Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 444

Reformat results as: short short into frame detailed detailed into frame

_id	ddss9815
id	ddss9815
authors	Cutler, Lorraine M.
year	1998
title	Prototypical Laboratory Design to Support Learning and Teaching
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Collaboration between designers and scientists is an unusual combination to undertake the prototypical design of a teaching laboratory funded by Howard Hughes Medical Institute. The zoologists are developing a cooperative learning and interactive teaching pedagogy to make learningscience a process of critical inquiry and discovery. The industrial and interior designers are paying attention to the design issues of function and environmental support for teaching and doing the work required in a three-hour, hands-on beginning science learning space. Using both qualitative andquantitative research methods, the designers are able to determine a framework for making design decisions in prototypical beginning science environments. This framework is being developed as a guideline for designing similar environments at other institutions of higher learning. Videotape analysis precedes the research to uncover the underlying problems of the existing space and to formulate the questions for the research. Elements of a case study and an evaluative study integratewith the design process to form the basis of an intensive investigation of design issues for a beginning science teaching laboratory. Using two pretests as a baseline, the posttest data evaluates the success orfailure of the prototypical design. Both the pretests and the posttest evaluate the physical attributes of the old and new learning environment related to a beginning laboratory course in Zoology at Arizona State University.
series	DDSS
last changed	2003/08/07 16:36

_id	3d1d
authors	De Vries, B. and Jessurun, A.J.
year	1998
title	An Experimental Design System for the Very Early Design Stage
source	Timmermans (ed.) Proceedings of the 4th Conference on Design and Decision Support Systems in Architecture and Urban Planning, Maastricht
summary	The concepts of the experimental design system that are discussed are feature modeling and geometrical constraints. The main technique for creating the user environment is Virtual Reality. Feature modeling forms the basis for managing the design data. To start with, data storage is implemented in a Relational Data Base Management System. Along with this a (traditional) interface is developed for managing the data. Data management consists of feature type creation and feature type instancing. Features are used to define building elements, their relationships and additional constraints. Apart from the design data, geometrical data are stored. Possible design solutions can be limited using geometrical constraints. Specifying connection types between building elements result in a set of solutions for the position of the bounding boxes of the building elements in space.
series	other
email
last changed	2003/04/23 15:50

_id	ddss9826
id	ddss9826
authors	Hendricx, A., Geebelen, B., Geeraerts, B. and Neuckermans, H.
year	1998
title	A methodological approach to object modelling in the architectural designprocess
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The paper describes a first prototype constructed in search for a central object model. It presents all possible data, concepts and operations concerning the architectural design process in the early phases.A central model of the process of design is essential: going from one design phase into another, the model describes geometrical shapes, abstract concepts like space and activity, concrete physical building elements and the basic operations all these entities undertake. Emphasis is put on combining all these different viewpoints, thus enabling the designer to use a broad range of design strategies. The aim is to help him and not steer or even hamper his creative process. Information necessary toassist the user of the system concerning energy calculation, stability checks etc can be extracted. By means of appropriate interfaces not only those tests built on top of the system but also existing software packages can make use of the model’s object structure. The implemented object model is one of the cornerstones of the IDEA+ project, aiming to provide an Integrated Design Environment for Architecture.
keywords	object model, building model, CAAD, IDEA+, MERODE
series	DDSS
last changed	2003/08/07 16:36

_id	ceca
authors	Schmidt, L.C. and Cagan, Jonathan
year	1998
title	Optimal Configuration Design: an Integrated Approach Using Grammars
source	Journal of Mechanical Design 120, no. 1: 2-9
summary	A computational approach to design that integrates conceptual design, configuration design, and component selection tasks overcomes some of the barriers to successful design automation. FFREADA is an implementation of a general design generation and optimization algorithm featuring hierarchical ordering of grammar based-design generation processes at different levels of abstraction. FFREADA is used to generate near-optimal hand-held power drill trains in a space which exceeding 200 million designs that are not limited to any particular functional architecture or component configuration. Drill power train designs within 1 percent of the optimal solution are found in minutes by sampling 302,000 design states on average. Optimal configurations are found for drills with three different torque requirements.
series	journal paper
last changed	2003/04/23 15:50

_id	62cc
authors	Seebohm, T. and Wallace, W.
year	1998
title	Rule-based representation of design in architectural practice
source	Automation in Construction 8 (1) (1998) pp. 73-85
summary	It is suggested that expert systems storing the design knowledge of particular offices in terms of stylistic and construction practice provide a means to take considerably more advantage of information technology than currently. The form of the knowledge stored by such expert systems is a building representation in the form of rules stating how components are placed in three-dimensional space relative to each other. By describing how Frank Lloyd Wright designed his Usonian houses it is demonstrated that the proposed approach is very much in the spirit of distinguished architectural practice. To illustrate this idea, a system for assembling three-dimensional architectural details is presented with particular emphasis on the nature of the rules and the form of the building components created by the rules to assemble typical details. The nature of the rules, which are a three-dimensional adaptation of Stiny's shape grammars, is described. In particular, it is shown how the rules themselves are structured into different classes, what the nature of these classes is and how specific rules can be obtained from more general rules. The rules embody a firm's collective design experience in detailing. As a conclusion, an overview is given of architectural practice using rule-based representations.
series	journal paper
more	http://www.elsevier.com/locate/autcon
last changed	2003/05/15 21:23

_id	ddss9862
id	ddss9862
authors	Vries, B. de and Jessurun, A.J.
year	1998
title	An experimental design system for the veryearly design stage
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	The concepts of the experimental design system that are discussed are feature modeling and geometrical constraints. The main technique for creating the user environment is Virtual Reality. Feature modeling forms the basis for managing the design data. To start with, data storage is implemented in a Relational Data Base Management System. Alongwith this a (traditional) interface is developed for managing the data. Data management consists of feature type creation and feature type instancing. Features are used to define building elements, their relationships and additional constraints. Apart from the design data, geometrical data are stored. Possible design solutions can be limited using geometrical constraints. Specifying connection types between building elements result in a set of solutions for the position of the bounding boxes of the building elements in space.
series	DDSS
last changed	2003/08/07 16:36

_id	avocaad_2001_17
id	avocaad_2001_17
authors	Ying-Hsiu Huang, Yu-Tung Liu, Cheng-Yuan Lin, Yi-Ting Cheng, Yu-Chen Chiu
year	2001
title	The comparison of animation, virtual reality, and scenario scripting in design process
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	Design media is a fundamental tool, which can incubate concrete ideas from ambiguous concepts. Evolved from freehand sketches, physical models to computerized drafting, modeling (Dave, 2000), animations (Woo, et al., 1999), and virtual reality (Chiu, 1999; Klercker, 1999; Emdanat, 1999), different media are used to communicate to designers or users with different conceptual levels¡@during the design process. Extensively employed in design process, physical models help designers in managing forms and spaces more precisely and more freely (Millon, 1994; Liu, 1996).Computerized drafting, models, animations, and VR have gradually replaced conventional media, freehand sketches and physical models. Diversely used in the design process, computerized media allow designers to handle more divergent levels of space than conventional media do. The rapid emergence of computers in design process has ushered in efforts to the visual impact of this media, particularly (Rahman, 1992). He also emphasized the use of computerized media: modeling and animations. Moreover, based on Rahman's study, Bai and Liu (1998) applied a new design media¡Xvirtual reality, to the design process. In doing so, they proposed an evaluation process to examine the visual impact of this new media in the design process. That same investigation pointed towards the facilitative role of the computerized media in enhancing topical comprehension, concept realization, and development of ideas.Computer technology fosters the growth of emerging media. A new computerized media, scenario scripting (Sasada, 2000; Jozen, 2000), markedly enhances computer animations and, in doing so, positively impacts design processes. For the three latest media, i.e., computerized animation, virtual reality, and scenario scripting, the following question arises: What role does visual impact play in different design phases of these media. Moreover, what is the origin of such an impact? Furthermore, what are the similarities and variances of computing techniques, principles of interaction, and practical applications among these computerized media?This study investigates the similarities and variances among computing techniques, interacting principles, and their applications in the above three media. Different computerized media in the design process are also adopted to explore related phenomenon by using these three media in two projects. First, a renewal planning project of the old district of Hsinchu City is inspected, in which animations and scenario scripting are used. Second, the renewal project is compared with a progressive design project for the Hsinchu Digital Museum, as designed by Peter Eisenman. Finally, similarity and variance among these computerized media are discussed.This study also examines the visual impact of these three computerized media in the design process. In computerized animation, although other designers can realize the spatial concept in design, users cannot fully comprehend the concept. On the other hand, other media such as virtual reality and scenario scripting enable users to more directly comprehend what the designer's presentation.Future studies should more closely examine how these three media impact the design process. This study not only provides further insight into the fundamental characteristics of the three computerized media discussed herein, but also enables designers to adopt different media in the design stages. Both designers and users can more fully understand design-related concepts.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	9bee
authors	Gerzso, J. Michael
year	2001
title	Automatic Generation of Layouts of an Utzon Housing System via the Internet
source	Reinventing the Discourse - How Digital Tools Help Bridge and Transform Research, Education and Practice in Architecture [Proceedings of the Twenty First Annual Conference of the Association for Computer-Aided Design in Architecture / ISBN 1-880250-10-1] Buffalo (New York) 11-14 October 2001, pp. 202-211
doi	https://doi.org/10.52842/conf.acadia.2001.202
summary	The article describes how architectural layouts can be automatically generated over the Internet. Instead of using a standard web server sending out HTML pages to browser client, the system described here uses an approach that has become common since 1998, known as three tier client/server applications. The server part of the system contains a layout generator using SPR(s), which stands for “Spatial Production Rule System, String Version”, a standard context- free string grammar. Each sentences of this language represents one valid Utzon house layout. Despite the fact that the system represents rules for laying out Utzon houses grammatically, there are important differences between SPR(s) and shape grammars. The layout generator communicates with Autocad clients by means of an application server, which is analogous to a web server. The point of this project is to demonstrate the idea that many hundreds or thousands of clients can request the generation of all of the Utzon layouts simultaneously over the Internet by the SPR(s) server, but the server never has to keep track when each client requested the generation of all of the layouts, or how many layouts each client has received.
keywords	Internet, Spatial-Production-Rules Grammars, Utzon
series	ACADIA
email
last changed	2022/06/07 07:51

_id	ddss9849
id	ddss9849
authors	Sariyildiz, S. Ciftcioglu, Ö. and Veer, Peter van der
year	1998
title	Information Ordering for decision support in building design
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	A systematic approach for the application of AI-based information processing for information ordering in architectural building design is described. For this purpose fuzzy associative memory (FAM) method is considered. In this system FAM is used for knowledge representation in building design concerning the functional & technical requirements information and its graded relevance to individuals concerned in the same context. A set of FAM rules having been established as a knowledge base for use, a pattern of information in the form of a fuzzy vector is fed to each FAM rule. Here, a decision support system is aimed to convey the information to the respective individuals and/or bodies involved, in a graded form, according to their capacity of involvement in the building design. By exploiting the binary logic, each FAM rule is fired in parallel but to a different degree so that each rule generates an m-dimensional output fuzzy vector Pi. The union of these vectors creates m-dimensional fuzzy decision vector D that provides the ordered information addressed to respective individuals and/or bodies mentioned. Using simulated data, a verification procedure for the performance of the approach is investigated and by means of the work, the role that artificial intelligence in architecture and building design might play, is pointed out.
series	DDSS
last changed	2003/08/07 16:36

_id	ddss9821
id	ddss9821
authors	Varghese, G., Dhingra, S.L. and Sikdar, P.K.
year	1998
title	The Role of Expert Systems, and RDBMS Strategies in a DSSfor Urban Bus Transport Management
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Efficient and well-managed urban bus transport systems supported by information systems with decision support capabilities developed within the framework of an advanced Relational Data Base Management System (RDBMS) can provide critical information at the right moment and assisttransport managers in conducting performance evaluations. This paper includes discussions on the use of the entity-relationship (E-R) model (a semantic data modeling technique) in the development of thestructure of the conceptual database for the information system planned to be implemented using RDBMS. The E-R data modeling approach enables database designers in obtaining the third normal forms of related databases for the efficient functioning of the information system. The inportance of decision tables in the development of DSS modules using Expert System shells are also discussed. The DSS modules will assist transport managers in the analysis of operational performance for bus depots or the organization as a whole. The E-R diagrams generated and the decision files developed will serve as important documents that can enhance the adaptability of the DSS to the changing needs ofthe organizations. The conceptualization of the information system to support decision-making in an RDBMS framework provides the advantage of a very low 'disk seek' time and facilitates frequent generation of reports.
series	DDSS
last changed	2003/08/07 16:36

_id	ba1b
authors	Schnier, T. and Gero, J.S.
year	1998
title	From Frank Lloyd Wright to Mondrian: Transforming evolving representations
source	I. Parmee (Ed.), Adaptive Computing in Design and Manufacture, Springer, London, pp. 207-219
summary	If a computer is to create designs with the goal of following a certain style it has to have information about this style. Unfortunately, the most often used method of formal representations of style, shape grammars, does not lend itself to automated implementation. However, It has been shown how an evolutionary system with evolving representation can provide an alternative approach that allows a system to learn style knowledge automatically and without the need for an explicit representation. This paper shows how the applicability of evolved representation can be extended by the introduction of transformations of the representation. One such transformation allows mixing of style knowledge, similar to the cross-breeding of animals of different races, with the added possibility of controlling exactly what features are used from which source. This can be achieved through different ways of mixing representations learned from different examples and then using the new, combined representation to create new designs. In a similar manner, information learned in one application domain can be used in a different domain. To achieve this, either the representation or the genotype-phenotype transformation has to be adapted. The same operations also allow mixing of knowledge from different domains. As an example, we show how style information learned from a set of Mondrian paintings can be combined with style information from a Frank Lloyd Wright window design, to create new window designs. Also, we show how the combined style information can then be used to create three-dimensional objects, showing style features similar to the newly designed windows.
keywords	Genetic Engineering, Learning
series	other
email
last changed	2003/04/06 09:02

_id	6672
authors	Af Klercker, Jonas
year	1998
title	A CAVE-Interface in CAAD-Education
source	Computerised Craftsmanship [eCAADe Conference Proceedings] Paris (France) 24-26 September 1998, pp. 110-115
doi	https://doi.org/10.52842/conf.ecaade.1998.110
summary	The so called "CAVE-interface" is a very interesting and thrilling development for architects! It supports a better illusion of space by exposing almost a 270° view of a computer model than the 60° which can be viewed on an ordinary computer screen. At the Lund University we have got the possibility to experiment with a CAVE-installation, using it in research and the education of CAAD. The technique and two experiments are discribed. The possibilities are discussed and some problems and questions are put forward.
series	eCAADe
more	http://www.paris-valdemarne.archi.fr/archive/ecaade98/html/31af_klercker/index.htm
last changed	2022/06/07 07:54

_id	ddss9803
id	ddss9803
authors	Arentze, T., Borgers, A. and Timmermans, H.
year	1998
title	Extending spatial DSS with spatial choice models of multipurpose shopping trip behaviour
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	Spatial choice or interaction models have been widely used in spatial DSS or customised GIS for analysing the impacts of retail location plans. The models typically used, however, do not account for spatial agglomeration effects on spatial choice behaviour. This study develops a model system for analysing the impacts of retail plans based on a choice model of multipurpose behaviour developed in earlier work. The model system is implemented in the spatial DSS called Location Planner. An empirical study demonstrates the empirical estimation and use of the model for analysing the impacts of an expansion of floor space in the major shopping centre of a middle-sized city in The Netherlands. The results indicate that agglomeration effects as predicted by the model can have substantial impacts on the performance of retail systems. Therefore, it is argued that when incorporated in a spatial DSS, the more complex models have the potential to improve the use of these systems for impact analysis.
series	DDSS
last changed	2003/11/21 15:16

_id	ddss9806
id	ddss9806
authors	Besio, M., Frixione, M. and Pedemonte, O.
year	1998
title	GIS technologies in the transfer of theknowledge project to the plan projectmultiple representation of the environmental spaces
source	Timmermans, Harry (Ed.), Fourth Design and Decision Support Systems in Architecture and Urban Planning Maastricht, the Netherlands), ISBN 90-6814-081-7, July 26-29, 1998
summary	An analysis is made of the relation between the conceptualand paradigmatic level of GIS technologies and the new forms of plan, whichmake environment the center of attention. The intention is to study newcriteria for zoning able to give contextual representations of theterritorial, environmental and landscape aspects of the geographical space,and also to study new legislative principles, able to establish integratedrules for theprojecting of soil uses, the safeguarding and recovery ofenvironmental systems and the tutelage and boosting of the landscape. The experimentation of GIS (Geographical Information System)technologies aims at the construction of systems helping to make decisionsfor the control of the environmental and landscape aspects of theterritory. An analysis is made of the ways in which there are formulated thedescriptions of the various aspects of the environment: the conceptsthrough which knowledge is expressed, the languages used forrepresentations, the cognitive models adopted. GIS technologies have made it possible to represent in an explicitmanner the paradigms underlying the various models of knowledge.Specifically, the following cognitive models have been developed:- ecological models of nature- ecological models of human settlement- ecological models of inhabitants’ mental perceptions
series	DDSS
last changed	2003/11/21 15:16

_id	2796
authors	Brown, Andy and Lee, Hwa, Ryong
year	1998
title	A Mental Space Model
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 27-42
summary	The architectural design process is often characterised a series of evolving ideas, and involving a cyclical process between design and visualisation. However, the nature of the internal representation still remains unclear. What is actually represented in a designers mental space and what drives and influences the mental design process? If we wish to programme a computer to mimic or work in tandem with the mental processes involved we need to make that representation and the associated cognitive processes explicit. The ways that designers form mental representations are so diverse, personal, and often transient that it is not easy to externalise and articulate them in explicit terms. In order to propose a mental model, we can take in a particular I psychological research approach; that of introspective observation from design drawing . In doing so, we posit an assumption that the designer's drawing can be seen as an extension of the internal mental feature, and hence internal representation could be inferred from the analysis of external representation - the drawing or sketch. This approach contrasts with the protocol analysis approach where mental operations are inferred from words, what could be termed thinking aloud.
series	plCAD
email
last changed	2003/05/17 10:01

_id	7a20
id	7a20
authors	Carrara, G., Fioravanti, A.
year	2002
title	SHARED SPACE’ AND ‘PUBLIC SPACE’ DIALECTICS IN COLLABORATIVE ARCHITECTURAL DESIGN.
source	Proceedings of Collaborative Decision-Support Systems Focus Symposium, 30th July, 2002; under the auspices of InterSymp-2002, 14° International Conference on Systems Research, Informatics and Cybernetics, 2002, Baden-Baden, pg. 27-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2005/03/30 16:25

_id	6279
id	6279
authors	Carrara, G.; Fioravanti, A.
year	2002
title	Private Space' and ‘Shared Space’ Dialectics in Collaborative Architectural Design
source	InterSymp 2002 - 14th International Conference on Systems Research, Informatics and Cybernetics (July 29 - August 3, 2002), pp 28-44.
summary	The present paper describes on-going research on Collaborative Design. The proposed model, the resulting system and its implementation refer mainly to architectural and building design in the modes and forms in which it is carried on in advanced design firms. The model may actually be used effectively also in other environments. The research simultaneously pursues an integrated model of the: a) structure of the networked architectural design process (operators, activities, phases and resources); b) required knowledge (distributed and functional to the operators and the process phases). The article focuses on the first aspect of the model: the relationship that exists among the various ‘actors’ in the design process (according to the STEP-ISO definition, Wix, 1997) during the various stages of its development (McKinney and Fischer, 1998). In Collaborative Design support systems this aspect touches on a number of different problems: database structure, homogeneity of the knowledge bases, the creation of knowledge bases (Galle, 1995), the representation of the IT datum (Carrara et al., 1994; Pohl and Myers, 1994; Papamichael et al., 1996; Rosenmann and Gero, 1996; Eastman et al., 1997; Eastman, 1998; Kim, et al., 1997; Kavakli, 2001). Decision-making support and the relationship between ‘private’ design space (involving the decisions of the individual design team) and the ‘shared’ design space (involving the decisions of all the design teams, Zang and Norman, 1994) are the specific topic of the present article. Decisions taken in the ‘private design space’ of the design team or ‘actor’ are closely related to the type of support that can be provided by a Collaborative Design system: automatic checks performed by activating procedures and methods, reporting of 'local' conflicts, methods and knowledge for the resolution of ‘local’ conflicts, creation of new IT objects/ building components, who the objects must refer to (the ‘owner’), 'situated' aspects (Gero and Reffat, 2001) of the IT objects/building components. Decisions taken in the ‘shared design space’ involve aspects that are typical of networked design and that are partially present in the ‘private’ design space. Cross-checking, reporting of ‘global’ conflicts to all those concerned, even those who are unaware they are concerned, methods for their resolution, the modification of data structure and interface according to the actors interacting with it and the design phase, the definition of a 'dominus' for every IT object (i.e. the decision-maker, according to the design phase and the creation of the object). All this is made possible both by the model for representing the building (Carrara and Fioravanti, 2001), and by the type of IT representation of the individual building components, using the methods and techniques of Knowledge Engineering through a structured set of Knowledge Bases, Inference Engines and Databases. The aim is to develop suitable tools for supporting integrated Process/Product design activity by means of a effective and innovative representation of building entities (technical components, constraints, methods) in order to manage and resolve conflicts generated during the design activity.
keywords	Collaborative Design, Architectural Design, Distributed Knowledge Bases, ‘Situated’ Object, Process/Product Model, Private/Shared ‘Design Space’, Conflict Reduction.
series	other
type	symposium
email
last changed	2012/12/04 07:53

_id	avocaad_2001_02
id	avocaad_2001_02
authors	Cheng-Yuan Lin, Yu-Tung Liu
year	2001
title	A digital Procedure of Building Construction: A practical project
source	AVOCAAD - ADDED VALUE OF COMPUTER AIDED ARCHITECTURAL DESIGN, Nys Koenraad, Provoost Tom, Verbeke Johan, Verleye Johan (Eds.), (2001) Hogeschool voor Wetenschap en Kunst - Departement Architectuur Sint-Lucas, Campus Brussel, ISBN 80-76101-05-1
summary	In earlier times in which computers have not yet been developed well, there has been some researches regarding representation using conventional media (Gombrich, 1960; Arnheim, 1970). For ancient architects, the design process was described abstractly by text (Hewitt, 1985; Cable, 1983); the process evolved from unselfconscious to conscious ways (Alexander, 1964). Till the appearance of 2D drawings, these drawings could only express abstract visual thinking and visually conceptualized vocabulary (Goldschmidt, 1999). Then with the massive use of physical models in the Renaissance, the form and space of architecture was given better precision (Millon, 1994). Researches continued their attempts to identify the nature of different design tools (Eastman and Fereshe, 1994). Simon (1981) figured out that human increasingly relies on other specialists, computational agents, and materials referred to augment their cognitive abilities. This discourse was verified by recent research on conception of design and the expression using digital technologies (McCullough, 1996; Perez-Gomez and Pelletier, 1997). While other design tools did not change as much as representation (Panofsky, 1991; Koch, 1997), the involvement of computers in conventional architecture design arouses a new design thinking of digital architecture (Liu, 1996; Krawczyk, 1997; Murray, 1997; Wertheim, 1999). The notion of the link between ideas and media is emphasized throughout various fields, such as architectural education (Radford, 2000), Internet, and restoration of historical architecture (Potier et al., 2000). Information technology is also an important tool for civil engineering projects (Choi and Ibbs, 1989). Compared with conventional design media, computers avoid some errors in the process (Zaera, 1997). However, most of the application of computers to construction is restricted to simulations in building process (Halpin, 1990). It is worth studying how to employ computer technology meaningfully to bring significant changes to concept stage during the process of building construction (Madazo, 2000; Dave, 2000) and communication (Haymaker, 2000).In architectural design, concept design was achieved through drawings and models (Mitchell, 1997), while the working drawings and even shop drawings were brewed and communicated through drawings only. However, the most effective method of shaping building elements is to build models by computer (Madrazo, 1999). With the trend of 3D visualization (Johnson and Clayton, 1998) and the difference of designing between the physical environment and virtual environment (Maher et al. 2000), we intend to study the possibilities of using digital models, in addition to drawings, as a critical media in the conceptual stage of building construction process in the near future (just as the critical role that physical models played in early design process in the Renaissance). This research is combined with two practical building projects, following the progress of construction by using digital models and animations to simulate the structural layouts of the projects. We also tried to solve the complicated and even conflicting problems in the detail and piping design process through an easily accessible and precise interface. An attempt was made to delineate the hierarchy of the elements in a single structural and constructional system, and the corresponding relations among the systems. Since building construction is often complicated and even conflicting, precision needed to complete the projects can not be based merely on 2D drawings with some imagination. The purpose of this paper is to describe all the related elements according to precision and correctness, to discuss every possibility of different thinking in design of electric-mechanical engineering, to receive feedback from the construction projects in the real world, and to compare the digital models with conventional drawings.Through the application of this research, the subtle relations between the conventional drawings and digital models can be used in the area of building construction. Moreover, a theoretical model and standard process is proposed by using conventional drawings, digital models and physical buildings. By introducing the intervention of digital media in design process of working drawings and shop drawings, there is an opportune chance to use the digital media as a prominent design tool. This study extends the use of digital model and animation from design process to construction process. However, the entire construction process involves various details and exceptions, which are not discussed in this paper. These limitations should be explored in future studies.
series	AVOCAAD
email
last changed	2005/09/09 10:48

_id	fb22
authors	Chien, Sheng-Fen
year	1998
title	Supporting information navigation in generative design systems
source	Camegie Mellon University, School of Architecture
summary	Generative design systems make it easier for designers to generate and explore design altematives, but the amount of information generated during a design session can become very large. Intelligent navigation aids are needed to enable designers to access the information with ease. Such aids may improve the usability of generative design systems and encourage their use in architectural practice. This dissertation presents a comprehensive approach to support navigation in generative design systems. This approach takes account of studies related to human spatial cognition, wayfinding in physical environments, and information navigation in electronic media. It contains a general model of design space, basic navigation operations, and principles for designing navigation support. The design space model describes how the space may grow and evolve along predictable dimensions. The basic operations facilitate navigation activities in this multi-dimensional design space. The design principles aim at guiding system developers in creating navigation utilities tailored to the needs of individual design systems. This approach is validated through prototype implementations and limited pilot usability studies. The validity of the design space model and basic navigation operations is examined through the development of a design space navigation framework that encapsulates the model and operations in a software environment and provides the infrastructure and mechanisms for supporting navigation. Three prototype navigation tools are implemented using this framework. These tools are subjected to usability studies. The studies show that these tools are easy to leam and are efficient in assisting designers locating desired information. In summary, it can be demonstrated that through the prototype implementations and usability studies, this approach offers sufficient support for the design and implementation of navigation aids in a generative design system. The research effort is a pioneer study on navigation support in generative design systems. It demonstrates why navigation support is necessary; how to provide the support; and what types of user interaction it can offer. This research contributes to information navigation studies not only in the specific domain of generative design system research, but also in the general field of human-computer interaction.
series	thesis:PhD
email
last changed	2003/02/12 22:37

_id	4d6f
authors	Chodorowski, Franciszek
year	1998
title	From Inversive Perspective to Virtual Space
source	Cyber-Real Design [Conference Proceedings / ISBN 83-905377-2-9] Bialystock (Poland), 23-25 April 1998, pp. 43-52
summary	Looking back at history, considering the proportions taken up by the particular developments of the future vision of an architectural work, one observes that the main method used was based on a form of drawing in the perpendicular projection in the form of "planes", cross sections and elevations. However, the research considering the threedimensional approach of the design solution, took into consideration a model made of wood, plaster or paper. The supplementary works in the form of an axonometric or a perspective drawing were not usually the domain of architects. Such way of presenting space was used by artists: painters and sculptors. The rapid development taking place in the use of computers in preparing architectural design documentation makes one reflect on many issues. Modern software, apart from making it possible to develop projections, cross sections and elevations, allows the presentation of a three dimensional vision of an architectural solution on the basis of axonometry, perspective and a study of virtual space. Despite the obvious progress facilitating the graphic editing process of design work, the initial design phase is an unchanged process, similar to past times ' It is based on transferring the creative invention onto paper by means of handmade sketches, similarly to making an inventory measurement note.
series	plCAD
last changed	1999/04/08 17:16

For more results click below: