Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 544

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9832
id	ddss9832
authors	Keuren, A. and Sanders, F.M.
year	1998
title	Integrated Land-Use and Network Modelling
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In this paper, the integration of modelling the changes in land-use and the changes in the infrastructure network will be described. Emphasis is laid on the automatic development of the network instead of changing the network by hand before simulating the changes in the land-use pattern.The approach and working procedure were tested by developing a pilot model simulating the spatial situation on the Frisian island Ameland (The Netherlands). The pilot is developed within the geographical information system Arcinfo. In this pilot model, special attention is paid to the extension of the infrastructure network and the allocation of more than one activity. Network analysis for the purpose of network extension is based on graph theory. Selection of links is based on the increase of the total accessibility within the network system as a result of adding a link to the network. The allocation of activities is based on several selection criteria and takes place within a cellular grid. Several methods ofselecting cells and links and the choices made will be discussed.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9801
id	ddss9801
authors	Achten, Henri and Leeuwen, Jos van
year	1998
title	A Feature-Based Description Technique for Design Processes: A Case Study
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series	DDSS
last changed	2003/11/21 15:15

_id	ddss9811
id	ddss9811
authors	Barbanente, A., Conte, E. and Monno, V.
year	1998
title	Changing trends and approaches in human and computer modelling for social housing policies
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper discusses conceptual issues, goals and preliminary results of an on-going research which aims at building a Decision Support System for public housing environmental oriented maintenance and management in a city in Southern Italy, Bari. Traditional post-war Italian housing policies are compared with more recent approaches in the field, pointing out the change from quantitative, aggregated, more simple building problems and relatedapproaches to qualitative, differentiated, complex ones integrating social, economic and environmental dimensions with the aim of regenerating deteriorated residential areas. The paper claims for the need shift, both in the human and computer areas, from traditional quantitative models to new approaches able to manage also qualitative variables, temporal dynamics, emergencies, and intentionality, since they appear key aspects of the real world to be modelled. The housing estate of Bari and its needs of maintenance and management are examined, eliciting essential related knowledge using the interview technique. The clear orientation towards sustainable policies for urban regeneration, at a local, national, and Community level, is also considered. The innovative and collaborative nature of such policies and the attention to be paid to the social aspects ofthe problem require a complex DSS, integrating various kind of hypertexts, information systems and case-based fuzzy expert systems, whose main aims, functions, software and general organisation are outlined in the paper.
series	DDSS
last changed	2003/11/21 15:16

_id	ga9921
id	ga9921
authors	Coates, P.S. and Hazarika, L.
year	1999
title	The use of genetic programming for applications in the field of spatial composition
source	International Conference on Generative Art
summary	Architectural design teaching using computers has been a preoccupation of CECA since 1991. All design tutors provide their students with a set of models and ways to form, and we have explored a set of approaches including cellular automata, genetic programming ,agent based modelling and shape grammars as additional tools with which to explore architectural ( and architectonic) ideas.This paper discusses the use of genetic programming (G.P.) for applications in the field of spatial composition. CECA has been developing the use of Genetic Programming for some time ( see references ) and has covered the evolution of L-Systems production rules( coates 1997, 1999b), and the evolution of generative grammars of form (Coates 1998 1999a). The G.P. was used to generate three-dimensional spatial forms from a set of geometrical structures .The approach uses genetic programming with a Genetic Library (G.Lib) .G.P. provides a way to genetically breed a computer program to solve a problem.G. Lib. enables genetic programming to define potentially useful subroutines dynamically during a run .* Exploring a shape grammar consisting of simple solid primitives and transformations. * Applying a simple fitness function to the solid breeding G.P.* Exploring a shape grammar of composite surface objects. * Developing grammarsfor existing buildings, and creating hybrids. * Exploring the shape grammar of abuilding within a G.P.We will report on new work using a range of different morphologies ( boolean operations, surface operations and grammars of style ) and describe the use of objective functions ( natural selection) and the "eyeball test" ( artificial selection) as ways of controlling and exploring the design spaces thus defined.
series	other
more	http://www.generativeart.com/
last changed	2003/08/07 17:25

_id	ddss9828
id	ddss9828
authors	Holmberg, Stig C.
year	1998
title	Anticipation in Evaluation and Assessment of Urban and Regional Plans
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In order to start a move toward better computer based supporting tools for the assessment of urban and regional plans, a new research and development endeavour is proposed. In so doing, anticipation andanticipatory computing, i.e. a technique applying modelling and simulation, is found to be an interesting and promising point of departure. Hence, a fuzzy cellular automata computer model (STF) for simulation and anticipation of geographical or physical space is constructed. The main idea is to map anurban plan onto the STF for its assessing. STF has a normalised and continuous, i.e. fuzzy, system variable while both the time and space dimensions take on discrete values. Further, while ordinary cellularautomata use local rules, global ones are employed in STF, i.e. there is a total interdependence among all the cells of the automata. Outcomes of STF can be interpreted more as possible future states than exact predictions. Preliminary results seem to be well in line with main characteristics of planned urban or regional geographical spaces. Further, for the managing of multi-criteria choice situations, a fuzzy procedure – the Ordered Weighted Average (OWA) procedure – with continuous control over the degree of ANDOR-ness and with independent control over the degree of tradeoff, is proposed.
keywords	Geographical space, Anticipatory Computing, Cellular Automata, Spatio Temporal Fuzzy Model (STF)
series	DDSS
last changed	2003/08/07 16:36

_id	37ae
authors	Tarandi, Väino
year	1998
title	Neutral intelligent CAD communication: information exchange in construction based upon a minimal schema
source	KTH Stockholm
summary	An improved information exchange is frequently proposed as one solution to the inefficiency problems which the construction industry is suffering from today. Such an improvement is very dependent of the use of information technology, IT. To enable an advanced use of IT, there is a need for integrated project communications frameworks and integrated industry wide information. This thesis discusses how product models can be used to improve the information exchange from design to construction. Today there are several approaches to product modelling. Some researchers propose very detailed models whereas others propose generic models with fewer concepts. In this area there is a close connection between research and standardisation, which is carried out by organisations such as the ISO STEP committee and the International Alliance for Interoperability. To get acceptance for a standard proposal, it has to be accepted by both users and standardisation bodies. Thus this research, in addition to the technical requirements on information content and structure, also discusses success factors for standardisation, implementation and usage. In order to define important requirements on a product model for information exchange between design and construction, current research, development and standardisation in the field of product modelling was studied. This thesis advocates a minimal approach in the number of concepts used in a product model, in combination with an external building element classification, following national industry practice. The minimal NICC schema, developed during this research, was tested in a prototype and test study. Three applications were tested: PreFacto (planning tool), Microsoft Project (time scheduling tool) and Calc3(cost estimation tool). From the CAD-system MCAD, NICC files with the building objects were created and transferred into a relational database from which the three applications received their specific input files. The results of the evaluation of the NICC schema and the test study demonstrated that a product model based on few concepts can manage the required information exchange.
keywords	Construction; Product Models; Standardisation; Minimal Models; Requirements; Conceptual Schema
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	ddss9831
id	ddss9831
authors	Kellett, Ronald and Girling, Cynthia
year	1998
title	Informing Public Participation in Neighborhood ScalePlanning and Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Neighborhood scale planning and design in many areas of the United States has been evolving toward a system of negotiated priorities and agreements. Common models include public workshops and design 'charrettes' which bring diverse stakeholders (citizens, land owners, developers, consultantsand public officials, for example) together to develop a mutually acceptable plan. Crucial to the quality and effectiveness of the outcome are decision support tools that help this diverse audience understand, communicate, collaborate and make decisions about complex and often emotional issuesof land use and design. Net Energy Communities (NEC), the project summarized in this paper, creates a suite of computer based tools for this purpose. NEC links three types of computer software — the spatial data manipulation, modeling and visualization capabilities of Geographic Information Systems (GIS), the illustration and information retrieval capabilities of multimedia relational databases and, the simulation and comparison capabilities of spreadsheet-based calculation models;into four tools — a site modeller, an elements of neighborhood database, a scenario modeller and ascenario calculator. This paper reports on the NEC project as an example of decision support tools for public participation using illustrations and examples from a 420 acre demonstration neighborhood design in progress for the City of Corvallis, Oregon, USA.
series	DDSS
last changed	2003/08/07 16:36

_id	2587
authors	Gong, Yihong
year	1998
title	Intelligent image databases
source	Boston, Kluwer
summary	Intelligent Image Databases: Towards Advanced Image Retrieval addresses the image feature selection issue in developing content-based image retrieval systems. The book first discusses the four important issues in developing a complete content-based image retrieval system, and then demonstrates that image feature selection has significant impact on the remaining issues of system design. Next, it presents an in-depth literature survey on typical image features explored by contemporary content-based image retrieval systems for image matching and retrieval purposes. The goal of the survey is to determine the characteristics and the effectiveness of individual features, so as to establish guidelines for future development of content-based image retrieval systems. Intelligent Image Databases: Towards Advanced Image Retrieval describes the Advanced Region-Based Image Retrieval System (ARBIRS) developed by the authors for color images of real-world scenes. They have selected image regions for building ARBIRS as the literature survey suggests that prominent image regions, along with their associated features, provide a higher probability for achieving a higher level content-based image retrieval system. A major challenge in building a region-based image retrieval system is that prominent regions are rather difficult to capture in an accurate and error-free condition, particularly those in images of real-world scenes. To meet this challenge, the book proposes an integrated approach to tackle the problem via feature capturing, feature indexing, and database query. Through comprehensive system evaluation, it is demonstrated how these systematically integrated efforts work effectively to accomplish advanced image retrieval. Intelligent Image Databases: Towards Advanced Image Retrieval serves as an excellent reference and may be used as a text for advanced courses on the topic.
series	other
last changed	2003/04/23 15:14

_id	ddss9821
id	ddss9821
authors	Varghese, G., Dhingra, S.L. and Sikdar, P.K.
year	1998
title	The Role of Expert Systems, and RDBMS Strategies in a DSSfor Urban Bus Transport Management
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Efficient and well-managed urban bus transport systems supported by information systems with decision support capabilities developed within the framework of an advanced Relational Data Base Management System (RDBMS) can provide critical information at the right moment and assisttransport managers in conducting performance evaluations. This paper includes discussions on the use of the entity-relationship (E-R) model (a semantic data modeling technique) in the development of thestructure of the conceptual database for the information system planned to be implemented using RDBMS. The E-R data modeling approach enables database designers in obtaining the third normal forms of related databases for the efficient functioning of the information system. The inportance of decision tables in the development of DSS modules using Expert System shells are also discussed. The DSS modules will assist transport managers in the analysis of operational performance for bus depots or the organization as a whole. The E-R diagrams generated and the decision files developed will serve as important documents that can enhance the adaptability of the DSS to the changing needs ofthe organizations. The conceptualization of the information system to support decision-making in an RDBMS framework provides the advantage of a very low 'disk seek' time and facilitates frequent generation of reports.
series	DDSS
last changed	2003/08/07 16:36

_id	a136
authors	Blaise, J.Y., Dudek, I. and Drap, P.
year	1998
title	Java collaborative interface for architectural simulations A case study on wooden ceilings of Krakow
source	International Conference On Conservation - Krakow 2000, 23-24 November 1998, Krakow, Poland
summary	Concern for the architectural and urban preservation problems has been considerably increasing in the past decades, and with it the necessity to investigate the consequences and opportunities opened for the conservation discipline by the development of computer-based systems. Architectural interventions on historical edifices or in preserved urban fabric face conservationists and architects with specific problems related to the handling and exchange of a variety of historical documents and representations. The recent development of information technologies offers opportunities to favour a better access to such data, as well as means to represent architectural hypothesis or design. Developing applications for the Internet also introduces a greater capacity to exchange experiences or ideas and to invest on low-cost collaborative working platforms. In the field of the architectural heritage, our research addresses two problems: historical data and documentation of the edifice, methods of representation (knowledge modelling and visualisation) of the edifice. This research is connected with the ARKIW POLONIUM co-operation program that links the MAP-GAMSAU CNRS laboratory (Marseilles, France) and the Institute HAiKZ of Kraków's Faculty of Architecture. The ARKIW programme deals with questions related to the use of information technologies in the recording, protection and studying of the architectural heritage. Case studies are chosen in order to experience and validate a technical platform dedicated to the formalisation and exchange of knowledge related to the architectural heritage (architectural data management, representation and simulation tools, survey methods, ...). A special focus is put on the evolution of the urban fabric and on the simulation of reconstructional hypothesis. Our contribution will introduce current ARKIW internet applications and experiences: The ARPENTEUR architectural survey experiment on Wie¿a Ratuszowa (a photogrammetrical survey based on an architectural model). A Gothic and Renaissance reconstruction of the Ratusz Krakowski using a commercial modelisation and animation software (MAYA). The SOL on line documentation interface for Kraków's Rynek G_ówny. Internet analytical approach in the presentation of morphological informations about Kraków's Kramy Bogate Rynku Krakowskiego. Object-Orientation approach in the modelling of the architectural corpus. The VALIDEUR and HUBLOT Virtual Reality modellers for the simulation and representation of reconstructional hypothesis and corpus analysis.
series	other
last changed	2003/04/23 15:14

