.
series	thesis:PhD
email
last changed	2003/10/29 21:37

_id	4233
authors	Day, Alan K. and Radford, Antony D.
year	1998
title	An Overview of City Simulation
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 183-192
doi	https://doi.org/10.52842/conf.caadria.1998.183
summary	The present state of development of city simulation is outlined, including the relationship between the physical city and the virtual city and the traditions and history which lies behind the development of computer simulations of cities.
keywords	3D City Modeling, Environmental Simulation, Geographic Information Systems, Cities, Urban Models
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:55

For more results click below: