CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 556

_id ddss9806
id ddss9806
authors Besio, M., Frixione, M. and Pedemonte, O.
year 1998
title GIS technologies in the transfer of theknowledge project to the plan projectmultiple representation of the environmental spaces
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary An analysis is made of the relation between the conceptualand paradigmatic level of GIS technologies and the new forms of plan, whichmake environment the center of attention. The intention is to study newcriteria for zoning able to give contextual representations of theterritorial, environmental and landscape aspects of the geographical space,and also to study new legislative principles, able to establish integratedrules for theprojecting of soil uses, the safeguarding and recovery ofenvironmental systems and the tutelage and boosting of the landscape. The experimentation of GIS (Geographical Information System)technologies aims at the construction of systems helping to make decisionsfor the control of the environmental and landscape aspects of theterritory. An analysis is made of the ways in which there are formulated thedescriptions of the various aspects of the environment: the conceptsthrough which knowledge is expressed, the languages used forrepresentations, the cognitive models adopted. GIS technologies have made it possible to represent in an explicitmanner the paradigms underlying the various models of knowledge.Specifically, the following cognitive models have been developed:- ecological models of nature- ecological models of human settlement- ecological models of inhabitants’ mental perceptions
series DDSS
last changed 2003/11/21 15:16

_id 42
authors Kos, Jose Ripper
year 1998
title Analisis de la Evolucion de la Ciudad a Traves de un Multimedia Interactivo (Analisis of the Evolution of the City by Means of Interactive Multimedia)
source II Seminario Iberoamericano de Grafico Digital [SIGRADI Conference Proceedings / ISBN 978-97190-0-X] Mar del Plata (Argentina) 9-11 september 1998, pp. 316-323
summary The purpose of this work is the discussion of issues related to the use of interactive multimedia for the documentation of buildings and cities. These issues emerged from the analysis of the cities of Havana and Rio de Janeiro, as researched at PROURB, the Graduate Program of Urban Design of the School of Architecture and Urbanism, Federal University of Rio de Janeiro. Interactive multimedia applications have been developed through many years. Some areas presented mature works, other are still researching specific forms to employ the available resources of this new media. In this situation are the interpretations of buildings and cities, which still hasn't found a proper language for it's complexly and scale. Interactive multimedia has many resources which are adequate for buildings and cities' analysis and representation. Two questions may be considered crucial for the use of hyperdocuments in architecture and urban planning and design: the first allows us a glimpse of a technique which can document the bridge between the architectís space imagining and this space experienced by it's users. The second issue is the proximity between the role of the architect and those of the author of interactive multimedia.
series SIGRADI
email
last changed 2016/03/10 09:54

_id ddss9811
id ddss9811
authors Barbanente, A., Conte, E. and Monno, V.
year 1998
title Changing trends and approaches in human and computer modelling for social housing policies
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary The paper discusses conceptual issues, goals and preliminary results of an on-going research which aims at building a Decision Support System for public housing environmental oriented maintenance and management in a city in Southern Italy, Bari. Traditional post-war Italian housing policies are compared with more recent approaches in the field, pointing out the change from quantitative, aggregated, more simple building problems and relatedapproaches to qualitative, differentiated, complex ones integrating social, economic and environmental dimensions with the aim of regenerating deteriorated residential areas. The paper claims for the need shift, both in the human and computer areas, from traditional quantitative models to new approaches able to manage also qualitative variables, temporal dynamics, emergencies, and intentionality, since they appear key aspects of the real world to be modelled. The housing estate of Bari and its needs of maintenance and management are examined, eliciting essential related knowledge using the interview technique. The clear orientation towards sustainable policies for urban regeneration, at a local, national, and Community level, is also considered. The innovative and collaborative nature of such policies and the attention to be paid to the social aspects ofthe problem require a complex DSS, integrating various kind of hypertexts, information systems and case-based fuzzy expert systems, whose main aims, functions, software and general organisation are outlined in the paper.
series DDSS
last changed 2003/11/21 15:16

_id 3d1d
authors De Vries, B. and Jessurun, A.J.
year 1998
title An Experimental Design System for the Very Early Design Stage
source Timmermans (ed.) Proceedings of the 4th Conference on Design and Decision Support Systems in Architecture and Urban Planning, Maastricht
summary The concepts of the experimental design system that are discussed are feature modeling and geometrical constraints. The main technique for creating the user environment is Virtual Reality. Feature modeling forms the basis for managing the design data. To start with, data storage is implemented in a Relational Data Base Management System. Along with this a (traditional) interface is developed for managing the data. Data management consists of feature type creation and feature type instancing. Features are used to define building elements, their relationships and additional constraints. Apart from the design data, geometrical data are stored. Possible design solutions can be limited using geometrical constraints. Specifying connection types between building elements result in a set of solutions for the position of the bounding boxes of the building elements in space.
series other
email
last changed 2003/04/23 15:50

_id ddss9816
id ddss9816
authors Demirel, Füsun
year 1998
title A Research on Housing in Ankara-Turkey
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary The subject of this research contains an opinionnaire study and its results obtained from 30 houses in Ankara-TURKEY in which the people have middle and upper middle income so as to identify their favourites and criticsm about housing, regarding to their both houses and environment as well as tomake the definition of ideal houses and environment. Totally 30 subjects of which 21 are female and 9 are male which represent middle and upper middle incomed people. The average age of the subjects whose age range vary between 21 and 70 is 41. In the study, firstly, the opinionnaire questions were prepared and the housing in which the middle and upper middle incomed people live were determined as socio-economic level to be examined. Next permission and time reservation were requested fromthe owner's of housing to implement the study. During the times which have been determined by the subjects, the following procedure has been followed reading of the opinionnaire forms by myself and recording of responses of the subjects exactly, drawing of reliefs and plans of house, taking pictures of outer views and surroundings of housings. Tendencies of users' against various conditions have been transformed into numerical values from 1 to 7 in a scale with 7 column. In the light of above information; Considering the country conditions it was observed that these housing were excessivelylarge and were built for ostentation purposes, not for functional purposes. Usefulness, that is to say, design of house is in the bottom of the criteria list and it is not an important factor to choose the house, form another part of interesting findings of this study. Another significant result has been observed due to users desire about their house. Although the rising of design which was in 6th rank among the reasons to prefer a house was not an effective criteria on users' attitudes merely to have ahouse, this criteria was the 1st rank (87 %) among reasons due to the advantages that were provided for the users with respected to design and functionality as a result of meticulous studies of architects.Users' criticisms on their vicinity have shown variations according to their sexes.As a result of this research that were initiated to define the ideal house and environment concepts; interesting and detailed data about users' tendencies in the scope of both house and settling are available in "Findings" part of this study. Rising of desing criteria which was the 6 th rank amongcriteria's to choose a house, to 1st rank has brought the following conclusion: since the users are not able to act consciously due to the consideration of the properly owing action much more important,the main duty here is performed by the planner. Hence, starting from the assumption that users living in housings are extremely sensitive to their houses and especially environments, provision of public participation via this kind of opinionnaire studies while creating new environments, may contribute to create such environments in which people can live.
series DDSS
last changed 2003/08/07 16:36

_id 1d83
authors Dodge, M., Doyle, S. and Smith, A.
year 1998
title Visual Communication in Urban Planning and Urban Design
source Working Paper 2; Centre for Advanced Spatial Analysis Working Papers; London; June 1998
summary This Case Study documents the current status of visual communication in urban design and planning. Visual communication is examined through discussion of standalone and network media, specifically concentrating on visualisation on the World Wide Web (WWW). First, we examine the use of Solid and Geometric Modelling for visualising urban planning and urban design. This report documents and compares examples of the use of Virtual Reality Modelling Language (VRML) and proprietary WWW based Virtual Reality modelling software. Examples include the modelling of Bath and Glasgow using both VRML 1.0 and 2.0. The use of Virtual Worlds and their role in visualising urban form within multi-user environments is reviewed. The use of Virtual Worlds is developed into a study of the possibilities and limitations of Virtual Internet Design Arena's (ViDA's), an initiative undertaken at the Centre for Advanced Spatial Analysis, University College London. The use of Virtual Worlds and their development towards ViDA's is seen as one of the most important developments in visual communication for urban planning and urban design since the development plan. Secondly, the role of photorealistic media in the process of communicating plans is examined. The process of creating photorealistic media is documented, and examples of the Virtual Streetscape and Wired Whitehall Virtual Urban Interface System are provided. The conclusion is that, although the use of photo-realistic media on the WWW provides a way to visually communicate planning information, its use is limited. The merging of photorealistic media and solid geometric modelling in the creation of Augmented Reality is reviewed. Augmented Reality is seen to provide an important step forward in the ability quickly and easily to visualise urban planning and urban design information. Third, the role of visual communication of planning data through GIS is examined in terms of desktop, three dimensional, and Internet based GIS. The evolution to Internet GIS is seen as a critical component in the development of virtual cities that will allow urban planners and urban designers to visualise and model the complexity of the built environment in networked virtual reality. Finally, a viewpoint is put forward of the Virtual City, linking Internet GIS with photorealistic multi-user Virtual Worlds. At present there are constraints on how far virtual cities can be developed, but a view is provided on how these networked virtual worlds are developing to aid visual communication in urban planning and urban design.
series other
last changed 2003/04/23 15:50

_id ddss9828
id ddss9828
authors Holmberg, Stig C.
year 1998
title Anticipation in Evaluation and Assessment of Urban and Regional Plans
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary In order to start a move toward better computer based supporting tools for the assessment of urban and regional plans, a new research and development endeavour is proposed. In so doing, anticipation andanticipatory computing, i.e. a technique applying modelling and simulation, is found to be an interesting and promising point of departure. Hence, a fuzzy cellular automata computer model (STF) for simulation and anticipation of geographical or physical space is constructed. The main idea is to map anurban plan onto the STF for its assessing. STF has a normalised and continuous, i.e. fuzzy, system variable while both the time and space dimensions take on discrete values. Further, while ordinary cellularautomata use local rules, global ones are employed in STF, i.e. there is a total interdependence among all the cells of the automata. Outcomes of STF can be interpreted more as possible future states than exact predictions. Preliminary results seem to be well in line with main characteristics of planned urban or regional geographical spaces. Further, for the managing of multi-criteria choice situations, a fuzzy procedure – the Ordered Weighted Average (OWA) procedure – with continuous control over the degree of ANDOR-ness and with independent control over the degree of tradeoff, is proposed.
keywords Geographical space, Anticipatory Computing, Cellular Automata, Spatio Temporal Fuzzy Model (STF)
series DDSS
last changed 2003/08/07 16:36

_id ddss9833
id ddss9833
authors Koutamanis, Alexander
year 1998
title Information systems and the Internet: towards a news counter-revolution?
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary The explosive evolution of the Internet into a ubiquitous infrastructure influences the generation, dissemination and use of information. From a historical perspective it redefines issues that have been central to the news and information industry since the seventeenth century. One such issue is periodicity. The practicalities of news media and news as a commodity have resulted into the periodical appearance of news and, by extension, of all actual information. Integral to periodicity iscontrol of information production by institutions or other authorized channels. With the advent of the Internet we are reverting to an a-periodical information system characterized by personalization anddirect contact between information provider and information user. Rather than relying on the institutional status of the propagation channels, we are increasingly evaluating information quality by the integrity, up-to-datedness and reliability of its source. Moreover, we are able to complement orcorroborate information by linking different sources together in compound representations. The extent and complexity of the Internet make search intermediaries necessary. These collect and collate information either ad hoc (responding to a user query) or as part of wider documentation projects. These projects re-introduce institutionalization but the autonomous, intelligent mechanisms used by such intermediaries promote personalization in information retrieval and facilitate decentralization ofinformation supply into a cottage industry. In addition to a-periodicity, directness and wider availability of information, decentralization provides a new social and technical context for precedent and case-based approaches in designing.
series DDSS
last changed 2003/08/07 16:36

_id 1373
authors Pfaffenbichler, Paul C. and Emberger, Günter
year 2003
title Are European cities becoming similar?
source CORP 2003, Vienna University of Technology, 25.2.-28.2.2003 [Proceedings on CD-Rom]
summary The paper discusses city specific development patterns to overcome todays transport problems. The results are based on recent andongoing research activities at TUW-IVV and ITS. At previous CORP-conferences, we presented the basics and the development of aplanning support tool to find optimal policy packages in urban transport and land use (Emberger, 1998), (Pfaffenbichler, Emberger, 2001). The core of this planning support tool is a dynamic land use and transport interaction model. This model, which we refer to as Sketch Planning Model (SPM), is embedded into an appraisal and optimisation framework. The SPM and this framework were developed in the recently finished European Union funded research project PROSPECTS1. Case studies with this planning supporttool were performed within PROSPECTS for the cities Edinburgh, Helsinki, Madrid, Oslo, Stockholm and Vienna. These cities are principally comparable in regards of their status (capitals and major business and education centres), but different in their size, population density, transport system etc. A set of policy instruments like public transport improvements, car traffic restrictions, and infrastructure provision was available to formulate strategies to reduce negative impacts of transport and to increase welfare. The overall objective was a sustainable development of the city. Although the instruments and the goals are similar in all investigatedcites, different solutions were adequate. The solutions vary in regard of spatial implementation, implementation time and level of implementation. The paper will highlight some reasons for the different development paths of the cities. As well the comparison of the do nothing scenario as the comparison of the most feasible policy strategies shows that European cities are different, need different solutions for their problems and will stay different in the future.
series other
email
last changed 2003/03/11 20:39

_id ddss9852
id ddss9852
authors Shalaby, Tarek, Scutt, Tom and Palmer, Diane
year 1998
title The ‘Intelligent Map’ as A Decision Support System for UrbanPlanners in Nottingham Using GIS Technology
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary Location is often considered as the most important factor leading to the success of public or private services. Location is the key in maximising accessibility and keeping operating cost low. A collaborative research project between ‘Nottingham University’ and the ‘Environmental ServicesDepartment of Nottingham City Council’ is developing an ‘Intelligent Map’ for identifying optimum locations for the recycling centres in the city. The object is to develop a new decision support system for urban planners, to be used as a management and analytical tool for improving locational decisionmaking. This paper discusses the technique of the Intelligent Map, and its concept. The paper includes three main sections. The first discusses the introduction of the mini-recycling centres in Nottingham, theproblems associated with their spatial distribution, and the need for a new decision support system using GIS technology. The second examines traditional techniques using GIS for identifying optimum locations and calculating catchment areas. The third explains the concept of the Intelligent Map; discussion takes the form of an initial analysis of the likely method to be applied, and then briefly outlines some of the prototyping work that is currently taking place at Nottingham.
series DDSS
last changed 2003/08/07 16:36

_id ddss9851
id ddss9851
authors Torre, Carmelo and Selicato, Francesco
year 1998
title Consequences of Interdisciplinary Approaches in the Construction ofKnowledge-Bases
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary The character of interdisciplinarity in planning approaches create a new, intriguing, emerging complexity (Funtowitcz and Ravetz, 1994) in problems and in knowledge-structuring of contexts of planning practices. The key-role played by information systems (IS) implicates a re-consideration ofcharacter of knowledge to be used in knowledge-bases. The necessity of considering knowledge domains coming from social, cultural, economical, technical, physical and naturalistic approaches means dealing with different scales of value, with non homogenous parameters. The necessity ofmanaging flexible knowledge rises on the fore as fundamental issue for future information system oriented to supporting decisions. Might information systems be useful in this interdisciplinary approach ? It is necessary to contain in a knowledge-base both quantitative and qualitativeinformation ? Three alternatives are available for a conceptual discussion :the possibility of identify new approaches, in order to develop information systems able in managing new knowledge; the necessity of adding new support systems oriented to manage soft knowledge, to traditionalgeographic information systems (GIS); the possibility of non using support systems coming from a technological vision of problem for nontechnical knowledge (Latouche 1996). The first two paragraphs are due to F. Selicato. The third and the fourth paragraph are due to C. Torre.
series DDSS
last changed 2003/08/07 16:36

_id ddss9821
id ddss9821
authors Varghese, G., Dhingra, S.L. and Sikdar, P.K.
year 1998
title The Role of Expert Systems, and RDBMS Strategies in a DSSfor Urban Bus Transport Management
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary Efficient and well-managed urban bus transport systems supported by information systems with decision support capabilities developed within the framework of an advanced Relational Data Base Management System (RDBMS) can provide critical information at the right moment and assisttransport managers in conducting performance evaluations. This paper includes discussions on the use of the entity-relationship (E-R) model (a semantic data modeling technique) in the development of thestructure of the conceptual database for the information system planned to be implemented using RDBMS. The E-R data modeling approach enables database designers in obtaining the third normal forms of related databases for the efficient functioning of the information system. The inportance of decision tables in the development of DSS modules using Expert System shells are also discussed. The DSS modules will assist transport managers in the analysis of operational performance for bus depots or the organization as a whole. The E-R diagrams generated and the decision files developed will serve as important documents that can enhance the adaptability of the DSS to the changing needs ofthe organizations. The conceptualization of the information system to support decision-making in an RDBMS framework provides the advantage of a very low 'disk seek' time and facilitates frequent generation of reports.
series DDSS
last changed 2003/08/07 16:36

_id ddss9862
id ddss9862
authors Vries, B. de and Jessurun, A.J.
year 1998
title An experimental design system for the veryearly design stage
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary The concepts of the experimental design system that are discussed are feature modeling and geometrical constraints. The main technique for creating the user environment is Virtual Reality. Feature modeling forms the basis for managing the design data. To start with, data storage is implemented in a Relational Data Base Management System. Alongwith this a (traditional) interface is developed for managing the data. Data management consists of feature type creation and feature type instancing. Features are used to define building elements, their relationships and additional constraints. Apart from the design data, geometrical data are stored. Possible design solutions can be limited using geometrical constraints. Specifying connection types between building elements result in a set of solutions for the position of the bounding boxes of the building elements in space.
series DDSS
last changed 2003/08/07 16:36

_id ddss9863
id ddss9863
authors Yaakup, A., Johar, F. and Yusof, I.M.
year 1998
title Development Control System and GIS for Local Authority in Malaysia:A Case of Kuala Lumpur City Hall
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary This paper examines the functions of local authority particularly in the context of planning and development control. The process of development control involves a technique for the systematic compilation of expert quantitative analysis and qualitative assessment of a project's land use and development viability, including its effect on the surrounding area, andthe presentation of results in a way which enables the importance of the predicted results, and the scope for modifying or mitigating them, to be properly evaluated by the relevant decision making body before a planning application decision is rendered. Taking Kuala Lumpur as an example this paper will demonstrate the development of database and its application for development and building control. The application indicates that thefunctionality of GIS can be enhanced, i.e. by adding new model and analytical tools to existing systems and by using the GIS toolkit to best effect. Consequently it will be used to assist decision-making, taking into account among other things, the current scenarios of the proposed development, physical constraint and future impacts.
series DDSS
last changed 2003/08/07 16:36

_id a114
authors Faucher, Didier and Nivet, Marie-Laure
year 1998
title Playing with Design Intent: Integration of Physical and Urban Constraints in CAD
source Digital Design Studios: Do Computers Make a Difference? [ACADIA Conference Proceedings / ISBN 1-880250-07-1] Québec City (Canada) October 22-25, 1998, pp. 118-137
doi https://doi.org/10.52842/conf.acadia.1998.118
summary Our work deals with the exploration of a universe of forms that satisfy some design intents. That is, we substitute a “generate and test” approach for a declarative approach in which an object is created from its properties. In this paper we present an original method that takes into account design intents relative to sunlight, visibility and urban regulation. First of all we study how current CAD tools have considered these properties until now. Our conclusion is that the classical design / simulation / analysis process does not suit design practices, especially in the early stages. We think that an improved CAD system should offer the architect the option of manipulating abstract information such as design intents. We define an intent as a conceptual expression of constraints having an influence on the project. For instance, a visual intent will be stated with no reference to vision geometry: “ from this place, I want to see the front of the new building”. We show how to represent each of these constraints with a 3D volume associated to some characteristics. If some solutions exist, we are sure that they are included in these volumes. For physical phenomena we compute the volume geometry using the principles of inverse simulation. In the case of urban regulation we apply deduction rules. Design intents are solved by means of geometrical entities that represent openings or obstructions in the project. Computing constraint volumes is a way of guiding the architect in his exploration of solutions. Constraint volumes are new spaces that can restore the link between form and phenomenon in a CAD tool. Our approach offers the designer the possibility of manipulating design intents.

series ACADIA
email
last changed 2022/06/07 07:55

_id ddss9801
id ddss9801
authors Achten, Henri and Leeuwen, Jos van
year 1998
title A Feature-Based Description Technique for Design Processes: A Case Study
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary In order to develop appropriate tools for decision support in design processes, it is necessary to found them on an understanding of design. Analytical techniques of design processes that have a direct relationship with tool development can enhance design support systems development. The paper focuses on a design support system in the VR-DIS research program. The aim of this research program is to develop insight in the architectural design process and to establish design tools for architectsworking in Virtual Reality. The basic approach for data modelling in VR in this research is based on an extension of the Feature Based Modelling paradigm taken from design in mechanical engineering. The computer model of the design in the system is a Feature-based model. This paper describes design processes in terms of changes in the Feature-based model of the design. For this purpose, a case of a house design is used. Drawings in the conceptual design phase up to the preliminary design phase arestudied. Each state of the drawings is described in terms of a Feature-model. Particular design actions such as creation of spaces, definition of architectural elements, and changes during the design process can be expressed in terms of changes in the Feature-model. Because of the use of Features, the changes can be formalised in the VR-DIS system. The description in terms of Features offers an analytical toolthat leads to a functional brief for design support tools. The paper ends with a discussion of implications and future work.
series DDSS
last changed 2003/11/21 15:15

_id ddssar0203
id ddssar0203
authors Alkass, Sabah and Jrade, Ahmad
year 2002
title A Web-Based Virtual Reality Model for Preliminary Estimates of Hi-Rise Building Projects
source Timmermans, Harry (Ed.), Sixth Design and Decision Support Systems in Architecture and Urban Planning - Part one: Architecture Proceedings Avegoor, the Netherlands), 2002
summary Cost estimating of a construction project at its early stage is considered to be very important task since it will be used as a base to commit or otherwise not to commit funds to that project. Preparation of a reliableand realistic preliminary estimate to aid the decision makers to commit funds for a specific project is a complicated assignment. Traditional methods and operations produced unsatisfactory aid due to lack ofaccuracy especially in the pre-design stage of a project. This participates in the increase of percentage of bankruptcy in the construction industry, which has dramatically climbed up and ranked as 15 percent of thewhole bankruptcies claimed in Canada (Statistic Canada 1998). This paper presents a methodology for developing and a Web-based model to automate preliminary cost estimates for hi-rise buildings. This is achieved by integrating a database with design drawings in a Virtual Reality (VR) environment. The model will automatically generate preliminary estimates after modifying a 3D CAD drawing. It provides the user the option to visualize and simulate the drawing and its cost data through VR environment. Having done that, it will allow owners, architects and cost engineers to view a constructed building project, change its geometric objects and shapes, and accordingly generate a new conceptual cost estimate.
series DDSS
last changed 2003/11/21 15:15

_id ddss9803
id ddss9803
authors Arentze, T., Borgers, A. and Timmermans, H.
year 1998
title Extending spatial DSS with spatial choice models of multipurpose shopping trip behaviour
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary Spatial choice or interaction models have been widely used in spatial DSS or customised GIS for analysing the impacts of retail location plans. The models typically used, however, do not account for spatial agglomeration effects on spatial choice behaviour. This study develops a model system for analysing the impacts of retail plans based on a choice model of multipurpose behaviour developed in earlier work. The model system is implemented in the spatial DSS called Location Planner. An empirical study demonstrates the empirical estimation and use of the model for analysing the impacts of an expansion of floor space in the major shopping centre of a middle-sized city in The Netherlands. The results indicate that agglomeration effects as predicted by the model can have substantial impacts on the performance of retail systems. Therefore, it is argued that when incorporated in a spatial DSS, the more complex models have the potential to improve the use of these systems for impact analysis.
series DDSS
last changed 2003/11/21 15:16

_id ddss9804
id ddss9804
authors Assaf, S.
year 1998
title A Decision Support System (DSS) for Forward Housing Planning
source Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary This paper presents a specification of a Local Housing Strategy Decision Support System (LHS-DSS) (Conceptual and Physical model design). Emphasis throughout the design process is laid on the techniques that provide housing planners with accurate rapid assistance during the preparation process of local housing strategy. Relevant knowledge (descriptive, procedural, reasoning) and data about each step of the process, options for each situation as it arises, and a record of decisions made with underlying reasons are provided to system users. Three main components are identified to shape up the LHS-DSS: the language system for addressing housing problems; knowledge system which is responsible for gathering and accumulating the housing knowledge required; and problem processing system (an inquiry system) which produces suitable and effective recommendations to support the strategy preparation process.
series DDSS
last changed 2003/11/21 15:16

_id f288
authors Bille, Pia
year 1999
title Integrating GIS and Electronic Networks In Urban Design and Planning
source Architectural Computing from Turing to 2000 [eCAADe Conference Proceedings / ISBN 0-9523687-5-7] Liverpool (UK) 15-17 September 1999, pp. 722-728
doi https://doi.org/10.52842/conf.ecaade.1999.722
summary In 1998 I undertook an inquiry into the use of information technology in Urban Design and Planning in Danish municipalities and among planning consultants. The aim was to find out who was working with the IT and for what purposes it was used. In education there seems to be barriers to a full integration of the new media, and I wanted to find out if that was also the case in the practise of architects and planners. Surprisingly I discovered that there was a computer on almost every desk, - but there were big differences in the use of the technology. The investigation described here is based on interviews with planners in selected municipalities and with urban planning consultants, and the results have been summarised in a publication.
keywords Urban Planning, Electronic Collaboration, GIS, Data Bases
series eCAADe
email
last changed 2022/06/07 07:54

For more results click below:

this is page 0show page 1show page 2show page 3show page 4show page 5... show page 27HOMELOGIN (you are user _anon_217071 from group guest) CUMINCAD Papers Powered by SciX Open Publishing Services 1.002