_id	ddss9829
id	ddss9829
authors	De Hoog, J., Hendriks, N.A. and Rutten, P.G.S.
year	1998
title	Evaluating Office Buildings with MOLCA(Model for Office Life Cycle Assessment)
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	MOLCA (Model for Office Life Cycle Assessment) is a project that aims to develop a tool that enables designers and builders to evaluate the environmental impact of their designs (of office buildings) from a environmental point of view. The model used is based on guidelinesgiven by ISO 14000, using the so-called Life Cycle Assessment (LCA) method. The MOLCA project started in 1997 and will be finished in 2001 resulting in the aforementioned tool. MOLCA is a module within broader research conducted at the Eindhoven University of Technology aiming to reduce design risks to a minimum in the early design stages.Since the MOLCA project started two major case-studies have been carried out. One into the difference in environmental load caused by using concrete and steel roof systems respectively and the role of recycling. The second study focused on biases in LCA data and how to handle them. For the simulations a computer-model named SimaPro was used, using the world-wide accepted method developed by CML (Centre for the Environment, Leiden, the Netherlands). With this model different life-cycle scenarios were studied and evaluated. Based on those two case studies and a third one into an office area, a first model has been developed.Bottle-neck in this field of study is estimating average recycling and re-use percentages of the total flow of material waste in the building sector and collecting reliable process data. Another problem within LCA studies is estimating the reliability of the input data and modelling uncertainties. All these topics will be subject of further analysis.
keywords	Life-Cycle Assessment, Office Buildings, Uncertainties in LCA
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9826
id	ddss9826
authors	Hendricx, A., Geebelen, B., Geeraerts, B. and Neuckermans, H.
year	1998
title	A methodological approach to object modelling in the architectural designprocess
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper describes a first prototype constructed in search for a central object model. It presents all possible data, concepts and operations concerning the architectural design process in the early phases.A central model of the process of design is essential: going from one design phase into another, the model describes geometrical shapes, abstract concepts like space and activity, concrete physical building elements and the basic operations all these entities undertake. Emphasis is put on combining all these different viewpoints, thus enabling the designer to use a broad range of design strategies. The aim is to help him and not steer or even hamper his creative process. Information necessary toassist the user of the system concerning energy calculation, stability checks etc can be extracted. By means of appropriate interfaces not only those tests built on top of the system but also existing software packages can make use of the model’s object structure. The implemented object model is one of the cornerstones of the IDEA+ project, aiming to provide an Integrated Design Environment for Architecture.
keywords	object model, building model, CAAD, IDEA+, MERODE
series	DDSS
last changed	2003/08/07 16:36

_id	6cfc
authors	Johnson Brian R. and Millet, Marietta S.
year	1998
title	Development of a Case Study "Multi-Site" on the World Wide Web
doi	https://doi.org/10.52842/conf.caadria.1998.223
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 223-232
summary	Seeking to enhance the availability and quality of architectural case studies, we examine the web, believing that it may help to simplify authorship, distribution, and navigation of a catalog of case studies. A disk-based multi-media prototype from an earlier effort has been converted to the web and generalized to create a template. Warehousing and navigation of multiple case studies forms the main focus of the current project. Two existing models, monolithic web sites and web rings, are considered and rejected. A third approach is developed which promises to provide a low-budget low-overhead infrastructure within which to house an indefinite number of case studies, while permitting free-form browsing of the collection. The approach which we have developed creates what we call a "multi-site".
keywords	Information Delivery Systems for Design, Cooperative Authorship, World Wide Web
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:52

_id	ddss9819
id	ddss9819
authors	Emdanat, S. S. and Vakalo, E.-G.
year	1998
title	Sharing Design Knowledge Using Shape Algebras
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Recent work on shape algebras and the maximal element representation produced a uniform and composable representation of shapes. This paper presents ongoing work to formulate a framework for sharing design knowledge based on shape algebras. The shape algebraic definitions are translated into Ontolingua, a framework for representing ontologies. It provides forms for defining classes, relations, functions, objects, and theories that are part of a conceptualization. The paper discusses some of the axioms and definitions of this ontology. It discusses the factors that influenced its design and the selection of its representational abstractions.
series	DDSS
email
last changed	2003/08/07 16:36

_id	ceca
authors	Schmidt, L.C. and Cagan, Jonathan
year	1998
title	Optimal Configuration Design: an Integrated Approach Using Grammars
source	Journal of Mechanical Design 120, no. 1: 2-9
summary	A computational approach to design that integrates conceptual design, configuration design, and component selection tasks overcomes some of the barriers to successful design automation. FFREADA is an implementation of a general design generation and optimization algorithm featuring hierarchical ordering of grammar based-design generation processes at different levels of abstraction. FFREADA is used to generate near-optimal hand-held power drill trains in a space which exceeding 200 million designs that are not limited to any particular functional architecture or component configuration. Drill power train designs within 1 percent of the optimal solution are found in minutes by sampling 302,000 design states on average. Optimal configurations are found for drills with three different torque requirements.
series	journal paper
last changed	2003/04/23 15:50

_id	ddss9802
id	ddss9802
authors	Akin, O., Aygen, Z., Cumming, M., Donia, M., Sen, R. and Zhang, Y.
year	1998
title	Computational Specification of Building Requirements in theEarly Stages of Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	We have been exploring computational techniques to help building designers to specify design requirements during the early stages of design. In the past, little has been accomplished in this area either in terms of innovative computational technologies or the improvement of design performance.The prospect of improving design productivity and creating a seamless process between requirements specification and formal design are our primary motivations. This research has been conducted as partof a larger project entitled SEED (Software Environment to Support Early Phases in Building Design). SEED features an open-ended modular architecture, where each module provides support for a design activity that takes place in early design stages. Each module is supported by a database to store and retrieve information, as well as a user interface to support the interaction with designers. The module described in this paper, SEED-Pro (the architectural programming module of SEED), is a workingprototype for building design requirements specification. It can be used by other modules in SEED or by design systems in other domains, such as mechanical engineering, civil engineering, industrial designand electrical engineering. Our approach to SEED-Pro is divided into two phases: core, and support functionalities. The core functionalities operate in an interactive mode relying on a case-based approach to retrieve and adapt complex specification records to the problem at hand. The supportfunctionalities include the case-base, the data-base, and the standards processing environment for building specification tasks. Our findings indicate that SEED-Pro: (1) is a tool that structures the unstructured domain of design requirements; (2) enables the integration of design requirements with the rest of the design process, (3) leads to the creation of complex case-bases and (4) enables the observation of their performance in the context of real world design problems.
series	DDSS
last changed	2003/11/21 15:15

_id	ddss9808
id	ddss9808
authors	Boelen, A.J.
year	1998
title	Pattern Matching for Decision Support
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	In this paper is discussed how we can use pattern matching techniques in combination with object orientation to support decision makers in arranging offices and industrial and commercial facilities in existing urban areas. The method used is based on the findings of a Ph.D. project almost finishedwhen writing this. The tool under development is specifically useful for rehabilitation of deteriorated industrial or commercial areas.I consider such an area already occupied and surrounded with all kinds of urban objects and connected to all kinds of infrastructure. I can describe this area in available objects and facilities. Furthermore we can describe the areas capacity left within the infrastructure, the capacity in forexample work force or clients and the available band width in noise or pollution. By describing the area in terms of availability of capacity to absorb or produce flows of people, goods, energy and information we sketch the room available for certain types of industrial or commercial facilities. I developed a technique to describe industrial and commercial facilities in such a way that we enable the match between these and the characteristics of an area available. Pattern matching techniquesenable the system to generate best matches between available areas, locations and facilities. This model can be adapted in several object oriented geographical information systems and be integrated with other information systems that for example calculate the pollution of certain kinds of facilities. The rules to match with are partly based on objective, measurable data like available capacity on the electricity network and needed electrical power for certain facilities. Other matching rules are based on political norms on for example acceptable pollution levels and suggested pollution of facilities. The paper presents the problem area of industrial area rehabilitation, describes the architecture of the modeling technique and presents the first findings of implementation studies.
keywords	Pattern matching, Object GIS, Urban object modeling, Facility planning
series	DDSS
last changed	2003/11/21 15:16

_id	817b
authors	Bong, C.W. and Wang, Y.C.
year	2002
title	A Shape Compactness Measurement Indexing with Fuzzy Multicriteria Decision Making Approach
doi	https://doi.org/10.52842/conf.caadria.2002.093
source	CAADRIA 2002 [Proceedings of the 7th International Conference on Computer Aided Architectural Design Research in Asia / ISBN 983-2473-42-X] Cyberjaya (Malaysia) 18–20 April 2002, pp. 093-100
summary	Compactness of a district or zone is determined by considering its appearance and the area of dispersal of the district (Altman, 1998) and it is used as a characteristic to describe shape (Shiode, 1998; Knight, 1997). However, existing compactness measurement used to assess district plans in redistricting applications are vague and imprecision although there are more than thirty over Euclidean or non-Euclidean measurement methods. Therefore, this paper presents an integrated shape compactness measurement indexing with a fuzzy multicriteria decision making approach (FMCDM) to enhance the measurement of shape compactness. An experiment is conducted in order to verify the practically of the proposed model to improve existing compactness measurement method.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ddss9838
id	ddss9838
authors	Mallory-Hill, Shauna
year	1998
title	Building a Case-Based Design Assistant forWorkplace Environment Design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	This paper reports on the early stages of development of a case-based design tool. The purpose of this tool, called the Workplace Environment Design Advisor (WEDA), is to support architects in the conceptual design of workplace environments. The objective of this system is to provide electronic storage, retrieval and the exploration of post-occupancy performance knowledge of workplace environments. The paper provides a description of the reasoning behind choosing a case-based approach and thesteps used to develop a prototype case-based system. This includes recent efforts to collect and structure real case data. This experience led to observations about issues such as case content (the availability and format of post-occupancy data) and retrieval strategies. The data collected for use in the system is based on a building-in-use study of the Centre ofBuilding Research’s office rooms located at the University of Eindhoven, the Netherlands.
series	DDSS
last changed	2003/08/07 16:36

_id	489a
authors	Matthews, K., Duff, S. and Corner, D.
year	1998
title	A Model for Integrated Spatial and Structural Design of Buildings
doi	https://doi.org/10.52842/conf.caadria.1998.123
source	CAADRIA ‘98 [Proceedings of The Third Conference on Computer Aided Architectural Design Research in Asia / ISBN 4-907662-009] Osaka (Japan) 22-24 April 1998, pp. 123-132
summary	Recent advances in computer graphics and 3D user interfaces have enabled the emergence of 3D sketch modeling as a viable approach to architectural design, especially in the early schematic phase. This paper describes how a system can be built and used which integrates the capabilities of a good structural analysis system in the user-friendly working environment of a design-oriented modeling program. The structure of a building model as seen by finite element algorithms is a schematic idealization of the building's physical structure into nodes, elements, internal releases, boundary conditions, and loads. The more familiar architectural model used for design visualization represents spatial elements such as roofs, floors, walls, and windows. Rather than treat these models independently, the structural model can be defined in relation to the architectural as a virtual model with inherited common characteristics and additional relational and attribute information, using feature-based geometry data structures to organize topological intelligence in the spatial model. This provides the basis for synchronous modification of structural and architectural aspects of the design.
keywords	Structural Design, Spatial Design, Design Integration, Human-Computer Interaction, Feature-Based Modeling, Finite Element Analysis, Geometric Inference
series	CAADRIA
email
more	http://www.caadria.org
last changed	2022/06/07 07:58

For more results click below: